Annotation of doc/loncapafiles/buildfiles.lpml, revision 1.24
1.1 harris41 1: <!DOCTYPE lpml PUBLIC "-//TUX/DTD lpml 1.0 Final//EN"
2: "http://lpml.sourceforge.net/DTD/lpml.dtd">
3: <!-- buildfiles.lpml -->
4:
1.24 ! raeburn 5: <!-- $Id: buildfiles.lpml,v 1.23 2008/12/26 22:59:53 raeburn Exp $ -->
1.1 harris41 6:
7: <!--
8:
9: Copyright Michigan State University Board of Trustees
10:
11: This file is part of the LearningOnline Network with CAPA (LON-CAPA).
12:
13: LON-CAPA is free software; you can redistribute it and/or modify
14: it under the terms of the GNU General Public License as published by
15: the Free Software Foundation; either version 2 of the License, or
16: (at your option) any later version.
17:
18: LON-CAPA is distributed in the hope that it will be useful,
19: but WITHOUT ANY WARRANTY; without even the implied warranty of
20: MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21: GNU General Public License for more details.
22:
23: You should have received a copy of the GNU General Public License
24: along with LON-CAPA; if not, write to the Free Software
25: Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
26:
27: /home/httpd/html/adm/gpl.txt
28:
29: http://www.lon-capa.org/
30:
31: -->
32:
33: <!-- Default values must be defined before specific values. -->
34: <!-- If no 'dist' attribute is specified, then it is always installed. -->
35: <!-- If 'dist' attribute is set to 'default', then the specification. -->
36: <!-- is accepted if an alternative distribution is not requested or not -->
37: <!-- defined. -->
38:
39: <lpml>
40: <specialnotices>
41: <specialnotice dist='default'>
42: </specialnotice>
43: </specialnotices>
44: <targetroot>/build</targetroot>
45: <sourceroot>/home/user/loncapa/</sourceroot>
46: <categories>
47: <category name="system file" type="runtime">
48: <chmod dist='default'>0644</chmod><chown dist='default'>root:root</chown>
49: <abbreviation>systemfile</abbreviation>
50: </category>
51: <category name="system file" type="development">
52: <chmod dist='default'>0644</chmod><chown dist='default'>root:root</chown>
53: <abbreviation>systemfile</abbreviation>
54: </category>
55: <category name="standard" type="runtime">
56: <chmod dist='default'>0755</chmod><chown dist='default'>root:root</chown>
57: <abbreviation>directory</abbreviation>
58: </category>
59: <category name="standard" type="development">
60: <chmod dist='default'>0755</chmod><chown dist='default'>root:root</chown>
61: <abbreviation>directory</abbreviation>
62: </category>
63: </categories>
64: <directories>
65: </directories>
66: <files>
67: <file>
68: <source>loncom/build/Makefile</source>
69: <target dist='default'>Makefile</target>
70: <categoryname>system file</categoryname>
71: <description>
72: Makefile for LON-CAPA
73: </description>
74: <note>
75: </note>
1.5 albertel 76: <dependencies>
77: doc/loncapafiles/configurable.gif;
78: doc/loncapafiles/directory.gif;
79: doc/loncapafiles/emptydirectory.gif;
80: doc/loncapafiles/graphicfile.gif;
81: doc/loncapafiles/handler.gif;
82: doc/loncapafiles/interfacefile.gif;
83: doc/loncapafiles/link.gif;
84: doc/loncapafiles/rootscript.gif;
85: doc/loncapafiles/script.gif;
86: doc/loncapafiles/setuid.gif;
87: doc/loncapafiles/static.gif;
88: doc/loncapafiles/systemfile.gif
89: </dependencies>
1.1 harris41 90: </file>
91: <file>
92: <source>doc/loncapafiles/loncapafiles.lpml</source>
93: <target dist='default'>loncapafiles.lpml</target>
94: <categoryname>system file</categoryname>
95: <description>
96: Describes the files that implement LON-CAPA on the filesystem
97: </description>
98: <note>
99: </note>
100: </file>
101: <file>
102: <source>doc/loncapafiles/buildfiles.lpml</source>
103: <target dist='default'>buildfiles.lpml</target>
104: <categoryname>system file</categoryname>
105: <description>
106: Describes the files that implement the building of LON-CAPA inside the source
107: file tree.
1.6 harris41 108: </description>
109: <note>
110: </note>
111: </file>
112: <file>
113: <source>doc/loncapafiles/installfiles.lpml</source>
114: <target dist='default'>installfiles.lpml</target>
115: <categoryname>system file</categoryname>
116: <description>
117: Describes the files that help automate LON-CAPA installations on specific
118: operating systems.
1.1 harris41 119: </description>
120: <note>
121: </note>
122: </file>
123: <file>
1.14 albertel 124: <source>doc/loncapafiles/modify_config_files.piml</source>
125: <target dist='default'>modify_config_files.piml</target>
126: <categoryname>system file</categoryname>
127: <description>
128: Post-installation of MySQL and yum config files
129: </description>
130: <note>
131: </note>
132: </file>
133: <file>
1.1 harris41 134: <source>doc/loncapafiles/webserver.piml</source>
135: <target dist='default'>webserver.piml</target>
136: <categoryname>system file</categoryname>
137: <description>
138: Post-installation of web server configuration files
1.3 albertel 139: </description>
140: <note>
141: </note>
142: </file>
143: <file>
144: <source>doc/loncapafiles/reseval_fixup.piml</source>
145: <target dist='default'>reseval_fixup.piml</target>
146: <categoryname>system file</categoryname>
147: <description>
148: Migrates reseval.db to nohist_eseval.db, deletes useless hist file
1.8 matthew 149: </description>
150: <note>
151: </note>
152: </file>
153: <file>
1.15 albertel 154: <source>doc/loncapafiles/clean_file_permissions.piml</source>
155: <target dist='default'>clean_file_permissions.piml</target>
156: <categoryname>system file</categoryname>
157: <description>
158: Executes clean_db.pl on each file_permisions.db file to remove erroneuos keys.
159: </description>
160: <note>
161: </note>
162: </file>
163: <file>
1.17 albertel 164: <source>doc/loncapafiles/chkconfig.piml</source>
165: <target dist='default'>chkconfig.piml</target>
166: <categoryname>system file</categoryname>
167: <description>
1.24 ! raeburn 168: Checks that the webserver and loncontrol are properly set to run at startup
! 169: </description>
! 170: <note>
! 171: </note>
! 172: </file>
! 173: <file>
! 174: <source>doc/loncapafiles/sysv-rc-conf.piml</source>
! 175: <target dist='default'>sysv-rc-conf.piml</target>
! 176: <categoryname>system file</categoryname>
! 177: <description>
! 178: Checks that the webserver and loncontrol are properly set to run at startup
! 179: </description>
! 180: <note>
! 181: </note>
! 182: </file>
! 183: <file>
! 184: <source>doc/loncapafiles/chkconfig.piml</source>
! 185: <target dist='default'>chkconfig.piml</target>
! 186: <categoryname>system file</categoryname>
! 187: <description>
! 188: Checks that the webserver and loncontrol are properly set to run at startup
1.17 albertel 189: </description>
190: <note>
191: </note>
192: </file>
193: <file>
194: <source>doc/loncapafiles/html_parser_check.piml</source>
195: <target dist='default'>html_parser_check.piml</target>
196: <categoryname>system file</categoryname>
197: <description>
198: Checks that the HTML::parser installation has the needed patches.
199: </description>
200: <note>
201: </note>
202: </file>
203: <file>
1.20 albertel 204: <source>doc/loncapafiles/math_random_check.piml</source>
205: <target dist='default'>math_random_check.piml</target>
206: <categoryname>system file</categoryname>
207: <description>
208: Checks that the Math::Random installation has the correct phrase to
209: seed generator.
210: </description>
211: <note>
212: </note>
213: </file>
214: <file>
1.17 albertel 215: <source>doc/loncapafiles/logcleanup.piml</source>
216: <target dist='default'>logcleanup.piml</target>
217: <categoryname>system file</categoryname>
218: <description>
219: Cleans the .perm logs, removing useless spam messages
220: </description>
221: <note>
222: </note>
223: </file>
224: <file>
1.8 matthew 225: <source>doc/loncapafiles/accesscount_seed.piml</source>
226: <target dist='default'>accesscount_seed.piml</target>
227: <categoryname>system file</categoryname>
228: <description>
229: Executes seed_accesscount.pl on each nohist_resevaldata.db file to move access
230: count data to nohist_accesscount.db and compact the nohist_resevaldata.db
231: file.
1.1 harris41 232: </description>
233: <note>
234: </note>
235: </file>
236: <file>
1.4 albertel 237: <source>doc/loncapafiles/clearoutoldspreadsheetcache.piml</source>
238: <target dist='default'>clearoutoldspreadsheetcache.piml</target>
239: <categoryname>system file</categoryname>
240: <description>
241: Deletes all of the old spreadsheet cache files, the ones generated prior
242: to version 0.6 were incorrect
243: </description>
244: <note>
245: </note>
246: </file>
247: <file>
1.1 harris41 248: <source>doc/loncapafiles/sanitycheck.piml</source>
249: <target dist='default'>sanitycheck.piml</target>
1.2 harris41 250: <categoryname>system file</categoryname>
251: <description>
252: Checks LON-CAPA system for frequently occuring bugs.
1.10 matthew 253: </description>
254: <note>
255: </note>
256: </file>
257: <file>
1.12 albertel 258: <source>doc/loncapafiles/cron_lpmlcheck.piml</source>
259: <target dist='default'>cron_lpmlcheck.piml</target>
260: <categoryname>system file</categoryname>
261: <description>
262: Checks that there is no lpmlsave file in the cron.d dir
263: </description>
264: </file>
265: <file>
1.10 matthew 266: <source>doc/loncapafiles/ntpcheck.piml</source>
267: <target dist='default'>ntpcheck.piml</target>
268: <categoryname>system file</categoryname>
269: <description>
270: Checks server to determine status of ntpd.
1.11 matthew 271: </description>
272: <note>
273: </note>
274: </file>
275: <file>
276: <source>doc/loncapafiles/rpmcheck.piml</source>
277: <target dist='default'>rpmcheck.piml</target>
278: <categoryname>system file</categoryname>
279: <description>
280: Checks server for rpms known to conflict with LON-CAPA.
1.2 harris41 281: </description>
282: <note>
283: </note>
284: </file>
285: <file>
286: <source>doc/loncapafiles/updatequery.piml</source>
287: <target dist='default'>updatequery.piml</target>
1.1 harris41 288: <categoryname>system file</categoryname>
289: <description>
290: Checks LON-CAPA system for frequently occuring bugs.
1.4 albertel 291: </description>
292: <note>
293: </note>
294: </file>
295: <file>
296: <source>doc/loncapafiles/sendmail_fix.piml</source>
297: <target dist='default'>sendmail_fix.piml</target>
298: <categoryname>system file</categoryname>
299: <description>
300: Checks LON-CAPA system for sendmail permissions error.
1.9 www 301: </description>
302: <note>
303: </note>
304: </file>
305: <file>
306: <source>doc/loncapafiles/ownership_fix.piml</source>
307: <target dist='default'>ownership_fix.piml</target>
308: <categoryname>system file</categoryname>
309: <description>
310: Makes sure that /home/httpd/lonUsers and /home/httpd/html are owned by www.
1.1 harris41 311: </description>
312: <note>
313: </note>
314: </file>
315: <file>
1.13 albertel 316: <source>doc/loncapafiles/run_searchcat.piml</source>
317: <target dist='default'>run_searchcat.piml</target>
318: <categoryname>system file</categoryname>
319: <description>
320: Makes sure that /home/httpd/lonUsers and /home/httpd/html are owned by www.
321: </description>
322: <note>
323: </note>
324: </file>
325: <file>
1.18 albertel 326: <source>doc/loncapafiles/update_queue_slots.piml</source>
327: <target dist='default'>update_queue_slots.piml</target>
328: <categoryname>system file</categoryname>
329: <description>
330: Update the slots definitons from havin @ to having :
331: </description>
332: <note>
333: </note>
334: </file>
335: <file>
1.16 albertel 336: <source>doc/loncapafiles/wrap_setuid.piml</source>
337: <target dist='default'>wrap_setuid.piml</target>
338: <categoryname>system file</categoryname>
339: <description>
340: Wraps the setuid perl scripts into a binary excutable wrapper.
341: </description>
342: <note>
343: </note>
344: </file>
345: <file>
1.21 raeburn 346: <source>doc/loncapafiles/latex_fixup.piml</source>
347: <target dist='default'>latex_fixup.piml</target>
348: <categoryname>system file</categoryname>
349: <description>
350: Runs /usr/bin/mktexlsr so LaTeX sees files added to texmf/tex/latex/base
351: </description>
352: <note>
353: </note>
354: </file>
355: <file>
1.22 raeburn 356: <source>doc/loncapafiles/picins_check.piml</source>
357: <target dist='default'>picins_check.piml</target>
358: <categoryname>system file</categoryname>
359: <description>
360: If picins.sty is absent, retrieves from CTAN and runs texinfo rehash
361: and fmtutil-sys --missing.
362: </description>
363: <note>
364: </note>
365: </file>
366: <file>
1.23 raeburn 367: <source>doc/loncapafiles/mimetex_version_check.piml</source>
368: <target dist='default'>mimetex_version_check.piml</target>
369: <categoryname>system file</categoryname>
370: <description>
371: If mimeTeX cgi has been updated will update version number in
372: /home/httpd/lonTabs/mimetex-version and remove any .gif files from
373: /home/httpd/cgi-bin/mimtexcache/
374: </description>
375: <note>
376: </note>
377: </file>
378: <file>
1.1 harris41 379: <source>doc/loncapafiles/valid_hosts.xfml</source>
380: <target dist='default'>valid_hosts.xfml</target>
381: <categoryname>system file</categoryname>
382: <description>
383: Useful for extracting (and pushing/pulling) information relevant
384: to hosts.tab.
385: </description>
386: <note>
387: </note>
388: </file>
389: <file>
390: <source>loncom/build/check-rpms</source>
391: <target dist='default'>check-rpms</target>
392: <categoryname>system file</categoryname>
393: <description>
394: script for checking RPMS against an RPM repository
395: </description>
396: <note>
397: </note>
398: </file>
399: <file>
400: <source>loncom/build/distprobe</source>
401: <target dist='default'>distprobe</target>
402: <categoryname>system file</categoryname>
403: <description>
404: for probing operating system flavor and version
405: </description>
406: <note>
407: </note>
408: </file>
409: <file>
410: <source>loncom/build/doc_template.pl</source>
411: <target dist='default'>doc_template.pl</target>
412: <categoryname>system file</categoryname>
413: <description>
414: for making fancy install.lon-capa.org pages
415: </description>
416: <note>
417: </note>
418: </file>
419: <file>
420: <source>loncom/build/filecompare.pl</source>
421: <target dist='default'>filecompare.pl</target>
422: <categoryname>system file</categoryname>
423: <description>
424: rigorously compare many different values associated between files
425: </description>
426: <note>
427: </note>
428: </file>
429: <file>
430: <source>loncom/build/loncaparestoreconfigurations</source>
431: <target dist='default'>loncaparestoreconfigurations</target>
432: <categoryname>system file</categoryname>
433: <description>
434: intelligently restore configuration values
435: </description>
436: <note>
437: </note>
438: </file>
439: <file>
440: <source>loncom/build/lpml.dtd</source>
441: <target dist='default'>lpml.dtd</target>
442: <categoryname>system file</categoryname>
443: <description>
444: DocumentType for LPML
445: </description>
446: <note>
447: </note>
448: </file>
449: <file>
450: <source>loncom/build/lpml_html_posteval.pl</source>
451: <target dist='default'>lpml_html_posteval.pl</target>
452: <categoryname>system file</categoryname>
453: <description>
454: </description>
455: <note>
456: </note>
457: </file>
458: <file>
459: <source>loncom/build/lpml_parse.pl</source>
460: <target dist='default'>lpml_parse.pl</target>
461: <categoryname>system file</categoryname>
462: <description>
463: parse apart the loncapafiles.lpml and buildfiles.lpml
464: </description>
465: <note>
466: </note>
467: </file>
468: <file>
469: <source>loncom/build/make_domain_coordinator.pl</source>
470: <target dist='default'>make_domain_coordinator.pl</target>
471: <categoryname>system file</categoryname>
472: <description>
473: make a domain coordinator on a new LON-CAPA system
474: </description>
475: <note>
476: </note>
477: </file>
478: <file>
1.19 albertel 479: <source>loncom/build/add_domain_coordinator_privilege.pl</source>
480: <target dist='default'>add_domain_coordinator_privilege.pl</target>
481: <categoryname>system file</categoryname>
482: <description>
483: add domain coordinator privilege to and exisiting local LON-CAPA user
484: </description>
485: <note>
486: </note>
487: </file>
488: <file>
1.1 harris41 489: <source>loncom/build/piml.dtd</source>
490: <target dist='default'>piml.dtd</target>
491: <categoryname>system file</categoryname>
492: <description>
493: DocumentType definition for PIML (part of the LPML system)
494: </description>
495: <note>
496: </note>
497: </file>
498: <file>
499: <source>loncom/build/piml_parse.pl</source>
500: <target dist='default'>piml_parse.pl</target>
501: <categoryname>system file</categoryname>
502: <description>
503: parse a PIML file
504: </description>
505: <note>
506: </note>
507: </file>
508: <file>
509: <source>loncom/build/pod2html.sh</source>
510: <target dist='default'>pod2html.sh</target>
511: <categoryname>system file</categoryname>
512: <description>
513: make HTML documentation pages
514: </description>
515: <note>
516: </note>
517: </file>
518: <file>
519: <source>loncom/build/pod2man.sh</source>
520: <target dist='default'>pod2man.sh</target>
521: <categoryname>system file</categoryname>
522: <description>
523: make UNIX-style manual pages
524: </description>
525: <note>
526: </note>
527: </file>
528: <file>
529: <source>loncom/build/verify.pl</source>
530: <target dist='default'>verify.pl</target>
531: <categoryname>system file</categoryname>
532: <description>
533: wraps around filecompare.pl for posteval LPML statements
534: </description>
535: <note>
536: </note>
537: </file>
538: <file>
539: <source>loncom/build/verifymodown.pl</source>
540: <target dist='default'>verifymodown.pl</target>
541: <categoryname>system file</categoryname>
542: <description>
543: double-checks modification and ownership on files
544: </description>
545: <note>
546: </note>
547: </file>
548: <file>
549: <source>loncom/build/xfml.dtd</source>
550: <target dist='default'>xfml.dtd</target>
551: <categoryname>system file</categoryname>
552: <description>
553: DocumentType definition for XFML (part of the LPML system)
554: </description>
555: <note>
556: </note>
557: </file>
558: <file>
559: <source>loncom/build/xfml_parse.pl</source>
560: <target dist='default'>xfml_parse.pl</target>
561: <categoryname>system file</categoryname>
562: <description>
563: parses XFML files
564: </description>
565: <note>
566: </note>
567: </file>
568: </files>
569: </lpml>
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/back.gif){kind=icon}
Return to buildfiles.lpml CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [LON-CAPA] / doc / loncapafiles