Return to updatequery.piml CVS log

Up to [LON-CAPA] / doc / loncapafiles

typo fix

    1: <!-- updatequery.piml -->
    2: <!-- Scott Harrison -->
    3: 
    4: <!-- $Id: updatequery.piml,v 1.2 2002/05/03 02:08:51 harris41 Exp $ -->
    5: 
    6: <!--
    7: 
    8: This file is part of the LearningOnline Network with CAPA (LON-CAPA).
    9: 
   10: LON-CAPA is free software; you can redistribute it and/or modify
   11: it under the terms of the GNU General Public License as published by
   12: the Free Software Foundation; either version 2 of the License, or
   13: (at your option) any later version.
   14: 
   15: LON-CAPA is distributed in the hope that it will be useful,
   16: but WITHOUT ANY WARRANTY; without even the implied warranty of
   17: MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   18: GNU General Public License for more details.
   19: 
   20: You should have received a copy of the GNU General Public License
   21: along with LON-CAPA; if not, write to the Free Software
   22: Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
   23: 
   24: /home/httpd/html/adm/gpl.txt
   25: 
   26: http://www.lon-capa.org/
   27: 
   28: -->
   29: 
   30: <piml>
   31: <targetroot>/</targetroot>
   32: <files>
   33: <file>
   34: <target dist='default'>/home/httpd/lonUsers2</target>
   35: <perlscript mode='fg'>
   36:   print(&lt;&lt;END);
   37: 
   38: 
   39: *********************************************
   40: *********************************************
   41: ****                                     ****
   42: **** LON-CAPA SYSTEM INFORMATION REQUEST ****
   43: ****                                     ****
   44: **** Please respond to the choices below ****
   45: ****                                     ****
   46: *********************************************
   47: *********************************************
   48: 
   49: END
   50: </perlscript>
   51: </file>
   52: <file>
   53: <target dist='default'>/home/httpd/lonUsers2</target>
   54: <perlscript mode='fg'>
   55: unless (-e "<TARGET />") {
   56:   print(&lt;&lt;END);
   57:            WELCOME TO LON-CAPA!
   58: 
   59: If you have questions, please visit http://install.lon-capa.org
   60: or contact sharrison@install.lon-capa.org.
   61: 
   62: ===============================================================================
   63: The following 3 values are needed to configure LON-CAPA:
   64: * Machine ID Name
   65: * LON-CAPA Domain Name, and
   66: * System Administration E-mail Address.
   67: END
   68: 
   69:   print(&lt;&lt;END);
   70: 
   71: **** Machine ID Name ****
   72: [this does NOT need to correspond to internet address names;
   73:  this name MUST be unique to the whole LON-CAPA network;
   74:  we recommend that you use a name based off of your institution;
   75:  good examples: "msul1" or "bionetl1";
   76:  bad examples: "loncapabox" or "studentsinside"]
   77: ENTER MACHINE ID NAME:
   78: END
   79: # get machine name
   80: # accept if valid, if not valid, tell user and repeat
   81: 
   82:   print(&lt;&lt;END);
   83: 
   84: **** Domain ****
   85: [this does NOT need to correspond to internet address domains,
   86:  examples might be "msu" or "bionet" or "vermontcc"]
   87: ENTER LONCAPA DOMAIN:
   88: END
   89: 
   90: # get domain name
   91: # accept if valid, if not valid, tell user and repeat
   92: 
   93:   print(&lt;&lt;END);
   94: 
   95: **** System Administrator's E-mail ****
   96: E-mail address of the person who will manage this machine
   97: [should be in the form somebody@somewhere]
   98: ENTER E-MAIL ADDRESS:
   99: END
  100: 
  101: # get e-mail address
  102: # accept if valid, if not valid, tell user and repeat
  103: # update loncapa.conf
  104: }
  105: </perlscript>
  106: </file>
  107: <file>
  108: <target dist='default'>/home/httpd/lonUsers2</target>
  109: <perlscript mode='fg'>
  110: # read values from loncapa.conf
  111:   print(&lt;&lt;END);
  112: 
  113: ===============================================================================
  114: This is now the current configuration of your machine.
  115: 1) Machine Name: $perlsetvar{'lonHostID'}
  116: 2) Domain Name: $perlsetvar{'lonDefDomain'}
  117: 3) System Administrator's E-mail Address: $perlsetvar{'lonAdmEmail'}
  118: 4) Role: $perlsetvar{'lonRole'}
  119: 5) Cache Expiration Time: $perlsetvar{'lonExpire'}
  120: 6) Server Load: $perlsetvar{'lonLoadLim'}
  121: 7) Everything is correct up above
  122: ENTER A CHOICE OF 1-6 TO CHANGE, otherwise ENTER 7:
  123: END
  124: 
  125: # implement editing logic below, interactively
  126: # update loncapa.conf until 7 is entered
  127: 
  128: </perlscript>
  129: </file>
  130: <file>
  131: <target dist='default'>loncom/hosts.tab</target>
  132: <perlscript mode='fg'>
  133: unless (-l "<TARGET />") {
  134:   print(&lt;&lt;END);
  135: 
  136: ===============================================================================
  137: What hosts.tab would you like to have installed?
  138: (hosts.tab is a listing of all other internet machines
  139: that a server system considers to be valid server systems
  140: on the LON-CAPA network)
  141: 
  142: 1) PRODUCTION - you want to deliver courses today or sometime very soon
  143:                 on this machine
  144: 2) DEVELOPMENT - you want to play with or explore LON-CAPA
  145: 3) Do not install hosts.tab right now
  146: 
  147: ENTER 1, 2, or 3:
  148: END
  149: # Option number 26 will install rawhide_hosts.tab, but
  150: # the typical user does not want to be part of an intensive
  151: # machine test cluster.
  152: 
  153: # get input
  154: # if valid then process, otherwise loop
  155: 
  156: }
  157: </perlscript>
  158: </file>
  159: </files>
  160: </piml>