--- loncom/LondConnection.pm 2004/09/14 11:46:29 1.34 +++ loncom/LondConnection.pm 2007/03/28 20:28:29 1.44 @@ -1,7 +1,7 @@ # This module defines and implements a class that represents # a connection to a lond daemon. # -# $Id: LondConnection.pm,v 1.34 2004/09/14 11:46:29 foxr Exp $ +# $Id: LondConnection.pm,v 1.44 2007/03/28 20:28:29 albertel Exp $ # # Copyright Michigan State University Board of Trustees # @@ -43,9 +43,7 @@ use LONCAPA::lonssl; my $DebugLevel=0; -my %hostshash; my %perlvar; -my $LocalDns = ""; # Need not be defined for managers. my $InsecureOk; # @@ -71,67 +69,9 @@ sub ReadConfig { my $perlvarref = read_conf('loncapa.conf'); %perlvar = %{$perlvarref}; - my $hoststab = read_hosts( - "$perlvar{lonTabDir}/hosts.tab") || - die "Can't read host table!!"; - %hostshash = %{$hoststab}; $ConfigRead = 1; - my $myLonCapaName = $perlvar{lonHostID}; - Debug(8, "My loncapa name is $myLonCapaName"); - - if(defined $hostshash{$myLonCapaName}) { - Debug(8, "My loncapa name is in hosthash"); - my @ConfigLine = @{$hostshash{$myLonCapaName}}; - $LocalDns = $ConfigLine[3]; - Debug(8, "Got local name $LocalDns"); - } $InsecureOk = $perlvar{loncAllowInsecure}; - - Debug(3, "ReadConfig - LocalDNS = $LocalDns"); -} - -# -# Read a foreign configuration. -# This sub is intended for the cases where the package -# will be read from outside the LonCAPA environment, in that case -# the client will need to explicitly provide: -# - A file in hosts.tab format. -# - Some idea of the 'lonCAPA' name of the local host (for building -# the encryption key). -# -# Parameters: -# MyHost - Name of this host as far as LonCAPA is concerned. -# Filename - Name of a hosts.tab formatted file that will be used -# to build up the hosts table. -# -sub ReadForeignConfig { - - my ($MyHost, $Filename) = @_; - - &Debug(4, "ReadForeignConfig $MyHost $Filename\n"); - - $perlvar{lonHostID} = $MyHost; # Rmember my host. - my $hosttab = read_hosts($Filename) || - die "Can't read hosts table!!"; - %hostshash = %{$hosttab}; - if($DebugLevel > 3) { - foreach my $host (keys %hostshash) { - print STDERR "host $host => $hostshash{$host}\n"; - } - } - $ConfigRead = 1; - - my $myLonCapaName = $perlvar{lonHostID}; - - if(defined $hostshash{$myLonCapaName}) { - my @ConfigLine = @{$hostshash{$myLonCapaName}}; - $LocalDns = $ConfigLine[3]; - } - $InsecureOk = $perlvar{loncAllowInsecure}; - - Debug(3, "ReadForeignConfig - LocalDNS = $LocalDns"); - } sub Debug { @@ -154,14 +94,18 @@ Dump the internal state of the object: F sub Dump { my $self = shift; my $level = shift; + my $now = time; + my $local = localtime($now); - if ($level <= $DebugLevel) { + if ($level >= $DebugLevel) { return; } + my $key; my $value; - print STDERR "Dumping LondConnectionObject:\n"; + print STDERR "[ $local ] Dumping LondConnectionObject:\n"; + print STDERR join(':',caller(1))."\n"; while(($key, $value) = each %$self) { print STDERR "$key -> $value\n"; } @@ -209,14 +153,13 @@ host the remote lond is on. This host is =cut sub new { - - my ($class, $Hostname, $Port) = @_; + my ($class, $DnsName, $Port, $lonid) = @_; if (!$ConfigRead) { ReadConfig(); $ConfigRead = 1; } - &Debug(4,$class."::new( ".$Hostname.",".$Port.")\n"); + &Debug(4,$class."::new( ".$DnsName.",".$Port.")\n"); # The host must map to an entry in the hosts table: # We connect to the dns host that corresponds to that @@ -224,27 +167,24 @@ sub new { # negotion. In the objec these become the Host and # LoncapaHim fields of the object respectively. # - if (!exists $hostshash{$Hostname}) { - &Debug(8, "No Such host $Hostname"); - return undef; # No such host!!! - } - my @ConfigLine = @{$hostshash{$Hostname}}; - my $DnsName = $ConfigLine[3]; # 4'th item is dns of host. - Debug(5, "Connecting to ".$DnsName); + # if it is me use loopback for connection + if ($DnsName eq &main::my_hostname()) { $DnsName="127.0.0.1"; } + Debug(9, "Connecting to $DnsName"); # Now create the object... my $self = { Host => $DnsName, - LoncapaHim => $Hostname, + LoncapaHim => $lonid, Port => $Port, State => "Initialized", AuthenticationMode => "", TransactionRequest => "", TransactionReply => "", + NextRequest => "", InformReadable => 0, InformWritable => 0, TimeoutCallback => undef, TransitionCallback => undef, Timeoutable => 0, - TimeoutValue => 30, + TimeoutValue => 3, TimeoutRemaining => 0, LocalKeyFile => "", CipherKey => "", @@ -256,16 +196,16 @@ sub new { Type => SOCK_STREAM, Proto => "tcp", Timeout => 3)) { + Debug(8, "Error? \n$@ \n$!"); return undef; # Inidicates the socket could not be made. } my $socket = $self->{Socket}; # For local use only. # If we are local, we'll first try local auth mode, otherwise, we'll try # the ssl auth mode: - Debug(8, "Connecting to $DnsName I am $LocalDns"); my $key; my $keyfile; - if ($DnsName eq $LocalDns) { + if ($DnsName eq '127.0.0.1') { $self->{AuthenticationMode} = "local"; ($key, $keyfile) = lonlocal::CreateKeyFile(); Debug(8, "Local key: $key, stored in $keyfile"); @@ -290,8 +230,7 @@ sub new { return undef; } - } - else { + } else { # Remote peer: I'd like to do ssl, but if my host key or certificates # are not all installed, my only choice is insecure, if that's # allowed: @@ -326,7 +265,6 @@ sub new { # # Set socket to nonblocking I/O. # - my $socket = $self->{Socket}; my $flags = fcntl($socket, F_GETFL,0); if(!$flags) { $socket->close; @@ -501,7 +439,8 @@ sub Readable { return 0; } elsif ($self->{State} eq "ReadingVersionString") { - $self->{LondVersion} = chomp($self->{TransactionReply}); + chomp($self->{TransactionReply}); + $self->{LondVersion} = $self->{TransactionReply}; $self->Transition("SetHost"); $self->{InformReadable} = 0; $self->{InformWritable} = 1; @@ -554,11 +493,23 @@ sub Readable { $answer = $self->Decrypt($answer); $self->{TransactionReply} = "$answer\n"; } - + # if we have a NextRequest do it immeadiately + if ($self->{NextRequest}) { + $self->{TransactionRequest} = $self->{NextRequest}; + undef( $self->{NextRequest} ); + $self->{TransactionReply} = ""; + $self->{InformWritable} = 1; + $self->{InformReadable} = 0; + $self->{Timeoutable} = 1; + $self->{TimeoutRemaining} = $self->{TimeoutValue}; + $self->Transition("SendingRequest"); + return 0; + } else { # finish the transaction - $self->ToIdle(); - return 0; + $self->ToIdle(); + return 0; + } } elsif ($self->{State} eq "Disconnected") { # No connection. return -1; } else { # Internal error: Invalid state. @@ -710,14 +661,26 @@ sub InitiateTransaction { return -1; # Error indicator. } # if the transaction is to be encrypted encrypt the data: + (my $sethost, my $server,$data)=split(/:/,$data,3); if($data =~ /^encrypt\:/) { $data = $self->Encrypt($data); } # Setup the trasaction - - $self->{TransactionRequest} = $data; + # currently no version of lond supports inlining the sethost + if ($self->PeerVersion() <= 321) { + if ($server ne $self->{LoncapaHim}) { + $self->{NextRequest} = $data; + $self->{TransactionRequest} = "$sethost:$server\n"; + $self->{LoncapaHim} = $server; + } else { + $self->{TransactionRequest} = $data; + } + } else { + $self->{LoncapaHim} = $server; + $self->{TransactionRequest} = "$sethost:$server:$data"; + } $self->{TransactionReply} = ""; $self->{InformWritable} = 1; $self->{InformReadable} = 0; @@ -1106,31 +1069,6 @@ sub CompleteInsecure { } } -=pod - -=head2 GetHostIterator - -Returns a hash iterator to the host information. Each get from -this iterator returns a reference to an array that contains -information read from the hosts configuration file. Array elements -are used as follows: - - [0] - LonCapa host name. - [1] - LonCapa domain name. - [2] - Loncapa role (e.g. library or access). - [3] - DNS name server hostname. - [4] - IP address (result of e.g. nslookup [3]). - [5] - Maximum connection count. - [6] - Idle timeout for reducing connection count. - [7] - Minimum connection count. - -=cut - -sub GetHostIterator { - - return HashIterator->new(\%hostshash); -} - ########################################################### # # The following is an unashamed kludge that is here to @@ -1142,7 +1080,7 @@ sub GetHostIterator { # -my $confdir='/etc/httpd/conf/'; +my @confdirs=('/etc/httpd/conf/','/etc/apache2/'); # ------------------- Subroutine read_conf: read LON-CAPA server configuration. # This subroutine reads PerlSetVar values out of specified web server @@ -1150,25 +1088,33 @@ my $confdir='/etc/httpd/conf/'; sub read_conf { my (@conf_files)=@_; - my %perlvar; - foreach my $filename (@conf_files,'loncapa_apache.conf') - { - if($DebugLevel > 3) { - print STDERR ("Going to read $confdir.$filename\n"); - } - open(CONFIG,'<'.$confdir.$filename) or - die("Can't read $confdir$filename"); - while (my $configline=) - { - if ($configline =~ /^[^\#]*PerlSetVar/) - { - my ($unused,$varname,$varvalue)=split(/\s+/,$configline); + my (%perlvar,%configdirs); + foreach my $filename (@conf_files,'loncapa_apache.conf') { + my $configdir = ''; + $configdirs{$filename} = [@confdirs]; + while ($configdir eq '' && @{$configdirs{$filename}} > 0) { + my $testdir = shift(@{$configdirs{$filename}}); + if (-e $testdir.$filename) { + $configdir = $testdir; + } + } + if ($configdir eq '') { + die("Couldn't find a directory containing $filename"); + } + if($DebugLevel > 3) { + print STDERR ("Going to read $configdir.$filename\n"); + } + open(CONFIG,'<'.$configdir.$filename) or + die("Can't read $configdir$filename"); + while (my $configline=) { + if ($configline =~ /^[^\#]*PerlSetVar/) { + my ($unused,$varname,$varvalue)=split(/\s+/,$configline); chomp($varvalue); $perlvar{$varname}=$varvalue; - } - } + } + } close(CONFIG); - } + } if($DebugLevel > 3) { print STDERR "Dumping perlvar:\n"; foreach my $var (keys %perlvar) { @@ -1179,44 +1125,6 @@ sub read_conf return $perlvarref; } -#---------------------- Subroutine read_hosts: Read a LON-CAPA hosts.tab -# formatted configuration file. -# -my $RequiredCount = 5; # Required item count in hosts.tab. -my $DefaultMaxCon = 5; # Default value for maximum connections. -my $DefaultIdle = 1000; # Default connection idle time in seconds. -my $DefaultMinCon = 0; # Default value for minimum connections. - -sub read_hosts { - my $Filename = shift; - my %HostsTab; - - open(CONFIG,'<'.$Filename) or die("Can't read $Filename"); - while (my $line = ) { - if (!($line =~ /^\s*\#/)) { - my @items = split(/:/, $line); - if(scalar @items >= $RequiredCount) { - if (scalar @items == $RequiredCount) { # Only required items: - $items[$RequiredCount] = $DefaultMaxCon; - } - if(scalar @items == $RequiredCount + 1) { # up through maxcon. - $items[$RequiredCount+1] = $DefaultIdle; - } - if(scalar @items == $RequiredCount + 2) { # up through idle. - $items[$RequiredCount+2] = $DefaultMinCon; - } - { - my @list = @items; # probably not needed but I'm unsure of - # about the scope of item so... - $HostsTab{$list[0]} = \@list; - } - } - } - } - close(CONFIG); - my $hostref = \%HostsTab; - return ($hostref); -} # # Get the version of our peer. Note that this is only well # defined if the state machine has hit the idle state at least @@ -1225,8 +1133,8 @@ sub read_hosts { # sub PeerVersion { my $self = shift; - - return $self->{LondVersion}; + my ($version) = ($self->{LondVersion} =~ /Revision: 1\.(\d+)/); + return $version; } 1; @@ -1422,8 +1330,4 @@ true if the current state requires a wri true if the current state requires timeout support. -=item GetHostIterator: - -Returns an iterator into the host file hash. - =cut