--- doc/build/Attic/install.html	2000/11/17 23:18:00	1.6
+++ doc/build/Attic/install.html	2001/12/01 21:34:48	1.11
@@ -1,101 +1,51 @@
-<HTML>
-<HEAD>
-<TITLE>LON-CAPA Installation</TITLE>
-</HEAD>
-<BODY>
-<H1>LON-CAPA Installation</H1>
-<H3>Current Installation Procedure</H3>
-<P>
+<!-- The LearningOnline Network with CAPA -->
+<!-- $Id: install.html,v 1.11 2001/12/01 21:34:48 harris41 Exp $ -->
+<html>
+<head>
+<title>LON-CAPA Installation</title>
+</head>
+<body>
+<h1>LON-CAPA Installation</h1>
+<h3>Current Installation Procedure</h3>
+<p>
 Scott Harrison
-</P>
-<P>
-Last updated: 11/01/2000
-</P>
-<P>
-This is the current list of steps to support LON-CAPA installation.  These steps have
-been tested.
-<OL>
-<LI>Get Redhat 6.2 on a CD by
-<UL>
-<LI>Using a RedHat 6.2 CD
-<LI>Downloading a RedHat 6.2 <A HREF="http://install.lon-capa.org/3.1/currentcdimage">CD image</A> and burning a CD
-<LI>Or, alternatively do a network install from a <A HREF="http://install.lon-capa.org/3.1/currentcdsource">
-RedHat 6.2 CD source tree</A>.  You need to burn a boot floppy disk with a network boot image;
-<A HREF="http://install.lon-capa.org/3.1/currentcdsource/images/bootnet-20000407.img">
-bootnet-20000407.img</A>.  (Download the image file; insert a blank floppy disk; and type a
-command similar to: <TT>dd if=bootnet-20000407.img of=/dev/fd0</TT>).  For installation, you
-need to specify <TT>hobbes.lite.msu.edu/~loninst</TT> as your download URL, and <TT>/3.1/currentcdsource</TT>
-as the source location.
-</UL>
-<LI>Install RedHat 6.2
-<UL>
-<LI><B>Important: Do a "GNOME Workstation Install" and go with their default list of packages</B>
-<LI><B>Important: Make sure you add a user "www"</B>
-</UL>
-<LI>After installation, install extra RPMs/upgrades by downloading all files from
-<A HREF="http://install.lon-capa.org/3.1/SupplementalRPMS/">
-http://install.lon-capa.org/3.1/SupplementalRPMS</A>.
-<UL>
-<LI>Use this command to install the RPMs you download: <TT>rpm -Uvh --force *.rpm</TT>.
-</UL>
-<LI>Remove extra RPMs by downloading and running the script 
-<A HREF="http://install.lon-capa.org/3.1/scripts/remove_extra.sh">
-http://install.lon-capa.org/3.1/scripts/remove_extra.sh</A> as root.
-<LI>After installing the supplemental RPMS, install a final RPM set by downloading all files from
-<A HREF="http://install.lon-capa.org/3.1/FinalRPMS/">
-http://install.lon-capa.org/3.1/FinalRPMS</A>.
-<UL>
-<LI>Use this command to install the RPMs you download: <TT>rpm -Uvh --force *.rpm</TT>.
-</UL>
-<LI>Configure needed files.
-<UL>
-<LI>Currently, reconfiguration must be handled manually and involves an administrator
-altering configuration files present throughout the system.  For a list of these
-files and their descriptions, visit <A HREF="http://install.lon-capa.org/3.1/loncapafiles/loncapafiles.html">
-http://install.lon-capa.org/3.1/loncapafiles/loncapafiles.html</A>.
-</UL>
-<LI>Important files are /etc/httpd/conf/access.conf, /etc/ntp.conf, /etc/krb.conf,  
-/home/httpd/lonTabs/spare.tab, /home/httpd/lonTabs/hosts.tab (if setting up a cluster different
-than MSU's).
-<LI>Unshadow passwords
-<UL>
-<PRE>You can do this by these 5 steps:
-1. enter the system command, as "root", pwunconv
-2. enter the system command, as "root", grpunconv
-3. Set the following to be the /etc/pam.d/login file on your system
-#%PAM-1.0
-auth       required     /lib/security/pam_securetty.so
-auth       required     /lib/security/pam_pwdb.so shadow nullok
-auth       required     /lib/security/pam_nologin.so
-account    required     /lib/security/pam_pwdb.so
-password   required     /lib/security/pam_cracklib.so
-password   required     /lib/security/pam_pwdb.so nullok use_authtok
-session    required     /lib/security/pam_pwdb.so
-session    optional     /lib/security/pam_console.so
-4. Set the following to be the /etc/pam.d/passwd file on your system
-#%PAM-1.0
-auth       required     /lib/security/pam_pwdb.so shadow nullok
-account    required     /lib/security/pam_pwdb.so
-password   required     /lib/security/pam_cracklib.so retry=3
-password   required     /lib/security/pam_pwdb.so use_authtok nullok
-5. Set/reset passwords.  As "root" use 'passwd', and 'passwd www'
-to change the important passwords.  This creates crypt-processible
-passwords in /etc/passwd.
-</PRE>
-</UL>
-<LI>Run, as root, <TT>ln -s /etc/mime.types /etc/httpd/conf/mime.types</TT>
-<LI>Run, as root, <TT>/etc/rc.d/init.d/httpd start</TT>.
-<LI>Run, as root, <TT>/etc/rc.d/init.d/loncontrol start</TT>.
-<LI>After 10 minutes, you should be able to check the file <TT>/home/httpd/html/lon-status/index.html</TT>
-to see if your machine has been successfully set up.
-</UL>
-</OL>
-</P>
-<H3>Future Installation Procedure (not yet implemented)</H3>
-<P>
-In the future, LON-CAPA Installation will be distributed on a CD complete with a
-customized interface.  Many elements for doing this have been coded, and are in place, but
-it awaits completion.
-</P>
-</BODY>
-</HTML>
+</p>
+<p>$Date: 2001/12/01 21:34:48 $; $Revision: 1.11 $</p>
+<p>
+This is the current list of steps to support LON-CAPA installation.  These
+steps have been tested.</p>
+<ol>
+<li>Get LON-CAPA on a CD by
+<ul>
+<li>Requesting a LON-CAPA installation CD (c/o Helen Keefe, 
+helen@lon-capa.org).</li>
+<li>Or, downloading a LON-CAPA installation
+<a href="http://install.lon-capa.org/3.1/currentcdimage">CD image</A> and
+burning a CD.</li>
+<li>(Depending on whether your computer has a bootable CD-ROM, you may
+need to also make a boot floppy.  Download this floppy disk image file: 
+<a href=
+"http://install.lon-capa.org/3.1/currentcdsource/images/boot-20000407.img">
+boot-20000407.img</a>.  (Download the image file; insert a blank floppy disk;
+and type this command: <tt>dd if=boot-20000407.img of=/dev/fd0</tt>).</li>
+</ul></li>
+<li>Install with CD-ROM
+<ul>
+<li>Follow the <A HREF="instructions_with_cd.html">
+CD-ROM installation instructions</a></li>
+</ul></li>
+<li>After installation, restart the computer.  Login as root.  Enter this
+command (you only need to do this after your first reboot):
+<ol>
+<li><tt>sh /usr/sbin/loncapa_configure</tt></li>
+</ol></li>
+</ol>
+<hr />
+<p>
+You can also try to install LON-CAPA on an existing installation of
+RedHat 6.2.  Please see <a
+href='how_to_install_loncapa_on_a_preinstalled_system.txt'>
+how_to_install_loncapa_on_a_preinstalled_system.txt</a>.
+</p>
+</body>
+</html>
