[BACK]Return to updatequery.piml CVS log [TXT] [DIR] Up to [LON-CAPA] / doc / loncapafiles

Diff for /doc/loncapafiles/updatequery.piml between versions 1.15 and 1.21

version 1.15, 2002/06/09 23:31:09 version 1.21, 2002/12/09 18:54:40
Line 55  sleep(3); Line 55  sleep(3);
 <target dist='default'>/home/httpd/lonTabs/hosts.tab</target>  <target dist='default'>/home/httpd/lonTabs/hosts.tab</target>
 <perlscript mode='fg'>  <perlscript mode='fg'>
 $|=1;  $|=1;
   my $domainDescription;
 unless (-e "<TARGET />") {  unless (-e "<TARGET />") {
   print(&lt;&lt;END);    print(&lt;&lt;END);
            WELCOME TO LON-CAPA!             WELCOME TO LON-CAPA!
Line 145  END Line 146  END
 }  }
   my $choice=&lt;&gt;;    my $choice=&lt;&gt;;
   chomp($choice);    chomp($choice);
     my $bad_domain_flag=0;
     my @bad_domain_names=('raw','userfiles','priv','adm','uploaded');
     foreach my $bad (@bad_domain_names) {
       $bad_domain_flag=1 if $choice eq $bad;
     }
   if ($ipdomain and $choice=~/^\s*$/) {    if ($ipdomain and $choice=~/^\s*$/) {
     $choice=$ipdomain;      $choice=$ipdomain;
     open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');      open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
Line 161  END Line 167  END
     $r='l';      $r='l';
     $flag=1;      $flag=1;
   }    }
     elsif ($bad_domain_flag) {
       print "Invalid input ('$choice' conflicts with LON-CAPA namespace).\n";
       print "Please try something different than '$choice'\n";
     }
   else {    else {
     print "Invalid input (only alphanumeric characters supported).\n";      print "Invalid input (only alphanumeric characters supported).\n";
   }    }
 }  }
   
   
   # get domain description
   # accept if valid, if not valid, tell user and repeat
   $flag=0;
   
   while (!$flag) {
     print(&lt;&lt;END);
   
   **** Domain Description ****
   String describing the domain, to be shown to users.
   [Example, msu is Michigan State University]
   ENTER DOMAIN DESCRIPTION:
   END
   
     my $choice=&lt;&gt;;
     chomp($choice);
     if ($choice!~/:/) {
       open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
       print(OUT 'domainDescription'."\t".$choice."\n");
       close(OUT);
       $domainDescription=$choice;
       $flag=1;
     }
     else {
       print "Invalid input (no ':' allowed).\n";
     }
   }
   
 my $lonHostID;  my $lonHostID;
 if ($lonDefDomain) {  if ($lonDefDomain) {
   $lonHostID=$lonDefDomain.$r.int(1+rand(9)); # should be probably also detect    $lonHostID=$lonDefDomain.$r.int(1+rand(9)); # should be probably also detect
Line 264  my %perlvar; Line 302  my %perlvar;
     $perlvar{'lonDefDomain'}=$lonDefDomain;      $perlvar{'lonDefDomain'}=$lonDefDomain;
     $perlvar{'lonAdmEMail'}=$lonAdmEMail;      $perlvar{'lonAdmEMail'}=$lonAdmEMail;
     $perlvar{'lonRole'}=$lonRole;      $perlvar{'lonRole'}=$lonRole;
     unless ($perlvar{'lonSqlAccess'}) {      unless ($perlvar{'lonLoadLim'} and $perlvar{'lonLoadLim'}!~/\{\[\[\[\[/) {
        $perlvar{'lonSqlAccess'}='localhostkey';  
     }  
     unless ($perlvar{'lonLoadLim'}) {  
        $perlvar{'lonLoadLim'}='2.00';         $perlvar{'lonLoadLim'}='2.00';
     }      }
     unless ($perlvar{'lonExpire'}) {      unless ($perlvar{'lonExpire'} and $perlvar{'lonExpire'}!~/\{\[\[\[\[/) {
        $perlvar{'lonExpire'}='86400';         $perlvar{'lonExpire'}='86400';
     }      }
     unless ($perlvar{'lonReceipt'}) {      unless ($perlvar{'lonReceipt'} and $perlvar{'lonReceipt'}!~/\{\[\[\[\[/) {
        my $lonReceipt='';         my $lonReceipt='';
        srand(time ^ $$ ^ unpack "%L*", `ps axww | gzip`);         srand(time ^ $$ ^ unpack "%L*", `ps axww | gzip`);
        my @alnum=(0..9,a..z);         my @alnum=(0..9,a..z);
Line 313  my %perlvar; Line 348  my %perlvar;
  }   }
  close(CONFIG);   close(CONFIG);
     }      }
       unless ($perlvar{'lonLoadLim'} and $perlvar{'lonLoadLim'}!~/\{\[\[\[\[/) {
          $perlvar{'lonLoadLim'}='2.00';
       }
       unless ($perlvar{'lonExpire'} and $perlvar{'lonExpire'}!~/\{\[\[\[\[/) {
          $perlvar{'lonExpire'}='86400';
       }
       unless ($perlvar{'lonReceipt'} and $perlvar{'lonReceipt'}!~/\{\[\[\[\[/) {
          my $lonReceipt='';
          srand(time ^ $$ ^ unpack "%L*", `ps axww | gzip`);
          my @alnum=(0..9,a..z);
          foreach my $i (1..20) {
    $lonReceipt.=$alnum[int(rand(36))];
          }
          $perlvar{'lonReceipt'}=$lonReceipt;
       }
 my %perlvarstatic;  my %perlvarstatic;
     if (-e "${confdir}loncapa_apache.conf") {      if (-e "${confdir}loncapa_apache.conf") {
  open(CONFIG,'&lt;'.$confdir.'loncapa_apache.conf') or    open(CONFIG,'&lt;'.$confdir.'loncapa_apache.conf') or 
Line 330  my %perlvarstatic; Line 380  my %perlvarstatic;
 # update loncapa.conf until 7 is entered  # update loncapa.conf until 7 is entered
   
 $flag=0;  $flag=0;
   
 while (!$flag) {  while (!$flag) {
   print(&lt;&lt;END);    print(&lt;&lt;END);
   
 ===============================================================================  ===============================================================================
 This is now the current configuration of your machine.  This is now the current configuration of your machine.
 1) Domain Name: $perlvar{'lonDefDomain'}  1) Domain Name: $perlvar{'lonDefDomain'}
 2) Machine Name: $perlvar{'lonHostID'}  2) Domain Description: $domainDescription
 3) System Administrator's E-mail Address: $perlvar{'lonAdmEMail'}  3) Machine Name: $perlvar{'lonHostID'}
 4) Role: $perlvar{'lonRole'}  4) System Administrator's E-mail Address: $perlvar{'lonAdmEMail'}
 5) Cache Expiration Time: $perlvar{'lonExpire'}  5) Role: $perlvar{'lonRole'}
 6) Server Load: $perlvar{'lonLoadLim'}  6) Cache Expiration Time: $perlvar{'lonExpire'}
 7) Everything is correct up above  7) Server Load: $perlvar{'lonLoadLim'}
 END  8) Everything is correct up above
   END
   my $hbug=-1;
   my $dbug=-1;
   {
     my $v=$perlvar{'lonHostID'};
     $hbug=0;
     $hbug=1 if $v=~/\W/;
     $hbug=1 if $v=~/\_/;
   }
   {
     my $v=$1;
     $dbug=0;
     $dbug=1 if $v=~/\W/;
     $dbug=1 if $v=~/\_/;
   }
   
   if ($hbug) {
     print "**** ERROR **** ".
    "Invalid lonHostID (should only be letters and/or digits)\n";
   }
   if ($dbug) {
     print "**** ERROR **** ".
    "Invalid lonDefDomain (should only be letters and/or digits)\n";
   }
   
   print(&lt;&lt;END);    print(&lt;&lt;END);
 ENTER A CHOICE OF 1-6 TO CHANGE, otherwise ENTER 7:  ENTER A CHOICE OF 1-7 TO CHANGE, otherwise ENTER 8:
 END  END
 my $choice=&lt;&gt;;  my $choice=&lt;&gt;;
 chomp($choice);  chomp($choice);
   if ($choice==1) {    if ($choice==1) {
   print(&lt;&lt;END);    print(&lt;&lt;END);
 2) Domain Name: $perlvar{'lonDefDomain'}  1) Domain Name: $perlvar{'lonDefDomain'}
 ENTER NEW VALUE:  ENTER NEW VALUE (this is an internal value used to identify a group of
                    LON-CAPA machines, it must be alphanumerical, we suggest
                    using a part of your actual DNS domain. For example, for
                    the machine loncapa.msu.edu, we set the Domain to msu):
 END  END
     my $choice2=&lt;&gt;;      my $choice2=&lt;&gt;;
     chomp($choice2);      chomp($choice2);
Line 359  END Line 438  END
   }    }
   elsif ($choice==2) {    elsif ($choice==2) {
   print(&lt;&lt;END);    print(&lt;&lt;END);
 1) Machine Name: $perlvar{'lonHostID'}  2) Domain Description: $domainDescription
 ENTER NEW VALUE:  ENTER NEW VALUE (this should be a string that describes your domain, spaces
                    and punctuation are fine except for ':'):
 END  END
     my $choice2=&lt;&gt;;      my $choice2=&lt;&gt;;
     chomp($choice2);      chomp($choice2);
     $perlvar{'lonHostID'}=$choice2;      $domainDescription=$choice2;
   }    }
   elsif ($choice==3) {    elsif ($choice==3) {
   print(&lt;&lt;END);    print(&lt;&lt;END);
 3) System Administrator's E-mail Address: $perlvar{'lonAdmEMail'}  3) Machine Name: $perlvar{'lonHostID'}
 ENTER NEW VALUE:  ENTER NEW VALUE (this will be the name of the machine in the LON-CAPA network
                    it cannot contain any of '_' '-' '.' or ':'. We suggest that
                    if you are in the domain 'example' and are the first library
                    server you enter 'examplel1') :
 END  END
     my $choice2=&lt;&gt;;      my $choice2=&lt;&gt;;
     chomp($choice2);      chomp($choice2);
     $perlvar{'lonAdmEMail'}=$choice2;      $perlvar{'lonHostID'}=$choice2;
   }    }
   elsif ($choice==4) {    elsif ($choice==4) {
   print(&lt;&lt;END);    print(&lt;&lt;END);
 4) Role: $perlvar{'lonRole'}  4) System Administrator's E-mail Address: $perlvar{'lonAdmEMail'}
 ENTER NEW VALUE:  ENTER NEW VALUE:
 END  END
     my $choice2=&lt;&gt;;      my $choice2=&lt;&gt;;
     chomp($choice2);      chomp($choice2);
     $perlvar{'lonRole'}=$choice2;      $perlvar{'lonAdmEMail'}=$choice2;
   }    }
   elsif ($choice==5) {    elsif ($choice==5) {
   print(&lt;&lt;END);    print(&lt;&lt;END);
 5) Cache Expiration Time: $perlvar{'lonExpire'}  5) Role: $perlvar{'lonRole'}
 ENTER NEW VALUE:  ENTER NEW VALUE (this should be either 'access' or 'library' 
                    if in doubt select 'library'):
 END  END
     my $choice2=&lt;&gt;;      my $choice2=&lt;&gt;;
     chomp($choice2);      chomp($choice2);
     $perlvar{'lonExpire'}=$choice2;      $perlvar{'lonRole'}=$choice2;
   }    }
   elsif ($choice==6) {    elsif ($choice==6) {
   print(&lt;&lt;END);    print(&lt;&lt;END);
 6) Server Load: $perlvar{'lonLoadLim'}  6) Cache Expiration Time: $perlvar{'lonExpire'}
   ENTER NEW VALUE (in seconds, 86400 is a reasonable value):
   END
       my $choice2=&lt;&gt;;
       chomp($choice2);
       $perlvar{'lonExpire'}=$choice2;
     }
     elsif ($choice==7) {
     print(&lt;&lt;END);
   7) Server Load: $perlvar{'lonLoadLim'}
 ENTER NEW VALUE:  ENTER NEW VALUE:
 END  END
     my $choice2=&lt;&gt;;      my $choice2=&lt;&gt;;
     chomp($choice2);      chomp($choice2);
     $perlvar{'lonLoadLim'}=$choice2;      $perlvar{'lonLoadLim'}=$choice2;
   }    }
   elsif ($choice==7) {    elsif ($choice==8) {
     $flag=1;      $flag=1;
   }    }
   else {    else {
Line 448  END Line 541  END
 # if valid then process, otherwise loop  # if valid then process, otherwise loop
 my $hostname=`hostname`;chomp($hostname);  my $hostname=`hostname`;chomp($hostname);
 my $hostaddress=`hostname -i $hostname`;chomp($hostaddress);  my $hostaddress=`hostname -i $hostname`;chomp($hostaddress);
   $hostaddress=~s/\s//;
 $flag=0;  $flag=0;
 while (!$flag) {  while (!$flag) {
   print "ENTER 1, 2, 3, or 4:\n";    print "ENTER 1, 2, 3, or 4:\n";
   my $choice=&lt;&gt;;    my $choice=&lt;&gt;;
   chomp($choice);    chomp($choice);
   $line2insert=&lt;&lt;END;    $line2insert=&lt;&lt;END;
 $perlvar{'lonHostID'}:$perlvar{'lonDefDomain'}:$perlvar{'lonRole'}:$hostname:$hostaddress  $perlvar{'lonHostID'}:$perlvar{'lonDefDomain'}:$perlvar{'lonRole'}:$hostname:$hostaddress:$domainDescription
 END  END
   $date=`date -I`; chomp($date);    $date=`date -I`; chomp($date);
   $lonHostID=$perlvar{'lonHostID'};    $lonHostID=$perlvar{'lonHostID'};
Line 516  END Line 610  END
        close(OUT);         close(OUT);
       `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;        `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
       # email appropriate message        # email appropriate message
       `echo "REPLACE:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "REPLACE:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;        system('ping -c 1 www.lon-capa.org > /dev/null || ping -c 1 www.msu.edu > /dev/null || ping -c 1 www.mit.edu > /dev/null');
         `echo "REPLACE:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "REPLACE:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org` unless $?;
     }      }
     elsif ($hostidexistflag and $lineexistflag) {      elsif ($hostidexistflag and $lineexistflag) {
       print &lt;&lt;END;        print &lt;&lt;END;
Line 531  END Line 626  END
 New entry for $lonCluster.  New entry for $lonCluster.
 END  END
       `cat ../${lonCluster}_hosts.tab &gt; ../new_${lonCluster}_hosts.tab`;        `cat ../${lonCluster}_hosts.tab &gt; ../new_${lonCluster}_hosts.tab`;
        open(OUT,'&gt;../new_'.$lonCluster.'_hosts.tab') or         open(OUT,'&gt;&gt;../new_'.$lonCluster.'_hosts.tab') or
          die("cannot open loncom/${lonCluster}_hosts.tab for output\n");           die("cannot open loncom/new_${lonCluster}_hosts.tab for output\n");
          print(OUT $line2insert);           print(OUT $line2insert);
        close(OUT);         close(OUT);
       `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;        `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
Removed from v.1.15  
changed lines
  Added in v.1.21

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>