Annotation of doc/loncapafiles/updatequery.piml, revision 1.82
1.2 harris41 1: <!-- updatequery.piml -->
1.1 harris41 2:
1.82 ! raeburn 3: <!-- $Id: updatequery.piml,v 1.81 2016/04/09 19:04:39 raeburn Exp $ -->
1.1 harris41 4:
5: <!--
6:
7: This file is part of the LearningOnline Network with CAPA (LON-CAPA).
8:
9: LON-CAPA is free software; you can redistribute it and/or modify
10: it under the terms of the GNU General Public License as published by
11: the Free Software Foundation; either version 2 of the License, or
12: (at your option) any later version.
13:
14: LON-CAPA is distributed in the hope that it will be useful,
15: but WITHOUT ANY WARRANTY; without even the implied warranty of
16: MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17: GNU General Public License for more details.
18:
19: You should have received a copy of the GNU General Public License
20: along with LON-CAPA; if not, write to the Free Software
21: Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22:
23: /home/httpd/html/adm/gpl.txt
24:
25: http://www.lon-capa.org/
26:
27: -->
28:
29: <piml>
30: <targetroot>/</targetroot>
31: <files>
32: <file>
1.4 harris41 33: <target dist='default'>/</target>
1.1 harris41 34: <perlscript mode='fg'>
1.4 harris41 35: $|=1;
1.82 ! raeburn 36: use strict;
1.1 harris41 37: print(<<END);
38:
39:
40: *********************************************
41: *********************************************
42: **** ****
43: **** LON-CAPA SYSTEM INFORMATION REQUEST ****
44: **** ****
45: **** Please respond to the choices below ****
46: **** ****
47: *********************************************
48: *********************************************
49:
50: END
1.54 albertel 51: #sleep(3);
1.1 harris41 52: </perlscript>
53: </file>
54: <file>
1.22 albertel 55: <target dist='default'>loncom/hosts.tab</target>
56: <perlscript mode='fg'>
1.82 ! raeburn 57: my $lonCluster;
1.22 albertel 58: unless (-l "<TARGET />") {
59: print(<<END);
60:
61: ===============================================================================
1.30 www 62: Which cluster option would you like to have installed?
63: IMPORTANT: to take advantage of the cluster options 1) and 3),
64: you must contact lon-capa\@lon-capa.org.
65:
66: 1) PRODUCTION - you want to eventually connect this machine to the
67: LON-CAPA content sharing network. This setting is for
68: schools, colleges, and universities, that currently
69: are running - or in the future will run - courses
1.22 albertel 70: 2) STAND-ALONE - you want this machine to run in 'stand-alone' mode and
71: not be connected to other LON-CAPA machines for now
1.30 www 72: 3) DEVELOPMENT - you want to do software (not content!) development with
73: this workstation and eventually link it with the
74: workstations of other LON-CAPA software developers.
1.40 albertel 75: 4) RUNNING YOUR OWN CLUSTER - this machine is not in the standard LON-CAPA
76: clusters and won't be in the future and you want the existing
77: hosts.tab and domain.tab files to be left alone.
78: (This choice is unlikely what you want to select.)
1.22 albertel 79: END
80: # Option number 26 will install rawhide_hosts.tab, but
81: # the typical user does not want to be part of an intensive
82: # machine test cluster.
83:
84: # get input
85: # if valid then process, otherwise loop
1.82 ! raeburn 86: my $flag=0;
1.22 albertel 87: while (!$flag) {
88: print "ENTER 1, 2, 3, or 4:\n";
89: my $choice=<>;
90: chomp($choice);
91: if ($choice==1) {
92: $lonCluster='production'; $flag=1;
93: }
94: elsif ($choice==2) {
95: $lonCluster='standalone'; $flag=1;
96: }
97: elsif ($choice==3) {
98: $lonCluster='development'; $flag=1;
99: }
100: elsif ($choice==4) {
101: $lonCluster='existing'; $flag=1;
1.52 albertel 102: foreach my $file ('hosts.tab','dns_hosts.tab',
103: 'domain.tab','dns_domain.tab') {
104: if (-e '/home/httpd/lonTabs/'.$file) {
105: `cp /home/httpd/lonTabs/$file ../existing_$file`;
106: }
107: else {
108: print <<END;
109: There is no existing /home/httpd/lonTabs/$file
1.22 albertel 110: END
1.52 albertel 111: die('');
112: }
1.27 albertel 113: }
1.22 albertel 114: }
115: elsif ($choice==26) {
116: $lonCluster='rawhide'; $flag=1;
117: }
118: }
119: }
120: </perlscript>
121: </file>
122: <file>
1.10 harris41 123: <target dist='default'>/home/httpd/lonTabs/hosts.tab</target>
1.1 harris41 124: <perlscript mode='fg'>
1.4 harris41 125: $|=1;
1.20 albertel 126: my $domainDescription;
1.29 albertel 127: my $domainTabExtras;
1.43 raeburn 128: my $primaryLibServer;
1.60 raeburn 129: my $protocol;
1.65 raeburn 130: my $intdom;
1.43 raeburn 131: my @libservers = ();
1.1 harris41 132: unless (-e "<TARGET />") {
133: print(<<END);
134: WELCOME TO LON-CAPA!
135:
136: If you have questions, please visit http://install.lon-capa.org
1.32 raeburn 137: or contact helpdesk\@lon-capa.org.
1.1 harris41 138:
139: ===============================================================================
1.70 raeburn 140: The following 7 values are needed to configure LON-CAPA:
1.4 harris41 141: * Machine Role
1.8 harris41 142: * LON-CAPA Domain Name
1.82 ! raeburn 143: * LON-CAPA Machine ID Name
! 144: * Server Administration E-mail Address
1.68 raeburn 145: * LON-CAPA Domain's Primary Library Server Machine ID
146: * Web Server Protocol
147: * Internet Domain Name of Your Institution
1.32 raeburn 148: ===============================================================================
149:
150: In addition, a Support E-mail Address can also be included. If
151: an address is included then one of the options in the LON-CAPA
152: help menu will be a link to a form that a user will complete to
153: request LON-CAPA help.
154:
1.1 harris41 155: END
1.3 harris41 156:
1.4 harris41 157: open(OUT,'>/tmp/loncapa_updatequery.out');
158: close(OUT);
159:
1.3 harris41 160: # query for Machine Role
161: print(<<END);
162: **** Machine Role ****
163: Library server (recommended if first-time installation of LON-CAPA):
164: Servers that are repositories of authoritative educational resources.
165: These servers also provide the construction space by which instructors
166: assemble their classroom online material.
167: Access server:
168: Servers that load-balance high-traffic delivery of educational resources
169: over the world-wide web.
1.4 harris41 170: 1) Will this be a library server? (recommended if this is your first install)
1.3 harris41 171: 2) Or, will this be an access server?
172: END
1.4 harris41 173: my $flag=0;
174: my $r='';
175: my $lonRole;
176: while (!$flag) {
177: print "ENTER A CHOICE OF 1 or 2:\n";
178: my $choice=<>;
179: chomp($choice);
180: if ($choice==1) {
181: open(OUT,'>>/tmp/loncapa_updatequery.out');
182: print(OUT 'lonRole'."\t".'library'."\n");
183: close(OUT);
184: $lonRole='library';
185: $r='l';
186: $flag=1;
187: }
188: elsif ($choice==2) {
189: open(OUT,'>>/tmp/loncapa_updatequery.out');
190: print(OUT 'lonRole'."\t".'access'."\n");
191: close(OUT);
192: $lonRole='access';
193: $r='a';
194: $flag=2;
195: }
196: else {
197:
198: }
199: }
1.3 harris41 200:
201: # need to recommend a machine ID name (ipdomain.l.somenumber)
1.36 albertel 202: my $hostname=`hostname -f`; chomp($hostname);
1.4 harris41 203: my $ipdomain='';
204: if ($hostname=~/([^\.]*)\.([^\.]*)$/) {
205: $ipdomain=$1;
206: }
1.1 harris41 207:
208: print(<<END);
209:
1.8 harris41 210: **** Domain ****
1.45 www 211: [This does NOT need to correspond to internet address domains.
212: Please make this name short AND descriptive of your organization.
213: Domain names are close to impossible to change later!!!
214: Good examples might be "msu" or "bionet" or "vermontcc".
215: Bad examples are "physics" (too general)
1.37 www 216: or "michiganstateuniversity" (too long)
217: or "msuedu" (internet domain, just make it "msu")
1.45 www 218: or "msuphysics" (only if there is a good reason to limit to department
219: - we don't know of one)
1.37 www 220: or "mydomain" (what is that?)
1.45 www 221: Avoid multiple domains at the same institution, even if it means that you
222: have to actually work together with your colleagues. You can still run
223: multiple library servers within the same domain.
224: If this domain is eventually going to be part of the main production
1.82 ! raeburn 225: cluster, you MUST contact the LON-CAPA group at MSU (loncapa\@loncapa.org)
1.45 www 226: to have a domain name assigned, and then use it exactly as given. This is
227: also true for test installs that might eventually turn into production setups.
228: Stop now if you didn't do so.]
1.1 harris41 229: END
1.8 harris41 230:
231: # get domain name
1.1 harris41 232: # accept if valid, if not valid, tell user and repeat
1.4 harris41 233: $flag=0;
1.8 harris41 234: my $lonDefDomain;
1.4 harris41 235: while (!$flag) {
236: if ($ipdomain) {
237: print(<<END);
1.8 harris41 238: ENTER LONCAPA DOMAIN [$ipdomain]:
1.4 harris41 239: END
240: }
241: else {
242: print(<<END);
1.8 harris41 243: ENTER LONCAPA DOMAIN:
1.4 harris41 244: END
245: }
246: my $choice=<>;
247: chomp($choice);
1.18 harris41 248: my $bad_domain_flag=0;
1.41 albertel 249: my @bad_domain_names=('res','raw','userfiles','priv','adm','uploaded',
250: 'editupload');
1.18 harris41 251: foreach my $bad (@bad_domain_names) {
252: $bad_domain_flag=1 if $choice eq $bad;
253: }
1.37 www 254: if ($choice=~/capa/i) {
255: $bad_domain_flag=1;
256: }
1.8 harris41 257: if ($ipdomain and $choice=~/^\s*$/) {
258: $choice=$ipdomain;
1.4 harris41 259: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.8 harris41 260: print(OUT 'lonDefDomain'."\t".$choice."\n");
1.4 harris41 261: close(OUT);
1.8 harris41 262: $lonDefDomain=$choice;
1.4 harris41 263: $flag=1;
1.51 albertel 264: } elsif (length($choice)>35) {
1.37 www 265: print "Name too long\n";
266: } elsif (length($choice)<2) {
267: print "Name too short\n";
1.38 www 268: } elsif ($bad_domain_flag) {
269: print "Invalid input ('$choice' conflicts with LON-CAPA namespace).\n";
270: print "Please try something different than '$choice'\n";
1.51 albertel 271: } elsif ($choice!~/\_/ and $choice=~/^[\w\-.]+$/) {
1.4 harris41 272: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.8 harris41 273: print(OUT 'lonDefDomain'."\t".$choice."\n");
1.4 harris41 274: close(OUT);
1.8 harris41 275: $lonDefDomain=$choice;
276: $r='l';
1.4 harris41 277: $flag=1;
1.37 www 278: } else {
1.51 albertel 279: print "Invalid input (only alphanumeric characters, '-', and '.' supported).\n";
1.4 harris41 280: }
281: }
1.1 harris41 282:
1.20 albertel 283:
284: # get domain description
285: # accept if valid, if not valid, tell user and repeat
286: $flag=0;
287:
288: while (!$flag) {
289: print(<<END);
290:
291: **** Domain Description ****
292: String describing the domain, to be shown to users.
293: [Example, msu is Michigan State University]
294: ENTER DOMAIN DESCRIPTION:
295: END
296:
297: my $choice=<>;
298: chomp($choice);
299: if ($choice!~/:/) {
300: open(OUT,'>>/tmp/loncapa_updatequery.out');
301: print(OUT 'domainDescription'."\t".$choice."\n");
302: close(OUT);
303: $domainDescription=$choice;
304: $flag=1;
305: }
306: else {
307: print "Invalid input (no ':' allowed).\n";
308: }
309: }
310:
1.8 harris41 311: my $lonHostID;
312: if ($lonDefDomain) {
313: $lonHostID=$lonDefDomain.$r.int(1+rand(9)); # should be probably also detect
314: # against the hosts.tab
315: }
316:
1.1 harris41 317: print(<<END);
318:
1.8 harris41 319: **** Machine ID Name ****
1.45 www 320: [This does NOT need to correspond to internet address names;
1.8 harris41 321: this name MUST be unique to the whole LON-CAPA network;
1.45 www 322: we recommend that you use a name based off of your institution.
323: Good examples: "msul1" or "bioneta2".
324: Bad examples: "loncapabox" or "studentsinside".
1.37 www 325: Note that machine names are very hard to change later.]
1.1 harris41 326: END
1.8 harris41 327: # get machine name
1.1 harris41 328: # accept if valid, if not valid, tell user and repeat
1.4 harris41 329: $flag=0;
330: while (!$flag) {
331: if ($ipdomain) {
332: print(<<END);
1.8 harris41 333: ENTER LONCAPA MACHINE ID [$lonHostID]:
1.4 harris41 334: END
335: }
336: else {
337: print(<<END);
1.8 harris41 338: ENTER LONCAPA MACHINE ID:
1.4 harris41 339: END
340: }
341: my $choice=<>;
342: chomp($choice);
1.37 www 343: if ($choice=~/capa/i) {
344: print "Invalid input (names containing 'capa' are reserved).\n";
345: } elsif ($lonHostID and $choice=~/^\s*$/) {
1.8 harris41 346: $choice=$lonHostID;
1.4 harris41 347: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.8 harris41 348: print(OUT 'lonHostID'."\t".$choice."\n");
1.4 harris41 349: close(OUT);
1.8 harris41 350: $lonHostID=$choice;
1.4 harris41 351: $flag=1;
1.51 albertel 352: } elsif (length($choice)>45) {
1.37 www 353: print "Name too long\n";
354: } elsif (length($choice)<4) {
355: print "Name too short\n";
1.51 albertel 356: } elsif ($choice!~/\_/ and $choice=~/^[\w\-.]+$/) {
1.4 harris41 357: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.8 harris41 358: print(OUT 'lonHostID'."\t".$choice."\n");
1.4 harris41 359: close(OUT);
1.8 harris41 360: $lonHostID=$choice;
1.4 harris41 361: $flag=1;
1.37 www 362: } else {
1.51 albertel 363: print "Invalid input (only alphanumeric characters, '-', and '.' supported).\n";
1.4 harris41 364: }
365: }
1.1 harris41 366:
1.43 raeburn 367: # get primary library server in domain
368: if ($lonRole eq 'library') {
369: if (!grep/^\Q$lonHostID\E$/,@libservers) {
370: push(@libservers,$lonHostID);
371: }
372: if (@libservers == 1) {
373: $primaryLibServer = $libservers[0];
374: }
375: }
1.68 raeburn 376:
377: $flag=0;
1.43 raeburn 378: while (!$flag) {
379: print(<<END);
380: **** Domain's Primary Library Server ID ****
381: This should be the LON-CAPA machine ID of a library server in your
382: domain. If you only have a single library server in your domain, then
383: the Primary Library server ID will be the machine ID of that server.
384: This server will be where domain data which are not associated with any
385: specific home library server will be stored (e.g., e-mail broadcast by
386: administrators to users in the domain).
387: END
388: if (defined($primaryLibServer)) {
389: print(<<END);
390: ENTER DOMAIN'S PRIMARY LIBRARY SERVER ID [$primaryLibServer]:
391: END
392: } elsif (@libservers > 0) {
393: print(<<END);
394: ENTER DOMAIN'S PRIMARY LIBRARY SERVER ID [$libservers[0]]
395: END
396: } else {
397: print (<<END);
398: No library servers could be identified for this domain. If you have already installed LON-CAPA on a different server (designated as a library server) in this domain, please enter the LONCAPA MACHINE ID of that server. If not, you will need to install a LON-CAPA library server. Enter the MACHINE ID of the server you plan to designate as a library server.
399: END
400: }
401:
402: my $choice=<>;
403: chomp($choice);
404: if ($primaryLibServer and $choice=~/^\s*$/) {
405: $choice=$primaryLibServer;
406: open(OUT,'>>/tmp/loncapa_updatequery.out');
407: print(OUT 'primaryLibServer'."\t".$choice."\n");
408: close(OUT);
409: $flag=1;
1.51 albertel 410: } elsif (length($choice)>35) {
1.43 raeburn 411: print "Name too long\n";
412: } elsif (length($choice)<4) {
413: print "Name too short\n";
1.51 albertel 414: } elsif ($choice!~/\_/ and $choice=~/^[\w\-.]+$/) {
1.43 raeburn 415: open(OUT,'>>/tmp/loncapa_updatequery.out');
416: print(OUT 'primaryLibServer'."\t".$choice."\n");
417: close(OUT);
418: $primaryLibServer=$choice;
419: $flag=1;
420: } else {
1.51 albertel 421: print "Invalid input (only alphanumeric characters, '-', and '.' supported).\n";
1.43 raeburn 422: }
423: }
424:
425:
1.32 raeburn 426: # get admin e-mail address
1.4 harris41 427: # accept if valid, if not valid, tell user and repeat
428: $flag=0;
1.9 harris41 429: my $lonAdmEMail;
1.4 harris41 430: while (!$flag) {
1.1 harris41 431: print(<<END);
432:
1.55 albertel 433: **** Server Administrators E-mail ****
1.1 harris41 434: E-mail address of the person who will manage this machine
1.4 harris41 435: [should be in the form somebody\@somewhere]
1.32 raeburn 436: ENTER ADMIN E-MAIL ADDRESS:
1.1 harris41 437: END
438:
1.4 harris41 439: my $choice=<>;
440: chomp($choice);
441: if ($choice=~/\@/) {
442: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.9 harris41 443: print(OUT 'lonAdmEMail'."\t".$choice."\n");
1.4 harris41 444: close(OUT);
1.9 harris41 445: $lonAdmEMail=$choice;
1.4 harris41 446: $flag=1;
447: }
448: else {
449: print "Invalid input (this needs to look like an e-mail address!).\n";
450: }
451: }
452:
1.32 raeburn 453:
454: # get support e-mail address
455: # accept if valid, if not valid, tell user and repeat
456: $flag=0;
457: my $lonSupportEMail;
458: while (!$flag) {
459: print(<<END);
460:
461: **** Support E-mail ****
462: E-mail address of the person who will receive
463: help requests from LON-CAPA users who access
464: the system via this server. If the address is left blank,
465: then a help support form will not be displayed
466: as part of the help menu.
467: [should be in the form somebody\@somewhere]
468: ENTER SUPPORT E-MAIL ADDRESS:
469: END
470:
471: my $choice=<>;
472: chomp($choice);
473: $choice =~ s/\s//g;
1.33 albertel 474: if ( ($choice=~/\@/) || $choice eq '') {
1.32 raeburn 475: open(OUT,'>>/tmp/loncapa_updatequery.out');
476: print(OUT 'lonSupportEMail'."\t".$choice."\n");
477: close(OUT);
478: $lonSupportEMail=$choice;
479: $flag=1;
480: }
481: else {
482: print "Invalid input (this either needs to be blank, or look like an e-mail address!).\n";
483: }
484: }
485:
1.68 raeburn 486: # get protocol
487: # accept if valid, if not valid, tell user and repeat
488: $flag=0;
1.60 raeburn 489: while (!$flag) {
490: print(<<END);
491:
492: **** Web Server Protocol ****
493: If you plan to run the Apache server with SSL enabled,
494: the protocol should be: https; otherwise it should be http.
1.68 raeburn 495: ENTER WEB SERVER PROTOCOL [http]:
1.60 raeburn 496: END
497:
498: my $choice=<>;
499: chomp($choice);
1.65 raeburn 500: if ($choice =~ /^https?$/) {
1.60 raeburn 501: open(OUT,'>>/tmp/loncapa_updatequery.out');
502: print(OUT 'protocol'."\t".$choice."\n");
503: close(OUT);
504: $protocol=$choice;
505: $flag=1;
1.68 raeburn 506: } elsif ($choice eq '') {
507: open(OUT,'>>/tmp/loncapa_updatequery.out');
508: print(OUT 'protocol'."\t".'http'."\n");
509: close(OUT);
510: $protocol = 'http';
511: $flag = 1;
512: } else {
1.60 raeburn 513: print "Invalid input (only http or https allowed).\n";
514: }
515: }
1.32 raeburn 516:
1.68 raeburn 517: # get internet domain
518: # accept if valid, if not valid, tell user and repeat
519: $flag=0;
1.65 raeburn 520: while (!$flag) {
521: print(<<END);
522:
523: **** Internet Domain Name of Your Institution ****
524:
525: The internet domain name used for servers at your institution
526: should be provided. This will be similar to: ustate.edu or
527: topcollege.ac.uk or my.hostingcompany.com, i.e., the part of
528: a server hostname which indicates to which organization the
529: server belongs.
530:
531: ENTER INTERNET DOMAIN NAME:
532: END
533:
534: my $choice=<>;
535: chomp($choice);
536: if ($choice =~/[^.]+\.[^.]+/) {
537: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.68 raeburn 538: print(OUT 'internet domain'."\t".$choice."\n");
1.65 raeburn 539: close(OUT);
540: $intdom=$choice;
541: $flag=1;
542: }
543: else {
544: print "Invalid input (must be at least two levels separated by . - e.g., ustate.edu).\n";
545: }
546: }
547:
548:
1.1 harris41 549: # update loncapa.conf
1.49 raeburn 550: my $confdir = '/etc/httpd/conf/';
1.81 raeburn 551: if ('<DIST />' eq 'sles10' || '<DIST />' eq 'sles11' || '<DIST />' eq 'sles12' || '<DIST />' eq 'suse10.1' || '<DIST />' eq 'suse10.2' || '<DIST />' eq 'suse10.3' || '<DIST />' eq 'suse11.1' || '<DIST />' eq 'suse11.2' || '<DIST />' eq 'suse11.3' || '<DIST />' eq 'suse11.4' || '<DIST />' eq 'suse12.1' || '<DIST />' eq 'suse12.2' || '<DIST />' eq 'suse12.3' || '<DIST />' eq 'suse13.1' || '<DIST />' eq 'suse13.2' || '<DIST />' eq 'debian5' || '<DIST />' eq 'debian6' || '<DIST />' eq 'ubuntu6' || '<DIST />' eq 'ubuntu8' || '<DIST />' eq 'ubuntu10' || '<DIST />' eq 'ubuntu12' || '<DIST />' eq 'ubuntu14' || '<DIST />' eq 'ubuntu16') {
1.49 raeburn 552: $confdir = '/etc/apache2/';
553: }
1.5 harris41 554: my $filename='loncapa.conf';
555: my %perlvar;
556: if (-e "$confdir$filename") {
557: open(CONFIG,'<'.$confdir.$filename) or die("Can't read $confdir$filename");
558: while (my $configline=<CONFIG>) {
559: if ($configline =~ /^[^\#]*PerlSetVar/) {
560: my ($unused,$varname,$varvalue)=split(/\s+/,$configline);
561: chomp($varvalue);
1.12 harris41 562: $perlvar{$varname}=$varvalue if $varvalue!~/^\{\[\[\[\[/;
1.5 harris41 563: }
564: }
565: close(CONFIG);
566: }
567: $perlvar{'lonHostID'}=$lonHostID;
568: $perlvar{'lonDefDomain'}=$lonDefDomain;
1.9 harris41 569: $perlvar{'lonAdmEMail'}=$lonAdmEMail;
1.32 raeburn 570: $perlvar{'lonSupportEMail'}=$lonSupportEMail;
1.5 harris41 571: $perlvar{'lonRole'}=$lonRole;
1.16 harris41 572: unless ($perlvar{'lonLoadLim'} and $perlvar{'lonLoadLim'}!~/\{\[\[\[\[/) {
1.5 harris41 573: $perlvar{'lonLoadLim'}='2.00';
574: }
1.25 albertel 575: unless ($perlvar{'lonUserLoadLim'} and $perlvar{'lonUserLoadLim'}!~/\{\[\[\[\[/) {
576: $perlvar{'lonUserLoadLim'}='0';
577: }
1.16 harris41 578: unless ($perlvar{'lonExpire'} and $perlvar{'lonExpire'}!~/\{\[\[\[\[/) {
1.5 harris41 579: $perlvar{'lonExpire'}='86400';
580: }
1.16 harris41 581: unless ($perlvar{'lonReceipt'} and $perlvar{'lonReceipt'}!~/\{\[\[\[\[/) {
1.5 harris41 582: my $lonReceipt='';
1.11 harris41 583: srand(time ^ $$ ^ unpack "%L*", `ps axww | gzip`);
1.82 ! raeburn 584: my @alnum=(0..9,"a".."z");
1.5 harris41 585: foreach my $i (1..20) {
586: $lonReceipt.=$alnum[int(rand(36))];
587: }
588: $perlvar{'lonReceipt'}=$lonReceipt;
589: }
590: open(OUT,">$confdir$filename") or
591: die("Cannot output to $confdir$filename\n");
592: foreach my $key (keys %perlvar) {
593: my $value=$perlvar{$key};
1.49 raeburn 594: my $line = "PerlSetVar $key $value";
595: if ($value eq '') {
596: $line = '#'.$line;
597: }
1.5 harris41 598: print(OUT <<END);
1.49 raeburn 599: $line
1.5 harris41 600: END
601: }
602: close(OUT);
1.1 harris41 603: }
604: </perlscript>
605: </file>
606: <file>
1.49 raeburn 607: <target dist='default'>/etc/httpd/conf/</target>
1.81 raeburn 608: <target dist='sles10 sles11 sles12 suse10.1 suse10.2 suse10.3 suse11.1 suse11.2 suse11.3 suse11.4 suse12.1 suse12.2 suse12.3 suse13.1 suse13.2 debian5 debian6 ubuntu6 ubuntu8 ubuntu10 ubuntu12 ubuntu14 ubuntu16'>/etc/apache2/</target>
1.1 harris41 609: <perlscript mode='fg'>
1.31 albertel 610: sub securesetting {
611: my (%perlvar)=@_;
612: my $securestatus='unknown';
613: my $securenum='';
614: if ( $perlvar{'loncAllowInsecure'}&& $perlvar{'londAllowInsecure'}) {
615: $securestatus='no'; $securenum='4';
616: } elsif ( $perlvar{'loncAllowInsecure'}&& !$perlvar{'londAllowInsecure'}) {
617: $securestatus='lond'; $securenum='3';
618: } elsif (!$perlvar{'loncAllowInsecure'}&& $perlvar{'londAllowInsecure'}) {
619: $securestatus='lonc'; $securenum='2';
620: } elsif (!$perlvar{'loncAllowInsecure'}&& !$perlvar{'londAllowInsecure'}) {
621: $securestatus='yes (lond and lonc)'; $securenum='1';
622: }
623: return ($securestatus,$securenum);
624: }
1.1 harris41 625: # read values from loncapa.conf
1.49 raeburn 626: my $confdir = "<TARGET />";
1.5 harris41 627: my $filename='loncapa.conf';
628: my %perlvar;
1.31 albertel 629: my ($securestatus,$securenum);
1.5 harris41 630: if (-e "$confdir$filename") {
631: open(CONFIG,'<'.$confdir.$filename) or
632: die("Can't read $confdir$filename");
633: while (my $configline=<CONFIG>) {
634: if ($configline =~ /^[^\#]*PerlSetVar/) {
635: my ($unused,$varname,$varvalue)=split(/\s+/,$configline);
636: chomp($varvalue);
637: $perlvar{$varname}=$varvalue;
638: }
639: }
640: close(CONFIG);
641: }
1.16 harris41 642: unless ($perlvar{'lonLoadLim'} and $perlvar{'lonLoadLim'}!~/\{\[\[\[\[/) {
643: $perlvar{'lonLoadLim'}='2.00';
644: }
1.25 albertel 645: unless ($perlvar{'lonUserLoadLim'} and $perlvar{'lonUserLoadLim'}!~/\{\[\[\[\[/) {
646: $perlvar{'lonUserLoadLim'}='0';
647: }
1.16 harris41 648: unless ($perlvar{'lonExpire'} and $perlvar{'lonExpire'}!~/\{\[\[\[\[/) {
649: $perlvar{'lonExpire'}='86400';
650: }
1.31 albertel 651: unless ($perlvar{'londAllowInsecure'} and $perlvar{'londAllowInsecure'}!~/\{\[\[\[\[/) {
652: $perlvar{'londAllowInsecure'}='1';
653: }
654: unless ($perlvar{'loncAllowInsecure'} and $perlvar{'loncAllowInsecure'}!~/\{\[\[\[\[/) {
655: $perlvar{'loncAllowInsecure'}='1';
656: }
657: ($securestatus,$securenum)=&securesetting(%perlvar);
1.16 harris41 658: unless ($perlvar{'lonReceipt'} and $perlvar{'lonReceipt'}!~/\{\[\[\[\[/) {
659: my $lonReceipt='';
660: srand(time ^ $$ ^ unpack "%L*", `ps axww | gzip`);
1.82 ! raeburn 661: my @alnum=(0..9,"a".."z");
1.16 harris41 662: foreach my $i (1..20) {
663: $lonReceipt.=$alnum[int(rand(36))];
664: }
665: $perlvar{'lonReceipt'}=$lonReceipt;
666: }
1.7 harris41 667: my %perlvarstatic;
668: if (-e "${confdir}loncapa_apache.conf") {
669: open(CONFIG,'<'.$confdir.'loncapa_apache.conf') or
670: die("Can't read ${confdir}loncapa_apache.conf");
671: while (my $configline=<CONFIG>) {
672: if ($configline =~ /^[^\#]*PerlSetVar/) {
673: my ($unused,$varname,$varvalue)=split(/\s+/,$configline);
674: chomp($varvalue);
675: $perlvarstatic{$varname}=$varvalue;
676: }
677: }
678: close(CONFIG);
679: }
1.55 albertel 680:
681: my (@hosts_files, @domain_files);
682: if ( $lonCluster ne 'existing') {
683: push(@domain_files,'../'.$lonCluster.'_domain.tab',
684: '../'.$lonCluster.'_dns_domain.tab');
685: push(@hosts_files,'../'.$lonCluster.'_hosts.tab',
686: '../'.$lonCluster.'_dns_hosts.tab');
687: }
688: push(@domain_files,'/home/httpd/lonTabs/domain.tab',
689: '/home/httpd/lonTabs/dns_domain.tab');
690: push(@hosts_files,'/home/httpd/lonTabs/hosts.tab',
691: '/home/httpd/lonTabs/dns_hosts.tab');
692:
1.23 albertel 693: if (!$domainDescription) {
1.55 albertel 694: foreach my $file (@domain_files) {
695: open(IN,'<'.$file);
696: while(my $line = <IN>) {
697: if ($line =~ /^\Q$perlvar{'lonDefDomain'}\E\:/) {
698: (undef,$domainDescription,$domainTabExtras)=split(/:/,$line,3);
699: chomp($domainDescription);
700: chomp($domainTabExtras);
1.60 raeburn 701: # the remaining field (primary lib server) is handled later
1.55 albertel 702: $domainTabExtras = join(':',(split(/:/,$domainTabExtras))[0..5]);
703: last;
704: }
705: }
706: close(IN);
707: last if ($domainDescription);
708: }
1.23 albertel 709: }
1.55 albertel 710:
1.60 raeburn 711: if (!$protocol) {
712: foreach my $file (@hosts_files) {
713: open(IN,'<'.$file);
714: while(my $line = <IN>) {
1.66 raeburn 715: if ($line =~ /^\Q$perlvar{'lonHostID'}\E:\Q$perlvar{'lonDefDomain'}\E\:(?:access|library)\:[^:]+\:(https?)/) {
1.60 raeburn 716: $protocol = $1;
1.66 raeburn 717: chomp($protocol);
1.60 raeburn 718: last;
719: }
720: }
721: }
722: }
723:
724: if (!$protocol) {
725: $protocol = 'http';
726: }
727:
1.65 raeburn 728: if (!$intdom) {
729: foreach my $file (@hosts_files) {
730: open(IN,'<'.$file);
731: while(my $line = <IN>) {
1.66 raeburn 732: if ($line =~ /^\Q$perlvar{'lonHostID'}\E:\Q$perlvar{'lonDefDomain'}\E\:(?:access|library)\:[^:]+\:https?\:([^:]+)/) {
1.65 raeburn 733: $intdom = $1;
1.66 raeburn 734: chomp($intdom);
1.65 raeburn 735: last;
736: }
737: }
738: }
739: }
740:
1.82 ! raeburn 741: while(!$primaryLibServer && (@hosts_files || @domain_files)) {
1.55 albertel 742: my $file = shift(@domain_files);
743: open(IN,'<'.$file);
744: while(my $line = <IN>) {
745: if ($line =~ /^\Q$perlvar{'lonDefDomain'}\E\:/) {
746: $primaryLibServer=(split(/:/,$line))[8];
1.43 raeburn 747: chomp($primaryLibServer);
748: }
749: }
750: close(IN);
1.55 albertel 751: last if ($primaryLibServer);
752: $file = shift(@hosts_files);
753: open(IN,'<'.$file);
754: while(my $line = <IN>) {
755: if ($line =~ /^([^\:]+)\:\Q$perlvar{'lonDefDomain'}\E\:library\:/) {
756: push(@libservers,$1);
757: }
758: }
1.58 albertel 759: # make list unique
760: @libservers = keys(%{{ map { $_ => 1 } (@libservers) }});
1.55 albertel 761: close(IN);
762: if (@libservers == 1) {
763: $primaryLibServer = $libservers[0];
764: }
1.43 raeburn 765: }
1.23 albertel 766:
1.6 harris41 767: # implement editing logic below, interactively
1.65 raeburn 768: # update loncapa.conf until 14 is entered
1.6 harris41 769:
1.82 ! raeburn 770: my $flag=0;
1.17 harris41 771:
1.6 harris41 772: while (!$flag) {
1.1 harris41 773: print(<<END);
774:
775: ===============================================================================
776: This is now the current configuration of your machine.
1.31 albertel 777: 1) Domain Name: $perlvar{'lonDefDomain'}
778: 2) Domain Description: $domainDescription
779: 3) Machine Name: $perlvar{'lonHostID'}
1.43 raeburn 780: 4) ID of primary library server for domain: $primaryLibServer
1.47 albertel 781: 5) Server Administrator's E-mail Address: $perlvar{'lonAdmEMail'}
1.43 raeburn 782: 6) Support E-mail Address: $perlvar{'lonSupportEMail'}
1.60 raeburn 783: 7) Web Server Protocol (http or https): $protocol
1.65 raeburn 784: 8) Internet Domain Name: $intdom
785: 9) Role: $perlvar{'lonRole'}
786: 10) Cache Expiration Time: $perlvar{'lonExpire'}
787: 11) Server Load: $perlvar{'lonLoadLim'}
788: 12) User Load: $perlvar{'lonUserLoadLim'}
789: 13) Allow only secure connections: $securestatus
790: 14) Everything is correct up above
1.6 harris41 791: END
1.38 www 792:
1.54 albertel 793: my @error;
1.38 www 794: foreach my $v ($perlvar{'lonDefDomain'},$perlvar{'lonHostID'}) {
1.82 ! raeburn 795: if (length($v)>35) { push(@error,"Name $v too long"); }
! 796: if (length($v)<2) { push(@error,"Name $v too short"); }
1.39 albertel 797: if ($v=~/capa/i) {
798: if ($v!~/^oucapa\d+$/ &&
799: ($v!~/^capa\d+$/ && $perlvar{'lonDefDomain'} eq 'uwsp')) {
1.54 albertel 800: push(@error,"Name $v contains 'capa'");
1.39 albertel 801: }
802: }
1.41 albertel 803: foreach my $bad ('res','raw','userfiles','priv','adm','uploaded',
804: 'editupload') {
1.54 albertel 805: push(@error,"\nName $v reserved.") if $v eq $bad;
1.38 www 806: }
1.54 albertel 807: if ($v=~/[^\w\-.]/) { push(@error,"Name $v contains special characters"); }
1.38 www 808: }
1.53 albertel 809: if ($domainDescription =~ /^\s*$/) {
1.54 albertel 810: push(@error,"Domain Description is blank.");
1.53 albertel 811: } elsif ($domainDescription!~/^[\(\)\-\w\s,]+$/) {
1.54 albertel 812: push(@error,"Domain Description contains special characters.");
1.38 www 813: }
814: foreach my $v ($perlvar{'lonExpire'},$perlvar{'lonLoadLim'}) {
1.54 albertel 815: unless ($v=~/^[\d+\.]+$/) { push(@error,"Number expected instead of $v"); }
1.38 www 816: }
817: unless (($perlvar{'lonRole'} eq 'library') || ($perlvar{'lonRole'} eq 'access')) {
1.54 albertel 818: push(@error,"Invalid Role");
1.17 harris41 819: }
1.43 raeburn 820:
1.60 raeburn 821: unless (($protocol eq 'http') || ($protocol eq 'https')) {
822: push(@error,"Invalid Protocol (must be http or https");
823: }
824:
1.65 raeburn 825: if (!defined($intdom)) {
826: push(@error,"No internet domain name designated. Enter something like ustate.edu");
1.71 raeburn 827: } elsif ($intdom !~ /[^.]+\.\w{2,6}$/) {
1.65 raeburn 828: push(@error,"Invalid Internet domain name (must be at least two levels separated by . - e.g., ustate.edu");
829: }
830:
1.43 raeburn 831: if (!defined($primaryLibServer)) {
832: if (@libservers > 0) {
1.54 albertel 833: push(@error,"No primary library server ID designated. Choose from: ".join(',',sort(@libservers)));
1.43 raeburn 834: } else {
1.54 albertel 835: push(@error,"No library servers in this domain (including current server)");
1.43 raeburn 836: }
837: } else {
1.54 albertel 838: if (length($primaryLibServer)>35) { push(@error,"Primary Library Server ID: $primaryLibServer too long"); }
839: if (length($primaryLibServer)<2) { push(@error,"Primary Library Server ID: $primaryLibServer too short"); }
1.43 raeburn 840: if ($primaryLibServer =~/capa/i) {
841: if ($primaryLibServer!~/^oucapa\d+$/ &&
842: ($primaryLibServer!~/^capa\d+$/ && $perlvar{'lonDefDomain'} eq 'uwsp')) {
1.54 albertel 843: push(@error,"Primary library server ID $primaryLibServer contains 'capa'")
1.43 raeburn 844: }
845: }
846: foreach my $bad ('res','raw','userfiles','priv','adm','uploaded',
847: 'editupload') {
1.54 albertel 848: push(@error,"Primary library server ID $primaryLibServer reserved.") if $primaryLibServer eq $bad;
1.43 raeburn 849: }
1.54 albertel 850: if ($primaryLibServer=~/[^\w\-.]/) { push(@error,"Primary library server ID $primaryLibServer contains special characters"); }
1.43 raeburn 851: }
852:
853:
1.54 albertel 854: if (@error) { print "\n*** ERRORS: \n\t".join("\n\t",@error)."\n"; }
1.6 harris41 855: print(<<END);
1.65 raeburn 856: ENTER A CHOICE OF 1-13 TO CHANGE, otherwise ENTER 14:
1.1 harris41 857: END
1.5 harris41 858: my $choice=<>;
859: chomp($choice);
1.6 harris41 860: if ($choice==1) {
861: print(<<END);
1.16 harris41 862: 1) Domain Name: $perlvar{'lonDefDomain'}
1.20 albertel 863: ENTER NEW VALUE (this is an internal value used to identify a group of
864: LON-CAPA machines, it must be alphanumerical, we suggest
865: using a part of your actual DNS domain. For example, for
866: the machine loncapa.msu.edu, we set the Domain to msu):
1.6 harris41 867: END
868: my $choice2=<>;
869: chomp($choice2);
1.8 harris41 870: $perlvar{'lonDefDomain'}=$choice2;
1.6 harris41 871: }
872: elsif ($choice==2) {
873: print(<<END);
1.20 albertel 874: 2) Domain Description: $domainDescription
875: ENTER NEW VALUE (this should be a string that describes your domain, spaces
876: and punctuation are fine except for ':'):
877: END
878: my $choice2=<>;
879: chomp($choice2);
880: $domainDescription=$choice2;
881: }
882: elsif ($choice==3) {
883: print(<<END);
884: 3) Machine Name: $perlvar{'lonHostID'}
885: ENTER NEW VALUE (this will be the name of the machine in the LON-CAPA network
886: it cannot contain any of '_' '-' '.' or ':'. We suggest that
887: if you are in the domain 'example' and are the first library
888: server you enter 'examplel1') :
1.6 harris41 889: END
890: my $choice2=<>;
891: chomp($choice2);
1.8 harris41 892: $perlvar{'lonHostID'}=$choice2;
1.6 harris41 893: }
1.20 albertel 894: elsif ($choice==4) {
1.6 harris41 895: print(<<END);
1.43 raeburn 896: 4) ID of primary library server for domain: $primaryLibServer
897: ENTER NEW VALUE (this will be the LON-CAPA Machine ID of a library server in
898: your domain; it cannot contain any of '_' '-' '.' or ':'.
899: This server will be where domain data which are not
900: associated with any specific home library server
901: will be stored (e.g., e-mail broadcast by Domain Coordinators
902: to users in the domain).
903: END
904: my $choice2=<>;
905: chomp($choice2);
906: $primaryLibServer=$choice2;
907: }
908: elsif ($choice==5) {
909: print(<<END);
1.47 albertel 910: 5) Server Administrator's E-mail Address: $perlvar{'lonAdmEMail'}
1.6 harris41 911: ENTER NEW VALUE:
912: END
913: my $choice2=<>;
914: chomp($choice2);
1.9 harris41 915: $perlvar{'lonAdmEMail'}=$choice2;
1.6 harris41 916: }
1.43 raeburn 917: elsif ($choice==6) {
1.6 harris41 918: print(<<END);
1.43 raeburn 919: 6) Support E-mail Address: $perlvar{'lonSupportEMail'}
1.32 raeburn 920: ENTER NEW VALUE:
921: END
922: my $choice2=<>;
923: chomp($choice2);
924: $perlvar{'lonSupportEMail'}=$choice2;
925: }
1.43 raeburn 926: elsif ($choice==7) {
1.32 raeburn 927: print(<<END);
1.60 raeburn 928: 7) Server Protocol (http or https):
929: ENTER NEW VALUE: (this should be either 'http' or 'https'
930: if in doubt set to 'http'):
931: END
932: my $choice2=<>;
933: chomp($choice2);
934: $protocol=$choice2;
935: }
936: elsif ($choice==8) {
937: print(<<END);
1.65 raeburn 938: 8) Internet Domain Name of Institution
939: ENTER NEW VALUE:
940:
941: END
942: my $choice2=<>;
943: chomp($choice2);
944: $intdom=$choice2;
945: }
946: elsif ($choice==9) {
947: print(<<END);
948: 9) Role: $perlvar{'lonRole'}
1.20 albertel 949: ENTER NEW VALUE (this should be either 'access' or 'library'
950: if in doubt select 'library'):
1.6 harris41 951: END
952: my $choice2=<>;
953: chomp($choice2);
954: $perlvar{'lonRole'}=$choice2;
955: }
1.65 raeburn 956: elsif ($choice==10) {
1.6 harris41 957: print(<<END);
1.65 raeburn 958: 10) Cache Expiration Time: $perlvar{'lonExpire'}
1.20 albertel 959: ENTER NEW VALUE (in seconds, 86400 is a reasonable value):
1.6 harris41 960: END
961: my $choice2=<>;
962: chomp($choice2);
963: $perlvar{'lonExpire'}=$choice2;
964: }
1.65 raeburn 965: elsif ($choice==11) {
1.6 harris41 966: print(<<END);
1.65 raeburn 967: 11) Server Load: $perlvar{'lonLoadLim'}
1.6 harris41 968: ENTER NEW VALUE:
969: END
970: my $choice2=<>;
971: chomp($choice2);
972: $perlvar{'lonLoadLim'}=$choice2;
973: }
1.65 raeburn 974: elsif ($choice==12) {
1.25 albertel 975: print(<<END);
1.65 raeburn 976: 12) User Load: $perlvar{'lonUserLoadLim'}
1.25 albertel 977: Numer of users that can login before machine is 'overloaded'
1.26 albertel 978: ENTER NEW VALUE (integer value, 0 means there is no limit):
1.25 albertel 979: END
980: my $choice2=<>;
981: chomp($choice2);
982: $perlvar{'lonUserLoadLim'}=$choice2;
983: }
1.65 raeburn 984: elsif ($choice==13) {
1.31 albertel 985: print(<<END);
1.65 raeburn 986: 13) Allow only secure connections: $securestatus
1.31 albertel 987: The Lon-CAPA communication daemons lonc and lond can be configured to
988: allow only secure connections by default.
989:
990: POSSIBLE CHOICES:
991: 1) allow only secure connections and don't connect to machines that
992: can not be connected to securely
993: 2) allow only secure connections but allow this machine to connect to
994: machines that don't support secure connections
995: 3) allow insecure connections to this machine but only allow connections
996: to machines that support secure connections
997: 4) allow insecure connections
998: ENTER NEW VALUE (currenly $securenum):
999: END
1000: my $choice2=<>;
1001: chomp($choice2);
1002: if ($choice2 eq '1') {
1003: $perlvar{'loncAllowInsecure'}=0;$perlvar{'londAllowInsecure'}=0;
1004: } elsif ($choice2 eq '2') {
1005: $perlvar{'loncAllowInsecure'}=0;$perlvar{'londAllowInsecure'}=1;
1006: } elsif ($choice2 eq '3') {
1007: $perlvar{'loncAllowInsecure'}=1;$perlvar{'londAllowInsecure'}=0;
1008: } elsif ($choice2 eq '4') {
1009: $perlvar{'loncAllowInsecure'}=1;$perlvar{'londAllowInsecure'}=1;
1010: }
1011: ($securestatus,$securenum)=&securesetting(%perlvar);
1012: }
1.82 ! raeburn 1013: elsif (($choice==14) && (!@error)) {
1.6 harris41 1014: $flag=1;
1015: }
1016: else {
1.38 www 1017: print "Invalid input.\n";
1.6 harris41 1018: }
1019: }
1.7 harris41 1020: open(OUT,">$confdir$filename") or
1021: die("Cannot output to $confdir$filename\n");
1022: foreach my $key (keys %perlvar) {
1023: my $value=$perlvar{$key};
1.49 raeburn 1024: my $line = "PerlSetVar $key $value";
1025: if ($value eq '') {
1026: $line = '#'.$line;
1027: }
1.8 harris41 1028: print(OUT <<END) unless $perlvarstatic{$key};
1.49 raeburn 1029: $line
1.7 harris41 1030: END
1031: }
1032: close(OUT);
1.1 harris41 1033: </perlscript>
1034: </file>
1035: <file>
1036: <target dist='default'>loncom/hosts.tab</target>
1037: <perlscript mode='fg'>
1038: unless (-l "<TARGET />") {
1.36 albertel 1039: my $hostname=`hostname -f`;chomp($hostname);
1.82 ! raeburn 1040: my $date=`date -I`; chomp($date);
! 1041: my $lonHostID=$perlvar{'lonHostID'};
1.51 albertel 1042: $lonHostID=~s/[^\w\-.]//g;
1.82 ! raeburn 1043: my $lineexistflag=0;
! 1044: my $hostidexistflag=0;
! 1045: my $line2insert=<<END;
1.65 raeburn 1046: $perlvar{'lonHostID'}:$perlvar{'lonDefDomain'}:$perlvar{'lonRole'}:$hostname:$protocol:$intdom
1.15 harris41 1047: END
1.57 albertel 1048: if (!$domainTabExtras) {
1049: $domainTabExtras=':::::';
1050: }
1.82 ! raeburn 1051: my $domaininsert="$perlvar{'lonDefDomain'}:$domainDescription:$domainTabExtras:$primaryLibServer\n";
1.23 albertel 1052: if ($lonCluster eq 'standalone') {
1053: open(OUT,'>../'.$lonCluster.'_hosts.tab') or
1054: die('file generation error');
1055: print(OUT $line2insert);
1.60 raeburn 1056: print OUT ("^$hostname:$protocol\n");
1.52 albertel 1057: close(OUT);
1058: open(OUT,'>../'.$lonCluster.'_dns_hosts.tab') or
1059: die('file generation error');
1060: print(OUT $line2insert);
1.23 albertel 1061: close(OUT);
1.27 albertel 1062: open(OUT,'>../'.$lonCluster.'_domain.tab') or
1063: die('file generation error');
1064: print(OUT $domaininsert);
1065: close(OUT);
1.52 albertel 1066: open(OUT,'>../'.$lonCluster.'_dns_domain.tab') or
1067: die('file generation error');
1068: print(OUT $domaininsert);
1069: close(OUT);
1.23 albertel 1070: }
1.15 harris41 1071: if ($flag==1) {
1.6 harris41 1072: `rm -f ../hosts.tab`;
1.52 albertel 1073: `rm -f ../dns_hosts.tab`;
1074: `ln -s ${lonCluster}_dns_hosts.tab ../dns_hosts.tab`;
1075: open(IN,'<../'.$lonCluster.'_dns_hosts.tab');
1076: while(my $line = <IN>) {
1077: if ($line =~ /^\Q$line2insert\E$/) {
1.13 harris41 1078: $lineexistflag=1;
1079: }
1.52 albertel 1080: if ($line =~ /^\Q$lonHostID\E\:/) {
1.13 harris41 1081: $hostidexistflag=1;
1082: }
1083: }
1084: close(IN);
1085: if ($hostidexistflag and !$lineexistflag) {
1086: print <<END;
1087: WARNING: $lonHostID already exists inside
1.52 albertel 1088: loncapa/loncom/${lonCluster}_dns_hosts.tab. The entry inside
1089: ${lonCluster}_dns_hosts.tab does not match your settings.
1090: An entry inside ${lonCluster}_hosts.tab will be made
1.13 harris41 1091: with your new values.
1092: END
1.15 harris41 1093: `grep -v "$lonHostID:" ../${lonCluster}_hosts.tab > ../new_${lonCluster}_hosts.tab`;
1094: open(OUT,'>>../new_'.$lonCluster.'_hosts.tab') or
1095: die("cannot open loncom/${lonCluster}_hosts.tab for output\n");
1.14 harris41 1096: print(OUT $line2insert);
1.13 harris41 1097: close(OUT);
1.15 harris41 1098: `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
1.13 harris41 1099: # email appropriate message
1.65 raeburn 1100: `echo "REPLACE:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "REPLACE:$lonCluster:$lonHostID:$protocol:$intdom:$date" installrecord\@mail.lon-capa.org`;
1.13 harris41 1101: }
1102: elsif ($hostidexistflag and $lineexistflag) {
1.15 harris41 1103: print <<END;
1.52 albertel 1104: Entry exists in ${lonCluster}_dns_hosts.tab. Making duplicate entry in ${lonCluster}_hosts.tab
1.15 harris41 1105: END
1.52 albertel 1106: `grep -v "$lonHostID:" ../${lonCluster}_hosts.tab > ../new_${lonCluster}_hosts.tab`;
1107: open(OUT,'>>../new_'.$lonCluster.'_hosts.tab') or
1108: die("cannot open loncom/${lonCluster}_hosts.tab for output\n");
1109: print(OUT $line2insert);
1110: close(OUT);
1111: `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
1.15 harris41 1112: # email appropriate message
1.65 raeburn 1113: `echo "STABLEUPDATE:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "STABLEUPDATE:$lonCluster:$lonHostID:$protocol:$intdom:$date" installrecord\@mail.lon-capa.org`;
1.13 harris41 1114: }
1.15 harris41 1115: elsif (!$hostidexistflag and !$lineexistflag) {
1116: print <<END;
1117: New entry for $lonCluster.
1.6 harris41 1118: END
1.15 harris41 1119: `cat ../${lonCluster}_hosts.tab > ../new_${lonCluster}_hosts.tab`;
1.21 albertel 1120: open(OUT,'>>../new_'.$lonCluster.'_hosts.tab') or
1121: die("cannot open loncom/new_${lonCluster}_hosts.tab for output\n");
1.15 harris41 1122: print(OUT $line2insert);
1123: close(OUT);
1124: `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
1125: # email appropriate message
1.65 raeburn 1126: `echo "INSERT:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "INSERT:$lonCluster:$lonHostID:$protocol:$intdom:$date" installrecord\@mail.lon-capa.org`;
1.27 albertel 1127: }
1128: }
1129: $lineexistflag=0;
1.82 ! raeburn 1130: my $domainexistflag=0;
1.27 albertel 1131: if ($flag==1) {
1132: `rm -f ../domain.tab`;
1.52 albertel 1133: `rm -f ../dns_domain.tab`;
1134: `ln -s ${lonCluster}_dns_domain.tab ../dns_domain.tab`;
1135: open(IN,'<../'.$lonCluster.'_dns_domain.tab');
1136: while(my $line = <IN>) {
1137: if ($line =~/^\Q$domaininsert\E$/) {
1.27 albertel 1138: $lineexistflag=1;
1139: }
1.52 albertel 1140: if ($line =~/^\Q$perlvar{'lonDefDomain'}\E\:/) {
1.27 albertel 1141: $domainexistflag=1;
1142: }
1143: }
1144: close(IN);
1145: if ($domainexistflag and !$lineexistflag) {
1146: print <<END;
1147: WARNING: $perlvar{'lonDefDomain'} already exists inside
1.52 albertel 1148: loncapa/loncom/${lonCluster}_dns_domain.tab. The entry inside
1149: ${lonCluster}_dns_domain.tab does not match your settings.
1150: An entry will be made in inside ${lonCluster}_domain.tab
1.27 albertel 1151: with your new values.
1152: END
1153: `grep -v "$perlvar{'lonDefDomain'}:" ../${lonCluster}_domain.tab > ../new_${lonCluster}_domain.tab`;
1154: open(OUT,'>>../new_'.$lonCluster.'_domain.tab') or
1155: die("cannot open loncom/${lonCluster}_domain.tab for output\n");
1156: print(OUT $domaininsert);
1157: close(OUT);
1158: `ln -s new_${lonCluster}_domain.tab ../domain.tab`;
1159: # email appropriate message
1.82 ! raeburn 1160: `echo "REPLACEdom:$lonCluster:$lonHostID:$date:$domaininsert" | mail -s "REPLACEdom:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
1.27 albertel 1161: }
1162: elsif ($domainexistflag and $lineexistflag) {
1.52 albertel 1163: `grep -v "$perlvar{'lonDefDomain'}:" ../${lonCluster}_domain.tab > ../new_${lonCluster}_domain.tab`;
1164: open(OUT,'>>../new_'.$lonCluster.'_domain.tab') or
1165: die("cannot open loncom/${lonCluster}_domain.tab for output\n");
1166: print(OUT $domaininsert);
1167: close(OUT);
1.27 albertel 1168: print <<END;
1.52 albertel 1169: Entry exists in ${lonCluster}_dns_domain.tab. Making duplicate entry in ${lonCluster}_domain.tab
1.27 albertel 1170: END
1.52 albertel 1171: `ln -s new_${lonCluster}_domain.tab ../domain.tab`;
1.27 albertel 1172: # email appropriate message
1173: `echo "STABLEUPDATEdom:$lonCluster:$lonHostID:$date:$domaininsert" | mail -s "STABLEUPDATEdom:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
1174: }
1175: elsif (!$domainexistflag and !$lineexistflag) {
1176: print <<END;
1177: New entry for $lonCluster.
1178: END
1179: `cat ../${lonCluster}_domain.tab > ../new_${lonCluster}_domain.tab`;
1180: open(OUT,'>>../new_'.$lonCluster.'_domain.tab') or
1181: die("cannot open loncom/new_${lonCluster}_domain.tab for output\n");
1182: print(OUT $domaininsert);
1183: close(OUT);
1184: `ln -s new_${lonCluster}_domain.tab ../domain.tab`;
1185: # email appropriate message
1186: `echo "INSERTdom:$lonCluster:$lonHostID:$date:$domaininsert" | mail -s "INSERTdom:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
1.6 harris41 1187: }
1188: }
1.1 harris41 1189: }
1190: </perlscript>
1191: </file>
1192: </files>
1193: </piml>
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/back.gif){kind=icon}
Return to updatequery.piml CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [LON-CAPA] / doc / loncapafiles