[BACK]Return to updatequery.piml CVS log [TXT] [DIR] Up to [LON-CAPA] / doc / loncapafiles

Diff for /doc/loncapafiles/updatequery.piml between versions 1.19 and 1.41

version 1.19, 2002/09/08 23:57:51 version 1.41, 2005/08/15 17:53:33
Line 1 Line 1
 <!-- updatequery.piml -->  <!-- updatequery.piml -->
 <!-- Scott Harrison -->  
   
 <!-- $Id$ -->  <!-- $Id$ -->
   
Line 52  sleep(3); Line 51  sleep(3);
 </perlscript>  </perlscript>
 </file>  </file>
 <file>  <file>
   <target dist='default'>loncom/hosts.tab</target>
   <perlscript mode='fg'>
   unless (-l "<TARGET />") {
     print(&lt;&lt;END);
   
   ===============================================================================
   Which cluster option would you like to have installed?
   IMPORTANT: to take advantage of the cluster options 1) and 3),
   you must contact lon-capa\@lon-capa.org.
   
   1) PRODUCTION - you want to eventually connect this machine to the
                   LON-CAPA content sharing network. This setting is for
                   schools, colleges, and universities, that currently
                   are running - or in the future will run - courses
   2) STAND-ALONE - you want this machine to run in 'stand-alone' mode and
                    not be connected to other LON-CAPA machines for now
   3) DEVELOPMENT - you want to do software (not content!) development with
                    this workstation and eventually link it with the
                    workstations of other LON-CAPA software developers.
   4) RUNNING YOUR OWN CLUSTER - this machine is not in the standard LON-CAPA
                    clusters and won't be in the future and you want the existing
                    hosts.tab and domain.tab files to be left alone.
                    (This choice is unlikely what you want to select.)
   END
   # Option number 26 will install rawhide_hosts.tab, but
   # the typical user does not want to be part of an intensive
   # machine test cluster.
   
   # get input
   # if valid then process, otherwise loop
   $flag=0;
   while (!$flag) {
     print "ENTER 1, 2, 3, or 4:\n";
     my $choice=&lt;&gt;;
     chomp($choice);
     if ($choice==1) {
       $lonCluster='production'; $flag=1;
     }
     elsif ($choice==2) {
       $lonCluster='standalone'; $flag=1;
     }
     elsif ($choice==3) {
       $lonCluster='development'; $flag=1;
     }
     elsif ($choice==4) {
       $lonCluster='existing'; $flag=1;
       if (-e '/home/httpd/lonTabs/hosts.tab') {
         `cp /home/httpd/lonTabs/hosts.tab ../existing_hosts.tab`;
       }
       else {
         print &lt;&lt;END;
   There is no existing /home/httpd/lonTabs/hosts.tab
   END
         die('');
       }
       if (-e '/home/httpd/lonTabs/domain.tab') {
         `cp /home/httpd/lonTabs/domain.tab ../existing_domain.tab`;
       }
       else {
         print &lt;&lt;END;
   There is no existing /home/httpd/lonTabs/domain.tab
   END
         die('');
       }
     }
     elsif ($choice==26) {
       $lonCluster='rawhide'; $flag=1;
     }
   }
   }
   </perlscript>
   </file>
   <file>
 <target dist='default'>/home/httpd/lonTabs/hosts.tab</target>  <target dist='default'>/home/httpd/lonTabs/hosts.tab</target>
 <perlscript mode='fg'>  <perlscript mode='fg'>
 $|=1;  $|=1;
   my $domainDescription;
   my $domainTabExtras;
 unless (-e "<TARGET />") {  unless (-e "<TARGET />") {
   print(&lt;&lt;END);    print(&lt;&lt;END);
            WELCOME TO LON-CAPA!             WELCOME TO LON-CAPA!
   
 If you have questions, please visit http://install.lon-capa.org  If you have questions, please visit http://install.lon-capa.org
 or contact sharrison\@mail.lon-capa.org.  or contact helpdesk\@lon-capa.org.
   
 ===============================================================================  ===============================================================================
 The following 4 values are needed to configure LON-CAPA:  The following 4 values are needed to configure LON-CAPA:
Line 68  The following 4 values are needed to con Line 142  The following 4 values are needed to con
 * LON-CAPA Domain Name  * LON-CAPA Domain Name
 * LON-CAPA Machine ID Name, and  * LON-CAPA Machine ID Name, and
 * System Administration E-mail Address.  * System Administration E-mail Address.
   ===============================================================================
   
   In addition, a Support E-mail Address can also be included. If
   an address is included then one of the options in the LON-CAPA 
   help menu will be a link to a form that a user will complete to
   request LON-CAPA help.  
   
 END  END
   
 open(OUT,'&gt;/tmp/loncapa_updatequery.out');  open(OUT,'&gt;/tmp/loncapa_updatequery.out');
Line 115  while (!$flag) { Line 196  while (!$flag) {
 }  }
   
 # need to recommend a machine ID name (ipdomain.l.somenumber)  # need to recommend a machine ID name (ipdomain.l.somenumber)
 my $hostname=`hostname`; chomp($hostname);  my $hostname=`hostname -f`; chomp($hostname);
 my $ipdomain='';  my $ipdomain='';
 if ($hostname=~/([^\.]*)\.([^\.]*)$/) {  if ($hostname=~/([^\.]*)\.([^\.]*)$/) {
   $ipdomain=$1;    $ipdomain=$1;
Line 125  if ($hostname=~/([^\.]*)\.([^\.]*)$/) { Line 206  if ($hostname=~/([^\.]*)\.([^\.]*)$/) {
   
 **** Domain ****  **** Domain ****
 [this does NOT need to correspond to internet address domains,  [this does NOT need to correspond to internet address domains,
  examples might be "msu" or "bionet" or "vermontcc"]   good examples might be "msu" or "bionet" or "vermontcc",
    bad examples are "physics" (too general)
      or "michiganstateuniversity" (too long)
      or "msuedu" (internet domain, just make it "msu")
      or "msuphysics" (only if there is a good reason to limit)
      or "mydomain" (what is that?)
    Please make this name short AND descriptive of your organization.
    Note that the domain is very hard to change later.
    Double-check with the LON-CAPA group at MSU if this domain is 
    going to be part of the main production cluster, since it needs
    to be unique.]
 END  END
   
 # get domain name  # get domain name
Line 146  END Line 237  END
   my $choice=&lt;&gt;;    my $choice=&lt;&gt;;
   chomp($choice);    chomp($choice);
   my $bad_domain_flag=0;    my $bad_domain_flag=0;
   my @bad_domain_names=('raw','userfiles','priv','adm','uploaded');    my @bad_domain_names=('res','raw','userfiles','priv','adm','uploaded',
    'editupload');
   foreach my $bad (@bad_domain_names) {    foreach my $bad (@bad_domain_names) {
     $bad_domain_flag=1 if $choice eq $bad;      $bad_domain_flag=1 if $choice eq $bad;
   }    }
     if ($choice=~/capa/i) {
        $bad_domain_flag=1;
     }
   if ($ipdomain and $choice=~/^\s*$/) {    if ($ipdomain and $choice=~/^\s*$/) {
     $choice=$ipdomain;      $choice=$ipdomain;
     open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');      open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
Line 157  END Line 252  END
     close(OUT);      close(OUT);
     $lonDefDomain=$choice;      $lonDefDomain=$choice;
     $flag=1;      $flag=1;
   }    } elsif (length($choice)>12) {
   elsif ($choice!~/\_/ and $choice=~/^\w+$/) {      print "Name too long\n";
     } elsif (length($choice)<2) {
       print "Name too short\n";
     } elsif ($bad_domain_flag) {
       print "Invalid input ('$choice' conflicts with LON-CAPA namespace).\n";
       print "Please try something different than '$choice'\n";
     } elsif ($choice!~/\_/ and $choice=~/^\w+$/) {
     open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');      open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
     print(OUT 'lonDefDomain'."\t".$choice."\n");      print(OUT 'lonDefDomain'."\t".$choice."\n");
     close(OUT);      close(OUT);
     $lonDefDomain=$choice;      $lonDefDomain=$choice;
     $r='l';      $r='l';
     $flag=1;      $flag=1;
     } else {
       print "Invalid input (only alphanumeric characters supported).\n";
   }    }
   elsif ($bad_domain_flag) {  }
     print "Invalid input ('$choice' conflicts with LON-CAPA namespace).\n";  
     print "Please try something different than '$choice'\n";  
   # get domain description
   # accept if valid, if not valid, tell user and repeat
   $flag=0;
   
   while (!$flag) {
     print(&lt;&lt;END);
   
   **** Domain Description ****
   String describing the domain, to be shown to users.
   [Example, msu is Michigan State University]
   ENTER DOMAIN DESCRIPTION:
   END
   
     my $choice=&lt;&gt;;
     chomp($choice);
     if ($choice!~/:/) {
       open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
       print(OUT 'domainDescription'."\t".$choice."\n");
       close(OUT);
       $domainDescription=$choice;
       $flag=1;
   }    }
   else {    else {
     print "Invalid input (only alphanumeric characters supported).\n";      print "Invalid input (no ':' allowed).\n";
   }    }
 }  }
   
Line 187  if ($lonDefDomain) { Line 311  if ($lonDefDomain) {
 [this does NOT need to correspond to internet address names;  [this does NOT need to correspond to internet address names;
  this name MUST be unique to the whole LON-CAPA network;   this name MUST be unique to the whole LON-CAPA network;
  we recommend that you use a name based off of your institution;   we recommend that you use a name based off of your institution;
  good examples: "msul1" or "bionetl1";   good examples: "msul1" or "bioneta2";
  bad examples: "loncapabox" or "studentsinside"]   bad examples: "loncapabox" or "studentsinside".
    Note that machine names are very hard to change later.]
 END  END
 # get machine name  # get machine name
 # accept if valid, if not valid, tell user and repeat  # accept if valid, if not valid, tell user and repeat
Line 206  END Line 331  END
 }  }
   my $choice=&lt;&gt;;    my $choice=&lt;&gt;;
   chomp($choice);    chomp($choice);
   if ($lonHostID and $choice=~/^\s*$/) {    if ($choice=~/capa/i) {
       print "Invalid input (names containing 'capa' are reserved).\n";
     } elsif ($lonHostID and $choice=~/^\s*$/) {
     $choice=$lonHostID;      $choice=$lonHostID;
     open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');      open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
     print(OUT 'lonHostID'."\t".$choice."\n");      print(OUT 'lonHostID'."\t".$choice."\n");
     close(OUT);      close(OUT);
     $lonHostID=$choice;      $lonHostID=$choice;
     $flag=1;      $flag=1;
   }    } elsif (length($choice)>15) {
   elsif ($choice!~/\_/ and $choice=~/^\w+$/) {      print "Name too long\n";
     } elsif (length($choice)<4) {
       print "Name too short\n";
     } elsif ($choice!~/\_/ and $choice=~/^\w+$/) {
     open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');      open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
     print(OUT 'lonHostID'."\t".$choice."\n");      print(OUT 'lonHostID'."\t".$choice."\n");
     close(OUT);      close(OUT);
     $lonHostID=$choice;      $lonHostID=$choice;
     $flag=1;      $flag=1;
   }    } else {
   else {  
     print "Invalid input (only alphanumeric characters supported).\n";      print "Invalid input (only alphanumeric characters supported).\n";
   }    }
 }  }
   
 # get e-mail address  # get admin e-mail address
 # accept if valid, if not valid, tell user and repeat  # accept if valid, if not valid, tell user and repeat
 $flag=0;  $flag=0;
 my $lonAdmEMail;  my $lonAdmEMail;
Line 236  while (!$flag) { Line 365  while (!$flag) {
 **** System Administrator's E-mail ****  **** System Administrator's E-mail ****
 E-mail address of the person who will manage this machine  E-mail address of the person who will manage this machine
 [should be in the form somebody\@somewhere]  [should be in the form somebody\@somewhere]
 ENTER E-MAIL ADDRESS:  ENTER ADMIN E-MAIL ADDRESS:
 END  END
   
   my $choice=&lt;&gt;;    my $choice=&lt;&gt;;
Line 253  END Line 382  END
   }    }
 }  }
   
   
   # get support e-mail address
   # accept if valid, if not valid, tell user and repeat
   $flag=0;
   my $lonSupportEMail;
   while (!$flag) {
     print(&lt;&lt;END);
   
   **** Support E-mail ****
   E-mail address of the person who will receive 
   help requests from LON-CAPA users who access 
   the system via this server. If the address is left blank,
   then a help support form will not be displayed 
   as part of the help menu.
   [should be in the form somebody\@somewhere]
   ENTER SUPPORT E-MAIL ADDRESS:
   END
   
     my $choice=&lt;&gt;;
     chomp($choice);
     $choice =~ s/\s//g;
     if ( ($choice=~/\@/) || $choice eq '') {
       open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
       print(OUT 'lonSupportEMail'."\t".$choice."\n");
       close(OUT);
       $lonSupportEMail=$choice;
       $flag=1;
     }
     else {
       print "Invalid input (this either needs to be blank, or look like an e-mail address!).\n";
     }
   }
   
   
 # update loncapa.conf  # update loncapa.conf
 my $confdir='/etc/httpd/conf/';  my $confdir='/etc/httpd/conf/';
 #my $confdir='';  #my $confdir='';
Line 272  my %perlvar; Line 435  my %perlvar;
     $perlvar{'lonHostID'}=$lonHostID;      $perlvar{'lonHostID'}=$lonHostID;
     $perlvar{'lonDefDomain'}=$lonDefDomain;      $perlvar{'lonDefDomain'}=$lonDefDomain;
     $perlvar{'lonAdmEMail'}=$lonAdmEMail;      $perlvar{'lonAdmEMail'}=$lonAdmEMail;
       $perlvar{'lonSupportEMail'}=$lonSupportEMail;
     $perlvar{'lonRole'}=$lonRole;      $perlvar{'lonRole'}=$lonRole;
     unless ($perlvar{'lonLoadLim'} and $perlvar{'lonLoadLim'}!~/\{\[\[\[\[/) {      unless ($perlvar{'lonLoadLim'} and $perlvar{'lonLoadLim'}!~/\{\[\[\[\[/) {
        $perlvar{'lonLoadLim'}='2.00';         $perlvar{'lonLoadLim'}='2.00';
     }      }
       unless ($perlvar{'lonUserLoadLim'} and $perlvar{'lonUserLoadLim'}!~/\{\[\[\[\[/) {
          $perlvar{'lonUserLoadLim'}='0';
       }
     unless ($perlvar{'lonExpire'} and $perlvar{'lonExpire'}!~/\{\[\[\[\[/) {      unless ($perlvar{'lonExpire'} and $perlvar{'lonExpire'}!~/\{\[\[\[\[/) {
        $perlvar{'lonExpire'}='86400';         $perlvar{'lonExpire'}='86400';
     }      }
Line 303  END Line 470  END
 <file>  <file>
 <target dist='default'>/</target>  <target dist='default'>/</target>
 <perlscript mode='fg'>  <perlscript mode='fg'>
   sub securesetting {
       my (%perlvar)=@_;
       my $securestatus='unknown';
       my $securenum='';
       if      ( $perlvar{'loncAllowInsecure'}&&  $perlvar{'londAllowInsecure'}) {
    $securestatus='no';                  $securenum='4';
       } elsif ( $perlvar{'loncAllowInsecure'}&& !$perlvar{'londAllowInsecure'}) {
    $securestatus='lond';                $securenum='3';
       } elsif (!$perlvar{'loncAllowInsecure'}&&  $perlvar{'londAllowInsecure'}) {
    $securestatus='lonc';                $securenum='2';
       } elsif (!$perlvar{'loncAllowInsecure'}&& !$perlvar{'londAllowInsecure'}) {
    $securestatus='yes (lond and lonc)'; $securenum='1';
       }
       return ($securestatus,$securenum);
   }
 # read values from loncapa.conf  # read values from loncapa.conf
 my $confdir='/etc/httpd/conf/';  my $confdir='/etc/httpd/conf/';
 my $filename='loncapa.conf';  my $filename='loncapa.conf';
 my %perlvar;  my %perlvar;
   my ($securestatus,$securenum);
     if (-e "$confdir$filename") {      if (-e "$confdir$filename") {
  open(CONFIG,'&lt;'.$confdir.$filename) or    open(CONFIG,'&lt;'.$confdir.$filename) or 
           die("Can't read $confdir$filename");            die("Can't read $confdir$filename");
Line 322  my %perlvar; Line 505  my %perlvar;
     unless ($perlvar{'lonLoadLim'} and $perlvar{'lonLoadLim'}!~/\{\[\[\[\[/) {      unless ($perlvar{'lonLoadLim'} and $perlvar{'lonLoadLim'}!~/\{\[\[\[\[/) {
        $perlvar{'lonLoadLim'}='2.00';         $perlvar{'lonLoadLim'}='2.00';
     }      }
       unless ($perlvar{'lonUserLoadLim'} and $perlvar{'lonUserLoadLim'}!~/\{\[\[\[\[/) {
          $perlvar{'lonUserLoadLim'}='0';
       }
     unless ($perlvar{'lonExpire'} and $perlvar{'lonExpire'}!~/\{\[\[\[\[/) {      unless ($perlvar{'lonExpire'} and $perlvar{'lonExpire'}!~/\{\[\[\[\[/) {
        $perlvar{'lonExpire'}='86400';         $perlvar{'lonExpire'}='86400';
     }      }
       unless ($perlvar{'londAllowInsecure'} and $perlvar{'londAllowInsecure'}!~/\{\[\[\[\[/) {
          $perlvar{'londAllowInsecure'}='1';
       }
       unless ($perlvar{'loncAllowInsecure'} and $perlvar{'loncAllowInsecure'}!~/\{\[\[\[\[/) {
          $perlvar{'loncAllowInsecure'}='1';
       }
       ($securestatus,$securenum)=&securesetting(%perlvar);
     unless ($perlvar{'lonReceipt'} and $perlvar{'lonReceipt'}!~/\{\[\[\[\[/) {      unless ($perlvar{'lonReceipt'} and $perlvar{'lonReceipt'}!~/\{\[\[\[\[/) {
        my $lonReceipt='';         my $lonReceipt='';
        srand(time ^ $$ ^ unpack "%L*", `ps axww | gzip`);         srand(time ^ $$ ^ unpack "%L*", `ps axww | gzip`);
Line 347  my %perlvarstatic; Line 540  my %perlvarstatic;
  }   }
  close(CONFIG);   close(CONFIG);
     }      }
       if (!$domainDescription && $lonCluster ne 'existing') {
          open(IN,'&lt;../'.$lonCluster.'_domain.tab');
          while(&lt;IN&gt;) {
             if (/^$perlvar{'lonDefDomain'}\:/) {
        (undef,$domainDescription,$domainTabExtras)=split(/:/,$_,3);
        chomp($domainDescription);
        chomp($domainTabExtras);
                last;
             }
          }
          close(IN);
       }
       if (!$domainDescription) {
          open(IN,'&lt;/home/httpd/lonTabs/domain.tab');
          while(&lt;IN&gt;) {
             if (/^$perlvar{'lonDefDomain'}\:/) {
        (undef,$domainDescription,$domainTabExtras)=split(/:/,$_,3);
        chomp($domainDescription);
        chomp($domainTabExtras);
                last;
             }
          }
          close(IN);
       }
      
 # implement editing logic below, interactively  # implement editing logic below, interactively
 # update loncapa.conf until 7 is entered  # update loncapa.conf until 8 is entered
   
 $flag=0;  $flag=0;
   
Line 357  while (!$flag) { Line 575  while (!$flag) {
   
 ===============================================================================  ===============================================================================
 This is now the current configuration of your machine.  This is now the current configuration of your machine.
 1) Domain Name: $perlvar{'lonDefDomain'}   1) Domain Name: $perlvar{'lonDefDomain'}
 2) Machine Name: $perlvar{'lonHostID'}   2) Domain Description: $domainDescription
 3) System Administrator's E-mail Address: $perlvar{'lonAdmEMail'}   3) Machine Name: $perlvar{'lonHostID'}
 4) Role: $perlvar{'lonRole'}   4) System Administrator's E-mail Address: $perlvar{'lonAdmEMail'}
 5) Cache Expiration Time: $perlvar{'lonExpire'}   5) Support E-mail Address: $perlvar{'lonSupportEMail'}
 6) Server Load: $perlvar{'lonLoadLim'}   6) Role: $perlvar{'lonRole'}
 7) Everything is correct up above   7) Cache Expiration Time: $perlvar{'lonExpire'}
 END   8) Server Load: $perlvar{'lonLoadLim'}
 my $hbug=-1;   9) User Load: $perlvar{'lonUserLoadLim'}
 my $dbug=-1;  10) Allow only secure connections: $securestatus 
 {  11) Everything is correct up above
   my $v=$perlvar{'lonHostID'};  END
   $hbug=0;  
   $hbug=1 if $v=~/\W/;  my $error='';
   $hbug=1 if $v=~/\_/;  foreach my $v ($perlvar{'lonDefDomain'},$perlvar{'lonHostID'}) {
 }     if (length($v)>16) { $error.="\nName $v too long"; }
 {     if (length($v)<2) { $error.="\nName $v too short"; }
   my $v=$1;     if ($v=~/capa/i) {
   $dbug=0;   if ($v!~/^oucapa\d+$/ && 
   $dbug=1 if $v=~/\W/;      ($v!~/^capa\d+$/ && $perlvar{'lonDefDomain'} eq 'uwsp')) {
   $dbug=1 if $v=~/\_/;   $error.="\nName $v contains 'capa'"; 
 }   }
      }
 if ($hbug) {     foreach my $bad ('res','raw','userfiles','priv','adm','uploaded',
   print "**** ERROR **** ".   'editupload') {
  "Invalid lonHostID (should only be letters and/or digits)\n";        $error.="\nName $v reserved." if $v eq $bad;
 }     }
 if ($dbug) {     if ($v=~/\W/) { $error.="\nName $v contains special characters"; }
   print "**** ERROR **** ".  }
  "Invalid lonDefDomain (should only be letters and/or digits)\n";  if ($domainDescription!~/^[\(\)\-\w\s]+$/) {
      $error.="\nDomain Description contains special characters";
   } 
   foreach my $v ($perlvar{'lonExpire'},$perlvar{'lonLoadLim'}) {
      unless ($v=~/^[\d+\.]+$/) { $error.="\nNumber expected instead of $v"; }
 }  }
   unless (($perlvar{'lonRole'} eq 'library') || ($perlvar{'lonRole'} eq 'access')) {
      $error.="\nInvalid Role";
   }
   if ($error) { print "\n*** ERRORS: $error\n"; }
   print(&lt;&lt;END);    print(&lt;&lt;END);
 ENTER A CHOICE OF 1-6 TO CHANGE, otherwise ENTER 7:  ENTER A CHOICE OF 1-10 TO CHANGE, otherwise ENTER 11:
 END  END
 my $choice=&lt;&gt;;  my $choice=&lt;&gt;;
 chomp($choice);  chomp($choice);
   if ($choice==1) {    if ($choice==1) {
   print(&lt;&lt;END);    print(&lt;&lt;END);
 1) Domain Name: $perlvar{'lonDefDomain'}  1) Domain Name: $perlvar{'lonDefDomain'}
 ENTER NEW VALUE:  ENTER NEW VALUE (this is an internal value used to identify a group of
                    LON-CAPA machines, it must be alphanumerical, we suggest
                    using a part of your actual DNS domain. For example, for
                    the machine loncapa.msu.edu, we set the Domain to msu):
 END  END
     my $choice2=&lt;&gt;;      my $choice2=&lt;&gt;;
     chomp($choice2);      chomp($choice2);
Line 405  END Line 633  END
   }    }
   elsif ($choice==2) {    elsif ($choice==2) {
   print(&lt;&lt;END);    print(&lt;&lt;END);
 2) Machine Name: $perlvar{'lonHostID'}  2) Domain Description: $domainDescription
 ENTER NEW VALUE:  ENTER NEW VALUE (this should be a string that describes your domain, spaces
                    and punctuation are fine except for ':'):
 END  END
     my $choice2=&lt;&gt;;      my $choice2=&lt;&gt;;
     chomp($choice2);      chomp($choice2);
     $perlvar{'lonHostID'}=$choice2;      $domainDescription=$choice2;
   }    }
   elsif ($choice==3) {    elsif ($choice==3) {
   print(&lt;&lt;END);    print(&lt;&lt;END);
 3) System Administrator's E-mail Address: $perlvar{'lonAdmEMail'}  3) Machine Name: $perlvar{'lonHostID'}
 ENTER NEW VALUE:  ENTER NEW VALUE (this will be the name of the machine in the LON-CAPA network
                    it cannot contain any of '_' '-' '.' or ':'. We suggest that
                    if you are in the domain 'example' and are the first library
                    server you enter 'examplel1') :
 END  END
     my $choice2=&lt;&gt;;      my $choice2=&lt;&gt;;
     chomp($choice2);      chomp($choice2);
     $perlvar{'lonAdmEMail'}=$choice2;      $perlvar{'lonHostID'}=$choice2;
   }    }
   elsif ($choice==4) {    elsif ($choice==4) {
   print(&lt;&lt;END);    print(&lt;&lt;END);
 4) Role: $perlvar{'lonRole'}  4) System Administrator's E-mail Address: $perlvar{'lonAdmEMail'}
 ENTER NEW VALUE:  ENTER NEW VALUE:
 END  END
     my $choice2=&lt;&gt;;      my $choice2=&lt;&gt;;
     chomp($choice2);      chomp($choice2);
     $perlvar{'lonRole'}=$choice2;      $perlvar{'lonAdmEMail'}=$choice2;
   }    }
   elsif ($choice==5) {    elsif ($choice==5) {
   print(&lt;&lt;END);    print(&lt;&lt;END);
 5) Cache Expiration Time: $perlvar{'lonExpire'}  5) Support E-mail Address: $perlvar{'lonSupportEMail'}
 ENTER NEW VALUE:  ENTER NEW VALUE:
 END  END
     my $choice2=&lt;&gt;;      my $choice2=&lt;&gt;;
     chomp($choice2);      chomp($choice2);
     $perlvar{'lonExpire'}=$choice2;      $perlvar{'lonSupportEMail'}=$choice2;
   }    }
   elsif ($choice==6) {    elsif ($choice==6) {
   print(&lt;&lt;END);    print(&lt;&lt;END);
 6) Server Load: $perlvar{'lonLoadLim'}  6) Role: $perlvar{'lonRole'}
   ENTER NEW VALUE (this should be either 'access' or 'library' 
                    if in doubt select 'library'):
   END
       my $choice2=&lt;&gt;;
       chomp($choice2);
       $perlvar{'lonRole'}=$choice2;
     }
     elsif ($choice==7) {
     print(&lt;&lt;END);
   7) Cache Expiration Time: $perlvar{'lonExpire'}
   ENTER NEW VALUE (in seconds, 86400 is a reasonable value):
   END
       my $choice2=&lt;&gt;;
       chomp($choice2);
       $perlvar{'lonExpire'}=$choice2;
     }
     elsif ($choice==8) {
     print(&lt;&lt;END);
   8) Server Load: $perlvar{'lonLoadLim'}
 ENTER NEW VALUE:  ENTER NEW VALUE:
 END  END
     my $choice2=&lt;&gt;;      my $choice2=&lt;&gt;;
     chomp($choice2);      chomp($choice2);
     $perlvar{'lonLoadLim'}=$choice2;      $perlvar{'lonLoadLim'}=$choice2;
   }    }
   elsif ($choice==7) {    elsif ($choice==9) {
     print(&lt;&lt;END);
   9) User Load: $perlvar{'lonUserLoadLim'}
   Numer of users that can login before machine is 'overloaded'
   ENTER NEW VALUE (integer value, 0 means there is no limit):
   END
       my $choice2=&lt;&gt;;
       chomp($choice2);
       $perlvar{'lonUserLoadLim'}=$choice2;
     }
     elsif ($choice==10) {
     print(&lt;&lt;END);
   10) Allow only secure connections: $securestatus 
   The Lon-CAPA communication daemons lonc and lond can be configured to
   allow only secure connections by default.
   
   POSSIBLE CHOICES:
   1) allow only secure connections and don't connect to machines that
       can not be connected to securely
   2) allow only secure connections but allow this machine to connect to 
       machines that don't support secure connections
   3) allow insecure connections to this machine but only allow connections
       to machines that support secure connections
   4) allow insecure connections
   ENTER NEW VALUE (currenly $securenum):
   END
       my $choice2=&lt;&gt;;
       chomp($choice2);
       if      ($choice2 eq '1') {
    $perlvar{'loncAllowInsecure'}=0;$perlvar{'londAllowInsecure'}=0;
       } elsif ($choice2 eq '2') {
    $perlvar{'loncAllowInsecure'}=0;$perlvar{'londAllowInsecure'}=1;
       } elsif ($choice2 eq '3') {
    $perlvar{'loncAllowInsecure'}=1;$perlvar{'londAllowInsecure'}=0;
       } elsif ($choice2 eq '4') {
    $perlvar{'loncAllowInsecure'}=1;$perlvar{'londAllowInsecure'}=1;
       }
       ($securestatus,$securenum)=&securesetting(%perlvar);
     }
     elsif (($choice==11) && (!$error)) {
     $flag=1;      $flag=1;
   }    }
   else {    else {
       print "Invalid input.\n";
   }    }
 }  }
     open(OUT,"&gt;$confdir$filename") or      open(OUT,"&gt;$confdir$filename") or
Line 470  END Line 760  END
 <target dist='default'>loncom/hosts.tab</target>  <target dist='default'>loncom/hosts.tab</target>
 <perlscript mode='fg'>  <perlscript mode='fg'>
 unless (-l "<TARGET />") {  unless (-l "<TARGET />") {
   print(&lt;&lt;END);    my $hostname=`hostname -f`;chomp($hostname);
   
 ===============================================================================  
 What hosts.tab would you like to have installed?  
 (hosts.tab is a listing of all other internet machines  
 that a server system considers to be valid server systems  
 on the LON-CAPA network)  
   
 1) PRODUCTION - you want to deliver courses today or sometime very soon  
                 on this machine  
 2) STAND-ALONE - you want this machine to run in 'stand-alone' mode and  
                  not be connected to other LON-CAPA machines for now  
 3) DEVELOPMENT - you want to play with or explore LON-CAPA  
 4) PRESERVE the existing hosts.tab (/home/httpd/lonTabs/hosts.tab)  
   
 END  
 # Option number 26 will install rawhide_hosts.tab, but  
 # the typical user does not want to be part of an intensive  
 # machine test cluster.  
   
 # get input  
 # if valid then process, otherwise loop  
 my $hostname=`hostname`;chomp($hostname);  
 my $hostaddress=`hostname -i $hostname`;chomp($hostaddress);  
 $flag=0;  
 while (!$flag) {  
   print "ENTER 1, 2, 3, or 4:\n";  
   my $choice=&lt;&gt;;  
   chomp($choice);  
   $line2insert=&lt;&lt;END;  
 $perlvar{'lonHostID'}:$perlvar{'lonDefDomain'}:$perlvar{'lonRole'}:$hostname:$hostaddress  
 END  
   $date=`date -I`; chomp($date);    $date=`date -I`; chomp($date);
   $lonHostID=$perlvar{'lonHostID'};    $lonHostID=$perlvar{'lonHostID'};
   $lonHostID=~s/\W//g;    $lonHostID=~s/\W//g;
   $lineexistflag=0;    $lineexistflag=0;
   $hostidexistflag=0;    $hostidexistflag=0;
   if ($choice==1) {    $line2insert=&lt;&lt;END;
     $lonCluster='production'; $flag=1;  $perlvar{'lonHostID'}:$perlvar{'lonDefDomain'}:$perlvar{'lonRole'}:$hostname
   }  END
   elsif ($choice==2) {    $domaininsert="$perlvar{'lonDefDomain'}:$domainDescription:$domainTabExtras\n";
     $lonCluster='standalone'; $flag=1;    if ($lonCluster eq 'standalone') {
     open(OUT,'&gt;../'.$lonCluster.'_hosts.tab') or      open(OUT,'&gt;../'.$lonCluster.'_hosts.tab') or
       die('file generation error');        die('file generation error');
       print(OUT $line2insert);        print(OUT $line2insert);
     close(OUT);      close(OUT);
   }      open(OUT,'&gt;../'.$lonCluster.'_domain.tab') or
   elsif ($choice==3) {        die('file generation error');
     $lonCluster='development'; $flag=1;        print(OUT $domaininsert);
   }      close(OUT);
   elsif ($choice==4) {  
     $lonCluster='existing'; $flag=1;  
     if (-e '/home/httpd/lonTabs/hosts.tab') {  
       `cp /home/httpd/lonTabs/hosts.tab ../existing_hosts.tab`;  
     }  
     else {  
       print &lt;&lt;END;  
 There is no existing /home/httpd/lonTabs/hosts.tab  
 END  
       die('');  
     }  
   }  
   elsif ($choice==26) {  
     $lonCluster='rawhide'; $flag=1;  
   }    }
   if ($flag==1) {    if ($flag==1) {
     `rm -f ../hosts.tab`;      `rm -f ../hosts.tab`;
Line 562  END Line 807  END
        close(OUT);         close(OUT);
       `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;        `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
       # email appropriate message        # email appropriate message
       system('ping -c 1 www.lon-capa.org > /dev/null || ping -c 1 www.msu.edu > /dev/null || ping -c 1 www.mit.edu > /dev/null');        `echo "REPLACE:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "REPLACE:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
       `echo "REPLACE:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "REPLACE:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org` unless $?;  
     }      }
     elsif ($hostidexistflag and $lineexistflag) {      elsif ($hostidexistflag and $lineexistflag) {
       print &lt;&lt;END;        print &lt;&lt;END;
Line 578  END Line 822  END
 New entry for $lonCluster.  New entry for $lonCluster.
 END  END
       `cat ../${lonCluster}_hosts.tab &gt; ../new_${lonCluster}_hosts.tab`;        `cat ../${lonCluster}_hosts.tab &gt; ../new_${lonCluster}_hosts.tab`;
        open(OUT,'&gt;../new_'.$lonCluster.'_hosts.tab') or         open(OUT,'&gt;&gt;../new_'.$lonCluster.'_hosts.tab') or
          die("cannot open loncom/${lonCluster}_hosts.tab for output\n");           die("cannot open loncom/new_${lonCluster}_hosts.tab for output\n");
          print(OUT $line2insert);           print(OUT $line2insert);
        close(OUT);         close(OUT);
       `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;        `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
Line 587  END Line 831  END
       `echo "INSERT:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "INSERT:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;        `echo "INSERT:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "INSERT:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
     }      }
   }    }
 }    $lineexistflag=0;
     if ($flag==1) {
       `rm -f ../domain.tab`;
       open(IN,'&lt;../'.$lonCluster.'_domain.tab');
       while(&lt;IN&gt;) {
         if (/^$domaininsert$/) {
           $lineexistflag=1;
         }
         if (/^$perlvar{'lonDefDomain'}\:/) {
           $domainexistflag=1;
         }
       }
       close(IN);
       if ($domainexistflag and !$lineexistflag) {
         print &lt;&lt;END;
   WARNING: $perlvar{'lonDefDomain'} already exists inside
   loncapa/loncom/${lonCluster}_domain.tab.  The entry inside
   ${lonCluster}_domain.tab does not match your settings.
   The entry inside ${lonCluster}_domain.tab is being replaced
   with your new values.
   END
         `grep -v "$perlvar{'lonDefDomain'}:" ../${lonCluster}_domain.tab &gt; ../new_${lonCluster}_domain.tab`;
          open(OUT,'&gt;&gt;../new_'.$lonCluster.'_domain.tab') or
            die("cannot open loncom/${lonCluster}_domain.tab for output\n");
            print(OUT $domaininsert);
          close(OUT);
         `ln -s new_${lonCluster}_domain.tab ../domain.tab`;
         # email appropriate message
         `echo "REPLACEdom:$lonCluster:$lonHostID:$date:$domaninsert" | mail -s "REPLACEdom:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
       }
       elsif ($domainexistflag and $lineexistflag) {
         print &lt;&lt;END;
   Entry exists in ${lonCluster}_domain.tab.
   END
         `ln -s ${lonCluster}_domain.tab ../domain.tab`;
         # email appropriate message
         `echo "STABLEUPDATEdom:$lonCluster:$lonHostID:$date:$domaininsert" | mail -s "STABLEUPDATEdom:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
       }
       elsif (!$domainexistflag and !$lineexistflag) {
         print &lt;&lt;END;
   New entry for $lonCluster.
   END
         `cat ../${lonCluster}_domain.tab &gt; ../new_${lonCluster}_domain.tab`;
          open(OUT,'&gt;&gt;../new_'.$lonCluster.'_domain.tab') or
            die("cannot open loncom/new_${lonCluster}_domain.tab for output\n");
            print(OUT $domaininsert);
          close(OUT);
         `ln -s new_${lonCluster}_domain.tab ../domain.tab`;
         # email appropriate message
         `echo "INSERTdom:$lonCluster:$lonHostID:$date:$domaininsert" | mail -s "INSERTdom:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
       }
     }
 }  }
 </perlscript>  </perlscript>
 </file>  </file>
Removed from v.1.19  
changed lines
  Added in v.1.41

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>