--- doc/build/suse10.1_install.frag 2006/10/09 21:12:16 1.1 +++ doc/build/suse10.1_install.frag 2008/12/10 19:57:29 1.4 @@ -1,7 +1,7 @@ -

Installing LON-CAPA on a minimal SuSE Linux Enterprise Server (SLES) 10

+

Installing LON-CAPA on a minimal SuSE Linux 10.1 System

This document guides you through the process of setting up a new LON-CAPA -server running SuSE Linux Enterprise Server 10 (SLES 10) with a minimum of packages installed. +server running SuSE Linux 10.1 with a minimum of packages installed. The computer will be configured solely as a LON-CAPA server and will be expected to have no other services running. Your server is expected to have a reasonably fast connection to the internet. @@ -12,10 +12,7 @@ More information is available at

Before you begin

-Installing Linux is getting easier and easier. -You will be required to log in to the machine and execute -some routine Unix commands. Familiarity with the Apache web server, mod_perl, -perl, and MySQL are not required to install and run LON-CAPA. +Installing Linux is getting easier and easier. You will be required to log in to the machine and execute some routine Unix commands. Familiarity with the Apache web server, mod_perl, perl, and MySQL are not required to install and run LON-CAPA.

Installation Overview

@@ -23,9 +20,9 @@ perl, and MySQL are not required to inst The installation process takes the following steps:

    -
  1. Obtain SLES 10 installation media
  2. +
  3. Obtain SuSE 10.1 installation media (DVD, or CDs)
  4. Determine Network Settings
  5. -
  6. Install SLES 10
  7. +
  8. Install Suse 10.1
  9. Update your system
  10. Install LON-CAPA
  11. Create a Domain Coordinator
  12. @@ -33,11 +30,10 @@ The installation process takes the follo
  13. Log in to LON-CAPA
-

Obtain SuSE Linux Enterprise Server 10

+

Obtain SuSE Linux 10.1

-SuSE ISO files can be obtained from the Novell site: http://www.novell.com/products/server/. +A SuSE 10.1 iso for burning to DVD can be obtained from the Novell download site: http://download.novell.com/index.jsp, or from an opensuse mirror site - http://en.opensuse.org/Mirrors_Released_Version. You will also find links there to sites with iso files for burning to CD, if burning CDs is more convenient for you.

-

Determine Network Settings

You will need to know the following network settings for your installation. @@ -52,16 +48,18 @@ DHCP is not supported.

  • domain name server(s)
  • -

    Minimal SLES 10 Install

    +

    Minimal SuSE 10.1 Install

    -Installing SuSE Linux Enterprise Server is quite easy if you've installed Linux products +Installing SuSE 10.1 is quite easy if you've installed Linux products before. Some documentation is available from - -http://www.novell.com/documentation/sles10/.

    + +http://www.novell.com/documentation/suse101/.

    Most of the subsequent installation screens are self explanatory. There are a few steps that require comment and are dealt with below.

    +
    Desktop Selection
    +
    Click Select and choose Text Mode
    Partitioning your Drive
    For a LON-CAPA library server (i.e., the main server used for permanent storage of course and user data), @@ -69,61 +67,72 @@ There are a few steps that require comme simplifies future upgrades of the operating system. If you are adding an additional access server to an existing LON-CAPA domain, this does not apply as no - permanent data are stored on an access server. + permenent data are stored on an access server. As LON-CAPA resource files are stored in the /home directory, the majority of the disk space should be allocated here. - If you have 20 GB of space for SLES10, /home should + If you have 20 GB of space for SuSE 10.1, /home should receive at least 10 to 12 gigs. Since MySQL uses the /var filesystem to store its databases you should have as least 4 gigs of space available on /var. Be sure to include adequate swap space. A minimum is 512 Megs, but you should typically have 1 or 2x as much swap space as you do physical RAM.
    -
    Software Selection
    -
    - Installation of the minimum set of packages is recommended. This will involve unchecking all checkboxes except for the base SuSE installation.

    Once you system has rebooted, you will use yast to complete the configuration. Change the following settings:

    +
    Firewall
    +
    Enable the firewall, and allow the the following services: web services (http and https) and login services (secure shell). Use the "Expert" option to open the following ports for TCP services: 8080 5663.
    +

    +

    Network Configuration
    LON-CAPA will not work with a machine set up to use a dynamic - IP address. When configuring your network card, you should include you static IP address, netmask, host name information (e.g., host name = tmp1, domain = lite.msu.edu), as well as name servers and gateway. + IP address. When configuring your network card, you should include host name information (e.g., host name = tmp1, domain = lite.msu.edu), as well as name server. Other settings (ip address, gateway, netmask will have been set when you included them in the boot configuration).
    -
    Online update
    -
    Indicate "Yes" when prompted to "run online update now?"
    +
    Registration
    +
    It is recommended that you register your server with Novell, for future updates during the installation process, however it is recommended that you indicate "No" when prompted to "run online update now?" after completing the registration process.

    -Finish installing your server, read the "readme", reboot and log in as root. -

    -

    Configure Firewall Settings

    -

    After reboot you should start yast, and select Security and Users -> Firewall. At step 2 include the following services: HTTP, HTTP with SSL, and Secure Shell. Use the "Expert..." option to add additional TCP services on ports 5663 and 8080. +Finish installing your server, read the "readme", reboot and log in as root. Follow the instructions found in the article: Wrestling Zen to Work to fix package management and to run the online update, and lastly ensure that the zen management daemon is running by executing:

    +
    +/etc/init.d/novell-zmd start
    +

    Change software sources for your system

    +

    If you do not already have a SuSE 10.1 installation source at your location, you may want to consider creating one from the 5 iso files for CDs 1 - 5. Proceed as follows (e.g., for 32 bit):

    +
    +mkdir -p suse101/CD1
    +mount -o ro,loop SUSE-Linux-10.1-GM-i386-CD1.iso /mnt
    +cp -rv /mnt/* suse101/CD1
    +umount /mnt
    +
    +

    +Repeat those steps with CD2, CD3, CD4 and CD5.

    -You will use yast to import packages required for LON-CAPA.
    +Next you will use yast to import packages required for LON-CAPA.
    Execute:

     yast
     

    -Select "Change Source of Installation". The media you used to install SLES10 will be listed as an installation source. You may also wish to create a local repository by copying the contents of the RPM directories on the five CDs to a local directory to avoid the need to flip CDs during LON-CAPA installation. Information about building a local repository is available at:http://portal.suse.com/sdb/en/2004/02/yast_instsrc.html. +Select "Installation Source" and change to either point at an internet installation repository close to your location (see http://en.opensuse.org/Mirrors_Released_Version), or a local institutional source you have built from the SuSE 10.1 CDs, or if using a DVD you may prefer to continue to point at the installation DVD.

    Add an additional installation source

    -

    Add the LON-CAPA SLES 10 repository as an additional installation source, so software installation in yast will have access to two repositories - a SuSE/Novell source (for packages included for the standard distribution) and the LON-CAPA repository (for extra packages needed to run LON-CAPA). For the LON-CAPA source you will use: +

    Add the LON-CAPA SuSE 10.1 repository as an additional installation source. once this is done, software installation in yast should then have access to three repositories - a YUM source for SuSE updates (established when you run online update from yast), an installation source (for packages included in the standard distribution) and the LON-CAPA repository (for extra packages needed to run LON-CAPA). For the LON-CAPA source you will use:

    Protocol
    HTTP
    Server Name
    install.loncapa.org
    Directory on server
    -
    suse/sles10/
    +
    suse/10.1/
    Authentication
    Anonymous
    -After saving this configuration information for the LON-CAPA repository, quit yast. +After saving this configuration information for the LON-CAPA repository, you will need to import a public LON-CAPA key, before the catalog is read, and the repository is available to you. Quit yast.

    +

    Installing LON-CAPA

    Install prerequisites

    Execute:

    @@ -133,16 +142,16 @@ This may take a moment due to LON-CAPA's
     

    Retrieve and execute LON-CAPA setup program

    -Retrieve the LON-CAPA setup with one of the following commands: +Retrieve the LON-CAPA setup with the following command:

    -wget http://install.loncapa.org/versions/suse/sles10/sles10_install.tar
    +wget http://install.loncapa.org/versions/suse/10.1/suse10.1_install.tar
     

    Extract the archive with the following command:

    -tar xf sles10_install.tar
    +tar xf suse10.1_install.tar
     

    This creates a directory named installation. Change to it and @@ -191,17 +200,13 @@ for it to function at all. Below is a l To configure and install LON-CAPA, execute the following commands:

    -cd /root/loncapa-N.N.N     (N.N.N should correspond to a version number like '2.2.2')
    +cd /root/loncapa-N.N     (N.N should correspond to a version number like '2.2.2')
     ./UPDATE
     

    You will need to enter the LON-CAPA configuration information you determined in the previous section.

    -

    After installing LON-CAPA, and taking any actions included in the WARNINGS file created during installation, it is recommended that you set loncontrol to start automatically on boot, by executing the following command:

    -
    -/sbin/chkconfig --level 345 loncontrol on
    -

    Creating a Domain Coordinator

    You will need at least one user at your site who has the role of @@ -220,7 +225,7 @@ perl make_domain_coordinator.pl USERNAME

    Start/Restart Services

    The LON-CAPA network services take a moment to start. Most misconfigurations -will be apparent at this step. +will be appearant at this step.

     /etc/init.d/loncontrol start
    @@ -230,7 +235,7 @@ will be apparent at this step.
     If you receive warnings when starting the httpd about missing perl modules,
     please make sure you followed the instructions in 
     Installing LON-CAPA Dependencies.  If you still have errors, please
    -contact the LON-CAPA support team.
    +contact the MSU LON-CAPA group.
     

    Log in to your LON-CAPA Machine

    @@ -240,9 +245,9 @@ coordinator. Congratulations!

    If things aren't working right

    If you've followed the steps above and the server doesn't start or you think -there's something wrong, please get in touch with the LON-CAPA support team. +there's something wrong, please get in touch with the MSU LON-CAPA group. You can submit a help request using our web form:
    -http://support.loncapa.org/help/
    +http://help.loncapa.org/help/
    If there were errors in installation of the dependency RPMs or during the automatic setup, please send us as much information as possible. If some part of this document is unclear please let us know.