doc/loncapafiles/loncapafiles.lpml - diff

Return to loncapafiles.lpml CVS log

Up to [LON-CAPA] / doc / loncapafiles

Diff for /doc/loncapafiles/loncapafiles.lpml between versions 1.7 and 1.134

-version 1.7, 2001/05/16 17:24:10
+version 1.134, 2002/06/06 09:06:38
  Line 1
+ <!DOCTYPE lpml PUBLIC "-//TUX/DTD lpml 1.0 Final//EN"
+  "http://lpml.sourceforge.net/DTD/lpml.dtd">
+ <!-- loncapafiles.lpml -->
+ <!-- Scott Harrison -->
+ <!-- $Id$ -->
+ <!--
+ Copyright Michigan State University Board of Trustees
+ This file is part of the LearningOnline Network with CAPA (LON-CAPA).
+ LON-CAPA is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+ LON-CAPA is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+ You should have received a copy of the GNU General Public License
+ along with LON-CAPA; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ /home/httpd/html/adm/gpl.txt
+ http://www.lon-capa.org/
+ -->
+ <!-- Default values must be defined before specific values. -->
+ <!-- If no 'dist' attribute is specified, then it is always installed. -->
+ <!-- If 'dist' attribute is set to  'default', then the specification. -->
+ <!-- is accepted if an alternative distribution is not requested or not -->
+ <!-- defined. -->
  <lpml>
+ <specialnotices>
+ <specialnotice dist='default'>
+ !!! REDHAT 6.2 NOTICE !!!
+ !!! Sometimes an incorrect /etc/hosts file is incorrectly generated !!!
+ !!! This sometimes happens (bad): !!!
+ !!! 127.0.0.1  computer1 localhost.localdomain localhost  !!!
+ !!! Should be: !!!
+ !!! 127.0.0.1  localhost.localdomain  localhost !!!
+ !!! 35.2.3.80  computer1 computer1.notreal.msu.edu !!!
+ </specialnotice>
+ <specialnotice dist='redhat7 redhat7.1'>
+ !!!!!!!!!  REDHAT 7.*   NOTICE   !!!!!!!!!!!!!!!!!!!!
+ !!!!!!!!!  LINE IN Cookie.pm     !!!!!!!!!!!!!!!!!!!!
+ !!!!!!!!!  MUST BE REPLACED DUE  !!!!!!!!!!!!!!!!!!!!
+ !!!!!!!!!  TO PERL 5.6.0 ERROR   !!!!!!!!!!!!!!!!!!!!
+ !!!!!!!!!                        !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+ !!!! The offending line is in CGI/Cookie.pm                           !!
+ !!!!                                                                  !!
+ !!!! it should be changed from                                        !!
+ !!!! $path   = CGI::url(-absolute=>1) unless defined $path;           !!
+ !!!! to                                                               !!
+ !!!! ($path = $ENV{'SCRIPT_NAME'})=~s![^/]+$!! unless $path;          !!
+ !!!!                                                                  !!
+ !!!! (This is just below the following line )                         !!
+ !!!! # IE requires the path and domain to be present for some reason. !!
+ </specialnotice>
+ </specialnotices>
  <targetroot>/</targetroot>
  <sourceroot>/home/user/loncapa/</sourceroot>
+ <categories>
  <category name="interface file" type="runtime">
    <chmod dist='default'>0444</chmod><chown dist='default'>root:root</chown>
+   <abbreviation>interfacefile</abbreviation>
  </category>
  <category name="interface file" type="development">
    <chmod dist='default'>0644</chmod><chown dist='default'>www:www</chown>
+   <abbreviation>interfacefile</abbreviation>
  </category>
  <category name="setuid script" type="runtime">
    <chmod dist='default'>6755</chmod><chown dist='default'>root:root</chown>
+   <abbreviation>setuid</abbreviation>
  </category>
  <category name="setuid script" type="development">
    <chmod dist='default'>6755</chmod><chown dist='default'>root:root</chown>
+   <abbreviation>setuid</abbreviation>
  </category>
  <category name="handler" type="runtime">
    <chmod dist='default'>0444</chmod><chown dist='default'>root:root</chown>
+   <abbreviation>handler</abbreviation>
  </category>
  <category name="handler" type="development">
    <chmod dist='default'>0600</chmod><chown dist='default'>www:www</chown>
+   <abbreviation>handler</abbreviation>
  </category>
  <category name="static conf" type="runtime">
    <chmod dist='default'>0444</chmod><chown dist='default'>root:root</chown>
+   <abbreviation>static</abbreviation>
  </category>
  <category name="static conf" type="development">
    <chmod dist='default'>0444</chmod><chown dist='default'>root:root</chown>
+   <abbreviation>static</abbreviation>
  </category>
  <category name="conf" type="runtime">
    <chmod dist='default'>0644</chmod><chown dist='default'>root:root</chown>
+   <abbreviation>configurable</abbreviation>
  </category>
  <category name="conf" type="development">
    <chmod dist='default'>0644</chmod><chown dist='default'>root:root</chown>
+   <abbreviation>configurable</abbreviation>
  </category>
  <category name="script" type="runtime">
-   <chmod dist='default'>0700</chmod><chown dist='default'>www:www</chown>
+   <chmod dist='default'>0500</chmod><chown dist='default'>www:www</chown>
+   <abbreviation>script</abbreviation>
  </category>
  <category name="script" type="development">
-   <chmod dist='default'>0500</chmod><chown dist='default'>www:www</chown>
+   <chmod dist='default'>0700</chmod><chown dist='default'>www:www</chown>
+   <abbreviation>script</abbreviation>
  </category>
  <category name="graphic file" type="runtime">
    <chmod dist='default'>0444</chmod><chown dist='default'>root:root</chown>
+   <abbreviation>graphicfile</abbreviation>
  </category>
  <category name="graphic file" type="development">
    <chmod dist='default'>0400</chmod><chown dist='default'>www:www</chown>
+   <abbreviation>graphicfile</abbreviation>
+ </category>
+ <category name="doc" type="runtime">
+   <chmod dist='default'>0644</chmod><chown dist='default'>root:root</chown>
+   <abbreviation>systemfile</abbreviation>
+ </category>
+ <category name="doc" type="development">
+   <chmod dist='default'>0644</chmod><chown dist='default'>root:root</chown>
+   <abbreviation>systemfile</abbreviation>
  </category>
  <category name="system file" type="runtime">
    <chmod dist='default'>0644</chmod><chown dist='default'>root:root</chown>
+   <abbreviation>systemfile</abbreviation>
  </category>
  <category name="system file" type="development">
    <chmod dist='default'>0644</chmod><chown dist='default'>root:root</chown>
+   <abbreviation>systemfile</abbreviation>
  </category>
  <category name="root script" type="runtime">
    <chmod dist='default'>0700</chmod><chown dist='default'>root:root</chown>
+   <abbreviation>rootscript</abbreviation>
  </category>
  <category name="root script" type="development">
    <chmod dist='default'>0700</chmod><chown dist='default'>root:root</chown>
+   <abbreviation>rootscript</abbreviation>
  </category>
  <category name="symbolic link" type="runtime">
    <chmod dist='default'></chmod><chown dist='default'>root:root</chown>
+   <abbreviation>link</abbreviation>
  </category>
  <category name="symbolic link" type="development">
    <chmod dist='default'></chmod><chown dist='default'>root:root</chown>
+   <abbreviation>link</abbreviation>
  </category>
  <category name="standard" type="runtime">
    <chmod dist='default'>0755</chmod><chown dist='default'>root:root</chown>
+   <abbreviation>directory</abbreviation>
  </category>
  <category name="standard" type="development">
    <chmod dist='default'>0755</chmod><chown dist='default'>root:root</chown>
+   <abbreviation>directory</abbreviation>
  </category>
  <category name="server standard" type="runtime">
    <chmod dist='default'>0700</chmod><chown dist='default'>www:www</chown>
+   <abbreviation>directory</abbreviation>
  </category>
  <category name="server standard" type="development">
    <chmod dist='default'>0755</chmod><chown dist='default'>www:www</chown>
+   <abbreviation>directory</abbreviation>
  </category>
  <category name="server readonly" type="runtime">
    <chmod dist='default'>0500</chmod><chown dist='default'>www:www</chown>
+   <abbreviation>directory</abbreviation>
  </category>
  <category name="server readonly" type="development">
    <chmod dist='default'>0700</chmod><chown dist='default'>www:www</chown>
+   <abbreviation>directory</abbreviation>
  </category>
+ </categories>
  <rpm>
    <rpmSummary>Basic files for running a LON-CAPA server.</rpmSummary>
    <rpmName>LON-CAPA-base</rpmName>
    <rpmVersion>3.1</rpmVersion>
    <rpmRelease>1</rpmRelease>
-   <rpmVendor>Laboratory for Instructional Technology Education, Division of Science and Mathematics Education, Michigan State University.</rpmVendor>
+   <rpmVendor>Laboratory for Instructional Technology Education,
+ Division of Science and Mathematics Education, Michigan State University.
+   </rpmVendor>
    <rpmBuildRoot>/home/harris41/LON-CAPA-BuildRoot</rpmBuildRoot>
    <rpmCopyright>GNU General Public License. Version 2, June 1991.  Michigan State University patents may apply.</rpmCopyright>
    <rpmGroup>Utilities/System</rpmGroup>
    <rpmSource>LON-CAPA-base-3.1.tar.gz</rpmSource>
    <rpmAutoReqProv>no</rpmAutoReqProv>
-   <rpmdescription>This package facilitates a base installation of LON-CAPA files in their directories.\nThe files in this package are only those directly associated with the network communication\nlayer established through direct server-to-server communications (via lond and lonc); plus\nthose which configure (but otherwise not constitute) external software packages like Apache\nand Athena-Kerberos.  For more on the LON-CAPA project, visit http://www.lon-capa.org/.</rpmdescription>
+   <rpmdescription>This package facilitates a base installation of LON-CAPA \n
-   <rpmpre>echo '***********************************************************************'\necho 'LON-CAPA  LearningOnline with CAPA'\necho 'http://www.lon-capa.org/'\necho 'Gerd Kortemeyer, et al'\necho 'Laboratory for Instructional Technology Education'\necho 'Michigan State University'\necho 'General Public License, Version 2, June 1991'\necho '** Michigan State University patents may apply **'\necho ' '\necho 'This installation assumes an installation of Redhat 6.2'\necho ' '\necho 'The server computer should be currently connected to the ethernet'\necho ' '\necho 'The files in this package are only those directly associated with the network communication'\necho 'layer established through direct server-to-server communications (via lond and lonc); plus'\necho 'those which configure (but otherwise not constitute) external software packages like Apache'\necho 'and Athena-Kerberos.'\necho '***********************************************************************'\n</rpmpre>
+ files in their directories.\n
+ For more on the LON-CAPA project, visit http://www.lon-capa.org/.
+   </rpmdescription>
+   <rpmpre>echo '***********************************************************************'\n
+ echo 'LON-CAPA  LearningOnline with CAPA'\n
+ echo 'http://www.lon-capa.org/'\n
+ echo 'Gerd Kortemeyer, et al'\n
+ echo 'Laboratory for Instructional Technology Education'\n
+ echo 'Michigan State University'\n
+ echo 'General Public License, Version 2, June 1991'\n
+ echo '** Michigan State University patents may apply **'\n
+ echo ' '\n
+ echo 'This installation assumes an installation of Redhat 6.2'\n
+ echo ' '\n
+ echo 'The server computer should be currently connected to the ethernet'\n
+ echo ' '\n
+ echo '***********************************************************************'\n
+ </rpmpre>
+ <rpmRequires>
+ <item>PreReq: LON-CAPA-setup</item>
+ <item>PreReq: apache</item>
+ <item>PreReq: /etc/httpd/conf/httpd.conf</item>
+ </rpmRequires>
  </rpm>
- <directory>
+ <directories>
+ <directory dist='default'>
+   <targetdir dist='default'>etc</targetdir>
+   <categoryname>standard</categoryname>
+   <description>standard linux directory for configuration files</description>
+ </directory>
+ <directory dist='default'>
+   <targetdir dist='default'>etc/atalk</targetdir>
+   <categoryname>standard</categoryname>
+   <description>appletalk configuration files</description>
+ </directory>
+ <directory dist='default'>
+   <targetdir dist='default'>etc/cron.d</targetdir>
+   <categoryname>standard</categoryname>
+   <description>standard linux directory for running time-based "jobs"
+   </description>
+ </directory>
+ <directory dist='default'>
    <targetdir dist='default'>etc/httpd/conf</targetdir>
    <categoryname>standard</categoryname>
    <description>web configuration files</description>
  </directory>
- <directory>
+ <directory dist='default'>
+   <targetdir dist='default'>etc/ntp</targetdir>
+   <categoryname>standard</categoryname>
+   <description>configuration directory for network time protocol</description>
+ </directory>
+ <directory dist='default'>
+   <targetdir dist='default'>etc/pam.d</targetdir>
+   <categoryname>standard</categoryname>
+   <description>configuration directory for password authentication mechanism
+   </description>
+ </directory>
+ <directory dist='default'>
+   <targetdir dist='redhat7 redhat7.1'>etc/samba</targetdir>
+   <categoryname>standard</categoryname>
+   <description>configuration directory for samba authentication
+   </description>
+ </directory>
+ <directory dist='default'>
+   <targetdir dist='default'>etc/rc.d/init.d</targetdir>
+   <targetdir dist='debian2.2'>etc/init.d</targetdir>
+   <categoryname>standard</categoryname>
+   <description>scripts that run during system startup</description>
+ </directory>
+ <directory dist='default'>
+   <targetdir dist='default'>etc/rc.d/rc0.d</targetdir>
+   <targetdir dist='debian2.2'>etc/rc0.d</targetdir>
+   <categoryname>standard</categoryname>
+   <description>scripts that run for run-level 0</description>
+ </directory>
+ <directory dist='default'>
+   <targetdir dist='default'>etc/rc.d/rc1.d</targetdir>
+   <targetdir dist='debian2.2'>etc/rc1.d</targetdir>
+   <categoryname>standard</categoryname>
+   <description>scripts that run for run-level 1</description>
+ </directory>
+ <directory dist='default'>
+   <targetdir dist='default'>etc/rc.d/rc2.d</targetdir>
+   <targetdir dist='debian2.2'>etc/rc2.d</targetdir>
+   <categoryname>standard</categoryname>
+   <description>scripts that run for run-level 2</description>
+ </directory>
+ <directory dist='default'>
+   <targetdir dist='default'>etc/rc.d/rc3.d</targetdir>
+   <targetdir dist='debian2.2'>etc/rc3.d</targetdir>
+   <categoryname>standard</categoryname>
+   <description>scripts that run for run-level 3</description>
+ </directory>
+ <directory dist='default'>
+   <targetdir dist='default'>etc/rc.d/rc4.d</targetdir>
+   <targetdir dist='debian2.2'>etc/rc4.d</targetdir>
+   <categoryname>standard</categoryname>
+   <description>scripts that run for run-level 4</description>
+ </directory>
+ <directory dist='default'>
+   <targetdir dist='default'>etc/rc.d/rc5.d</targetdir>
+   <targetdir dist='debian2.2'>etc/rc5.d</targetdir>
+   <categoryname>standard</categoryname>
+   <description>scripts that run for run-level 5</description>
+ </directory>
+ <directory dist='default'>
+   <targetdir dist='default'>etc/rc.d/rc6.d</targetdir>
+   <targetdir dist='debian2.2'>etc/rc6.d</targetdir>
+   <categoryname>standard</categoryname>
+   <description>scripts that run for run-level 6</description>
+ </directory>
+ <directory dist='default'>
    <targetdir dist='default'>home/httpd/lonTabs</targetdir>
    <categoryname>standard</categoryname>
    <description>tab-formatted reference files</description>
  </directory>
- <directory>
+ <directory dist='default'>
    <targetdir dist='default'>home/httpd</targetdir>
    <categoryname>standard</categoryname>
    <description>start of the web server tree</description>
  </directory>
- <directory>
+ <directory dist='default'>
-   <targetdir dist='default'>etc</targetdir>
-   <categoryname>standard</categoryname>
-   <description>standard linux directory for configuration files</description>
- </directory>
- <directory>
    <targetdir dist='default'>home/httpd/perl</targetdir>
-   <categoryname>standard</categoryname>
+   <categoryname>server readonly</categoryname>
    <description>perl scripts for managing the LON-CAPA system</description>
  </directory>
- <directory>
+ <directory dist='default'>
    <targetdir dist='default'>home/httpd/perl/logs</targetdir>
    <categoryname>server standard</categoryname>
-   <description>location where system performance and error logs are kept</description>
+   <description>location where system performance and error logs are kept
+   </description>
  </directory>
- <directory>
+ <directory dist='default'>
+   <targetdir dist='default'>home/httpd/html/lon-status/londchld</targetdir>
+   <categoryname>server standard</categoryname>
+   <description>
+ Used by lond parent to check if children are responding to USR1 signals
+ (otherwise they are killed and replaced).
+   </description>
+ </directory>
+ <directory dist='default'>
    <targetdir dist='default'>home/httpd/perl/tmp</targetdir>
    <categoryname>server standard</categoryname>
-   <description>location where temporary files (for caching) are stored</description>
+   <description>location where temporary files (for caching) are stored
+   </description>
  </directory>
- <directory>
+ <directory dist='default'>
+   <targetdir dist='default'>home/httpd/prtspool</targetdir>
+   <categoryname>server standard</categoryname>
+   <description>for the output of lonprintout.pm
+   </description>
+ </directory>
+ <directory dist='default'>
+   <targetdir dist='default'>home/httpd/lib/perl</targetdir>
+   <categoryname>server readonly</categoryname>
+   <description>location of LON-CAPA non web mod-perl handlers</description>
+ </directory>
+ <directory dist='default'>
    <targetdir dist='default'>home/httpd/lib/perl/Apache</targetdir>
    <categoryname>server readonly</categoryname>
    <description>location of LON-CAPA web mod-perl handlers</description>
  </directory>
- <directory>
+ <directory dist='default'>
+   <targetdir dist='default'>home/httpd/lib/perl/HTML</targetdir>
+   <categoryname>server readonly</categoryname>
+   <description>location of HTML specific perl module fixes and additions
+   </description>
+ </directory>
+ <directory dist='default'>
+   <targetdir dist='default'>home/httpd/lib/perl/LONCAPA</targetdir>
+   <categoryname>server readonly</categoryname>
+   <description>location of HTML specific perl module fixes and additions
+   </description>
+ </directory>
+ <directory dist='default'>
    <targetdir dist='default'>home/httpd/lonIDs</targetdir>
    <categoryname>server standard</categoryname>
    <description>cookie jar</description>
  </directory>
- <directory>
+ <directory dist='default'>
    <targetdir dist='default'>home/httpd/sockets</targetdir>
    <categoryname>server standard</categoryname>
    <description>lonc's sockets</description>
  </directory>
- <directory>
+ <directory dist='default'>
    <targetdir dist='default'>home/httpd/sockets/delayed</targetdir>
    <categoryname>server standard</categoryname>
    <description>lonc's sockets (delayed)</description>
  </directory>
- <directory>
+ <directory dist='default'>
+   <targetdir dist='default'>home/httpd/cgi-bin</targetdir>
+   <categoryname>standard</categoryname>
+   <description>location of cgi scripts</description>
+ </directory>
+ <directory dist='default'>
    <targetdir dist='default'>home/httpd/html</targetdir>
    <categoryname>server standard</categoryname>
    <description>location of web-accessible file tree</description>
  </directory>
- <directory>
+ <directory dist='default'>
    <targetdir dist='default'>home/httpd/html/res</targetdir>
    <categoryname>server standard</categoryname>
    <description>root of resource tree</description>
  </directory>
- <directory>
+ <directory dist='default'>
    <targetdir dist='default'>home/httpd/html/adm</targetdir>
    <categoryname>server readonly</categoryname>
    <description>unauthenticated resources</description>
  </directory>
- <directory>
+ <directory dist='default'>
    <targetdir dist='default'>home/httpd/html/adm/rat</targetdir>
    <categoryname>server readonly</categoryname>
    <description>home of the rat</description>
  </directory>
- <directory>
+ <directory dist='default'>
+   <targetdir dist='default'>home/httpd/html/adm/help</targetdir>
+   <categoryname>server readonly</categoryname>
+   <description>online help documentation</description>
+ </directory>
+ <directory dist='default'>
+   <targetdir dist='default'>home/httpd/html/adm/help/lib/perl</targetdir>
+   <categoryname>server readonly</categoryname>
+   <description>online help documentation for the LON-CAPA programming
+ interface</description>
+ </directory>
+ <directory dist='default'>
+   <targetdir dist='default'>home/httpd/html/adm/help/lib/perl/Apache
+   </targetdir>
+   <categoryname>server readonly</categoryname>
+   <description>online help documentation for the LON-CAPA programming
+ interface, Apache (mod_perl) handlers</description>
+ </directory>
+ <directory dist='default'>
+   <targetdir dist='default'>home/httpd/html/adm/help/scripts</targetdir>
+   <categoryname>server readonly</categoryname>
+   <description>online help documentation for the LON-CAPA programming
+ interface, Apache (mod_perl) handlers</description>
+ </directory>
+ <directory dist='default'>
    <targetdir dist='default'>home/httpd/html/adm/lonIcons</targetdir>
    <categoryname>server readonly</categoryname>
    <description>graphic widgets</description>
  </directory>
- <directory>
+ <directory dist='default'>
    <targetdir dist='default'>home/httpd/html/adm/lonMisc</targetdir>
    <categoryname>server readonly</categoryname>
-   <description></description>
+   <description>miscellaneous resources</description>
  </directory>
- <directory>
+ <directory dist='default'>
    <targetdir dist='default'>home/httpd/html/adm/lonKaputt</targetdir>
    <categoryname>server readonly</categoryname>
    <description>error warnings and icons</description>
  </directory>
- <directory>
+ <directory dist='default'>
    <targetdir dist='default'>home/httpd/lonUsers</targetdir>
    <categoryname>server standard</categoryname>
-   <description><br />Home directories of local users.  There is a five-tier
+   <description>Home directories of local users.  There is a five-tier
  structure to the directories:
  [domain]/[firstletter]/[secondletter]/[thirdletter]/[userid].  For example,
  a user fredflint at MSU would have his information located in
- lonUsers/msu/f/r/e/fredflint.<P>Within this directory there are a variety
+ lonUsers/msu/f/r/e/fredflint.<br />&#160;<br />Within this directory there are
- of files which govern the scope of what a user can do within the LON-CAPA
+ a variety of files which govern the scope of what a user can do within the
- system.  A passwd file determines the type of authentication mechanism to use.
+ LON-CAPA system.  A passwd file determines the type of authentication
-  There is also are files such as roles.hist (and its database compilation,
+ mechanism to use.
+  There also are files such as roles.hist (and its database compilation,
  roles.db) which specify the roles and privileges for a user in the
  LON-CAPA system.</description>
  </directory>
- <directory>
+ <directory dist='default'>
-   <targetdir dist='default'>home/httpd/html/lon-status</targetdir>
-   <categoryname>server standard</categoryname>
-   <description>status reports</description>
- </directory>
- <directory>
-   <targetdir dist='default'>usr/lib/perl5/site_perl/5.005</targetdir>
-   <categoryname>standard</categoryname>
-   <description>system perl tree (usually present on linux systems)</description>
- </directory>
- <directory>
    <targetdir dist='default'>home/httpd/html/adm/MathML</targetdir>
    <categoryname>server readonly</categoryname>
    <description>mathematics markup language resources</description>
  </directory>
- <directory>
+ <directory dist='default'>
    <targetdir dist='default'>home/httpd/html/res/adm/includes</targetdir>
    <categoryname>server readonly</categoryname>
-   <description>files useful for including within customized scripting</description>
+   <description>files useful for including within customized scripting
+   </description>
+ </directory>
+ <directory dist='default'>
+   <targetdir dist='default'>home/httpd/html/res/adm/includes/templates
+   </targetdir>
+   <categoryname>server readonly</categoryname>
+   <description>template files useful for customized scripts</description>
  </directory>
- <directory>
+ <directory dist='default'>
    <targetdir dist='default'>home/httpd/html/lon-status</targetdir>
    <categoryname>server standard</categoryname>
-   <description>status reports</description>
+   <description>status reports; online logs are kept that
+ are viewable over the world-wide web</description>
  </directory>
- <directory>
+ <directory dist='default'>
    <targetdir dist='default'>home/httpd/html/res/adm/pages</targetdir>
    <categoryname>server readonly</categoryname>
    <description>web user interface resources</description>
  </directory>
- <directory>
+ <directory dist='default'>
-   <targetdir dist='default'>home/httpd/html/res/adm/pages/bookmarkmenu</targetdir>
+   <targetdir dist='default'>home/httpd/html/res/adm/pages/bookmarkmenu
+   </targetdir>
    <categoryname>server readonly</categoryname>
    <description>bookmark user interface code</description>
  </directory>
- <directory>
+ <directory dist='default'>
-   <targetdir dist='default'>home/httpd/html/res/adm/pages/annotations</targetdir>
+   <targetdir dist='default'>home/httpd/html/res/adm/pages/annotations
+   </targetdir>
    <categoryname>server readonly</categoryname>
    <description></description>
  </directory>
- <directory>
+ <directory dist='default'>
-   <targetdir dist='default'>usr/sbin</targetdir>
+   <targetdir dist='default'>home/httpd/html/res/adm/pages/indexericons
-   <categoryname>standard</categoryname>
+   </targetdir>
-   <description>standard linux directory for superuser executables</description>
+   <categoryname>server readonly</categoryname>
- </directory>
+   <description>icons that help depict the file system (outdated)</description>
- <directory>
-   <targetdir dist='default'>etc/cron.d</targetdir>
-   <categoryname>standard</categoryname>
-   <description>standard linux directory for running time-based "jobs"</description>
- </directory>
- <directory>
-   <targetdir dist='default'>etc/ntp</targetdir>
-   <categoryname>standard</categoryname>
-   <description>configuration directory for network time protocol</description>
- </directory>
- <directory>
-   <targetdir dist='default'>etc/rc.d/init.d</targetdir>
-   <categoryname>standard</categoryname>
-   <description>scripts that run during system startup</description>
- </directory>
- <directory>
-   <targetdir dist='default'>etc/rc.d/rc0.d</targetdir>
-   <categoryname>standard</categoryname>
-   <description>scripts that run for run-level 0</description>
- </directory>
- <directory>
-   <targetdir dist='default'>etc/rc.d/rc1.d</targetdir>
-   <categoryname>standard</categoryname>
-   <description>scripts that run for run-level 1</description>
- </directory>
- <directory>
-   <targetdir dist='default'>etc/rc.d/rc2.d</targetdir>
-   <categoryname>standard</categoryname>
-   <description>scripts that run for run-level 2</description>
  </directory>
- <directory>
+ <directory dist='default'>
-   <targetdir dist='default'>etc/rc.d/rc3.d</targetdir>
+   <targetdir dist='default'>usr/lib/perl5/site_perl/5.005</targetdir>
+   <targetdir dist='redhat7 redhat7.1'>usr/lib/perl5/site_perl/5.6.0</targetdir>
+   <targetdir dist='debian2.2'>usr/local/lib/perl/5.6.0</targetdir>
    <categoryname>standard</categoryname>
-   <description>scripts that run for run-level 3</description>
+   <description>system perl tree (usually present on linux systems)
+   </description>
  </directory>
- <directory>
+ <directory dist='default'>
-   <targetdir dist='default'>etc/rc.d/rc4.d</targetdir>
+   <targetdir dist='default'>usr/local/bin</targetdir>
    <categoryname>standard</categoryname>
-   <description>scripts that run for run-level 4</description>
+   <description>local binary files</description>
  </directory>
- <directory>
+ <directory dist='default'>
-   <targetdir dist='default'>etc/rc.d/rc5.d</targetdir>
+   <targetdir dist='default'>usr/local/man/man1</targetdir>
    <categoryname>standard</categoryname>
-   <description>scripts that run for run-level 5</description>
+   <description>local manual pages</description>
  </directory>
- <directory>
+ <directory dist='default'>
-   <targetdir dist='default'>etc/rc.d/rc6.d</targetdir>
+   <targetdir dist='default'>usr/man/man1</targetdir>
    <categoryname>standard</categoryname>
-   <description>scripts that run for run-level 6</description>
+   <description>manual pages</description>
  </directory>
- <directory>
+ <directory dist='default'>
-   <targetdir dist='default'>etc/rc.d/rc7.d</targetdir>
+   <targetdir dist='default'>usr/man/man3</targetdir>
    <categoryname>standard</categoryname>
-   <description>scripts that run for run-level 7</description>
+   <description>manual pages</description>
  </directory>
- <directory>
+ <directory dist='default'>
-   <targetdir dist='default'>etc/atalk</targetdir>
+   <targetdir dist='default'>usr/sbin</targetdir>
    <categoryname>standard</categoryname>
-   <description>appletalk configuration files</description>
+   <description>standard linux directory for superuser executables</description>
- </directory>
- <directory>
-   <targetdir dist='default'>home/httpd/html/res/adm/pages/indexericons</targetdir>
-   <categoryname>server readonly</categoryname>
-   <description>icons that help depict the file system</description>
  </directory>
+ </directories>
+ <files>
  <file>
- <source>loncom/access.conf</source>
+ <source>loncom/krb.conf</source>
- <target dist='default'>etc/httpd/conf/access.conf</target>
+ <target dist='default'>etc/krb.conf</target>
  <categoryname>conf</categoryname>
  <description>
- This file has two major functions.
+ which Kerberos server to contact for specified Kerberos domains
- For the Apache web server, it defines a global
- access configuration which defines what server options (Indexes", "Includes",
- "FollowSymLinks", "ExecCGI", or "MultiViews") are associated
- with specific directories ("/", "/home/httpd/html", "/home/httpd/cgi-bin",
- and "/usr/doc").  For the LON-CAPA network server and perl module
- handlers, it defines machine specific settings (lonHostID, lonRole,
- lonAdmEMail, lonDefDomain, lonLoadLim, lonExpire, and lonReceipt)
- and internal machine settings for specific directories, socket ports,
- and browser detection logic.
  </description>
  <note>
- <b>configure</b>
+ <table cellpadding='0' cellspacing='0' border='1'>
+ <tr><td>
+ list elements are separated by newlines
+ </td></tr>
+ <tr><td>
+ each list element consists of only two subelements separated by a colon
  <br />
- <table cellpadding=0 cellspacing=0 border=1>
+ <ul>
- <tr><td><tt>lonHostID</tt></td><td>LON-internal HostID of this machine</td></tr>
+ <li>Kerberos domain value</li>
- <tr><td><tt>lonRole</tt></td><td>Role of this machine: library, access</td></tr>
+ <li>Kerberos server IP address</li>
- <tr><td><tt>lonAdmEMail</tt></td><td>Server Administration</td></tr>
+ </ul>
- <tr><td><tt>lonDefDomain</tt></td><td>Default domain</td></tr>
+ </td></tr>
- <tr><td><tt>lonLoadLim</tt></td><td>Load Limit ( 100% loadavg )</td></tr>
- <tr><td><tt>lonExpire</tt></td><td>Expiration for local copies in seconds</td></tr>
  </table>
  </note>
  </file>
  <file>
- <source>loncom/httpd.conf</source>
+ <source>loncom/loncapa.conf</source>
- <target dist='default'>etc/httpd/conf/httpd.conf</target>
+ <target dist='default'>etc/httpd/conf/loncapa.conf</target>
- <categoryname>static conf</categoryname>
+ <categoryname>conf</categoryname>
  <description>
- This is the main server configuration file.  The settings here are
+ <p>
- more or less standard for the Apache web server.  Most notably (and
+ The goal of this file is to implement all LON-CAPA specific
- importantly!), perl handling and mod_perl are enabled in this configuration
+ customization of the Apache web server (most all of these values
- file.
+ require manual input from the system administrator at some point).
+ The values in this file, as opposed to loncapa_apache.conf, are
+ meant to be machine and institution specific.
+ </p>
+ <p>
+ For the LON-CAPA network server and perl module
+ handlers, it defines machine specific settings including lonHostID, lonRole,
+ lonAdmEMail, lonDefDomain, lonLoadLim, lonExpire, and lonReceipt.
+ </p>
+ <p>
+ This file should not be viewable by regular users of the system.
+ Only root and www should be able to view the contents of this file
+ since lonReceipt is sensitive.
+ </p>
  </description>
+ <note>
+ <b>configure</b>
+ <br />
+ <table cellpadding='0' cellspacing='0' border='1'>
+ <tr><td><tt>lonHostID</tt></td><td>LON-internal HostID of this
+ machine</td></tr>
+ <tr><td><tt>lonRole</tt></td><td>Role of this machine: library,
+ access</td></tr>
+ <tr><td><tt>lonAdmEMail</tt></td><td>Server Administration</td></tr>
+ <tr><td><tt>lonDefDomain</tt></td><td>Default domain</td></tr>
+ <tr><td><tt>lonLoadLim</tt></td><td>Load Limit ( 100% loadavg )</td></tr>
+ <tr><td><tt>lonExpire</tt></td><td>Expiration for local copies in
+ seconds</td></tr>
+ <tr><td><tt>lonReceipt</tt></td><td>Machine authentication number</td></tr>
+ <tr><td><tt>lonSqlAccess</tt></td><td>Password for www@localhost to access
+ MySQL database</td></tr>
+ </table>
+ </note>
  </file>
  <file>
- <source>loncom/srm.conf</source>
+ <source>loncom/loncapa_apache.conf</source>
- <target dist='default'>etc/httpd/conf/srm.conf</target>
+ <target dist='default'>etc/httpd/conf/loncapa_apache.conf</target>
  <categoryname>static conf</categoryname>
  <description>
- <p>
+ The goal of this file is to implement all LON-CAPA specific
- This file configures the "name space" of the Apache web server.
+ customization of the Apache web server that does not require
- <tt>srm.conf</tt>
+ user input.
- defines when specific perl modules should be called to handle a given
- request.  This definition is a function of both the name of the perl module,
+ For the Apache web server, it defines a global
- and a specific regular expression associated with the URL, such as
+ access configuration which defines what server options (Indexes", "Includes",
- "^/res/.*\.page".
+ "FollowSymLinks", "ExecCGI", or "MultiViews") are associated
- </p>
+ with specific directories ("/", "/home/httpd/html", "/home/httpd/cgi-bin",
- <p>
+ and "/usr/doc").  For the LON-CAPA network server and perl module
- Here is an example entry:
+ handlers, it defines
- <pre>
+ and internal machine settings for specific directories, socket ports,
- &lt;LocationMatch "^/res/.*\.page$&gt;
+ the www@localhost MySQL password, and browser detection logic.
- SetHandler perl-script
- PerlHandler Apache::lonpage
- &lt;/LocationMatch&gt;
- </pre>
- </p>
  </description>
  </file>
  <file>
- Line 383  well as causing the Apache module to be
+ Line 640  well as causing the Apache module to be
  </description>
  </file>
  <file>
+ <source>loncom/publisher/thesaurus.dat</source>
+ <target dist='default'>home/httpd/lonTabs/thesaurus.dat</target>
+ <categoryname>static conf</categoryname>
+ <description>
+ Custom Thesaurus file for LON-CAPA, in the format
+ word@wordID@frequency@relatedwordID:frequency,relatedwordID:frequency,...
+ </description>
+ </file>
+ <file>
+ <source>loncom/interface/mydesk.tab</source>
+ <target dist='default'>home/httpd/lonTabs/mydesk.tab</target>
+ <categoryname>static conf</categoryname>
+ <description>
+ Config file for "My Desk"
+ </description>
+ </file>
+ <file>
  <source>loncom/interface/filetypes.tab</source>
  <target dist='default'>home/httpd/lonTabs/filetypes.tab</target>
  <categoryname>static conf</categoryname>
- Line 391  Descriptive list of file extensions, and
+ Line 665  Descriptive list of file extensions, and
  </description>
  </file>
  <file>
+ <source>loncom/cgi/barcode.gif</source>
+ <target dist='default'>home/httpd/cgi-bin/barcode.gif</target>
+ <categoryname>script</categoryname>
+ <description>
+ Dynamically outputs a barcode based on a CGI passed encode=BARCODEVALUE
+ parameter.
+ </description>
+ </file>
+ <file>
+ <source>loncom/cgi/thumbnail.gif</source>
+ <target dist='default'>home/httpd/cgi-bin/thumbnail.gif</target>
+ <categoryname>script</categoryname>
+ <description>
+ Produces a thumbnail image of the url given
+ </description>
+ </file>
+ <file>
+ <source>loncom/cgi/clusterstatus.pl</source>
+ <target dist='default'>home/httpd/cgi-bin/clusterstatus.pl</target>
+ <categoryname>script</categoryname>
+ <description>
+ utility cgi script to view status of cluster
+ </description>
+ </file>
+ <file>
+ <source>loncom/cgi/graph.gif</source>
+ <target dist='default'>home/httpd/cgi-bin/graph.gif</target>
+ <categoryname>script</categoryname>
+ <description>
+ Dynamically outputs a graph especially for lonstatistics.pm.
+ </description>
+ <note>
+ Depends on perl modules:
+ GDGraph-1.33 and GDTextUtils-0.80.
+ </note>
+ </file>
+ <file>
+ <source>loncom/cgi/lonversions.pl</source>
+ <target dist='default'>home/httpd/cgi-bin/lonversions.pl</target>
+ <categoryname>script</categoryname>
+ <description>
+ utility cgi script to view software versions of a remote server
+ </description>
+ </file>
+ <file>
+ <source>loncom/cgi/ping.pl</source>
+ <target dist='default'>home/httpd/cgi-bin/ping.pl</target>
+ <categoryname>script</categoryname>
+ <description>
+ cgi-script to ping other server
+ </description>
+ </file>
+ <file>
+ <source>loncom/cgi/plot.gif</source>
+ <target dist='default'>home/httpd/cgi-bin/plot.gif</target>
+ <categoryname>script</categoryname>
+ <description>
+ Dynamically outputs X-Y plots with point, line, etc functions.
+ </description>
+ </file>
+ <file>
+ <source>loncom/interface/printout.pl</source>
+ <target dist='default'>home/httpd/cgi-bin/printout.pl</target>
+ <categoryname>script</categoryname>
+ <description>
+ cgi script
+ </description>
+ <note>
+ Depends on srm.conf entry:
+ Alias /prtspool/ /home/httpd/prtspool/
+ as well as a /home/httpd/prtspool directory.
+ </note>
+ </file>
+ <file>
+ <source>loncom/cgi/metadata_keywords.pl</source>
+ <target dist='default'>home/httpd/cgi-bin/metadata_keywords.pl</target>
+ <categoryname>script</categoryname>
+ <description>
+ a cgi-script (not mod_perl), which contacts MySQL and pulls
+ out all keywords in this format:
+ coil,magnetic,transformer
+ transformer,coils,current,amperes,voltage,transformers,coil
+ flux,magnetic,current,transformer
+ coil,loop,field,magnetic
+ ... etc (one line per entry).
+ and simply prints this text-only (no markup) to the browser
+ </description>
+ </file>
+ <fileglob>
+ <glob>*.*</glob>
+ <sourcedir>loncom/homework/templates/</sourcedir>
+ <targetdir dist='default'>
+ home/httpd/html/res/adm/includes/templates/</targetdir>
+ <categoryname>static conf</categoryname>
+ <description>
+ Template files for generating new resources.
+ </description>
+ <filenames>
+ blank.library;
+ blank.library.meta;
+ blank.problem;
+ blank.problem.meta;
+ numerical.problem;
+ numerical.problem.meta;
+ Plot.problem;
+ Plot.problem.meta;
+ RadioResponse.problem;
+ RadioResponse.problem.meta;
+ RandomLabelExample.problem;
+ RandomLabelExample.problem.meta;
+ SelectFromOptions-4ConceptGoups.problem;
+ SelectFromOptions-4ConceptGoups.problem.meta;
+ SelectFromOptions-5ConceptGoups.problem;
+ SelectFromOptions-5ConceptGoups.problem.meta;
+ SelectFromOptions-6ConceptGoups.problem;
+ SelectFromOptions-6ConceptGoups.problem.meta;
+ SelectFromOptions-7ConceptGoups.problem;
+ SelectFromOptions-7ConceptGoups.problem.meta;
+ SelectFromOptions-8ConceptGoups.problem;
+ SelectFromOptions-8ConceptGoups.problem.meta;
+ SelectFromOptions-Simple.problem;
+ SelectFromOptions-Simple.problem.meta;
+ script.library;
+ script.library.meta;
+ SimpleFormula.problem;
+ SimpleFormula.problem.meta;
+ StringResponse.problem;
+ StringResponse.problem.meta
+ </filenames>
+ </fileglob>
+ <file>
  <source>loncom/homework/insertlist.tab</source>
  <target dist='default'>home/httpd/lonTabs/insertlist.tab</target>
  <categoryname>static conf</categoryname>
  <description>
- Options available (or suggested) for different homework tags.
+ Describes what tags are allowed inside other tags.
  </description>
  </file>
  <file>
+ <source>CAPA/JavaTools/GLabel.class</source>
+ <target dist='default'>home/httpd/html/res/adm/includes/GLabel.class
+ </target>
+ <categoryname>static conf</categoryname>
+ <description>
+ Java applet for labelling graphs.
+ </description>
+ <note>
+ Built from Glabel.java.  Still working on build/dependency details.
+ </note>
+ </file>
+ <file>
  <source>loncom/interface/default.assesscalc</source>
- <target dist='default'>home/httpd/html/res/adm/includes/default.assesscalc</target>
+ <target dist='default'>home/httpd/html/res/adm/includes/default.assesscalc
+ </target>
  <categoryname>static conf</categoryname>
  <description>
  Default spreadsheet for individual assessment.
- Line 408  Default spreadsheet for individual asses
+ Line 829  Default spreadsheet for individual asses
  </file>
  <file>
  <source>loncom/interface/default.studentcalc</source>
- <target dist='default'>home/httpd/html/res/adm/includes/default.studentcalc</target>
+ <target dist='default'>home/httpd/html/res/adm/includes/default.studentcalc
+ </target>
  <categoryname>static conf</categoryname>
  <description>
  Default spreadsheet for assessment of students.
  </description>
  </file>
  <file>
+ <source>loncom/interface/default.classcalc</source>
+ <target dist='default'>home/httpd/html/res/adm/includes/default.classcalc
+ </target>
+ <categoryname>static conf</categoryname>
+ <description>
+ Default spreadsheet for assessment of a class.
+ </description>
+ </file>
+ <file>
  <source>loncom/auth/roles.tab</source>
  <target dist='default'>home/httpd/lonTabs/roles.tab</target>
  <categoryname>static conf</categoryname>
  <description>
- List of privileges associated with users of multiple types (for example: Teaching
+ List of privileges associated with users of multiple types (for example:
- Assistant, Exam Proctor, Course Coordinator)
+ Teaching Assistant, Exam Proctor, Course Coordinator)
  </description>
  </file>
  <file>
- Line 428  Assistant, Exam Proctor, Course Coordina
+ Line 859  Assistant, Exam Proctor, Course Coordina
  <target dist='default'>home/httpd/lonTabs/rolesplain.tab</target>
  <categoryname>static conf</categoryname>
  <description>
- Descriptive list of abbreviations used in <TT>roles.tab</TT> for user types
+ Descriptive list of abbreviations used in <tt>roles.tab</tt> for user types
  and privileges available in the network with function
  </description>
  </file>
  <file>
  <source>loncom/hosts.tab</source>
  <target dist='default'>home/httpd/lonTabs/hosts.tab</target>
- <categoryname>conf</categoryname>
+ <categoryname>static conf</categoryname>
  <description>
- List of all machines in the LON-CAPA network.  Relates <TT>lonHostID</TT> to
+ List of all machines in the LON-CAPA network.  Relates <tt>lonHostID</tt> to
- <TT>lonDefDomain</TT> and <U>IP address</U>
+ <tt>lonDefDomain</tt> and <u>IP address</u>.
  </description>
  </file>
  <file>
- Line 450  Spare hosts to offload session to if the
+ Line 881  Spare hosts to offload session to if the
  </description>
  <note>
  <b>configure</b><br />
- <table cellpadding=0 cellspacing=0 border=1>
+ <table cellpadding='0' cellspacing='0' border='1'>
  <tr><td>
  list elements are separated by newlines
  </td></tr>
- Line 470  Basic auth password to access /lon-statu
+ Line 901  Basic auth password to access /lon-statu
  </description>
  </file>
  <file>
- <source></source>
- <target dist='default'></target>
- <categoryname></categoryname>
- <description></description>
- </file>
- <file>
- <source>loncom/krb.conf</source>
- <target dist='default'>etc/krb.conf</target>
- <categoryname></categoryname>
- <description>
- which Kerberos server to contact for which Kerberos domains
- </description>
- <note>
- <table cellpadding=0 cellspacing=0 border=1>
- <tr><td>
- list elements are separated by newlines
- </td></tr>
- <tr><td>
- each list element consists of only two subelements separated by a colon
- <br />
- <ul>
- <li>Kerberos domain value</li>
- <li>Kerberos server IP address</li>
- </ul>
- </td></tr>
- </table>
- </note>
- </file>
- <file>
  <source>loncom/smb.conf</source>
  <target dist='default'>etc/smb.conf</target>
+ <target dist='redhat7 redhat7.1'>etc/samba/smb.conf</target>
  <categoryname>conf</categoryname>
  <description>
- configuration file to make LON-CAPA server file space accessible to network neighborhood
+ configuration file to make LON-CAPA server file space accessible to network
+ neighborhood
  </description>
  </file>
  <file>
- Line 514  configuration file to make LON-CAPA serv
+ Line 918  configuration file to make LON-CAPA serv
  which NTP server to contact for information (XNTP3 standard)
  </description>
  <note>
- <table cellpadding=0 cellspacing=0 border=1>
+ <table cellpadding='0' cellspacing='0' border='1'>
  <tr><td>
  only one line needs to be changed to specify a server ip address
  </td></tr>
- Line 525  Example:<br /><nobr /><tt>server ntp.msu
+ Line 929  Example:<br /><nobr /><tt>server ntp.msu
  </note>
  </file>
  <file>
- <source></source>
- <target dist='default'></target>
- <categoryname></categoryname>
- <description></description>
- </file>
- <file>
  <source>loncom/metadata_database/searchcat.pl</source>
  <target dist='default'>home/httpd/perl/searchcat.pl</target>
  <categoryname>script</categoryname>
- Line 547  proxy server
+ Line 945  proxy server
  </description>
  </file>
  <file>
+ <source>doc/man/lonc.1</source>
+ <target dist='default'>usr/man/man1/lonc.1</target>
+ <categoryname>doc</categoryname>
+ <description>man page for lonc</description>
+ <build trigger='always run'>
+ loncom/build/pod2man.sh ../lonc &gt; ../../doc/man/lonc.1 &amp;&amp; \
+ echo 'manifying lonc'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../loncom/lonc
+ </dependencies>
+ </file>
+ <file>
+ <source>doc/scripts/lonc.html</source>
+ <target dist='default'>home/httpd/html/adm/help/scripts/lonc.html</target>
+ <categoryname>doc</categoryname>
+ <description>POD-derived page for lonc</description>
+ <build trigger='always run'>
+ loncom/build/pod2html.sh ../lonc &gt; ../../doc/scripts/lonc.html &amp;&amp; \
+ echo 'pod2html lonc'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../loncom/lonc
+ </dependencies>
+ </file>
+ <file>
  <source>loncom/lond</source>
  <target dist='default'>home/httpd/perl/lond</target>
  <categoryname>script</categoryname>
- Line 556  It accepts and processes incoming reques
+ Line 982  It accepts and processes incoming reques
  on the network.  lond's functionality is self-contained in the sense
  that it does not reference (import, require, use) any other file
  described in this document.  There are only 15 subroutines in this
- script, however the <TT>make_new_child</TT> subroutine is quite
+ script, however the <tt>make_new_child</tt> subroutine is quite
  complex since it parses and responds about 29 different types of
  network requests (i.e. enc, ping, pong, ekey, load, auth, passwd,
  makeuser, home, update, unsub, sub, log, put, rolesput, get, eget,
- Line 565  tmpput, tmpget, and ls).
+ Line 991  tmpput, tmpget, and ls).
  </description>
  </file>
  <file>
+ <source>doc/man/lond.1</source>
+ <target dist='default'>usr/man/man1/lond.1</target>
+ <categoryname>doc</categoryname>
+ <description>man page for lond</description>
+ <build trigger='always run'>
+ loncom/build/pod2man.sh ../lond &gt; ../../doc/man/lond.1 &amp;&amp; \
+ echo 'manifying lond'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../loncom/lond
+ </dependencies>
+ </file>
+ <file>
+ <source>doc/scripts/lond.html</source>
+ <target dist='default'>home/httpd/html/adm/help/scripts/lond.html</target>
+ <categoryname>doc</categoryname>
+ <description>POD-derived page for lond</description>
+ <build trigger='always run'>
+ loncom/build/pod2html.sh ../lond &gt; ../../doc/scripts/lond.html &amp;&amp; \
+ echo 'pod2html lond'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../loncom/lond
+ </dependencies>
+ </file>
+ <file>
+ <source>loncom/cgi/loncron.pl</source>
+ <target dist='default'>home/httpd/cgi-bin/loncron.pl</target>
+ <categoryname>script</categoryname>
+ <description>CGI script that starts and pipes output of loncron</description>
+ </file>
+ <file>
  <source>loncom/loncron</source>
  <target dist='default'>home/httpd/perl/loncron</target>
  <categoryname>script</categoryname>
- Line 577  tmpput, tmpget, and ls).
+ Line 1037  tmpput, tmpget, and ls).
  <description>maintain secondary database of metadata</description>
  </file>
  <file>
+ <source>doc/man/lonsql.1</source>
+ <target dist='default'>usr/man/man1/lonsql.1</target>
+ <categoryname>doc</categoryname>
+ <description>man page for lonsql</description>
+ <build trigger='always run'>
+ loncom/build/pod2man.sh ../lonsql &gt; ../../doc/man/lonsql.1 &amp;&amp; \
+ echo 'manifying lonsql'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../loncom/lonsql
+ </dependencies>
+ </file>
+ <file>
+ <source>doc/scripts/lonsql.html</source>
+ <target dist='default'>home/httpd/html/adm/help/scripts/lonsql.html</target>
+ <categoryname>doc</categoryname>
+ <description>POD-derived page for lonsql</description>
+ <build trigger='always run'>
+ loncom/build/pod2html.sh ../lonsql &gt; ../../doc/scripts/lonsql.html &amp;&amp; \
+ echo 'pod2html lonsql'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../loncom/lonsql
+ </dependencies>
+ </file>
+ <file>
  <source>loncom/lcpasswd</source>
  <target dist='default'>home/httpd/perl/lcpasswd</target>
  <categoryname>setuid script</categoryname>
  <description>
- coordinates the system services and files in order to allow lond to change
+ Coordinates the system services and files in order to allow lond to change
- user passwords
+ user passwords.
+ </description>
+ <status>being updated</status>
+ </file>
+ <file>
+ <source>loncom/pwchange</source>
+ <target dist='default'>home/httpd/perl/pwchange</target>
+ <categoryname>setuid script</categoryname>
+ <description>
+ Allows www to change user passwords.
  </description>
+ <status>being updated</status>
  </file>
  <file>
  <source>loncom/lcuseradd</source>
  <target dist='default'>home/httpd/perl/lcuseradd</target>
  <categoryname>setuid script</categoryname>
  <description>
- coordinates the system services and files in order to allow lond to add a
+ Coordinates the system services and files in order to allow lond to add a
- new user
+ new user.
  </description>
+ <status>being updated</status>
+ </file>
+ <file>
+ <source>loncom/lchtmldir</source>
+ <target dist='default'>home/httpd/perl/lchtmldir</target>
+ <categoryname>setuid script</categoryname>
+ <description>
+ Manages the file system ramifications of adding author mode to a user.
+ If necessary a public_html diretory is added, permissions and ownership are
+ set according to the user's authentication mode.
+ </description>
+ <status>New file</status>
  </file>
  <file>
  <source>loncom/lcuserdel</source>
  <target dist='default'>home/httpd/perl/lcuserdel</target>
  <categoryname>setuid script</categoryname>
  <description>
- coordinates the system services and files in order to allow lond to delete a user
+ Coordinates the system services and files in order to allow lond to delete a
+ user.
  </description>
+ <status>deprecated</status>
  </file>
  <file>
  <source>loncom/lcnfson</source>
- Line 610  coordinates the system services and file
+ Line 1122  coordinates the system services and file
  coordinates the system services and files in order to allow lond to enable NFS
  for a user
  </description>
+ <status>deprecated</status>
  </file>
  <file>
  <source>loncom/lcnfsoff</source>
- Line 619  for a user
+ Line 1132  for a user
  coordinates the system services and files in order to allow lond to disable NFS
  for a user
  </description>
+ <status>deprecated</status>
+ </file>
+ <file>
+ <source>loncom/license/gpl.txt</source>
+ <target dist='default'>home/httpd/html/adm/gpl.txt</target>
+ <categoryname>interface file</categoryname>
+ <description>
+ GNU General Public License.  Long live the cause of freeware!
+ </description>
+ </file>
+ <file>
+ <source>loncom/license/about.html</source>
+ <target dist='default'>home/httpd/html/adm/about.html</target>
+ <categoryname>interface file</categoryname>
+ <description>
+ The "About" Page.
+ </description>
  </file>
  <file>
  <source>loncom/publisher/publisher.html</source>
- Line 630  resources, directories and underlying su
+ Line 1160  resources, directories and underlying su
  </description>
  </file>
  <file>
+ <source>loncom/html/adm/noidea.html</source>
+ <target dist='default'>home/httpd/html/adm/noidea.html</target>
+ <categoryname>interface file</categoryname>
+ <description>
+ Interface file for responding to improper page flipping.
+ </description>
+ </file>
+ <file>
+ <source>loncom/xml/physnet.sty</source>
+ <target dist='default'>home/httpd/html/res/adm/includes/physnet.sty</target>
+ <categoryname>static conf</categoryname>
+ <description>
+ The relevant conditions and metadata to attach to PhysNet-specific tags.
+ </description>
+ </file>
+ <file>
  <source>loncom/homework/lectureonline.sty</source>
- <target dist='default'>home/httpd/html/res/adm/includes/lectureonline.sty</target>
+ <target dist='default'>home/httpd/html/res/adm/includes/lectureonline.sty
+ </target>
  <categoryname>static conf</categoryname>
  <description>
  The relevant conditions and metadata to attach to LectureOnline-specific tags.
- Line 647  content.
+ Line 1194  content.
  </description>
  </file>
  <file>
+ <source>loncom/publisher/packages.tab</source>
+ <target dist='default'>home/httpd/lonTabs/packages.tab</target>
+ <categoryname>static conf</categoryname>
+ <description>
+ Parameter packages, so that assessments can publish parameter packages
+ needed, which are then expanded into individual parameters - allows to
+ retroactively add new parameters to already published assessments.
+ </description>
+ </file>
+ <file>
  <source>loncom/publisher/copyright.tab</source>
  <target dist='default'>home/httpd/html/res/adm/includes/copyright.tab</target>
- <categoryname>conf</categoryname>
+ <categoryname>static conf</categoryname>
  <description>
  Table which contains list of copyright possibilities for educational resources.
  </description>
- Line 664  combinations.
+ Line 1221  combinations.
  </description>
  </file>
  <file>
- <source></source>
- <target dist='default'></target>
- <categoryname></categoryname>
- <description></description>
- </file>
- <file>
  <source>loncom/publisher/addid.tab</source>
  <target dist='default'>home/httpd/lonTabs/addid.tab</target>
  <categoryname>static conf</categoryname>
- Line 678  Table which has hash data necessary for
+ Line 1229  Table which has hash data necessary for
  </description>
  </file>
  <file>
+ <source>rat/lonwrapper.pm</source>
+ <target dist='default'>home/httpd/lib/perl/Apache/lonwrapper.pm</target>
+ <categoryname>handler</categoryname>
+ <description>
+ Wrapper for external and binary files as standalone resources.
+ Edit handler for rat maps; TeX content handler.
+ </description>
+ <status>works/unverified</status>
+ </file>
+ <file>
+ <source>loncom/publisher/loncfile.pm</source>
+ <target dist='default'>home/httpd/lib/perl/Apache/loncfile.pm</target>
+ <categoryname>handler</categoryname>
+ <description>
+ Provides web-based functionality for file copy, rename, mkdir, etc, in the
+ construction space menu.
+ </description>
+ <status>works/unverified</status>
+ </file>
+ <file>
  <source>loncom/interface/lonstatistics.pm</source>
  <target dist='default'>home/httpd/lib/perl/Apache/lonstatistics.pm</target>
  <categoryname>handler</categoryname>
- Line 705  Handler to upload files through browser
+ Line 1276  Handler to upload files through browser
  <status>works/unverified</status>
  </file>
  <file>
+ <source>doc/man/Apache__lonupload.3</source>
+ <target dist='default'>usr/man/man3/Apache::lonupload.3</target>
+ <categoryname>doc</categoryname>
+ <description>man page for lonupload.pm</description>
+ <build trigger='always run'>
+ loncom/build/pod2man.sh ../publisher/lonupload.pm &gt; \
+ ../../doc/man/Apache__lonupload.3 &amp;&amp; echo 'manifying lonupload.pm'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../loncom/publisher/lonupload.pm
+ </dependencies>
+ </file>
+ <file>
+ <source>doc/lib/perl/Apache/lonupload.html</source>
+ <target dist='default'>home/httpd/html/adm/help/lib/perl/Apache/lonupload.html
+ </target>
+ <categoryname>doc</categoryname>
+ <description>POD-derived page for lonupload.pm</description>
+ <build trigger='always run'>
+ loncom/build/pod2html.sh ../publisher/lonupload.pm &gt; \
+ ../../doc/lib/perl/Apache/lonupload.html &amp;&amp; \
+ echo 'pod2html lonupload.pm'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../loncom/publisher/lonupload.pm
+ </dependencies>
+ </file>
+ <file>
  <source>loncom/homework/essayresponse.pm</source>
  <target dist='default'>home/httpd/lib/perl/Apache/essayresponse.pm</target>
  <categoryname>handler</categoryname>
- Line 714  Handler to evaluate essay (ungraded) sty
+ Line 1315  Handler to evaluate essay (ungraded) sty
  <status>works/unverified</status>
  </file>
  <file>
+ <source>loncom/homework/externalresponse.pm</source>
+ <target dist='default'>home/httpd/lib/perl/Apache/externalresponse.pm</target>
+ <categoryname>handler</categoryname>
+ <description>
+ Handler to evaluate externally graded responses.
+ </description>
+ <status>works/unverified</status>
+ </file>
+ <file>
+ <source>loncom/homework/loncapagrade.pm</source>
+ <target dist='default'>home/httpd/lib/perl/Apache/loncapagrade.pm</target>
+ <categoryname>handler</categoryname>
+ <description>
+ Holds results and defines
+ tag handlers needed by externalresponse.pm
+ </description>
+ <status>works/unverified</status>
+ </file>
+ <file>
  <source>loncom/publisher/lonpubdir.pm</source>
  <target dist='default'>home/httpd/lib/perl/Apache/lonpubdir.pm</target>
  <categoryname>handler</categoryname>
- Line 722  Handler to publish directories.
+ Line 1342  Handler to publish directories.
  </description>
  </file>
  <file>
+ <source>doc/man/Apache__lonpubdir.3</source>
+ <target dist='default'>usr/man/man3/Apache::lonpubdir.3</target>
+ <categoryname>doc</categoryname>
+ <description>man page for lonpubdir.pm</description>
+ <build trigger='always run'>
+ loncom/build/pod2man.sh ../publisher/lonpubdir.pm &gt; \
+ ../../doc/man/Apache__lonpubdir.3 &amp;&amp; echo 'manifying lonpubdir.pm'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../loncom/lonnet/perl/lonnet.pm
+ </dependencies>
+ </file>
+ <file>
+ <source>doc/lib/perl/Apache/lonpubdir.html</source>
+ <target dist='default'>home/httpd/html/adm/help/lib/perl/Apache/lonpubdir.html
+ </target>
+ <categoryname>doc</categoryname>
+ <description>POD-derived page for lonpubdir.pm</description>
+ <build trigger='always run'>
+ loncom/build/pod2html.sh ../publisher/lonpubdir.pm &gt; \
+ ../../doc/lib/perl/Apache/lonpubdir.html &amp;&amp; \
+ echo 'pod2html lonpubdir.pm'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../loncom/publisher/lonpubdir.pm
+ </dependencies>
+ </file>
+ <file>
  <source>loncom/publisher/lonretrieve.pm</source>
  <target dist='default'>home/httpd/lib/perl/Apache/lonretrieve.pm</target>
  <categoryname>handler</categoryname>
- Line 731  Handler to retrieve old versions from re
+ Line 1381  Handler to retrieve old versions from re
  <status>works/unverified</status>
  </file>
  <file>
+ <source>doc/man/Apache__lonretrieve.3</source>
+ <target dist='default'>usr/man/man3/Apache::lonretrieve.3</target>
+ <categoryname>doc</categoryname>
+ <description>man page for lonretrieve.pm</description>
+ <build trigger='always run'>
+ loncom/build/pod2man.sh ../publisher/lonretrieve.pm &gt; \
+ ../../doc/man/Apache__lonretrieve.3 &amp;&amp; echo 'manifying lonretrieve.pm'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../loncom/publisher/lonretrieve.pm
+ </dependencies>
+ </file>
+ <file>
+ <source>doc/lib/perl/Apache/lonretrieve.html</source>
+ <target dist='default'>
+ home/httpd/html/adm/help/lib/perl/Apache/lonretrieve.html
+ </target>
+ <categoryname>doc</categoryname>
+ <description>POD-derived page for lonretrieve.pm</description>
+ <build trigger='always run'>
+ loncom/build/pod2html.sh ../publisher/lonretrieve.pm &gt; \
+ ../../doc/lib/perl/Apache/lonretrieve.html &amp;&amp; \
+ echo 'pod2html lonretrieve.pm'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../loncom/publisher/lonretrieve.pm
+ </dependencies>
+ </file>
+ <file>
  <source>loncom/homework/edit.pm</source>
  <target dist='default'>home/httpd/lib/perl/Apache/edit.pm</target>
  <categoryname>handler</categoryname>
- Line 739  Helper functions when in homework edit m
+ Line 1420  Helper functions when in homework edit m
  </description>
  </file>
  <file>
+ <source>doc/man/Apache__edit.3</source>
+ <target dist='default'>usr/man/man3/Apache::edit.3</target>
+ <categoryname>doc</categoryname>
+ <description>man page for edit.pm</description>
+ <build trigger='always run'>
+ loncom/build/pod2man.sh ../homework/edit.pm &gt; ../../doc/man/Apache__edit.3 &amp;&amp; \
+ echo 'manifying edit.pm'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../loncom/homework/edit.pm
+ </dependencies>
+ </file>
+ <file>
+ <source>doc/lib/perl/Apache/edit.html</source>
+ <target dist='default'>home/httpd/html/adm/help/lib/perl/Apache/edit.html
+ </target>
+ <categoryname>doc</categoryname>
+ <description>POD-derived page for edit.pm</description>
+ <build trigger='always run'>
+ loncom/build/pod2html.sh ../homework/edit.pm &gt; \
+ ../../doc/lib/perl/Apache/edit.html \
+ &amp;&amp; echo 'pod2html edit.pm'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../loncom/homework/edit.pm
+ </dependencies>
+ </file>
+ <file>
  <source>loncom/interface/lonmeta.pm</source>
  <target dist='default'>home/httpd/lib/perl/Apache/lonmeta.pm</target>
  <categoryname>handler</categoryname>
- Line 764  Handler to set resource parameters insid
+ Line 1475  Handler to set resource parameters insid
  <status>works/unverified</status>
  </file>
  <file>
- <source></source>
- <target dist='default'></target>
- <categoryname></categoryname>
- <description></description>
- </file>
- <file>
  <source>rat/lonsequence.pm</source>
  <target dist='default'>home/httpd/lib/perl/Apache/lonsequence.pm</target>
  <categoryname>handler</categoryname>
- Line 783  Handler for showing sequence objects of
+ Line 1488  Handler for showing sequence objects of
  <target dist='default'>home/httpd/lib/perl/Apache/loncreatecourse.pm</target>
  <categoryname>handler</categoryname>
  <description>
- Creates a new course and assigns course coordinator.
+ Allows domain coordinators to create new courses and assign course
+ coordinators.
  </description>
+ <status>works/unverified</status>
  </file>
  <file>
  <source>loncom/interface/loncreateuser.pm</source>
  <target dist='default'>home/httpd/lib/perl/Apache/loncreateuser.pm</target>
  <categoryname>handler</categoryname>
  <description>
- Creates a new user and/or changes user privileges
+ Allows users to within their own privileges create/edit users and give
+ them roles.
  </description>
  <status>works/unverified</status>
  </file>
- Line 809  Produces simple LectureOnline-like stude
+ Line 1517  Produces simple LectureOnline-like stude
  <categoryname>handler</categoryname>
  <description>
  Makes a table out of the previous attempts.  Inputs result_from_symbread,
- user, domain, home_server, course_id
+ user, domain, home_server, course_id.
  </description>
  <status>works/unverified</status>
  </file>
  <file>
+ <source>doc/man/Apache__loncommon.3</source>
+ <target dist='default'>usr/man/man3/Apache::loncommon.3</target>
+ <categoryname>doc</categoryname>
+ <description>man page for loncommon.pm</description>
+ <build trigger='always run'>
+ loncom/build/pod2man.sh ../interface/loncommon.pm &gt; \
+ ../../doc/man/Apache__loncommon.3 &amp;&amp; echo 'manifying loncommon.pm'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../loncom/interface/loncommon.pm
+ </dependencies>
+ </file>
+ <file>
+ <source>doc/lib/perl/Apache/loncommon.html</source>
+ <target dist='default'>home/httpd/html/adm/help/lib/perl/Apache/loncommon.html
+ </target>
+ <categoryname>doc</categoryname>
+ <description>POD-derived page for loncommon.pm</description>
+ <build trigger='always run'>
+ loncom/build/pod2html.sh ../interface/loncommon.pm &gt; \
+ ../../doc/lib/perl/Apache/loncommon.html &amp;&amp; \
+ echo 'pod2html loncommon.pm'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../loncom/interface/loncommon.pm
+ </dependencies>
+ </file>
+ <file>
  <source>loncom/homework/grades.pm</source>
  <target dist='default'>home/httpd/lib/perl/Apache/grades.pm</target>
  <categoryname>handler</categoryname>
- Line 832  Coordinates the response to clicking an
+ Line 1570  Coordinates the response to clicking an
  <source>loncom/homework/optionresponse.pm</source>
  <target dist='default'>home/httpd/lib/perl/Apache/optionresponse.pm</target>
  <categoryname>handler</categoryname>
- <description>Handles tags associated with showing a list of options</description>
+ <description>
+ Handles tags associated with showing a list of options.</description>
  </file>
  <file>
  <source>loncom/homework/outputtags.pm</source>
- Line 842  Coordinates the response to clicking an
+ Line 1581  Coordinates the response to clicking an
  Handles tags associated with output.  Seems to relate to due dates of the
  assignment.
  </description>
+ <status>works/unverified</status>
  </file>
  <file>
  <source>loncom/interface/lontest.pm</source>
- Line 850  assignment.
+ Line 1590  assignment.
  <description>
  Used for debugging and testing the LON-CAPA system.
  </description>
+ <status>works/unverified</status>
  </file>
  <file>
  <source>loncom/homework/radiobuttonresponse.pm</source>
- <target dist='default'>home/httpd/lib/perl/Apache/radiobuttonresponse.pm</target>
+ <target dist='default'>
+ home/httpd/lib/perl/Apache/radiobuttonresponse.pm</target>
  <categoryname>handler</categoryname>
  <description>
  Handles multiple-choice style responses.
  </description>
+ <status>works/unverified</status>
  </file>
  <file>
  <source>loncom/interface/lonassignments.pm</source>
- Line 866  Handles multiple-choice style responses.
+ Line 1609  Handles multiple-choice style responses.
  <description>
  Handles processing of assignments.
  </description>
+ <status>works/unverified</status>
  </file>
  <file>
  <source>loncom/interface/loncommunicate.pm</source>
  <target dist='default'>home/httpd/lib/perl/Apache/loncommunicate.pm</target>
  <categoryname>handler</categoryname>
- <description>Handles communication.</description>
+ <description>
+ Will be the access handler to email sending, as well as the planned
+ chatrooms, etc.
+ </description>
+ <status>works/unverified</status>
  </file>
  <file>
  <source>loncom/interface/lonerrorhandler.pm</source>
- Line 880  Handles processing of assignments.
+ Line 1628  Handles processing of assignments.
  <description>
  Handles errors.
  </description>
+ <status>works/unverified</status>
  </file>
  <file>
  <source>loncom/interface/lonevaluate.pm</source>
- Line 888  Handles errors.
+ Line 1637  Handles errors.
  <description>
  Handles evaluation.
  </description>
+ <status>works/unverified</status>
  </file>
  <file>
  <source>loncom/interface/lonfeedback.pm</source>
- Line 895  Handles evaluation.
+ Line 1645  Handles evaluation.
  <categoryname>handler</categoryname>
  <description>
  Handles feedback from students to instructors and system administrators.
+ Provides a screenshot of the current
+ resource, as well as previous attempts if the resource was a homework.
+ Used by lonmsg.pm.
  </description>
- </file>
+ <status>works/unverified</status>
- <file>
- <source>loncom/interface/lonfeedback.pm</source>
- <target dist='default'>home/httpd/lib/perl/Apache/lonfeedback.pm</target>
- <categoryname>handler</categoryname>
- <description>
- Handles feedback from students to instructors and system administrators.
- </description>
- </file>
- <file>
- <source>loncom/interface/lonmydesk.pm</source>
- <target dist='default'>home/httpd/lib/perl/Apache/lonmydesk.pm</target>
- <categoryname>handler</categoryname>
- <description>
- Unknown function.
- </description>
- </file>
- <file>
- <source></source>
- <target dist='default'></target>
- <categoryname></categoryname>
- <description></description>
  </file>
  <file>
  <source>loncom/interface/lonnavmaps.pm</source>
- Line 926  Unknown function.
+ Line 1658  Unknown function.
  <description>
  Handles navigational maps.
  </description>
- </file>
+ <status>works/unverified</status>
- <file>
- <source></source>
- <target dist='default'></target>
- <categoryname></categoryname>
- <description></description>
  </file>
  <file>
  <source>loncom/interface/lonpreferences.pm</source>
- Line 941  Handles navigational maps.
+ Line 1668  Handles navigational maps.
  Handles user preferences associated with customizing the online LON-CAPA
  educational environment.
  </description>
+ <status>works/unverified</status>
  </file>
  <file>
  <source>loncom/interface/lonprintout.pm</source>
- Line 949  educational environment.
+ Line 1677  educational environment.
  <description>
  Handles the production of printable files and resources.
  </description>
+ <status>works/unverified</status>
  </file>
  <file>
  <source>loncom/interface/lonsearchcat.pm</source>
- Line 957  Handles the production of printable file
+ Line 1686  Handles the production of printable file
  <description>
  Handles a searchable catalogue.
  </description>
+ <status>works/unverified</status>
  </file>
  <file>
- <source></source>
+ <source>doc/man/Apache__lonsearchcat.3</source>
- <target dist='default'></target>
+ <target dist='default'>usr/man/man3/Apache::lonsearchcat.3</target>
- <categoryname></categoryname>
+ <categoryname>doc</categoryname>
- <description></description>
+ <description>man page for lonsearchcat.pm</description>
+ <build trigger='always run'>
+ loncom/build/pod2man.sh ../interface/lonsearchcat.pm &gt; \
+ ../../doc/man/Apache__lonsearchcat.3 &amp;&amp; echo 'manifying lonsearchcat.pm'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../loncom/interface/lonsearchcat.pm
+ </dependencies>
+ </file>
+ <file>
+ <source>doc/lib/perl/Apache/lonsearchcat.html</source>
+ <target dist='default'>
+ home/httpd/html/adm/help/lib/perl/Apache/lonsearchcat.html
+ </target>
+ <categoryname>doc</categoryname>
+ <description>POD-derived page for lonsearchcat.pm</description>
+ <build trigger='always run'>
+ loncom/build/pod2html.sh ../interface/lonsearchcat.pm &gt; \
+ ../../doc/lib/perl/Apache/lonsearchcat.html &amp;&amp; \
+ echo 'pod2html lonsearchcat.pm'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../loncom/interface/lonsearchcat.pm
+ </dependencies>
  </file>
  <file>
  <source>loncom/interface/londropadd.pm</source>
  <target dist='default'>home/httpd/lib/perl/Apache/londropadd.pm</target>
  <categoryname>handler</categoryname>
  <description>
- Handler to drop and add students in courses.
+ Allows course coordinators to upload courselists in different formats, and
+ automatically create users (if they do not exist already), assign them the
+ role of student in a course, and add them to the classlist.
  </description>
+ <status>works/unverified</status>
  </file>
  <file>
  <source>loncom/interface/lonmsg.pm</source>
  <target dist='default'>home/httpd/lib/perl/Apache/lonmsg.pm</target>
  <categoryname>handler</categoryname>
  <description>
- Routines for messaging.
+ lonmsg.pm has several functions to send and receive internal messages.
+ author_res_msg - send message to resource author.
+ user_crit_msg - send a critical message to a user. A critical message
+ will require acknowledgment by the recipient and the sender will be notified.
+ user_crit_received - routine to trigger acknowledgment.
+ statuschange - change the status of a message (read, replied, forwarded, etc).
+ The handler also displays messages, has routines to reply, etc.
  </description>
+ <status>works/unverified</status>
  </file>
  <file>
  <source>loncom/homework/hint.pm</source>
- Line 988  Routines for messaging.
+ Line 1753  Routines for messaging.
  This handler coordinates the delivery of hints to students working on LON-CAPA
  problems and assignments.
  </description>
+ <status>works/unverified</status>
  </file>
  <file>
  <source>loncom/interface/lonspreadsheet.pm</source>
  <target dist='default'>home/httpd/lib/perl/Apache/lonspreadsheet.pm</target>
  <categoryname>handler</categoryname>
  <description>
- Spreadsheet/Grades Display Handler
+ Spreadsheets are completely web-based.
+ They exist on the level of a whole course, a student, and individual
+ assessments.
  </description>
+ <status>works/unverified</status>
  </file>
  <file>
  <source>loncom/interface/lonparmset.pm</source>
- Line 1004  Spreadsheet/Grades Display Handler
+ Line 1773  Spreadsheet/Grades Display Handler
  <description>
  Handler to resolve ambiguous file locations
  </description>
+ <status>works/unverified</status>
+ </file>
+ <file>
+ <source>doc/man/Apache__lonparmset.3</source>
+ <target dist='default'>usr/man/man3/Apache::lonparmset.3</target>
+ <categoryname>doc</categoryname>
+ <description>man page for lonparmset.pm</description>
+ <build trigger='always run'>
+ loncom/build/pod2man.sh ../interface/lonparmset.pm &gt; \
+ ../../doc/man/Apache__lonparmset.3 &amp;&amp; echo 'manifying lonparmset.pm'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../loncom/interface/lonparmset.pm
+ </dependencies>
+ </file>
+ <file>
+ <source>doc/lib/perl/Apache/lonparmset.html</source>
+ <target dist='default'>home/httpd/html/adm/help/lib/perl/Apache/lonparmset.html
+ </target>
+ <categoryname>doc</categoryname>
+ <description>POD-derived page for lonparmset.pm</description>
+ <build trigger='always run'>
+ loncom/build/pod2html.sh ../interface/lonparmset.pm &gt; \
+ ../../doc/lib/perl/Apache/lonparmset.html &amp;&amp; \
+ echo 'pod2html lonparmset.pm'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../loncom/interface/lonparmset.pm
+ </dependencies>
  </file>
  <file>
  <source>loncom/publisher/lonconstruct.pm</source>
- Line 1012  Handler to resolve ambiguous file locati
+ Line 1812  Handler to resolve ambiguous file locati
  <description>
  Page wrapper for handling construction space.
  </description>
+ <status>works/unverified</status>
  </file>
  <file>
  <source>loncom/publisher/lonpublisher.pm</source>
- Line 1021  Page wrapper for handling construction s
+ Line 1822  Page wrapper for handling construction s
  Publishes an LON-CAPA educational resource complete with metadata
  (authorship, language, copyright, creation date, etc).
  </description>
+ <status>works/unverified</status>
+ </file>
+ <file>
+ <source>doc/man/Apache__lonpublisher.3</source>
+ <target dist='default'>usr/man/man3/Apache::lonpublisher.3</target>
+ <categoryname>doc</categoryname>
+ <description>man page for lonpublisher.pm</description>
+ <build trigger='always run'>
+ loncom/build/pod2man.sh ../publisher/lonpublisher.pm &gt; \
+ ../../doc/man/Apache__lonpublisher.3 &amp;&amp; echo 'manifying lonpublisher.pm'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../loncom/publisher/lonpublisher.pm
+ </dependencies>
+ </file>
+ <file>
+ <source>doc/lib/perl/Apache/lonpublisher.html</source>
+ <target dist='default'>
+ home/httpd/html/adm/help/lib/perl/Apache/lonpublisher.html
+ </target>
+ <categoryname>doc</categoryname>
+ <description>POD-derived page for lonpublisher.pm</description>
+ <build trigger='always run'>
+ loncom/build/pod2html.sh ../publisher/lonpublisher.pm &gt; \
+ ../../doc/lib/perl/Apache/lonpublisher.html &amp;&amp; \
+ echo 'pod2html lonpublisher.pm'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../loncom/publisher/lonpublisher.pm
+ </dependencies>
  </file>
  <file>
  <source>loncom/interface/lonmenu.pm</source>
- Line 1029  Publishes an LON-CAPA educational resour
+ Line 1862  Publishes an LON-CAPA educational resour
  <description>
  Has routines which control the remote control.
  </description>
+ <status>works/unverified</status>
  </file>
  <file>
  <source>rat/lonpageflip.pm</source>
  <target dist='default'>home/httpd/lib/perl/Apache/lonpageflip.pm</target>
  <categoryname>handler</categoryname>
  <description>Deals with forward, backward, and other page flips.</description>
+ <status>works/unverified</status>
  </file>
  <file>
  <source>rat/lonratedt.pm</source>
- Line 1043  Has routines which control the remote co
+ Line 1878  Has routines which control the remote co
  <description>
  Builds up frame set and loads in the right thing.
  </description>
+ <status>works/unverified</status>
  </file>
  <file>
  <source>loncom/html/res/adm/pages/homeworkmenu.html</source>
- Line 1051  Builds up frame set and loads in the rig
+ Line 1887  Builds up frame set and loads in the rig
  <description>
  Homework remote control.
  </description>
+ <status>works/unverified</status>
  </file>
  <file>
  <source>loncom/html/res/adm/pages/annotator/admannotations.pm</source>
  <target dist='default'>home/httpd/lib/perl/Apache/admannotations.pm</target>
  <categoryname>handler</categoryname>
  <description>
- This will take annotations and then plug them into a page
+ This will take annotations and then plug them into a page.
  </description>
+ <status>works/unverified</status>
  </file>
  <file>
  <source>loncom/html/res/adm/pages/bookmarkmenu/admbookmarks.pm</source>
- Line 1066  This will take annotations and then plug
+ Line 1904  This will take annotations and then plug
  <categoryname>handler</categoryname>
  <description>
  This will take bookmarks and get/write/display them for the LON-CAPA user
- interface
+ interface.
  </description>
+ <status>works/unverified</status>
  </file>
  <file>
  <source>rat/lonratsrv.pm</source>
  <target dist='default'>home/httpd/lib/perl/Apache/lonratsrv.pm</target>
  <categoryname>handler</categoryname>
  <description>
- Handler tat takes output from RAT and stores it on disk.  Handles the upper hidden
+ Handler that takes output from RAT and stores it on disk.  Handles the upper
- frame of the added window that comes up in RAT.   (3 frames come up in RAT server,
+ hidden frame of the added window that comes up in RAT.   (3 frames come up in
- code, and output.  This module handles server connection.)
+ RAT server, code, and output.  This module handles server connection.)
  </description>
+ <status>works/unverified</status>
  </file>
  <file>
  <source>rat/lonpage.pm</source>
- Line 1086  code, and output.  This module handles s
+ Line 1926  code, and output.  This module handles s
  <description>
  bundles pages into one page
  </description>
+ <status>works/unverified</status>
+ </file>
+ <file>
+ <source>doc/man/Apache__lonpage.3</source>
+ <target dist='default'>usr/man/man3/Apache::lonpage.3</target>
+ <categoryname>doc</categoryname>
+ <description>man page for lonpage.pm</description>
+ <build trigger='always run'>
+ loncom/build/pod2man.sh ../../rat/lonpage.pm &gt; \
+ ../../doc/man/Apache__lonpage.3 &amp;&amp; echo 'manifying lonpage.pm'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../rat/lonpage.pm
+ </dependencies>
+ </file>
+ <file>
+ <source>doc/lib/perl/Apache/lonpage.html</source>
+ <target dist='default'>home/httpd/html/adm/help/lib/perl/Apache/lonpage.html
+ </target>
+ <categoryname>doc</categoryname>
+ <description>POD-derived page for lonnet.pm</description>
+ <build trigger='always run'>
+ loncom/build/pod2html.sh ../../rat/lonpage.pm &gt; \
+ ../../doc/lib/perl/Apache/lonpage.html &amp;&amp; echo 'pod2html lonpage.pm'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../rat/lonpage.pm
+ </dependencies>
  </file>
  <file>
  <source>rat/lonuserstate.pm</source>
  <target dist='default'>home/httpd/lib/perl/Apache/lonuserstate.pm</target>
  <categoryname>handler</categoryname>
  <description>
- compile course into binary data structure (in loncom/rat)
+ compile course into binary data structure
  </description>
+ <status>works/unverified</status>
+ </file>
+ <file>
+ <source>doc/man/Apache__lonuserstate.3</source>
+ <target dist='default'>usr/man/man3/Apache::lonuserstate.3</target>
+ <categoryname>doc</categoryname>
+ <description>man page for lonnet.pm</description>
+ <build trigger='always run'>
+ loncom/build/pod2man.sh ../../rat/lonuserstate.pm &gt; \
+ ../../doc/man/Apache__lonuserstate.3 &amp;&amp; echo 'manifying lonuserstate.pm'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../rat/lonuserstate.pm
+ </dependencies>
+ </file>
+ <file>
+ <source>doc/lib/perl/Apache/lonuserstate.html</source>
+ <target dist='default'>
+ home/httpd/html/adm/help/lib/perl/Apache/lonuserstate.html
+ </target>
+ <categoryname>doc</categoryname>
+ <description>POD-derived page for lonuserstate.pm</description>
+ <build trigger='always run'>
+ loncom/build/pod2html.sh ../../rat/lonuserstate.pm &gt; \
+ ../../doc/lib/perl/Apache/lonuserstate.html &amp;&amp; \
+ echo 'pod2html lonuserstate.pm'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../rat/lonuserstate.pm
+ </dependencies>
  </file>
  <file>
  <source>loncom/xml/lontex.pm</source>
  <target dist='default'>home/httpd/lib/perl/Apache/lontex.pm</target>
  <categoryname>handler</categoryname>
  <description>
- Handler for tex files (somewhere in modules)
+ Handler for tex files
  </description>
+ <status>works/unverified</status>
  </file>
  <file>
  <source>loncom/xml/lontexconvert.pm</source>
- Line 1110  Handler for tex files (somewhere in modu
+ Line 2013  Handler for tex files (somewhere in modu
  <description>
  Access to tth/ttm
  </description>
+ <status>works/unverified</status>
  </file>
  <file>
  <source>loncom/xml/lonxml.pm</source>
- Line 1118  Access to tth/ttm
+ Line 2022  Access to tth/ttm
  <description>
  XML Parsing Module
  </description>
+ <status>works/unverified</status>
+ </file>
+ <file>
+ <source>loncom/xml/lonplot.pm</source>
+ <target dist='default'>home/httpd/lib/perl/Apache/lonplot.pm</target>
+ <categoryname>handler</categoryname>
+ <description>
+ XML-based plotter of graphs
+ </description>
+ <status>works/unverified</status>
  </file>
  <file>
  <source>loncom/xml/style.pm</source>
- Line 1126  XML Parsing Module
+ Line 2040  XML Parsing Module
  <description>
  Style Parsing Module
  </description>
+ <status>works/unverified</status>
  </file>
  <file>
  <source>loncom/xml/londefdef.pm</source>
- Line 1134  Style Parsing Module
+ Line 2049  Style Parsing Module
  <description>
  Tags Default Definition Module
  </description>
+ <status>works/unverified</status>
  </file>
  <file>
  <source>loncom/xml/run.pm</source>
- Line 1142  Tags Default Definition Module
+ Line 2058  Tags Default Definition Module
  <description>
  used to prevent poorly written problems from causing lingering after effects
  </description>
+ <status>works/unverified</status>
  </file>
  <file>
  <source>loncom/xml/scripttag.pm</source>
- Line 1151  used to prevent poorly written problems
+ Line 2068  used to prevent poorly written problems
  implements &lt;script&gt;, &lt;scriptlib&gt;, &lt;parserlib&gt;, and
  &lt;import&gt;
  </description>
+ <status>works/unverified</status>
+ </file>
+ <file>
+ <source>loncom/homework/randomlabel.pm</source>
+ <target dist='default'>home/httpd/lib/perl/Apache/randomlabel.pm</target>
+ <categoryname>handler</categoryname>
+ <description>
+ Interface for producing applet code which randomizes the labelling of an
+ image.
+ </description>
  </file>
  <file>
  <source>loncom/homework/lonhomework.pm</source>
  <target dist='default'>home/httpd/lib/perl/Apache/lonhomework.pm</target>
  <categoryname>handler</categoryname>
- <description>handler</description>
+ <description>
+ handles requests for output, evaluation, and alteration of a homework resource
+ </description>
+ <status>works/unverified</status>
  </file>
  <file>
  <source>loncom/homework/inputtags.pm</source>
- Line 1165  implements &lt;script&gt;, &lt;scriptlib
+ Line 2095  implements &lt;script&gt;, &lt;scriptlib
  <description>
  produces HTML input tags (&lt;INPUT&gt;) for rendering homework resources
  </description>
+ <status>works/unverified</status>
  </file>
  <file>
  <source>loncom/homework/structuretags.pm</source>
  <target dist='default'>home/httpd/lib/perl/Apache/structuretags.pm</target>
  <categoryname>handler</categoryname>
  <description>
- produces HTML tags necessary for structuring the presentation of homework resources
+ produces HTML tags necessary for structuring the presentation of homework
+ resources
  </description>
+ <status>works/unverified</status>
  </file>
  <file>
  <source>loncom/homework/response.pm</source>
  <target dist='default'>home/httpd/lib/perl/Apache/response.pm</target>
  <categoryname>handler</categoryname>
  <description>
- defines different types of responses given to student as well as syntax for producing response values
+ defines different types of responses given to student as well as syntax for
+ producing response values
  </description>
+ <status>works/unverified</status>
  </file>
  <file>
  <source>loncom/homework/caparesponse/caparesponse.pm</source>
- Line 1189  defines different types of responses giv
+ Line 2124  defines different types of responses giv
  <description>
  handles request to the CAPA homework processing engine
  </description>
+ <status>works/unverified</status>
+ </file>
+ <file>
+ <source>loncom/xml/Safe.pm</source>
+ <target dist='default'>home/httpd/lib/perl/Safe.pm</target>
+ <categoryname>handler</categoryname>
+ <description>
+ Meant to safely substitute for CPAN version of Safe.
+ Allows for safely executing embedded perl comands in
+ a way that does not threaten the operating system.
+ </description>
+ <status>works/unverified</status>
+ </file>
+ <file>
+ <source>loncom/auth/localauth.pm</source>
+ <target dist='default'>home/httpd/lib/perl/localauth.pm</target>
+ <categoryname>handler</categoryname>
+ <description>
+ Local authentication mechanism (meant to be customized).
+ </description>
+ <status>works/unverified</status>
  </file>
  <file>
  <source>loncom/auth/lonacc.pm</source>
- Line 1200  handles request to the CAPA homework pro
+ Line 2156  handles request to the CAPA homework pro
  functions (e.g. roles, logout, annotations, and bookmarks) as well
  as coordinating access to educational resources.
  </description>
+ <status>works/unverified</status>
+ </file>
+ <file>
+ <source>doc/man/Apache__lonacc.3</source>
+ <target dist='default'>usr/man/man3/Apache::lonacc.3</target>
+ <categoryname>doc</categoryname>
+ <description>man page for lonacc.pm</description>
+ <build trigger='always run'>
+ loncom/build/pod2man.sh ../auth/lonacc.pm &gt; \
+ ../../doc/man/Apache__lonacc.3 &amp;&amp; echo 'manifying lonacc.pm'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../loncom/auth/lonacc.pm
+ </dependencies>
+ </file>
+ <file>
+ <source>doc/lib/perl/Apache/lonacc.html</source>
+ <target dist='default'>
+ home/httpd/html/adm/help/lib/perl/Apache/lonacc.html</target>
+ <categoryname>doc</categoryname>
+ <description>POD-derived page for lonacc.pm</description>
+ <build trigger='always run'>
+ loncom/build/pod2html.sh ../auth/lonacc.pm &gt; \
+ ../../doc/lib/perl/Apache/lonacc.html &amp;&amp; echo 'pod2html lonacc.pm'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../loncom/auth/lonacc.pm
+ </dependencies>
  </file>
  <file>
  <source>loncom/auth/lonracc.pm</source>
- Line 1208  as coordinating access to educational re
+ Line 2194  as coordinating access to educational re
  <description>
  access handler for file transfers
  </description>
+ <status>works/unverified</status>
+ </file>
+ <file>
+ <source>doc/man/Apache__lonracc.3</source>
+ <target dist='default'>usr/man/man3/Apache::lonracc.3</target>
+ <categoryname>doc</categoryname>
+ <description>man page for lonracc.pm</description>
+ <build trigger='always run'>
+ loncom/build/pod2man.sh ../auth/lonracc.pm &gt; \
+ ../../doc/man/Apache__lonracc.3 &amp;&amp; echo 'manifying lonracc.pm'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../loncom/auth/lonracc.pm
+ </dependencies>
+ </file>
+ <file>
+ <source>doc/lib/perl/Apache/lonracc.html</source>
+ <target dist='default'>home/httpd/html/adm/help/lib/perl/Apache/lonracc.html
+ </target>
+ <categoryname>doc</categoryname>
+ <description>POD-derived page for lonracc.pm</description>
+ <build trigger='always run'>
+ loncom/build/pod2html.sh ../auth/lonracc.pm &gt; \
+ ../../doc/lib/perl/Apache/lonracc.html &amp;&amp; echo 'pod2html lonracc.pm'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../loncom/auth/lonracc.pm
+ </dependencies>
  </file>
  <file>
  <source>loncom/auth/loncacc.pm</source>
- Line 1225  If the cookie handle is valid, status is
+ Line 2241  If the cookie handle is valid, status is
  for the "priv"-type access, the resource is delivered by the
  <tt>lonconstruct</tt> module).
  </description>
+ <status>works/unverified</status>
+ </file>
+ <file>
+ <source>doc/man/Apache__loncacc.3</source>
+ <target dist='default'>usr/man/man3/Apache::loncacc.3</target>
+ <categoryname>doc</categoryname>
+ <description>man page for loncacc.pm</description>
+ <build trigger='always run'>
+ loncom/build/pod2man.sh ../auth/loncacc.pm &gt; ../../doc/man/Apache__loncacc.3 \
+ &amp;&amp; echo 'manifying loncacc.pm'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../loncom/auth/loncacc.pm
+ </dependencies>
+ </file>
+ <file>
+ <source>doc/lib/perl/Apache/loncacc.html</source>
+ <target dist='default'>home/httpd/html/adm/help/lib/perl/Apache/loncacc.html
+ </target>
+ <categoryname>doc</categoryname>
+ <description>POD-derived page for loncacc.pm</description>
+ <build trigger='always run'>
+ loncom/build/pod2html.sh ../auth/loncacc.pm &gt; \
+ ../../doc/lib/perl/Apache/loncacc.html &amp;&amp; echo 'pod2html loncacc.pm'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../loncom/auth/loncacc.pm
+ </dependencies>
  </file>
  <file>
  <source>loncom/auth/lonauth.pm</source>
  <target dist='default'>home/httpd/lib/perl/Apache/lonauth.pm</target>
  <categoryname>handler</categoryname>
  <description>authenticate, set up session environment</description>
+ <status>works/unverified</status>
  </file>
  <file>
  <source>loncom/auth/lonlogin.pm</source>
  <target dist='default'>home/httpd/lib/perl/Apache/lonlogin.pm</target>
  <categoryname>handler</categoryname>
  <description>login screen</description>
+ <status>works/unverified</status>
  </file>
  <file>
  <source>loncom/auth/lonlogout.pm</source>
  <target dist='default'>home/httpd/lib/perl/Apache/lonlogout.pm</target>
  <categoryname>handler</categoryname>
  <description>logout</description>
+ <status>works/unverified</status>
  </file>
  <file>
  <source>loncom/lonnet/perl/lonrep.pm</source>
- Line 1265  class.
+ Line 2314  class.
  </description>
  </file>
  <file>
+ <source>doc/man/Apache__lonroles.3</source>
+ <target dist='default'>usr/man/man3/Apache::lonroles.3</target>
+ <categoryname>doc</categoryname>
+ <description>man page for lonroles.pm</description>
+ <build trigger='always run'>
+ loncom/build/pod2man.sh ../auth/lonroles.pm &gt; \
+ ../../doc/man/Apache__lonroles.3 &amp;&amp; echo 'manifying lonroles.pm'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../loncom/auth/lonroles.pm
+ </dependencies>
+ </file>
+ <file>
+ <source>doc/lib/perl/Apache/lonroles.html</source>
+ <target dist='default'>home/httpd/html/adm/help/lib/perl/Apache/lonroles.html
+ </target>
+ <categoryname>doc</categoryname>
+ <description>POD-derived page for lonroles.pm</description>
+ <build trigger='always run'>
+ loncom/build/pod2html.sh ../auth/lonroles.pm &gt; \
+ ../../doc/lib/perl/Apache/lonroles.html &amp;&amp; echo 'pod2html lonroles.pm'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../loncom/auth/lonroles.pm
+ </dependencies>
+ </file>
+ <file>
  <source>loncom/interface/lonindexer.pm</source>
  <target dist='default'>home/httpd/lib/perl/Apache/lonindexer.pm</target>
  <categoryname>handler</categoryname>
  <description>
  cross server filesystem browser
  </description>
+ <status>works/unverified</status>
+ </file>
+ <file>
+ <source>doc/man/Apache__lonindexer.3</source>
+ <target dist='default'>usr/man/man3/Apache::lonindexer.3</target>
+ <categoryname>doc</categoryname>
+ <description>man page for lonindexer.pm</description>
+ <build trigger='always run'>
+ loncom/build/pod2man.sh ../interface/lonindexer.pm &gt; \
+ ../../doc/man/Apache__lonindexer.3 &amp;&amp; echo 'manifying lonindexer.pm'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../loncom/interface/lonindexer.pm
+ </dependencies>
+ </file>
+ <file>
+ <source>doc/lib/perl/Apache/lonindexer.html</source>
+ <target dist='default'>home/httpd/html/adm/help/lib/perl/Apache/lonindexer.html
+ </target>
+ <categoryname>doc</categoryname>
+ <description>POD-derived page for lonindexer.pm</description>
+ <build trigger='always run'>
+ loncom/build/pod2html.sh ../interface/lonindexer.pm &gt; \
+ ../../doc/lib/perl/Apache/lonindexer.html &amp;&amp; \
+ echo 'pod2html lonindexer.pm'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../loncom/interface/lonindexer.pm
+ </dependencies>
+ </file>
+ <file>
+ <source>loncom/interface/groupsort.pm</source>
+ <target dist='default'>home/httpd/lib/perl/Apache/groupsort.pm</target>
+ <categoryname>handler</categoryname>
+ <description>
+ Implements a second phase of importing multiple resources into the RAT.
+ Allows for reordering the sequence of resources.
+ </description>
+ <status>works/unverified</status>
  </file>
  <file>
  <source>loncom/lonnet/perl/lonnet.pm</source>
- Line 1288  educational resources (course descriptio
+ Line 2407  educational resources (course descriptio
  url hashing (to assign roles on a url basis), and translating abbreviated
  symbols to and from more descriptive phrases or explanations.
  </description>
+ <status>works/unverified</status>
+ </file>
+ <file>
+ <source>doc/man/Apache__lonnet.3</source>
+ <target dist='default'>usr/man/man3/Apache::lonnet.3</target>
+ <categoryname>doc</categoryname>
+ <description>man page for lonnet.pm</description>
+ <build trigger='always run'>
+ loncom/build/pod2man.sh ../lonnet/perl/lonnet.pm &gt; \
+ ../../doc/man/Apache__lonnet.3 &amp;&amp; echo 'manifying lonnet.pm'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../loncom/lonnet/perl/lonnet.pm
+ </dependencies>
+ </file>
+ <file>
+ <source>doc/lib/perl/Apache/lonnet.html</source>
+ <target dist='default'>home/httpd/html/adm/help/lib/perl/Apache/lonnet.html
+ </target>
+ <categoryname>doc</categoryname>
+ <description>POD-derived page for lonnet.pm</description>
+ <build trigger='always run'>
+ loncom/build/pod2html.sh ../lonnet/perl/lonnet.pm &gt; \
+ ../../doc/lib/perl/Apache/lonnet.html &amp;&amp; echo 'pod2html lonnet.pm'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../loncom/lonnet/perl/lonnet.pm
+ </dependencies>
  </file>
  <file>
  <source>loncom/html/index.html</source>
- Line 1321  not present on the web server
+ Line 2470  not present on the web server
  <target dist='default'>home/httpd/html/adm/unauthorized.html</target>
  <categoryname>interface file</categoryname>
  <description>
- static html page that is shown when an attempt is made to access a document which is restricted based on
+ static html page that is shown when an attempt is made to access a document
- file or server configurations
+ which is restricted based on file or server configurations
+ </description>
+ </file>
+ <file>
+ <source>loncom/html/adm/help/searchcat.html</source>
+ <target dist='default'>home/httpd/html/adm/help/searchcat.html</target>
+ <categoryname>interface file</categoryname>
+ <description>
+ Help page for the search engine.
  </description>
  </file>
  <file>
- Line 1365  bumper
+ Line 2522  bumper
  A blank page with very minimal HTML structural elements.
  </description>
  </file>
+ <fileglob>
+ <glob>*.gif</glob>
+ <sourcedir>rat/images/</sourcedir>
+ <targetdir dist='default'>home/httpd/html/adm/rat/</targetdir>
+ <categoryname>graphic file</categoryname>
+ <description>
+ icons for providing a HTML-tabled view of a course map
+ </description>
+ <filenames>
+.1.dt.gif;
+.1.empty.gif;
+.1.ld.gif;
+.1.lr.gif;
+.1.rd.gif;
+.1.rl.gif;
+.1.td.gif;
+.1.tdrl.gif;
+.1.tl.gif;
+.1.tr.gif;
+.1.utd.gif;
+.2.ctd.gif;
+.2.dt.gif;
+.2.empty.gif;
+.2.ld.gif;
+.2.lr.gif;
+.2.lrd.gif;
+.2.lrtd.gif;
+.2.rd.gif;
+.2.rl.gif;
+.2.rld.gif;
+.2.rltd.gif;
+.2.rtd.gif;
+.2.rtdl.gif;
+.2.rtl.gif;
+.2.td.gif;
+.2.tdl.gif;
+.2.tdrl.gif;
+.2.tl.gif;
+.2.tr.gif;
+.2.utd.gif;
+.1.dt.gif;
+.1.empty.gif;
+.1.ld.gif;
+.1.lr.gif;
+.1.rd.gif;
+.1.rl.gif;
+.1.td.gif;
+.1.tdrl.gif;
+.1.tl.gif;
+.1.tr.gif;
+.2.dt.gif;
+.2.empty.gif;
+.2.ld.gif;
+.2.lr.gif;
+.2.lrd.gif;
+.2.lrt.gif;
+.2.rd.gif;
+.2.rl.gif;
+.2.rld.gif;
+.2.rlt.gif;
+.2.td.gif;
+.2.tdl.gif;
+.2.tdr.gif;
+.2.tdrl.gif;
+.2.tl.gif;
+.2.tr.gif;
+.2.url.gif;
+.2.utd.gif;
+ arrow.gif;
+ bdt.gif;
+ bempty.gif;
+ bld.gif;
+ blr.gif;
+ blrd.gif;
+ blrt.gif;
+ bottom.gif;
+ brd.gif;
+ brl.gif;
+ brld.gif;
+ brlt.gif;
+ btd.gif;
+ btdl.gif;
+ btdr.gif;
+ btdrl.gif;
+ btl.gif;
+ btr.gif;
+ burl.gif;
+ butd.gif;
+ condition.gif;
+ edit.gif;
+ finish.gif;
+ info.gif;
+ inscol.gif;
+ inscond.gif;
+ insres.gif;
+ insrow.gif;
+ left.gif;
+ middle.gif;
+ resource.gif;
+ right.gif;
+ sctd.gif;
+ sdt.gif;
+ sempty.gif;
+ sld.gif;
+ slr.gif;
+ slrd.gif;
+ slrtd.gif;
+ srd.gif;
+ srl.gif;
+ srld.gif;
+ srltd.gif;
+ srtd.gif;
+ srtdl.gif;
+ srtl.gif;
+ start.gif;
+ std.gif;
+ stdl.gif;
+ sutd.gif
+ </filenames>
+ </fileglob>
+ <fileglob>
+ <glob>*.*</glob>
+ <sourcedir>loncom/html/adm/lonKaputt/</sourcedir>
+ <targetdir dist='default'>home/httpd/html/adm/lonKaputt/</targetdir>
+ <categoryname>graphic file</categoryname>
+ <description>
+ icons to indicate an unexpected result
+ </description>
+ <filenames>
+ lonconstruct.gif;
+ lonlogo_broken.gif;
+ lonlogo_broken_tsp.gif;
+ lonlogo_broken.eps;
+ lonlogo_broken.jpg;
+ lonlogo_broken.mov
+ </filenames>
+ </fileglob>
+ <fileglob>
+ <glob>*.*</glob>
+ <sourcedir>loncom/html/adm/lonIcons/</sourcedir>
+ <targetdir dist='default'>home/httpd/html/adm/lonIcons/</targetdir>
+ <categoryname>graphic file</categoryname>
+ <description>
+ logos and general widget icons
+ </description>
+ <filenames>
+ SMETE_white.gif;
+ aboutlon.gif;
+ accessbutton.gif;
+ arrow_up.gif;
+ cab.gif;
+ cab_big.gif;
+ capapanel.gif;
+ class.gif;
+ class_big.gif;
+ dvi.gif;
+ dvi_big.gif;
+ eps.gif;
+ eps_big.gif;
+ exam.gif;
+ exam_big.gif;
+ fillbottom.gif;
+ fillleft.gif;
+ fillright.gif;
+ filltop.gif;
+ folder_closed.gif;
+ folder_opened.gif;
+ folder_pointer_closed.gif;
+ folder_pointer_opened.gif;
+ form.gif;
+ form_big.gif;
+ gif.gif;
+ gif_big.gif;
+ header.gif;
+ htm.gif;
+ html.gif;
+ html_big.gif;
+ jar.gif;
+ jar_big.gif;
+ jpg.gif;
+ jpg_big.gif;
+ latex.gif;
+ lite.gif;
+ liteani.gif;
+ litetext.gif;
+ lolpanel.gif;
+ lonanim.gif;
+ lonanimend.gif;
+ loncapalogo.gif;
+ lonhelplogos.gif;
+ lonhelptop.gif;
+ lonlogo.gif;
+ lonlogos.gif;
+ lowerleft.gif;
+ lowerright.gif;
+ meta.gif;
+ meta_big.gif;
+ mov.gif;
+ mov_big.gif;
+ move_up.gif;
+ move_down.gif;
+ page.gif;
+ page_big.gif;
+ pdf.gif;
+ pdf_big.gif;
+ png.gif;
+ png_big.gif;
+ problem.gif;
+ problem_big.gif;
+ ps.gif;
+ ps_big.gif;
+ quill.gif;
+ quiz.gif;
+ quiz_big.gif;
+ select.gif;
+ sequence.gif;
+ sequence_big.gif;
+ server.gif;
+ server_big.gif;
+ srvbad.gif;
+ srvempty.gif;
+ srvgood.gif;
+ srvhalf.gif;
+ srvnull.gif;
+ survey.gif;
+ survey_big.gif;
+ tex.gif;
+ tex_big.gif;
+ txt.gif;
+ txt_big.gif;
+ unknown.gif;
+ unknown_big.gif;
+ upperleft.gif;
+ upperright.gif;
+ user.gif;
+ user_big.gif;
+ userauthentication.gif;
+ wav.gif;
+ wav_big.gif;
+ white_space_20_22.gif;
+ whitespace1.gif;
+ whitespace10.gif;
+ whitespace2.gif;
+ whitespace3.gif;
+ whitespace4.gif;
+ whitespace5.gif;
+ whitespace6.gif;
+ whitespace7.gif;
+ whitespace8.gif;
+ whitespace9.gif;
+ xml.gif;
+ xml_big.gif;
+ zip.gif;
+ zip_big.gif
+ </filenames>
+ </fileglob>
+ <fileglob>
+ <glob>*.*</glob>
+ <sourcedir>loncom/html/adm/lonMisc/</sourcedir>
+ <targetdir dist='default'>home/httpd/html/adm/lonMisc/</targetdir>
+ <categoryname>graphic file</categoryname>
+ <description>
+ Miscellaneous resources.
+ </description>
+ <filenames>
+ authorfeed.gif;
+ bomb.gif;
+ cat_button.gif;
+ chat.gif;
+ eval_button.gif;
+ feedback.gif;
+ pprm_button.gif;
+ pgrd_button.gif;
+ subm_button.gif
+ </filenames>
+ </fileglob>
+ <file>
+ <source>loncom/xml/tth.pm</source>
+ <target dist='default'>usr/lib/perl5/site_perl/5.005/tth.pm</target>
+ <target dist='redhat7 redhat7.1'>usr/lib/perl5/site_perl/5.6.0/tth.pm</target>
+ <categoryname>system file</categoryname>
+ <description>
+ perl module for invoking functions specific to TeX-to-HTML conversion
+ </description>
+ <note>
+ Has the same dependencies and build process as tth.so.
+ Currently, only the tth.so file specifications invoke
+ the build process however.  A static version is checked into loncom/xml
+ and in this way is treated as though it isn't part of the tth build process.
+ </note>
+ <status>works/unverified</status>
+ </file>
  <file>
- <source></source>
+ <source>loncom/xml/LCParser.pm</source>
- <target dist='default'></target>
+ <target dist='default'>home/httpd/lib/perl/HTML/LCParser.pm</target>
- <categoryname></categoryname>
+ <categoryname>system file</categoryname>
  <description>
+ perl module for parsing HTML in a way that really works and is thoroughly
+ tested
+ </description>
+ <status>works/unverified</status>
+ </file>
+ <file>
+ <source>loncom/configuration/Configuration.pm</source>
+ <target dist='default'>home/httpd/lib/perl/LONCAPA/Configuration.pm</target>
+ <categoryname>system file</categoryname>
+ <description>
+ Configuration file reader (looks in /etc/httpd/conf/); accepts
+ a list of *.conf files to inspect for PerlSetVar key/value
+ entries.
  </description>
+ <status>works/unverified</status>
  </file>
  <file>
- <source></source>
+ <source>modules/TexConvert/tthperl/tth.so</source>
- <target dist='default'></target>
+ <target dist='default'>usr/lib/perl5/site_perl/5.005/tth.so</target>
- <categoryname></categoryname>
+ <target dist='redhat7 redhat7.1'>usr/lib/perl5/site_perl/5.6.0/tth.so</target>
+ <categoryname>system file</categoryname>
  <description>
+ shared library file for dynamic loading and unloading
  </description>
+ <note>
+ The source and file dependencies are not available to most
+ CVS users.  (You can safely rely on the existing binaries
+ present on your system... don't worry about warnings
+ related to this file during the build process.)
+ </note>
+ <build trigger='run if dependencies change'>
+ modules/TexConvert/tthperl/commands
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../tthdynamic/tthfunc.c;
+ ../ttmdynamic/ttmfunc.c
+ </dependencies>
  </file>
  <file>
- <source></source>
+ <source>loncom/homework/caparesponse/capa.pm</source>
- <target dist='default'></target>
+ <target dist='default'>usr/lib/perl5/site_perl/5.005/capa.pm</target>
- <categoryname></categoryname>
+ <target dist='redhat7 redhat7.1'>usr/lib/perl5/site_perl/5.6.0/capa.pm</target>
+ <categoryname>system file</categoryname>
  <description>
+ perl module for invoking functions specific to CAPA
  </description>
+ <buildlink>loncom/homework/caparesponse/capa.so</buildlink>
+ <note>
+ Has the same dependencies and build process as capa.so.
+ Currently, only the capa.so file specifications invoke
+ the build process however.
+ </note>
  </file>
  <file>
- <source></source>
+ <source>loncom/homework/caparesponse/capa.bs</source>
- <target dist='default'></target>
+ <target dist='default'>usr/lib/perl5/site_perl/5.005/capa.bs</target>
- <categoryname></categoryname>
+ <target dist='redhat7 redhat7.1'>usr/lib/perl5/site_perl/5.6.0/capa.bs</target>
+ <categoryname>system file</categoryname>
  <description>
+ bootstrap file associated with dynamic loading of this module on multiple
+ architectures
  </description>
+ <buildlink>loncom/homework/caparesponse/capa.so</buildlink>
+ <note>
+ Has the same dependencies and build process as capa.so.
+ Currently, only the capa.so file specifications invoke
+ the build process however.
+ </note>
  </file>
  <file>
- <source></source>
+ <source>loncom/homework/caparesponse/capa.so</source>
- <target dist='default'></target>
+ <target dist='default'>usr/lib/perl5/site_perl/5.005/capa.so</target>
- <categoryname></categoryname>
+ <target dist='redhat7 redhat7.1'>usr/lib/perl5/site_perl/5.6.0/capa.so</target>
+ <categoryname>system file</categoryname>
+ <description>
+ shared library file for dynamic loading and unloading
+ </description>
+ <build trigger='always run'>
+ loncom/homework/caparesponse/commands
+ </build>
+ <dependencies>
+ caparesponse.c;
+ caparesponse.pm;
+ README;
+ Makefile.PL;
+ capa.i;
+ commands;
+ ../../../CAPA/pProj/capaGrammarDef.y;
+ ../../../CAPA/pProj/capaFormula.y;
+ ../../../CAPA/pProj/capaLexerDef.flex;
+ ../../../CAPA/pProj/capaFunction.c;
+ ../../../CAPA/pProj/capaParserUtils.c;
+ ../../../CAPA/pProj/capaMapExpr.c;
+ ../../../CAPA/pProj/capaUnit.c;
+ ../../../CAPA/pProj/com.c;
+ ../../../CAPA/pProj/linpack.c;
+ ../../../CAPA/pProj/ranlib.c;
+ ../../../CAPA/pProj/capaCgiUtils.c;
+ ../../../CAPA/pProj/capaSubjective.c;
+ ../../../CAPA/pProj/capaRQO.c;
+ ../../../CAPA/pProj/capaFormulaLexer.c;
+ ../../../CAPA/pProj/capaCommon.c;
+ ../../../CAPA/pProj/capaCommon.h;
+ ../../../CAPA/pProj/ranlib.h;
+ ../../../CAPA/pProj/capaCGI.h;
+ ../../../CAPA/pProj/capaFunction.h;
+ ../../../CAPA/pProj/capaRQO.h;
+ ../../../CAPA/pProj/capaParser.h;
+ ../../../CAPA/pProj/lex_debug.h
+ </dependencies>
+ </file>
+ <fileglob>
+ <glob>*.ent</glob>
+ <sourcedir>loncom/MathML/</sourcedir>
+ <targetdir dist='default'>home/httpd/html/adm/MathML/</targetdir>
+ <categoryname>system file</categoryname>
+ <description>
+ xml files which assign unicode numbers to mathematical symbols using
+ &lt;! ENTITY... &gt; type syntax.
+ </description>
+ <filenames>
+ isoamsa.ent;
+ isoamsb.ent;
+ isoamsc.ent;
+ isoamsn.ent;
+ isoamso.ent;
+ isoamsr.ent;
+ isobox.ent;
+ isocyr1.ent;
+ isocyr2.ent;
+ isodia.ent;
+ isogrk1.ent;
+ isogrk2.ent;
+ isogrk3.ent;
+ isogrk4.ent;
+ isolat1.ent;
+ isolat2.ent;
+ isomfrk.ent;
+ isomopf.ent;
+ isomscr.ent;
+ isonum.ent;
+ isopub.ent;
+ isotech.ent;
+ mmlalias.ent;
+ mmlextra.ent
+ </filenames>
+ </fileglob>
+ <file>
+ <source>loncom/MathML/mathml.css</source>
+ <target dist='default'>home/httpd/html/adm/MathML/mathml.css</target>
+ <categoryname>system file</categoryname>
+ <description>
+ cascading style sheet
+ </description>
+ </file>
+ <file>
+ <source>loncom/MathML/mathml.dtd</source>
+ <target dist='default'>home/httpd/html/adm/MathML/mathml.dtd</target>
+ <categoryname>system file</categoryname>
  <description>
+ document type definition
  </description>
  </file>
  <file>
- <source></source>
+ <source>loncom/auth/londes.js</source>
- <target dist='default'></target>
+ <target dist='default'>home/httpd/html/res/adm/includes/londes.js</target>
- <categoryname></categoryname>
+ <categoryname>interface file</categoryname>
  <description>
+ Encryption Routines according to Data Encryption Standard DES, written in
+ javascript.
  </description>
  </file>
  <file>
- <source></source>
+ <source>loncom/homework/lectureonline.lcpm</source>
- <target dist='default'></target>
+ <target dist='default'>home/httpd/html/res/adm/includes/lectureonline.lcpm
- <categoryname></categoryname>
+ </target>
+ <categoryname>handler</categoryname>
  <description>
+ Intended for providing perl functions for the &lt;script&gt;&lt;/script&gt;
+ environment in a problem that was converted from lectureonline.
  </description>
  </file>
  <file>
- <source></source>
+ <source>loncom/homework/default_homework.lcpm</source>
- <target dist='default'></target>
+ <target dist='default'>home/httpd/html/res/adm/includes/default_homework.lcpm
- <categoryname></categoryname>
+ </target>
+ <categoryname>handler</categoryname>
  <description>
+ Provides many functions for the &lt;script&gt; environment in a .problem.
+ Functions are documented in CVS:loncapa/doc/homework/homework5.html.
  </description>
  </file>
  <file>
- <source></source>
+ <source>loncom/homework/capa.units</source>
- <target dist='default'></target>
+ <target dist='default'>home/httpd/html/res/adm/includes/capa.units</target>
- <categoryname></categoryname>
+ <categoryname>static conf</categoryname>
  <description>
+ Define unit prefixing and conversion for CAPA problem handling.
  </description>
  </file>
+ <fileglob>
+ <glob>*.gif</glob>
+ <sourcedir>loncom/html/res/adm/pages/</sourcedir>
+ <targetdir dist='default'>home/httpd/html/res/adm/pages/</targetdir>
+ <categoryname>graphic file</categoryname>
+ <description>icons used for the entire LON-CAPA user interface</description>
+ <filenames>
+.gif;
+.gif;
+.gif;
+.gif;
+.gif;
+.gif;
+.gif;
+.gif;
+.gif;
+.gif;
+ a.gif;
+ anot.gif;
+ b.gif;
+ back.gif;
+ bkm.gif;
+ brws.gif;
+ c.gif;
+ catalog.gif;
+ ccrs.gif;
+ chat.gif;
+ chrt.gif;
+ colon.gif;
+ com.gif;
+ courses.gif;
+ cprv.gif;
+ cstr.gif;
+ d.gif;
+ dempty.gif;
+ e.gif;
+ egrd.gif;
+ empty.gif;
+ enrl.gif;
+ eval.gif;
+ f.gif;
+ fdbk.gif;
+ feedback.gif;
+ forw.gif;
+ g.gif;
+ grds.gif;
+ group.gif;
+ h.gif;
+ help.gif;
+ hyphen.gif;
+ i.gif;
+ info.gif;
+ j.gif;
+ k.gif;
+ l.gif;
+ ledblink.gif;
+ ledgreen.gif;
+ ledoff.gif;
+ ledon.gif;
+ ledsend.gif;
+ logout.gif;
+ m.gif;
+ mrk.gif;
+ n.gif;
+ nav.gif;
+ next.gif;
+ nothumb.gif;
+ o.gif;
+ p.gif;
+ parm.gif;
+ pgrd.gif;
+ pparm.gif;
+ pref.gif;
+ prev.gif;
+ prt.gif;
+ q.gif;
+ qempty.gif;
+ r.gif;
+ reload.gif;
+ remotebg.gif;
+ res.gif;
+ roles.gif;
+ s.gif;
+ sbkm.gif;
+ slash.gif;
+ space.gif;
+ spacer.gif;
+ sprs.gif;
+ src.gif;
+ stat.gif;
+ subm.gif;
+ t.gif;
+ title.gif;
+ u.gif;
+ v.gif;
+ vbkm.gif;
+ w.gif;
+ x.gif;
+ y.gif;
+ z.gif
+ </filenames>
+ </fileglob>
  <file>
- <source></source>
+ <source>loncom/html/res/adm/pages/imgmaps.html</source>
- <target dist='default'></target>
+ <target dist='default'>home/httpd/html/res/adm/pages/imgmaps.html</target>
- <categoryname></categoryname>
+ <categoryname>interface file</categoryname>
  <description>
+ image maps for the LON-CAPA remote control
  </description>
  </file>
  <file>
- <source></source>
+ <source>loncom/html/res/adm/pages/index.html</source>
- <target dist='default'></target>
+ <target dist='default'>home/httpd/html/res/adm/pages/index.html</target>
- <categoryname></categoryname>
+ <categoryname>interface file</categoryname>
  <description>
+ welcoming page to the LON-CAPA system upon login
  </description>
  </file>
  <file>
- <source></source>
+ <source>loncom/html/res/adm/pages/menu.html</source>
- <target dist='default'></target>
+ <target dist='default'>home/httpd/html/res/adm/pages/menu.html</target>
- <categoryname></categoryname>
+ <categoryname>interface file</categoryname>
+ <description>
+ renders the HTML (including image maps) for the LON-CAPA remote control
+ </description>
+ </file>
+ <fileglob>
+ <glob>*.gif</glob>
+ <sourcedir>loncom/html/res/adm/pages/indexericons/</sourcedir>
+ <targetdir dist='default'>home/httpd/html/res/adm/pages/indexericons/
+ </targetdir>
+ <categoryname>graphic file</categoryname>
+ <description>
+ icons used for directory indexing and login screen
+ </description>
+ <filenames>
+ a.gif;
+ alert.black.gif;
+ alert.red.gif;
+ back.gif;
+ ball.gray.gif;
+ ball.red.gif;
+ binary.gif;
+ binhex.gif;
+ blank.gif;
+ bomb.gif;
+ box1.gif;
+ box2.gif;
+ broken.gif;
+ burst.gif;
+ c.gif;
+ comp.blue.gif;
+ comp.gray.gif;
+ compressed.gif;
+ continued.gif;
+ course.gif;
+ dir.gif;
+ down.gif;
+ dvi.gif;
+ f.gif;
+ folder.gif;
+ folder.open.gif;
+ folder.sec.gif;
+ folder_closed.gif;
+ folder_closed_pressed.gif;
+ folder_new.gif;
+ folder_opened.gif;
+ folder_opened_pressed.gif;
+ folder_pointer_closed.gif;
+ folder_pointer_opened.gif;
+ folder_spacer.gif;
+ folder_trash.gif;
+ forward.gif;
+ generic.gif;
+ generic.red.gif;
+ generic.sec.gif;
+ hand.right.gif;
+ hand.up.gif;
+ html.gif;
+ image1.gif;
+ image2.gif;
+ image3.gif;
+ index.gif;
+ layout.gif;
+ left.gif;
+ link.gif;
+ mov.gif;
+ movie1.gif;
+ p.gif;
+ patch.gif;
+ pdf.gif;
+ portal.gif;
+ problem.gif;
+ ps.gif;
+ quill.gif;
+ right.gif;
+ screw1.gif;
+ screw2.gif;
+ script.gif;
+ sound1.gif;
+ sound2.gif;
+ sphere1.gif;
+ sphere2.gif;
+ tar.gif;
+ tex.gif;
+ text.gif;
+ transfer.gif;
+ unknown.gif;
+ up.gif;
+ uu.gif;
+ uuencoded.gif;
+ white_space_20_22.gif;
+ white_space_22_22.gif;
+ whitespace1.gif;
+ whitespace10.gif;
+ whitespace2.gif;
+ whitespace3.gif;
+ whitespace4.gif;
+ whitespace5.gif;
+ whitespace6.gif;
+ whitespace7.gif;
+ whitespace8.gif;
+ whitespace9.gif;
+ world1.gif;
+ world2.gif
+ </filenames>
+ </fileglob>
+ <fileglob>
+ <glob>*.gif</glob>
+ <sourcedir>loncom/html/res/adm/pages/bookmarkmenu/</sourcedir>
+ <targetdir dist='default'>home/httpd/html/res/adm/pages/bookmarkmenu/
+ </targetdir>
+ <categoryname>graphic file</categoryname>
+ <description>
+ icons used for the bookmark portion of the LON-CAPA user interface
+ </description>
+ <filenames>
+ folder_anim.gif;
+ folder_close.gif;
+ folder_drag.gif;
+ folder_new.gif;
+ folder_open.gif;
+ folder_pointer_closed.gif;
+ folder_pointer_opened.gif;
+ folder_static.gif;
+ folder_trash.gif;
+ folder_trash_hover.gif;
+ left_bar.gif;
+ link.gif;
+ link_anim.gif;
+ link_drag.gif;
+ ll_corner.gif;
+ lower_bar.gif;
+ lr_corner.gif;
+ pix.gif;
+ right_bar.gif;
+ toolbar_bg.gif;
+ ul_corner.gif;
+ upper_bar.gif;
+ ur_corner.gif
+ </filenames>
+ </fileglob>
+ <fileglob>
+ <glob>*.html</glob>
+ <sourcedir>loncom/html/res/adm/pages/bookmarkmenu/</sourcedir>
+ <targetdir dist='default'>home/httpd/html/res/adm/pages/bookmarkmenu/
+ </targetdir>
+ <categoryname>interface file</categoryname>
  <description>
+ associated with the scheme of displaying bookmarks
+ </description>
+ <filenames>
+ bookmarkmenu_toolbar.html;
+ blank.html;
+ closechildren.html
+ </filenames>
+ </fileglob>
+ <file>
+ <source>loncom/html/res/adm/pages/bookmarkmenu/bookmarklib.js</source>
+ <target dist='default'>
+ home/httpd/html/res/adm/pages/bookmarkmenu/bookmarklib.js</target>
+ <categoryname>interface file</categoryname>
+ <description>
+ javascript for handling client-side interactions with bookmark interface
  </description>
  </file>
  <file>
- <source></source>
+ <source>loncom/build/check-rpms</source>
- <target dist='default'></target>
+ <target dist='default'>usr/local/bin/check-rpms</target>
- <categoryname></categoryname>
+ <categoryname>root script</categoryname>
+ <description>
+ compare installed rpms with up-to-date distribution
+ </description>
+ <status>tested/documented/beta</status>
+ </file>
+ <file>
+ <source>doc/man/check-rpms.1</source>
+ <target dist='default'>usr/local/man/man1/check-rpms.1</target>
+ <categoryname>doc</categoryname>
+ <description>man page for check-rpms</description>
+ <build trigger='always run'>
+ loncom/build/pod2man.sh check-rpms &gt; ../../doc/man/check-rpms.1 &amp;&amp; \
+ echo 'manifying check-rpms'
+ </build>
+ <status>beta</status>
+ <dependencies>
+ ../../loncom/build/check-rpms
+ </dependencies>
+ </file>
+ <file>
+ <source>doc/scripts/check-rpms.html</source>
+ <target dist='default'>home/httpd/html/adm/help/scripts/check-rpms.html
+ </target>
+ <categoryname>doc</categoryname>
+ <description>POD-derived page for check-rpms</description>
+ <build trigger='always run'>
+ loncom/build/pod2html.sh check-rpms &gt; ../../doc/scripts/check-rpms.html \
+ &amp;&amp; echo 'pod2html checkrpms'
+ </build>
+ <status>works/unverified</status>
+ <dependencies>
+ ../../loncom/build/check-rpms
+ </dependencies>
+ </file>
+ <file>
+ <source>loncom/build/loncaparestoreconfigurations</source>
+ <target dist='default'>usr/sbin/loncaparestoreconfigurations</target>
+ <categoryname>script</categoryname>
+ <description>
+ restores .rpmsave files after a LON-CAPA-base upgrade
+ </description>
+ <status>deprecated</status>
+ </file>
+ <file>
+ <source>loncom/cron/loncapa</source>
+ <target dist='default'>etc/cron.d/loncapa</target>
+ <categoryname>static conf</categoryname>
+ <description>
+ file that specifies periodic processes to run for the LON-CAPA machine
+ </description>
+ </file>
+ <file>
+ <source>loncom/ntp/step-tickers</source>
+ <target dist='default'>etc/ntp/step-tickers</target>
+ <categoryname>conf</categoryname>
+ <description>
+ file that stimulates running of ntpdate upon init.d/xntpd initiation
+ </description>
+ <note>
+ <table cellpadding='0' cellspacing='0' border='1'>
+ <tr><td><tt>just one line with the ip address of the server</tt></td></tr>
+ </table>
+ </note>
+ </file>
+ <file>
+ <source>loncom/pam.d/pwauth</source>
+ <target dist='default'>etc/pam.d/pwauth</target>
+ <categoryname>static conf</categoryname>
  <description>
+ file that allows setuid password privileges for pwauth executable
  </description>
  </file>
+ <file>
+ <source>loncom/pam.d/pwchange</source>
+ <target dist='default'>etc/pam.d/pwchange</target>
+ <categoryname>static conf</categoryname>
+ <description>
+ file that allows setuid password privileges for pwchange (lcpasswd) executable
+ </description>
+ </file>
+ <file>
+ <source>loncom/init.d/loncontrol</source>
+ <target dist='default'>etc/rc.d/init.d/loncontrol</target>
+ <categoryname>root script</categoryname>
+ <description>
+ Controls the launching/halting of lonc, lond, and lonsql processes.
+ </description>
+ </file>
+ <link>
+ <linkto>etc/rc.d/init.d/loncontrol</linkto>
+ <target dist='default'>
+ etc/rc.d/rc0.d/K05loncontrol;
+ etc/rc.d/rc1.d/K05loncontrol;
+ etc/rc.d/rc2.d/K05loncontrol;
+ etc/rc.d/rc3.d/S95loncontrol;
+ etc/rc.d/rc4.d/S95loncontrol;
+ etc/rc.d/rc5.d/S95loncontrol;
+ etc/rc.d/rc6.d/K05loncontrol
+ </target>
+ <categoryname>symbolic link</categoryname>
+ <description>
+ symbolic links to /etc/rc.d/init.d/loncontrol for run-levels</description>
+ </link>
+ <file>
+ <source>loncom/atalk/config</source>
+ <target dist='default'>etc/atalk/config</target>
+ <categoryname>conf</categoryname>
+ <description>
+ configuration file to make LON-CAPA server file space accessible to
+ Appleshares access (Macintosh)
+ </description>
+ </file>
+ </files>
  </lpml>

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>

Removed from v.1.7
changed lines
	Added in v.1.134