Annotation of doc/loncapafiles/updatequery.piml, revision 1.16

1.2       harris41    1: <!-- updatequery.piml -->
1.1       harris41    2: <!-- Scott Harrison -->
                      3: 
1.16    ! harris41    4: <!-- $Id: updatequery.piml,v 1.15 2002/06/09 23:31:09 harris41 Exp $ -->
1.1       harris41    5: 
                      6: <!--
                      7: 
                      8: This file is part of the LearningOnline Network with CAPA (LON-CAPA).
                      9: 
                     10: LON-CAPA is free software; you can redistribute it and/or modify
                     11: it under the terms of the GNU General Public License as published by
                     12: the Free Software Foundation; either version 2 of the License, or
                     13: (at your option) any later version.
                     14: 
                     15: LON-CAPA is distributed in the hope that it will be useful,
                     16: but WITHOUT ANY WARRANTY; without even the implied warranty of
                     17: MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
                     18: GNU General Public License for more details.
                     19: 
                     20: You should have received a copy of the GNU General Public License
                     21: along with LON-CAPA; if not, write to the Free Software
                     22: Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
                     23: 
                     24: /home/httpd/html/adm/gpl.txt
                     25: 
                     26: http://www.lon-capa.org/
                     27: 
                     28: -->
                     29: 
                     30: <piml>
                     31: <targetroot>/</targetroot>
                     32: <files>
                     33: <file>
1.4       harris41   34: <target dist='default'>/</target>
1.1       harris41   35: <perlscript mode='fg'>
1.4       harris41   36: $|=1;
1.1       harris41   37:   print(&lt;&lt;END);
                     38: 
                     39: 
                     40: *********************************************
                     41: *********************************************
                     42: ****                                     ****
                     43: **** LON-CAPA SYSTEM INFORMATION REQUEST ****
                     44: ****                                     ****
                     45: **** Please respond to the choices below ****
                     46: ****                                     ****
                     47: *********************************************
                     48: *********************************************
                     49: 
                     50: END
1.4       harris41   51: sleep(3);
1.1       harris41   52: </perlscript>
                     53: </file>
                     54: <file>
1.10      harris41   55: <target dist='default'>/home/httpd/lonTabs/hosts.tab</target>
1.1       harris41   56: <perlscript mode='fg'>
1.4       harris41   57: $|=1;
1.1       harris41   58: unless (-e "<TARGET />") {
                     59:   print(&lt;&lt;END);
                     60:            WELCOME TO LON-CAPA!
                     61: 
                     62: If you have questions, please visit http://install.lon-capa.org
1.5       harris41   63: or contact sharrison\@mail.lon-capa.org.
1.1       harris41   64: 
                     65: ===============================================================================
1.4       harris41   66: The following 4 values are needed to configure LON-CAPA:
                     67: * Machine Role
1.8       harris41   68: * LON-CAPA Domain Name
                     69: * LON-CAPA Machine ID Name, and
1.1       harris41   70: * System Administration E-mail Address.
                     71: END
1.3       harris41   72: 
1.4       harris41   73: open(OUT,'&gt;/tmp/loncapa_updatequery.out');
                     74: close(OUT);
                     75: 
1.3       harris41   76: # query for Machine Role
                     77:   print(&lt;&lt;END);
                     78: **** Machine Role ****
                     79: Library server (recommended if first-time installation of LON-CAPA):
                     80:    Servers that are repositories of authoritative educational resources.
                     81:    These servers also provide the construction space by which instructors
                     82:    assemble their classroom online material.
                     83: Access server:
                     84:    Servers that load-balance high-traffic delivery of educational resources
                     85:    over the world-wide web.
1.4       harris41   86: 1) Will this be a library server? (recommended if this is your first install)
1.3       harris41   87: 2) Or, will this be an access server?
                     88: END
1.4       harris41   89: my $flag=0;
                     90: my $r='';
                     91: my $lonRole;
                     92: while (!$flag) {
                     93:   print "ENTER A CHOICE OF 1 or 2:\n";
                     94:   my $choice=&lt;&gt;;
                     95:   chomp($choice);
                     96:   if ($choice==1) {
                     97:     open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
                     98:     print(OUT 'lonRole'."\t".'library'."\n");
                     99:     close(OUT);
                    100:     $lonRole='library';
                    101:     $r='l';
                    102:     $flag=1;
                    103:   }
                    104:   elsif ($choice==2) {
                    105:     open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
                    106:     print(OUT 'lonRole'."\t".'access'."\n");
                    107:     close(OUT);
                    108:     $lonRole='access';
                    109:     $r='a';
                    110:     $flag=2;
                    111:   }
                    112:   else {
                    113: 
                    114:   }
                    115: }
1.3       harris41  116: 
                    117: # need to recommend a machine ID name (ipdomain.l.somenumber)
1.4       harris41  118: my $hostname=`hostname`; chomp($hostname);
                    119: my $ipdomain='';
                    120: if ($hostname=~/([^\.]*)\.([^\.]*)$/) {
                    121:   $ipdomain=$1;
                    122: }
1.1       harris41  123: 
                    124:   print(&lt;&lt;END);
                    125: 
1.8       harris41  126: **** Domain ****
                    127: [this does NOT need to correspond to internet address domains,
                    128:  examples might be "msu" or "bionet" or "vermontcc"]
1.1       harris41  129: END
1.8       harris41  130: 
                    131: # get domain name
1.1       harris41  132: # accept if valid, if not valid, tell user and repeat
1.4       harris41  133: $flag=0;
1.8       harris41  134: my $lonDefDomain;
1.4       harris41  135: while (!$flag) {
                    136: if ($ipdomain) {
                    137: print(&lt;&lt;END);
1.8       harris41  138: ENTER LONCAPA DOMAIN [$ipdomain]:
1.4       harris41  139: END
                    140: }
                    141: else {
                    142:   print(&lt;&lt;END);
1.8       harris41  143: ENTER LONCAPA DOMAIN:
1.4       harris41  144: END
                    145: }
                    146:   my $choice=&lt;&gt;;
                    147:   chomp($choice);
1.8       harris41  148:   if ($ipdomain and $choice=~/^\s*$/) {
                    149:     $choice=$ipdomain;
1.4       harris41  150:     open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
1.8       harris41  151:     print(OUT 'lonDefDomain'."\t".$choice."\n");
1.4       harris41  152:     close(OUT);
1.8       harris41  153:     $lonDefDomain=$choice;
1.4       harris41  154:     $flag=1;
                    155:   }
                    156:   elsif ($choice!~/\_/ and $choice=~/^\w+$/) {
                    157:     open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
1.8       harris41  158:     print(OUT 'lonDefDomain'."\t".$choice."\n");
1.4       harris41  159:     close(OUT);
1.8       harris41  160:     $lonDefDomain=$choice;
                    161:     $r='l';
1.4       harris41  162:     $flag=1;
                    163:   }
                    164:   else {
                    165:     print "Invalid input (only alphanumeric characters supported).\n";
                    166:   }
                    167: }
1.1       harris41  168: 
1.8       harris41  169: my $lonHostID;
                    170: if ($lonDefDomain) {
                    171:   $lonHostID=$lonDefDomain.$r.int(1+rand(9)); # should be probably also detect
                    172:                                               # against the hosts.tab
                    173: }
                    174: 
1.1       harris41  175:   print(&lt;&lt;END);
                    176: 
1.8       harris41  177: **** Machine ID Name ****
                    178: [this does NOT need to correspond to internet address names;
                    179:  this name MUST be unique to the whole LON-CAPA network;
                    180:  we recommend that you use a name based off of your institution;
                    181:  good examples: "msul1" or "bionetl1";
                    182:  bad examples: "loncapabox" or "studentsinside"]
1.1       harris41  183: END
1.8       harris41  184: # get machine name
1.1       harris41  185: # accept if valid, if not valid, tell user and repeat
1.4       harris41  186: $flag=0;
                    187: while (!$flag) {
                    188: if ($ipdomain) {
                    189: print(&lt;&lt;END);
1.8       harris41  190: ENTER LONCAPA MACHINE ID [$lonHostID]:
1.4       harris41  191: END
                    192: }
                    193: else {
                    194:   print(&lt;&lt;END);
1.8       harris41  195: ENTER LONCAPA MACHINE ID:
1.4       harris41  196: END
                    197: }
                    198:   my $choice=&lt;&gt;;
                    199:   chomp($choice);
1.8       harris41  200:   if ($lonHostID and $choice=~/^\s*$/) {
                    201:     $choice=$lonHostID;
1.4       harris41  202:     open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
1.8       harris41  203:     print(OUT 'lonHostID'."\t".$choice."\n");
1.4       harris41  204:     close(OUT);
1.8       harris41  205:     $lonHostID=$choice;
1.4       harris41  206:     $flag=1;
                    207:   }
                    208:   elsif ($choice!~/\_/ and $choice=~/^\w+$/) {
                    209:     open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
1.8       harris41  210:     print(OUT 'lonHostID'."\t".$choice."\n");
1.4       harris41  211:     close(OUT);
1.8       harris41  212:     $lonHostID=$choice;
1.4       harris41  213:     $flag=1;
                    214:   }
                    215:   else {
                    216:     print "Invalid input (only alphanumeric characters supported).\n";
                    217:   }
                    218: }
1.1       harris41  219: 
1.4       harris41  220: # get e-mail address
                    221: # accept if valid, if not valid, tell user and repeat
                    222: $flag=0;
1.9       harris41  223: my $lonAdmEMail;
1.4       harris41  224: while (!$flag) {
1.1       harris41  225:   print(&lt;&lt;END);
                    226: 
                    227: **** System Administrator's E-mail ****
                    228: E-mail address of the person who will manage this machine
1.4       harris41  229: [should be in the form somebody\@somewhere]
1.1       harris41  230: ENTER E-MAIL ADDRESS:
                    231: END
                    232: 
1.4       harris41  233:   my $choice=&lt;&gt;;
                    234:   chomp($choice);
                    235:   if ($choice=~/\@/) {
                    236:     open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
1.9       harris41  237:     print(OUT 'lonAdmEMail'."\t".$choice."\n");
1.4       harris41  238:     close(OUT);
1.9       harris41  239:     $lonAdmEMail=$choice;
1.4       harris41  240:     $flag=1;
                    241:   }
                    242:   else {
                    243:     print "Invalid input (this needs to look like an e-mail address!).\n";
                    244:   }
                    245: }
                    246: 
1.1       harris41  247: # update loncapa.conf
1.7       harris41  248: my $confdir='/etc/httpd/conf/';
                    249: #my $confdir='';
1.5       harris41  250: my $filename='loncapa.conf';
                    251: my %perlvar;
                    252:     if (-e "$confdir$filename") {
                    253: 	open(CONFIG,'&lt;'.$confdir.$filename) or die("Can't read $confdir$filename");
                    254: 	while (my $configline=&lt;CONFIG&gt;) {
                    255: 	    if ($configline =~ /^[^\#]*PerlSetVar/) {
                    256: 		my ($unused,$varname,$varvalue)=split(/\s+/,$configline);
                    257: 		chomp($varvalue);
1.12      harris41  258: 		$perlvar{$varname}=$varvalue if $varvalue!~/^\{\[\[\[\[/;
1.5       harris41  259: 	    }
                    260: 	}
                    261: 	close(CONFIG);
                    262:     }
                    263:     $perlvar{'lonHostID'}=$lonHostID;
                    264:     $perlvar{'lonDefDomain'}=$lonDefDomain;
1.9       harris41  265:     $perlvar{'lonAdmEMail'}=$lonAdmEMail;
1.5       harris41  266:     $perlvar{'lonRole'}=$lonRole;
1.16    ! harris41  267:     unless ($perlvar{'lonLoadLim'} and $perlvar{'lonLoadLim'}!~/\{\[\[\[\[/) {
1.5       harris41  268:        $perlvar{'lonLoadLim'}='2.00';
                    269:     }
1.16    ! harris41  270:     unless ($perlvar{'lonExpire'} and $perlvar{'lonExpire'}!~/\{\[\[\[\[/) {
1.5       harris41  271:        $perlvar{'lonExpire'}='86400';
                    272:     }
1.16    ! harris41  273:     unless ($perlvar{'lonReceipt'} and $perlvar{'lonReceipt'}!~/\{\[\[\[\[/) {
1.5       harris41  274:        my $lonReceipt='';
1.11      harris41  275:        srand(time ^ $$ ^ unpack "%L*", `ps axww | gzip`);
1.5       harris41  276:        my @alnum=(0..9,a..z);
                    277:        foreach my $i (1..20) {
                    278: 	 $lonReceipt.=$alnum[int(rand(36))];
                    279:        }
                    280:        $perlvar{'lonReceipt'}=$lonReceipt;
                    281:     }
                    282:     open(OUT,"&gt;$confdir$filename") or
                    283:       die("Cannot output to $confdir$filename\n");
                    284:     foreach my $key (keys %perlvar) {
                    285:       my $value=$perlvar{$key};
                    286:       print(OUT &lt;&lt;END);
                    287: PerlSetVar     $key      $value
                    288: END
                    289:     }
                    290:     close(OUT);
1.1       harris41  291: }
                    292: </perlscript>
                    293: </file>
                    294: <file>
1.5       harris41  295: <target dist='default'>/</target>
1.1       harris41  296: <perlscript mode='fg'>
                    297: # read values from loncapa.conf
1.7       harris41  298: my $confdir='/etc/httpd/conf/';
1.5       harris41  299: my $filename='loncapa.conf';
                    300: my %perlvar;
                    301:     if (-e "$confdir$filename") {
                    302: 	open(CONFIG,'&lt;'.$confdir.$filename) or 
                    303:           die("Can't read $confdir$filename");
                    304: 	while (my $configline=&lt;CONFIG&gt;) {
                    305: 	    if ($configline =~ /^[^\#]*PerlSetVar/) {
                    306: 		my ($unused,$varname,$varvalue)=split(/\s+/,$configline);
                    307: 		chomp($varvalue);
                    308: 		$perlvar{$varname}=$varvalue;
                    309: 	    }
                    310: 	}
                    311: 	close(CONFIG);
                    312:     }
1.16    ! harris41  313:     unless ($perlvar{'lonLoadLim'} and $perlvar{'lonLoadLim'}!~/\{\[\[\[\[/) {
        !           314:        $perlvar{'lonLoadLim'}='2.00';
        !           315:     }
        !           316:     unless ($perlvar{'lonExpire'} and $perlvar{'lonExpire'}!~/\{\[\[\[\[/) {
        !           317:        $perlvar{'lonExpire'}='86400';
        !           318:     }
        !           319:     unless ($perlvar{'lonReceipt'} and $perlvar{'lonReceipt'}!~/\{\[\[\[\[/) {
        !           320:        my $lonReceipt='';
        !           321:        srand(time ^ $$ ^ unpack "%L*", `ps axww | gzip`);
        !           322:        my @alnum=(0..9,a..z);
        !           323:        foreach my $i (1..20) {
        !           324: 	 $lonReceipt.=$alnum[int(rand(36))];
        !           325:        }
        !           326:        $perlvar{'lonReceipt'}=$lonReceipt;
        !           327:     }
1.7       harris41  328: my %perlvarstatic;
                    329:     if (-e "${confdir}loncapa_apache.conf") {
                    330: 	open(CONFIG,'&lt;'.$confdir.'loncapa_apache.conf') or 
                    331:           die("Can't read ${confdir}loncapa_apache.conf");
                    332: 	while (my $configline=&lt;CONFIG&gt;) {
                    333: 	    if ($configline =~ /^[^\#]*PerlSetVar/) {
                    334: 		my ($unused,$varname,$varvalue)=split(/\s+/,$configline);
                    335: 		chomp($varvalue);
                    336: 		$perlvarstatic{$varname}=$varvalue;
                    337: 	    }
                    338: 	}
                    339: 	close(CONFIG);
                    340:     }
1.6       harris41  341: # implement editing logic below, interactively
                    342: # update loncapa.conf until 7 is entered
                    343: 
                    344: $flag=0;
                    345: while (!$flag) {
1.1       harris41  346:   print(&lt;&lt;END);
                    347: 
                    348: ===============================================================================
                    349: This is now the current configuration of your machine.
1.8       harris41  350: 1) Domain Name: $perlvar{'lonDefDomain'}
                    351: 2) Machine Name: $perlvar{'lonHostID'}
1.9       harris41  352: 3) System Administrator's E-mail Address: $perlvar{'lonAdmEMail'}
1.5       harris41  353: 4) Role: $perlvar{'lonRole'}
                    354: 5) Cache Expiration Time: $perlvar{'lonExpire'}
                    355: 6) Server Load: $perlvar{'lonLoadLim'}
1.1       harris41  356: 7) Everything is correct up above
1.6       harris41  357: END
                    358:   print(&lt;&lt;END);
1.1       harris41  359: ENTER A CHOICE OF 1-6 TO CHANGE, otherwise ENTER 7:
                    360: END
1.5       harris41  361: my $choice=&lt;&gt;;
                    362: chomp($choice);
1.6       harris41  363:   if ($choice==1) {
                    364:   print(&lt;&lt;END);
1.16    ! harris41  365: 1) Domain Name: $perlvar{'lonDefDomain'}
1.6       harris41  366: ENTER NEW VALUE:
                    367: END
                    368:     my $choice2=&lt;&gt;;
                    369:     chomp($choice2);
1.8       harris41  370:     $perlvar{'lonDefDomain'}=$choice2;
1.6       harris41  371:   }
                    372:   elsif ($choice==2) {
                    373:   print(&lt;&lt;END);
1.16    ! harris41  374: 2) Machine Name: $perlvar{'lonHostID'}
1.6       harris41  375: ENTER NEW VALUE:
                    376: END
                    377:     my $choice2=&lt;&gt;;
                    378:     chomp($choice2);
1.8       harris41  379:     $perlvar{'lonHostID'}=$choice2;
1.6       harris41  380:   }
                    381:   elsif ($choice==3) {
                    382:   print(&lt;&lt;END);
1.9       harris41  383: 3) System Administrator's E-mail Address: $perlvar{'lonAdmEMail'}
1.6       harris41  384: ENTER NEW VALUE:
                    385: END
                    386:     my $choice2=&lt;&gt;;
                    387:     chomp($choice2);
1.9       harris41  388:     $perlvar{'lonAdmEMail'}=$choice2;
1.6       harris41  389:   }
                    390:   elsif ($choice==4) {
                    391:   print(&lt;&lt;END);
                    392: 4) Role: $perlvar{'lonRole'}
                    393: ENTER NEW VALUE:
                    394: END
                    395:     my $choice2=&lt;&gt;;
                    396:     chomp($choice2);
                    397:     $perlvar{'lonRole'}=$choice2;
                    398:   }
                    399:   elsif ($choice==5) {
                    400:   print(&lt;&lt;END);
                    401: 5) Cache Expiration Time: $perlvar{'lonExpire'}
                    402: ENTER NEW VALUE:
                    403: END
                    404:     my $choice2=&lt;&gt;;
                    405:     chomp($choice2);
                    406:     $perlvar{'lonExpire'}=$choice2;
                    407:   }
                    408:   elsif ($choice==6) {
                    409:   print(&lt;&lt;END);
                    410: 6) Server Load: $perlvar{'lonLoadLim'}
                    411: ENTER NEW VALUE:
                    412: END
                    413:     my $choice2=&lt;&gt;;
                    414:     chomp($choice2);
                    415:     $perlvar{'lonLoadLim'}=$choice2;
                    416:   }
                    417:   elsif ($choice==7) {
                    418:     $flag=1;
                    419:   }
                    420:   else {
1.1       harris41  421: 
1.6       harris41  422:   }
                    423: }
1.7       harris41  424:     open(OUT,"&gt;$confdir$filename") or
                    425:       die("Cannot output to $confdir$filename\n");
                    426:     foreach my $key (keys %perlvar) {
                    427:       my $value=$perlvar{$key};
1.8       harris41  428:       print(OUT &lt;&lt;END) unless $perlvarstatic{$key};
1.7       harris41  429: PerlSetVar     $key      $value
                    430: END
                    431:     }
                    432:     close(OUT);
1.1       harris41  433: </perlscript>
                    434: </file>
                    435: <file>
                    436: <target dist='default'>loncom/hosts.tab</target>
                    437: <perlscript mode='fg'>
                    438: unless (-l "<TARGET />") {
                    439:   print(&lt;&lt;END);
                    440: 
                    441: ===============================================================================
                    442: What hosts.tab would you like to have installed?
                    443: (hosts.tab is a listing of all other internet machines
                    444: that a server system considers to be valid server systems
                    445: on the LON-CAPA network)
                    446: 
                    447: 1) PRODUCTION - you want to deliver courses today or sometime very soon
                    448:                 on this machine
1.5       harris41  449: 2) STAND-ALONE - you want this machine to run in 'stand-alone' mode and
                    450:                  not be connected to other LON-CAPA machines for now
                    451: 3) DEVELOPMENT - you want to play with or explore LON-CAPA
1.6       harris41  452: 4) PRESERVE the existing hosts.tab (/home/httpd/lonTabs/hosts.tab)
1.1       harris41  453: 
                    454: END
                    455: # Option number 26 will install rawhide_hosts.tab, but
                    456: # the typical user does not want to be part of an intensive
                    457: # machine test cluster.
                    458: 
                    459: # get input
                    460: # if valid then process, otherwise loop
1.6       harris41  461: my $hostname=`hostname`;chomp($hostname);
                    462: my $hostaddress=`hostname -i $hostname`;chomp($hostaddress);
                    463: $flag=0;
                    464: while (!$flag) {
                    465:   print "ENTER 1, 2, 3, or 4:\n";
                    466:   my $choice=&lt;&gt;;
                    467:   chomp($choice);
1.15      harris41  468:   $line2insert=&lt;&lt;END;
1.13      harris41  469: $perlvar{'lonHostID'}:$perlvar{'lonDefDomain'}:$perlvar{'lonRole'}:$hostname:$hostaddress
                    470: END
1.15      harris41  471:   $date=`date -I`; chomp($date);
                    472:   $lonHostID=$perlvar{'lonHostID'};
                    473:   $lonHostID=~s/\W//g;
                    474:   $lineexistflag=0;
                    475:   $hostidexistflag=0;
1.6       harris41  476:   if ($choice==1) {
1.15      harris41  477:     $lonCluster='production'; $flag=1;
                    478:   }
                    479:   elsif ($choice==2) {
                    480:     $lonCluster='standalone'; $flag=1;
                    481:     open(OUT,'&gt;../'.$lonCluster.'_hosts.tab') or
                    482:       die('file generation error');
                    483:       print(OUT $line2insert);
                    484:     close(OUT);
                    485:   }
                    486:   elsif ($choice==3) {
                    487:     $lonCluster='development'; $flag=1;
                    488:   }
                    489:   elsif ($choice==4) {
                    490:     $lonCluster='existing'; $flag=1;
                    491:     if (-e '/home/httpd/lonTabs/hosts.tab') {
                    492:       `cp /home/httpd/lonTabs/hosts.tab ../existing_hosts.tab`;
                    493:     }
                    494:     else {
                    495:       print &lt;&lt;END;
                    496: There is no existing /home/httpd/lonTabs/hosts.tab
                    497: END
                    498:       die('');
                    499:     }
                    500:   }
                    501:   elsif ($choice==26) {
                    502:     $lonCluster='rawhide'; $flag=1;
                    503:   }
                    504:   if ($flag==1) {
1.6       harris41  505:     `rm -f ../hosts.tab`;
1.15      harris41  506:     open(IN,'&lt;../'.$lonCluster.'_hosts.tab');
1.13      harris41  507:     while(&lt;IN&gt;) {
                    508:       if (/^$line2insert$/) {
                    509:         $lineexistflag=1;
                    510:       }
1.15      harris41  511:       if (/^$lonHostID\:/) {
1.13      harris41  512:         $hostidexistflag=1;
                    513:       }
                    514:     }
                    515:     close(IN);
                    516:     if ($hostidexistflag and !$lineexistflag) {
                    517:       print &lt;&lt;END;
                    518: WARNING: $lonHostID already exists inside
1.15      harris41  519: loncapa/loncom/${lonCluster}_hosts.tab.  The entry inside
                    520: ${lonCluster}_hosts.tab does not match your settings.
                    521: The entry inside ${lonCluster}_hosts.tab is being replaced
1.13      harris41  522: with your new values.
                    523: END
1.15      harris41  524:       `grep -v "$lonHostID:" ../${lonCluster}_hosts.tab &gt; ../new_${lonCluster}_hosts.tab`;
                    525:        open(OUT,'&gt;&gt;../new_'.$lonCluster.'_hosts.tab') or
                    526:          die("cannot open loncom/${lonCluster}_hosts.tab for output\n");
1.14      harris41  527:          print(OUT $line2insert);
1.13      harris41  528:        close(OUT);
1.15      harris41  529:       `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
1.13      harris41  530:       # email appropriate message
1.15      harris41  531:       `echo "REPLACE:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "REPLACE:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
1.13      harris41  532:     }
                    533:     elsif ($hostidexistflag and $lineexistflag) {
1.15      harris41  534:       print &lt;&lt;END;
                    535: Entry exists in ${lonCluster}_hosts.tab.
                    536: END
                    537:       `ln -s ${lonCluster}_hosts.tab ../hosts.tab`;
                    538:       # email appropriate message
                    539:       `echo "STABLEUPDATE:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "STABLEUPDATE:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
1.13      harris41  540:     }
1.15      harris41  541:     elsif (!$hostidexistflag and !$lineexistflag) {
                    542:       print &lt;&lt;END;
                    543: New entry for $lonCluster.
1.6       harris41  544: END
1.15      harris41  545:       `cat ../${lonCluster}_hosts.tab &gt; ../new_${lonCluster}_hosts.tab`;
                    546:        open(OUT,'&gt;../new_'.$lonCluster.'_hosts.tab') or
                    547:          die("cannot open loncom/${lonCluster}_hosts.tab for output\n");
                    548:          print(OUT $line2insert);
                    549:        close(OUT);
                    550:       `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
                    551:       # email appropriate message
                    552:       `echo "INSERT:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "INSERT:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
1.6       harris41  553:     }
                    554:   }
                    555: }
1.1       harris41  556: 
                    557: }
                    558: </perlscript>
                    559: </file>
                    560: </files>
                    561: </piml>

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>