[BACK]Return to buildfiles.lpml CVS log [TXT] [DIR] Up to [LON-CAPA] / doc / loncapafiles
File:  [LON-CAPA] / doc / loncapafiles / buildfiles.lpml
Revision 1.24: download - view: text, annotated - select for diffs
Sun Jul 12 15:34:21 2009 UTC (14 years, 9 months ago) by raeburn
Branches: MAIN
CVS tags: HEAD
Use sysv-rc-conf instead of chkconfig to set webserver and loncontrol to start up on
reboot.

    1: <!DOCTYPE lpml PUBLIC "-//TUX/DTD lpml 1.0 Final//EN"
    2:  "http://lpml.sourceforge.net/DTD/lpml.dtd">
    3: <!-- buildfiles.lpml -->
    4: 
    5: <!-- $Id: buildfiles.lpml,v 1.24 2009/07/12 15:34:21 raeburn Exp $ -->
    6: 
    7: <!--
    8: 
    9: Copyright Michigan State University Board of Trustees
   10: 
   11: This file is part of the LearningOnline Network with CAPA (LON-CAPA).
   12: 
   13: LON-CAPA is free software; you can redistribute it and/or modify
   14: it under the terms of the GNU General Public License as published by
   15: the Free Software Foundation; either version 2 of the License, or
   16: (at your option) any later version.
   17: 
   18: LON-CAPA is distributed in the hope that it will be useful,
   19: but WITHOUT ANY WARRANTY; without even the implied warranty of
   20: MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   21: GNU General Public License for more details.
   22: 
   23: You should have received a copy of the GNU General Public License
   24: along with LON-CAPA; if not, write to the Free Software
   25: Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
   26: 
   27: /home/httpd/html/adm/gpl.txt
   28: 
   29: http://www.lon-capa.org/
   30: 
   31: -->
   32: 
   33: <!-- Default values must be defined before specific values. -->
   34: <!-- If no 'dist' attribute is specified, then it is always installed. -->
   35: <!-- If 'dist' attribute is set to  'default', then the specification. -->
   36: <!-- is accepted if an alternative distribution is not requested or not -->
   37: <!-- defined. -->
   38: 
   39: <lpml>
   40: <specialnotices>
   41: <specialnotice dist='default'>
   42: </specialnotice>
   43: </specialnotices>
   44: <targetroot>/build</targetroot>
   45: <sourceroot>/home/user/loncapa/</sourceroot>
   46: <categories>
   47: <category name="system file" type="runtime">
   48:   <chmod dist='default'>0644</chmod><chown dist='default'>root:root</chown>
   49:   <abbreviation>systemfile</abbreviation>
   50: </category>
   51: <category name="system file" type="development">
   52:   <chmod dist='default'>0644</chmod><chown dist='default'>root:root</chown>
   53:   <abbreviation>systemfile</abbreviation>
   54: </category>
   55: <category name="standard" type="runtime">
   56:   <chmod dist='default'>0755</chmod><chown dist='default'>root:root</chown>
   57:   <abbreviation>directory</abbreviation>
   58: </category>
   59: <category name="standard" type="development">
   60:   <chmod dist='default'>0755</chmod><chown dist='default'>root:root</chown>
   61:   <abbreviation>directory</abbreviation>
   62: </category>
   63: </categories>
   64: <directories>
   65: </directories>
   66: <files>
   67: <file>
   68: <source>loncom/build/Makefile</source>
   69: <target dist='default'>Makefile</target>
   70: <categoryname>system file</categoryname>
   71: <description>
   72: Makefile for LON-CAPA
   73: </description>
   74: <note>
   75: </note>
   76: <dependencies>
   77: doc/loncapafiles/configurable.gif;
   78: doc/loncapafiles/directory.gif;
   79: doc/loncapafiles/emptydirectory.gif;
   80: doc/loncapafiles/graphicfile.gif;
   81: doc/loncapafiles/handler.gif;
   82: doc/loncapafiles/interfacefile.gif;
   83: doc/loncapafiles/link.gif;
   84: doc/loncapafiles/rootscript.gif;
   85: doc/loncapafiles/script.gif;
   86: doc/loncapafiles/setuid.gif;
   87: doc/loncapafiles/static.gif;
   88: doc/loncapafiles/systemfile.gif
   89: </dependencies>
   90: </file>
   91: <file>
   92: <source>doc/loncapafiles/loncapafiles.lpml</source>
   93: <target dist='default'>loncapafiles.lpml</target>
   94: <categoryname>system file</categoryname>
   95: <description>
   96: Describes the files that implement LON-CAPA on the filesystem
   97: </description>
   98: <note>
   99: </note>
  100: </file>
  101: <file>
  102: <source>doc/loncapafiles/buildfiles.lpml</source>
  103: <target dist='default'>buildfiles.lpml</target>
  104: <categoryname>system file</categoryname>
  105: <description>
  106: Describes the files that implement the building of LON-CAPA inside the source
  107: file tree.
  108: </description>
  109: <note>
  110: </note>
  111: </file>
  112: <file>
  113: <source>doc/loncapafiles/installfiles.lpml</source>
  114: <target dist='default'>installfiles.lpml</target>
  115: <categoryname>system file</categoryname>
  116: <description>
  117: Describes the files that help automate LON-CAPA installations on specific
  118: operating systems.
  119: </description>
  120: <note>
  121: </note>
  122: </file>
  123: <file>
  124: <source>doc/loncapafiles/modify_config_files.piml</source>
  125: <target dist='default'>modify_config_files.piml</target>
  126: <categoryname>system file</categoryname>
  127: <description>
  128: Post-installation of MySQL and yum config files
  129: </description>
  130: <note>
  131: </note>
  132: </file>
  133: <file>
  134: <source>doc/loncapafiles/webserver.piml</source>
  135: <target dist='default'>webserver.piml</target>
  136: <categoryname>system file</categoryname>
  137: <description>
  138: Post-installation of web server configuration files
  139: </description>
  140: <note>
  141: </note>
  142: </file>
  143: <file>
  144: <source>doc/loncapafiles/reseval_fixup.piml</source>
  145: <target dist='default'>reseval_fixup.piml</target>
  146: <categoryname>system file</categoryname>
  147: <description>
  148: Migrates reseval.db to nohist_eseval.db, deletes useless hist file
  149: </description>
  150: <note>
  151: </note>
  152: </file>
  153: <file>
  154:   <source>doc/loncapafiles/clean_file_permissions.piml</source>
  155:   <target dist='default'>clean_file_permissions.piml</target>
  156:   <categoryname>system file</categoryname>
  157:   <description>
  158: Executes clean_db.pl on each file_permisions.db file to remove erroneuos keys.
  159:   </description>
  160:   <note>
  161:   </note>
  162: </file>
  163: <file>
  164:   <source>doc/loncapafiles/chkconfig.piml</source>
  165:   <target dist='default'>chkconfig.piml</target>
  166:   <categoryname>system file</categoryname>
  167:   <description>
  168: Checks that the webserver and loncontrol are properly set to run at startup
  169:   </description>
  170:   <note>
  171:   </note>
  172: </file>
  173: <file>
  174:   <source>doc/loncapafiles/sysv-rc-conf.piml</source>
  175:   <target dist='default'>sysv-rc-conf.piml</target>
  176:   <categoryname>system file</categoryname>
  177:   <description>
  178: Checks that the webserver and loncontrol are properly set to run at startup
  179:   </description>
  180:   <note>
  181:   </note>
  182: </file>
  183: <file>
  184:   <source>doc/loncapafiles/chkconfig.piml</source>
  185:   <target dist='default'>chkconfig.piml</target>
  186:   <categoryname>system file</categoryname>
  187:   <description>
  188: Checks that the webserver and loncontrol are properly set to run at startup
  189:   </description>
  190:   <note>
  191:   </note>
  192: </file>
  193: <file>
  194:   <source>doc/loncapafiles/html_parser_check.piml</source>
  195:   <target dist='default'>html_parser_check.piml</target>
  196:   <categoryname>system file</categoryname>
  197:   <description>
  198: Checks that the HTML::parser installation has the needed patches.
  199:   </description>
  200:   <note>
  201:   </note>
  202: </file>
  203: <file>
  204:   <source>doc/loncapafiles/math_random_check.piml</source>
  205:   <target dist='default'>math_random_check.piml</target>
  206:   <categoryname>system file</categoryname>
  207:   <description>
  208: Checks that the Math::Random installation has the correct phrase to 
  209: seed generator.
  210:   </description>
  211:   <note>
  212:   </note>
  213: </file>
  214: <file>
  215:   <source>doc/loncapafiles/logcleanup.piml</source>
  216:   <target dist='default'>logcleanup.piml</target>
  217:   <categoryname>system file</categoryname>
  218:   <description>
  219: Cleans the .perm logs, removing useless spam messages
  220:   </description>
  221:   <note>
  222:   </note>
  223: </file>
  224: <file>
  225: <source>doc/loncapafiles/accesscount_seed.piml</source>
  226: <target dist='default'>accesscount_seed.piml</target>
  227: <categoryname>system file</categoryname>
  228: <description>
  229: Executes seed_accesscount.pl on each nohist_resevaldata.db file to move access
  230: count data to nohist_accesscount.db and compact the nohist_resevaldata.db
  231: file.
  232: </description>
  233: <note>
  234: </note>
  235: </file>
  236: <file>
  237: <source>doc/loncapafiles/clearoutoldspreadsheetcache.piml</source>
  238: <target dist='default'>clearoutoldspreadsheetcache.piml</target>
  239: <categoryname>system file</categoryname>
  240: <description>
  241: Deletes all of the old spreadsheet cache files, the ones generated prior 
  242: to version 0.6 were incorrect
  243: </description>
  244: <note>
  245: </note>
  246: </file>
  247: <file>
  248: <source>doc/loncapafiles/sanitycheck.piml</source>
  249: <target dist='default'>sanitycheck.piml</target>
  250: <categoryname>system file</categoryname>
  251: <description>
  252: Checks LON-CAPA system for frequently occuring bugs.
  253: </description>
  254: <note>
  255: </note>
  256: </file>
  257: <file>
  258:   <source>doc/loncapafiles/cron_lpmlcheck.piml</source>
  259:   <target dist='default'>cron_lpmlcheck.piml</target>
  260:   <categoryname>system file</categoryname>
  261:   <description>
  262:     Checks that there is no lpmlsave file in the cron.d dir
  263:   </description>
  264: </file>
  265: <file>
  266: <source>doc/loncapafiles/ntpcheck.piml</source>
  267: <target dist='default'>ntpcheck.piml</target>
  268: <categoryname>system file</categoryname>
  269: <description>
  270: Checks server to determine status of ntpd.
  271: </description>
  272: <note>
  273: </note>
  274: </file>
  275: <file>
  276: <source>doc/loncapafiles/rpmcheck.piml</source>
  277: <target dist='default'>rpmcheck.piml</target>
  278: <categoryname>system file</categoryname>
  279: <description>
  280: Checks server for rpms known to conflict with LON-CAPA.
  281: </description>
  282: <note>
  283: </note>
  284: </file>
  285: <file>
  286: <source>doc/loncapafiles/updatequery.piml</source>
  287: <target dist='default'>updatequery.piml</target>
  288: <categoryname>system file</categoryname>
  289: <description>
  290: Checks LON-CAPA system for frequently occuring bugs.
  291: </description>
  292: <note>
  293: </note>
  294: </file>
  295: <file>
  296: <source>doc/loncapafiles/sendmail_fix.piml</source>
  297: <target dist='default'>sendmail_fix.piml</target>
  298: <categoryname>system file</categoryname>
  299: <description>
  300: Checks LON-CAPA system for sendmail permissions error.
  301: </description>
  302: <note>
  303: </note>
  304: </file>
  305: <file>
  306: <source>doc/loncapafiles/ownership_fix.piml</source>
  307: <target dist='default'>ownership_fix.piml</target>
  308: <categoryname>system file</categoryname>
  309: <description>
  310: Makes sure that /home/httpd/lonUsers and /home/httpd/html are owned by www.
  311: </description>
  312: <note>
  313: </note>
  314: </file>
  315: <file>
  316: <source>doc/loncapafiles/run_searchcat.piml</source>
  317: <target dist='default'>run_searchcat.piml</target>
  318: <categoryname>system file</categoryname>
  319: <description>
  320: Makes sure that /home/httpd/lonUsers and /home/httpd/html are owned by www.
  321: </description>
  322: <note>
  323: </note>
  324: </file>
  325: <file>
  326:   <source>doc/loncapafiles/update_queue_slots.piml</source>
  327:   <target dist='default'>update_queue_slots.piml</target>
  328:   <categoryname>system file</categoryname>
  329:   <description>
  330: Update the slots definitons from havin @ to having :
  331:   </description>
  332:   <note>
  333:   </note>
  334: </file>
  335: <file>
  336:   <source>doc/loncapafiles/wrap_setuid.piml</source>
  337:   <target dist='default'>wrap_setuid.piml</target>
  338:   <categoryname>system file</categoryname>
  339:   <description>
  340: Wraps the setuid perl scripts into a binary excutable wrapper.
  341:   </description>
  342:   <note>
  343:   </note>
  344: </file>
  345: <file>
  346:   <source>doc/loncapafiles/latex_fixup.piml</source>
  347:   <target dist='default'>latex_fixup.piml</target>
  348:   <categoryname>system file</categoryname>
  349:   <description>
  350: Runs /usr/bin/mktexlsr so LaTeX sees files added to texmf/tex/latex/base
  351:   </description>
  352:   <note>
  353:   </note>
  354: </file>
  355: <file>
  356:   <source>doc/loncapafiles/picins_check.piml</source>
  357:   <target dist='default'>picins_check.piml</target>
  358:   <categoryname>system file</categoryname>
  359:   <description>
  360: If picins.sty is absent, retrieves from CTAN and runs texinfo rehash 
  361: and fmtutil-sys --missing.
  362:   </description>
  363:   <note>
  364:   </note>
  365: </file>
  366: <file>
  367:   <source>doc/loncapafiles/mimetex_version_check.piml</source>
  368:   <target dist='default'>mimetex_version_check.piml</target>
  369:   <categoryname>system file</categoryname>
  370:   <description>
  371: If mimeTeX cgi has been updated will update version number in 
  372: /home/httpd/lonTabs/mimetex-version and remove any .gif files from 
  373: /home/httpd/cgi-bin/mimtexcache/
  374:   </description>
  375:   <note>
  376:   </note>
  377: </file>
  378: <file>
  379: <source>doc/loncapafiles/valid_hosts.xfml</source>
  380: <target dist='default'>valid_hosts.xfml</target>
  381: <categoryname>system file</categoryname>
  382: <description>
  383: Useful for extracting (and pushing/pulling) information relevant
  384: to hosts.tab.
  385: </description>
  386: <note>
  387: </note>
  388: </file>
  389: <file>
  390: <source>loncom/build/check-rpms</source>
  391: <target dist='default'>check-rpms</target>
  392: <categoryname>system file</categoryname>
  393: <description>
  394: script for checking RPMS against an RPM repository
  395: </description>
  396: <note>
  397: </note>
  398: </file>
  399: <file>
  400: <source>loncom/build/distprobe</source>
  401: <target dist='default'>distprobe</target>
  402: <categoryname>system file</categoryname>
  403: <description>
  404: for probing operating system flavor and version
  405: </description>
  406: <note>
  407: </note>
  408: </file>
  409: <file>
  410: <source>loncom/build/doc_template.pl</source>
  411: <target dist='default'>doc_template.pl</target>
  412: <categoryname>system file</categoryname>
  413: <description>
  414: for making fancy install.lon-capa.org pages
  415: </description>
  416: <note>
  417: </note>
  418: </file>
  419: <file>
  420: <source>loncom/build/filecompare.pl</source>
  421: <target dist='default'>filecompare.pl</target>
  422: <categoryname>system file</categoryname>
  423: <description>
  424: rigorously compare many different values associated between files
  425: </description>
  426: <note>
  427: </note>
  428: </file>
  429: <file>
  430: <source>loncom/build/loncaparestoreconfigurations</source>
  431: <target dist='default'>loncaparestoreconfigurations</target>
  432: <categoryname>system file</categoryname>
  433: <description>
  434: intelligently restore configuration values
  435: </description>
  436: <note>
  437: </note>
  438: </file>
  439: <file>
  440: <source>loncom/build/lpml.dtd</source>
  441: <target dist='default'>lpml.dtd</target>
  442: <categoryname>system file</categoryname>
  443: <description>
  444: DocumentType for LPML
  445: </description>
  446: <note>
  447: </note>
  448: </file>
  449: <file>
  450: <source>loncom/build/lpml_html_posteval.pl</source>
  451: <target dist='default'>lpml_html_posteval.pl</target>
  452: <categoryname>system file</categoryname>
  453: <description>
  454: </description>
  455: <note>
  456: </note>
  457: </file>
  458: <file>
  459: <source>loncom/build/lpml_parse.pl</source>
  460: <target dist='default'>lpml_parse.pl</target>
  461: <categoryname>system file</categoryname>
  462: <description>
  463: parse apart the loncapafiles.lpml and buildfiles.lpml
  464: </description>
  465: <note>
  466: </note>
  467: </file>
  468: <file>
  469: <source>loncom/build/make_domain_coordinator.pl</source>
  470: <target dist='default'>make_domain_coordinator.pl</target>
  471: <categoryname>system file</categoryname>
  472: <description>
  473: make a domain coordinator on a new LON-CAPA system
  474: </description>
  475: <note>
  476: </note>
  477: </file>
  478: <file>
  479:   <source>loncom/build/add_domain_coordinator_privilege.pl</source>
  480:   <target dist='default'>add_domain_coordinator_privilege.pl</target>
  481:   <categoryname>system file</categoryname>
  482:   <description>
  483: add domain coordinator privilege to and exisiting local LON-CAPA user
  484:   </description>
  485:   <note>
  486:   </note>
  487: </file>
  488: <file>
  489: <source>loncom/build/piml.dtd</source>
  490: <target dist='default'>piml.dtd</target>
  491: <categoryname>system file</categoryname>
  492: <description>
  493: DocumentType definition for PIML (part of the LPML system)
  494: </description>
  495: <note>
  496: </note>
  497: </file>
  498: <file>
  499: <source>loncom/build/piml_parse.pl</source>
  500: <target dist='default'>piml_parse.pl</target>
  501: <categoryname>system file</categoryname>
  502: <description>
  503: parse a PIML file
  504: </description>
  505: <note>
  506: </note>
  507: </file>
  508: <file>
  509: <source>loncom/build/pod2html.sh</source>
  510: <target dist='default'>pod2html.sh</target>
  511: <categoryname>system file</categoryname>
  512: <description>
  513: make HTML documentation pages
  514: </description>
  515: <note>
  516: </note>
  517: </file>
  518: <file>
  519: <source>loncom/build/pod2man.sh</source>
  520: <target dist='default'>pod2man.sh</target>
  521: <categoryname>system file</categoryname>
  522: <description>
  523: make UNIX-style manual pages
  524: </description>
  525: <note>
  526: </note>
  527: </file>
  528: <file>
  529: <source>loncom/build/verify.pl</source>
  530: <target dist='default'>verify.pl</target>
  531: <categoryname>system file</categoryname>
  532: <description>
  533: wraps around filecompare.pl for posteval LPML statements
  534: </description>
  535: <note>
  536: </note>
  537: </file>
  538: <file>
  539: <source>loncom/build/verifymodown.pl</source>
  540: <target dist='default'>verifymodown.pl</target>
  541: <categoryname>system file</categoryname>
  542: <description>
  543: double-checks modification and ownership on files
  544: </description>
  545: <note>
  546: </note>
  547: </file>
  548: <file>
  549: <source>loncom/build/xfml.dtd</source>
  550: <target dist='default'>xfml.dtd</target>
  551: <categoryname>system file</categoryname>
  552: <description>
  553: DocumentType definition for XFML (part of the LPML system)
  554: </description>
  555: <note>
  556: </note>
  557: </file>
  558: <file>
  559: <source>loncom/build/xfml_parse.pl</source>
  560: <target dist='default'>xfml_parse.pl</target>
  561: <categoryname>system file</categoryname>
  562: <description>
  563: parses XFML files
  564: </description>
  565: <note>
  566: </note>
  567: </file>
  568: </files>
  569: </lpml>
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>