1: <!-- updatequery.piml -->
2:
3: <!-- $Id: updatequery.piml,v 1.40 2005/08/02 21:25:43 albertel Exp $ -->
4:
5: <!--
6:
7: This file is part of the LearningOnline Network with CAPA (LON-CAPA).
8:
9: LON-CAPA is free software; you can redistribute it and/or modify
10: it under the terms of the GNU General Public License as published by
11: the Free Software Foundation; either version 2 of the License, or
12: (at your option) any later version.
13:
14: LON-CAPA is distributed in the hope that it will be useful,
15: but WITHOUT ANY WARRANTY; without even the implied warranty of
16: MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17: GNU General Public License for more details.
18:
19: You should have received a copy of the GNU General Public License
20: along with LON-CAPA; if not, write to the Free Software
21: Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22:
23: /home/httpd/html/adm/gpl.txt
24:
25: http://www.lon-capa.org/
26:
27: -->
28:
29: <piml>
30: <targetroot>/</targetroot>
31: <files>
32: <file>
33: <target dist='default'>/</target>
34: <perlscript mode='fg'>
35: $|=1;
36: print(<<END);
37:
38:
39: *********************************************
40: *********************************************
41: **** ****
42: **** LON-CAPA SYSTEM INFORMATION REQUEST ****
43: **** ****
44: **** Please respond to the choices below ****
45: **** ****
46: *********************************************
47: *********************************************
48:
49: END
50: sleep(3);
51: </perlscript>
52: </file>
53: <file>
54: <target dist='default'>loncom/hosts.tab</target>
55: <perlscript mode='fg'>
56: unless (-l "<TARGET />") {
57: print(<<END);
58:
59: ===============================================================================
60: Which cluster option would you like to have installed?
61: IMPORTANT: to take advantage of the cluster options 1) and 3),
62: you must contact lon-capa\@lon-capa.org.
63:
64: 1) PRODUCTION - you want to eventually connect this machine to the
65: LON-CAPA content sharing network. This setting is for
66: schools, colleges, and universities, that currently
67: are running - or in the future will run - courses
68: 2) STAND-ALONE - you want this machine to run in 'stand-alone' mode and
69: not be connected to other LON-CAPA machines for now
70: 3) DEVELOPMENT - you want to do software (not content!) development with
71: this workstation and eventually link it with the
72: workstations of other LON-CAPA software developers.
73: 4) RUNNING YOUR OWN CLUSTER - this machine is not in the standard LON-CAPA
74: clusters and won't be in the future and you want the existing
75: hosts.tab and domain.tab files to be left alone.
76: (This choice is unlikely what you want to select.)
77: END
78: # Option number 26 will install rawhide_hosts.tab, but
79: # the typical user does not want to be part of an intensive
80: # machine test cluster.
81:
82: # get input
83: # if valid then process, otherwise loop
84: $flag=0;
85: while (!$flag) {
86: print "ENTER 1, 2, 3, or 4:\n";
87: my $choice=<>;
88: chomp($choice);
89: if ($choice==1) {
90: $lonCluster='production'; $flag=1;
91: }
92: elsif ($choice==2) {
93: $lonCluster='standalone'; $flag=1;
94: }
95: elsif ($choice==3) {
96: $lonCluster='development'; $flag=1;
97: }
98: elsif ($choice==4) {
99: $lonCluster='existing'; $flag=1;
100: if (-e '/home/httpd/lonTabs/hosts.tab') {
101: `cp /home/httpd/lonTabs/hosts.tab ../existing_hosts.tab`;
102: }
103: else {
104: print <<END;
105: There is no existing /home/httpd/lonTabs/hosts.tab
106: END
107: die('');
108: }
109: if (-e '/home/httpd/lonTabs/domain.tab') {
110: `cp /home/httpd/lonTabs/domain.tab ../existing_domain.tab`;
111: }
112: else {
113: print <<END;
114: There is no existing /home/httpd/lonTabs/domain.tab
115: END
116: die('');
117: }
118: }
119: elsif ($choice==26) {
120: $lonCluster='rawhide'; $flag=1;
121: }
122: }
123: }
124: </perlscript>
125: </file>
126: <file>
127: <target dist='default'>/home/httpd/lonTabs/hosts.tab</target>
128: <perlscript mode='fg'>
129: $|=1;
130: my $domainDescription;
131: my $domainTabExtras;
132: unless (-e "<TARGET />") {
133: print(<<END);
134: WELCOME TO LON-CAPA!
135:
136: If you have questions, please visit http://install.lon-capa.org
137: or contact helpdesk\@lon-capa.org.
138:
139: ===============================================================================
140: The following 4 values are needed to configure LON-CAPA:
141: * Machine Role
142: * LON-CAPA Domain Name
143: * LON-CAPA Machine ID Name, and
144: * System Administration E-mail Address.
145: ===============================================================================
146:
147: In addition, a Support E-mail Address can also be included. If
148: an address is included then one of the options in the LON-CAPA
149: help menu will be a link to a form that a user will complete to
150: request LON-CAPA help.
151:
152: END
153:
154: open(OUT,'>/tmp/loncapa_updatequery.out');
155: close(OUT);
156:
157: # query for Machine Role
158: print(<<END);
159: **** Machine Role ****
160: Library server (recommended if first-time installation of LON-CAPA):
161: Servers that are repositories of authoritative educational resources.
162: These servers also provide the construction space by which instructors
163: assemble their classroom online material.
164: Access server:
165: Servers that load-balance high-traffic delivery of educational resources
166: over the world-wide web.
167: 1) Will this be a library server? (recommended if this is your first install)
168: 2) Or, will this be an access server?
169: END
170: my $flag=0;
171: my $r='';
172: my $lonRole;
173: while (!$flag) {
174: print "ENTER A CHOICE OF 1 or 2:\n";
175: my $choice=<>;
176: chomp($choice);
177: if ($choice==1) {
178: open(OUT,'>>/tmp/loncapa_updatequery.out');
179: print(OUT 'lonRole'."\t".'library'."\n");
180: close(OUT);
181: $lonRole='library';
182: $r='l';
183: $flag=1;
184: }
185: elsif ($choice==2) {
186: open(OUT,'>>/tmp/loncapa_updatequery.out');
187: print(OUT 'lonRole'."\t".'access'."\n");
188: close(OUT);
189: $lonRole='access';
190: $r='a';
191: $flag=2;
192: }
193: else {
194:
195: }
196: }
197:
198: # need to recommend a machine ID name (ipdomain.l.somenumber)
199: my $hostname=`hostname -f`; chomp($hostname);
200: my $ipdomain='';
201: if ($hostname=~/([^\.]*)\.([^\.]*)$/) {
202: $ipdomain=$1;
203: }
204:
205: print(<<END);
206:
207: **** Domain ****
208: [this does NOT need to correspond to internet address domains,
209: good examples might be "msu" or "bionet" or "vermontcc",
210: bad examples are "physics" (too general)
211: or "michiganstateuniversity" (too long)
212: or "msuedu" (internet domain, just make it "msu")
213: or "msuphysics" (only if there is a good reason to limit)
214: or "mydomain" (what is that?)
215: Please make this name short AND descriptive of your organization.
216: Note that the domain is very hard to change later.
217: Double-check with the LON-CAPA group at MSU if this domain is
218: going to be part of the main production cluster, since it needs
219: to be unique.]
220: END
221:
222: # get domain name
223: # accept if valid, if not valid, tell user and repeat
224: $flag=0;
225: my $lonDefDomain;
226: while (!$flag) {
227: if ($ipdomain) {
228: print(<<END);
229: ENTER LONCAPA DOMAIN [$ipdomain]:
230: END
231: }
232: else {
233: print(<<END);
234: ENTER LONCAPA DOMAIN:
235: END
236: }
237: my $choice=<>;
238: chomp($choice);
239: my $bad_domain_flag=0;
240: my @bad_domain_names=('res','raw','userfiles','priv','adm','uploaded');
241: foreach my $bad (@bad_domain_names) {
242: $bad_domain_flag=1 if $choice eq $bad;
243: }
244: if ($choice=~/capa/i) {
245: $bad_domain_flag=1;
246: }
247: if ($ipdomain and $choice=~/^\s*$/) {
248: $choice=$ipdomain;
249: open(OUT,'>>/tmp/loncapa_updatequery.out');
250: print(OUT 'lonDefDomain'."\t".$choice."\n");
251: close(OUT);
252: $lonDefDomain=$choice;
253: $flag=1;
254: } elsif (length($choice)>12) {
255: print "Name too long\n";
256: } elsif (length($choice)<2) {
257: print "Name too short\n";
258: } elsif ($bad_domain_flag) {
259: print "Invalid input ('$choice' conflicts with LON-CAPA namespace).\n";
260: print "Please try something different than '$choice'\n";
261: } elsif ($choice!~/\_/ and $choice=~/^\w+$/) {
262: open(OUT,'>>/tmp/loncapa_updatequery.out');
263: print(OUT 'lonDefDomain'."\t".$choice."\n");
264: close(OUT);
265: $lonDefDomain=$choice;
266: $r='l';
267: $flag=1;
268: } else {
269: print "Invalid input (only alphanumeric characters supported).\n";
270: }
271: }
272:
273:
274: # get domain description
275: # accept if valid, if not valid, tell user and repeat
276: $flag=0;
277:
278: while (!$flag) {
279: print(<<END);
280:
281: **** Domain Description ****
282: String describing the domain, to be shown to users.
283: [Example, msu is Michigan State University]
284: ENTER DOMAIN DESCRIPTION:
285: END
286:
287: my $choice=<>;
288: chomp($choice);
289: if ($choice!~/:/) {
290: open(OUT,'>>/tmp/loncapa_updatequery.out');
291: print(OUT 'domainDescription'."\t".$choice."\n");
292: close(OUT);
293: $domainDescription=$choice;
294: $flag=1;
295: }
296: else {
297: print "Invalid input (no ':' allowed).\n";
298: }
299: }
300:
301: my $lonHostID;
302: if ($lonDefDomain) {
303: $lonHostID=$lonDefDomain.$r.int(1+rand(9)); # should be probably also detect
304: # against the hosts.tab
305: }
306:
307: print(<<END);
308:
309: **** Machine ID Name ****
310: [this does NOT need to correspond to internet address names;
311: this name MUST be unique to the whole LON-CAPA network;
312: we recommend that you use a name based off of your institution;
313: good examples: "msul1" or "bioneta2";
314: bad examples: "loncapabox" or "studentsinside".
315: Note that machine names are very hard to change later.]
316: END
317: # get machine name
318: # accept if valid, if not valid, tell user and repeat
319: $flag=0;
320: while (!$flag) {
321: if ($ipdomain) {
322: print(<<END);
323: ENTER LONCAPA MACHINE ID [$lonHostID]:
324: END
325: }
326: else {
327: print(<<END);
328: ENTER LONCAPA MACHINE ID:
329: END
330: }
331: my $choice=<>;
332: chomp($choice);
333: if ($choice=~/capa/i) {
334: print "Invalid input (names containing 'capa' are reserved).\n";
335: } elsif ($lonHostID and $choice=~/^\s*$/) {
336: $choice=$lonHostID;
337: open(OUT,'>>/tmp/loncapa_updatequery.out');
338: print(OUT 'lonHostID'."\t".$choice."\n");
339: close(OUT);
340: $lonHostID=$choice;
341: $flag=1;
342: } elsif (length($choice)>15) {
343: print "Name too long\n";
344: } elsif (length($choice)<4) {
345: print "Name too short\n";
346: } elsif ($choice!~/\_/ and $choice=~/^\w+$/) {
347: open(OUT,'>>/tmp/loncapa_updatequery.out');
348: print(OUT 'lonHostID'."\t".$choice."\n");
349: close(OUT);
350: $lonHostID=$choice;
351: $flag=1;
352: } else {
353: print "Invalid input (only alphanumeric characters supported).\n";
354: }
355: }
356:
357: # get admin e-mail address
358: # accept if valid, if not valid, tell user and repeat
359: $flag=0;
360: my $lonAdmEMail;
361: while (!$flag) {
362: print(<<END);
363:
364: **** System Administrator's E-mail ****
365: E-mail address of the person who will manage this machine
366: [should be in the form somebody\@somewhere]
367: ENTER ADMIN E-MAIL ADDRESS:
368: END
369:
370: my $choice=<>;
371: chomp($choice);
372: if ($choice=~/\@/) {
373: open(OUT,'>>/tmp/loncapa_updatequery.out');
374: print(OUT 'lonAdmEMail'."\t".$choice."\n");
375: close(OUT);
376: $lonAdmEMail=$choice;
377: $flag=1;
378: }
379: else {
380: print "Invalid input (this needs to look like an e-mail address!).\n";
381: }
382: }
383:
384:
385: # get support e-mail address
386: # accept if valid, if not valid, tell user and repeat
387: $flag=0;
388: my $lonSupportEMail;
389: while (!$flag) {
390: print(<<END);
391:
392: **** Support E-mail ****
393: E-mail address of the person who will receive
394: help requests from LON-CAPA users who access
395: the system via this server. If the address is left blank,
396: then a help support form will not be displayed
397: as part of the help menu.
398: [should be in the form somebody\@somewhere]
399: ENTER SUPPORT E-MAIL ADDRESS:
400: END
401:
402: my $choice=<>;
403: chomp($choice);
404: $choice =~ s/\s//g;
405: if ( ($choice=~/\@/) || $choice eq '') {
406: open(OUT,'>>/tmp/loncapa_updatequery.out');
407: print(OUT 'lonSupportEMail'."\t".$choice."\n");
408: close(OUT);
409: $lonSupportEMail=$choice;
410: $flag=1;
411: }
412: else {
413: print "Invalid input (this either needs to be blank, or look like an e-mail address!).\n";
414: }
415: }
416:
417:
418: # update loncapa.conf
419: my $confdir='/etc/httpd/conf/';
420: #my $confdir='';
421: my $filename='loncapa.conf';
422: my %perlvar;
423: if (-e "$confdir$filename") {
424: open(CONFIG,'<'.$confdir.$filename) or die("Can't read $confdir$filename");
425: while (my $configline=<CONFIG>) {
426: if ($configline =~ /^[^\#]*PerlSetVar/) {
427: my ($unused,$varname,$varvalue)=split(/\s+/,$configline);
428: chomp($varvalue);
429: $perlvar{$varname}=$varvalue if $varvalue!~/^\{\[\[\[\[/;
430: }
431: }
432: close(CONFIG);
433: }
434: $perlvar{'lonHostID'}=$lonHostID;
435: $perlvar{'lonDefDomain'}=$lonDefDomain;
436: $perlvar{'lonAdmEMail'}=$lonAdmEMail;
437: $perlvar{'lonSupportEMail'}=$lonSupportEMail;
438: $perlvar{'lonRole'}=$lonRole;
439: unless ($perlvar{'lonLoadLim'} and $perlvar{'lonLoadLim'}!~/\{\[\[\[\[/) {
440: $perlvar{'lonLoadLim'}='2.00';
441: }
442: unless ($perlvar{'lonUserLoadLim'} and $perlvar{'lonUserLoadLim'}!~/\{\[\[\[\[/) {
443: $perlvar{'lonUserLoadLim'}='0';
444: }
445: unless ($perlvar{'lonExpire'} and $perlvar{'lonExpire'}!~/\{\[\[\[\[/) {
446: $perlvar{'lonExpire'}='86400';
447: }
448: unless ($perlvar{'lonReceipt'} and $perlvar{'lonReceipt'}!~/\{\[\[\[\[/) {
449: my $lonReceipt='';
450: srand(time ^ $$ ^ unpack "%L*", `ps axww | gzip`);
451: my @alnum=(0..9,a..z);
452: foreach my $i (1..20) {
453: $lonReceipt.=$alnum[int(rand(36))];
454: }
455: $perlvar{'lonReceipt'}=$lonReceipt;
456: }
457: open(OUT,">$confdir$filename") or
458: die("Cannot output to $confdir$filename\n");
459: foreach my $key (keys %perlvar) {
460: my $value=$perlvar{$key};
461: print(OUT <<END);
462: PerlSetVar $key $value
463: END
464: }
465: close(OUT);
466: }
467: </perlscript>
468: </file>
469: <file>
470: <target dist='default'>/</target>
471: <perlscript mode='fg'>
472: sub securesetting {
473: my (%perlvar)=@_;
474: my $securestatus='unknown';
475: my $securenum='';
476: if ( $perlvar{'loncAllowInsecure'}&& $perlvar{'londAllowInsecure'}) {
477: $securestatus='no'; $securenum='4';
478: } elsif ( $perlvar{'loncAllowInsecure'}&& !$perlvar{'londAllowInsecure'}) {
479: $securestatus='lond'; $securenum='3';
480: } elsif (!$perlvar{'loncAllowInsecure'}&& $perlvar{'londAllowInsecure'}) {
481: $securestatus='lonc'; $securenum='2';
482: } elsif (!$perlvar{'loncAllowInsecure'}&& !$perlvar{'londAllowInsecure'}) {
483: $securestatus='yes (lond and lonc)'; $securenum='1';
484: }
485: return ($securestatus,$securenum);
486: }
487: # read values from loncapa.conf
488: my $confdir='/etc/httpd/conf/';
489: my $filename='loncapa.conf';
490: my %perlvar;
491: my ($securestatus,$securenum);
492: if (-e "$confdir$filename") {
493: open(CONFIG,'<'.$confdir.$filename) or
494: die("Can't read $confdir$filename");
495: while (my $configline=<CONFIG>) {
496: if ($configline =~ /^[^\#]*PerlSetVar/) {
497: my ($unused,$varname,$varvalue)=split(/\s+/,$configline);
498: chomp($varvalue);
499: $perlvar{$varname}=$varvalue;
500: }
501: }
502: close(CONFIG);
503: }
504: unless ($perlvar{'lonLoadLim'} and $perlvar{'lonLoadLim'}!~/\{\[\[\[\[/) {
505: $perlvar{'lonLoadLim'}='2.00';
506: }
507: unless ($perlvar{'lonUserLoadLim'} and $perlvar{'lonUserLoadLim'}!~/\{\[\[\[\[/) {
508: $perlvar{'lonUserLoadLim'}='0';
509: }
510: unless ($perlvar{'lonExpire'} and $perlvar{'lonExpire'}!~/\{\[\[\[\[/) {
511: $perlvar{'lonExpire'}='86400';
512: }
513: unless ($perlvar{'londAllowInsecure'} and $perlvar{'londAllowInsecure'}!~/\{\[\[\[\[/) {
514: $perlvar{'londAllowInsecure'}='1';
515: }
516: unless ($perlvar{'loncAllowInsecure'} and $perlvar{'loncAllowInsecure'}!~/\{\[\[\[\[/) {
517: $perlvar{'loncAllowInsecure'}='1';
518: }
519: ($securestatus,$securenum)=&securesetting(%perlvar);
520: unless ($perlvar{'lonReceipt'} and $perlvar{'lonReceipt'}!~/\{\[\[\[\[/) {
521: my $lonReceipt='';
522: srand(time ^ $$ ^ unpack "%L*", `ps axww | gzip`);
523: my @alnum=(0..9,a..z);
524: foreach my $i (1..20) {
525: $lonReceipt.=$alnum[int(rand(36))];
526: }
527: $perlvar{'lonReceipt'}=$lonReceipt;
528: }
529: my %perlvarstatic;
530: if (-e "${confdir}loncapa_apache.conf") {
531: open(CONFIG,'<'.$confdir.'loncapa_apache.conf') or
532: die("Can't read ${confdir}loncapa_apache.conf");
533: while (my $configline=<CONFIG>) {
534: if ($configline =~ /^[^\#]*PerlSetVar/) {
535: my ($unused,$varname,$varvalue)=split(/\s+/,$configline);
536: chomp($varvalue);
537: $perlvarstatic{$varname}=$varvalue;
538: }
539: }
540: close(CONFIG);
541: }
542: if (!$domainDescription && $lonCluster ne 'existing') {
543: open(IN,'<../'.$lonCluster.'_domain.tab');
544: while(<IN>) {
545: if (/^$perlvar{'lonDefDomain'}\:/) {
546: (undef,$domainDescription,$domainTabExtras)=split(/:/,$_,3);
547: chomp($domainDescription);
548: chomp($domainTabExtras);
549: last;
550: }
551: }
552: close(IN);
553: }
554: if (!$domainDescription) {
555: open(IN,'</home/httpd/lonTabs/domain.tab');
556: while(<IN>) {
557: if (/^$perlvar{'lonDefDomain'}\:/) {
558: (undef,$domainDescription,$domainTabExtras)=split(/:/,$_,3);
559: chomp($domainDescription);
560: chomp($domainTabExtras);
561: last;
562: }
563: }
564: close(IN);
565: }
566:
567: # implement editing logic below, interactively
568: # update loncapa.conf until 8 is entered
569:
570: $flag=0;
571:
572: while (!$flag) {
573: print(<<END);
574:
575: ===============================================================================
576: This is now the current configuration of your machine.
577: 1) Domain Name: $perlvar{'lonDefDomain'}
578: 2) Domain Description: $domainDescription
579: 3) Machine Name: $perlvar{'lonHostID'}
580: 4) System Administrator's E-mail Address: $perlvar{'lonAdmEMail'}
581: 5) Support E-mail Address: $perlvar{'lonSupportEMail'}
582: 6) Role: $perlvar{'lonRole'}
583: 7) Cache Expiration Time: $perlvar{'lonExpire'}
584: 8) Server Load: $perlvar{'lonLoadLim'}
585: 9) User Load: $perlvar{'lonUserLoadLim'}
586: 10) Allow only secure connections: $securestatus
587: 11) Everything is correct up above
588: END
589:
590: my $error='';
591: foreach my $v ($perlvar{'lonDefDomain'},$perlvar{'lonHostID'}) {
592: if (length($v)>16) { $error.="\nName $v too long"; }
593: if (length($v)<2) { $error.="\nName $v too short"; }
594: if ($v=~/capa/i) {
595: if ($v!~/^oucapa\d+$/ &&
596: ($v!~/^capa\d+$/ && $perlvar{'lonDefDomain'} eq 'uwsp')) {
597: $error.="\nName $v contains 'capa'";
598: }
599: }
600: foreach my $bad ('res','raw','userfiles','priv','adm','uploaded') {
601: $error.="\nName $v reserved." if $v eq $bad;
602: }
603: if ($v=~/\W/) { $error.="\nName $v contains special characters"; }
604: }
605: if ($domainDescription!~/^[\w\s]+$/) {
606: $error.="\nDomain Description contains special characters";
607: }
608: foreach my $v ($perlvar{'lonExpire'},$perlvar{'lonLoadLim'}) {
609: unless ($v=~/^[\d+\.]+$/) { $error.="\nNumber expected instead of $v"; }
610: }
611: unless (($perlvar{'lonRole'} eq 'library') || ($perlvar{'lonRole'} eq 'access')) {
612: $error.="\nInvalid Role";
613: }
614: if ($error) { print "\n*** ERRORS: $error\n"; }
615: print(<<END);
616: ENTER A CHOICE OF 1-10 TO CHANGE, otherwise ENTER 11:
617: END
618: my $choice=<>;
619: chomp($choice);
620: if ($choice==1) {
621: print(<<END);
622: 1) Domain Name: $perlvar{'lonDefDomain'}
623: ENTER NEW VALUE (this is an internal value used to identify a group of
624: LON-CAPA machines, it must be alphanumerical, we suggest
625: using a part of your actual DNS domain. For example, for
626: the machine loncapa.msu.edu, we set the Domain to msu):
627: END
628: my $choice2=<>;
629: chomp($choice2);
630: $perlvar{'lonDefDomain'}=$choice2;
631: }
632: elsif ($choice==2) {
633: print(<<END);
634: 2) Domain Description: $domainDescription
635: ENTER NEW VALUE (this should be a string that describes your domain, spaces
636: and punctuation are fine except for ':'):
637: END
638: my $choice2=<>;
639: chomp($choice2);
640: $domainDescription=$choice2;
641: }
642: elsif ($choice==3) {
643: print(<<END);
644: 3) Machine Name: $perlvar{'lonHostID'}
645: ENTER NEW VALUE (this will be the name of the machine in the LON-CAPA network
646: it cannot contain any of '_' '-' '.' or ':'. We suggest that
647: if you are in the domain 'example' and are the first library
648: server you enter 'examplel1') :
649: END
650: my $choice2=<>;
651: chomp($choice2);
652: $perlvar{'lonHostID'}=$choice2;
653: }
654: elsif ($choice==4) {
655: print(<<END);
656: 4) System Administrator's E-mail Address: $perlvar{'lonAdmEMail'}
657: ENTER NEW VALUE:
658: END
659: my $choice2=<>;
660: chomp($choice2);
661: $perlvar{'lonAdmEMail'}=$choice2;
662: }
663: elsif ($choice==5) {
664: print(<<END);
665: 5) Support E-mail Address: $perlvar{'lonSupportEMail'}
666: ENTER NEW VALUE:
667: END
668: my $choice2=<>;
669: chomp($choice2);
670: $perlvar{'lonSupportEMail'}=$choice2;
671: }
672: elsif ($choice==6) {
673: print(<<END);
674: 6) Role: $perlvar{'lonRole'}
675: ENTER NEW VALUE (this should be either 'access' or 'library'
676: if in doubt select 'library'):
677: END
678: my $choice2=<>;
679: chomp($choice2);
680: $perlvar{'lonRole'}=$choice2;
681: }
682: elsif ($choice==7) {
683: print(<<END);
684: 7) Cache Expiration Time: $perlvar{'lonExpire'}
685: ENTER NEW VALUE (in seconds, 86400 is a reasonable value):
686: END
687: my $choice2=<>;
688: chomp($choice2);
689: $perlvar{'lonExpire'}=$choice2;
690: }
691: elsif ($choice==8) {
692: print(<<END);
693: 8) Server Load: $perlvar{'lonLoadLim'}
694: ENTER NEW VALUE:
695: END
696: my $choice2=<>;
697: chomp($choice2);
698: $perlvar{'lonLoadLim'}=$choice2;
699: }
700: elsif ($choice==9) {
701: print(<<END);
702: 9) User Load: $perlvar{'lonUserLoadLim'}
703: Numer of users that can login before machine is 'overloaded'
704: ENTER NEW VALUE (integer value, 0 means there is no limit):
705: END
706: my $choice2=<>;
707: chomp($choice2);
708: $perlvar{'lonUserLoadLim'}=$choice2;
709: }
710: elsif ($choice==10) {
711: print(<<END);
712: 10) Allow only secure connections: $securestatus
713: The Lon-CAPA communication daemons lonc and lond can be configured to
714: allow only secure connections by default.
715:
716: POSSIBLE CHOICES:
717: 1) allow only secure connections and don't connect to machines that
718: can not be connected to securely
719: 2) allow only secure connections but allow this machine to connect to
720: machines that don't support secure connections
721: 3) allow insecure connections to this machine but only allow connections
722: to machines that support secure connections
723: 4) allow insecure connections
724: ENTER NEW VALUE (currenly $securenum):
725: END
726: my $choice2=<>;
727: chomp($choice2);
728: if ($choice2 eq '1') {
729: $perlvar{'loncAllowInsecure'}=0;$perlvar{'londAllowInsecure'}=0;
730: } elsif ($choice2 eq '2') {
731: $perlvar{'loncAllowInsecure'}=0;$perlvar{'londAllowInsecure'}=1;
732: } elsif ($choice2 eq '3') {
733: $perlvar{'loncAllowInsecure'}=1;$perlvar{'londAllowInsecure'}=0;
734: } elsif ($choice2 eq '4') {
735: $perlvar{'loncAllowInsecure'}=1;$perlvar{'londAllowInsecure'}=1;
736: }
737: ($securestatus,$securenum)=&securesetting(%perlvar);
738: }
739: elsif (($choice==11) && (!$error)) {
740: $flag=1;
741: }
742: else {
743: print "Invalid input.\n";
744: }
745: }
746: open(OUT,">$confdir$filename") or
747: die("Cannot output to $confdir$filename\n");
748: foreach my $key (keys %perlvar) {
749: my $value=$perlvar{$key};
750: print(OUT <<END) unless $perlvarstatic{$key};
751: PerlSetVar $key $value
752: END
753: }
754: close(OUT);
755: </perlscript>
756: </file>
757: <file>
758: <target dist='default'>loncom/hosts.tab</target>
759: <perlscript mode='fg'>
760: unless (-l "<TARGET />") {
761: my $hostname=`hostname -f`;chomp($hostname);
762: $date=`date -I`; chomp($date);
763: $lonHostID=$perlvar{'lonHostID'};
764: $lonHostID=~s/\W//g;
765: $lineexistflag=0;
766: $hostidexistflag=0;
767: $line2insert=<<END;
768: $perlvar{'lonHostID'}:$perlvar{'lonDefDomain'}:$perlvar{'lonRole'}:$hostname
769: END
770: $domaininsert="$perlvar{'lonDefDomain'}:$domainDescription:$domainTabExtras\n";
771: if ($lonCluster eq 'standalone') {
772: open(OUT,'>../'.$lonCluster.'_hosts.tab') or
773: die('file generation error');
774: print(OUT $line2insert);
775: close(OUT);
776: open(OUT,'>../'.$lonCluster.'_domain.tab') or
777: die('file generation error');
778: print(OUT $domaininsert);
779: close(OUT);
780: }
781: if ($flag==1) {
782: `rm -f ../hosts.tab`;
783: open(IN,'<../'.$lonCluster.'_hosts.tab');
784: while(<IN>) {
785: if (/^$line2insert$/) {
786: $lineexistflag=1;
787: }
788: if (/^$lonHostID\:/) {
789: $hostidexistflag=1;
790: }
791: }
792: close(IN);
793: if ($hostidexistflag and !$lineexistflag) {
794: print <<END;
795: WARNING: $lonHostID already exists inside
796: loncapa/loncom/${lonCluster}_hosts.tab. The entry inside
797: ${lonCluster}_hosts.tab does not match your settings.
798: The entry inside ${lonCluster}_hosts.tab is being replaced
799: with your new values.
800: END
801: `grep -v "$lonHostID:" ../${lonCluster}_hosts.tab > ../new_${lonCluster}_hosts.tab`;
802: open(OUT,'>>../new_'.$lonCluster.'_hosts.tab') or
803: die("cannot open loncom/${lonCluster}_hosts.tab for output\n");
804: print(OUT $line2insert);
805: close(OUT);
806: `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
807: # email appropriate message
808: `echo "REPLACE:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "REPLACE:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
809: }
810: elsif ($hostidexistflag and $lineexistflag) {
811: print <<END;
812: Entry exists in ${lonCluster}_hosts.tab.
813: END
814: `ln -s ${lonCluster}_hosts.tab ../hosts.tab`;
815: # email appropriate message
816: `echo "STABLEUPDATE:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "STABLEUPDATE:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
817: }
818: elsif (!$hostidexistflag and !$lineexistflag) {
819: print <<END;
820: New entry for $lonCluster.
821: END
822: `cat ../${lonCluster}_hosts.tab > ../new_${lonCluster}_hosts.tab`;
823: open(OUT,'>>../new_'.$lonCluster.'_hosts.tab') or
824: die("cannot open loncom/new_${lonCluster}_hosts.tab for output\n");
825: print(OUT $line2insert);
826: close(OUT);
827: `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
828: # email appropriate message
829: `echo "INSERT:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "INSERT:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
830: }
831: }
832: $lineexistflag=0;
833: if ($flag==1) {
834: `rm -f ../domain.tab`;
835: open(IN,'<../'.$lonCluster.'_domain.tab');
836: while(<IN>) {
837: if (/^$domaininsert$/) {
838: $lineexistflag=1;
839: }
840: if (/^$perlvar{'lonDefDomain'}\:/) {
841: $domainexistflag=1;
842: }
843: }
844: close(IN);
845: if ($domainexistflag and !$lineexistflag) {
846: print <<END;
847: WARNING: $perlvar{'lonDefDomain'} already exists inside
848: loncapa/loncom/${lonCluster}_domain.tab. The entry inside
849: ${lonCluster}_domain.tab does not match your settings.
850: The entry inside ${lonCluster}_domain.tab is being replaced
851: with your new values.
852: END
853: `grep -v "$perlvar{'lonDefDomain'}:" ../${lonCluster}_domain.tab > ../new_${lonCluster}_domain.tab`;
854: open(OUT,'>>../new_'.$lonCluster.'_domain.tab') or
855: die("cannot open loncom/${lonCluster}_domain.tab for output\n");
856: print(OUT $domaininsert);
857: close(OUT);
858: `ln -s new_${lonCluster}_domain.tab ../domain.tab`;
859: # email appropriate message
860: `echo "REPLACEdom:$lonCluster:$lonHostID:$date:$domaninsert" | mail -s "REPLACEdom:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
861: }
862: elsif ($domainexistflag and $lineexistflag) {
863: print <<END;
864: Entry exists in ${lonCluster}_domain.tab.
865: END
866: `ln -s ${lonCluster}_domain.tab ../domain.tab`;
867: # email appropriate message
868: `echo "STABLEUPDATEdom:$lonCluster:$lonHostID:$date:$domaininsert" | mail -s "STABLEUPDATEdom:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
869: }
870: elsif (!$domainexistflag and !$lineexistflag) {
871: print <<END;
872: New entry for $lonCluster.
873: END
874: `cat ../${lonCluster}_domain.tab > ../new_${lonCluster}_domain.tab`;
875: open(OUT,'>>../new_'.$lonCluster.'_domain.tab') or
876: die("cannot open loncom/new_${lonCluster}_domain.tab for output\n");
877: print(OUT $domaininsert);
878: close(OUT);
879: `ln -s new_${lonCluster}_domain.tab ../domain.tab`;
880: # email appropriate message
881: `echo "INSERTdom:$lonCluster:$lonHostID:$date:$domaininsert" | mail -s "INSERTdom:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
882: }
883: }
884: }
885: </perlscript>
886: </file>
887: </files>
888: </piml>
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>