Annotation of doc/loncapafiles/webserver.piml, revision 1.10

1.8       harris41    1: <!DOCTYPE piml PUBLIC "-//TUX/DTD piml 1.0 Final//EN" 
                      2: 	"http://lpml.sourceforge.net/DTD/piml.dtd">
1.1       harris41    3: <!-- webserver.piml -->
                      4: <!-- Scott Harrison -->
                      5: 
1.10    ! harris41    6: <!-- $Id: webserver.piml,v 1.9 2002/05/12 19:02:18 harris41 Exp $ -->
1.1       harris41    7: 
                      8: <!--
                      9: 
                     10: Copyright Michigan State University Board of Trustees
                     11: 
                     12: This file is part of the LearningOnline Network with CAPA (LON-CAPA).
                     13: 
                     14: LON-CAPA is free software; you can redistribute it and/or modify
                     15: it under the terms of the GNU General Public License as published by
                     16: the Free Software Foundation; either version 2 of the License, or
                     17: (at your option) any later version.
                     18: 
                     19: LON-CAPA is distributed in the hope that it will be useful,
                     20: but WITHOUT ANY WARRANTY; without even the implied warranty of
                     21: MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
                     22: GNU General Public License for more details.
                     23: 
                     24: You should have received a copy of the GNU General Public License
                     25: along with LON-CAPA; if not, write to the Free Software
                     26: Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
                     27: 
                     28: /home/httpd/html/adm/gpl.txt
                     29: 
                     30: http://www.lon-capa.org/
                     31: 
                     32: -->
                     33: 
                     34: <!-- Default values must be defined before specific values. -->
                     35: <!-- If no 'dist' attribute is specified, then it is always installed. -->
                     36: <!-- If 'dist' attribute is set to  'default', then the specification. -->
                     37: <!-- is accepted if an alternative distribution is not requested or not -->
                     38: <!-- defined. -->
                     39: 
                     40: <piml>
1.6       harris41   41: <targetroot>/</targetroot>
1.2       harris41   42: <specialnotices>
                     43: <specialnotice>
                     44: </specialnotice>
                     45: </specialnotices>
1.1       harris41   46: <files>
                     47: <file>
                     48: <target dist='default'>/etc/httpd/conf/httpd.conf</target>
                     49: <note>This is always expected for any version of Apache</note>
                     50: <dependencies dist='default'>
                     51: /etc/httpd/conf/httpd.conf
                     52: </dependencies>
                     53: <perlscript mode='fg'>
                     54: unless (-e "<TARGET />") {
                     55: 	print 'ERROR! httpd.conf should exist! Are you missing the Apache '.
                     56: 		'software package';
                     57: }
                     58: else {
1.3       harris41   59:   $flag=0;
                     60:   open IN, "&lt;<TARGET />";
1.4       harris41   61:   while (&lt;IN&gt;) { if (/^\s*Include\s+conf\/srm.conf/) { $flag=1; } }
1.3       harris41   62:   close IN;
1.7       harris41   63:   unless ($flag==1) {
1.1       harris41   64: 	open OUT,"&gt;&gt;<TARGET />";
1.4       harris41   65: 	print OUT 'Include conf/srm.conf'."\n";
1.3       harris41   66: 	close OUT;
                     67:   }
                     68:   $flag=0;
                     69:   open IN, "&lt;<TARGET />";
1.4       harris41   70:   while (&lt;IN&gt;) { if (/^\s*Include\s+conf\/access.conf/) { $flag=1; } }
1.3       harris41   71:   close IN;
1.7       harris41   72:   unless ($flag==1) {
1.3       harris41   73: 	open OUT,"&gt;&gt;<TARGET />";
1.4       harris41   74: 	print OUT 'Include conf/access.conf'."\n";
1.1       harris41   75: 	close OUT;
1.3       harris41   76:   }
1.9       harris41   77:   my $eflag=0;
                     78:   $flag=0;
                     79:   open IN, "&lt;<TARGET />";
                     80:   while (&lt;IN&gt;) { 
                     81:     if (/^\s*Include\s+conf\/loncapa_apache.conf/) {
                     82:       $flag=1; 
                     83:     }
                     84:   }
                     85:   close IN;
                     86:   unless ($flag==1) {
                     87: 	open OUT,"&gt;&gt;<TARGET />";
                     88: 	print OUT 'Include conf/loncapa_apache.conf'."\n";
                     89: 	close OUT;
                     90:   }
1.3       harris41   91:   $flag=0;
                     92:   open IN, "&lt;<TARGET />";
                     93:   while (&lt;IN&gt;) { 
1.4       harris41   94:     if (/^\s*Include\s+conf\/loncapa.conf/) {
1.3       harris41   95:       $flag=1; 
                     96:     }
                     97:   }
                     98:   close IN;
1.7       harris41   99:   unless ($flag==1) {
1.3       harris41  100: 	open OUT,"&gt;&gt;<TARGET />";
1.4       harris41  101: 	print OUT 'Include conf/loncapa.conf'."\n";
1.3       harris41  102: 	close OUT;
                    103:   }
1.1       harris41  104: }
                    105: </perlscript>
                    106: </file>
                    107: <file>
                    108: <target dist='default'>/etc/httpd/conf/access.conf</target>
                    109: <note>This may or may not exist on a system depending on the version of
                    110: Apache</note>
                    111: <dependencies dist='default'>
                    112: /etc/httpd/conf/access.conf
                    113: </dependencies>
                    114: <perlscript mode='fg'>
1.2       harris41  115: unless (-e "<TARGET />") {
1.7       harris41  116: 	print &lt;&lt;END;
1.2       harris41  117: WARNING! access.conf is not currently present on your system.
                    118: This is either due to 
                    119: * you are missing the Apache software package,
                    120: * you have a newer version of Apache that does not
                    121:   ordinarily install an access.conf
                    122: * configuration files are installed in a directory location
                    123:   different than for <TARGET />
                    124: For backwards compatibility,
                    125: <TARGET /> is being generated.
                    126: END
                    127: }
1.3       harris41  128: my $flag=0;
                    129: open IN, "&lt;<TARGET />";
1.9       harris41  130: while (&lt;IN&gt;) { if (/^\s*Include\s+conf\/loncapa_apache.conf/)
                    131: 	 { $flag=1; } }
                    132: close IN;
                    133: unless ($flag==1) {
                    134: open OUT,"&gt;&gt;<TARGET />";
                    135: print OUT 'Include conf/loncapa_apache.conf'."\n";
                    136: close OUT;
1.10    ! harris41  137: }
1.9       harris41  138: $flag=0;
                    139: open IN, "&lt;<TARGET />";
1.4       harris41  140: while (&lt;IN&gt;) { if (/^\s*Include\s+conf\/loncapa.conf/) { $flag=1; } }
1.3       harris41  141: close IN;
1.7       harris41  142: unless ($flag==1) {
1.1       harris41  143: open OUT,"&gt;&gt;<TARGET />";
1.4       harris41  144: print OUT 'Include conf/loncapa.conf'."\n";
1.1       harris41  145: close OUT;
1.3       harris41  146: }
1.1       harris41  147: </perlscript>
                    148: </file>
                    149: <file>
                    150: <target dist='default'>/etc/httpd/conf/srm.conf</target>
                    151: <note>This may or may not exist on a system depending on the version of
                    152: Apache</note>
                    153: <dependencies dist='default'>
                    154: /etc/httpd/conf/srm.conf
                    155: </dependencies>
                    156: <perlscript mode='fg'>
1.2       harris41  157: unless (-e "<TARGET />") {
1.7       harris41  158: 	print &lt;&lt;END;
1.2       harris41  159: WARNING! srm.conf is not currently present on your system.
                    160: This is either due to 
                    161: * you are missing the Apache software package,
                    162: * you have a newer version of Apache that does not
                    163:   ordinarily install an srm.conf
                    164: * configuration files are installed in a directory location
                    165:   different than for <TARGET />
                    166: For backwards compatibility,
                    167: <TARGET /> is being generated.
                    168: END
                    169: }
1.3       harris41  170: my $flag=0;
1.9       harris41  171: open IN, "&lt;<TARGET />";
                    172: while (&lt;IN&gt;) { if (/^\s*Include\s+conf\/loncapa_apache.conf/)
                    173:  { $flag=1; } }
                    174: close IN;
                    175: unless ($flag==1) {
                    176: open OUT,"&gt;&gt;<TARGET />";
                    177: print OUT 'Include conf/loncapa_apache.conf'."\n";
                    178: close OUT;
1.10    ! harris41  179: }
1.9       harris41  180: $flag=0;
1.3       harris41  181: open IN, "&lt;<TARGET />";
1.4       harris41  182: while (&lt;IN&gt;) { if (/^\s*Include\s+conf\/loncapa.conf/) { $flag=1; } }
1.3       harris41  183: close IN;
1.7       harris41  184: unless ($flag==1) {
1.1       harris41  185: open OUT,"&gt;&gt;<TARGET />";
1.4       harris41  186: print OUT 'Include conf/loncapa.conf'."\n";
1.1       harris41  187: close OUT;
1.3       harris41  188: }
1.1       harris41  189: </perlscript>
                    190: </file>
                    191: </files>
                    192: </piml>

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>