Annotation of doc/loncapafiles/updatequery.piml, revision 1.45
1.2 harris41 1: <!-- updatequery.piml -->
1.1 harris41 2:
1.45 ! www 3: <!-- $Id: updatequery.piml,v 1.44 2005/12/10 00:28:14 albertel Exp $ -->
1.1 harris41 4:
5: <!--
6:
7: This file is part of the LearningOnline Network with CAPA (LON-CAPA).
8:
9: LON-CAPA is free software; you can redistribute it and/or modify
10: it under the terms of the GNU General Public License as published by
11: the Free Software Foundation; either version 2 of the License, or
12: (at your option) any later version.
13:
14: LON-CAPA is distributed in the hope that it will be useful,
15: but WITHOUT ANY WARRANTY; without even the implied warranty of
16: MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17: GNU General Public License for more details.
18:
19: You should have received a copy of the GNU General Public License
20: along with LON-CAPA; if not, write to the Free Software
21: Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22:
23: /home/httpd/html/adm/gpl.txt
24:
25: http://www.lon-capa.org/
26:
27: -->
28:
29: <piml>
30: <targetroot>/</targetroot>
31: <files>
32: <file>
1.4 harris41 33: <target dist='default'>/</target>
1.1 harris41 34: <perlscript mode='fg'>
1.4 harris41 35: $|=1;
1.1 harris41 36: print(<<END);
37:
38:
39: *********************************************
40: *********************************************
41: **** ****
42: **** LON-CAPA SYSTEM INFORMATION REQUEST ****
43: **** ****
44: **** Please respond to the choices below ****
45: **** ****
46: *********************************************
47: *********************************************
48:
49: END
1.4 harris41 50: sleep(3);
1.1 harris41 51: </perlscript>
52: </file>
53: <file>
1.22 albertel 54: <target dist='default'>loncom/hosts.tab</target>
55: <perlscript mode='fg'>
56: unless (-l "<TARGET />") {
57: print(<<END);
58:
59: ===============================================================================
1.30 www 60: Which cluster option would you like to have installed?
61: IMPORTANT: to take advantage of the cluster options 1) and 3),
62: you must contact lon-capa\@lon-capa.org.
63:
64: 1) PRODUCTION - you want to eventually connect this machine to the
65: LON-CAPA content sharing network. This setting is for
66: schools, colleges, and universities, that currently
67: are running - or in the future will run - courses
1.22 albertel 68: 2) STAND-ALONE - you want this machine to run in 'stand-alone' mode and
69: not be connected to other LON-CAPA machines for now
1.30 www 70: 3) DEVELOPMENT - you want to do software (not content!) development with
71: this workstation and eventually link it with the
72: workstations of other LON-CAPA software developers.
1.40 albertel 73: 4) RUNNING YOUR OWN CLUSTER - this machine is not in the standard LON-CAPA
74: clusters and won't be in the future and you want the existing
75: hosts.tab and domain.tab files to be left alone.
76: (This choice is unlikely what you want to select.)
1.22 albertel 77: END
78: # Option number 26 will install rawhide_hosts.tab, but
79: # the typical user does not want to be part of an intensive
80: # machine test cluster.
81:
82: # get input
83: # if valid then process, otherwise loop
84: $flag=0;
85: while (!$flag) {
86: print "ENTER 1, 2, 3, or 4:\n";
87: my $choice=<>;
88: chomp($choice);
89: if ($choice==1) {
90: $lonCluster='production'; $flag=1;
91: }
92: elsif ($choice==2) {
93: $lonCluster='standalone'; $flag=1;
94: }
95: elsif ($choice==3) {
96: $lonCluster='development'; $flag=1;
97: }
98: elsif ($choice==4) {
99: $lonCluster='existing'; $flag=1;
100: if (-e '/home/httpd/lonTabs/hosts.tab') {
101: `cp /home/httpd/lonTabs/hosts.tab ../existing_hosts.tab`;
102: }
103: else {
104: print <<END;
105: There is no existing /home/httpd/lonTabs/hosts.tab
106: END
107: die('');
108: }
1.27 albertel 109: if (-e '/home/httpd/lonTabs/domain.tab') {
110: `cp /home/httpd/lonTabs/domain.tab ../existing_domain.tab`;
111: }
112: else {
113: print <<END;
114: There is no existing /home/httpd/lonTabs/domain.tab
115: END
116: die('');
117: }
1.22 albertel 118: }
119: elsif ($choice==26) {
120: $lonCluster='rawhide'; $flag=1;
121: }
122: }
123: }
124: </perlscript>
125: </file>
126: <file>
1.10 harris41 127: <target dist='default'>/home/httpd/lonTabs/hosts.tab</target>
1.1 harris41 128: <perlscript mode='fg'>
1.4 harris41 129: $|=1;
1.20 albertel 130: my $domainDescription;
1.29 albertel 131: my $domainTabExtras;
1.43 raeburn 132: my $primaryLibServer;
133: my @libservers = ();
1.1 harris41 134: unless (-e "<TARGET />") {
135: print(<<END);
136: WELCOME TO LON-CAPA!
137:
138: If you have questions, please visit http://install.lon-capa.org
1.32 raeburn 139: or contact helpdesk\@lon-capa.org.
1.1 harris41 140:
141: ===============================================================================
1.4 harris41 142: The following 4 values are needed to configure LON-CAPA:
143: * Machine Role
1.8 harris41 144: * LON-CAPA Domain Name
145: * LON-CAPA Machine ID Name, and
1.1 harris41 146: * System Administration E-mail Address.
1.32 raeburn 147: ===============================================================================
148:
149: In addition, a Support E-mail Address can also be included. If
150: an address is included then one of the options in the LON-CAPA
151: help menu will be a link to a form that a user will complete to
152: request LON-CAPA help.
153:
1.1 harris41 154: END
1.3 harris41 155:
1.4 harris41 156: open(OUT,'>/tmp/loncapa_updatequery.out');
157: close(OUT);
158:
1.3 harris41 159: # query for Machine Role
160: print(<<END);
161: **** Machine Role ****
162: Library server (recommended if first-time installation of LON-CAPA):
163: Servers that are repositories of authoritative educational resources.
164: These servers also provide the construction space by which instructors
165: assemble their classroom online material.
166: Access server:
167: Servers that load-balance high-traffic delivery of educational resources
168: over the world-wide web.
1.4 harris41 169: 1) Will this be a library server? (recommended if this is your first install)
1.3 harris41 170: 2) Or, will this be an access server?
171: END
1.4 harris41 172: my $flag=0;
173: my $r='';
174: my $lonRole;
175: while (!$flag) {
176: print "ENTER A CHOICE OF 1 or 2:\n";
177: my $choice=<>;
178: chomp($choice);
179: if ($choice==1) {
180: open(OUT,'>>/tmp/loncapa_updatequery.out');
181: print(OUT 'lonRole'."\t".'library'."\n");
182: close(OUT);
183: $lonRole='library';
184: $r='l';
185: $flag=1;
186: }
187: elsif ($choice==2) {
188: open(OUT,'>>/tmp/loncapa_updatequery.out');
189: print(OUT 'lonRole'."\t".'access'."\n");
190: close(OUT);
191: $lonRole='access';
192: $r='a';
193: $flag=2;
194: }
195: else {
196:
197: }
198: }
1.3 harris41 199:
200: # need to recommend a machine ID name (ipdomain.l.somenumber)
1.36 albertel 201: my $hostname=`hostname -f`; chomp($hostname);
1.4 harris41 202: my $ipdomain='';
203: if ($hostname=~/([^\.]*)\.([^\.]*)$/) {
204: $ipdomain=$1;
205: }
1.1 harris41 206:
207: print(<<END);
208:
1.8 harris41 209: **** Domain ****
1.45 ! www 210: [This does NOT need to correspond to internet address domains.
! 211: Please make this name short AND descriptive of your organization.
! 212: Domain names are close to impossible to change later!!!
! 213: Good examples might be "msu" or "bionet" or "vermontcc".
! 214: Bad examples are "physics" (too general)
1.37 www 215: or "michiganstateuniversity" (too long)
216: or "msuedu" (internet domain, just make it "msu")
1.45 ! www 217: or "msuphysics" (only if there is a good reason to limit to department
! 218: - we don't know of one)
1.37 www 219: or "mydomain" (what is that?)
1.45 ! www 220: Avoid multiple domains at the same institution, even if it means that you
! 221: have to actually work together with your colleagues. You can still run
! 222: multiple library servers within the same domain.
! 223: If this domain is eventually going to be part of the main production
! 224: cluster, you MUST contact the LON-CAPA group at MSU (loncapa@loncapa.org)
! 225: to have a domain name assigned, and then use it exactly as given. This is
! 226: also true for test installs that might eventually turn into production setups.
! 227: Stop now if you didn't do so.]
1.1 harris41 228: END
1.8 harris41 229:
230: # get domain name
1.1 harris41 231: # accept if valid, if not valid, tell user and repeat
1.4 harris41 232: $flag=0;
1.8 harris41 233: my $lonDefDomain;
1.4 harris41 234: while (!$flag) {
235: if ($ipdomain) {
236: print(<<END);
1.8 harris41 237: ENTER LONCAPA DOMAIN [$ipdomain]:
1.4 harris41 238: END
239: }
240: else {
241: print(<<END);
1.8 harris41 242: ENTER LONCAPA DOMAIN:
1.4 harris41 243: END
244: }
245: my $choice=<>;
246: chomp($choice);
1.18 harris41 247: my $bad_domain_flag=0;
1.41 albertel 248: my @bad_domain_names=('res','raw','userfiles','priv','adm','uploaded',
249: 'editupload');
1.18 harris41 250: foreach my $bad (@bad_domain_names) {
251: $bad_domain_flag=1 if $choice eq $bad;
252: }
1.37 www 253: if ($choice=~/capa/i) {
254: $bad_domain_flag=1;
255: }
1.8 harris41 256: if ($ipdomain and $choice=~/^\s*$/) {
257: $choice=$ipdomain;
1.4 harris41 258: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.8 harris41 259: print(OUT 'lonDefDomain'."\t".$choice."\n");
1.4 harris41 260: close(OUT);
1.8 harris41 261: $lonDefDomain=$choice;
1.4 harris41 262: $flag=1;
1.37 www 263: } elsif (length($choice)>12) {
264: print "Name too long\n";
265: } elsif (length($choice)<2) {
266: print "Name too short\n";
1.38 www 267: } elsif ($bad_domain_flag) {
268: print "Invalid input ('$choice' conflicts with LON-CAPA namespace).\n";
269: print "Please try something different than '$choice'\n";
1.37 www 270: } elsif ($choice!~/\_/ and $choice=~/^\w+$/) {
1.4 harris41 271: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.8 harris41 272: print(OUT 'lonDefDomain'."\t".$choice."\n");
1.4 harris41 273: close(OUT);
1.8 harris41 274: $lonDefDomain=$choice;
275: $r='l';
1.4 harris41 276: $flag=1;
1.37 www 277: } else {
1.4 harris41 278: print "Invalid input (only alphanumeric characters supported).\n";
279: }
280: }
1.1 harris41 281:
1.20 albertel 282:
283: # get domain description
284: # accept if valid, if not valid, tell user and repeat
285: $flag=0;
286:
287: while (!$flag) {
288: print(<<END);
289:
290: **** Domain Description ****
291: String describing the domain, to be shown to users.
292: [Example, msu is Michigan State University]
293: ENTER DOMAIN DESCRIPTION:
294: END
295:
296: my $choice=<>;
297: chomp($choice);
298: if ($choice!~/:/) {
299: open(OUT,'>>/tmp/loncapa_updatequery.out');
300: print(OUT 'domainDescription'."\t".$choice."\n");
301: close(OUT);
302: $domainDescription=$choice;
303: $flag=1;
304: }
305: else {
306: print "Invalid input (no ':' allowed).\n";
307: }
308: }
309:
1.8 harris41 310: my $lonHostID;
311: if ($lonDefDomain) {
312: $lonHostID=$lonDefDomain.$r.int(1+rand(9)); # should be probably also detect
313: # against the hosts.tab
314: }
315:
1.1 harris41 316: print(<<END);
317:
1.8 harris41 318: **** Machine ID Name ****
1.45 ! www 319: [This does NOT need to correspond to internet address names;
1.8 harris41 320: this name MUST be unique to the whole LON-CAPA network;
1.45 ! www 321: we recommend that you use a name based off of your institution.
! 322: Good examples: "msul1" or "bioneta2".
! 323: Bad examples: "loncapabox" or "studentsinside".
1.37 www 324: Note that machine names are very hard to change later.]
1.1 harris41 325: END
1.8 harris41 326: # get machine name
1.1 harris41 327: # accept if valid, if not valid, tell user and repeat
1.4 harris41 328: $flag=0;
329: while (!$flag) {
330: if ($ipdomain) {
331: print(<<END);
1.8 harris41 332: ENTER LONCAPA MACHINE ID [$lonHostID]:
1.4 harris41 333: END
334: }
335: else {
336: print(<<END);
1.8 harris41 337: ENTER LONCAPA MACHINE ID:
1.4 harris41 338: END
339: }
340: my $choice=<>;
341: chomp($choice);
1.37 www 342: if ($choice=~/capa/i) {
343: print "Invalid input (names containing 'capa' are reserved).\n";
344: } elsif ($lonHostID and $choice=~/^\s*$/) {
1.8 harris41 345: $choice=$lonHostID;
1.4 harris41 346: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.8 harris41 347: print(OUT 'lonHostID'."\t".$choice."\n");
1.4 harris41 348: close(OUT);
1.8 harris41 349: $lonHostID=$choice;
1.4 harris41 350: $flag=1;
1.37 www 351: } elsif (length($choice)>15) {
352: print "Name too long\n";
353: } elsif (length($choice)<4) {
354: print "Name too short\n";
355: } elsif ($choice!~/\_/ and $choice=~/^\w+$/) {
1.4 harris41 356: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.8 harris41 357: print(OUT 'lonHostID'."\t".$choice."\n");
1.4 harris41 358: close(OUT);
1.8 harris41 359: $lonHostID=$choice;
1.4 harris41 360: $flag=1;
1.37 www 361: } else {
1.4 harris41 362: print "Invalid input (only alphanumeric characters supported).\n";
363: }
364: }
1.1 harris41 365:
1.43 raeburn 366: # get primary library server in domain
367: if ($lonRole eq 'library') {
368: if (!grep/^\Q$lonHostID\E$/,@libservers) {
369: push(@libservers,$lonHostID);
370: }
371: if (@libservers == 1) {
372: $primaryLibServer = $libservers[0];
373: }
374: }
375: while (!$flag) {
376: print(<<END);
377: **** Domain's Primary Library Server ID ****
378: This should be the LON-CAPA machine ID of a library server in your
379: domain. If you only have a single library server in your domain, then
380: the Primary Library server ID will be the machine ID of that server.
381: This server will be where domain data which are not associated with any
382: specific home library server will be stored (e.g., e-mail broadcast by
383: administrators to users in the domain).
384: END
385: if (defined($primaryLibServer)) {
386: print(<<END);
387: ENTER DOMAIN'S PRIMARY LIBRARY SERVER ID [$primaryLibServer]:
388: END
389: } elsif (@libservers > 0) {
390: print(<<END);
391: ENTER DOMAIN'S PRIMARY LIBRARY SERVER ID [$libservers[0]]
392: END
393: } else {
394: print (<<END);
395: No library servers could be identified for this domain. If you have already installed LON-CAPA on a different server (designated as a library server) in this domain, please enter the LONCAPA MACHINE ID of that server. If not, you will need to install a LON-CAPA library server. Enter the MACHINE ID of the server you plan to designate as a library server.
396: END
397: }
398:
399: my $choice=<>;
400: chomp($choice);
401: if ($primaryLibServer and $choice=~/^\s*$/) {
402: $choice=$primaryLibServer;
403: open(OUT,'>>/tmp/loncapa_updatequery.out');
404: print(OUT 'primaryLibServer'."\t".$choice."\n");
405: close(OUT);
406: $flag=1;
407: } elsif (length($choice)>15) {
408: print "Name too long\n";
409: } elsif (length($choice)<4) {
410: print "Name too short\n";
411: } elsif ($choice!~/\_/ and $choice=~/^\w+$/) {
412: open(OUT,'>>/tmp/loncapa_updatequery.out');
413: print(OUT 'primaryLibServer'."\t".$choice."\n");
414: close(OUT);
415: $primaryLibServer=$choice;
416: $flag=1;
417: } else {
418: print "Invalid input (only alphanumeric characters supported).\n";
419: }
420: }
421:
422:
1.32 raeburn 423: # get admin e-mail address
1.4 harris41 424: # accept if valid, if not valid, tell user and repeat
425: $flag=0;
1.9 harris41 426: my $lonAdmEMail;
1.4 harris41 427: while (!$flag) {
1.1 harris41 428: print(<<END);
429:
430: **** System Administrator's E-mail ****
431: E-mail address of the person who will manage this machine
1.4 harris41 432: [should be in the form somebody\@somewhere]
1.32 raeburn 433: ENTER ADMIN E-MAIL ADDRESS:
1.1 harris41 434: END
435:
1.4 harris41 436: my $choice=<>;
437: chomp($choice);
438: if ($choice=~/\@/) {
439: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.9 harris41 440: print(OUT 'lonAdmEMail'."\t".$choice."\n");
1.4 harris41 441: close(OUT);
1.9 harris41 442: $lonAdmEMail=$choice;
1.4 harris41 443: $flag=1;
444: }
445: else {
446: print "Invalid input (this needs to look like an e-mail address!).\n";
447: }
448: }
449:
1.32 raeburn 450:
451: # get support e-mail address
452: # accept if valid, if not valid, tell user and repeat
453: $flag=0;
454: my $lonSupportEMail;
455: while (!$flag) {
456: print(<<END);
457:
458: **** Support E-mail ****
459: E-mail address of the person who will receive
460: help requests from LON-CAPA users who access
461: the system via this server. If the address is left blank,
462: then a help support form will not be displayed
463: as part of the help menu.
464: [should be in the form somebody\@somewhere]
465: ENTER SUPPORT E-MAIL ADDRESS:
466: END
467:
468: my $choice=<>;
469: chomp($choice);
470: $choice =~ s/\s//g;
1.33 albertel 471: if ( ($choice=~/\@/) || $choice eq '') {
1.32 raeburn 472: open(OUT,'>>/tmp/loncapa_updatequery.out');
473: print(OUT 'lonSupportEMail'."\t".$choice."\n");
474: close(OUT);
475: $lonSupportEMail=$choice;
476: $flag=1;
477: }
478: else {
479: print "Invalid input (this either needs to be blank, or look like an e-mail address!).\n";
480: }
481: }
482:
483:
1.1 harris41 484: # update loncapa.conf
1.7 harris41 485: my $confdir='/etc/httpd/conf/';
486: #my $confdir='';
1.5 harris41 487: my $filename='loncapa.conf';
488: my %perlvar;
489: if (-e "$confdir$filename") {
490: open(CONFIG,'<'.$confdir.$filename) or die("Can't read $confdir$filename");
491: while (my $configline=<CONFIG>) {
492: if ($configline =~ /^[^\#]*PerlSetVar/) {
493: my ($unused,$varname,$varvalue)=split(/\s+/,$configline);
494: chomp($varvalue);
1.12 harris41 495: $perlvar{$varname}=$varvalue if $varvalue!~/^\{\[\[\[\[/;
1.5 harris41 496: }
497: }
498: close(CONFIG);
499: }
500: $perlvar{'lonHostID'}=$lonHostID;
501: $perlvar{'lonDefDomain'}=$lonDefDomain;
1.9 harris41 502: $perlvar{'lonAdmEMail'}=$lonAdmEMail;
1.32 raeburn 503: $perlvar{'lonSupportEMail'}=$lonSupportEMail;
1.5 harris41 504: $perlvar{'lonRole'}=$lonRole;
1.16 harris41 505: unless ($perlvar{'lonLoadLim'} and $perlvar{'lonLoadLim'}!~/\{\[\[\[\[/) {
1.5 harris41 506: $perlvar{'lonLoadLim'}='2.00';
507: }
1.25 albertel 508: unless ($perlvar{'lonUserLoadLim'} and $perlvar{'lonUserLoadLim'}!~/\{\[\[\[\[/) {
509: $perlvar{'lonUserLoadLim'}='0';
510: }
1.16 harris41 511: unless ($perlvar{'lonExpire'} and $perlvar{'lonExpire'}!~/\{\[\[\[\[/) {
1.5 harris41 512: $perlvar{'lonExpire'}='86400';
513: }
1.16 harris41 514: unless ($perlvar{'lonReceipt'} and $perlvar{'lonReceipt'}!~/\{\[\[\[\[/) {
1.5 harris41 515: my $lonReceipt='';
1.11 harris41 516: srand(time ^ $$ ^ unpack "%L*", `ps axww | gzip`);
1.5 harris41 517: my @alnum=(0..9,a..z);
518: foreach my $i (1..20) {
519: $lonReceipt.=$alnum[int(rand(36))];
520: }
521: $perlvar{'lonReceipt'}=$lonReceipt;
522: }
523: open(OUT,">$confdir$filename") or
524: die("Cannot output to $confdir$filename\n");
525: foreach my $key (keys %perlvar) {
526: my $value=$perlvar{$key};
527: print(OUT <<END);
528: PerlSetVar $key $value
529: END
530: }
531: close(OUT);
1.1 harris41 532: }
533: </perlscript>
534: </file>
535: <file>
1.5 harris41 536: <target dist='default'>/</target>
1.1 harris41 537: <perlscript mode='fg'>
1.31 albertel 538: sub securesetting {
539: my (%perlvar)=@_;
540: my $securestatus='unknown';
541: my $securenum='';
542: if ( $perlvar{'loncAllowInsecure'}&& $perlvar{'londAllowInsecure'}) {
543: $securestatus='no'; $securenum='4';
544: } elsif ( $perlvar{'loncAllowInsecure'}&& !$perlvar{'londAllowInsecure'}) {
545: $securestatus='lond'; $securenum='3';
546: } elsif (!$perlvar{'loncAllowInsecure'}&& $perlvar{'londAllowInsecure'}) {
547: $securestatus='lonc'; $securenum='2';
548: } elsif (!$perlvar{'loncAllowInsecure'}&& !$perlvar{'londAllowInsecure'}) {
549: $securestatus='yes (lond and lonc)'; $securenum='1';
550: }
551: return ($securestatus,$securenum);
552: }
1.1 harris41 553: # read values from loncapa.conf
1.7 harris41 554: my $confdir='/etc/httpd/conf/';
1.5 harris41 555: my $filename='loncapa.conf';
556: my %perlvar;
1.31 albertel 557: my ($securestatus,$securenum);
1.5 harris41 558: if (-e "$confdir$filename") {
559: open(CONFIG,'<'.$confdir.$filename) or
560: die("Can't read $confdir$filename");
561: while (my $configline=<CONFIG>) {
562: if ($configline =~ /^[^\#]*PerlSetVar/) {
563: my ($unused,$varname,$varvalue)=split(/\s+/,$configline);
564: chomp($varvalue);
565: $perlvar{$varname}=$varvalue;
566: }
567: }
568: close(CONFIG);
569: }
1.16 harris41 570: unless ($perlvar{'lonLoadLim'} and $perlvar{'lonLoadLim'}!~/\{\[\[\[\[/) {
571: $perlvar{'lonLoadLim'}='2.00';
572: }
1.25 albertel 573: unless ($perlvar{'lonUserLoadLim'} and $perlvar{'lonUserLoadLim'}!~/\{\[\[\[\[/) {
574: $perlvar{'lonUserLoadLim'}='0';
575: }
1.16 harris41 576: unless ($perlvar{'lonExpire'} and $perlvar{'lonExpire'}!~/\{\[\[\[\[/) {
577: $perlvar{'lonExpire'}='86400';
578: }
1.31 albertel 579: unless ($perlvar{'londAllowInsecure'} and $perlvar{'londAllowInsecure'}!~/\{\[\[\[\[/) {
580: $perlvar{'londAllowInsecure'}='1';
581: }
582: unless ($perlvar{'loncAllowInsecure'} and $perlvar{'loncAllowInsecure'}!~/\{\[\[\[\[/) {
583: $perlvar{'loncAllowInsecure'}='1';
584: }
585: ($securestatus,$securenum)=&securesetting(%perlvar);
1.16 harris41 586: unless ($perlvar{'lonReceipt'} and $perlvar{'lonReceipt'}!~/\{\[\[\[\[/) {
587: my $lonReceipt='';
588: srand(time ^ $$ ^ unpack "%L*", `ps axww | gzip`);
589: my @alnum=(0..9,a..z);
590: foreach my $i (1..20) {
591: $lonReceipt.=$alnum[int(rand(36))];
592: }
593: $perlvar{'lonReceipt'}=$lonReceipt;
594: }
1.7 harris41 595: my %perlvarstatic;
596: if (-e "${confdir}loncapa_apache.conf") {
597: open(CONFIG,'<'.$confdir.'loncapa_apache.conf') or
598: die("Can't read ${confdir}loncapa_apache.conf");
599: while (my $configline=<CONFIG>) {
600: if ($configline =~ /^[^\#]*PerlSetVar/) {
601: my ($unused,$varname,$varvalue)=split(/\s+/,$configline);
602: chomp($varvalue);
603: $perlvarstatic{$varname}=$varvalue;
604: }
605: }
606: close(CONFIG);
607: }
1.23 albertel 608: if (!$domainDescription && $lonCluster ne 'existing') {
1.27 albertel 609: open(IN,'<../'.$lonCluster.'_domain.tab');
1.22 albertel 610: while(<IN>) {
1.27 albertel 611: if (/^$perlvar{'lonDefDomain'}\:/) {
1.29 albertel 612: (undef,$domainDescription,$domainTabExtras)=split(/:/,$_,3);
1.22 albertel 613: chomp($domainDescription);
1.29 albertel 614: chomp($domainTabExtras);
1.22 albertel 615: last;
616: }
617: }
1.23 albertel 618: close(IN);
1.22 albertel 619: }
1.23 albertel 620: if (!$domainDescription) {
1.27 albertel 621: open(IN,'</home/httpd/lonTabs/domain.tab');
1.23 albertel 622: while(<IN>) {
1.27 albertel 623: if (/^$perlvar{'lonDefDomain'}\:/) {
1.29 albertel 624: (undef,$domainDescription,$domainTabExtras)=split(/:/,$_,3);
1.23 albertel 625: chomp($domainDescription);
1.29 albertel 626: chomp($domainTabExtras);
1.23 albertel 627: last;
628: }
629: }
630: close(IN);
631: }
1.43 raeburn 632: if (!$primaryLibServer and $lonCluster ne 'existing') {
633: open(IN,'<../'.$lonCluster.'_domain.tab');
634: while(<IN>) {
635: if (/^$perlvar{'lonDefDomain'}\:/) {
636: (undef,undef,undef,undef,undef,undef,undef,undef,
637: $primaryLibServer)=split(/:/,$_);
638: chomp($primaryLibServer);
639: }
640: }
641: close(IN);
642: if (!$primaryLibServer) {
643: open(IN,'<../'.$lonCluster.'_hosts.tab');
644: while(<IN>) {
645: if (/^([^\:]+)\:\Q$perlvar{'lonDefDomain'}\E\:library\:/) {
646: push(@libservers,$1);
647: }
648: }
649: close(IN);
650: if (@libservers == 1) {
651: $primaryLibServer = $libservers[0];
652: }
653: }
654: }
655: if (!$primaryLibServer) {
656: open(IN,'</home/httpd/lonTabs/domain.tab');
657: while(<IN>) {
658: if (/^$perlvar{'lonDefDomain'}\:/) {
659: (undef,undef,undef,undef,undef,undef,undef,undef,
660: $primaryLibServer)=split(/:/,$_);
661: chomp($primaryLibServer);
662: }
663: close(IN);
664: }
665: if (!$primaryLibServer) {
666: open(IN,'</home/httpd/lonTabs/hosts.tab');
667: while(<IN>) {
668: if (/^([^\:]+)\:\Q$perlvar{'lonDefDomain'}\E\:library\:/) {
669: push(@libservers,$1);
670: }
671: }
672: close(IN);
673: if (@libservers == 1) {
674: $primaryLibServer = $libservers[0];
675: }
676: }
677: }
1.23 albertel 678:
1.6 harris41 679: # implement editing logic below, interactively
1.22 albertel 680: # update loncapa.conf until 8 is entered
1.6 harris41 681:
682: $flag=0;
1.17 harris41 683:
1.6 harris41 684: while (!$flag) {
1.1 harris41 685: print(<<END);
686:
687: ===============================================================================
688: This is now the current configuration of your machine.
1.31 albertel 689: 1) Domain Name: $perlvar{'lonDefDomain'}
690: 2) Domain Description: $domainDescription
691: 3) Machine Name: $perlvar{'lonHostID'}
1.43 raeburn 692: 4) ID of primary library server for domain: $primaryLibServer
693: 5) System Administrator's E-mail Address: $perlvar{'lonAdmEMail'}
694: 6) Support E-mail Address: $perlvar{'lonSupportEMail'}
695: 7) Role: $perlvar{'lonRole'}
696: 8) Cache Expiration Time: $perlvar{'lonExpire'}
697: 9) Server Load: $perlvar{'lonLoadLim'}
698: 10) User Load: $perlvar{'lonUserLoadLim'}
699: 11) Allow only secure connections: $securestatus
700: 12) Everything is correct up above
1.6 harris41 701: END
1.38 www 702:
703: my $error='';
704: foreach my $v ($perlvar{'lonDefDomain'},$perlvar{'lonHostID'}) {
705: if (length($v)>16) { $error.="\nName $v too long"; }
706: if (length($v)<2) { $error.="\nName $v too short"; }
1.39 albertel 707: if ($v=~/capa/i) {
708: if ($v!~/^oucapa\d+$/ &&
709: ($v!~/^capa\d+$/ && $perlvar{'lonDefDomain'} eq 'uwsp')) {
710: $error.="\nName $v contains 'capa'";
711: }
712: }
1.41 albertel 713: foreach my $bad ('res','raw','userfiles','priv','adm','uploaded',
714: 'editupload') {
1.38 www 715: $error.="\nName $v reserved." if $v eq $bad;
716: }
717: if ($v=~/\W/) { $error.="\nName $v contains special characters"; }
718: }
1.42 albertel 719: if ($domainDescription!~/^[\(\)\-\w\s,]+$/) {
1.38 www 720: $error.="\nDomain Description contains special characters";
721: }
722: foreach my $v ($perlvar{'lonExpire'},$perlvar{'lonLoadLim'}) {
723: unless ($v=~/^[\d+\.]+$/) { $error.="\nNumber expected instead of $v"; }
724: }
725: unless (($perlvar{'lonRole'} eq 'library') || ($perlvar{'lonRole'} eq 'access')) {
726: $error.="\nInvalid Role";
1.17 harris41 727: }
1.43 raeburn 728:
729: if (!defined($primaryLibServer)) {
730: if (@libservers > 0) {
731: $error .= "No primary library server ID designated. Choose from: ".join(',',sort(@libservers));
732: } else {
733: $error .= "No library servers in this domain (including current server)";
734: }
735: } else {
736: if (length($primaryLibServer)>16) { $error.="\nPrimary Library Server ID: $primaryLibServer too long"; }
737: if (length($primaryLibServer)<2) { $error.="\nPrimary Library Server ID: $primaryLibServer too short"; }
738: if ($primaryLibServer =~/capa/i) {
739: if ($primaryLibServer!~/^oucapa\d+$/ &&
740: ($primaryLibServer!~/^capa\d+$/ && $perlvar{'lonDefDomain'} eq 'uwsp')) {
741: $error.="\nPrimary library server ID $primaryLibServer contains 'capa'";
742: }
743: }
744: foreach my $bad ('res','raw','userfiles','priv','adm','uploaded',
745: 'editupload') {
746: $error.="\nPrimary library server ID $primaryLibServer reserved." if $primaryLibServer eq $bad;
747: }
748: if ($primaryLibServer=~/\W/) { $error.="\nPrimary library server ID $primaryLibServer contains special characters"; }
749: }
750:
751:
1.38 www 752: if ($error) { print "\n*** ERRORS: $error\n"; }
1.6 harris41 753: print(<<END);
1.43 raeburn 754: ENTER A CHOICE OF 1-11 TO CHANGE, otherwise ENTER 12:
1.1 harris41 755: END
1.5 harris41 756: my $choice=<>;
757: chomp($choice);
1.6 harris41 758: if ($choice==1) {
759: print(<<END);
1.16 harris41 760: 1) Domain Name: $perlvar{'lonDefDomain'}
1.20 albertel 761: ENTER NEW VALUE (this is an internal value used to identify a group of
762: LON-CAPA machines, it must be alphanumerical, we suggest
763: using a part of your actual DNS domain. For example, for
764: the machine loncapa.msu.edu, we set the Domain to msu):
1.6 harris41 765: END
766: my $choice2=<>;
767: chomp($choice2);
1.8 harris41 768: $perlvar{'lonDefDomain'}=$choice2;
1.6 harris41 769: }
770: elsif ($choice==2) {
771: print(<<END);
1.20 albertel 772: 2) Domain Description: $domainDescription
773: ENTER NEW VALUE (this should be a string that describes your domain, spaces
774: and punctuation are fine except for ':'):
775: END
776: my $choice2=<>;
777: chomp($choice2);
778: $domainDescription=$choice2;
779: }
780: elsif ($choice==3) {
781: print(<<END);
782: 3) Machine Name: $perlvar{'lonHostID'}
783: ENTER NEW VALUE (this will be the name of the machine in the LON-CAPA network
784: it cannot contain any of '_' '-' '.' or ':'. We suggest that
785: if you are in the domain 'example' and are the first library
786: server you enter 'examplel1') :
1.6 harris41 787: END
788: my $choice2=<>;
789: chomp($choice2);
1.8 harris41 790: $perlvar{'lonHostID'}=$choice2;
1.6 harris41 791: }
1.20 albertel 792: elsif ($choice==4) {
1.6 harris41 793: print(<<END);
1.43 raeburn 794: 4) ID of primary library server for domain: $primaryLibServer
795: ENTER NEW VALUE (this will be the LON-CAPA Machine ID of a library server in
796: your domain; it cannot contain any of '_' '-' '.' or ':'.
797: This server will be where domain data which are not
798: associated with any specific home library server
799: will be stored (e.g., e-mail broadcast by Domain Coordinators
800: to users in the domain).
801: END
802: my $choice2=<>;
803: chomp($choice2);
804: $primaryLibServer=$choice2;
805: }
806: elsif ($choice==5) {
807: print(<<END);
808: 5) System Administrator's E-mail Address: $perlvar{'lonAdmEMail'}
1.6 harris41 809: ENTER NEW VALUE:
810: END
811: my $choice2=<>;
812: chomp($choice2);
1.9 harris41 813: $perlvar{'lonAdmEMail'}=$choice2;
1.6 harris41 814: }
1.43 raeburn 815: elsif ($choice==6) {
1.6 harris41 816: print(<<END);
1.43 raeburn 817: 6) Support E-mail Address: $perlvar{'lonSupportEMail'}
1.32 raeburn 818: ENTER NEW VALUE:
819: END
820: my $choice2=<>;
821: chomp($choice2);
822: $perlvar{'lonSupportEMail'}=$choice2;
823: }
1.43 raeburn 824: elsif ($choice==7) {
1.32 raeburn 825: print(<<END);
1.43 raeburn 826: 7) Role: $perlvar{'lonRole'}
1.20 albertel 827: ENTER NEW VALUE (this should be either 'access' or 'library'
828: if in doubt select 'library'):
1.6 harris41 829: END
830: my $choice2=<>;
831: chomp($choice2);
832: $perlvar{'lonRole'}=$choice2;
833: }
1.43 raeburn 834: elsif ($choice==8) {
1.6 harris41 835: print(<<END);
1.43 raeburn 836: 8) Cache Expiration Time: $perlvar{'lonExpire'}
1.20 albertel 837: ENTER NEW VALUE (in seconds, 86400 is a reasonable value):
1.6 harris41 838: END
839: my $choice2=<>;
840: chomp($choice2);
841: $perlvar{'lonExpire'}=$choice2;
842: }
1.43 raeburn 843: elsif ($choice==9) {
1.6 harris41 844: print(<<END);
1.43 raeburn 845: 9) Server Load: $perlvar{'lonLoadLim'}
1.6 harris41 846: ENTER NEW VALUE:
847: END
848: my $choice2=<>;
849: chomp($choice2);
850: $perlvar{'lonLoadLim'}=$choice2;
851: }
1.43 raeburn 852: elsif ($choice==10) {
1.25 albertel 853: print(<<END);
1.43 raeburn 854: 10) User Load: $perlvar{'lonUserLoadLim'}
1.25 albertel 855: Numer of users that can login before machine is 'overloaded'
1.26 albertel 856: ENTER NEW VALUE (integer value, 0 means there is no limit):
1.25 albertel 857: END
858: my $choice2=<>;
859: chomp($choice2);
860: $perlvar{'lonUserLoadLim'}=$choice2;
861: }
1.43 raeburn 862: elsif ($choice==11) {
1.31 albertel 863: print(<<END);
1.43 raeburn 864: 11) Allow only secure connections: $securestatus
1.31 albertel 865: The Lon-CAPA communication daemons lonc and lond can be configured to
866: allow only secure connections by default.
867:
868: POSSIBLE CHOICES:
869: 1) allow only secure connections and don't connect to machines that
870: can not be connected to securely
871: 2) allow only secure connections but allow this machine to connect to
872: machines that don't support secure connections
873: 3) allow insecure connections to this machine but only allow connections
874: to machines that support secure connections
875: 4) allow insecure connections
876: ENTER NEW VALUE (currenly $securenum):
877: END
878: my $choice2=<>;
879: chomp($choice2);
880: if ($choice2 eq '1') {
881: $perlvar{'loncAllowInsecure'}=0;$perlvar{'londAllowInsecure'}=0;
882: } elsif ($choice2 eq '2') {
883: $perlvar{'loncAllowInsecure'}=0;$perlvar{'londAllowInsecure'}=1;
884: } elsif ($choice2 eq '3') {
885: $perlvar{'loncAllowInsecure'}=1;$perlvar{'londAllowInsecure'}=0;
886: } elsif ($choice2 eq '4') {
887: $perlvar{'loncAllowInsecure'}=1;$perlvar{'londAllowInsecure'}=1;
888: }
889: ($securestatus,$securenum)=&securesetting(%perlvar);
890: }
1.43 raeburn 891: elsif (($choice==12) && (!$error)) {
1.6 harris41 892: $flag=1;
893: }
894: else {
1.38 www 895: print "Invalid input.\n";
1.6 harris41 896: }
897: }
1.7 harris41 898: open(OUT,">$confdir$filename") or
899: die("Cannot output to $confdir$filename\n");
900: foreach my $key (keys %perlvar) {
901: my $value=$perlvar{$key};
1.8 harris41 902: print(OUT <<END) unless $perlvarstatic{$key};
1.7 harris41 903: PerlSetVar $key $value
904: END
905: }
906: close(OUT);
1.1 harris41 907: </perlscript>
908: </file>
909: <file>
910: <target dist='default'>loncom/hosts.tab</target>
911: <perlscript mode='fg'>
912: unless (-l "<TARGET />") {
1.36 albertel 913: my $hostname=`hostname -f`;chomp($hostname);
1.15 harris41 914: $date=`date -I`; chomp($date);
915: $lonHostID=$perlvar{'lonHostID'};
916: $lonHostID=~s/\W//g;
917: $lineexistflag=0;
918: $hostidexistflag=0;
1.22 albertel 919: $line2insert=<<END;
1.35 albertel 920: $perlvar{'lonHostID'}:$perlvar{'lonDefDomain'}:$perlvar{'lonRole'}:$hostname
1.15 harris41 921: END
1.43 raeburn 922: $domaininsert="$perlvar{'lonDefDomain'}:$domainDescription:$domainTabExtras:$primaryLibServer\n";
1.23 albertel 923: if ($lonCluster eq 'standalone') {
924: open(OUT,'>../'.$lonCluster.'_hosts.tab') or
925: die('file generation error');
926: print(OUT $line2insert);
927: close(OUT);
1.27 albertel 928: open(OUT,'>../'.$lonCluster.'_domain.tab') or
929: die('file generation error');
930: print(OUT $domaininsert);
931: close(OUT);
1.23 albertel 932: }
1.15 harris41 933: if ($flag==1) {
1.6 harris41 934: `rm -f ../hosts.tab`;
1.15 harris41 935: open(IN,'<../'.$lonCluster.'_hosts.tab');
1.13 harris41 936: while(<IN>) {
937: if (/^$line2insert$/) {
938: $lineexistflag=1;
939: }
1.15 harris41 940: if (/^$lonHostID\:/) {
1.13 harris41 941: $hostidexistflag=1;
942: }
943: }
944: close(IN);
945: if ($hostidexistflag and !$lineexistflag) {
946: print <<END;
947: WARNING: $lonHostID already exists inside
1.15 harris41 948: loncapa/loncom/${lonCluster}_hosts.tab. The entry inside
949: ${lonCluster}_hosts.tab does not match your settings.
950: The entry inside ${lonCluster}_hosts.tab is being replaced
1.13 harris41 951: with your new values.
952: END
1.15 harris41 953: `grep -v "$lonHostID:" ../${lonCluster}_hosts.tab > ../new_${lonCluster}_hosts.tab`;
954: open(OUT,'>>../new_'.$lonCluster.'_hosts.tab') or
955: die("cannot open loncom/${lonCluster}_hosts.tab for output\n");
1.14 harris41 956: print(OUT $line2insert);
1.13 harris41 957: close(OUT);
1.15 harris41 958: `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
1.13 harris41 959: # email appropriate message
1.34 albertel 960: `echo "REPLACE:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "REPLACE:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
1.13 harris41 961: }
962: elsif ($hostidexistflag and $lineexistflag) {
1.15 harris41 963: print <<END;
964: Entry exists in ${lonCluster}_hosts.tab.
965: END
966: `ln -s ${lonCluster}_hosts.tab ../hosts.tab`;
967: # email appropriate message
968: `echo "STABLEUPDATE:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "STABLEUPDATE:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
1.13 harris41 969: }
1.15 harris41 970: elsif (!$hostidexistflag and !$lineexistflag) {
971: print <<END;
972: New entry for $lonCluster.
1.6 harris41 973: END
1.15 harris41 974: `cat ../${lonCluster}_hosts.tab > ../new_${lonCluster}_hosts.tab`;
1.21 albertel 975: open(OUT,'>>../new_'.$lonCluster.'_hosts.tab') or
976: die("cannot open loncom/new_${lonCluster}_hosts.tab for output\n");
1.15 harris41 977: print(OUT $line2insert);
978: close(OUT);
979: `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
980: # email appropriate message
981: `echo "INSERT:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "INSERT:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
1.27 albertel 982: }
983: }
984: $lineexistflag=0;
985: if ($flag==1) {
986: `rm -f ../domain.tab`;
987: open(IN,'<../'.$lonCluster.'_domain.tab');
988: while(<IN>) {
989: if (/^$domaininsert$/) {
990: $lineexistflag=1;
991: }
992: if (/^$perlvar{'lonDefDomain'}\:/) {
993: $domainexistflag=1;
994: }
995: }
996: close(IN);
997: if ($domainexistflag and !$lineexistflag) {
998: print <<END;
999: WARNING: $perlvar{'lonDefDomain'} already exists inside
1000: loncapa/loncom/${lonCluster}_domain.tab. The entry inside
1001: ${lonCluster}_domain.tab does not match your settings.
1002: The entry inside ${lonCluster}_domain.tab is being replaced
1003: with your new values.
1004: END
1005: `grep -v "$perlvar{'lonDefDomain'}:" ../${lonCluster}_domain.tab > ../new_${lonCluster}_domain.tab`;
1006: open(OUT,'>>../new_'.$lonCluster.'_domain.tab') or
1007: die("cannot open loncom/${lonCluster}_domain.tab for output\n");
1008: print(OUT $domaininsert);
1009: close(OUT);
1010: `ln -s new_${lonCluster}_domain.tab ../domain.tab`;
1011: # email appropriate message
1.34 albertel 1012: `echo "REPLACEdom:$lonCluster:$lonHostID:$date:$domaninsert" | mail -s "REPLACEdom:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
1.27 albertel 1013: }
1014: elsif ($domainexistflag and $lineexistflag) {
1015: print <<END;
1016: Entry exists in ${lonCluster}_domain.tab.
1017: END
1018: `ln -s ${lonCluster}_domain.tab ../domain.tab`;
1019: # email appropriate message
1020: `echo "STABLEUPDATEdom:$lonCluster:$lonHostID:$date:$domaininsert" | mail -s "STABLEUPDATEdom:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
1021: }
1022: elsif (!$domainexistflag and !$lineexistflag) {
1023: print <<END;
1024: New entry for $lonCluster.
1025: END
1026: `cat ../${lonCluster}_domain.tab > ../new_${lonCluster}_domain.tab`;
1027: open(OUT,'>>../new_'.$lonCluster.'_domain.tab') or
1028: die("cannot open loncom/new_${lonCluster}_domain.tab for output\n");
1029: print(OUT $domaininsert);
1030: close(OUT);
1031: `ln -s new_${lonCluster}_domain.tab ../domain.tab`;
1032: # email appropriate message
1033: `echo "INSERTdom:$lonCluster:$lonHostID:$date:$domaininsert" | mail -s "INSERTdom:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
1.6 harris41 1034: }
1035: }
1.1 harris41 1036: }
1037: </perlscript>
1038: </file>
1039: </files>
1040: </piml>
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/back.gif){kind=icon}
Return to updatequery.piml CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [LON-CAPA] / doc / loncapafiles