Annotation of doc/build/RHEL5_install.frag, revision 1.5

1.1       albertel    1: <h1>Installing LON-CAPA on a minimal Red Hat Enterprise Linux 5 System</h1>
                      2: <p>
                      3: This document guides you through the process of setting up a new LON-CAPA
1.5     ! bisitz      4: server running Red Hat Enterprise Linux 5 with a minimum of packages installed.
        !             5: The computer will be configured solely as a LON-CAPA server and will be
1.1       albertel    6: expected to have no other services running.  Your server is expected to have
                      7: a reasonably fast connection to the internet.
                      8: </p><p>
1.5     ! bisitz      9: More information is available at
1.1       albertel   10: <a href="http://install.lon-capa.org/">http://install.lon-capa.org/</a>.
                     11: </p>
                     12: 
                     13: <h2>Before you begin</h2>
                     14: <p>
                     15: Installing Linux is getting easier and easier.
                     16: You will be required to log in to the machine and execute
1.5     ! bisitz     17: some routine Unix commands.  Familiarity with the Apache web server, mod_perl,
1.1       albertel   18: perl, and MySQL are not required to install and run LON-CAPA.
                     19: </p>
                     20: 
                     21: <h2>Installation Overview</h2>
                     22: <p>
                     23: The installation process takes the following steps:
                     24: </p>
                     25: <ol>
1.5     ! bisitz     26:   <li><a href="#obt">Obtain Red Hat Enterprise Linux 5 installation CDs</a></li>
        !            27:   <li><a href="#net">Determine Network Settings</a></li>
        !            28:   <li><a href="#lin">Install Red Hat Enterprise Linux 5</a></li>
        !            29:   <li><a href="#upd">Update your system</a></li>
        !            30:   <li><a href="#ilc">Install LON-CAPA</a></li>
        !            31:   <li><a href="#cdc">Create a Domain Coordinator</a></li>
        !            32:   <li><a href="#sts">Start/Restart services</a></li>
        !            33:   <li><a href="#log">Log in to LON-CAPA</a></li>
1.1       albertel   34: </ol>
1.5     ! bisitz     35: <hr />
        !            36: <h2>1. <a name="obt">Obtain Red Hat Enterprise Linux 5 CDs</a></h2>
1.1       albertel   37: <p>
1.5     ! bisitz     38: RHEL5 CDs can be purchased from Red Hat:
1.1       albertel   39: <a href="http://redhat.com/">http://redhat.com/</a>.
                     40: For the minimal install on 32-bit architecture you will need only the first CD.
1.2       albertel   41: For the minimal install on 64-bit architecture you will need CDs 1, 2, and 4.
1.1       albertel   42: 
1.5     ! bisitz     43: </p>
1.1       albertel   44: 
1.5     ! bisitz     45: <h2>2. <a name="net">Determine Network Settings</a></h2>
1.1       albertel   46: <p>
1.5     ! bisitz     47: You will need to know the following network settings for your installation.
1.1       albertel   48: <b>Note:</b>You must have a static IP address to use LON-CAPA.
                     49: DHCP is <em>not</em> supported.
                     50: 
                     51: <ul>
                     52:   <li>ip address </li>
                     53:   <li>netmask </li>
                     54:   <li>hostname </li>
                     55:   <li>gateway </li>
                     56:   <li>domain name server(s) </li>
                     57: </ul>
                     58: 
1.5     ! bisitz     59: <h2>3. <a name="lin">Minimal  Red Hat Enterprise Linux 5 Install</a></h2>
1.1       albertel   60: <p>
                     61: Installing Red Hat Enterprise Linux is quite easy if you've installed any of the Red Hat products
                     62: before. Documentation is available from
                     63: <a href="http://www.redhat.com/docs/manuals/enterprise/">
                     64: http://www.redhat.com/docs/manuals/enterprise/</a>
1.5     ! bisitz     65: Most of the installation screens are self explanatory.
1.1       albertel   66: There are a few steps that require comment and are dealt with below.
                     67: </p>
                     68: <dl style="list-style:square outside none">
1.3       www        69:    <dt>Installation Language</dt>
                     70:    <dd>Use English as your installation language.</dd>
1.1       albertel   71:    <dt>Installation Type</dt>
                     72:    <dd>If this is a fresh install choose "Install Red Hat Enterprise Linux Server". If updating from a previous LON-CAPA installation on an earlier Redhat or Fedora version you may prefer to choose the upgrade option, although if you established a separate partition for /home it will be faster to perform an install instead of an upgrade, and use "Create Custom Layout" to set up partitions - making sure to select the "unchanged data" option for the /home partition, in order to preserve your existing LON-CAPA data. A full back-up to tape or some external system is also strongly advised when updating the operating system in use on an existing LON-CAPA server.</dd>
                     73: 
                     74:    <dt>Partitioning your Drive</dt>
                     75:    <dd>For a fresh install may want to use the automatic partitioning feature of the installer,
                     76:        however you should review the results and be prepared to modify them.  If you want to customize partitioning use "Create Custom Layout".
                     77:        LON-CAPA resource files are stored in the /home directory, so the
1.5     ! bisitz     78:        majority of the disk space should be allocated here.  If you have 20 GB
        !            79:        of space for RHEL, /home should receive at least 10 to 12 gigs.
1.1       albertel   80:        Since MySQL uses the /var filesystem to store its databases you should
1.5     ! bisitz     81:        have at least 4 gigs of space available on /var.  Be sure to
1.1       albertel   82:        include adequate swap space.  A minimum is 512 Megs, but you should
                     83:        typically have 1 or 2x as much swap space as you do physical RAM.</dd>
                     84: 
                     85:    <dt>Network Configuration</dt>
1.5     ! bisitz     86:    <dd>LON-CAPA will <b>not</b> work with a machine set up to use a dynamic
1.1       albertel   87:        IP address.  When configuring your network card, be sure to unselect
                     88:        the DHCP option and enter in your network information.</dd>
                     89:    <dt>Software</dt>
                     90:    <dd>Click the "Customize Now" radio button and for a minimal install uncheck all packages except "Base" in the Base System category.  If you leave other packages checked in any of the other categories, you'll need additional ISO CDs.</dd>
                     91: </dl>
                     92: <p>
                     93: 
                     94: Finish installing your server, reboot it, and log in as root. The
                     95: first time you log-in, the Setup Agent will be displayed. (If you exit it early you can enter it again buy running the command
                     96: <pre>
                     97: setup
                     98: </pre>
                     99:  This should tool be used to configure the Firewall and SELinux.
                    100: 
                    101:   <dt>Firewall Configuration</dt>
                    102: 
                    103:    <dd>Select Security Level: Enabled, and Customize, to allow
                    104:        incoming: SSH (remote login), WWW (HTTP) and secure WWW
                    105:        (HTTPS). (LON-CAPA also will use ports 5663 and 8080, but the
                    106:        loncontrol startup script should open and close thos ports
                    107:        itself.)
                    108:    </dd>
1.5     ! bisitz    109:    <dd> Set SELinux to Disabled.</dd>
1.1       albertel  110:    <dd> Select OK, and then Quit</dd>
                    111: </p>
                    112: 
1.5     ! bisitz    113: <h2>4. <a name="upd">Update your system</a></h2>
1.1       albertel  114: <p>
                    115: Update your system to the latest versions of the system software using yum.
                    116: </p>
                    117: <pre>
                    118: yum update
                    119: </pre>
                    120: <p>
                    121: Reboot your system before continuing with the installation.
                    122: </p>
                    123: <p>
                    124: Retrieve the rhel5_loncapa_yum file from the LON-CAPA install site:
                    125: </p>
                    126: <pre>
                    127: wget http://install.loncapa.org/versions/redhat/5Server/rhel5_loncapa_yum.conf
                    128: </pre>
                    129: <p>
                    130: Install the rhel5_loncapa_yum.conf
                    131: </p>
                    132: <p>
                    133: <pre>
                    134: mv /etc/yum.conf /etc/yum.conf.backup
                    135: cp rhel5_loncapa_yum.conf /etc/yum.conf
                    136: yum update
                    137: </pre>
                    138: </p>
1.5     ! bisitz    139: <h2>5. <a name="ilc">Installing LON-CAPA</a></h2>
1.1       albertel  140: <h3>Install prerequisites</h3>
                    141: <p> Execute: </p>
                    142: <pre>
                    143: yum install LONCAPA-prerequisites
                    144: </pre><p>
                    145: This may take a moment due to LON-CAPA's large number of dependencies.
                    146: </p>
                    147: <h3>Retrieve and execute LON-CAPA setup program</h3>
                    148: <p>
                    149: Retrieve the LON-CAPA setup with the following command:
                    150: </p>
                    151: <pre>
                    152: wget http://install.loncapa.org/versions/redhat/5Server/rhel5_install.tar
                    153: </pre>
                    154: <p>
                    155: Extract the archive with the following command:
                    156: </p>
                    157: <pre>
                    158: tar xf rhel5_install.tar
                    159: </pre>
                    160: <p>
                    161: This creates a directory named <tt>installation</tt>.  Change to it and
                    162: execute the setup script with the following commands:
                    163: </p>
                    164: <pre>
                    165: cd installation
                    166: ./install.pl
                    167: </pre>
                    168: <p>
                    169: This script will prompt you for the MySQL root password and will download the latest LON-CAPA release.<br />
                    170: You can safely ignore the following warnings from gcc 4 when compiling pwauth:<br />
                    171: <tt>
                    172: pwauth.c: In function ‘lastlog’:
                    173: <ul>
                    174: <li>pwauth.c:541: warning: incompatible implicit declaration of built-in function ‘strncpy’</li>
                    175: <li>pwauth.c:543: warning: incompatible implicit declaration of built-in function ‘strlen’</li>
                    176: </ul>
                    177: pwauth.c: In function ‘main’:
                    178: <ul>
                    179: <li>pwauth.c:692: warning: incompatible implicit declaration of built-in function ‘strlen’</li>
                    180: </ul>
                    181: </tt>
                    182: 
                    183: </p>
                    184: 
                    185: <h3>Determine LON-CAPA Settings</h3>
                    186: <p>
                    187: LON-CAPA requires a number of identifying parameters to be set in order
                    188: for it to function at all.  Below is a list with descriptions.
                    189: </p>
                    190: <dl>
                    191:   <dt>Host Type (library or access)</dt>
                    192:   <dd>The server must be designated a 'library' or an 'access' server.  In
                    193:       general you should have a library server for your instructors to create
                    194:       their course content on and run their courses.  Students should connect
1.5     ! bisitz    195:       to access servers.  If you are doing the first install of LON-CAPA at
1.1       albertel  196:       your site, or if you are playing with it for your own edification you
                    197:       should make your machine a 'library' server.</dd>
                    198:   <dt>LON-CAPA domain</dt>
                    199:   <dd>Each site or school which installs LON-CAPA needs its own domain.
                    200:       Here at MSU we use 'msu'.  You should choose something short but
1.5     ! bisitz    201:       meaningful.  <i>Restriction: One word, no hyphens, underscores, or
        !           202:       special characters.</i><br />Domain names which include a departmental
1.1       albertel  203:       abbreviation are not recommended as although LON-CAPA may start in
                    204:       a single department, other departments frequently join subsequently.
                    205:       For a domain name: 'msu' is a superior choice to 'msuphys' for example.
                    206:   </dd>
                    207:   <dt>LON-CAPA host id</dt>
                    208:   <dd>Each LON-CAPA server requires a unique internal name.  We use names
1.5     ! bisitz    209:       such as "msul1" for the first library server. <i>Restriction: One word,
1.1       albertel  210:       no hyphens, underscores, or special characters.</i>
                    211:   </dd>
                    212:   <dt>Domain's Primary Library Server ID</dt>
                    213:    <dd>If you are setting up a domain with a single library server, then the domain's primary library server ID will be the LON-CAPA host id of that server (e.g., msul1). Once your domain grows and you need to add more servers, one of the library servers in the domain should be assigned as the domain's primary library server.  This will be where domain-wide settings will be stored.<dd>
                    214:   <dt>Host administrator email</dt>
                    215:   <dd>The amount of email sent to this address is relatively minimal.  Messages
1.5     ! bisitz    216:       are sent every time the system starts up, or if the system is in
1.1       albertel  217:       serious trouble. On a laptop, make this <tt>root@localhost</tt>.
                    218:   </dd>
                    219:   <dt>Support email address</dt>
1.5     ! bisitz    220:   <dd>If you enter an e-mail address here, then users of the system
        !           221:       will be able to click an "Ask Helpdesk" link in the system to
1.1       albertel  222:       display a web form which they will complete to request support from
1.5     ! bisitz    223:       your institution's helpdesk. On form submission the contents
        !           224:       will be sent to the e-mail address you specify.
1.1       albertel  225:   </dd>
                    226: </dl>
                    227: 
                    228: <h3>Configuring LON-CAPA</h3>
                    229: <p>
                    230: To configure and install LON-CAPA, execute the following commands:
                    231: </p>
                    232: <pre>
                    233: cd /root/loncapa-N.N     (N.N should correspond to a version number like '1.3')
                    234: ./UPDATE
                    235: </pre>
                    236: <p>
1.5     ! bisitz    237: You will need to enter the LON-CAPA configuration information you determined
        !           238: in the previous section.
1.1       albertel  239: </p>
                    240: 
1.5     ! bisitz    241: <h2>6. <a name="cdc">Creating a Domain Coordinator</a></h2>
1.1       albertel  242: <p>
                    243: You will need at least one user at your site who has the role of
                    244: 'domain coordinator'.  This user creates accounts for other users and
                    245: grants them additional privileges.  The make_domain_coordinator.pl script
                    246: invoked below requires that you enter the users password.  The password will
                    247: show in plaintext as you type it.  Feel free to use the "passwd username"
1.5     ! bisitz    248: command to change it later.  Replace USERNAME and DOMAIN with an
1.1       albertel  249: appropriate user name and your domain.
                    250: </p>
                    251: <pre>
                    252: cd /root/loncapa-N.N/loncom/build
                    253: perl make_domain_coordinator.pl USERNAME DOMAIN
                    254: (WILL PROMPT FOR PASSWORD HERE)
                    255: </pre>
                    256: 
1.5     ! bisitz    257: <h2>7. <a name="sts">Start/Restart Services</a></h2>
1.1       albertel  258: <p>
                    259: The LON-CAPA network services take a moment to start.  Most misconfigurations
                    260: will be apparent at this step.
                    261: </p>
                    262: <pre>
                    263: /etc/init.d/loncontrol start
                    264: /etc/init.d/httpd start
                    265: </pre>
                    266: <p>
                    267: If you receive warnings when starting the httpd about missing perl modules,
1.5     ! bisitz    268: please make sure you followed the instructions in
1.1       albertel  269: <b>Installing LON-CAPA Dependencies</b>.  If you still have errors, please
1.4       raeburn   270: contact the MSU LON-CAPA group.
1.1       albertel  271: </p>
1.5     ! bisitz    272: <h2>8. <a name="log">Log in to your LON-CAPA Machine</a></h2>
1.1       albertel  273: <p>
                    274: Point a web browser at your new machine and log in as the domain
                    275: coordinator.  Congratulations!
                    276: </p>
                    277: 
1.5     ! bisitz    278: <hr />
1.1       albertel  279: <h2>If things aren't working right</h2>
                    280: <p>
1.5     ! bisitz    281: If you've followed the steps above and the server doesn't start or you think
1.4       raeburn   282: there's something wrong, please send a <a href="http://help.loncapa.org/help">help request</a> to the MSU LON-CAPA group.  If there were errors in installation of the dependency RPMs or errors during the
1.1       albertel  283: automatic setup, please send us as much information as possible.
                    284: If some part of this document is unclear please let us know.
                    285: </p>

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>