--- doc/loncapafiles/loncapafiles.lpml	2002/01/31 20:17:28	1.95
+++ doc/loncapafiles/loncapafiles.lpml	2002/03/03 21:28:01	1.109
@@ -1,7 +1,7 @@
 <!-- loncapafiles.lpml -->
 <!-- Scott Harrison -->
 
-<!-- $Id: loncapafiles.lpml,v 1.95 2002/01/31 20:17:28 harris41 Exp $ -->
+<!-- $Id: loncapafiles.lpml,v 1.109 2002/03/03 21:28:01 harris41 Exp $ -->
 
 <!--
 
@@ -37,6 +37,15 @@ http://www.lon-capa.org/
 
 <lpml>
 <specialnotices>
+<specialnotice dist='default'>
+!!! REDHAT 6.2 NOTICE !!!
+!!! Sometimes an incorrect /etc/hosts file is incorrectly generated !!!
+!!! This sometimes happens (bad): !!!
+!!! 127.0.0.1  computer1 localhost.localdomain localhost  !!!
+!!! Should be: !!!
+!!! 127.0.0.1  localhost.localdomain  localhost !!!
+!!! 35.2.3.80  computer1 computer1.notreal.msu.edu !!!
+</specialnotice>
 <specialnotice dist='redhat7.0 redhat7.1'>
 !!!!!!!!!  REDHAT 7.*   NOTICE   !!!!!!!!!!!!!!!!!!!!
 !!!!!!!!!  LINE IN Cookie.pm     !!!!!!!!!!!!!!!!!!!!
@@ -183,11 +192,10 @@ Division of Science and Mathematics Educ
   <rpmGroup>Utilities/System</rpmGroup>
   <rpmSource>LON-CAPA-base-3.1.tar.gz</rpmSource>
   <rpmAutoReqProv>no</rpmAutoReqProv>
-  <rpmdescription>This package facilitates a base installation of LON-CAPA files in their directories.\n
-The files in this package are only those directly associated with the network communication\n
-layer established through direct server-to-server communications (via lond and lonc); plus\n
-those which configure (but otherwise not constitute) external software packages like Apache\n
-and Athena-Kerberos.  For more on the LON-CAPA project, visit http://www.lon-capa.org/.</rpmdescription>
+  <rpmdescription>This package facilitates a base installation of LON-CAPA \n
+files in their directories.\n
+For more on the LON-CAPA project, visit http://www.lon-capa.org/.
+  </rpmdescription>
   <rpmpre>echo '***********************************************************************'\n
 echo 'LON-CAPA  LearningOnline with CAPA'\n
 echo 'http://www.lon-capa.org/'\n
@@ -201,10 +209,6 @@ echo 'This installation assumes an insta
 echo ' '\n
 echo 'The server computer should be currently connected to the ethernet'\n
 echo ' '\n
-echo 'The files in this package are only those directly associated with the network communication'\n
-echo 'layer established through direct server-to-server communications (via lond and lonc); plus'\n
-echo 'those which configure (but otherwise not constitute) external software packages like Apache'\n
-echo 'and Athena-Kerberos.'\n
 echo '***********************************************************************'\n
 </rpmpre>
 <rpmRequires>
@@ -247,50 +251,56 @@ echo '**********************************
   </description>
 </directory>
 <directory>
+  <targetdir dist='redhat7.1'>etc/samba</targetdir>
+  <categoryname>standard</categoryname>
+  <description>configuration directory for samba authentication
+  </description>
+</directory>
+<directory>
   <targetdir dist='default'>etc/rc.d/init.d</targetdir>
-  <targetdir dist='redhat7.1 debian2.2'>etc/init.d</targetdir>
+  <targetdir dist='debian2.2'>etc/init.d</targetdir>
   <categoryname>standard</categoryname>
   <description>scripts that run during system startup</description>
 </directory>
 <directory>
   <targetdir dist='default'>etc/rc.d/rc0.d</targetdir>
-  <targetdir dist='redhat7.1 debian2.2'>etc/rc0.d</targetdir>
+  <targetdir dist='debian2.2'>etc/rc0.d</targetdir>
   <categoryname>standard</categoryname>
   <description>scripts that run for run-level 0</description>
 </directory>
 <directory>
   <targetdir dist='default'>etc/rc.d/rc1.d</targetdir>
-  <targetdir dist='redhat7.1 debian2.2'>etc/rc1.d</targetdir>
+  <targetdir dist='debian2.2'>etc/rc1.d</targetdir>
   <categoryname>standard</categoryname>
   <description>scripts that run for run-level 1</description>
 </directory>
 <directory>
   <targetdir dist='default'>etc/rc.d/rc2.d</targetdir>
-  <targetdir dist='redhat7.1 debian2.2'>etc/rc2.d</targetdir>
+  <targetdir dist='debian2.2'>etc/rc2.d</targetdir>
   <categoryname>standard</categoryname>
   <description>scripts that run for run-level 2</description>
 </directory>
 <directory>
   <targetdir dist='default'>etc/rc.d/rc3.d</targetdir>
-  <targetdir dist='redhat7.1 debian2.2'>etc/rc3.d</targetdir>
+  <targetdir dist='debian2.2'>etc/rc3.d</targetdir>
   <categoryname>standard</categoryname>
   <description>scripts that run for run-level 3</description>
 </directory>
 <directory>
   <targetdir dist='default'>etc/rc.d/rc4.d</targetdir>
-  <targetdir dist='redhat7.1 debian2.2'>etc/rc4.d</targetdir>
+  <targetdir dist='debian2.2'>etc/rc4.d</targetdir>
   <categoryname>standard</categoryname>
   <description>scripts that run for run-level 4</description>
 </directory>
 <directory>
   <targetdir dist='default'>etc/rc.d/rc5.d</targetdir>
-  <targetdir dist='redhat7.1 debian2.2'>etc/rc5.d</targetdir>
+  <targetdir dist='debian2.2'>etc/rc5.d</targetdir>
   <categoryname>standard</categoryname>
   <description>scripts that run for run-level 5</description>
 </directory>
 <directory>
   <targetdir dist='default'>etc/rc.d/rc6.d</targetdir>
-  <targetdir dist='redhat7.1 debian2.2'>etc/rc6.d</targetdir>
+  <targetdir dist='debian2.2'>etc/rc6.d</targetdir>
   <categoryname>standard</categoryname>
   <description>scripts that run for run-level 6</description>
 </directory>
@@ -316,7 +326,7 @@ echo '**********************************
   </description>
 </directory>
 <directory>
-  <targetdir dist='default'>home/httpd/perl/londchld</targetdir>
+  <targetdir dist='default'>home/httpd/html/lon-status/londchld</targetdir>
   <categoryname>server standard</categoryname>
   <description>
 Used by lond parent to check if children are responding to USR1 signals
@@ -492,6 +502,16 @@ LON-CAPA system.</description>
   </description>
 </directory>
 <directory>
+  <targetdir dist='default'>usr/local/bin</targetdir>
+  <categoryname>standard</categoryname>
+  <description>local binary files</description>
+</directory>
+<directory>
+  <targetdir dist='default'>usr/local/man/man1</targetdir>
+  <categoryname>standard</categoryname>
+  <description>local manual pages</description>
+</directory>
+<directory>
   <targetdir dist='default'>usr/man/man1</targetdir>
   <categoryname>standard</categoryname>
   <description>manual pages</description>
@@ -576,41 +596,6 @@ MySQL database</td></tr>
 </note>
 </file>
 <file>
-<source>loncom/httpd.conf</source>
-<target dist='default'>etc/httpd/conf/httpd.conf</target>
-<categoryname>static conf</categoryname>
-<description>
-This is the main server configuration file.  The settings here are
-more or less standard for the Apache web server.  Most notably (and
-importantly!), perl handling and mod_perl are enabled in this configuration
-file.
-</description>
-</file>
-<file>
-<source>loncom/srm.conf</source>
-<target dist='default'>etc/httpd/conf/srm.conf</target>
-<categoryname>static conf</categoryname>
-<description>
-<p>
-This file configures the "name space" of the Apache web server.  
-<tt>srm.conf</tt>
-defines when specific perl modules should be called to handle a given
-request.  This definition is a function of both the name of the perl module,
-and a specific regular expression associated with the URL, such as
-"^/res/.*\.page".
-</p>
-<p>
-Here is an example entry:
-<pre>
-&lt;LocationMatch "^/res/.*\.page$&gt;
-SetHandler perl-script
-PerlHandler Apache::lonpage
-&lt;/LocationMatch&gt;
-</pre>
-</p>
-</description>
-</file>
-<file>
 <source>loncom/startup.pl</source>
 <target dist='default'>etc/httpd/conf/startup.pl</target>
 <categoryname>static conf</categoryname>
@@ -656,6 +641,14 @@ parameter.
 </description>
 </file>
 <file>
+<source>loncom/cgi/clusterstatus.pl</source>
+<target dist='default'>home/httpd/cgi-bin/clusterstatus.pl</target>
+<categoryname>script</categoryname>
+<description>
+utility cgi script to view status of cluster
+</description>
+</file>
+<file>
 <source>loncom/cgi/graph.gif</source>
 <target dist='default'>home/httpd/cgi-bin/graph.gif</target>
 <categoryname>script</categoryname>
@@ -668,6 +661,22 @@ GDGraph-1.33 and GDTextUtils-0.80.
 </note>
 </file>
 <file>
+<source>loncom/cgi/lonversions.pl</source>
+<target dist='default'>home/httpd/cgi-bin/lonversions.pl</target>
+<categoryname>script</categoryname>
+<description>
+utility cgi script to view software versions of a remote server
+</description>
+</file>
+<file>
+<source>loncom/cgi/ping.pl</source>
+<target dist='default'>home/httpd/cgi-bin/ping.pl</target>
+<categoryname>script</categoryname>
+<description>
+cgi-script to ping other server
+</description>
+</file>
+<file>
 <source>loncom/cgi/plot.gif</source>
 <target dist='default'>home/httpd/cgi-bin/plot.gif</target>
 <categoryname>script</categoryname>
@@ -814,7 +823,7 @@ and privileges available in the network
 <file>
 <source>loncom/hosts.tab</source>
 <target dist='default'>home/httpd/lonTabs/hosts.tab</target>
-<categoryname>conf</categoryname>
+<categoryname>static conf</categoryname>
 <description>
 List of all machines in the LON-CAPA network.  Relates <tt>lonHostID</tt> to
 <tt>lonDefDomain</tt> and <u>IP address</u>.
@@ -909,7 +918,7 @@ loncom/build/pod2man.sh ../lonc > ../../
 <source>doc/scripts/lonc.html</source>
 <target dist='default'>home/httpd/html/adm/help/scripts/lonc.html</target>
 <categoryname>doc</categoryname>
-<description>man page for lonc</description>
+<description>POD-derived page for lonc</description>
 <build trigger='always run'>
 loncom/build/pod2html.sh ../lonc > ../../doc/scripts/lonc.html && echo 'pod2html lonc'
 </build>
@@ -953,7 +962,7 @@ loncom/build/pod2man.sh ../lond > ../../
 <source>doc/scripts/lond.html</source>
 <target dist='default'>home/httpd/html/adm/help/scripts/lond.html</target>
 <categoryname>doc</categoryname>
-<description>man page for lond</description>
+<description>POD-derived page for lond</description>
 <build trigger='always run'>
 loncom/build/pod2html.sh ../lond > ../../doc/scripts/lond.html && echo 'pod2html lond'
 </build>
@@ -997,7 +1006,7 @@ loncom/build/pod2man.sh ../lonsql > ../.
 <source>doc/scripts/lonsql.html</source>
 <target dist='default'>home/httpd/html/adm/help/scripts/lonsql.html</target>
 <categoryname>doc</categoryname>
-<description>man page for lonsql</description>
+<description>POD-derived page for lonsql</description>
 <build trigger='always run'>
 loncom/build/pod2html.sh ../lonsql > ../../doc/scripts/lonsql.html && echo 'pod2html lonsql'
 </build>
@@ -2875,6 +2884,7 @@ p.gif;
 parm.gif;
 pgrd.gif;
 pparm.gif;
+pref.gif;
 prev.gif;
 prt.gif;
 q.gif;
@@ -3085,40 +3095,46 @@ javascript for handling client-side inte
 </description>
 </file>
 <file>
-<source>loncom/build/loncapaverifypackages</source>
-<target dist='default'>usr/sbin/loncapaverifypackages</target>
-<categoryname>script</categoryname>
+<source>loncom/build/check-rpms</source>
+<target dist='default'>usr/local/bin/check-rpms</target>
+<categoryname>root script</categoryname>
 <description>
-checks the system RPMs against what install.lon-capa.org specifies
+compare installed rpms with up-to-date distribution
 </description>
-<status>deprecated</status>
+<status>tested/documented/beta</status>
 </file>
 <file>
-<source>loncom/build/loncaparestoreconfigurations</source>
-<target dist='default'>usr/sbin/loncaparestoreconfigurations</target>
-<categoryname>script</categoryname>
-<description>
-restores .rpmsave files after a LON-CAPA-base upgrade
-</description>
-<status>deprecated</status>
+<source>doc/man/check-rpms.1</source>
+<target dist='default'>usr/local/man/man1/check-rpms.1</target>
+<categoryname>doc</categoryname>
+<description>man page for check-rpms</description>
+<build trigger='always run'>
+loncom/build/pod2man.sh check-rpms > ../../doc/man/check-rpms.1 && echo 'manifying check-rpms'
+</build>
+<status>beta</status>
+<dependencies>
+../../loncom/build/check-rpms
+</dependencies>
 </file>
 <file>
-<source>loncom/build/loncapaautoupgrade</source>
-<target dist='default'>usr/sbin/loncapaautoupgrade</target>
-<categoryname>script</categoryname>
-<description>
-does all the things to coordinate updating of LON-CAPA base files.  Should be
-used with caution so that you do not lose work
-</description>
-<status>deprecated</status>
+<source>doc/scripts/check-rpms.html</source>
+<target dist='default'>home/httpd/html/adm/help/scripts/check-rpms.html</target>
+<categoryname>doc</categoryname>
+<description>POD-derived page for check-rpms</description>
+<build trigger='always run'>
+loncom/build/pod2html.sh check-rpms > ../../doc/scripts/check-rpms.html && echo 'pod2html checkrpms'
+</build>
+<status>works/unverified</status>
+<dependencies>
+../../loncom/build/check-rpms
+</dependencies>
 </file>
 <file>
-<source>loncom/build/loncapaverify</source>
-<target dist='default'>usr/sbin/loncapaverify</target>
+<source>loncom/build/loncaparestoreconfigurations</source>
+<target dist='default'>usr/sbin/loncaparestoreconfigurations</target>
 <categoryname>script</categoryname>
 <description>
-makes verification report using loncapaverifypackages and
-loncapaverifybasepackage
+restores .rpmsave files after a LON-CAPA-base upgrade
 </description>
 <status>deprecated</status>
 </file>