Annotation of doc/loncapafiles/ntpcheck.piml, revision 1.31

1.1       matthew     1: <!DOCTYPE piml PUBLIC "-//TUX/DTD piml 1.0 Final//EN" 
                      2: 	"http://lpml.sourceforge.net/DTD/piml.dtd">
1.2       matthew     3: <!-- ntpcheck.piml -->
1.1       matthew     4: <!-- Matthew Hall -->
                      5: 
1.31    ! raeburn     6: <!-- $Id: ntpcheck.piml,v 1.30 2017/06/30 03:23:27 raeburn Exp $ -->
1.1       matthew     7: 
                      8: <!--
                      9: 
                     10: This file is part of the LearningOnline Network with CAPA (LON-CAPA).
                     11: 
                     12: LON-CAPA is free software; you can redistribute it and/or modify
                     13: it under the terms of the GNU General Public License as published by
                     14: the Free Software Foundation; either version 2 of the License, or
                     15: (at your option) any later version.
                     16: 
                     17: LON-CAPA is distributed in the hope that it will be useful,
                     18: but WITHOUT ANY WARRANTY; without even the implied warranty of
                     19: MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
                     20: GNU General Public License for more details.
                     21: 
                     22: You should have received a copy of the GNU General Public License
                     23: along with LON-CAPA; if not, write to the Free Software
                     24: Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
                     25: 
                     26: /home/httpd/html/adm/gpl.txt
                     27: 
                     28: http://www.lon-capa.org/
                     29: 
                     30: -->
                     31: 
                     32: <piml>
                     33: <targetroot>/</targetroot>
                     34: <files>
                     35: <file>
1.10      raeburn    36: <target dist="default"></target>
1.1       matthew    37: <perlscript mode="fg">
                     38: print "Checking to be sure the Network Time Protocol is running properly.\n";
                     39: print "For more information on ntpd please see http://www.ntp.org/\n";
1.7       albertel   40: my $NTPD;
1.27      raeburn    41: my $checkcmd = 'ps -ef |grep ntp |grep -v grep |grep -v ntpcheck';
1.15      raeburn    42: my $startntpcmd;
                     43: my $is_running;
1.28      raeburn    44: if (('<DIST />' eq 'fedora15')    || ('<DIST />' eq 'fedora16') ||
                     45:     ('<DIST />' eq 'fedora17')    || ('<DIST />' eq 'fedora18') ||
                     46:     ('<DIST />' eq 'fedora19')    || ('<DIST />' eq 'fedora20') ||
                     47:     ('<DIST />' eq 'fedora21')    || ('<DIST />' eq 'fedora22') ||
                     48:     ('<DIST />' eq 'fedora23')    || ('<DIST />' eq 'fedora24') ||
1.31    ! raeburn    49:     ('<DIST />' eq 'fedora25')    || ('<DIST />' eq 'fedora26') ||
        !            50:     ('<DIST />' eq 'centos7')     || ('<DIST />' eq 'rhes7')    ||
        !            51:     ('<DIST />' eq 'scientific7') || ('<DIST />' eq 'sles12')) {
1.13      raeburn    52:     $NTPD = 'ntpd';
1.15      raeburn    53:     $startntpcmd = 'systemctl start ntpd.service';
1.13      raeburn    54:     if (!-e '/usr/sbin/ntpd') {
                     55:         print "ntp is not installed.\n";
                     56:         exit;
                     57:     }
1.7       albertel   58: } else {
1.13      raeburn    59:     if (-e "/etc/init.d/ntpd") {
                     60:         $NTPD = "ntpd";
                     61:     } elsif (-e "/etc/init.d/xntpd") {
                     62:         $NTPD = "xntpd";
                     63:     } elsif (-e "/etc/init.d/ntp") {
                     64:         $NTPD = "ntp"; 
                     65:     } else {
                     66:         print "ntp is not installed.\n";
                     67:         exit;
                     68:     }
1.30      raeburn    69:     $startntpcmd = "/etc/init.d/$NTPD start";
1.15      raeburn    70: }
                     71: 
                     72: if (open(PIPE,'-|',$checkcmd)) {
                     73:     $is_running = &lt;PIPE&gt;;
                     74:     chomp($is_running);
                     75:     close(PIPE);
                     76:     if (!$is_running) {
                     77:         print "WARNING: ntp is installed but is not currently running.\nPlease verify the configuration of ntp in /etc/ntp.conf and /etc/ntp/step-tickers\nStart ntp by executing\n $startntpcmd\n";
1.27      raeburn    78:     } else {
                     79:         print "ntp is installed and running\n";
1.13      raeburn    80:     }
1.15      raeburn    81: } else {
                     82:     print "Could not determine ntp status.\n";
1.1       matthew    83: }
1.15      raeburn    84: 
1.1       matthew    85: # chkconfig barfs to stderr if the target isn't set up right.
1.28      raeburn    86: if (('<DIST />' eq 'fedora15')    || ('<DIST />' eq 'fedora16') ||
                     87:     ('<DIST />' eq 'fedora17')    || ('<DIST />' eq 'fedora18') ||
                     88:     ('<DIST />' eq 'fedora19')    || ('<DIST />' eq 'fedora20') ||
                     89:     ('<DIST />' eq 'fedora21')    || ('<DIST />' eq 'fedora22') ||
                     90:     ('<DIST />' eq 'fedora23')    || ('<DIST />' eq 'fedora24') || 
1.31    ! raeburn    91:     ('<DIST />' eq 'fedora25')    || ('<DIST />' eq 'fedora26') || 
        !            92:     ('<DIST />' eq 'centos7')     || ('<DIST />' eq 'rhes7')    ||
        !            93:     ('<DIST />' eq 'scientific7') || ('<DIST />' eq 'sles12')) {
1.12      raeburn    94:     if (!-l "/etc/systemd/system/multi-user.target.wants/ntpd.service") {  
                     95:         print "**** WARNING: ntpd is not configured to run at boot.  To correct this run:\nsystemctl enable ntpd.service\n";
                     96:     }
1.1       matthew    97:     exit;
1.12      raeburn    98: } else {
1.25      raeburn    99:     my $checking_bin;
                    100:     my $restartchk;
                    101:     if (('<DIST />' eq 'debian5') || ('<DIST />' eq 'debian6') || ('<DIST />' eq 'ubuntu6') || 
                    102:         ('<DIST />' eq 'ubuntu8') || ('<DIST />' eq 'ubuntu10') || ('<DIST />' eq 'ubuntu12') || 
1.26      raeburn   103:         ('<DIST />' eq 'ubuntu14') || ('<DIST />' eq 'ubuntu16')) {
1.25      raeburn   104:         $checking_bin = '/usr/sbin/sysv-rc-conf';
                    105:     } else {
                    106:         $checking_bin = '/sbin/chkconfig';
                    107:     }
1.12      raeburn   108:     $restartchk = `$checking_bin --list $NTPD 2>/dev/null`;
                    109:     if ($restartchk eq '') {
                    110:         print "**** WARNING: ntpd is either not installed or not configured to run at boot.\n";
                    111:         exit;
                    112:     }
                    113:     if ($restartchk =~ /^error reading information on service / ||
                    114:         $restartchk !~ /\d:(on|off)/) {
                    115:         print "**** WARNING: Unable to check status $NTPD with $checking_bin.\n";
                    116:         exit;
                    117:     }
                    118:     if ($restartchk !~ /\s3:on/) {
                    119:         print "**** WARNING: ntpd is not set to start at runlevel 3.  To correct this run:\n$checking_bin --level 345 $NTPD on\n";
                    120:         exit;
                    121:     }
                    122:     if ($restartchk !~ /\s5:on/) {
                    123:         print "**** WARNING: ntpd is not set to start at runlevel 5.  To correct this run:\n$checking_bin --level 345 $NTPD on\n";
                    124:         exit;
                    125:     }
1.1       matthew   126: }
                    127: </perlscript>
                    128: </file>
                    129: </files>
                    130: </piml>

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>