[BACK]Return to updatequery.piml CVS log [TXT] [DIR] Up to [LON-CAPA] / doc / loncapafiles

Diff for /doc/loncapafiles/updatequery.piml between versions 1.64 and 1.65

version 1.64, 2010/01/01 04:29:01 version 1.65, 2010/07/21 00:32:44
Line 125  my $domainDescription; Line 125  my $domainDescription;
 my $domainTabExtras;  my $domainTabExtras;
 my $primaryLibServer;  my $primaryLibServer;
 my $protocol;  my $protocol;
   my $intdom;
 my @libservers = ();  my @libservers = ();
 unless (-e "<TARGET />") {  unless (-e "<TARGET />") {
   print(&lt;&lt;END);    print(&lt;&lt;END);
Line 486  END Line 487  END
   
   my $choice=&lt;&gt;;    my $choice=&lt;&gt;;
   chomp($choice);    chomp($choice);
   if ($choice!~/^https?$/) {    if ($choice =~ /^https?$/) {
     open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');      open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
     print(OUT 'protocol'."\t".$choice."\n");      print(OUT 'protocol'."\t".$choice."\n");
     close(OUT);      close(OUT);
Line 498  END Line 499  END
   }    }
 }  }
   
   while (!$flag) {
     print(&lt;&lt;END);
   
   ****  Internet Domain Name of Your Institution ****
   
   The internet domain name used for servers at your institution 
   should be provided.  This will be similar to: ustate.edu or
   topcollege.ac.uk or my.hostingcompany.com, i.e., the part of
   a server hostname which indicates to which organization the 
   server belongs.
   
   ENTER INTERNET DOMAIN NAME:
   END
   
     my $choice=&lt;&gt;;
     chomp($choice);
     if ($choice =~/[^.]+\.[^.]+/) {
       open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
       print(OUT 'internet domain'."\t".$intdom."\n");
       close(OUT);
       $intdom=$choice;
       $flag=1;
     }
     else {
       print "Invalid input (must be at least two levels separated by .  - e.g., ustate.edu).\n";
     }
   }
   
   
 # update loncapa.conf  # update loncapa.conf
 my $confdir = '/etc/httpd/conf/';  my $confdir = '/etc/httpd/conf/';
 if ('<DIST />' eq 'sles10' || '<DIST />' eq 'sles11' || '<DIST />' eq 'suse10.1' || '<DIST />' eq 'suse10.2' || '<DIST />' eq 'suse10.3' || '<DIST />' eq 'suse11.1' || '<DIST />' eq 'suse11.2' || '<DIST />' eq 'debian5' || '<DIST />' eq 'ubuntu6' || '<DIST />' eq 'ubuntu8') {  if ('<DIST />' eq 'sles10' || '<DIST />' eq 'sles11' || '<DIST />' eq 'suse10.1' || '<DIST />' eq 'suse10.2' || '<DIST />' eq 'suse10.3' || '<DIST />' eq 'suse11.1' || '<DIST />' eq 'suse11.2' || '<DIST />' eq 'debian5' || '<DIST />' eq 'ubuntu6' || '<DIST />' eq 'ubuntu8') {
Line 676  my %perlvarstatic; Line 706  my %perlvarstatic;
         $protocol = 'http';          $protocol = 'http';
     }      }
   
       if (!$intdom) {
           foreach my $file (@hosts_files) {
               open(IN,'&lt;'.$file);
               while(my $line = &lt;IN&gt;) {
                   if ($line =~ /^\Q$perlvar{'lonHostID'}\E:\Q$perlvar{'lonDefDomain'}\E\:(?:access|library)\:https?:([^:]+)/) {
                       $intdom = $1;
                       last;
                   }
               }
           }
       }
   
     while(!$primaryLibServ && (@hosts_file || @domain_files)) {      while(!$primaryLibServ && (@hosts_file || @domain_files)) {
  my $file = shift(@domain_files);   my $file = shift(@domain_files);
         open(IN,'&lt;'.$file);          open(IN,'&lt;'.$file);
Line 703  my %perlvarstatic; Line 745  my %perlvarstatic;
     }      }
         
 # implement editing logic below, interactively  # implement editing logic below, interactively
 # update loncapa.conf until 13 is entered  # update loncapa.conf until 14 is entered
   
 $flag=0;  $flag=0;
   
Line 719  This is now the current configuration of Line 761  This is now the current configuration of
  5) Server Administrator's E-mail Address: $perlvar{'lonAdmEMail'}   5) Server Administrator's E-mail Address: $perlvar{'lonAdmEMail'}
  6) Support E-mail Address: $perlvar{'lonSupportEMail'}   6) Support E-mail Address: $perlvar{'lonSupportEMail'}
  7) Web Server Protocol (http or https): $protocol    7) Web Server Protocol (http or https): $protocol 
  8) Role: $perlvar{'lonRole'}   8) Internet Domain Name: $intdom 
  9) Cache Expiration Time: $perlvar{'lonExpire'}   9) Role: $perlvar{'lonRole'}
 10) Server Load: $perlvar{'lonLoadLim'}  10) Cache Expiration Time: $perlvar{'lonExpire'}
 11) User Load: $perlvar{'lonUserLoadLim'}  11) Server Load: $perlvar{'lonLoadLim'}
 12) Allow only secure connections: $securestatus   12) User Load: $perlvar{'lonUserLoadLim'}
 13) Everything is correct up above  13) Allow only secure connections: $securestatus 
   14) Everything is correct up above
 END  END
   
 my @error;  my @error;
Line 759  unless (($protocol eq 'http') || ($proto Line 802  unless (($protocol eq 'http') || ($proto
    push(@error,"Invalid Protocol (must be http or https");     push(@error,"Invalid Protocol (must be http or https");
 }  }
   
   if (!defined($intdom)) { 
      push(@error,"No internet domain name designated. Enter something like ustate.edu"); 
   } elsif ($intdom !~ /^[^.]+\.\w{2,6}$/) {
      push(@error,"Invalid Internet domain name (must be at least two levels separated by .  - e.g., ustate.edu");
   }
   
 if (!defined($primaryLibServer)) {  if (!defined($primaryLibServer)) {
    if (@libservers > 0) {     if (@libservers > 0) {
        push(@error,"No primary library server ID designated. Choose from: ".join(',',sort(@libservers)));         push(@error,"No primary library server ID designated. Choose from: ".join(',',sort(@libservers)));
Line 784  if (!defined($primaryLibServer)) { Line 833  if (!defined($primaryLibServer)) {
   
 if (@error) { print "\n*** ERRORS: \n\t".join("\n\t",@error)."\n"; }  if (@error) { print "\n*** ERRORS: \n\t".join("\n\t",@error)."\n"; }
   print(&lt;&lt;END);    print(&lt;&lt;END);
 ENTER A CHOICE OF 1-12 TO CHANGE, otherwise ENTER 13:  ENTER A CHOICE OF 1-13 TO CHANGE, otherwise ENTER 14:
 END  END
 my $choice=&lt;&gt;;  my $choice=&lt;&gt;;
 chomp($choice);  chomp($choice);
Line 866  END Line 915  END
   }    }
   elsif ($choice==8) {    elsif ($choice==8) {
   print(&lt;&lt;END);    print(&lt;&lt;END);
 8) Role: $perlvar{'lonRole'}  8) Internet Domain Name of Institution
   ENTER NEW VALUE: 
   
   END
       my $choice2=&lt;&gt;;
       chomp($choice2);
       $intdom=$choice2;
     }
     elsif ($choice==9) {
     print(&lt;&lt;END);
   9) Role: $perlvar{'lonRole'}
 ENTER NEW VALUE (this should be either 'access' or 'library'   ENTER NEW VALUE (this should be either 'access' or 'library' 
                  if in doubt select 'library'):                   if in doubt select 'library'):
 END  END
Line 874  END Line 933  END
     chomp($choice2);      chomp($choice2);
     $perlvar{'lonRole'}=$choice2;      $perlvar{'lonRole'}=$choice2;
   }    }
   elsif ($choice==9) {    elsif ($choice==10) {
   print(&lt;&lt;END);    print(&lt;&lt;END);
 9) Cache Expiration Time: $perlvar{'lonExpire'}  10) Cache Expiration Time: $perlvar{'lonExpire'}
 ENTER NEW VALUE (in seconds, 86400 is a reasonable value):  ENTER NEW VALUE (in seconds, 86400 is a reasonable value):
 END  END
     my $choice2=&lt;&gt;;      my $choice2=&lt;&gt;;
     chomp($choice2);      chomp($choice2);
     $perlvar{'lonExpire'}=$choice2;      $perlvar{'lonExpire'}=$choice2;
   }    }
   elsif ($choice==10) {    elsif ($choice==11) {
   print(&lt;&lt;END);    print(&lt;&lt;END);
 10) Server Load: $perlvar{'lonLoadLim'}  11) Server Load: $perlvar{'lonLoadLim'}
 ENTER NEW VALUE:  ENTER NEW VALUE:
 END  END
     my $choice2=&lt;&gt;;      my $choice2=&lt;&gt;;
     chomp($choice2);      chomp($choice2);
     $perlvar{'lonLoadLim'}=$choice2;      $perlvar{'lonLoadLim'}=$choice2;
   }    }
   elsif ($choice==11) {    elsif ($choice==12) {
   print(&lt;&lt;END);    print(&lt;&lt;END);
 11) User Load: $perlvar{'lonUserLoadLim'}  12) User Load: $perlvar{'lonUserLoadLim'}
 Numer of users that can login before machine is 'overloaded'  Numer of users that can login before machine is 'overloaded'
 ENTER NEW VALUE (integer value, 0 means there is no limit):  ENTER NEW VALUE (integer value, 0 means there is no limit):
 END  END
Line 902  END Line 961  END
     chomp($choice2);      chomp($choice2);
     $perlvar{'lonUserLoadLim'}=$choice2;      $perlvar{'lonUserLoadLim'}=$choice2;
   }    }
   elsif ($choice==12) {    elsif ($choice==13) {
   print(&lt;&lt;END);    print(&lt;&lt;END);
 12) Allow only secure connections: $securestatus   13) Allow only secure connections: $securestatus 
 The Lon-CAPA communication daemons lonc and lond can be configured to  The Lon-CAPA communication daemons lonc and lond can be configured to
 allow only secure connections by default.  allow only secure connections by default.
   
Line 931  END Line 990  END
     }      }
     ($securestatus,$securenum)=&securesetting(%perlvar);      ($securestatus,$securenum)=&securesetting(%perlvar);
   }    }
   elsif (($choice==13) && (!$error)) {    elsif (($choice==14) && (!$error)) {
     $flag=1;      $flag=1;
   }    }
   else {    else {
Line 964  unless (-l "<TARGET />") { Line 1023  unless (-l "<TARGET />") {
   $lineexistflag=0;    $lineexistflag=0;
   $hostidexistflag=0;    $hostidexistflag=0;
   $line2insert=&lt;&lt;END;    $line2insert=&lt;&lt;END;
 $perlvar{'lonHostID'}:$perlvar{'lonDefDomain'}:$perlvar{'lonRole'}:$hostname:$protocol  $perlvar{'lonHostID'}:$perlvar{'lonDefDomain'}:$perlvar{'lonRole'}:$hostname:$protocol:$intdom
 END  END
   if (!$domainTabExtras) {    if (!$domainTabExtras) {
  $domainTabExtras=':::::';   $domainTabExtras=':::::';
Line 1018  END Line 1077  END
        close(OUT);         close(OUT);
       `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;        `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
       # email appropriate message        # email appropriate message
       `echo "REPLACE:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "REPLACE:$lonCluster:$lonHostID:$protocol:$date" installrecord\@mail.lon-capa.org`;        `echo "REPLACE:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "REPLACE:$lonCluster:$lonHostID:$protocol:$intdom:$date" installrecord\@mail.lon-capa.org`;
     }      }
     elsif ($hostidexistflag and $lineexistflag) {      elsif ($hostidexistflag and $lineexistflag) {
       print &lt;&lt;END;        print &lt;&lt;END;
Line 1031  END Line 1090  END
        close(OUT);         close(OUT);
       `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;        `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
       # email appropriate message        # email appropriate message
       `echo "STABLEUPDATE:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "STABLEUPDATE:$lonCluster:$lonHostID:$protocol:$date" installrecord\@mail.lon-capa.org`;        `echo "STABLEUPDATE:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "STABLEUPDATE:$lonCluster:$lonHostID:$protocol:$intdom:$date" installrecord\@mail.lon-capa.org`;
     }      }
     elsif (!$hostidexistflag and !$lineexistflag) {      elsif (!$hostidexistflag and !$lineexistflag) {
       print &lt;&lt;END;        print &lt;&lt;END;
Line 1044  END Line 1103  END
        close(OUT);         close(OUT);
       `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;        `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
       # email appropriate message        # email appropriate message
       `echo "INSERT:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "INSERT:$lonCluster:$lonHostID:$protocol:$date" installrecord\@mail.lon-capa.org`;        `echo "INSERT:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "INSERT:$lonCluster:$lonHostID:$protocol:$intdom:$date" installrecord\@mail.lon-capa.org`;
     }      }
   }    }
   $lineexistflag=0;    $lineexistflag=0;
Removed from v.1.64  
changed lines
  Added in v.1.65

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>