Diff for /doc/loncapafiles/updatequery.piml between versions 1.13 and 1.91

version 1.13, 2002/06/06 15:36:41 version 1.91, 2018/10/28 03:07:37
Line 1 Line 1
 <!-- updatequery.piml -->  <!-- updatequery.piml -->
 <!-- Scott Harrison -->  
   
 <!-- $Id$ -->  <!-- $Id$ -->
   
Line 34  http://www.lon-capa.org/ Line 33  http://www.lon-capa.org/
 <target dist='default'>/</target>  <target dist='default'>/</target>
 <perlscript mode='fg'>  <perlscript mode='fg'>
 $|=1;  $|=1;
   use strict;
   use lib '/home/httpd/lib/perl/';
   use LONCAPA::Configuration;
   use LONCAPA::Lond;
   use LONCAPA::SSL;
   use LONCAPA;
   use GDBM_File;
   use Storable qw(thaw);
   use Term::ReadKey;
   use Locale::Country;
   
   sub get_new_sslkeypass {
       my $sslkeypass;
       my $flag=0;
   # get Password for SSL key
       while (!$flag) {
           $sslkeypass = &make_passphrase();
           if ($sslkeypass) {
               $flag = 1;
           } else {
               print "Invalid input (a password is required for the SSL key).\n";
           }
       }
       return $sslkeypass;
   }
   
   sub get_static_config {
   # get LCperlvars from loncapa_apache.conf
       my $confdir = '/etc/httpd/conf/';
       if ('<DIST />' eq 'sles10' || '<DIST />' eq 'sles11' || '<DIST />' eq 'sles12' || '<DIST />' eq 'sles15' || '<DIST />' eq 'suse10.1' || '<DIST />' eq 'suse10.2' || '<DIST />' eq 'suse10.3' || '<DIST />' eq 'suse11.1' || '<DIST />' eq 'suse11.2' || '<DIST />' eq 'suse11.3' || '<DIST />' eq 'suse11.4' || '<DIST />' eq 'suse12.1' || '<DIST />' eq 'suse12.2' || '<DIST />' eq 'suse12.3' || '<DIST />' eq 'suse13.1' || '<DIST />' eq 'suse13.2' || '<DIST />' eq 'debian5' || '<DIST />' eq 'debian6' || '<DIST />' eq 'ubuntu6' || '<DIST />' eq 'ubuntu8' || '<DIST />' eq 'ubuntu10' || '<DIST />' eq 'ubuntu12' || '<DIST />' eq 'ubuntu14' || '<DIST />' eq 'ubuntu16' || '<DIST />' eq 'ubuntu18') {
           $confdir = '/etc/apache2/';
       }
       my $filename='loncapa_apache.conf';
       my %LCperlvar;
       if (-e "$confdir$filename") {
           open(CONFIG,'&lt;'.$confdir.$filename) or die("Can't read $confdir$filename");
           while (my $configline=&lt;CONFIG&gt;) {
               if ($configline =~ /^[^\#]?PerlSetVar/) {
                   my ($unused,$varname,$varvalue)=split(/\s+/,$configline);
                   chomp($varvalue);
                   $LCperlvar{$varname}=$varvalue;
               }
           }
           close(CONFIG);
       }
       return \%LCperlvar;
   }
   
   sub get_domain_config {
       my ($dom,$primaryserver,$isprimary,$url,$perlvarref) = @_;
       my %confhash;
       if ($isprimary) {
           if (ref($perlvarref) eq 'HASH') {
               my $lonusersdir = $perlvarref-&gt;{'lonUsersDir'};
               my $fname = $lonusersdir.'/'.$dom.'/configuration.db';
               if (-e $fname) {
                   my $dbref=&LONCAPA::locking_hash_tie($fname,&GDBM_READER());
                   if (ref($dbref) eq 'HASH') {
                       foreach my $key (sort(keys(%{$dbref}))) {
                           my $value = $dbref->{$key};
                           if ($value =~ s/^__FROZEN__//) {
                               $value = thaw(&LONCAPA::unescape($value));
                           } else {
                               $value = &LONCAPA::unescape($value);
                           }
                           $confhash{$key} = $value;
                       }
                       &LONCAPA::locking_hash_untie($dbref);
                   }
               }
           }
       } else {
           if (open(PIPE,"wget --no-check-certificate '$url?primary=$primaryserver&format=raw' |")) {
               my $config = '';
               while (&lt;PIPE&gt;) {
                   $config .= $_;
               }
               close(PIPE);
               if ($config) {
                   my @pairs=split(/\&/,$config);
                   foreach my $item (@pairs) {
                       my ($key,$value)=split(/=/,$item,2);
                       my $what = &LONCAPA::unescape($key);
                       if ($value =~ s/^__FROZEN__//) {
                           $value = thaw(&LONCAPA::unescape($value));
                       } else {
                           $value = &LONCAPA::unescape($value); 
                       }
                       $confhash{$what}=$value;
                   }
               }
           }
       }
       return (\%confhash);
   }
   
   sub make_passphrase {
       my ($got_passwd,$firstpass,$secondpass,$passwd);
       my $maxtries = 10;
       my $trial = 0;
       while ((!$got_passwd) && ($trial &lt; $maxtries)) {
           $firstpass = &get_password('Enter a password for the SSL key (at least 6 characters long)');
           if (length($firstpass) &lt; 6) {
               print('Password too short.'."\n".
                 'Please choose a password with at least six characters.'."\n".
                 'Please try again.'."\n");
           } elsif (length($firstpass) &gt; 30) {
               print('Password too long.'."\n".
                     'Please choose a password with no more than thirty characters.'."\n".
                     'Please try again.'."\n");
           } else {
               my $pbad=0;
               foreach (split(//,$firstpass)) {if ((ord($_)&lt;32)||(ord($_)&gt;126)){$pbad=1;}}
               if ($pbad) {
                   print('Password contains invalid characters.'."\n".
                         'Password must consist of standard ASCII characters.'."\n".
                         'Please try again.'."\n");
               } else {
                   $secondpass = &get_password('Enter password a second time');
                   if ($firstpass eq $secondpass) {
                       $got_passwd = 1;
                       $passwd = $firstpass;
                   } else {
                       print('Passwords did not match.'."\n".
                             'Please try again.'."\n");
                   }
               }
           }
           $trial ++;
       }
       return $passwd;
   }
   
   sub get_password {
       my ($prompt) = @_;
       local $| = 1;
       print $prompt.': ';
       my $newpasswd = '';
       ReadMode 'raw';
       my $key;
       while(ord($key = ReadKey(0)) != 10) {
           if(ord($key) == 127 || ord($key) == 8) {
               chop($newpasswd);
               print "\b \b";
           } elsif(!ord($key) &lt; 32) {
               $newpasswd .= $key;
               print '*';
           }
       }
       ReadMode 'normal';
       print "\n";
       return $newpasswd;
   }
   
   sub send_mail {
       my ($hostname,$recipient,$subj,$file) = @_;
       my $from = 'www@'.$hostname;
       my $certmail = "To: $recipient\n".
                      "From: $from\n".
                      "Subject: ".$subj."\n".
                      "Content-type: text/plain\; charset=UTF-8\n".
                      "MIME-Version: 1.0\n\n";
       if (open(my $fh,"&lt;$file")) {
           while (&lt;$fh&gt;) {
               $certmail .= $_;
           }
           close($fh);
           $certmail .= "\n\n";
           if (open(my $mailh, "|/usr/lib/sendmail -oi -t -odb")) {
               print $mailh $certmail;
               close($mailh);
               print "Mail sent ($subj) to $recipient\n";
           } else {
               print "Sending mail ($subj) to $recipient failed.\n";
           }
       }
       return;
   }
   
   sub mail_csr {
       my ($types,$lonCluster,$lonHostID,$desiredhostname,$certsdir,$connectcsr,$replicatecsr,$perlvarref) = @_;
       my ($camail,$flag);
       if ($lonCluster eq 'production' || $lonCluster eq 'development') {
           $camail = $perlvarref-&gt;{'SSLEmail'};
       } else {
           $flag=0;
   # get Certificate Authority E-mail
           while (!$flag) {
               print(&lt;&lt;END);
   
   ENTER EMAIL ADDRESS TO SEND CERTIFICATE SIGNING REQUESTS
   END
   
               my $choice=&lt;&gt;;
               chomp($choice);
               if ($choice ne '') {
                   open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
                   print(OUT 'Certificate Authority Email Address'."\t".$choice."\n");
                   close(OUT);
                   $camail=$choice;
                   $flag=1;
               } else {
                   print "Invalid input (an email address is required).\n";
               }
           }
       }
       if ($camail) {
           my $subj;
           if (($types eq 'both') || ($types = 'host')) {
               if (-e "$certsdir/$connectcsr") {
                   $subj = "Certificate Request ($lonHostID)";
                   print(&send_mail($desiredhostname,$camail,$subj,"$certsdir/$connectcsr"));
               }
           }
           if (($types eq 'both') || ($types = 'hostname')) {
               if (-e "$certsdir/$replicatecsr") {
                   $subj = "Certificate Request (internal-$desiredhostname)";
                   print(&send_mail($desiredhostname,$camail,$subj,"$certsdir/$replicatecsr"));
               }
           }
       }
   }
   
   sub ssl_info {
       print(&lt;&lt;END);
   
   ****** Information about Country, State or Province and City *****
   
   A two-letter country code, e.g., US, CA, DE etc. as defined by ISO 3166,
   is required. A state or province, and a city are also required.
   This locality information is included in two SSL certificates used internally
   by LON-CAPA, unless you are running standalone.
   
   If your server will be part of either the production or development
   clusters, then the certificate will need to be signed by the official
   LON-CAPA Certificate Authority (CA).  If you will be running your own
   cluster then the cluster will need to create its own CA.
   
   END
   }
   
   sub get_country {
       my ($desiredhostname) = @_;
   # get Country
       my ($posscountry,$country);
       if ($desiredhostname =~ /\.(edu|com|org)$/) {
           $posscountry = 'us';
       } else {
           ($posscountry) = ($desiredhostname =~ /\.(a-z){2}$/);
       }
       if ($posscountry) {
           my $countrydesc = &Locale::Country::code2country($posscountry);
           if ($countrydesc eq '') {
               undef($posscountry);
           }
       }
   
       my $flag=0;
       while (!$flag) {
           if ($posscountry) {
               $posscountry = uc($posscountry);
               print "ENTER TWO-LETTER COUNTRY CODE [$posscountry]:\n";
           } else {
               print "ENTER TWO-LETTER COUNTRY CODE:\n";
           }
           my $choice=&lt;&gt;;
           chomp($choice);
           if ($choice ne '') {
               if (&Locale::Country::code2country(lc($choice))) {
                   open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
                   print(OUT 'country'."\t".uc($choice)."\n");
                   close(OUT);
                   $country=uc($choice);
                   $flag=1;
               } else {
                   print "Invalid input -- a valid two letter country code is required\n";
               }
           } elsif (($choice eq '') && ($posscountry ne '')) {
               open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
               print(OUT 'country'."\t".$posscountry."\n");
               close(OUT);
               $country = $posscountry;
               $flag = 1;
           } else {
               print "Invalid input -- a country code is required\n";
           }
       }
       return $country;
   }
   
   sub get_state {
   # get State or Province
       my $flag=0;
       my $state = '';
       while (!$flag) {
           print(&lt;&lt;END);
   
   ENTER STATE OR PROVINCE NAME:
   END
   
           my $choice=&lt;&gt;;
           chomp($choice);
           if ($choice ne '') {
               open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
               print(OUT 'state'."\t".$choice."\n");
               close(OUT);
               $state=$choice;
               $flag=1;
           } else {
               print "Invalid input (a state or province name is required).\n";
           }
       }
       return $state;
   }
   
   sub get_city {
   # get City
       my $flag=0;
       my $city = '';
       while (!$flag) {
           print(&lt;&lt;END);
   
   ENTER CITY NAME:
   END
   
           my $choice=&lt;&gt;;
           chomp($choice);
           if ($choice ne '') {
               open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
               print(OUT 'city'."\t".$choice."\n");
               close(OUT);
               $city=$choice;
               $flag=1;
           } else {
               print "Invalid input (a city is required).\n";
           }
       }
       return $city;
   }
   
   sub confirm_locality {
       my ($domainDescription,$country,$state,$city) = @_;
       my $flag = 0;
       while (!$flag) {
           print(&lt;&lt;END);
   
   The domain description, country, state and city will be
   used in the SSL certificates
   
   1) Domain Description: $domainDescription
   2) Country: $country
   3) State or Province: $state
   4) City: $city
   5) Everything is correct up above
   
   ENTER A CHOICE OF 1-4 TO CHANGE, otherwise ENTER 5:
   END
           my $choice=&lt;&gt;;
           chomp($choice);
           if ($choice == 1) {
               print(&lt;&lt;END);
   1) Domain Description: $domainDescription
   ENTER NEW VALUE
   END
               my $choice2=&lt;&gt;;
               chomp($choice2);
               $domainDescription=$choice2;
           } elsif ($choice == 2) {
               print(&lt;&lt;END);
   2) Country: $country
   ENTER NEW VALUE (this should be a two-character code, e,g, US, CA, DE)
   END
               my $choice2=&lt;&gt;;
               chomp($choice2);
               $country = uc($choice2);
           } elsif ($choice == 3) {
               print(&lt;&lt;END);
   3) State or Province: $state
   ENTER NEW VALUE:
   END
               my $choice2=&lt;&gt;;
               chomp($choice2);
               $state=$choice2;
           } elsif ($choice == 4) {
               print(&lt;&lt;END);
   4) City: $city
   ENTER NEW VALUE:
   END
               my $choice2=&lt;&gt;;
               chomp($choice2);
               $city=$choice2;
           } elsif ($choice == 5) {
               $flag=1;
               $state =~ s{/}{ }g;
               $city =~ s{/}{ }g;
               $domainDescription =~ s{/}{ }g;
           } else {
               print "Invalid input.\n";
           }
       }
       return ($domainDescription,$country,$state,$city);
   }
   
   sub make_key {
       my ($certsdir,$privkey,$sslkeypass) = @_;
   # generate SSL key
       if ($certsdir && $privkey) {
           if (-f "$certsdir/lonKey.enc") {
               my $mode = 0600;
               chmod $mode, "$certsdir/lonKey.enc";
           }
           open(PIPE,"openssl genrsa -des3 -passout pass:$sslkeypass -out $certsdir/lonKey.enc 2048 2&gt;&1 |");
           close(PIPE);
           if (-f "$certsdir/$privkey") {
               my $mode = 0600;
               chmod $mode, "$certsdir/$privkey";
           }
           open(PIPE,"openssl rsa -in $certsdir/lonKey.enc -passin pass:$sslkeypass -out $certsdir/$privkey -outform PEM |");
           close(PIPE);
           if (-f "$certsdir/lonKey.enc") {
               my $mode = 0400;
               chmod $mode, "$certsdir/lonKey.enc";
           }
           if (-f "$certsdir/$privkey") {
               my $mode = 0400;
               chmod $mode, "$certsdir/$privkey";
           }
       } else {
           print "Key creation failed.  Missing one or more of: certificates directory, key name\n";
       }
   }
   
   sub encrypt_key {
       my ($certsdir,$privkey,$sslkeypass) = @_;
       if ($certsdir && $privkey) { 
           if ((-f "$certsdir/$privkey") && (!-f "$certsdir/lonKey.enc")) {
               open(PIPE,"openssl rsa -des3 -in $certsdir/$privkey -out $certsdir/lonKey.enc |");
           }
       }
       return; 
   }
   
   sub make_host_csr {
       my ($certsdir,$sslkeypass,$connectcsr,$connectsubj) = @_;
   # generate SSL csr for hostID
       if ($certsdir && $connectcsr && $connectsubj) {
           open(PIPE,"openssl req -key $certsdir/lonKey.enc -passin pass:$sslkeypass -new -batch -subj \"$connectsubj\" -out $certsdir/$connectcsr |");
           close(PIPE);
       } else {
           print "Creation of certificate signing request failed.  Missing one or more of: certificates directory, CSR name, or locality information.\n";
       }
   }
   
   sub make_hostname_csr {
       my ($certsdir,$sslkeypass,$replicatecsr,$replicatesubj) = @_;
   # generate SSL csr for internal hostname
       if ($certsdir && $replicatecsr && $replicatesubj) {
           open(PIPE,"openssl req -key $certsdir/lonKey.enc -passin pass:$sslkeypass -new -batch -subj \"$replicatesubj\" -out $certsdir/$replicatecsr |");
           close(PIPE);
       } else {
           print "Creation of certificate signing request failed.  Missing one or more of: certificates directory, CSR name, or locality information.\n";
       }
   }
   
   sub securesetting {
       my (%perlvar) = @_;
       my ($securestatus,$securenum);
       if (($perlvar{'loncAllowInsecure'}) && ($perlvar{'londAllowInsecure'})) {
           $securenum = 4;
           $securestatus = 'Allow insecure connections - inbound and outbound';
       } elsif (($perlvar{'loncAllowInsecure'}) && (!$perlvar{'londAllowInsecure'})) {
           $securenum = 3;
           $securestatus = 'Outbound: allow insecure connections; Inbound: secure only';
       } elsif ((!$perlvar{'loncAllowInsecure'}) && ($perlvar{'londAllowInsecure'})) {
           $securenum = 2;
           $securestatus = 'Outbound: secure connections only; Inbound: allow insecure';
       } elsif ((!$perlvar{'loncAllowInsecure'}) && (!$perlvar{'londAllowInsecure'})) {
           $securenum = 1;
           $securestatus = 'Secure connections only - inbound and outbound ';
       }
       return ($securestatus,$securenum);
   }
   
   sub get_sslnames {
       my %sslnames = (
                         key      =&gt; 'lonnetPrivateKey',
                         host     =&gt; 'lonnetCertificate',
                         hostname =&gt; 'lonnetHostnameCertificate',
                         ca       =&gt; 'lonnetCertificateAuthority',
                      );
       return %sslnames;
   }
   
   sub get_ssldesc {
       my %ssldesc = (
                       key      =&gt; 'Private Key',
                       host     =&gt; 'Connections Certificate',
                       hostname =&gt; 'Replication Certificate',
                       ca       =&gt; 'LON-CAPA CA Certificate',
                     );
       return %ssldesc;
   }
   
   sub get_cert_status {
       my ($lonHostID,$hostname,$perlvarstatic) = @_;
       my $currcerts = &LONCAPA::SSL::print_certstatus({$lonHostID =&gt; $hostname,},'text','cgi');
       my ($lonkeystatus,$lonhostcertstatus,$lonhostnamecertstatus,%sslstatus);
       my $output = '';
       if ($currcerts eq "$lonHostID:error") {
           $output .= "No information available for SSL certificates\n";
           $sslstatus{'key'} = -1;
           $sslstatus{'host'} = -1;
           $sslstatus{'hostname'} = -1;
           $sslstatus{'ca'} = -1;
           $lonkeystatus = 'unknown status';
           $lonhostcertstatus = 'unknown status';
           $lonhostnamecertstatus = 'unknown status';
       } else {
           my %sslnames = &get_sslnames();
           my %ssldesc = &get_ssldesc();
           my %csr;
           my ($lonhost,$info) = split(/\:/,$currcerts,2);
           if ($lonhost eq $lonHostID) {
               my @items = split(/\&/,$info);
               foreach my $item (@items) {
                   my ($key,$value) = split(/=/,$item,2);
                   if ($key =~ /^(host(?:|name))\-csr$/) {
                       $csr{$1} = $value;
                   }
                   my @data = split(/,/,$value);
                   if (grep(/^\Q$key\E$/,keys(%sslnames))) {
                       my ($checkcsr,$comparecsr);
                       if (lc($data[0]) eq 'yes') {
                           $output .= "$ssldesc{$key} ".$perlvarstatic-&gt;{$sslnames{$key}}." available with status = $data[1]\n";
                           if ($key eq 'key') {
                               $lonkeystatus = "status: $data[1]";
                               if ($data[1] =~ /ok$/) {
                                   $sslstatus{$key} = 1;
                               }
                           } else {
                               my $setstatus;
                               if (($key eq 'host') || ($key eq 'hostname')) { 
                                   if ($data[1] eq 'otherkey') {
                                       $sslstatus{$key} = 4;
                                       $setstatus = 1;
                                       if ($key eq 'host') {
                                           $lonhostcertstatus = "status: created with different key";
                                       } elsif ($key eq 'hostname') {
                                           $lonhostnamecertstatus = "status: created with different key"; 
                                       }
                                   } elsif ($data[1] eq 'nokey') {
                                       $sslstatus{$key} = 5;
                                       $setstatus = 1;
                                       if ($key eq 'host') {
                                           $lonhostcertstatus = "status: created with missing key";
                                       } elsif ($key eq 'hostname') {
                                           $lonhostnamecertstatus = "status: created with missing key";
                                       }
                                   }
                                   if ($setstatus) {
                                       $comparecsr = 1;
                                   }
                               }
                               unless ($setstatus) {
                                   if ($data[1] eq 'expired') {
                                       $sslstatus{$key} = 2;
                                   } elsif ($data[1] eq 'future') {
                                       $sslstatus{$key} = 3;
                                   } else {
                                       $sslstatus{$key} = 1;
                                   }
                                   if ($key eq 'host') {
                                       $lonhostcertstatus = "status: $data[1]";
                                   } elsif ($key eq 'hostname') {
                                       $lonhostnamecertstatus = "status: $data[1]";
                                   }
                               }
                           }
                       } else {
                           $sslstatus{$key} = 0;
                           $output .= "$ssldesc{$key} ".$perlvarstatic-&gt;{$sslnames{$key}}." not available\n";
                           if ($key eq 'key') {
                               $lonkeystatus = 'still needed';
                           } elsif (($key eq 'host') || ($key eq 'hostname')) {
                               $checkcsr = 1;
                           }
                       }
                       if (($checkcsr) || ($comparecsr)) {
                           my $csrfile = $perlvarstatic-&gt;{$sslnames{$key}};
                           $csrfile =~s /\.pem$/.csr/;
                           my $csrstatus;
                           if (-e $perlvarstatic-&gt;{'lonCertificateDirectory'}."/$csrfile") {
                               open(PIPE,"openssl req -text -noout -verify -in ".$perlvarstatic-&gt;{'lonCertificateDirectory'}."/$csrfile 2&gt;&1 |");
                               while(&lt;PIPE&gt;) {
                                   chomp();
                                   $csrstatus = $_;
                                   last;
                               }
                               close(PIPE);
                               if ((($comparecsr) && ($csr{$key})) || ($checkcsr)) {
                                   $output .= "Certificate signing request for $ssldesc{$key} available with status = $csrstatus\n\n";
                                   if ($key eq 'host') {
                                       $lonhostcertstatus = 'awaiting signature';
                                   } else {
                                       $lonhostnamecertstatus = 'awaiting signature';
                                   }
                                   $sslstatus{$key} = 3;
                               }
                           } elsif ($checkcsr) {
                               $output .= "No certificate signing request available for $ssldesc{$key}\n\n";
                               if ($key eq 'host') {
                                   $lonhostcertstatus = 'still needed';
                               } else {
                                   $lonhostnamecertstatus = 'still needed';
                               }
                           }
                       }
                   }
               }
           }
       }
       return ($output,$lonkeystatus,$lonhostcertstatus,$lonhostnamecertstatus,\%sslstatus);
   }
   
   print(&lt;&lt;END);    print(&lt;&lt;END);
   
   
Line 48  $|=1; Line 671  $|=1;
 *********************************************  *********************************************
   
 END  END
 sleep(3);  #sleep(3);
   
   </perlscript>
   </file>
   <file>
   <target dist='default'>../../loncom/hosts.tab</target>
   <perlscript mode='fg'>
   my $lonCluster;
   my $currCluster;
   
   if (-l "<TARGET />") {
     my $currlink = readlink("<TARGET />");
     if ($currlink =~ /^new_(existing|standalone|development|production)_hosts\.tab$/) {
         $currCluster = $1;
     }
     my %clustertypes = (
                          production  =&gt; 'PRODUCTION',
                          standalone  =&gt; 'STAND-ALONE',
                          development =&gt; 'DEVELOPMENT',
                          existing    =&gt; 'RUNNING YOUR OWN CLUSTER',
                        );
     if (($currCluster) && (exists($clustertypes{$currCluster}))) {
         print(&lt;&lt;END);
   
   The cluster type for this server is currently: $clustertypes{$currCluster}
   END
   
     }
   }
   
   print(&lt;&lt;END);
   
   ===============================================================================
   
   Which cluster option would you like to have installed?
   IMPORTANT: to take advantage of the cluster options 1) and 3),
   you must contact loncapa\@loncapa.org.
   
   1) PRODUCTION - you want to eventually connect this machine to the
                   LON-CAPA content sharing network. This setting is for
                   schools, colleges, and universities, that currently
                   are running - or in the future will run - courses.
   2) STAND-ALONE - you want this machine to run in 'stand-alone' mode and
                    not be connected to other LON-CAPA machines for now.
   3) DEVELOPMENT - you want to do software (not content!) development with
                    this workstation and eventually link it with the
                    workstations of other LON-CAPA software developers.
   4) RUNNING YOUR OWN CLUSTER - this machine is not in the standard LON-CAPA
                    clusters and won't be in the future and you want the existing
                    hosts.tab and domain.tab files to be left alone.
                    (This choice is unlikely what you want to select.)
   END
   # Option number 26 will install rawhide_hosts.tab, but
   # the typical user does not want to be part of an intensive
   # machine test cluster.
   
   # get input
   # if valid then process, otherwise loop
   my $flag=0;
   while (!$flag) {
     print "ENTER 1, 2, 3, or 4:\n";
     my $choice=&lt;&gt;;
     chomp($choice);
     if ($choice==1) {
       $lonCluster='production'; $flag=1;
     }
     elsif ($choice==2) {
       $lonCluster='standalone'; $flag=1;
     }
     elsif ($choice==3) {
       $lonCluster='development'; $flag=1;
     }
     elsif ($choice==4) {
       $lonCluster='existing'; $flag=1;
       foreach my $file ('hosts.tab','dns_hosts.tab',
                         'domain.tab','dns_domain.tab') {
           if (-e '/home/httpd/lonTabs/'.$file) {
       `cp /home/httpd/lonTabs/$file ../existing_$file`;
           }
           else {
       print &lt;&lt;END;
   There is no existing /home/httpd/lonTabs/$file
   END
               die('');
           }
       }
     }
     elsif ($choice==26) {
       $lonCluster='rawhide'; $flag=1;
     }
   }
 </perlscript>  </perlscript>
 </file>  </file>
 <file>  <file>
 <target dist='default'>/home/httpd/lonTabs/hosts.tab</target>  <target dist='default'>/home/httpd/lonTabs/hosts.tab</target>
 <perlscript mode='fg'>  <perlscript mode='fg'>
 $|=1;  $|=1;
   my $domainDescription;
   my $domainTabExtras;
   my $primaryLibServer;
   my $protocol;
   my $intdom;
   my $desiredhostname;
   my $city;
   my $state;
   my $country;
   my @libservers = ();
 unless (-e "<TARGET />") {  unless (-e "<TARGET />") {
   print(&lt;&lt;END);    print(&lt;&lt;END);
            WELCOME TO LON-CAPA!             WELCOME TO LON-CAPA!
   
 If you have questions, please visit http://install.lon-capa.org  If you have questions, please visit http://install.loncapa.org
 or contact sharrison\@mail.lon-capa.org.  or contact helpdesk\@loncapa.org.
   
 ===============================================================================  ===============================================================================
 The following 4 values are needed to configure LON-CAPA:  The following 10 values are needed to configure LON-CAPA:
 * Machine Role  * Machine Role
 * LON-CAPA Domain Name  * LON-CAPA Domain Name
 * LON-CAPA Machine ID Name, and  * LON-CAPA Machine ID Name
 * System Administration E-mail Address.  * Server Administration E-mail Address
   * LON-CAPA Domain's Primary Library Server Machine ID
   * Web Server Protocol
   * Internet Domain Name of Your Institution
   * Hostname
   * City, State, Country for LON-CAPA SSL certificate 
   * Password for key for creating SSL certificates
   ===============================================================================
   
   In addition, a Support E-mail Address can also be included. If
   an address is included then one of the options in the LON-CAPA 
   help menu will be a link to a form that a user will complete to
   request LON-CAPA help.  
   
 END  END
   
 open(OUT,'&gt;/tmp/loncapa_updatequery.out');  open(OUT,'&gt;/tmp/loncapa_updatequery.out');
Line 78  close(OUT); Line 814  close(OUT);
 **** Machine Role ****  **** Machine Role ****
 Library server (recommended if first-time installation of LON-CAPA):  Library server (recommended if first-time installation of LON-CAPA):
    Servers that are repositories of authoritative educational resources.     Servers that are repositories of authoritative educational resources.
    These servers also provide the construction space by which instructors     These servers also provide the authoring spaces in which content
    assemble their classroom online material.     creators (e.g., faculty instructors) create their learning content.
 Access server:  Access server:
    Servers that load-balance high-traffic delivery of educational resources     Servers that load-balance high-traffic delivery of educational resources
    over the world-wide web.     over the world-wide web.
Line 115  while (!$flag) { Line 851  while (!$flag) {
 }  }
   
 # need to recommend a machine ID name (ipdomain.l.somenumber)  # need to recommend a machine ID name (ipdomain.l.somenumber)
 my $hostname=`hostname`; chomp($hostname);  my $hostname=`hostname -f`; chomp($hostname);
 my $ipdomain='';  my $ipdomain='';
 if ($hostname=~/([^\.]*)\.([^\.]*)$/) {  if ($hostname=~/([^\.]*)\.([^\.]*)$/) {
   $ipdomain=$1;    $ipdomain=$1;
Line 124  if ($hostname=~/([^\.]*)\.([^\.]*)$/) { Line 860  if ($hostname=~/([^\.]*)\.([^\.]*)$/) {
   print(&lt;&lt;END);    print(&lt;&lt;END);
   
 **** Domain ****  **** Domain ****
 [this does NOT need to correspond to internet address domains,  [This does NOT need to correspond to an internet address domain.
  examples might be "msu" or "bionet" or "vermontcc"]   Please make this name short AND descriptive of your organization.
    Domain names are close to impossible to change later!!!
    Good examples might be "msu" or "bionet" or "vermontcc".
    Bad examples are "physics" (too general)
      or "michiganstateuniversity" (too long)
      or "msuedu" (just make it "msu", or else make it msu.edu)
      or "msuphysics" (only if there is a good reason to limit to department
                       - we don't know of one)
      or "mydomain" (what is that?)
    Avoid multiple domains at the same institution, even if it means that you 
    have to actually work together with your colleagues. You can still run
    multiple library servers within the same domain.
    If this domain is eventually going to be part of the main production
    cluster, you MUST contact the LON-CAPA group at MSU (loncapa\@loncapa.org)
    to have a domain name assigned, and then use it exactly as given. This is
    also true for test installs that might eventually turn into production setups.
    The short domain name needs to be unique, if your aim is to join a cluster 
    containing existing domains. Stop now if you have not yet contacted the 
    MSU LON-CAPA group.] 
 END  END
   
 # get domain name  # get domain name
Line 145  END Line 899  END
 }  }
   my $choice=&lt;&gt;;    my $choice=&lt;&gt;;
   chomp($choice);    chomp($choice);
     my $bad_domain_flag=0;
     my @bad_domain_names=('res','raw','userfiles','priv','adm','uploaded',
    'editupload');
     foreach my $bad (@bad_domain_names) {
       $bad_domain_flag=1 if $choice eq $bad;
     }
     if ($choice=~/capa/i) {
        $bad_domain_flag=1;
     }
   if ($ipdomain and $choice=~/^\s*$/) {    if ($ipdomain and $choice=~/^\s*$/) {
     $choice=$ipdomain;      $choice=$ipdomain;
     open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');      open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
Line 152  END Line 915  END
     close(OUT);      close(OUT);
     $lonDefDomain=$choice;      $lonDefDomain=$choice;
     $flag=1;      $flag=1;
   }    } elsif (length($choice)&gt;35) {
   elsif ($choice!~/\_/ and $choice=~/^\w+$/) {      print "Name too long\n";
     } elsif (length($choice)&lt;2) {
       print "Name too short\n";
     } elsif ($bad_domain_flag) {
       print "Invalid input ('$choice' conflicts with LON-CAPA namespace).\n";
       print "Please try something different than '$choice'\n";
     } elsif ($choice!~/\_/ and $choice=~/^[\w\-.]+$/) {
     open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');      open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
     print(OUT 'lonDefDomain'."\t".$choice."\n");      print(OUT 'lonDefDomain'."\t".$choice."\n");
     close(OUT);      close(OUT);
     $lonDefDomain=$choice;      $lonDefDomain=$choice;
     $r='l';      $r='l';
     $flag=1;      $flag=1;
     } else {
       print "Invalid input (only alphanumeric characters, '-', and '.' supported).\n";
     }
   }
   
   # get domain description
   # accept if valid, if not valid, tell user and repeat
   $flag=0;
   
   while (!$flag) {
     print(&lt;&lt;END);
   
   **** Domain Description ****
   String describing the domain, to be shown to users.
   [Example, msu is Michigan State University]
   ENTER DOMAIN DESCRIPTION:
   END
   
     my $choice=&lt;&gt;;
     chomp($choice);
     if ($choice!~/:/) {
       open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
       print(OUT 'domainDescription'."\t".$choice."\n");
       close(OUT);
       $domainDescription=$choice;
       $flag=1;
   }    }
   else {    else {
     print "Invalid input (only alphanumeric characters supported).\n";      print "Invalid input (no ':' allowed).\n";
   }    }
 }  }
   
Line 175  if ($lonDefDomain) { Line 970  if ($lonDefDomain) {
   print(&lt;&lt;END);    print(&lt;&lt;END);
   
 **** Machine ID Name ****  **** Machine ID Name ****
 [this does NOT need to correspond to internet address names;  [This does NOT need to correspond to internet address names;
  this name MUST be unique to the whole LON-CAPA network;   this name MUST be unique to the whole LON-CAPA network;
  we recommend that you use a name based off of your institution;   we recommend that you use a name based off of your institution.
  good examples: "msul1" or "bionetl1";   Good examples: "msul1" or "bioneta2".
  bad examples: "loncapabox" or "studentsinside"]   Bad examples: "loncapabox" or "studentsinside".
    Note that machine names are very hard to change later.]
 END  END
 # get machine name  # get machine name
 # accept if valid, if not valid, tell user and repeat  # accept if valid, if not valid, tell user and repeat
Line 197  END Line 993  END
 }  }
   my $choice=&lt;&gt;;    my $choice=&lt;&gt;;
   chomp($choice);    chomp($choice);
   if ($lonHostID and $choice=~/^\s*$/) {    if ($choice=~/capa/i) {
       print "Invalid input (names containing 'capa' are reserved).\n";
     } elsif ($lonHostID and $choice=~/^\s*$/) {
     $choice=$lonHostID;      $choice=$lonHostID;
     open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');      open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
     print(OUT 'lonHostID'."\t".$choice."\n");      print(OUT 'lonHostID'."\t".$choice."\n");
     close(OUT);      close(OUT);
     $lonHostID=$choice;      $lonHostID=$choice;
     $flag=1;      $flag=1;
   }    } elsif (length($choice)&gt;45) {
   elsif ($choice!~/\_/ and $choice=~/^\w+$/) {      print "Name too long\n";
     } elsif (length($choice)&lt;4) {
       print "Name too short\n";
     } elsif ($choice!~/\_/ and $choice=~/^[\w\-.]+$/) {
     open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');      open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
     print(OUT 'lonHostID'."\t".$choice."\n");      print(OUT 'lonHostID'."\t".$choice."\n");
     close(OUT);      close(OUT);
     $lonHostID=$choice;      $lonHostID=$choice;
     $flag=1;      $flag=1;
     } else {
       print "Invalid input (only alphanumeric characters, '-', and '.' supported).\n";
   }    }
   else {  
     print "Invalid input (only alphanumeric characters supported).\n";  
   }  
 }  }
   
 # get e-mail address  # get primary library server in domain
   if ($lonRole eq 'library') {
       if (!grep/^\Q$lonHostID\E$/,@libservers) {
           push(@libservers,$lonHostID);
       } 
       if (@libservers == 1) {
           $primaryLibServer = $libservers[0];
       }
   }
   
   $flag=0;
   while (!$flag) {
     print(&lt;&lt;END);
   **** Domain's Primary Library Server ID ****
   This should be the LON-CAPA machine ID of a library server in your 
   domain.  If you only have a single library server in your domain, then
   the Primary Library server ID will be the machine ID of that server. 
   This server will be where domain data which are not associated with any
   specific home library server will be stored (e.g., configurations that
   apply to all nodes in the domain).
   END
       if (defined($primaryLibServer)) {
           print(&lt;&lt;END);
   ENTER DOMAIN'S PRIMARY LIBRARY SERVER ID [$primaryLibServer]:
   END
       } elsif (@libservers &gt; 0) {
           print(&lt;&lt;END);
   ENTER DOMAIN'S PRIMARY LIBRARY SERVER ID [$libservers[0]]
   END
       } else {
           print (&lt;&lt;END);
   No library servers could be identified for this domain.  If you have already installed LON-CAPA on a different server (designated as a library server) in this domain, please enter the LONCAPA MACHINE ID of that server.  If not, you will need to install a LON-CAPA library server.  Enter the MACHINE ID of the server you plan to designate as a library server.
   END
       }
   
       my $choice=&lt;&gt;;
       chomp($choice);
       if ($primaryLibServer and $choice=~/^\s*$/) {
           $choice=$primaryLibServer;
           open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
           print(OUT 'primaryLibServer'."\t".$choice."\n");
           close(OUT);
           $flag=1;
       } elsif (length($choice)&gt;35) {
           print "Name too long\n";
       } elsif (length($choice)&lt;4) {
           print "Name too short\n";
       } elsif ($choice!~/\_/ and $choice=~/^[\w\-.]+$/) {
           open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
           print(OUT 'primaryLibServer'."\t".$choice."\n");
           close(OUT);
           $primaryLibServer=$choice;
           $flag=1;
       } else {
           print "Invalid input (only alphanumeric characters, '-', and '.' supported).\n";
       }
   }
   
   
   # get admin e-mail address
 # accept if valid, if not valid, tell user and repeat  # accept if valid, if not valid, tell user and repeat
 $flag=0;  $flag=0;
 my $lonAdmEMail;  my $lonAdmEMail;
 while (!$flag) {  while (!$flag) {
   print(&lt;&lt;END);    print(&lt;&lt;END);
   
 **** System Administrator's E-mail ****  **** Server Administrator's E-mail ****
 E-mail address of the person who will manage this machine  E-mail address of the person who will manage this machine
 [should be in the form somebody\@somewhere]  [should be in the form somebody\@somewhere]
 ENTER E-MAIL ADDRESS:  ENTER ADMIN E-MAIL ADDRESS:
 END  END
   
   my $choice=&lt;&gt;;    my $choice=&lt;&gt;;
Line 244  END Line 1103  END
   }    }
 }  }
   
   
   # get support e-mail address
   # accept if valid, if not valid, tell user and repeat
   $flag=0;
   my $lonSupportEMail;
   while (!$flag) {
     print(&lt;&lt;END);
   
   **** Support E-mail ****
   E-mail address of the person who will receive 
   help requests from LON-CAPA users who access 
   the system via this server. If the address is left blank,
   then a help support form will not be displayed 
   as part of the help menu.
   [should be in the form somebody\@somewhere]
   ENTER SUPPORT E-MAIL ADDRESS:
   END
   
     my $choice=&lt;&gt;;
     chomp($choice);
     $choice =~ s/\s//g;
     if ( ($choice=~/\@/) || $choice eq '') {
       open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
       print(OUT 'lonSupportEMail'."\t".$choice."\n");
       close(OUT);
       $lonSupportEMail=$choice;
       $flag=1;
     }
     else {
       print "Invalid input (this either needs to be blank, or look like an e-mail address!).\n";
     }
   }
   
   # get protocol
   # accept if valid, if not valid, tell user and repeat
   $flag=0;
   while (!$flag) {
     print(&lt;&lt;END);
   
   ****  Web Server Protocol ****
   If you plan to run the Apache server with SSL enabled, 
   the protocol should be: https; otherwise it should be http.
   ENTER WEB SERVER PROTOCOL [http]:
   END
   
     my $choice=&lt;&gt;;
     chomp($choice);
     if ($choice =~ /^https?$/) {
       open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
       print(OUT 'protocol'."\t".$choice."\n");
       close(OUT);
       $protocol=$choice;
       $flag=1;
     } elsif ($choice eq '') {
       open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
       print(OUT 'protocol'."\t".'http'."\n");
       close(OUT);
       $protocol = 'http';
       $flag = 1;
     } else {
       print "Invalid input (only http or https allowed).\n";
     }
   }
   
   # get internet domain
   # accept if valid, if not valid, tell user and repeat
   $flag=0;
   while (!$flag) {
     print(&lt;&lt;END);
   
   ****  Internet Domain Name of Your Institution ****
   
   The internet domain name used for servers at your institution 
   should be provided.  This will be similar to: ustate.edu or
   topcollege.ac.uk or myhostingcompany.com, i.e., the part of
   a server hostname which indicates to which organization the 
   server belongs.
   
   ENTER INTERNET DOMAIN NAME:
   END
   
     my $choice=&lt;&gt;;
     chomp($choice);
     if ($choice =~/[^.]+\.[^.]+/) {
       open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
       print(OUT 'internet domain'."\t".$choice."\n");
       close(OUT);
       $intdom=$choice;
       $flag=1;
     }
     else {
       print "Invalid input (must be at least two levels separated by .  - e.g., ustate.edu).\n";
     }
   }
   
   # get hostname
   # accept if valid, if not valid, tell user and repeat
   $flag=0;
   my $posshostname;
   if (($hostname =~ /^[A-Za-z0-9\-]+$/) && ($intdom ne '')) {
       $posshostname = $hostname.'.'.$intdom;
   } 
   if (($hostname =~ /^[A-Za-z0-9\-]+\.[A-Za-z0-9\-]+/) &&
       ($hostname =~ /^[A-Za-z0-9.\-]+$/)) {
       $posshostname = $hostname;
   }
   while (!$flag) {
     print(&lt;&lt;END);
   
   ****** Hostname of the server/VM *****
   
   The hostname of the server/VM is required. This will be similar to:
   somename.ustate.edu or somename.department.ustate.edu, and would be
   the web address which users would point their web browsers at to
   access the server.
   
   END
   
   if ($posshostname) {
       print "ENTER HOSTNAME OF SERVER [$posshostname]:\n";
   } else {
       print "ENTER HOSTNAME OF SERVER:\n";
   }
   
     my $choice=&lt;&gt;;
     chomp($choice);
     if (($choice =~ /^[A-Za-z0-9\-]+\.[A-Za-z0-9\-]+/) &&
         ($choice =~ /^[A-Za-z0-9.\-]+$/)) {
       open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
       print(OUT 'hostname'."\t".$choice."\n");
       close(OUT);
       $desiredhostname=$choice;
       $flag=1;
     } elsif (($choice eq '') && ($posshostname ne '')) {
       open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
       print(OUT 'hostname'."\t$posshostname\n");
       close(OUT);
       $desiredhostname = $posshostname;
       $flag = 1;
     } else {
       print "Invalid input (only letters, numbers, - and . allowed, with at least one .).\n";
     }
   }
   
   &ssl_info();
   
   $country = &get_country($desiredhostname);
   
   $state = &get_state();
   
   $city = &get_city();
   
   ($domainDescription,$country,$state,$city) = &confirm_locality($domainDescription,$country,$state,$city);
   
   my $perlstaticref = &get_static_config();
   if (ref($perlstaticref) eq 'HASH') {
     my ($certsdir,$privkey,$connectcsr,$replicatecsr);
     $certsdir = $perlstaticref-&gt;{'lonCertificateDirectory'};
     $privkey = $perlstaticref-&gt;{'lonnetPrivateKey'};
     $connectcsr = $perlstaticref-&gt;{'lonnetCertificate'};
     $connectcsr =~ s/\.pem$/.csr/;
     $replicatecsr = $perlstaticref-&gt;{'lonnetHostnameCertificate'};
     $replicatecsr =~ s/\.pem$/.csr/;
   
     print(&lt;&lt;END);
   
   ****** SSL Certificates *****
   
   You need to provide a password to be used for the openssl key which
   will be stored in $certsdir, and will be used when creating two
   certificate signing requests: $connectcsr and $replicatecsr
   
   END
   
     my $sslkeypass = &get_new_sslkeypass();
   
     if ($certsdir && $privkey) {
       my $connectsubj = "/C=$country/ST=$state/O=$domainDescription/L=$city/CN=$lonHostID/OU=LONCAPA/emailAddress=$lonAdmEMail";
       my $replicatesubj = "/C=$country/ST=$state/O=$domainDescription/L=$city/CN=internal-$desiredhostname/OU=LONCAPA/emailAddress=$lonAdmEMail";
   
   # generate SSL key
       &make_key($certsdir,$privkey,$sslkeypass);
   # generate SSL csr for hostID
       &make_host_csr($certsdir,$sslkeypass,$connectcsr,$connectsubj);
   # generate SSL csr for internal hostname
       &make_hostname_csr($certsdir,$sslkeypass,$replicatecsr,$replicatesubj);
   # mail csr files to certificate@lon-capa.org (production or dev clusters).
       &mail_csr('both',$lonCluster,$lonHostID,$desiredhostname,$certsdir,$connectcsr,$replicatecsr,$perlstaticref);
   
       } else {
           print "Could not acquire standard names for SSL Certificate files from loncapa_apache.conf\n";
       }
   } else {
       print "Could not acquire standard names for SSL Certificate files from loncapa_apache.conf\n";
   }
   
 # update loncapa.conf  # update loncapa.conf
 my $confdir='/etc/httpd/conf/';  my $confdir = '/etc/httpd/conf/';
 #my $confdir='';  if ('<DIST />' eq 'sles10' || '<DIST />' eq 'sles11' || '<DIST />' eq 'sles12' || '<DIST />' eq 'sles15' || '<DIST />' eq 'suse10.1' || '<DIST />' eq 'suse10.2' || '<DIST />' eq 'suse10.3' || '<DIST />' eq 'suse11.1' || '<DIST />' eq 'suse11.2' || '<DIST />' eq 'suse11.3' || '<DIST />' eq 'suse11.4' || '<DIST />' eq 'suse12.1' || '<DIST />' eq 'suse12.2' || '<DIST />' eq 'suse12.3' || '<DIST />' eq 'suse13.1' || '<DIST />' eq 'suse13.2' || '<DIST />' eq 'debian5' || '<DIST />' eq 'debian6' || '<DIST />' eq 'ubuntu6' || '<DIST />' eq 'ubuntu8' || '<DIST />' eq 'ubuntu10' || '<DIST />' eq 'ubuntu12' || '<DIST />' eq 'ubuntu14' || '<DIST />' eq 'ubuntu16' || '<DIST />' eq 'ubuntu18') {
        $confdir = '/etc/apache2/';
   }   
 my $filename='loncapa.conf';  my $filename='loncapa.conf';
 my %perlvar;  my %perlvar;
     if (-e "$confdir$filename") {      if (-e "$confdir$filename") {
Line 263  my %perlvar; Line 1320  my %perlvar;
     $perlvar{'lonHostID'}=$lonHostID;      $perlvar{'lonHostID'}=$lonHostID;
     $perlvar{'lonDefDomain'}=$lonDefDomain;      $perlvar{'lonDefDomain'}=$lonDefDomain;
     $perlvar{'lonAdmEMail'}=$lonAdmEMail;      $perlvar{'lonAdmEMail'}=$lonAdmEMail;
       $perlvar{'lonSupportEMail'}=$lonSupportEMail;
     $perlvar{'lonRole'}=$lonRole;      $perlvar{'lonRole'}=$lonRole;
     unless ($perlvar{'lonSqlAccess'}) {      unless ($perlvar{'lonLoadLim'} and $perlvar{'lonLoadLim'}!~/\{\[\[\[\[/) {
        $perlvar{'lonSqlAccess'}='localhostkey';  
     }  
     unless ($perlvar{'lonLoadLim'}) {  
        $perlvar{'lonLoadLim'}='2.00';         $perlvar{'lonLoadLim'}='2.00';
     }      }
     unless ($perlvar{'lonExpire'}) {      unless ($perlvar{'lonUserLoadLim'} and $perlvar{'lonUserLoadLim'}!~/\{\[\[\[\[/) {
          $perlvar{'lonUserLoadLim'}='0';
       }
       unless ($perlvar{'lonExpire'} and $perlvar{'lonExpire'}!~/\{\[\[\[\[/) {
        $perlvar{'lonExpire'}='86400';         $perlvar{'lonExpire'}='86400';
     }      }
     unless ($perlvar{'lonReceipt'}) {      unless ($perlvar{'lonReceipt'} and $perlvar{'lonReceipt'}!~/\{\[\[\[\[/) {
        my $lonReceipt='';         my $lonReceipt='';
        srand(time ^ $$ ^ unpack "%L*", `ps axww | gzip`);         srand(time ^ $$ ^ unpack "%L*", `ps axww | gzip`);
        my @alnum=(0..9,a..z);         my @alnum=(0..9,"a".."z");
        foreach my $i (1..20) {         foreach my $i (1..20) {
  $lonReceipt.=$alnum[int(rand(36))];   $lonReceipt.=$alnum[int(rand(36))];
        }         }
Line 286  my %perlvar; Line 1344  my %perlvar;
       die("Cannot output to $confdir$filename\n");        die("Cannot output to $confdir$filename\n");
     foreach my $key (keys %perlvar) {      foreach my $key (keys %perlvar) {
       my $value=$perlvar{$key};        my $value=$perlvar{$key};
         my $line = "PerlSetVar     $key      $value"; 
         if ($value eq '') {
             $line = '#'.$line;
         }
       print(OUT &lt;&lt;END);        print(OUT &lt;&lt;END);
 PerlSetVar     $key      $value  $line
 END  END
     }      }
     close(OUT);      close(OUT);
Line 295  END Line 1357  END
 </perlscript>  </perlscript>
 </file>  </file>
 <file>  <file>
 <target dist='default'>/</target>  <target dist='default'>/etc/httpd/conf/</target>
   <target dist='sles10 sles11 sles12 sles15 suse10.1 suse10.2 suse10.3 suse11.1 suse11.2 suse11.3 suse11.4 suse12.1 suse12.2 suse12.3 suse13.1 suse13.2 debian5 debian6 ubuntu6 ubuntu8 ubuntu10 ubuntu12 ubuntu14 ubuntu16 ubuntu18'>/etc/apache2/</target>
 <perlscript mode='fg'>  <perlscript mode='fg'>
 # read values from loncapa.conf  # read values from loncapa.conf
 my $confdir='/etc/httpd/conf/';  my $confdir = "<TARGET />";
 #my $confdir='';  
 my $filename='loncapa.conf';  my $filename='loncapa.conf';
 my %perlvar;  my %perlvar;
     if (-e "$confdir$filename") {      if (-e "$confdir$filename") {
Line 314  my %perlvar; Line 1376  my %perlvar;
  }   }
  close(CONFIG);   close(CONFIG);
     }      }
 my %perlvarstatic;      unless ($perlvar{'lonLoadLim'} and $perlvar{'lonLoadLim'}!~/\{\[\[\[\[/) {
     if (-e "${confdir}loncapa_apache.conf") {         $perlvar{'lonLoadLim'}='2.00';
  open(CONFIG,'&lt;'.$confdir.'loncapa_apache.conf') or       }
           die("Can't read ${confdir}loncapa_apache.conf");      unless ($perlvar{'lonUserLoadLim'} and $perlvar{'lonUserLoadLim'}!~/\{\[\[\[\[/) {
  while (my $configline=&lt;CONFIG&gt;) {         $perlvar{'lonUserLoadLim'}='0';
     if ($configline =~ /^[^\#]*PerlSetVar/) {      }
  my ($unused,$varname,$varvalue)=split(/\s+/,$configline);      unless ($perlvar{'lonExpire'} and $perlvar{'lonExpire'}!~/\{\[\[\[\[/) {
  chomp($varvalue);         $perlvar{'lonExpire'}='86400';
  $perlvarstatic{$varname}=$varvalue;      }
       unless ($perlvar{'londAllowInsecure'} and $perlvar{'londAllowInsecure'}!~/\{\[\[\[\[/) {
          $perlvar{'londAllowInsecure'}='1';
       }
       unless ($perlvar{'loncAllowInsecure'} and $perlvar{'loncAllowInsecure'}!~/\{\[\[\[\[/) {
          $perlvar{'loncAllowInsecure'}='1';
       }
       my ($securestatus,$securenum)=&securesetting(%perlvar);
       unless ($perlvar{'lonReceipt'} and $perlvar{'lonReceipt'}!~/\{\[\[\[\[/) {
          my $lonReceipt='';
          srand(time ^ $$ ^ unpack "%L*", `ps axww | gzip`);
          my @alnum=(0..9,"a".."z");
          foreach my $i (1..20) {
    $lonReceipt.=$alnum[int(rand(36))];
          }
          $perlvar{'lonReceipt'}=$lonReceipt;
       }
       my $perlvarstatic = &get_static_config();
   
       my (@hosts_files, @domain_files);
       if ( $lonCluster ne 'existing') {
    push(@domain_files,'../'.$lonCluster.'_domain.tab',
        '../'.$lonCluster.'_dns_domain.tab');
    push(@hosts_files,'../'.$lonCluster.'_hosts.tab',
        '../'.$lonCluster.'_dns_hosts.tab');
       }
       push(@domain_files,'/home/httpd/lonTabs/domain.tab',
            '/home/httpd/lonTabs/dns_domain.tab');
       push(@hosts_files,'/home/httpd/lonTabs/hosts.tab',
            '/home/httpd/lonTabs/dns_hosts.tab');
   
       my @poss_hosts_files = @hosts_files;
       if (!$domainDescription) {
    foreach my $file (@domain_files) {
       open(IN,'&lt;'.$file);
       while(my $line = &lt;IN&gt;) {
    if ($line =~ /^\Q$perlvar{'lonDefDomain'}\E\:/) {
       (undef,$domainDescription,$domainTabExtras)=split(/:/,$line,3);
       chomp($domainDescription);
       chomp($domainTabExtras);
       # the remaining field (primary lib server) is handled later
       $domainTabExtras = join(':',(split(/:/,$domainTabExtras))[0..5]);
       last;
    }
     }      }
       close(IN);
       last if ($domainDescription);
  }   }
  close(CONFIG);  
     }      }
   
       if ((!$protocol) || (!$desiredhostname)) {
           foreach my $file (@hosts_files) {
               open(IN,'&lt;'.$file);
               while(my $line = &lt;IN&gt;) {
                   if ($line =~ /^\Q$perlvar{'lonHostID'}\E:\Q$perlvar{'lonDefDomain'}\E\:(?:access|library)\:([^:]+)\:(https?)/) {
                       if (!$desiredhostname) {
                           $desiredhostname = $1;
                       }
                       if (!$protocol) { 
                           $protocol = $2;
                           chomp($protocol);
                       }
                       last;
                   }
               }
           }
       }
   
       if (!$protocol) {
           $protocol = 'http';
       }
   
       if (!$intdom) {
           foreach my $file (@hosts_files) {
               open(IN,'&lt;'.$file);
               while(my $line = &lt;IN&gt;) {
                   if ($line =~ /^\Q$perlvar{'lonHostID'}\E:\Q$perlvar{'lonDefDomain'}\E\:(?:access|library)\:[^:]+\:https?\:([^:]+)/) {
                       $intdom = $1;
                       chomp($intdom);
                       last;
                   }
               }
           }
       }
   
       my (%hostnames,%protocols);
       while(!$primaryLibServer && (@hosts_files || @domain_files)) {
    my $file = shift(@domain_files);
           open(IN,'&lt;'.$file);
           while(my $line = &lt;IN&gt;) {
               if ($line =~ /^\Q$perlvar{'lonDefDomain'}\E\:/) {
    $primaryLibServer=(split(/:/,$line))[8];
                   chomp($primaryLibServer);
               }
           }
           close(IN);
    last if ($primaryLibServer);
    $file = shift(@hosts_files);
    open(IN,'&lt;'.$file);
    while(my $line = &lt;IN&gt;) {
       if ($line =~ /^([^\:]+)\:\Q$perlvar{'lonDefDomain'}\E\:library\:([^\:]+)/) {
    push(@libservers,$1);
                   $hostnames{$1} = $2;
       }
    }
    # make list unique
    @libservers = keys(%{{ map { $_ =&gt; 1 } (@libservers) }});
    close(IN);
    if (@libservers == 1) {
       $primaryLibServer = $libservers[0];
    }
       }
   
   # get hostname of primaryLibServer
       my ($primary_hostname,$primary_protocol);
       if ($primaryLibServer) {
           if ($hostnames{$primaryLibServer}) {
               $primary_hostname = $hostnames{$primaryLibServer};
               $primary_protocol = $protocols{$primaryLibServer};
           } else {
               foreach my $file (@poss_hosts_files) {
                   open(IN,'&lt;'.$file);
                   while (my $line = &lt;IN&gt;) {
                       if ($line =~ /^([^\:]+)\:\Q$perlvar{'lonDefDomain'}\E\:library\:([^\:]+):(https?)/) {
                           if ($1 eq $primaryLibServer) {
                               $primary_hostname = $2;
                               $primary_protocol = $3;
                               last;
                           }
                       }
                   }
                   close(IN);
                   last if ($primary_hostname);
               }
           }
       }
      
 # implement editing logic below, interactively  # implement editing logic below, interactively
 # update loncapa.conf until 7 is entered  # update loncapa.conf until 18 is entered
   
   my $flag=0;
   
   #
   # Changes to 5, 6, and 14 not supported if configuration.db set on primary library server.
   # (requires either this machine to be primary library server or for LON-CAPA and Apache
   # to be running on primary library server).
   #
   
   my ($isprimary,$domconf,$url,$gotdomconf,$adminmail,$supportmail,$connectssl,%setbygui);
   if ($primaryLibServer eq $perlvar{'lonHostID'}) {
       $isprimary = 1;
   } else {
       unless ($primary_protocol eq 'https') {
           $primary_protocol = 'http';
       } 
       $url = $primary_protocol.'://'.$primary_hostname.'/cgi-bin/listdomconfig.pl';
   }
   
   my %sslnames = &get_sslnames();
   my %ssldesc = &get_ssldesc();
   
   my $domconf = &get_domain_config($perlvar{'lonDefDomain'},$primaryLibServer,$isprimary,
                                    $url,$perlvarstatic);
   if (ref($domconf)) {
       $gotdomconf = 1;
       if (ref($domconf-&gt;{'contacts'}) eq 'HASH') {
           if (exists($domconf-&gt;{'contacts'}-&gt;{'adminemail'})) {
               $adminmail = $domconf-&gt;{'contacts'}-&gt;{'adminemail'};
           }
           if (exists($domconf->{'contacts'}->{'supportemail'})) {
               $supportmail = $domconf-&gt;{'contacts'}-&gt;{'supportemail'};
           }
       }
       if (ref($domconf-&gt;{'ssl'}) eq 'HASH') {
           foreach my $connect ('connto','connfrom') { 
               if (ref($domconf-&gt;{'ssl'}-&gt;{$connect}) eq 'HASH') {       
                   my ($sslreq,$sslnoreq,$currsetting);
                   my %contypes; 
                   foreach my $type ('dom','intdom','other') {
                       my $key;
                       if ($domconf-&gt;{'ssl'}-&gt;{'connect'}-&gt;{$type} eq 'req') {
                           $key = 'yes';
                       } else {
                           $key = 'no';
                       }
                       if ($type eq 'dom') {
                           $contypes{$key} .= ' own domain,';
                       } elsif ($type eq 'intdom') {
                           $contypes{$key} .= ' own institution,';
                       } elsif ($type eq 'other') { 
                           $contypes{$key} .= ' other domains,';
                       }
                   }
                   foreach my $key (sort(keys(%contypes))) {
                       $contypes{$key} =~ s/^\s//;
                       $contypes{$key} =~ s/,$//;
                       if ($key eq 'yes') {
                           $currsetting .= ' Yes ('.$contypes{$key}.'),';
                       } elsif ($key eq 'no') {
                           $currsetting .= ' No ('.$contypes{$key}.')';
                       }
                       $currsetting =~ s/,$//;
                   }
                   if ($currsetting ne '') {
                       $connectssl = $sslnames{$connect}.' -- '.$currsetting.' | '; 
                   }
               }
           }
           $connectssl =~ s/\s\|\s$//; 
       }
   }
   if ($connectssl) {
       $setbygui{'securestatus'} = 1;
       $securestatus = 'Set by domain configuration via web GUI. Currently: '.$connectssl; 
   }
   if ($adminmail) {
       $adminmail = 'Set by domain configuration via web GUI. Currently: '.$adminmail;
       $setbygui{'lonAdmEMail'} = 1;
   } else {
       $adminmail = $perlvar{'lonAdmEMail'};
   }
   if ($supportmail) {
       $supportmail = 'Set by domain configuration via web GUI. Currently: '.$supportmail;
       $setbygui{'lonSupportEMail'} = 1;
   } else {
       $supportmail = $perlvar{'lonSupportEMail'};
   }
   
   print "\nRetrieving status information for SSL key and certificates ...\n\n";
   my ($certinfo,$lonkeystatus,$lonhostcertstatus,$lonhostnamecertstatus,$sslref) = 
       &get_cert_status($perlvar{'lonHostID'},$desiredhostname,$perlvarstatic);
   print $certinfo;
   my %sslstatus;
   if (ref($sslref) eq 'HASH') {
       %sslstatus = %{$sslref};
   }
   
 $flag=0;  
 while (!$flag) {  while (!$flag) {
   print(&lt;&lt;END);    print(&lt;&lt;END);
   
 ===============================================================================  ===============================================================================
 This is now the current configuration of your machine.  This is now the current configuration of your machine.
 1) Domain Name: $perlvar{'lonDefDomain'}   1) Domain Name: $perlvar{'lonDefDomain'}
 2) Machine Name: $perlvar{'lonHostID'}   2) Domain Description: $domainDescription
 3) System Administrator's E-mail Address: $perlvar{'lonAdmEMail'}   3) Machine Name: $perlvar{'lonHostID'}
 4) Role: $perlvar{'lonRole'}   4) ID of primary library server for domain: $primaryLibServer
 5) Cache Expiration Time: $perlvar{'lonExpire'}   5) Server Administrator's E-mail Address: $adminmail
 6) Server Load: $perlvar{'lonLoadLim'}   6) Support E-mail Address: $supportmail
 7) Everything is correct up above   7) Web Server Protocol (http or https): $protocol 
 END   8) Internet Domain Name: $intdom 
    9) Hostname: $desiredhostname
   10) Role: $perlvar{'lonRole'}
   11) Cache Expiration Time: $perlvar{'lonExpire'} (seconds)
   12) Server Load: $perlvar{'lonLoadLim'}
   13) User Load: $perlvar{'lonUserLoadLim'}
   14) LON-CAPA "internal" connections: $securestatus
   15) Private Key for SSL: $lonkeystatus
   16) SSL Certificate for LON-CAPA server connections: $lonhostcertstatus
   17) SSL Certificate for Content Replication: $lonhostnamecertstatus
   18) Everything is correct up above
   END
   
   my @error;
   foreach my $v ($perlvar{'lonDefDomain'},$perlvar{'lonHostID'}) {
      if (length($v)&gt;35) { push(@error,"Name $v too long"); }
      if (length($v)&lt;2) { push(@error,"Name $v too short"); }
      if ($v=~/capa/i) {
    if ($v!~/^oucapa\d+$/ && 
       ($v!~/^capa\d+$/ && $perlvar{'lonDefDomain'} eq 'uwsp')) {
    push(@error,"Name $v contains 'capa'");
    }
      }
      foreach my $bad ('res','raw','userfiles','priv','adm','uploaded',
    'editupload') {
         push(@error,"\nName $v reserved.") if $v eq $bad;
      }
      if ($v=~/[^\w\-.]/) { push(@error,"Name $v contains special characters"); }
   }
   if ($domainDescription =~ /^\s*$/) {
      push(@error,"Domain Description is blank.");
   } elsif ($domainDescription!~/^[\(\)\-\w\s,]+$/) {
      push(@error,"Domain Description contains special characters.");
   } 
   foreach my $v ($perlvar{'lonExpire'},$perlvar{'lonLoadLim'}) {
      unless ($v=~/^[\d+\.]+$/) { push(@error,"Number expected instead of $v"); }
   }
   unless (($perlvar{'lonRole'} eq 'library') || ($perlvar{'lonRole'} eq 'access')) {
      push(@error,"Invalid Role");
   }
   
   unless (($protocol eq 'http') || ($protocol eq 'https')) {
      push(@error,"Invalid Protocol (must be http or https");
   }
   
   if (!defined($intdom)) { 
      push(@error,"No internet domain name designated. Enter something like ustate.edu"); 
   } elsif ($intdom !~ /[^.]+\.\w{2,6}$/) {
      push(@error,"Invalid Internet domain name (must be at least two levels separated by .  - e.g., ustate.edu");
   }
   
   if (!defined($primaryLibServer)) {
      if (@libservers &gt; 0) {
          push(@error,"No primary library server ID designated. Choose from: ".join(',',sort(@libservers)));
      } else {
          push(@error,"No library servers in this domain (including current server)");
      }
   } else {
      if (length($primaryLibServer)&gt;35) { push(@error,"Primary Library Server ID:  $primaryLibServer too long"); }
      if (length($primaryLibServer)&lt;2) { push(@error,"Primary Library Server ID:  $primaryLibServer too short"); }
      if ($primaryLibServer =~/capa/i) {
           if ($primaryLibServer!~/^oucapa\d+$/ &&
               ($primaryLibServer!~/^capa\d+$/ && $perlvar{'lonDefDomain'} eq 'uwsp')) {
                    push(@error,"Primary library server ID $primaryLibServer contains 'capa'")
           }
      }
      foreach my $bad ('res','raw','userfiles','priv','adm','uploaded',
           'editupload') {
         push(@error,"Primary library server ID $primaryLibServer reserved.") if $primaryLibServer eq $bad;
      }
      if ($primaryLibServer=~/[^\w\-.]/) { push(@error,"Primary library server ID $primaryLibServer contains special characters"); }
   }
   
   
   my ($certsdir,$privkey,$connectcsr,$replicatecsr);
   $certsdir = $perlvarstatic-&gt;{'lonCertificateDirectory'};
   $privkey = $perlvarstatic-&gt;{'lonnetPrivateKey'};
   $connectcsr = $perlvarstatic-&gt;{'lonnetCertificate'};
   $connectcsr =~ s/\.pem$/.csr/;
   $replicatecsr = $perlvarstatic-&gt;{'lonnetHostnameCertificate'};
   $replicatecsr =~ s/\.pem$/.csr/;
   
   if (@error) { print "\n*** ERRORS: \n\t".join("\n\t",@error)."\n"; }
   print(&lt;&lt;END);    print(&lt;&lt;END);
 ENTER A CHOICE OF 1-6 TO CHANGE, otherwise ENTER 7:  ENTER A CHOICE OF 1-17 TO CHANGE, otherwise ENTER 18:
 END  END
 my $choice=&lt;&gt;;  my $choice=&lt;&gt;;
 chomp($choice);  chomp($choice);
   if ($choice==1) {    if ($choice==1) {
   print(&lt;&lt;END);    print(&lt;&lt;END);
 2) Domain Name: $perlvar{'lonDefDomain'}  1) Domain Name: $perlvar{'lonDefDomain'}
 ENTER NEW VALUE:  ENTER NEW VALUE (this is an internal value used to identify a group of
                    LON-CAPA machines, it must be alphanumerical, we suggest
                    using a part of your actual DNS domain. For example, for
                    the machine loncapa.msu.edu, we set the Domain to msu):
 END  END
     my $choice2=&lt;&gt;;      my $choice2=&lt;&gt;;
     chomp($choice2);      chomp($choice2);
Line 360  END Line 1735  END
   }    }
   elsif ($choice==2) {    elsif ($choice==2) {
   print(&lt;&lt;END);    print(&lt;&lt;END);
 1) Machine Name: $perlvar{'lonHostID'}  2) Domain Description: $domainDescription
 ENTER NEW VALUE:  ENTER NEW VALUE (this should be a string that describes your domain, spaces
                    and punctuation are fine except for ':'):
 END  END
     my $choice2=&lt;&gt;;      my $choice2=&lt;&gt;;
     chomp($choice2);      chomp($choice2);
     $perlvar{'lonHostID'}=$choice2;      $domainDescription=$choice2;
   }    }
   elsif ($choice==3) {    elsif ($choice==3) {
   print(&lt;&lt;END);    print(&lt;&lt;END);
 3) System Administrator's E-mail Address: $perlvar{'lonAdmEMail'}  3) Machine Name: $perlvar{'lonHostID'}
 ENTER NEW VALUE:  ENTER NEW VALUE (this will be the name of the machine in the LON-CAPA network
                    it cannot contain any of '_' '-' '.' or ':'. We suggest that
                    if you are in the domain 'example' and are the first library
                    server you enter 'examplel1') :
 END  END
     my $choice2=&lt;&gt;;      my $choice2=&lt;&gt;;
     chomp($choice2);      chomp($choice2);
     $perlvar{'lonAdmEMail'}=$choice2;      $perlvar{'lonHostID'}=$choice2;
   }    }
   elsif ($choice==4) {    elsif ($choice==4) {
   print(&lt;&lt;END);    print(&lt;&lt;END);
 4) Role: $perlvar{'lonRole'}  4) ID of primary library server for domain: $primaryLibServer
 ENTER NEW VALUE:  ENTER NEW VALUE (this will be the LON-CAPA Machine ID of a library server in
                    your domain; it cannot contain any of '_' '-' '.' or ':'. 
                    This server will be where domain data which are not 
                    associated with any specific home library server
                    will be stored (e.g., e-mail broadcast by Domain Coordinators
                    to users in the domain).
 END  END
     my $choice2=&lt;&gt;;      my $choice2=&lt;&gt;;
     chomp($choice2);      chomp($choice2);
     $perlvar{'lonRole'}=$choice2;      $primaryLibServer=$choice2;
   }    }
   elsif ($choice==5) {    elsif ($choice==5) {
       if ($setbygui{'lonAdmEMail'}) {
         print(&lt;&lt;END);
   5) Server Administrator's E-mail Address: $adminmail
   Use the web GUI (as domain coordinator) to make changes after completing the UPDATE.
   END
       } else {
         print(&lt;&lt;END);
   5) Server Administrator's E-mail Address: $perlvar{'lonAdmEMail'}
   ENTER NEW VALUE:
   END
         my $choice2=&lt;&gt;;
         chomp($choice2);
         $perlvar{'lonAdmEMail'}=$choice2;
         $adminmail=$perlvar{'lonAdmEMail'};
       }
     }
     elsif ($choice==6) {
       if ($setbygui{'lonSupportEMail'}) {
         print(&lt;&lt;END);
   6) Support E-mail Address: $supportmail
   Use the web GUI (as domain coordinator) to make changes after completing the UPDATE.
   END
       } else {    
         print(&lt;&lt;END);
   6) Support E-mail Address: $perlvar{'lonSupportEMail'}
   ENTER NEW VALUE:
   END
         my $choice2=&lt;&gt;;
         chomp($choice2);
         $perlvar{'lonSupportEMail'}=$choice2;
         $supportmail=$perlvar{'lonSupportEMail'};
       }
     }
     elsif ($choice==7) {
   print(&lt;&lt;END);    print(&lt;&lt;END);
 5) Cache Expiration Time: $perlvar{'lonExpire'}  7) Server Protocol (http or https): 
   ENTER NEW VALUE: (this should be either 'http' or 'https'
                    if in doubt set to 'http'):
   END
       my $choice2=&lt;&gt;;
       chomp($choice2);
       $protocol=$choice2;
     }
     elsif ($choice==8) {
     print(&lt;&lt;END);
   8) Internet Domain Name of Institution
   ENTER NEW VALUE: 
   
   END
       my $choice2=&lt;&gt;;
       chomp($choice2);
       $intdom=$choice2;
     }
     elsif ($choice==9) {
     print(&lt;&lt;END);
   9) Hostname of Server/VM
 ENTER NEW VALUE:  ENTER NEW VALUE:
   
   END
       my $choice2=&lt;&gt;;
       chomp($choice2);
       $desiredhostname=$choice2;
     }
   
     elsif ($choice==10) {
     print(&lt;&lt;END);
   10) Role: $perlvar{'lonRole'}
   ENTER NEW VALUE (this should be either 'access' or 'library' 
                    if in doubt select 'library'):
   END
       my $choice2=&lt;&gt;;
       chomp($choice2);
       $perlvar{'lonRole'}=$choice2;
     }
     elsif ($choice==11) {
     print(&lt;&lt;END);
   11) Cache Expiration Time: $perlvar{'lonExpire'}
   ENTER NEW VALUE (in seconds, 86400 is a reasonable value):
 END  END
     my $choice2=&lt;&gt;;      my $choice2=&lt;&gt;;
     chomp($choice2);      chomp($choice2);
     $perlvar{'lonExpire'}=$choice2;      $perlvar{'lonExpire'}=$choice2;
   }    }
   elsif ($choice==6) {    elsif ($choice==12) {
   print(&lt;&lt;END);    print(&lt;&lt;END);
 6) Server Load: $perlvar{'lonLoadLim'}  12) Server Load: $perlvar{'lonLoadLim'}
 ENTER NEW VALUE:  ENTER NEW VALUE:
 END  END
     my $choice2=&lt;&gt;;      my $choice2=&lt;&gt;;
     chomp($choice2);      chomp($choice2);
     $perlvar{'lonLoadLim'}=$choice2;      $perlvar{'lonLoadLim'}=$choice2;
   }    }
   elsif ($choice==7) {    elsif ($choice==13) {
     $flag=1;    print(&lt;&lt;END);
   13) User Load: $perlvar{'lonUserLoadLim'}
   Numer of users that can login before machine is 'overloaded'
   ENTER NEW VALUE (integer value, 0 means there is no limit):
   END
       my $choice2=&lt;&gt;;
       chomp($choice2);
       $perlvar{'lonUserLoadLim'}=$choice2;
   }    }
   else {    elsif ($choice==14) {
       if ($setbygui{'securestatus'}) {
         print(&lt;&lt;END);
   14) Allow only secure connections: $securestatus
   Use the web GUI (as domain coordinator) to make changes after completing the UPDATE.
   END
       } else {
         print(&lt;&lt;END);
   14) Allow only secure connections: $securestatus 
   The Lon-CAPA communication daemons lonc and lond can be configured to
   allow only secure connections by default.
   
   POSSIBLE CHOICES:
   1) allow only secure connections and don't connect to machines that
       can not be connected to securely
   2) allow only secure connections but allow this machine to connect to 
       machines that don't support secure connections
   3) allow insecure connections to this machine but only allow connections
       to machines that support secure connections
   4) allow insecure connections
   ENTER NEW VALUE (currently $securenum):
   END
         my $choice2=&lt;&gt;;
         chomp($choice2);
         if      ($choice2 eq '1') {
     $perlvar{'loncAllowInsecure'}=0;$perlvar{'londAllowInsecure'}=0;
         } elsif ($choice2 eq '2') {
     $perlvar{'loncAllowInsecure'}=0;$perlvar{'londAllowInsecure'}=1;
         } elsif ($choice2 eq '3') {
     $perlvar{'loncAllowInsecure'}=1;$perlvar{'londAllowInsecure'}=0;
         } elsif ($choice2 eq '4') {
     $perlvar{'loncAllowInsecure'}=1;$perlvar{'londAllowInsecure'}=1;
         }
         ($securestatus,$securenum)=&securesetting(%perlvar);
       }
     } elsif ($choice==15) {
         if ($sslstatus{'key'} == 1) {
             print(&lt;&lt;END);
   15) Private Key for SSL: $lonkeystatus
   
   POSSIBLE CHOICES:
   1) overwrite existing key
   2) make no change
   ENTER NEW VALUE
   END
             my $choice2=&lt;&gt;;
             chomp($choice2);
             if ($choice2 eq '1') {
                 my $sslkeypass = &get_new_sslkeypass();
                 &make_key($certsdir,$privkey,$sslkeypass);
             }
         } elsif ($sslstatus{'key'} == 0) {
             print(&lt;&lt;END);
   15) Private Key for SSL: $lonkeystatus
   END
             my $sslkeypass = &get_new_sslkeypass();
             &make_key($certsdir,$privkey,$sslkeypass);
             print "\nRetrieving status information for SSL key and certificates ...\n\n";
             ($certinfo,$lonkeystatus,$lonhostcertstatus,$lonhostnamecertstatus,$sslref) =
                &get_cert_status($perlvar{'lonHostID'},$desiredhostname,$perlvarstatic);
             if (ref($sslref) eq 'HASH') {
                 %sslstatus = %{$sslref};
             }
         }
     } elsif ($choice==16) {
         if (($sslstatus{'host'} == 1) || ($sslstatus{'host'} == 2) || ($sslstatus{'host'} == 3)) {
             print(&lt;&lt;END);
   16) SSL Certificate for LON-CAPA server connections: $lonhostcertstatus
   
   POSSIBLE CHOICES:
   1) create new certificate signing request with new key
   2) create new certificate signing request with existing key
   3) resend current certificate signing request
   4) make no change
   ENTER NEW VALUE
   END
   
             my $choice2=&lt;&gt;;
             chomp($choice2);
             if (($choice2 eq '1') || ($choice2 eq '2')) {
                 &ssl_info();
                 my $country = &get_country($desiredhostname);
                 my $state = &get_state();
                 my $city = &get_city();
                 my $connectsubj = "/C=$country/ST=$state/O=$domainDescription/L=$city/CN=$perlvar{'lonHostID'}/OU=LONCAPA/emailAddress=$adminmail";
                 ($domainDescription,$country,$state,$city) = &confirm_locality($domainDescription,$country,$state,$city);
                 my $sslkeypass;
                 if ($choice2 eq '1') {
                     $sslkeypass = &get_new_sslkeypass();
                     &make_key($certsdir,$privkey,$sslkeypass);
                 } elsif ($choice2 eq '2') {
                     $sslkeypass = &get_password('Enter existing password for SSL key');
                     &encrypt_key($certsdir,$privkey,$sslkeypass);
                 }
                 &make_host_csr($certsdir,$sslkeypass,$connectcsr,$connectsubj);
                 &mail_csr('host',$lonCluster,$perlvar{'lonHostID'},$desiredhostname,$certsdir,$connectcsr,$replicatecsr,$perlvarstatic);
                 print "\nRetrieving status information for SSL key and certificates ...\n\n";
                 ($certinfo,$lonkeystatus,$lonhostcertstatus,$lonhostnamecertstatus,$sslref) =
                     &get_cert_status($perlvar{'lonHostID'},$desiredhostname,$perlvarstatic);
                 if (ref($sslref) eq 'HASH') {
                     %sslstatus = %{$sslref};
                 }
             } elsif ($choice2 eq '3') {
                 if (-e "$certsdir/$connectcsr") {
                     &mail_csr('host',$lonCluster,$perlvar{'lonHostID'},$desiredhostname,$certsdir,$connectcsr,$replicatecsr,$perlvarstatic);
                 }
             }
         } elsif (($sslstatus{'host'} == 0) || ($sslstatus{'host'} == 4) || ($sslstatus{'host'} == 5)) {
             my $sslkeypass;
             if ($sslstatus{'key'} == 1) {
                 print(&lt;&lt;END);
   16) SSL Certificate for LON-CAPA server connections: $lonhostcertstatus
   
   POSSIBLE CHOICES:
   1) create new certificate signing request with new key
   2) create new certificate signing request with existing key
   3) make no change
   ENTER NEW VALUE
   END
                 my $choice2=&lt;&gt;;
                 chomp($choice2);
                 if ($choice2 eq '1') {
                     $sslkeypass = &get_new_sslkeypass();
                     &make_key($certsdir,$privkey,$sslkeypass);
                 } elsif ($choice2 eq '2') {
                     $sslkeypass = &get_password('Enter existing password for SSL key');
                     &encrypt_key($certsdir,$privkey,$sslkeypass);
                 }
             } else {
                 print(&lt;&lt;END);
   16) SSL Certificate for LON-CAPA server connections: $lonhostcertstatus
   END
                 $sslkeypass = &get_new_sslkeypass();
             }
             &ssl_info();
             my $country = &get_country($desiredhostname);
             my $state = &get_state();
             my $city = &get_city();
             my $connectsubj = "/C=$country/ST=$state/O=$domainDescription/L=$city/CN=$perlvar{'lonHostID'}/OU=LONCAPA/emailAddress=$adminmail";
             &make_host_csr($certsdir,$sslkeypass,$connectcsr,$connectsubj);
             &mail_csr('host',$lonCluster,$perlvar{'lonHostID'},$desiredhostname,$certsdir,$connectcsr,$replicatecsr,$perlvarstatic);
             print "\nRetrieving status information for SSL key and certificates ...\n\n";
             ($certinfo,$lonkeystatus,$lonhostcertstatus,$lonhostnamecertstatus,$sslref) =
                 &get_cert_status($perlvar{'lonHostID'},$desiredhostname,$perlvarstatic);
             if (ref($sslref) eq 'HASH') {
                 %sslstatus = %{$sslref};
             }
         }
     } elsif ($choice==17) {
         if (($sslstatus{'hostname'} == 1) || ($sslstatus{'hostname'} == 2) || ($sslstatus{'hostname'} == 3)) {
             print(&lt;&lt;END);
   17) SSL Certificate for Content Replication: $lonhostnamecertstatus
   
   POSSIBLE CHOICES:
   1) create new certificate signing request with new key
   2) create new certificate signing request with existing key
   3) resend current certificate signing request
   4) make no change
   ENTER NEW VALUE
   END
             my $choice2=&lt;&gt;;
             chomp($choice2);
             if (($choice2 eq '1') || ($choice2 eq '2')) {
                 &ssl_info();
                 my $country = &get_country($desiredhostname);
                 my $state = &get_state();
                 my $city = &get_city();
                 my $replicatesubj = "/C=$country/ST=$state/O=$domainDescription/L=$city/CN=internal-$desiredhostname/OU=LONCAPA/emailAddress=$adminmail";
                 my $sslkeypass;
                 if ($choice2 eq '1') {
                     $sslkeypass = &get_new_sslkeypass();
                     &make_key($certsdir,$privkey,$sslkeypass);
                 } elsif ($choice2 eq '2') {
                     $sslkeypass = &get_password('Enter existing password for SSL key');
                     &encrypt_key($certsdir,$privkey,$sslkeypass);
                 }
                 &make_hostname_csr($certsdir,$sslkeypass,$replicatecsr,$replicatesubj);
                 &mail_csr('hostname',$lonCluster,$perlvar{'lonHostID'},$desiredhostname,$certsdir,$connectcsr,$replicatecsr,$perlvarstatic);
                 print "\nRetrieving status information for SSL key and certificates ...\n\n";
                 ($certinfo,$lonkeystatus,$lonhostcertstatus,$lonhostnamecertstatus,$sslref) =
                     &get_cert_status($perlvar{'lonHostID'},$desiredhostname,$perlvarstatic);
                 if (ref($sslref) eq 'HASH') {
                     %sslstatus = %{$sslref};
                 }
             } elsif ($choice2 eq '3') {
                 if (-e "$certsdir/$replicatecsr") {
                     &mail_csr('hostname',$lonCluster,$perlvar{'lonHostID'},$desiredhostname,$certsdir,$connectcsr,$replicatecsr,$perlvarstatic);
                 }
             }
         } elsif (($sslstatus{'hostname'} == 0) || ($sslstatus{'hostname'} == 4) || ($sslstatus{'hostname'} == 5)) {
             my $sslkeypass;
             if ($sslstatus{'key'} == 1) {
                 print(&lt;&lt;END);
   17) SSL Certificate for Content Replication: $lonhostnamecertstatus
   
   POSSIBLE CHOICES:
   1) create new certificate signing request with new key
   2) create new certificate signing request with existing key
   3) make no change
   ENTER NEW VALUE
   END
                 my $choice2=&lt;&gt;;
                 chomp($choice2);
                 if ($choice2 eq '1') {
                     $sslkeypass = &get_new_sslkeypass();
                     &make_key($certsdir,$privkey,$sslkeypass);
                 } elsif ($choice2 eq '2') {
                     $sslkeypass = &get_password('Enter existing password for SSL key');
                     &encrypt_key($certsdir,$privkey,$sslkeypass);
                 }
             } else {
                 print(&lt;&lt;END);
   17) SSL Certificate for Content Replication: $lonhostnamecertstatus
   END
                 $sslkeypass = &get_new_sslkeypass();
             }
             &ssl_info();
             my $country = &get_country($desiredhostname);
             my $state = &get_state();
             my $city = &get_city();
             my $replicatesubj = "/C=$country/ST=$state/O=$domainDescription/L=$city/CN=internal-$desiredhostname/OU=LONCAPA/emailAddress=$adminmail";
             &make_hostname_csr($certsdir,$sslkeypass,$replicatecsr,$replicatesubj);
             &mail_csr('hostname',$lonCluster,$perlvar{'lonHostID'},$desiredhostname,$certsdir,$connectcsr,$replicatecsr,$perlvarstatic);
             print "\nRetrieving status information for SSL key and certificates ...\n\n";
             ($certinfo,$lonkeystatus,$lonhostcertstatus,$lonhostnamecertstatus,$sslref) =
                 &get_cert_status($perlvar{'lonHostID'},$desiredhostname,$perlvarstatic);
             if (ref($sslref) eq 'HASH') {
                 %sslstatus = %{$sslref};
             }
         }
     } elsif (($choice==18) && (!@error)) {
       $flag=1;
     } else {
       print "Invalid input.\n";
   }    }
 }  }
   
     open(OUT,"&gt;$confdir$filename") or      open(OUT,"&gt;$confdir$filename") or
       die("Cannot output to $confdir$filename\n");        die("Cannot output to $confdir$filename\n");
     foreach my $key (keys %perlvar) {      foreach my $key (keys %perlvar) {
       my $value=$perlvar{$key};        my $value=$perlvar{$key};
       print(OUT &lt;&lt;END) unless $perlvarstatic{$key};        my $line = "PerlSetVar     $key      $value";
 PerlSetVar     $key      $value        if ($value eq '') {
             $line = '#'.$line;
         }
         print(OUT &lt;&lt;END) unless ($perlvarstatic-&gt;{$key});
   $line
 END  END
     }      }
     close(OUT);      close(OUT);
Line 425  END Line 2128  END
 <target dist='default'>loncom/hosts.tab</target>  <target dist='default'>loncom/hosts.tab</target>
 <perlscript mode='fg'>  <perlscript mode='fg'>
 unless (-l "<TARGET />") {  unless (-l "<TARGET />") {
   print(&lt;&lt;END);    if ($desiredhostname eq '') { 
         my $hostname=`hostname -f`;chomp($hostname);
 ===============================================================================        $desiredhostname = $hostname;
 What hosts.tab would you like to have installed?    }
 (hosts.tab is a listing of all other internet machines    my $date=`date -I`; chomp($date);
 that a server system considers to be valid server systems    my $lonHostID=$perlvar{'lonHostID'};
 on the LON-CAPA network)    $lonHostID=~s/[^\w\-.]//g;
     my $lineexistflag=0;
 1) PRODUCTION - you want to deliver courses today or sometime very soon    my $hostidexistflag=0;
                 on this machine    my $line2insert=&lt;&lt;END;
 2) STAND-ALONE - you want this machine to run in 'stand-alone' mode and  $perlvar{'lonHostID'}:$perlvar{'lonDefDomain'}:$perlvar{'lonRole'}:$desiredhostname:$protocol:$intdom
                  not be connected to other LON-CAPA machines for now  END
 3) DEVELOPMENT - you want to play with or explore LON-CAPA    if (!$domainTabExtras) {
 4) PRESERVE the existing hosts.tab (/home/httpd/lonTabs/hosts.tab)   $domainTabExtras=':::::';
     }
 END    my $domaininsert="$perlvar{'lonDefDomain'}:$domainDescription:$domainTabExtras:$primaryLibServer\n";
 # Option number 26 will install rawhide_hosts.tab, but    if ($lonCluster eq 'standalone') {
 # the typical user does not want to be part of an intensive      open(OUT,'&gt;../'.$lonCluster.'_hosts.tab') or
 # machine test cluster.        die('file generation error');
         print(OUT $line2insert);
 # get input        print OUT ("^$desiredhostname:$protocol\n");
 # if valid then process, otherwise loop      close(OUT);
 my $hostname=`hostname`;chomp($hostname);      open(OUT,'&gt;../'.$lonCluster.'_dns_hosts.tab') or
 my $hostaddress=`hostname -i $hostname`;chomp($hostaddress);        die('file generation error');
 $flag=0;        print(OUT $line2insert);
 while (!$flag) {      close(OUT);
   print "ENTER 1, 2, 3, or 4:\n";      open(OUT,'&gt;../'.$lonCluster.'_domain.tab') or
   my $choice=&lt;&gt;;        die('file generation error');
   chomp($choice);        print(OUT $domaininsert);
     $line2insert=&lt;&lt;END;      close(OUT);
 $perlvar{'lonHostID'}:$perlvar{'lonDefDomain'}:$perlvar{'lonRole'}:$hostname:$hostaddress      open(OUT,'&gt;../'.$lonCluster.'_dns_domain.tab') or
 END        die('file generation error');
     $date=`date -I`; chomp($date);        print(OUT $domaininsert);
     $lonHostID=$perlvar{'lonHostID'};      close(OUT);
     $lonHostID=~s/\W//g;    }
     $lineexistflag=0;    if ($flag==1) {
     $hostidexistflag=0;  
   if ($choice==1) {  
     $lonCluster='production';  
     `rm -f ../hosts.tab`;      `rm -f ../hosts.tab`;
     open(IN,'&lt;../production_hosts.tab');      `rm -f ../dns_hosts.tab`;
     while(&lt;IN&gt;) {      `ln -s ${lonCluster}_dns_hosts.tab ../dns_hosts.tab`;
       if (/^$line2insert$/) {      open(IN,'&lt;../'.$lonCluster.'_dns_hosts.tab');
       while(my $line = &lt;IN&gt;) {
         if ($line =~ /^\Q$line2insert\E$/) {
         $lineexistflag=1;          $lineexistflag=1;
       }        }
       if (/^$perlvar{'lonHostID'}\:/) {        if ($line =~ /^\Q$lonHostID\E\:/) {
         $hostidexistflag=1;          $hostidexistflag=1;
       }        }
     }      }
Line 478  END Line 2180  END
     if ($hostidexistflag and !$lineexistflag) {      if ($hostidexistflag and !$lineexistflag) {
       print &lt;&lt;END;        print &lt;&lt;END;
 WARNING: $lonHostID already exists inside  WARNING: $lonHostID already exists inside
 loncapa/loncom/production_hosts.tab.  The entry inside  loncapa/loncom/${lonCluster}_dns_hosts.tab.  The entry inside
 production_hosts.tab does not match your settings.  ${lonCluster}_dns_hosts.tab does not match your settings.
 The entry inside production_hosts.tab is being replaced  An entry inside ${lonCluster}_hosts.tab will be made
 with your new values.  with your new values.
 END  END
       `grep -v "$lonHostID:" ../production_hosts.tab &gt; ../new_production_hosts.tab`;        `grep -v "$lonHostID:" ../${lonCluster}_hosts.tab &gt; ../new_${lonCluster}_hosts.tab`;
        open(OUT,'&gt;&gt;../new_production_hosts.tab') or         open(OUT,'&gt;&gt;../new_'.$lonCluster.'_hosts.tab') or
          die("cannot open loncom/standalone_hosts.tab for output\n");           die("cannot open loncom/${lonCluster}_hosts.tab for output\n");
          print(OUT &lt;&lt;END);           print(OUT $line2insert);
 $line2insert  
 END  
        close(OUT);         close(OUT);
       `ln -s new_production_hosts.tab ../hosts.tab`;        `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
       # email appropriate message        # email appropriate message
 #      `echo "$date" | mail -s "REPLACE:$lonHostID:$date" installrecord\@mail.lon-capa.org`;        `echo "REPLACE:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "REPLACE:$lonCluster:$lonHostID:$protocol:$intdom:$date" installrecord\@mail.lon-capa.org`;
       `echo "REPLACE:$lonHostID:date:$line2insert" | mail -s "REPLACE:$lonHostID:$date" installrecord\@mail.lon-capa.org`;  
       # "REPLACE:hostid:date"  
       # "REPLACE:hostid:date:line"  
     }      }
     elsif ($hostidexistflag and $lineexistflag) {      elsif ($hostidexistflag and $lineexistflag) {
       `ln -s production_hosts.tab ../hosts.tab`;        print &lt;&lt;END;
   Entry exists in ${lonCluster}_dns_hosts.tab. Making duplicate entry in ${lonCluster}_hosts.tab
   END
         `grep -v "$lonHostID:" ../${lonCluster}_hosts.tab &gt; ../new_${lonCluster}_hosts.tab`;
          open(OUT,'&gt;&gt;../new_'.$lonCluster.'_hosts.tab') or
            die("cannot open loncom/${lonCluster}_hosts.tab for output\n");
            print(OUT $line2insert);
          close(OUT);
         `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
         # email appropriate message
         `echo "STABLEUPDATE:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "STABLEUPDATE:$lonCluster:$lonHostID:$protocol:$intdom:$date" installrecord\@mail.lon-capa.org`;
     }      }
     elsif (!$$hostidexistflag and !$lineexistflag) {      elsif (!$hostidexistflag and !$lineexistflag) {
       `cat ../production_hosts.tab &gt; ../new_production_hosts.tab`;        print &lt;&lt;END;
       `ln -s new_production_hosts.tab &gt; ../hosts.tab`;  New entry for $lonCluster.
   END
         `cat ../${lonCluster}_hosts.tab &gt; ../new_${lonCluster}_hosts.tab`;
          open(OUT,'&gt;&gt;../new_'.$lonCluster.'_hosts.tab') or
            die("cannot open loncom/new_${lonCluster}_hosts.tab for output\n");
            print(OUT $line2insert);
          close(OUT);
         `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
         # email appropriate message
         `echo "INSERT:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "INSERT:$lonCluster:$lonHostID:$protocol:$intdom:$date" installrecord\@mail.lon-capa.org`;
     }      }
     $flag=1;  
   }    }
   elsif ($choice==2) {    $lineexistflag=0;
     $lonCluster='standalone';    my $domainexistflag=0;
     open(OUT,'&gt;../standalone_hosts.tab') or    if ($flag==1) {
       die("cannot open loncom/standalone_hosts.tab for output\n");      `rm -f ../domain.tab`;
     print(OUT &lt;&lt;END);      `rm -f ../dns_domain.tab`;
 $perlvar{'lonHostID'}:$perlvar{'lonDefDomain'}:$perlvar{'lonRole'}:$hostname:$hostaddress      `ln -s ${lonCluster}_dns_domain.tab ../dns_domain.tab`;
       open(IN,'&lt;../'.$lonCluster.'_dns_domain.tab');
       while(my $line = &lt;IN&gt;) {
         if ($line =~/^\Q$domaininsert\E$/) {
           $lineexistflag=1;
         }
         if ($line =~/^\Q$perlvar{'lonDefDomain'}\E\:/) {
           $domainexistflag=1;
         }
       }
       close(IN);
       if ($domainexistflag and !$lineexistflag) {
         print &lt;&lt;END;
   WARNING: $perlvar{'lonDefDomain'} already exists inside
   loncapa/loncom/${lonCluster}_dns_domain.tab.  The entry inside
   ${lonCluster}_dns_domain.tab does not match your settings.
   An entry will be made in inside ${lonCluster}_domain.tab
   with your new values.
 END  END
     close(OUT);        `grep -v "$perlvar{'lonDefDomain'}:" ../${lonCluster}_domain.tab &gt; ../new_${lonCluster}_domain.tab`;
     `rm -f ../hosts.tab`;         open(OUT,'&gt;&gt;../new_'.$lonCluster.'_domain.tab') or
     `ln -s standalone_hosts.tab ../hosts.tab`;           die("cannot open loncom/${lonCluster}_domain.tab for output\n");
     $flag=1;           print(OUT $domaininsert);
   }         close(OUT);
   elsif ($choice==3) {        `ln -s new_${lonCluster}_domain.tab ../domain.tab`;
     $lonCluster='development';        # email appropriate message
     `rm -f loncom/hosts.tab`;        `echo "REPLACEdom:$lonCluster:$lonHostID:$date:$domaininsert" | mail -s "REPLACEdom:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
     `ln -s development_hosts.tab ../hosts.tab`;      }
     $flag=1;      elsif ($domainexistflag and $lineexistflag) {
   }        `grep -v "$perlvar{'lonDefDomain'}:" ../${lonCluster}_domain.tab &gt; ../new_${lonCluster}_domain.tab`;
   elsif ($choice==4) {         open(OUT,'&gt;&gt;../new_'.$lonCluster.'_domain.tab') or
     $lonCluster='existing';           die("cannot open loncom/${lonCluster}_domain.tab for output\n");
     `rm -f ../hosts.tab`;           print(OUT $domaininsert);
     `touch existing_hosts.tab`;         close(OUT);
     if (-e '/home/httpd/lonTabs/hosts.tab') {        print &lt;&lt;END;
       `cp /home/httpd/lonTabs/hosts.tab ../existing_hosts.tab`;  Entry exists in ${lonCluster}_dns_domain.tab. Making duplicate entry in ${lonCluster}_domain.tab
   END
         `ln -s new_${lonCluster}_domain.tab ../domain.tab`;
         # email appropriate message
         `echo "STABLEUPDATEdom:$lonCluster:$lonHostID:$date:$domaininsert" | mail -s "STABLEUPDATEdom:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
       }
       elsif (!$domainexistflag and !$lineexistflag) {
         print &lt;&lt;END;
   New entry for $lonCluster.
   END
         `cat ../${lonCluster}_domain.tab &gt; ../new_${lonCluster}_domain.tab`;
          open(OUT,'&gt;&gt;../new_'.$lonCluster.'_domain.tab') or
            die("cannot open loncom/new_${lonCluster}_domain.tab for output\n");
            print(OUT $domaininsert);
          close(OUT);
         `ln -s new_${lonCluster}_domain.tab ../domain.tab`;
         # email appropriate message
         `echo "INSERTdom:$lonCluster:$lonHostID:$date:$domaininsert" | mail -s "INSERTdom:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
     }      }
     `ln -s existing_hosts.tab ../hosts.tab`;  
     $flag=1;  
   }  
   elsif ($choice==26) {  
     $lonCluster='rawhide';  
     `rm -f ../hosts.tab`;  
     `ln -s rawhide_hosts.tab ../hosts.tab`;  
     $flag=1;  
   }  
   else {  
   
   }    }
 }  }
   
 }  
 </perlscript>  </perlscript>
 </file>  </file>
 </files>  </files>

Removed from v.1.13  
changed lines
  Added in v.1.91


FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>