--- doc/loncapafiles/updatequery.piml	2002/05/13 09:05:18	1.7
+++ doc/loncapafiles/updatequery.piml	2002/06/12 17:07:55	1.16
@@ -1,7 +1,7 @@
 <!-- updatequery.piml -->
 <!-- Scott Harrison -->
 
-<!-- $Id: updatequery.piml,v 1.7 2002/05/13 09:05:18 harris41 Exp $ -->
+<!-- $Id: updatequery.piml,v 1.16 2002/06/12 17:07:55 harris41 Exp $ -->
 
 <!--
 
@@ -52,7 +52,7 @@ sleep(3);
 </perlscript>
 </file>
 <file>
-<target dist='default'>/home/httpd/lonUsers/</target>
+<target dist='default'>/home/httpd/lonTabs/hosts.tab</target>
 <perlscript mode='fg'>
 $|=1;
 unless (-e "<TARGET />") {
@@ -65,8 +65,8 @@ or contact sharrison\@mail.lon-capa.org.
 ===============================================================================
 The following 4 values are needed to configure LON-CAPA:
 * Machine Role
-* Machine ID Name
-* LON-CAPA Domain Name, and
+* LON-CAPA Domain Name
+* LON-CAPA Machine ID Name, and
 * System Administration E-mail Address.
 END
 
@@ -120,48 +120,45 @@ my $ipdomain='';
 if ($hostname=~/([^\.]*)\.([^\.]*)$/) {
   $ipdomain=$1;
 }
-my $lonHostID;
-if ($ipdomain) {
-  $lonHostID=$ipdomain.$r.int(1+rand(9)); # should be probably detect against
-                                          # the hosts.tab
-}
 
   print(&lt;&lt;END);
 
-**** Machine ID Name ****
-[this does NOT need to correspond to internet address names;
- this name MUST be unique to the whole LON-CAPA network;
- we recommend that you use a name based off of your institution;
- good examples: "msul1" or "bionetl1";
- bad examples: "loncapabox" or "studentsinside"]
+**** Domain ****
+[this does NOT need to correspond to internet address domains,
+ examples might be "msu" or "bionet" or "vermontcc"]
 END
-# get machine name
+
+# get domain name
 # accept if valid, if not valid, tell user and repeat
 $flag=0;
+my $lonDefDomain;
 while (!$flag) {
 if ($ipdomain) {
 print(&lt;&lt;END);
-ENTER LONCAPA MACHINE ID [$lonHostID]:
+ENTER LONCAPA DOMAIN [$ipdomain]:
 END
 }
 else {
   print(&lt;&lt;END);
-ENTER LONCAPA MACHINE ID:
+ENTER LONCAPA DOMAIN:
 END
 }
   my $choice=&lt;&gt;;
   chomp($choice);
-  if ($lonHostID and $choice=~/^\s*$/) {
-    $choice=$lonHostID;
+  if ($ipdomain and $choice=~/^\s*$/) {
+    $choice=$ipdomain;
     open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
-    print(OUT 'lonHostID'."\t".$choice."\n");
+    print(OUT 'lonDefDomain'."\t".$choice."\n");
     close(OUT);
+    $lonDefDomain=$choice;
     $flag=1;
   }
   elsif ($choice!~/\_/ and $choice=~/^\w+$/) {
     open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
-    print(OUT 'lonHostID'."\t".$choice."\n");
+    print(OUT 'lonDefDomain'."\t".$choice."\n");
     close(OUT);
+    $lonDefDomain=$choice;
+    $r='l';
     $flag=1;
   }
   else {
@@ -169,44 +166,50 @@ END
   }
 }
 
+my $lonHostID;
+if ($lonDefDomain) {
+  $lonHostID=$lonDefDomain.$r.int(1+rand(9)); # should be probably also detect
+                                              # against the hosts.tab
+}
+
   print(&lt;&lt;END);
 
-**** Domain ****
-[this does NOT need to correspond to internet address domains,
- examples might be "msu" or "bionet" or "vermontcc"]
+**** Machine ID Name ****
+[this does NOT need to correspond to internet address names;
+ this name MUST be unique to the whole LON-CAPA network;
+ we recommend that you use a name based off of your institution;
+ good examples: "msul1" or "bionetl1";
+ bad examples: "loncapabox" or "studentsinside"]
 END
-
-# get domain name
+# get machine name
 # accept if valid, if not valid, tell user and repeat
 $flag=0;
-my $lonDefDomain;
 while (!$flag) {
 if ($ipdomain) {
 print(&lt;&lt;END);
-ENTER LONCAPA DOMAIN [$ipdomain]:
+ENTER LONCAPA MACHINE ID [$lonHostID]:
 END
 }
 else {
   print(&lt;&lt;END);
-ENTER LONCAPA DOMAIN:
+ENTER LONCAPA MACHINE ID:
 END
 }
   my $choice=&lt;&gt;;
   chomp($choice);
-  if ($ipdomain and $choice=~/^\s*$/) {
-    $choice=$ipdomain;
+  if ($lonHostID and $choice=~/^\s*$/) {
+    $choice=$lonHostID;
     open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
-    print(OUT 'lonDefDomain'."\t".$choice."\n");
+    print(OUT 'lonHostID'."\t".$choice."\n");
     close(OUT);
-    $lonDefDomain=$choice;
+    $lonHostID=$choice;
     $flag=1;
   }
   elsif ($choice!~/\_/ and $choice=~/^\w+$/) {
     open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
-    print(OUT 'lonDefDomain'."\t".$choice."\n");
+    print(OUT 'lonHostID'."\t".$choice."\n");
     close(OUT);
-    $lonDefDomain=$choice;
-    $r='l';
+    $lonHostID=$choice;
     $flag=1;
   }
   else {
@@ -217,7 +220,7 @@ END
 # get e-mail address
 # accept if valid, if not valid, tell user and repeat
 $flag=0;
-my $lonAdmEmail;
+my $lonAdmEMail;
 while (!$flag) {
   print(&lt;&lt;END);
 
@@ -231,9 +234,9 @@ END
   chomp($choice);
   if ($choice=~/\@/) {
     open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
-    print(OUT 'lonAdmEmail'."\t".$choice."\n");
+    print(OUT 'lonAdmEMail'."\t".$choice."\n");
     close(OUT);
-    $lonAdmEmail=$choice;
+    $lonAdmEMail=$choice;
     $flag=1;
   }
   else {
@@ -252,27 +255,24 @@ my %perlvar;
 	    if ($configline =~ /^[^\#]*PerlSetVar/) {
 		my ($unused,$varname,$varvalue)=split(/\s+/,$configline);
 		chomp($varvalue);
-		$perlvar{$varname}=$varvalue;
+		$perlvar{$varname}=$varvalue if $varvalue!~/^\{\[\[\[\[/;
 	    }
 	}
 	close(CONFIG);
     }
     $perlvar{'lonHostID'}=$lonHostID;
     $perlvar{'lonDefDomain'}=$lonDefDomain;
-    $perlvar{'lonAdmEmail'}=$lonAdmEmail;
+    $perlvar{'lonAdmEMail'}=$lonAdmEMail;
     $perlvar{'lonRole'}=$lonRole;
-    unless ($perlvar{'lonSqlAccess'}) {
-       $perlvar{'lonSqlAccess'}='localhostkey';
-    }
-    unless ($perlvar{'lonLoadLim'}) {
+    unless ($perlvar{'lonLoadLim'} and $perlvar{'lonLoadLim'}!~/\{\[\[\[\[/) {
        $perlvar{'lonLoadLim'}='2.00';
     }
-    unless ($perlvar{'lonExpire'}) {
+    unless ($perlvar{'lonExpire'} and $perlvar{'lonExpire'}!~/\{\[\[\[\[/) {
        $perlvar{'lonExpire'}='86400';
     }
-    unless ($perlvar{'lonReceipt'}) {
+    unless ($perlvar{'lonReceipt'} and $perlvar{'lonReceipt'}!~/\{\[\[\[\[/) {
        my $lonReceipt='';
-       srand($$.time);
+       srand(time ^ $$ ^ unpack "%L*", `ps axww | gzip`);
        my @alnum=(0..9,a..z);
        foreach my $i (1..20) {
 	 $lonReceipt.=$alnum[int(rand(36))];
@@ -296,7 +296,6 @@ END
 <perlscript mode='fg'>
 # read values from loncapa.conf
 my $confdir='/etc/httpd/conf/';
-#my $confdir='';
 my $filename='loncapa.conf';
 my %perlvar;
     if (-e "$confdir$filename") {
@@ -311,6 +310,21 @@ my %perlvar;
 	}
 	close(CONFIG);
     }
+    unless ($perlvar{'lonLoadLim'} and $perlvar{'lonLoadLim'}!~/\{\[\[\[\[/) {
+       $perlvar{'lonLoadLim'}='2.00';
+    }
+    unless ($perlvar{'lonExpire'} and $perlvar{'lonExpire'}!~/\{\[\[\[\[/) {
+       $perlvar{'lonExpire'}='86400';
+    }
+    unless ($perlvar{'lonReceipt'} and $perlvar{'lonReceipt'}!~/\{\[\[\[\[/) {
+       my $lonReceipt='';
+       srand(time ^ $$ ^ unpack "%L*", `ps axww | gzip`);
+       my @alnum=(0..9,a..z);
+       foreach my $i (1..20) {
+	 $lonReceipt.=$alnum[int(rand(36))];
+       }
+       $perlvar{'lonReceipt'}=$lonReceipt;
+    }
 my %perlvarstatic;
     if (-e "${confdir}loncapa_apache.conf") {
 	open(CONFIG,'&lt;'.$confdir.'loncapa_apache.conf') or 
@@ -333,9 +347,9 @@ while (!$flag) {
 
 ===============================================================================
 This is now the current configuration of your machine.
-1) Machine Name: $perlvar{'lonHostID'}
-2) Domain Name: $perlvar{'lonDefDomain'}
-3) System Administrator's E-mail Address: $perlvar{'lonAdmEmail'}
+1) Domain Name: $perlvar{'lonDefDomain'}
+2) Machine Name: $perlvar{'lonHostID'}
+3) System Administrator's E-mail Address: $perlvar{'lonAdmEMail'}
 4) Role: $perlvar{'lonRole'}
 5) Cache Expiration Time: $perlvar{'lonExpire'}
 6) Server Load: $perlvar{'lonLoadLim'}
@@ -348,30 +362,30 @@ my $choice=&lt;&gt;;
 chomp($choice);
   if ($choice==1) {
   print(&lt;&lt;END);
-1) Machine Name: $perlvar{'lonHostID'}
+1) Domain Name: $perlvar{'lonDefDomain'}
 ENTER NEW VALUE:
 END
     my $choice2=&lt;&gt;;
     chomp($choice2);
-    $perlvar{'lonHostID'}=$choice2;
+    $perlvar{'lonDefDomain'}=$choice2;
   }
   elsif ($choice==2) {
   print(&lt;&lt;END);
-2) Domain Name: $perlvar{'lonDefDomain'}
+2) Machine Name: $perlvar{'lonHostID'}
 ENTER NEW VALUE:
 END
     my $choice2=&lt;&gt;;
     chomp($choice2);
-    $perlvar{'lonDefDomain'}=$choice2;
+    $perlvar{'lonHostID'}=$choice2;
   }
   elsif ($choice==3) {
   print(&lt;&lt;END);
-3) System Administrator's E-mail Address: $perlvar{'lonAdmEmail'}
+3) System Administrator's E-mail Address: $perlvar{'lonAdmEMail'}
 ENTER NEW VALUE:
 END
     my $choice2=&lt;&gt;;
     chomp($choice2);
-    $perlvar{'lonAdmEmail'}=$choice2;
+    $perlvar{'lonAdmEMail'}=$choice2;
   }
   elsif ($choice==4) {
   print(&lt;&lt;END);
@@ -411,7 +425,7 @@ END
       die("Cannot output to $confdir$filename\n");
     foreach my $key (keys %perlvar) {
       my $value=$perlvar{$key};
-      print(OUT &lt;&lt;END) unless $perlvarstat{$key};
+      print(OUT &lt;&lt;END) unless $perlvarstatic{$key};
 PerlSetVar     $key      $value
 END
     }
@@ -451,48 +465,92 @@ while (!$flag) {
   print "ENTER 1, 2, 3, or 4:\n";
   my $choice=&lt;&gt;;
   chomp($choice);
+  $line2insert=&lt;&lt;END;
+$perlvar{'lonHostID'}:$perlvar{'lonDefDomain'}:$perlvar{'lonRole'}:$hostname:$hostaddress
+END
+  $date=`date -I`; chomp($date);
+  $lonHostID=$perlvar{'lonHostID'};
+  $lonHostID=~s/\W//g;
+  $lineexistflag=0;
+  $hostidexistflag=0;
   if ($choice==1) {
-    $lonCluster='production';
-    `rm -f ../hosts.tab`;
-    `ln -s production_hosts.tab ../hosts.tab`;
-    $flag=1;
+    $lonCluster='production'; $flag=1;
   }
   elsif ($choice==2) {
-    $lonCluster='standalone';
-    open(OUT,'&gt;../standalone_hosts.tab') or
-      die("cannot open loncom/standalone_hosts.tab for output\n");
-    print(OUT &lt;&lt;END);
-$perlvar{'lonHostID'}:$perlvar{'lonDefDomain'}:$perlvar{'lonRole'}:$hostname:$hostaddress
-END
+    $lonCluster='standalone'; $flag=1;
+    open(OUT,'&gt;../'.$lonCluster.'_hosts.tab') or
+      die('file generation error');
+      print(OUT $line2insert);
     close(OUT);
-    `rm -f ../hosts.tab`;
-    `ln -s standalone_hosts.tab ../hosts.tab`;
-    $flag=1;
   }
   elsif ($choice==3) {
-    $lonCluster='development';
-    `rm -f loncom/hosts.tab`;
-    `ln -s development_hosts.tab ../hosts.tab`;
-    $flag=1;
+    $lonCluster='development'; $flag=1;
   }
   elsif ($choice==4) {
-    $lonCluster='existing';
-    `rm -f ../hosts.tab`;
-    `touch existing_hosts.tab`;
+    $lonCluster='existing'; $flag=1;
     if (-e '/home/httpd/lonTabs/hosts.tab') {
       `cp /home/httpd/lonTabs/hosts.tab ../existing_hosts.tab`;
     }
-    `ln -s existing_hosts.tab ../hosts.tab`;
-    $flag=1;
+    else {
+      print &lt;&lt;END;
+There is no existing /home/httpd/lonTabs/hosts.tab
+END
+      die('');
+    }
   }
   elsif ($choice==26) {
-    $lonCluster='rawhide';
-    `rm -f ../hosts.tab`;
-    `ln -s rawhide_hosts.tab ../hosts.tab`;
-    $flag=1;
+    $lonCluster='rawhide'; $flag=1;
   }
-  else {
-
+  if ($flag==1) {
+    `rm -f ../hosts.tab`;
+    open(IN,'&lt;../'.$lonCluster.'_hosts.tab');
+    while(&lt;IN&gt;) {
+      if (/^$line2insert$/) {
+        $lineexistflag=1;
+      }
+      if (/^$lonHostID\:/) {
+        $hostidexistflag=1;
+      }
+    }
+    close(IN);
+    if ($hostidexistflag and !$lineexistflag) {
+      print &lt;&lt;END;
+WARNING: $lonHostID already exists inside
+loncapa/loncom/${lonCluster}_hosts.tab.  The entry inside
+${lonCluster}_hosts.tab does not match your settings.
+The entry inside ${lonCluster}_hosts.tab is being replaced
+with your new values.
+END
+      `grep -v "$lonHostID:" ../${lonCluster}_hosts.tab &gt; ../new_${lonCluster}_hosts.tab`;
+       open(OUT,'&gt;&gt;../new_'.$lonCluster.'_hosts.tab') or
+         die("cannot open loncom/${lonCluster}_hosts.tab for output\n");
+         print(OUT $line2insert);
+       close(OUT);
+      `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
+      # email appropriate message
+      `echo "REPLACE:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "REPLACE:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
+    }
+    elsif ($hostidexistflag and $lineexistflag) {
+      print &lt;&lt;END;
+Entry exists in ${lonCluster}_hosts.tab.
+END
+      `ln -s ${lonCluster}_hosts.tab ../hosts.tab`;
+      # email appropriate message
+      `echo "STABLEUPDATE:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "STABLEUPDATE:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
+    }
+    elsif (!$hostidexistflag and !$lineexistflag) {
+      print &lt;&lt;END;
+New entry for $lonCluster.
+END
+      `cat ../${lonCluster}_hosts.tab &gt; ../new_${lonCluster}_hosts.tab`;
+       open(OUT,'&gt;../new_'.$lonCluster.'_hosts.tab') or
+         die("cannot open loncom/${lonCluster}_hosts.tab for output\n");
+         print(OUT $line2insert);
+       close(OUT);
+      `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
+      # email appropriate message
+      `echo "INSERT:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "INSERT:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
+    }
   }
 }