--- capa/capa51/GUITools/quizzer.tcl 1999/10/28 16:32:07 1.6 +++ capa/capa51/GUITools/quizzer.tcl 2000/08/07 20:47:29 1.19 @@ -1,6 +1,29 @@ +# student quiz editor and assembly tool +# Copyright (C) 1992-2000 Michigan State University +# +# The CAPA system is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of the +# License, or (at your option) any later version. +# +# The CAPA system is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public +# License along with the CAPA system; see the file COPYING. If not, +# write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, +# Boston, MA 02111-1307, USA. +# +# As a special exception, you have permission to link this program +# with the TtH/TtM library and distribute executables, as long as you +# follow the requirements of the GNU GPL in regard to all of the +# software in the executable aside from TtH/TtM. + ########################################################### # quizzer.tcl - -# Copyright Guy Albertelli II 1996 +# Created Guy Albertelli II 1996 ########################################################### set gTclVer 4.0 @@ -287,7 +310,7 @@ proc createInfoWindow {} { label $about.l1 -font 12x24 -text "Quizzer $gVer" -pady 20 label $about.l4 -font 8x13 -text "Quizzer.tcl version $gTclVer" -pady 20 label $about.l6 -font 8x13 -text "$gCompileDate" - message $about.l2 -font 8x13 -text "Code by: Y. Tsai, G. Albertelli II Copyright Michigan State University Board of Trustees, 1992-1999, No Unauthorized Commercial Use" \ + message $about.l2 -font 8x13 -text "Code by: Y. Tsai, G. Albertelli II Copyright Michigan State University Board of Trustees, 1992-2000, CAPA is released under to GNU GPL v2, and comes WITHOUT ANY WARRENTY, see COPYING for details" \ -pady 20 -aspect 300 label $about.l3 -font 8x13 -textvariable gDate label $about.l5 -font 8x13 -textvariable gCmd @@ -641,6 +664,7 @@ proc getProbValTryVal {} { ########################################################### # updateDateBox ########################################################### +# sticks the date information from gControlDates into the date listbox ########################################################### ########################################################### proc updateDateBox { listbox } { @@ -665,7 +689,11 @@ proc loadDates { listbox } { global gControlDates if { [catch {getHeaderInfo}]} { displayError "That set.db does not exist" - } + } else { + if { [llength $gControlDates] > 2 } { + set gControlDates [linsert [lreverse [lrange $gControlDates 1 end]] 0 [lindex $gControlDates 0]] + } + } updateDateBox $listbox } @@ -819,6 +847,50 @@ proc getday { kind } { } ########################################################### +# moveUpDate +########################################################### +########################################################### +########################################################### +proc moveUpDate { listbox } { + global gControlDates gDates + if { ![winfo exists $listbox] } { return } + if { [set which [$listbox curselection]] == "" } { + displayMessage "Please select a date to move." + return + } + if { $which > 1 } { + set element [lindex $gControlDates $which] + set gControlDates [lreplace $gControlDates $which $which] + set gControlDates [linsert $gControlDates [expr $which - 1] $element] + updateDateBox $listbox + $listbox selection set [expr {$which - 1}] + $listbox see [expr {$which -1}] + } +} + +########################################################### +# moveDownDate +########################################################### +########################################################### +########################################################### +proc moveDownDate { listbox } { + global gControlDates gDates + if { ![winfo exists $listbox] } { return } + if { [set which [$listbox curselection]] == "" } { + displayMessage "Please select a date to move." + return + } + if { ($which > 0) && ($which < ([llength $gControlDates]-1)) } { + set element [lindex $gControlDates $which] + set gControlDates [lreplace $gControlDates $which $which] + set gControlDates [linsert $gControlDates [expr $which + 1] $element] + updateDateBox $listbox + $listbox selection set [expr {$which + 1}] + $listbox see [expr {$which + 1}] + } +} + +########################################################### # enableDateValidation ########################################################### ########################################################### @@ -948,7 +1020,7 @@ proc createDateDialog { toplevel makedef checkbutton $optionsFrame2.response -variable gDates(inhibitresponse) \ -text "Inhibit Correct/Incorrect response \n(normally only for exams/quizzes)" pack $durationFrame $optionsFrame2.view $optionsFrame2.response -side top - set gDates(viewbetween) 1 + set gDates(viewbetween) 0 set gDates(inhibitresponse) 0 label $durationFrame.label -text "Duration" @@ -965,8 +1037,7 @@ proc createDateDialog { toplevel makedef button $buttonFrame.cancel -text "Cancel" -command "set gPrompt2(ok) 0" set gDates(optBut) [ button $buttonFrame.options -text "More Options" \ -command "addDateOptions"] - pack $buttonFrame.help $buttonFrame.set $buttonFrame.cancel $buttonFrame.options \ - -side left + pack $buttonFrame.set $buttonFrame.cancel $buttonFrame.options -side left bind $toplevel "set gPrompt2(ok) 0" bind $toplevel "getday open;getday due;getday answer" bind $toplevel {tkTabToWindow [tk_focusNext %W]} @@ -1096,7 +1167,7 @@ proc changeDate { listbox } { } } capaGrab release $changeDate - bind $changeDate "" + catch {bind $changeDate ""} destroy $changeDate if {$gPrompt2(ok) == 1 } { addCurrentDates $listbox $makedefault $which @@ -1147,7 +1218,7 @@ proc addDate { listbox } { } } capaGrab release $addDate - bind $addDate "" + catch {bind $addDate ""} destroy $addDate if {$gPrompt2(ok) == 1 } { addCurrentDates $listbox $makedefault @@ -1182,9 +1253,11 @@ proc createDBHeader {} { message $dialog.msg -text "Header Information" -aspect 1000 set loadFrame [frame $dialog.loadFrame -borderwidth 4 -relief sunken] set infoFrame [frame $dialog.infoFrame -borderwidth 4 -relief sunken] + label $dialog.message -text "Later entries will override earlier entries" set optionFrame [frame $dialog.options] set buttonFrame [frame $dialog.buttons -bd 10] - pack $dialog.msg $loadFrame $infoFrame $optionFrame $buttonFrame -side top -fill x + pack $dialog.msg $loadFrame $dialog.message $infoFrame $optionFrame \ + $buttonFrame -side top -fill x set legendFrame [frame $infoFrame.legendFrame] set listFrame [frame $infoFrame.listFrame] @@ -1198,12 +1271,16 @@ proc createDBHeader {} { set listbox [listbox $listFrame.list -width 63 -yscrollcommand "$listFrame.scroll set" ] scrollbar $listFrame.scroll -command "$listbox yview" pack $listFrame.list $listFrame.scroll -side left + pack configure $listFrame.scroll -fill y updateDateBox $listbox button $commandFrame.add -text "Add" -command "addDate $listbox" button $commandFrame.change -text "Change" -command "changeDate $listbox" button $commandFrame.delete -text "Delete" -command "deleteDate $listbox" - pack $commandFrame.add $commandFrame.change $commandFrame.delete -side left + button $commandFrame.moveup -text "MoveUp" -command "moveUpDate $listbox" + button $commandFrame.movedown -text "MoveDown" -command "moveDownDate $listbox" + pack $commandFrame.add $commandFrame.change $commandFrame.delete \ + $commandFrame.moveup $commandFrame.movedown -side left bind $listbox "changeDate $listbox" message $loadFrame.msg -text "Load header information from set:" \ @@ -1252,6 +1329,9 @@ proc createDBHeader {} { destroy $dialog if {$gPrompt(ok) == 1 } { updateDiscussion + if { [llength $gControlDates] > 2 } { + set gControlDates [linsert [lreverse [lrange $gControlDates 1 end]] 0 [lindex $gControlDates 0]] + } eval updateHeader [ eval concat $gControlDates ] } @@ -1580,7 +1660,7 @@ proc replaceAll {} { set gCreateImportLinks 1 getFindWindow refNum if { $refNum >= 0 } { registerCreateImportLinks $refNum 0.0 end } - displayMessage "Replaced $num occurance$s" + displayMessage "Replaced $num occurrence$s" } ########################################################### @@ -1800,7 +1880,7 @@ proc createPrefsWindow {} { if { [winfo exists .prefs] } { capaRaise .prefs; return } set prefs [toplevel .prefs] - $gWindowMenu add command -label "Prefrences" -command "capaRaise $prefs" + $gWindowMenu add command -label "Prefernces" -command "capaRaise $prefs" wm title $prefs "Preferences" set frameAll [frame $prefs.frameAll -relief groove -borderwidth 4] @@ -1844,7 +1924,7 @@ proc createPrefsWindow {} { button $frameButton.config -text "Reread capa.config" -command "rereadCapaConfig" button $frameButton.ok -text "Dismiss" -command "destroy $prefs trace vdelete gWhichFile w changePrefFile - removeWindowEntry Prefrences" + removeWindowEntry Prefernces" bind $prefs "removeWindowEntry Preferences" button $frameButton.save -text "Save All" -command "savePrefs" pack $frameButton.impcolor $frameButton.commentcolor $frameButton.config \ @@ -1971,6 +2051,11 @@ proc checkHeader { numberParsed } { # if { $gFirstTime } { set gFirstTime 0; return } set gLoadHeaderSet $gSetNumberText set error [catch {getHeaderInfo}] + catch { + if { [llength $gControlDates] > 2 } { + set gControlDates [linsert [lreverse [lrange $gControlDates 1 end]] 0 [lindex $gControlDates 0]] + } + } if { $error == 1 } { set gHeaderQCount "0" set gControlDates "" @@ -3005,11 +3090,15 @@ proc trackChanges { procName num } { set chars \[ .$procName get \$insertindex \$insertindex2 \] } set gUndo($num.\$numChange) \"insert \$insertindex \[list \$chars\] \" - if {\[regexp \{.*\[\"/\].*\} \$chars\] || \ - \[regexp \{.*\[\"/\].*\} \[.$procName get \"\$insertindex linestart\" \"\$insertindex2 lineend\"\]\]} { - registerCreateImportLinks $num \$insertindex \$insertindex2 + if { \[string length \$chars\] > 100 } { + registerCreateImportLinks $num \$insertindex-1line \$insertindex2+1line + } else { + if {\[regexp \{.*\[\"/\].*\} \$chars\] || \ + \[regexp \{.*\[\"/\].*\} \[.$procName get \"\$insertindex linestart\" \"\$insertindex2 lineend\"\]\]} { + registerCreateImportLinks $num \$insertindex \$insertindex2 + } } - } + } set result \[uplevel .$procName \$args\] updateLocation $num return \$result @@ -3573,10 +3662,11 @@ proc printWindow {} { pack $print.msg $oneSetFrame $moreSetFrame $buttonFrame -side top pack configure $oneSetFrame $moreSetFrame -anchor w -fill x + set msg2Frame [frame $moreSetFrame.msg2 -relief solid -borderwidth 2] set infoFrame [frame $moreSetFrame.frame1] - set setFrame [frame $moreSetFrame.frame2 -relief solid -borderwidth 1] - pack $infoFrame $setFrame - pack configure $infoFrame $setFrame -anchor w + set msg3Frame [frame $moreSetFrame.msg3 -relief solid -borderwidth 2] + set setFrame [frame $moreSetFrame.frame2] + pack $msg2Frame $setFrame $msg3Frame $infoFrame -anchor w if {[catch {set gPrintSelection(sets)}]} {set gPrintSelection(sets) printCur} if {[catch {set gPrintSelection(type)}]} {set gPrintSelection(type) printSpecific} @@ -3608,6 +3698,7 @@ proc printWindow {} { bind $print "removeWindowEntry Print" pack $buttonFrame.ok $buttonFrame.cancel -side left + set msgFrame [frame $oneSetFrame.msg -relief solid -borderwidth 2] set currentDviFrame [frame $oneSetFrame.currentDvi] set currentPreviewFrame [frame $oneSetFrame.currentPreview] set randomFrame [frame $oneSetFrame.random] @@ -3615,11 +3706,18 @@ proc printWindow {} { set sectionFrame [frame $infoFrame.section] set multSectionFrame [frame $infoFrame.multsection] set wholeClassFrame [frame $infoFrame.wholeClass] - pack $currentDviFrame $currentPreviewFrame $randomFrame $specificFrame \ + pack $msgFrame $currentDviFrame $currentPreviewFrame $randomFrame $specificFrame \ $sectionFrame $multSectionFrame $wholeClassFrame -anchor w \ -side top pack configure $specificFrame -expand true -fill both + label $msgFrame.msg -text "Select:" + pack $msgFrame.msg -anchor w + label $msg2Frame.msg -text "Or Select:" + pack $msg2Frame.msg -anchor w + label $msg3Frame.msg -text "For:" + pack $msg3Frame.msg -anchor w + radiobutton $currentDviFrame.currentDvi -text "Print current .dvi" \ -value "printCurrentDvi" -variable gPrintSelection(type) pack $currentDviFrame.currentDvi -side left @@ -3785,7 +3883,10 @@ proc createCreateDviWin {} { # sends the file quiztemp.ps to the printer through lpr using # the option foud in gLprCommand ########################################################### -# Arguments: none +# Arguments: lprCommand - actual command to be run to print +# showCompletionMessage - (defaults to 1 true) +# controls whether the print complete +# message gets shown # Returns: Nothing # Globals: gCapaConfig - # gStopPrinting - @@ -3795,11 +3896,11 @@ proc printBody { lprCommand { showComple global gCapaConfig gStopPrinting gDonePrinting set errorMsg "" - set error [ catch {exec $gCapaConfig(dvips_command) quiztemp.dvi \ + set error [ catch {eval exec $gCapaConfig(dvips_command) quiztemp.dvi \ -o quiztemp.ps >& /dev/null} errorMsg ] if { $error } { displayError \ - "When attempting to run dvips an error occured : $errorMsg" + "When attempting to run dvips an error occurred : $errorMsg" return 1 } @@ -3814,7 +3915,7 @@ proc printBody { lprCommand { showComple set error [catch {set returnMessage [eval "exec $lprCommand"] } errorMsg ] if { $error == 1 } { - displayError "When attempting to print an error occured : $errorMsg" + displayError "When attempting to print an error occurred : $errorMsg" return 1 } else { if { $showCompletionMessage } { @@ -4070,12 +4171,14 @@ proc printSection { { lprCommand "" } } default { set type "-T" } } + set prSection [string trimleft $gPrintSelection(section) 0] + if { [set gStopPrinting [expr 2 == [runLatex \ "echo [pwd] | $gCapaConfig(qzparse_command) \ - -sec $gPrintSelection(section) -set $set \ + -sec $prSection -set $set \ -d [pwd] -c [pwd] $type " gCreateDviText] ] ] } { for {set i $start} { $i <= $end} { incr i } { - exec rm -f section$gPrintSelection(section)-set$i.tex + exec rm -f section$prSection-set$i.tex } if {$showStopping} { displayMessage "Printing has been stopped." @@ -4092,7 +4195,7 @@ proc printSection { { lprCommand "" } } } for { set i $start} { $i <= $end } { incr i } { - if { ! [file exists section$gPrintSelection(section)-set$i.tex] } { + if { ! [file exists section$prSection-set$i.tex] } { if {$showStopping} { displayError "The qzparse command: $gCapaConfig(qzparse_command), was unable to produce the expected output. Printing stopped" set gStopPrinting 0 @@ -4101,7 +4204,7 @@ proc printSection { { lprCommand "" } } return 2 } - exec mv section$gPrintSelection(section)-set$i.tex quiztemp.tex + exec mv section$prSection-set$i.tex quiztemp.tex exec /bin/rm -f quiztemp.dvi $gCreateDviText insert end "$gCapaConfig(latex_command)\n" @@ -4381,7 +4484,7 @@ proc analyzeClass { {start 1} } { set name [lindex $gAnalyze(toprocess) 1] set section [lindex $gAnalyze(toprocess) 2] set gAnalyze(toprocess) [lrange $gAnalyze(toprocess) 3 end] - set command "$gCapaConfig(answers_command) $number \"$name\" $section $gAnalyze(set)" + set command "$gCapaConfig(answers_command) $number \"$name\" 0 $gAnalyze(set)" set fileId [open "|$command" "r"] set gAnalyze(pid) [pid $fileId] fconfigure $fileId -blocking 0 @@ -4662,7 +4765,7 @@ proc analyzeStop {} { global gAnalyze set gAnalyze(stop) 1 set gAnalyze(status) "Stopped" - exec kill -SIGKILL $gAnalyze(pid) + catch {exec kill -SIGKILL $gAnalyze(pid)} } ###########################################################