/ / $|=1; print(<<END); ********************************************* ********************************************* **** **** **** LON-CAPA SYSTEM INFORMATION REQUEST **** **** **** **** Please respond to the choices below **** **** **** ********************************************* ********************************************* END #sleep(3); loncom/hosts.tab unless (-l "") { print(<<END); =============================================================================== Which cluster option would you like to have installed? IMPORTANT: to take advantage of the cluster options 1) and 3), you must contact lon-capa\@lon-capa.org. 1) PRODUCTION - you want to eventually connect this machine to the LON-CAPA content sharing network. This setting is for schools, colleges, and universities, that currently are running - or in the future will run - courses 2) STAND-ALONE - you want this machine to run in 'stand-alone' mode and not be connected to other LON-CAPA machines for now 3) DEVELOPMENT - you want to do software (not content!) development with this workstation and eventually link it with the workstations of other LON-CAPA software developers. 4) RUNNING YOUR OWN CLUSTER - this machine is not in the standard LON-CAPA clusters and won't be in the future and you want the existing hosts.tab and domain.tab files to be left alone. (This choice is unlikely what you want to select.) END # Option number 26 will install rawhide_hosts.tab, but # the typical user does not want to be part of an intensive # machine test cluster. # get input # if valid then process, otherwise loop $flag=0; while (!$flag) { print "ENTER 1, 2, 3, or 4:\n"; my $choice=<>; chomp($choice); if ($choice==1) { $lonCluster='production'; $flag=1; } elsif ($choice==2) { $lonCluster='standalone'; $flag=1; } elsif ($choice==3) { $lonCluster='development'; $flag=1; } elsif ($choice==4) { $lonCluster='existing'; $flag=1; foreach my $file ('hosts.tab','dns_hosts.tab', 'domain.tab','dns_domain.tab') { if (-e '/home/httpd/lonTabs/'.$file) { `cp /home/httpd/lonTabs/$file ../existing_$file`; } else { print <<END; There is no existing /home/httpd/lonTabs/$file END die(''); } } } elsif ($choice==26) { $lonCluster='rawhide'; $flag=1; } } } /home/httpd/lonTabs/hosts.tab $|=1; my $domainDescription; my $domainTabExtras; my $primaryLibServer; my $protocol; my @libservers = (); unless (-e "") { print(<<END); WELCOME TO LON-CAPA! If you have questions, please visit http://install.lon-capa.org or contact helpdesk\@lon-capa.org. =============================================================================== The following 4 values are needed to configure LON-CAPA: * Machine Role * LON-CAPA Domain Name * LON-CAPA Machine ID Name, and * Server Administration E-mail Address. =============================================================================== In addition, a Support E-mail Address can also be included. If an address is included then one of the options in the LON-CAPA help menu will be a link to a form that a user will complete to request LON-CAPA help. END open(OUT,'>/tmp/loncapa_updatequery.out'); close(OUT); # query for Machine Role print(<<END); **** Machine Role **** Library server (recommended if first-time installation of LON-CAPA): Servers that are repositories of authoritative educational resources. These servers also provide the construction space by which instructors assemble their classroom online material. Access server: Servers that load-balance high-traffic delivery of educational resources over the world-wide web. 1) Will this be a library server? (recommended if this is your first install) 2) Or, will this be an access server? END my $flag=0; my $r=''; my $lonRole; while (!$flag) { print "ENTER A CHOICE OF 1 or 2:\n"; my $choice=<>; chomp($choice); if ($choice==1) { open(OUT,'>>/tmp/loncapa_updatequery.out'); print(OUT 'lonRole'."\t".'library'."\n"); close(OUT); $lonRole='library'; $r='l'; $flag=1; } elsif ($choice==2) { open(OUT,'>>/tmp/loncapa_updatequery.out'); print(OUT 'lonRole'."\t".'access'."\n"); close(OUT); $lonRole='access'; $r='a'; $flag=2; } else { } } # need to recommend a machine ID name (ipdomain.l.somenumber) my $hostname=`hostname -f`; chomp($hostname); my $ipdomain=''; if ($hostname=~/([^\.]*)\.([^\.]*)$/) { $ipdomain=$1; } print(<<END); **** Domain **** [This does NOT need to correspond to internet address domains. Please make this name short AND descriptive of your organization. Domain names are close to impossible to change later!!! Good examples might be "msu" or "bionet" or "vermontcc". Bad examples are "physics" (too general) or "michiganstateuniversity" (too long) or "msuedu" (internet domain, just make it "msu") or "msuphysics" (only if there is a good reason to limit to department - we don't know of one) or "mydomain" (what is that?) Avoid multiple domains at the same institution, even if it means that you have to actually work together with your colleagues. You can still run multiple library servers within the same domain. If this domain is eventually going to be part of the main production cluster, you MUST contact the LON-CAPA group at MSU (loncapa@loncapa.org) to have a domain name assigned, and then use it exactly as given. This is also true for test installs that might eventually turn into production setups. Stop now if you didn't do so.] END # get domain name # accept if valid, if not valid, tell user and repeat $flag=0; my $lonDefDomain; while (!$flag) { if ($ipdomain) { print(<<END); ENTER LONCAPA DOMAIN [$ipdomain]: END } else { print(<<END); ENTER LONCAPA DOMAIN: END } my $choice=<>; chomp($choice); my $bad_domain_flag=0; my @bad_domain_names=('res','raw','userfiles','priv','adm','uploaded', 'editupload'); foreach my $bad (@bad_domain_names) { $bad_domain_flag=1 if $choice eq $bad; } if ($choice=~/capa/i) { $bad_domain_flag=1; } if ($ipdomain and $choice=~/^\s*$/) { $choice=$ipdomain; open(OUT,'>>/tmp/loncapa_updatequery.out'); print(OUT 'lonDefDomain'."\t".$choice."\n"); close(OUT); $lonDefDomain=$choice; $flag=1; } elsif (length($choice)>35) { print "Name too long\n"; } elsif (length($choice)<2) { print "Name too short\n"; } elsif ($bad_domain_flag) { print "Invalid input ('$choice' conflicts with LON-CAPA namespace).\n"; print "Please try something different than '$choice'\n"; } elsif ($choice!~/\_/ and $choice=~/^[\w\-.]+$/) { open(OUT,'>>/tmp/loncapa_updatequery.out'); print(OUT 'lonDefDomain'."\t".$choice."\n"); close(OUT); $lonDefDomain=$choice; $r='l'; $flag=1; } else { print "Invalid input (only alphanumeric characters, '-', and '.' supported).\n"; } } # get domain description # accept if valid, if not valid, tell user and repeat $flag=0; while (!$flag) { print(<<END); **** Domain Description **** String describing the domain, to be shown to users. [Example, msu is Michigan State University] ENTER DOMAIN DESCRIPTION: END my $choice=<>; chomp($choice); if ($choice!~/:/) { open(OUT,'>>/tmp/loncapa_updatequery.out'); print(OUT 'domainDescription'."\t".$choice."\n"); close(OUT); $domainDescription=$choice; $flag=1; } else { print "Invalid input (no ':' allowed).\n"; } } my $lonHostID; if ($lonDefDomain) { $lonHostID=$lonDefDomain.$r.int(1+rand(9)); # should be probably also detect # against the hosts.tab } print(<<END); **** Machine ID Name **** [This does NOT need to correspond to internet address names; this name MUST be unique to the whole LON-CAPA network; we recommend that you use a name based off of your institution. Good examples: "msul1" or "bioneta2". Bad examples: "loncapabox" or "studentsinside". Note that machine names are very hard to change later.] END # get machine name # accept if valid, if not valid, tell user and repeat $flag=0; while (!$flag) { if ($ipdomain) { print(<<END); ENTER LONCAPA MACHINE ID [$lonHostID]: END } else { print(<<END); ENTER LONCAPA MACHINE ID: END } my $choice=<>; chomp($choice); if ($choice=~/capa/i) { print "Invalid input (names containing 'capa' are reserved).\n"; } elsif ($lonHostID and $choice=~/^\s*$/) { $choice=$lonHostID; open(OUT,'>>/tmp/loncapa_updatequery.out'); print(OUT 'lonHostID'."\t".$choice."\n"); close(OUT); $lonHostID=$choice; $flag=1; } elsif (length($choice)>45) { print "Name too long\n"; } elsif (length($choice)<4) { print "Name too short\n"; } elsif ($choice!~/\_/ and $choice=~/^[\w\-.]+$/) { open(OUT,'>>/tmp/loncapa_updatequery.out'); print(OUT 'lonHostID'."\t".$choice."\n"); close(OUT); $lonHostID=$choice; $flag=1; } else { print "Invalid input (only alphanumeric characters, '-', and '.' supported).\n"; } } # get primary library server in domain if ($lonRole eq 'library') { if (!grep/^\Q$lonHostID\E$/,@libservers) { push(@libservers,$lonHostID); } if (@libservers == 1) { $primaryLibServer = $libservers[0]; } } while (!$flag) { print(<<END); **** Domain's Primary Library Server ID **** This should be the LON-CAPA machine ID of a library server in your domain. If you only have a single library server in your domain, then the Primary Library server ID will be the machine ID of that server. This server will be where domain data which are not associated with any specific home library server will be stored (e.g., e-mail broadcast by administrators to users in the domain). END if (defined($primaryLibServer)) { print(<<END); ENTER DOMAIN'S PRIMARY LIBRARY SERVER ID [$primaryLibServer]: END } elsif (@libservers > 0) { print(<<END); ENTER DOMAIN'S PRIMARY LIBRARY SERVER ID [$libservers[0]] END } else { print (<<END); No library servers could be identified for this domain. If you have already installed LON-CAPA on a different server (designated as a library server) in this domain, please enter the LONCAPA MACHINE ID of that server. If not, you will need to install a LON-CAPA library server. Enter the MACHINE ID of the server you plan to designate as a library server. END } my $choice=<>; chomp($choice); if ($primaryLibServer and $choice=~/^\s*$/) { $choice=$primaryLibServer; open(OUT,'>>/tmp/loncapa_updatequery.out'); print(OUT 'primaryLibServer'."\t".$choice."\n"); close(OUT); $flag=1; } elsif (length($choice)>35) { print "Name too long\n"; } elsif (length($choice)<4) { print "Name too short\n"; } elsif ($choice!~/\_/ and $choice=~/^[\w\-.]+$/) { open(OUT,'>>/tmp/loncapa_updatequery.out'); print(OUT 'primaryLibServer'."\t".$choice."\n"); close(OUT); $primaryLibServer=$choice; $flag=1; } else { print "Invalid input (only alphanumeric characters, '-', and '.' supported).\n"; } } # get admin e-mail address # accept if valid, if not valid, tell user and repeat $flag=0; my $lonAdmEMail; while (!$flag) { print(<<END); **** Server Administrators E-mail **** E-mail address of the person who will manage this machine [should be in the form somebody\@somewhere] ENTER ADMIN E-MAIL ADDRESS: END my $choice=<>; chomp($choice); if ($choice=~/\@/) { open(OUT,'>>/tmp/loncapa_updatequery.out'); print(OUT 'lonAdmEMail'."\t".$choice."\n"); close(OUT); $lonAdmEMail=$choice; $flag=1; } else { print "Invalid input (this needs to look like an e-mail address!).\n"; } } # get support e-mail address # accept if valid, if not valid, tell user and repeat $flag=0; my $lonSupportEMail; while (!$flag) { print(<<END); **** Support E-mail **** E-mail address of the person who will receive help requests from LON-CAPA users who access the system via this server. If the address is left blank, then a help support form will not be displayed as part of the help menu. [should be in the form somebody\@somewhere] ENTER SUPPORT E-MAIL ADDRESS: END my $choice=<>; chomp($choice); $choice =~ s/\s//g; if ( ($choice=~/\@/) || $choice eq '') { open(OUT,'>>/tmp/loncapa_updatequery.out'); print(OUT 'lonSupportEMail'."\t".$choice."\n"); close(OUT); $lonSupportEMail=$choice; $flag=1; } else { print "Invalid input (this either needs to be blank, or look like an e-mail address!).\n"; } } while (!$flag) { print(<<END); **** Web Server Protocol **** If you plan to run the Apache server with SSL enabled, the protocol should be: https; otherwise it should be http. ENTER WEB SERVER PROTOCOL: END my $choice=<>; chomp($choice); if ($choice!~/^https?$/) { open(OUT,'>>/tmp/loncapa_updatequery.out'); print(OUT 'protocol'."\t".$choice."\n"); close(OUT); $protocol=$choice; $flag=1; } else { print "Invalid input (only http or https allowed).\n"; } } # update loncapa.conf my $confdir = '/etc/httpd/conf/'; if ('' eq 'sles10' || '' eq 'suse10.1' || '' eq 'suse10.2' || '' eq 'suse10.3' || '' eq 'suse11.1' || '' eq 'suse11.2' || '' eq 'debian5' || '' eq 'ubuntu6' || '' eq 'ubuntu8') { $confdir = '/etc/apache2/'; } my $filename='loncapa.conf'; my %perlvar; if (-e "$confdir$filename") { open(CONFIG,'<'.$confdir.$filename) or die("Can't read $confdir$filename"); while (my $configline=<CONFIG>) { if ($configline =~ /^[^\#]*PerlSetVar/) { my ($unused,$varname,$varvalue)=split(/\s+/,$configline); chomp($varvalue); $perlvar{$varname}=$varvalue if $varvalue!~/^\{\[\[\[\[/; } } close(CONFIG); } $perlvar{'lonHostID'}=$lonHostID; $perlvar{'lonDefDomain'}=$lonDefDomain; $perlvar{'lonAdmEMail'}=$lonAdmEMail; $perlvar{'lonSupportEMail'}=$lonSupportEMail; $perlvar{'lonRole'}=$lonRole; unless ($perlvar{'lonLoadLim'} and $perlvar{'lonLoadLim'}!~/\{\[\[\[\[/) { $perlvar{'lonLoadLim'}='2.00'; } unless ($perlvar{'lonUserLoadLim'} and $perlvar{'lonUserLoadLim'}!~/\{\[\[\[\[/) { $perlvar{'lonUserLoadLim'}='0'; } unless ($perlvar{'lonExpire'} and $perlvar{'lonExpire'}!~/\{\[\[\[\[/) { $perlvar{'lonExpire'}='86400'; } unless ($perlvar{'lonReceipt'} and $perlvar{'lonReceipt'}!~/\{\[\[\[\[/) { my $lonReceipt=''; srand(time ^ $$ ^ unpack "%L*", `ps axww | gzip`); my @alnum=(0..9,a..z); foreach my $i (1..20) { $lonReceipt.=$alnum[int(rand(36))]; } $perlvar{'lonReceipt'}=$lonReceipt; } open(OUT,">$confdir$filename") or die("Cannot output to $confdir$filename\n"); foreach my $key (keys %perlvar) { my $value=$perlvar{$key}; my $line = "PerlSetVar $key $value"; if ($value eq '') { $line = '#'.$line; } print(OUT <<END); $line END } close(OUT); } /etc/httpd/conf/ /etc/apache2/ sub securesetting { my (%perlvar)=@_; my $securestatus='unknown'; my $securenum=''; if ( $perlvar{'loncAllowInsecure'}&& $perlvar{'londAllowInsecure'}) { $securestatus='no'; $securenum='4'; } elsif ( $perlvar{'loncAllowInsecure'}&& !$perlvar{'londAllowInsecure'}) { $securestatus='lond'; $securenum='3'; } elsif (!$perlvar{'loncAllowInsecure'}&& $perlvar{'londAllowInsecure'}) { $securestatus='lonc'; $securenum='2'; } elsif (!$perlvar{'loncAllowInsecure'}&& !$perlvar{'londAllowInsecure'}) { $securestatus='yes (lond and lonc)'; $securenum='1'; } return ($securestatus,$securenum); } # read values from loncapa.conf my $confdir = ""; my $filename='loncapa.conf'; my %perlvar; my ($securestatus,$securenum); if (-e "$confdir$filename") { open(CONFIG,'<'.$confdir.$filename) or die("Can't read $confdir$filename"); while (my $configline=<CONFIG>) { if ($configline =~ /^[^\#]*PerlSetVar/) { my ($unused,$varname,$varvalue)=split(/\s+/,$configline); chomp($varvalue); $perlvar{$varname}=$varvalue; } } close(CONFIG); } unless ($perlvar{'lonLoadLim'} and $perlvar{'lonLoadLim'}!~/\{\[\[\[\[/) { $perlvar{'lonLoadLim'}='2.00'; } unless ($perlvar{'lonUserLoadLim'} and $perlvar{'lonUserLoadLim'}!~/\{\[\[\[\[/) { $perlvar{'lonUserLoadLim'}='0'; } unless ($perlvar{'lonExpire'} and $perlvar{'lonExpire'}!~/\{\[\[\[\[/) { $perlvar{'lonExpire'}='86400'; } unless ($perlvar{'londAllowInsecure'} and $perlvar{'londAllowInsecure'}!~/\{\[\[\[\[/) { $perlvar{'londAllowInsecure'}='1'; } unless ($perlvar{'loncAllowInsecure'} and $perlvar{'loncAllowInsecure'}!~/\{\[\[\[\[/) { $perlvar{'loncAllowInsecure'}='1'; } ($securestatus,$securenum)=&securesetting(%perlvar); unless ($perlvar{'lonReceipt'} and $perlvar{'lonReceipt'}!~/\{\[\[\[\[/) { my $lonReceipt=''; srand(time ^ $$ ^ unpack "%L*", `ps axww | gzip`); my @alnum=(0..9,a..z); foreach my $i (1..20) { $lonReceipt.=$alnum[int(rand(36))]; } $perlvar{'lonReceipt'}=$lonReceipt; } my %perlvarstatic; if (-e "${confdir}loncapa_apache.conf") { open(CONFIG,'<'.$confdir.'loncapa_apache.conf') or die("Can't read ${confdir}loncapa_apache.conf"); while (my $configline=<CONFIG>) { if ($configline =~ /^[^\#]*PerlSetVar/) { my ($unused,$varname,$varvalue)=split(/\s+/,$configline); chomp($varvalue); $perlvarstatic{$varname}=$varvalue; } } close(CONFIG); } my (@hosts_files, @domain_files); if ( $lonCluster ne 'existing') { push(@domain_files,'../'.$lonCluster.'_domain.tab', '../'.$lonCluster.'_dns_domain.tab'); push(@hosts_files,'../'.$lonCluster.'_hosts.tab', '../'.$lonCluster.'_dns_hosts.tab'); } push(@domain_files,'/home/httpd/lonTabs/domain.tab', '/home/httpd/lonTabs/dns_domain.tab'); push(@hosts_files,'/home/httpd/lonTabs/hosts.tab', '/home/httpd/lonTabs/dns_hosts.tab'); if (!$domainDescription) { foreach my $file (@domain_files) { open(IN,'<'.$file); while(my $line = <IN>) { if ($line =~ /^\Q$perlvar{'lonDefDomain'}\E\:/) { (undef,$domainDescription,$domainTabExtras)=split(/:/,$line,3); chomp($domainDescription); chomp($domainTabExtras); # the remaining field (primary lib server) is handled later $domainTabExtras = join(':',(split(/:/,$domainTabExtras))[0..5]); last; } } close(IN); last if ($domainDescription); } } if (!$protocol) { foreach my $file (@hosts_files) { open(IN,'<'.$file); while(my $line = <IN>) { if ($line =~ /^\Q$perlvar{'lonHostID'}\E:\Q$perlvar{'lonDefDomain'}\E\:(?:access|library)\:(https?)/) { $protocol = $1; last; } } } } if (!$protocol) { $protocol = 'http'; } while(!$primaryLibServ && (@hosts_file || @domain_files)) { my $file = shift(@domain_files); open(IN,'<'.$file); while(my $line = <IN>) { if ($line =~ /^\Q$perlvar{'lonDefDomain'}\E\:/) { $primaryLibServer=(split(/:/,$line))[8]; chomp($primaryLibServer); } } close(IN); last if ($primaryLibServer); $file = shift(@hosts_files); open(IN,'<'.$file); while(my $line = <IN>) { if ($line =~ /^([^\:]+)\:\Q$perlvar{'lonDefDomain'}\E\:library\:/) { push(@libservers,$1); } } # make list unique @libservers = keys(%{{ map { $_ => 1 } (@libservers) }}); close(IN); if (@libservers == 1) { $primaryLibServer = $libservers[0]; } } # implement editing logic below, interactively # update loncapa.conf until 13 is entered $flag=0; while (!$flag) { print(<<END); =============================================================================== This is now the current configuration of your machine. 1) Domain Name: $perlvar{'lonDefDomain'} 2) Domain Description: $domainDescription 3) Machine Name: $perlvar{'lonHostID'} 4) ID of primary library server for domain: $primaryLibServer 5) Server Administrator's E-mail Address: $perlvar{'lonAdmEMail'} 6) Support E-mail Address: $perlvar{'lonSupportEMail'} 7) Web Server Protocol (http or https): $protocol 8) Role: $perlvar{'lonRole'} 9) Cache Expiration Time: $perlvar{'lonExpire'} 10) Server Load: $perlvar{'lonLoadLim'} 11) User Load: $perlvar{'lonUserLoadLim'} 12) Allow only secure connections: $securestatus 13) Everything is correct up above END my @error; foreach my $v ($perlvar{'lonDefDomain'},$perlvar{'lonHostID'}) { if (length($v)>35) { $error.="\nName $v too long"; } if (length($v)<2) { $error.="\nName $v too short"; } if ($v=~/capa/i) { if ($v!~/^oucapa\d+$/ && ($v!~/^capa\d+$/ && $perlvar{'lonDefDomain'} eq 'uwsp')) { push(@error,"Name $v contains 'capa'"); } } foreach my $bad ('res','raw','userfiles','priv','adm','uploaded', 'editupload') { push(@error,"\nName $v reserved.") if $v eq $bad; } if ($v=~/[^\w\-.]/) { push(@error,"Name $v contains special characters"); } } if ($domainDescription =~ /^\s*$/) { push(@error,"Domain Description is blank."); } elsif ($domainDescription!~/^[\(\)\-\w\s,]+$/) { push(@error,"Domain Description contains special characters."); } foreach my $v ($perlvar{'lonExpire'},$perlvar{'lonLoadLim'}) { unless ($v=~/^[\d+\.]+$/) { push(@error,"Number expected instead of $v"); } } unless (($perlvar{'lonRole'} eq 'library') || ($perlvar{'lonRole'} eq 'access')) { push(@error,"Invalid Role"); } unless (($protocol eq 'http') || ($protocol eq 'https')) { push(@error,"Invalid Protocol (must be http or https"); } if (!defined($primaryLibServer)) { if (@libservers > 0) { push(@error,"No primary library server ID designated. Choose from: ".join(',',sort(@libservers))); } else { push(@error,"No library servers in this domain (including current server)"); } } else { if (length($primaryLibServer)>35) { push(@error,"Primary Library Server ID: $primaryLibServer too long"); } if (length($primaryLibServer)<2) { push(@error,"Primary Library Server ID: $primaryLibServer too short"); } if ($primaryLibServer =~/capa/i) { if ($primaryLibServer!~/^oucapa\d+$/ && ($primaryLibServer!~/^capa\d+$/ && $perlvar{'lonDefDomain'} eq 'uwsp')) { push(@error,"Primary library server ID $primaryLibServer contains 'capa'") } } foreach my $bad ('res','raw','userfiles','priv','adm','uploaded', 'editupload') { push(@error,"Primary library server ID $primaryLibServer reserved.") if $primaryLibServer eq $bad; } if ($primaryLibServer=~/[^\w\-.]/) { push(@error,"Primary library server ID $primaryLibServer contains special characters"); } } if (@error) { print "\n*** ERRORS: \n\t".join("\n\t",@error)."\n"; } print(<<END); ENTER A CHOICE OF 1-12 TO CHANGE, otherwise ENTER 13: END my $choice=<>; chomp($choice); if ($choice==1) { print(<<END); 1) Domain Name: $perlvar{'lonDefDomain'} ENTER NEW VALUE (this is an internal value used to identify a group of LON-CAPA machines, it must be alphanumerical, we suggest using a part of your actual DNS domain. For example, for the machine loncapa.msu.edu, we set the Domain to msu): END my $choice2=<>; chomp($choice2); $perlvar{'lonDefDomain'}=$choice2; } elsif ($choice==2) { print(<<END); 2) Domain Description: $domainDescription ENTER NEW VALUE (this should be a string that describes your domain, spaces and punctuation are fine except for ':'): END my $choice2=<>; chomp($choice2); $domainDescription=$choice2; } elsif ($choice==3) { print(<<END); 3) Machine Name: $perlvar{'lonHostID'} ENTER NEW VALUE (this will be the name of the machine in the LON-CAPA network it cannot contain any of '_' '-' '.' or ':'. We suggest that if you are in the domain 'example' and are the first library server you enter 'examplel1') : END my $choice2=<>; chomp($choice2); $perlvar{'lonHostID'}=$choice2; } elsif ($choice==4) { print(<<END); 4) ID of primary library server for domain: $primaryLibServer ENTER NEW VALUE (this will be the LON-CAPA Machine ID of a library server in your domain; it cannot contain any of '_' '-' '.' or ':'. This server will be where domain data which are not associated with any specific home library server will be stored (e.g., e-mail broadcast by Domain Coordinators to users in the domain). END my $choice2=<>; chomp($choice2); $primaryLibServer=$choice2; } elsif ($choice==5) { print(<<END); 5) Server Administrator's E-mail Address: $perlvar{'lonAdmEMail'} ENTER NEW VALUE: END my $choice2=<>; chomp($choice2); $perlvar{'lonAdmEMail'}=$choice2; } elsif ($choice==6) { print(<<END); 6) Support E-mail Address: $perlvar{'lonSupportEMail'} ENTER NEW VALUE: END my $choice2=<>; chomp($choice2); $perlvar{'lonSupportEMail'}=$choice2; } elsif ($choice==7) { print(<<END); 7) Server Protocol (http or https): ENTER NEW VALUE: (this should be either 'http' or 'https' if in doubt set to 'http'): END my $choice2=<>; chomp($choice2); $protocol=$choice2; } elsif ($choice==8) { print(<<END); 8) Role: $perlvar{'lonRole'} ENTER NEW VALUE (this should be either 'access' or 'library' if in doubt select 'library'): END my $choice2=<>; chomp($choice2); $perlvar{'lonRole'}=$choice2; } elsif ($choice==9) { print(<<END); 9) Cache Expiration Time: $perlvar{'lonExpire'} ENTER NEW VALUE (in seconds, 86400 is a reasonable value): END my $choice2=<>; chomp($choice2); $perlvar{'lonExpire'}=$choice2; } elsif ($choice==10) { print(<<END); 10) Server Load: $perlvar{'lonLoadLim'} ENTER NEW VALUE: END my $choice2=<>; chomp($choice2); $perlvar{'lonLoadLim'}=$choice2; } elsif ($choice==11) { print(<<END); 11) User Load: $perlvar{'lonUserLoadLim'} Numer of users that can login before machine is 'overloaded' ENTER NEW VALUE (integer value, 0 means there is no limit): END my $choice2=<>; chomp($choice2); $perlvar{'lonUserLoadLim'}=$choice2; } elsif ($choice==12) { print(<<END); 12) Allow only secure connections: $securestatus The Lon-CAPA communication daemons lonc and lond can be configured to allow only secure connections by default. POSSIBLE CHOICES: 1) allow only secure connections and don't connect to machines that can not be connected to securely 2) allow only secure connections but allow this machine to connect to machines that don't support secure connections 3) allow insecure connections to this machine but only allow connections to machines that support secure connections 4) allow insecure connections ENTER NEW VALUE (currenly $securenum): END my $choice2=<>; chomp($choice2); if ($choice2 eq '1') { $perlvar{'loncAllowInsecure'}=0;$perlvar{'londAllowInsecure'}=0; } elsif ($choice2 eq '2') { $perlvar{'loncAllowInsecure'}=0;$perlvar{'londAllowInsecure'}=1; } elsif ($choice2 eq '3') { $perlvar{'loncAllowInsecure'}=1;$perlvar{'londAllowInsecure'}=0; } elsif ($choice2 eq '4') { $perlvar{'loncAllowInsecure'}=1;$perlvar{'londAllowInsecure'}=1; } ($securestatus,$securenum)=&securesetting(%perlvar); } elsif (($choice==13) && (!$error)) { $flag=1; } else { print "Invalid input.\n"; } } open(OUT,">$confdir$filename") or die("Cannot output to $confdir$filename\n"); foreach my $key (keys %perlvar) { my $value=$perlvar{$key}; my $line = "PerlSetVar $key $value"; if ($value eq '') { $line = '#'.$line; } print(OUT <<END) unless $perlvarstatic{$key}; $line END } close(OUT); loncom/hosts.tab unless (-l "") { my $hostname=`hostname -f`;chomp($hostname); $date=`date -I`; chomp($date); $lonHostID=$perlvar{'lonHostID'}; $lonHostID=~s/[^\w\-.]//g; $lineexistflag=0; $hostidexistflag=0; $line2insert=<<END; $perlvar{'lonHostID'}:$perlvar{'lonDefDomain'}:$perlvar{'lonRole'}:$hostname:$protocol END if (!$domainTabExtras) { $domainTabExtras=':::::'; } $domaininsert="$perlvar{'lonDefDomain'}:$domainDescription:$domainTabExtras:$primaryLibServer\n"; if ($lonCluster eq 'standalone') { open(OUT,'>../'.$lonCluster.'_hosts.tab') or die('file generation error'); print(OUT $line2insert); print OUT ("^$hostname:$protocol\n"); close(OUT); open(OUT,'>../'.$lonCluster.'_dns_hosts.tab') or die('file generation error'); print(OUT $line2insert); close(OUT); open(OUT,'>../'.$lonCluster.'_domain.tab') or die('file generation error'); print(OUT $domaininsert); close(OUT); open(OUT,'>../'.$lonCluster.'_dns_domain.tab') or die('file generation error'); print(OUT $domaininsert); close(OUT); } if ($flag==1) { `rm -f ../hosts.tab`; `rm -f ../dns_hosts.tab`; `ln -s ${lonCluster}_dns_hosts.tab ../dns_hosts.tab`; open(IN,'<../'.$lonCluster.'_dns_hosts.tab'); while(my $line = <IN>) { if ($line =~ /^\Q$line2insert\E$/) { $lineexistflag=1; } if ($line =~ /^\Q$lonHostID\E\:/) { $hostidexistflag=1; } } close(IN); if ($hostidexistflag and !$lineexistflag) { print <<END; WARNING: $lonHostID already exists inside loncapa/loncom/${lonCluster}_dns_hosts.tab. The entry inside ${lonCluster}_dns_hosts.tab does not match your settings. An entry inside ${lonCluster}_hosts.tab will be made with your new values. END `grep -v "$lonHostID:" ../${lonCluster}_hosts.tab > ../new_${lonCluster}_hosts.tab`; open(OUT,'>>../new_'.$lonCluster.'_hosts.tab') or die("cannot open loncom/${lonCluster}_hosts.tab for output\n"); print(OUT $line2insert); close(OUT); `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`; # email appropriate message `echo "REPLACE:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "REPLACE:$lonCluster:$lonHostID:$protocol:$date" installrecord\@mail.lon-capa.org`; } elsif ($hostidexistflag and $lineexistflag) { print <<END; Entry exists in ${lonCluster}_dns_hosts.tab. Making duplicate entry in ${lonCluster}_hosts.tab END `grep -v "$lonHostID:" ../${lonCluster}_hosts.tab > ../new_${lonCluster}_hosts.tab`; open(OUT,'>>../new_'.$lonCluster.'_hosts.tab') or die("cannot open loncom/${lonCluster}_hosts.tab for output\n"); print(OUT $line2insert); close(OUT); `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`; # email appropriate message `echo "STABLEUPDATE:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "STABLEUPDATE:$lonCluster:$lonHostID:$protocol:$date" installrecord\@mail.lon-capa.org`; } elsif (!$hostidexistflag and !$lineexistflag) { print <<END; New entry for $lonCluster. END `cat ../${lonCluster}_hosts.tab > ../new_${lonCluster}_hosts.tab`; open(OUT,'>>../new_'.$lonCluster.'_hosts.tab') or die("cannot open loncom/new_${lonCluster}_hosts.tab for output\n"); print(OUT $line2insert); close(OUT); `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`; # email appropriate message `echo "INSERT:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "INSERT:$lonCluster:$lonHostID:$protocol:$date" installrecord\@mail.lon-capa.org`; } } $lineexistflag=0; if ($flag==1) { `rm -f ../domain.tab`; `rm -f ../dns_domain.tab`; `ln -s ${lonCluster}_dns_domain.tab ../dns_domain.tab`; open(IN,'<../'.$lonCluster.'_dns_domain.tab'); while(my $line = <IN>) { if ($line =~/^\Q$domaininsert\E$/) { $lineexistflag=1; } if ($line =~/^\Q$perlvar{'lonDefDomain'}\E\:/) { $domainexistflag=1; } } close(IN); if ($domainexistflag and !$lineexistflag) { print <<END; WARNING: $perlvar{'lonDefDomain'} already exists inside loncapa/loncom/${lonCluster}_dns_domain.tab. The entry inside ${lonCluster}_dns_domain.tab does not match your settings. An entry will be made in inside ${lonCluster}_domain.tab with your new values. END `grep -v "$perlvar{'lonDefDomain'}:" ../${lonCluster}_domain.tab > ../new_${lonCluster}_domain.tab`; open(OUT,'>>../new_'.$lonCluster.'_domain.tab') or die("cannot open loncom/${lonCluster}_domain.tab for output\n"); print(OUT $domaininsert); close(OUT); `ln -s new_${lonCluster}_domain.tab ../domain.tab`; # email appropriate message `echo "REPLACEdom:$lonCluster:$lonHostID:$date:$domaninsert" | mail -s "REPLACEdom:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`; } elsif ($domainexistflag and $lineexistflag) { `grep -v "$perlvar{'lonDefDomain'}:" ../${lonCluster}_domain.tab > ../new_${lonCluster}_domain.tab`; open(OUT,'>>../new_'.$lonCluster.'_domain.tab') or die("cannot open loncom/${lonCluster}_domain.tab for output\n"); print(OUT $domaininsert); close(OUT); print <<END; Entry exists in ${lonCluster}_dns_domain.tab. Making duplicate entry in ${lonCluster}_domain.tab END `ln -s new_${lonCluster}_domain.tab ../domain.tab`; # email appropriate message `echo "STABLEUPDATEdom:$lonCluster:$lonHostID:$date:$domaininsert" | mail -s "STABLEUPDATEdom:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`; } elsif (!$domainexistflag and !$lineexistflag) { print <<END; New entry for $lonCluster. END `cat ../${lonCluster}_domain.tab > ../new_${lonCluster}_domain.tab`; open(OUT,'>>../new_'.$lonCluster.'_domain.tab') or die("cannot open loncom/new_${lonCluster}_domain.tab for output\n"); print(OUT $domaininsert); close(OUT); `ln -s new_${lonCluster}_domain.tab ../domain.tab`; # email appropriate message `echo "INSERTdom:$lonCluster:$lonHostID:$date:$domaininsert" | mail -s "INSERTdom:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`; } } }