Return to buildfiles.lpml CVS log

Up to [LON-CAPA] / doc / loncapafiles

- sysv-rc-conf.piml no longer used (functionality merged into chkconfig.piml).
- remove duplicate entry for chkconfig.piml

    1: <!DOCTYPE lpml PUBLIC "-//TUX/DTD lpml 1.0 Final//EN"
    2:  "http://lpml.sourceforge.net/DTD/lpml.dtd">
    3: <!-- buildfiles.lpml -->
    4: 
    5: <!-- $Id: buildfiles.lpml,v 1.25 2009/07/14 12:38:02 raeburn Exp $ -->
    6: 
    7: <!--
    8: 
    9: Copyright Michigan State University Board of Trustees
   10: 
   11: This file is part of the LearningOnline Network with CAPA (LON-CAPA).
   12: 
   13: LON-CAPA is free software; you can redistribute it and/or modify
   14: it under the terms of the GNU General Public License as published by
   15: the Free Software Foundation; either version 2 of the License, or
   16: (at your option) any later version.
   17: 
   18: LON-CAPA is distributed in the hope that it will be useful,
   19: but WITHOUT ANY WARRANTY; without even the implied warranty of
   20: MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   21: GNU General Public License for more details.
   22: 
   23: You should have received a copy of the GNU General Public License
   24: along with LON-CAPA; if not, write to the Free Software
   25: Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
   26: 
   27: /home/httpd/html/adm/gpl.txt
   28: 
   29: http://www.lon-capa.org/
   30: 
   31: -->
   32: 
   33: <!-- Default values must be defined before specific values. -->
   34: <!-- If no 'dist' attribute is specified, then it is always installed. -->
   35: <!-- If 'dist' attribute is set to  'default', then the specification. -->
   36: <!-- is accepted if an alternative distribution is not requested or not -->
   37: <!-- defined. -->
   38: 
   39: <lpml>
   40: <specialnotices>
   41: <specialnotice dist='default'>
   42: </specialnotice>
   43: </specialnotices>
   44: <targetroot>/build</targetroot>
   45: <sourceroot>/home/user/loncapa/</sourceroot>
   46: <categories>
   47: <category name="system file" type="runtime">
   48:   <chmod dist='default'>0644</chmod><chown dist='default'>root:root</chown>
   49:   <abbreviation>systemfile</abbreviation>
   50: </category>
   51: <category name="system file" type="development">
   52:   <chmod dist='default'>0644</chmod><chown dist='default'>root:root</chown>
   53:   <abbreviation>systemfile</abbreviation>
   54: </category>
   55: <category name="standard" type="runtime">
   56:   <chmod dist='default'>0755</chmod><chown dist='default'>root:root</chown>
   57:   <abbreviation>directory</abbreviation>
   58: </category>
   59: <category name="standard" type="development">
   60:   <chmod dist='default'>0755</chmod><chown dist='default'>root:root</chown>
   61:   <abbreviation>directory</abbreviation>
   62: </category>
   63: </categories>
   64: <directories>
   65: </directories>
   66: <files>
   67: <file>
   68: <source>loncom/build/Makefile</source>
   69: <target dist='default'>Makefile</target>
   70: <categoryname>system file</categoryname>
   71: <description>
   72: Makefile for LON-CAPA
   73: </description>
   74: <note>
   75: </note>
   76: <dependencies>
   77: doc/loncapafiles/configurable.gif;
   78: doc/loncapafiles/directory.gif;
   79: doc/loncapafiles/emptydirectory.gif;
   80: doc/loncapafiles/graphicfile.gif;
   81: doc/loncapafiles/handler.gif;
   82: doc/loncapafiles/interfacefile.gif;
   83: doc/loncapafiles/link.gif;
   84: doc/loncapafiles/rootscript.gif;
   85: doc/loncapafiles/script.gif;
   86: doc/loncapafiles/setuid.gif;
   87: doc/loncapafiles/static.gif;
   88: doc/loncapafiles/systemfile.gif
   89: </dependencies>
   90: </file>
   91: <file>
   92: <source>doc/loncapafiles/loncapafiles.lpml</source>
   93: <target dist='default'>loncapafiles.lpml</target>
   94: <categoryname>system file</categoryname>
   95: <description>
   96: Describes the files that implement LON-CAPA on the filesystem
   97: </description>
   98: <note>
   99: </note>
  100: </file>
  101: <file>
  102: <source>doc/loncapafiles/buildfiles.lpml</source>
  103: <target dist='default'>buildfiles.lpml</target>
  104: <categoryname>system file</categoryname>
  105: <description>
  106: Describes the files that implement the building of LON-CAPA inside the source
  107: file tree.
  108: </description>
  109: <note>
  110: </note>
  111: </file>
  112: <file>
  113: <source>doc/loncapafiles/installfiles.lpml</source>
  114: <target dist='default'>installfiles.lpml</target>
  115: <categoryname>system file</categoryname>
  116: <description>
  117: Describes the files that help automate LON-CAPA installations on specific
  118: operating systems.
  119: </description>
  120: <note>
  121: </note>
  122: </file>
  123: <file>
  124: <source>doc/loncapafiles/modify_config_files.piml</source>
  125: <target dist='default'>modify_config_files.piml</target>
  126: <categoryname>system file</categoryname>
  127: <description>
  128: Post-installation of MySQL and yum config files
  129: </description>
  130: <note>
  131: </note>
  132: </file>
  133: <file>
  134: <source>doc/loncapafiles/webserver.piml</source>
  135: <target dist='default'>webserver.piml</target>
  136: <categoryname>system file</categoryname>
  137: <description>
  138: Post-installation of web server configuration files
  139: </description>
  140: <note>
  141: </note>
  142: </file>
  143: <file>
  144: <source>doc/loncapafiles/reseval_fixup.piml</source>
  145: <target dist='default'>reseval_fixup.piml</target>
  146: <categoryname>system file</categoryname>
  147: <description>
  148: Migrates reseval.db to nohist_eseval.db, deletes useless hist file
  149: </description>
  150: <note>
  151: </note>
  152: </file>
  153: <file>
  154:   <source>doc/loncapafiles/clean_file_permissions.piml</source>
  155:   <target dist='default'>clean_file_permissions.piml</target>
  156:   <categoryname>system file</categoryname>
  157:   <description>
  158: Executes clean_db.pl on each file_permisions.db file to remove erroneuos keys.
  159:   </description>
  160:   <note>
  161:   </note>
  162: </file>
  163: <file>
  164:   <source>doc/loncapafiles/chkconfig.piml</source>
  165:   <target dist='default'>chkconfig.piml</target>
  166:   <categoryname>system file</categoryname>
  167:   <description>
  168: Checks that the webserver and loncontrol are properly set to run at startup
  169:   </description>
  170:   <note>
  171:   </note>
  172: </file>
  173: <file>
  174:   <source>doc/loncapafiles/html_parser_check.piml</source>
  175:   <target dist='default'>html_parser_check.piml</target>
  176:   <categoryname>system file</categoryname>
  177:   <description>
  178: Checks that the HTML::parser installation has the needed patches.
  179:   </description>
  180:   <note>
  181:   </note>
  182: </file>
  183: <file>
  184:   <source>doc/loncapafiles/math_random_check.piml</source>
  185:   <target dist='default'>math_random_check.piml</target>
  186:   <categoryname>system file</categoryname>
  187:   <description>
  188: Checks that the Math::Random installation has the correct phrase to 
  189: seed generator.
  190:   </description>
  191:   <note>
  192:   </note>
  193: </file>
  194: <file>
  195:   <source>doc/loncapafiles/logcleanup.piml</source>
  196:   <target dist='default'>logcleanup.piml</target>
  197:   <categoryname>system file</categoryname>
  198:   <description>
  199: Cleans the .perm logs, removing useless spam messages
  200:   </description>
  201:   <note>
  202:   </note>
  203: </file>
  204: <file>
  205: <source>doc/loncapafiles/accesscount_seed.piml</source>
  206: <target dist='default'>accesscount_seed.piml</target>
  207: <categoryname>system file</categoryname>
  208: <description>
  209: Executes seed_accesscount.pl on each nohist_resevaldata.db file to move access
  210: count data to nohist_accesscount.db and compact the nohist_resevaldata.db
  211: file.
  212: </description>
  213: <note>
  214: </note>
  215: </file>
  216: <file>
  217: <source>doc/loncapafiles/clearoutoldspreadsheetcache.piml</source>
  218: <target dist='default'>clearoutoldspreadsheetcache.piml</target>
  219: <categoryname>system file</categoryname>
  220: <description>
  221: Deletes all of the old spreadsheet cache files, the ones generated prior 
  222: to version 0.6 were incorrect
  223: </description>
  224: <note>
  225: </note>
  226: </file>
  227: <file>
  228: <source>doc/loncapafiles/sanitycheck.piml</source>
  229: <target dist='default'>sanitycheck.piml</target>
  230: <categoryname>system file</categoryname>
  231: <description>
  232: Checks LON-CAPA system for frequently occuring bugs.
  233: </description>
  234: <note>
  235: </note>
  236: </file>
  237: <file>
  238:   <source>doc/loncapafiles/cron_lpmlcheck.piml</source>
  239:   <target dist='default'>cron_lpmlcheck.piml</target>
  240:   <categoryname>system file</categoryname>
  241:   <description>
  242:     Checks that there is no lpmlsave file in the cron.d dir
  243:   </description>
  244: </file>
  245: <file>
  246: <source>doc/loncapafiles/ntpcheck.piml</source>
  247: <target dist='default'>ntpcheck.piml</target>
  248: <categoryname>system file</categoryname>
  249: <description>
  250: Checks server to determine status of ntpd.
  251: </description>
  252: <note>
  253: </note>
  254: </file>
  255: <file>
  256: <source>doc/loncapafiles/rpmcheck.piml</source>
  257: <target dist='default'>rpmcheck.piml</target>
  258: <categoryname>system file</categoryname>
  259: <description>
  260: Checks server for rpms known to conflict with LON-CAPA.
  261: </description>
  262: <note>
  263: </note>
  264: </file>
  265: <file>
  266: <source>doc/loncapafiles/updatequery.piml</source>
  267: <target dist='default'>updatequery.piml</target>
  268: <categoryname>system file</categoryname>
  269: <description>
  270: Checks LON-CAPA system for frequently occuring bugs.
  271: </description>
  272: <note>
  273: </note>
  274: </file>
  275: <file>
  276: <source>doc/loncapafiles/sendmail_fix.piml</source>
  277: <target dist='default'>sendmail_fix.piml</target>
  278: <categoryname>system file</categoryname>
  279: <description>
  280: Checks LON-CAPA system for sendmail permissions error.
  281: </description>
  282: <note>
  283: </note>
  284: </file>
  285: <file>
  286: <source>doc/loncapafiles/ownership_fix.piml</source>
  287: <target dist='default'>ownership_fix.piml</target>
  288: <categoryname>system file</categoryname>
  289: <description>
  290: Makes sure that /home/httpd/lonUsers and /home/httpd/html are owned by www.
  291: </description>
  292: <note>
  293: </note>
  294: </file>
  295: <file>
  296: <source>doc/loncapafiles/run_searchcat.piml</source>
  297: <target dist='default'>run_searchcat.piml</target>
  298: <categoryname>system file</categoryname>
  299: <description>
  300: Makes sure that /home/httpd/lonUsers and /home/httpd/html are owned by www.
  301: </description>
  302: <note>
  303: </note>
  304: </file>
  305: <file>
  306:   <source>doc/loncapafiles/update_queue_slots.piml</source>
  307:   <target dist='default'>update_queue_slots.piml</target>
  308:   <categoryname>system file</categoryname>
  309:   <description>
  310: Update the slots definitons from havin @ to having :
  311:   </description>
  312:   <note>
  313:   </note>
  314: </file>
  315: <file>
  316:   <source>doc/loncapafiles/wrap_setuid.piml</source>
  317:   <target dist='default'>wrap_setuid.piml</target>
  318:   <categoryname>system file</categoryname>
  319:   <description>
  320: Wraps the setuid perl scripts into a binary excutable wrapper.
  321:   </description>
  322:   <note>
  323:   </note>
  324: </file>
  325: <file>
  326:   <source>doc/loncapafiles/latex_fixup.piml</source>
  327:   <target dist='default'>latex_fixup.piml</target>
  328:   <categoryname>system file</categoryname>
  329:   <description>
  330: Runs /usr/bin/mktexlsr so LaTeX sees files added to texmf/tex/latex/base
  331:   </description>
  332:   <note>
  333:   </note>
  334: </file>
  335: <file>
  336:   <source>doc/loncapafiles/picins_check.piml</source>
  337:   <target dist='default'>picins_check.piml</target>
  338:   <categoryname>system file</categoryname>
  339:   <description>
  340: If picins.sty is absent, retrieves from CTAN and runs texinfo rehash 
  341: and fmtutil-sys --missing.
  342:   </description>
  343:   <note>
  344:   </note>
  345: </file>
  346: <file>
  347:   <source>doc/loncapafiles/mimetex_version_check.piml</source>
  348:   <target dist='default'>mimetex_version_check.piml</target>
  349:   <categoryname>system file</categoryname>
  350:   <description>
  351: If mimeTeX cgi has been updated will update version number in 
  352: /home/httpd/lonTabs/mimetex-version and remove any .gif files from 
  353: /home/httpd/cgi-bin/mimtexcache/
  354:   </description>
  355:   <note>
  356:   </note>
  357: </file>
  358: <file>
  359: <source>doc/loncapafiles/valid_hosts.xfml</source>
  360: <target dist='default'>valid_hosts.xfml</target>
  361: <categoryname>system file</categoryname>
  362: <description>
  363: Useful for extracting (and pushing/pulling) information relevant
  364: to hosts.tab.
  365: </description>
  366: <note>
  367: </note>
  368: </file>
  369: <file>
  370: <source>loncom/build/check-rpms</source>
  371: <target dist='default'>check-rpms</target>
  372: <categoryname>system file</categoryname>
  373: <description>
  374: script for checking RPMS against an RPM repository
  375: </description>
  376: <note>
  377: </note>
  378: </file>
  379: <file>
  380: <source>loncom/build/distprobe</source>
  381: <target dist='default'>distprobe</target>
  382: <categoryname>system file</categoryname>
  383: <description>
  384: for probing operating system flavor and version
  385: </description>
  386: <note>
  387: </note>
  388: </file>
  389: <file>
  390: <source>loncom/build/doc_template.pl</source>
  391: <target dist='default'>doc_template.pl</target>
  392: <categoryname>system file</categoryname>
  393: <description>
  394: for making fancy install.lon-capa.org pages
  395: </description>
  396: <note>
  397: </note>
  398: </file>
  399: <file>
  400: <source>loncom/build/filecompare.pl</source>
  401: <target dist='default'>filecompare.pl</target>
  402: <categoryname>system file</categoryname>
  403: <description>
  404: rigorously compare many different values associated between files
  405: </description>
  406: <note>
  407: </note>
  408: </file>
  409: <file>
  410: <source>loncom/build/loncaparestoreconfigurations</source>
  411: <target dist='default'>loncaparestoreconfigurations</target>
  412: <categoryname>system file</categoryname>
  413: <description>
  414: intelligently restore configuration values
  415: </description>
  416: <note>
  417: </note>
  418: </file>
  419: <file>
  420: <source>loncom/build/lpml.dtd</source>
  421: <target dist='default'>lpml.dtd</target>
  422: <categoryname>system file</categoryname>
  423: <description>
  424: DocumentType for LPML
  425: </description>
  426: <note>
  427: </note>
  428: </file>
  429: <file>
  430: <source>loncom/build/lpml_html_posteval.pl</source>
  431: <target dist='default'>lpml_html_posteval.pl</target>
  432: <categoryname>system file</categoryname>
  433: <description>
  434: </description>
  435: <note>
  436: </note>
  437: </file>
  438: <file>
  439: <source>loncom/build/lpml_parse.pl</source>
  440: <target dist='default'>lpml_parse.pl</target>
  441: <categoryname>system file</categoryname>
  442: <description>
  443: parse apart the loncapafiles.lpml and buildfiles.lpml
  444: </description>
  445: <note>
  446: </note>
  447: </file>
  448: <file>
  449: <source>loncom/build/make_domain_coordinator.pl</source>
  450: <target dist='default'>make_domain_coordinator.pl</target>
  451: <categoryname>system file</categoryname>
  452: <description>
  453: make a domain coordinator on a new LON-CAPA system
  454: </description>
  455: <note>
  456: </note>
  457: </file>
  458: <file>
  459:   <source>loncom/build/add_domain_coordinator_privilege.pl</source>
  460:   <target dist='default'>add_domain_coordinator_privilege.pl</target>
  461:   <categoryname>system file</categoryname>
  462:   <description>
  463: add domain coordinator privilege to and exisiting local LON-CAPA user
  464:   </description>
  465:   <note>
  466:   </note>
  467: </file>
  468: <file>
  469: <source>loncom/build/piml.dtd</source>
  470: <target dist='default'>piml.dtd</target>
  471: <categoryname>system file</categoryname>
  472: <description>
  473: DocumentType definition for PIML (part of the LPML system)
  474: </description>
  475: <note>
  476: </note>
  477: </file>
  478: <file>
  479: <source>loncom/build/piml_parse.pl</source>
  480: <target dist='default'>piml_parse.pl</target>
  481: <categoryname>system file</categoryname>
  482: <description>
  483: parse a PIML file
  484: </description>
  485: <note>
  486: </note>
  487: </file>
  488: <file>
  489: <source>loncom/build/pod2html.sh</source>
  490: <target dist='default'>pod2html.sh</target>
  491: <categoryname>system file</categoryname>
  492: <description>
  493: make HTML documentation pages
  494: </description>
  495: <note>
  496: </note>
  497: </file>
  498: <file>
  499: <source>loncom/build/pod2man.sh</source>
  500: <target dist='default'>pod2man.sh</target>
  501: <categoryname>system file</categoryname>
  502: <description>
  503: make UNIX-style manual pages
  504: </description>
  505: <note>
  506: </note>
  507: </file>
  508: <file>
  509: <source>loncom/build/verify.pl</source>
  510: <target dist='default'>verify.pl</target>
  511: <categoryname>system file</categoryname>
  512: <description>
  513: wraps around filecompare.pl for posteval LPML statements
  514: </description>
  515: <note>
  516: </note>
  517: </file>
  518: <file>
  519: <source>loncom/build/verifymodown.pl</source>
  520: <target dist='default'>verifymodown.pl</target>
  521: <categoryname>system file</categoryname>
  522: <description>
  523: double-checks modification and ownership on files
  524: </description>
  525: <note>
  526: </note>
  527: </file>
  528: <file>
  529: <source>loncom/build/xfml.dtd</source>
  530: <target dist='default'>xfml.dtd</target>
  531: <categoryname>system file</categoryname>
  532: <description>
  533: DocumentType definition for XFML (part of the LPML system)
  534: </description>
  535: <note>
  536: </note>
  537: </file>
  538: <file>
  539: <source>loncom/build/xfml_parse.pl</source>
  540: <target dist='default'>xfml_parse.pl</target>
  541: <categoryname>system file</categoryname>
  542: <description>
  543: parses XFML files
  544: </description>
  545: <note>
  546: </note>
  547: </file>
  548: </files>
  549: </lpml>