--- loncom/LondConnection.pm 2003/06/11 02:04:35 1.4 +++ loncom/LondConnection.pm 2010/11/11 15:01:13 1.49 @@ -1,7 +1,7 @@ # This module defines and implements a class that represents # a connection to a lond daemon. # -# $Id: LondConnection.pm,v 1.4 2003/06/11 02:04:35 foxr Exp $ +# $Id: LondConnection.pm,v 1.49 2010/11/11 15:01:13 raeburn Exp $ # # Copyright Michigan State University Board of Trustees # @@ -25,8 +25,10 @@ # # http://www.lon-capa.org/ # + package LondConnection; +use strict; use IO::Socket; use IO::Socket::INET; use IO::Handle; @@ -34,29 +36,50 @@ use IO::File; use Fcntl; use POSIX; use Crypt::IDEA; -use LONCAPA::Configuration; -use LONCAPA::HashIterator; +use LONCAPA::lonlocal; +use LONCAPA::lonssl; + + -my $DebugLevel=4; + +my $DebugLevel=0; +my %perlvar; +my $InsecureOk; + +# +# Set debugging level +# +sub SetDebug { + $DebugLevel = shift; +} + +# +# The config read is done in this way to support the read of +# the non-default configuration file in the +# event we are being used outside of loncapa. +# + +my $ConfigRead = 0; # Read the configuration file for apache to get the perl -# variable set. +# variables set. -my $perlvarref = LONCAPA::Configuration::read_conf('loncapa.conf'); -my %perlvar = %{$perlvarref}; -my $hoststab = - LONCAPA::Configuration::read_hosts( - "$perlvar{'lonTabDir'}/hosts.tab") || - die "Can't read host table!!"; -my %hostshash = %{$hoststab}; +sub ReadConfig { + Debug(8, "ReadConfig called"); -close(CONFIG); + my $perlvarref = read_conf('loncapa.conf'); + %perlvar = %{$perlvarref}; + $ConfigRead = 1; + + $InsecureOk = $perlvar{loncAllowInsecure}; +} sub Debug { - my $level = shift; - my $message = shift; + + my ($level, $message) = @_; + if ($level < $DebugLevel) { - print($message."\n"); + print STDERR ($message."\n"); } } @@ -64,17 +87,29 @@ sub Debug { =head2 Dump -Dump the internal state of the object: For debugging purposes. +Dump the internal state of the object: For debugging purposes, to stderr. =cut sub Dump { my $self = shift; - print "Dumping LondConnectionObject:\n"; + my $level = shift; + my $now = time; + my $local = localtime($now); + + if ($level >= $DebugLevel) { + return; + } + + + my $key; + my $value; + print STDERR "[ $local ] Dumping LondConnectionObject:\n"; + print STDERR join(':',caller(1))."\n"; while(($key, $value) = each %$self) { - print "$key -> $value\n"; + print STDERR "$key -> $value\n"; } - print "-------------------------------\n"; + print STDERR "-------------------------------\n"; } =pod @@ -86,8 +121,9 @@ old state. =cut sub Transition { - my $self = shift; - my $newstate = shift; + + my ($self, $newstate) = @_; + my $oldstate = $self->{State}; $self->{State} = $newstate; $self->{TimeoutRemaining} = $self->{TimeoutValue}; @@ -97,6 +133,7 @@ sub Transition { } + =pod =head2 new @@ -116,10 +153,13 @@ host the remote lond is on. This host is =cut sub new { - my $class = shift; # class name. - my $Hostname = shift; # Name of host to connect to. - my $Port = shift; # Port to connect - &Debug(4,$class."::new( ".$Hostname.",".$Port.")\n"); + my ($class, $DnsName, $Port, $lonid) = @_; + + if (!$ConfigRead) { + ReadConfig(); + $ConfigRead = 1; + } + &Debug(4,$class."::new( ".$DnsName.",".$Port.",".$lonid.")\n"); # The host must map to an entry in the hosts table: # We connect to the dns host that corresponds to that @@ -127,58 +167,119 @@ sub new { # negotion. In the objec these become the Host and # LoncapaHim fields of the object respectively. # - if (!exists $hostshash{$Hostname}) { - return undef; # No such host!!! - } - my @ConfigLine = @{$hostshash{$Hostname}}; - my $DnsName = $ConfigLine[3]; # 4'th item is dns of host. - Debug(5, "Connecting to ".$DnsName); + # if it is me use loopback for connection + if ($DnsName eq &main::my_hostname()) { $DnsName="127.0.0.1"; } + Debug(9, "Connecting to $DnsName"); # Now create the object... my $self = { Host => $DnsName, - LoncapaHim => $Hostname, - Port => $Port, - State => "Initialized", - TransactionRequest => "", - TransactionReply => "", - InformReadable => 0, - InformWritable => 0, - TimeoutCallback => undef, - TransitionCallback => undef, - Timeoutable => 0, - TimeoutValue => 60, - TimeoutRemaining => 0, - CipherKey => "", - Cipher => undef}; + LoncapaHim => $lonid, + Port => $Port, + State => "Initialized", + AuthenticationMode => "", + TransactionRequest => "", + TransactionReply => "", + NextRequest => "", + InformReadable => 0, + InformWritable => 0, + TimeoutCallback => undef, + TransitionCallback => undef, + Timeoutable => 0, + TimeoutValue => 30, + TimeoutRemaining => 0, + LocalKeyFile => "", + CipherKey => "", + LondVersion => "Unknown", + Cipher => undef}; bless($self, $class); unless ($self->{Socket} = IO::Socket::INET->new(PeerHost => $self->{Host}, PeerPort => $self->{Port}, Type => SOCK_STREAM, - Proto => "tcp")) { + Proto => "tcp", + Timeout => 3)) { + Debug(8, "Error? \n$@ \n$!"); return undef; # Inidicates the socket could not be made. } + my $socket = $self->{Socket}; # For local use only. + # If we are local, we'll first try local auth mode, otherwise, we'll try + # the ssl auth mode: + + my $key; + my $keyfile; + if ($DnsName eq '127.0.0.1') { + $self->{AuthenticationMode} = "local"; + ($key, $keyfile) = lonlocal::CreateKeyFile(); + Debug(8, "Local key: $key, stored in $keyfile"); + + # If I can't make the key file fall back to insecure if + # allowed...else give up right away. + + if(!(defined $key) || !(defined $keyfile)) { + if($InsecureOk) { + $self->{AuthenticationMode} = "insecure"; + $self->{TransactionRequest} = "init\n"; + } + else { + $socket->close; + return undef; + } + } + $self->{TransactionRequest} = "init:local:$keyfile\n"; + Debug(9, "Init string is init:local:$keyfile"); + if(!$self->CreateCipher($key)) { # Nothing's going our way... + $socket->close; + return undef; + } + + } else { + # Remote peer: I'd like to do ssl, but if my host key or certificates + # are not all installed, my only choice is insecure, if that's + # allowed: + + my ($ca, $cert) = lonssl::CertificateFile; + my $sslkeyfile = lonssl::KeyFile; + + if((defined $ca) && (defined $cert) && (defined $sslkeyfile)) { + + $self->{AuthenticationMode} = "ssl"; + $self->{TransactionRequest} = "init:ssl:$perlvar{'lonVersion'}\n"; + } else { + if($InsecureOk) { # Allowed to do insecure: + $self->{AuthenticationMode} = "insecure"; + $self->{TransactionRequest} = "init::$perlvar{'lonVersion'}\n"; + } + else { # Not allowed to do insecure... + $socket->close; + return undef; + } + } + } + # # We're connected. Set the state, and the events we'll accept: # $self->Transition("Connected"); $self->{InformWritable} = 1; # When socket is writable we send init - $self->{TransactionRequest} = "init\n"; + $self->{Timeoutable} = 1; # Timeout allowed during startup negotiation. + # # Set socket to nonblocking I/O. # - my $socket = $self->{Socket}; - $flags = fcntl($socket->fileno, F_GETFL,0); - if($flags == -1) { + my $flags = fcntl($socket, F_GETFL,0); + if(!$flags) { $socket->close; return undef; } - if(fcntl($socket, F_SETFL, $flags | O_NONBLOCK) == -1) { + if(!fcntl($socket, F_SETFL, $flags | O_NONBLOCK)) { $socket->close; return undef; } # return the object : + Debug(9, "Initial object state: "); + $self->Dump(9); + return $self; } @@ -212,14 +313,23 @@ sub Readable { my $self = shift; my $socket = $self->{Socket}; my $data = ''; - my $rv = $socket->recv($data, POSIX::BUFSIZ, 0); + my $rv; + my $ConnectionMode = $self->{AuthenticationMode}; + + if ($socket) { + eval { + $rv = $socket->recv($data, POSIX::BUFSIZ, 0); + } + } else { + $self->Transition("Disconnected"); + return -1; + } my $errno = $! + 0; # Force numeric context. - unless (defined($rv) && length($data)) { # Read failed, + unless (defined($rv) && length $data) {# Read failed, if(($errno == POSIX::EWOULDBLOCK) || ($errno == POSIX::EAGAIN) || - ($errno == POSIX::EINTR) || - ($errno == 0)) { + ($errno == POSIX::EINTR)) { return 0; } @@ -234,53 +344,144 @@ sub Readable { &Debug(9,"Received from host: ".$data); $self->{TransactionReply} .= $data; - if($self->{TransactionReply} =~ /(.*\n)/) { + if($self->{TransactionReply} =~ m/\n$/) { &Debug(8,"Readable End of line detected"); + + if ($self->{State} eq "Initialized") { # We received the challenge: - if($self->{TransactionReply} eq "refused") { # Remote doesn't have - - $self->Transition("Disconnected"); # in host tables. + # Our init was replied to. What happens next depends both on + # the actual init we sent (AuthenticationMode member data) + # and the response: + # AuthenticationMode == local: + # Response ok: The key has been exchanged and + # the key file destroyed. We can jump + # into setting the host and requesting the + # Later we'll also bypass key exchange. + # Response digits: + # Old style lond. Delete the keyfile. + # If allowed fall back to insecure mode. + # else close connection and fail. + # Response other: + # Failed local auth + # Close connection and fail. + # + # AuthenticationMode == ssl: + # Response ok:ssl + # Response digits: + # Response other: + # Authentication mode == insecure + # Response digits + # Response other: + + my $Response = $self->{TransactionReply}; + if($ConnectionMode eq "local") { + if($Response =~ /^ok:local/) { # Good local auth. + $self->ToVersionRequest(); + return 0; + } + elsif ($Response =~/^[0-9]+/) { # Old style lond. + return $self->CompleteInsecure(); + + } + else { # Complete flop + &Debug(3, "init:local : unrecognized reply"); + $self->Transition("Disconnected"); + $socket->close; + return -1; + } + } + elsif ($ConnectionMode eq "ssl") { + if($Response =~ /^ok:ssl/) { # Good ssl... + if($self->ExchangeKeysViaSSL()) { # Success skip to vsn stuff + # Need to reset to non blocking: + + my $flags = fcntl($socket, F_GETFL, 0); + fcntl($socket, F_SETFL, $flags | O_NONBLOCK); + $self->ToVersionRequest(); + return 0; + } + else { # Failed in ssl exchange. + &Debug(3,"init:ssl failed key negotiation!"); + $self->Transition("Disconnected"); + $socket->close; + return -1; + } + } + elsif ($Response =~ /^[0-9]+/) { # Old style lond. + return $self->CompleteInsecure(); + } + else { # Complete flop + } + } + elsif ($ConnectionMode eq "insecure") { + if($self->{TransactionReply} eq "refused\n") { # Remote doesn't have + + $self->Transition("Disconnected"); # in host tables. + $socket->close(); + return -1; + + } + return $self->CompleteInsecure(); + } + else { + &Debug(1,"Authentication mode incorrect"); + die "BUG!!! LondConnection::Readable invalid authmode"; + } + + + } elsif ($self->{State} eq "ChallengeReplied") { + if($self->{TransactionReply} ne "ok\n") { + $self->Transition("Disconnected"); $socket->close(); return -1; } + $self->ToVersionRequest(); + return 0; - &Debug(8," Transition out of Initialized"); - $self->{TransactionRequest} = $self->{TransactionReply}; - $self->{InformWritable} = 1; - $self->{InformReadable} = 0; - $self->Transition("ChallengeReceived"); - $self->{TimeoutRemaining} = $self->{TimeoutValue}; + } elsif ($self->{State} eq "ReadingVersionString") { + chomp($self->{TransactionReply}); + $self->{LondVersion} = $self->{TransactionReply}; + $self->Transition("SetHost"); + $self->{InformReadable} = 0; + $self->{InformWritable} = 1; + my $peer = $self->{LoncapaHim}; + $self->{TransactionRequest}= "sethost:$peer\n"; return 0; - } elsif ($self->{State} eq "ChallengeReplied") { # should be ok. - if($self->{TransactionReply} != "ok\n") { + } elsif ($self->{State} eq "HostSet") { # should be ok. + if($self->{TransactionReply} ne "ok\n") { $self->Transition("Disconnected"); $socket->close(); return -1; } - $self->Transition("RequestingKey"); - $self->{InformReadable} = 0; - $self->{InformWritable} = 1; - $self->{TransactionRequest} = "ekey\n"; - return 0; + # If the auth mode is insecure we must still + # exchange session keys. Otherwise, + # we can just transition to idle. + + if($ConnectionMode eq "insecure") { + $self->Transition("RequestingKey"); + $self->{InformReadable} = 0; + $self->{InformWritable} = 1; + $self->{TransactionRequest} = "ekey\n"; + return 0; + } + else { + $self->ToIdle(); + return 0; + } } elsif ($self->{State} eq "ReceivingKey") { my $buildkey = $self->{TransactionReply}; my $key = $self->{LoncapaHim}.$perlvar{'lonHostID'}; $key=~tr/a-z/A-Z/; $key=~tr/G-P/0-9/; $key=~tr/Q-Z/0-9/; - $key=$key.$buildkey.$key.$buildkey.$key.$buildkey; - $key=substr($key,0,32); - my $cipherkey=pack("H32",$key); - $self->{Cipher} = new IDEA $cipherkey; - if($self->{Cipher} == undef) { + $key =$key.$buildkey.$key.$buildkey.$key.$buildkey; + $key = substr($key,0,32); + if(!$self->CreateCipher($key)) { $self->Transition("Disconnected"); $socket->close(); return -1; } else { - $self->Transition("Idle"); - $self->{InformWritable} = 0; - $self->{InformReadable} = 0; - $self->{Timeoutable} = 0; + $self->ToIdle(); return 0; } } elsif ($self->{State} eq "ReceivingReply") { @@ -290,16 +491,25 @@ sub Readable { my $answer = $self->{TransactionReply}; if($answer =~ /^enc\:/) { $answer = $self->Decrypt($answer); - $self->{TransactionReply} = $answer; + $self->{TransactionReply} = "$answer\n"; } - + # if we have a NextRequest do it immeadiately + if ($self->{NextRequest}) { + $self->{TransactionRequest} = $self->{NextRequest}; + undef( $self->{NextRequest} ); + $self->{TransactionReply} = ""; + $self->{InformWritable} = 1; + $self->{InformReadable} = 0; + $self->{Timeoutable} = 1; + $self->{TimeoutRemaining} = $self->{TimeoutValue}; + $self->Transition("SendingRequest"); + return 0; + } else { # finish the transaction - $self->{InformWritable} = 0; - $self->{InformReadable} = 0; - $self->{Timeoutable} = 0; - $self->Transition("Idle"); - return 0; + $self->ToIdle(); + return 0; + } } elsif ($self->{State} eq "Disconnected") { # No connection. return -1; } else { # Internal error: Invalid state. @@ -328,7 +538,18 @@ Returns 0 if successful, or -1 if not. sub Writable { my $self = shift; # Get reference to the object. my $socket = $self->{Socket}; - my $nwritten = $socket->send($self->{TransactionRequest}, 0); + my $nwritten; + if ($socket) { + eval { + $nwritten = $socket->send($self->{TransactionRequest}, 0); + } + } else { + # For whatever reason, there's no longer a socket left. + + + $self->Transition("Disconnected"); + return -1; + } my $errno = $! + 0; unless (defined $nwritten) { if($errno != POSIX::EINTR) { @@ -337,41 +558,46 @@ sub Writable { } } - if (($rv >= 0) || + if (($nwritten >= 0) || ($errno == POSIX::EWOULDBLOCK) || ($errno == POSIX::EAGAIN) || ($errno == POSIX::EINTR) || ($errno == 0)) { + $self->{TimeoutRemaining} = $self->{TimeoutValue}; substr($self->{TransactionRequest}, 0, $nwritten) = ""; # rmv written part - if(length $self->{TransactionRequest} == 0) { - $self->{InformWritable} = 0; - $self->{InformReadable} = 1; - $self->{TransactionReply} = ''; - # - # Figure out the next state: - # - if($self->{State} eq "Connected") { - $self->Transition("Initialized"); - } elsif($self->{State} eq "ChallengeReceived") { - $self->Transition("ChallengeReplied"); - } elsif($self->{State} eq "RequestingKey") { - $self->Transition("ReceivingKey"); - $self->{InformWritable} = 0; - $self->{InformReadable} = 1; - $self->{TransactionReply} = ''; - } elsif ($self->{State} eq "SendingRequest") { - $self->Transition("ReceivingReply"); - $self->{TimeoutRemaining} = $self->{TimeoutValue}; - } elsif ($self->{State} eq "Disconnected") { - return -1; - } - return 0; - } - } else { # The write failed (e.g. partner disconnected). - $self->Transition("Disconnected"); - $socket->close(); - return -1; - } + if(length $self->{TransactionRequest} == 0) { + $self->{InformWritable} = 0; + $self->{InformReadable} = 1; + $self->{TransactionReply} = ''; + # + # Figure out the next state: + # + if($self->{State} eq "Connected") { + $self->Transition("Initialized"); + } elsif($self->{State} eq "ChallengeReceived") { + $self->Transition("ChallengeReplied"); + } elsif($self->{State} eq "RequestingVersion") { + $self->Transition("ReadingVersionString"); + } elsif ($self->{State} eq "SetHost") { + $self->Transition("HostSet"); + } elsif($self->{State} eq "RequestingKey") { + $self->Transition("ReceivingKey"); +# $self->{InformWritable} = 0; +# $self->{InformReadable} = 1; +# $self->{TransactionReply} = ''; + } elsif ($self->{State} eq "SendingRequest") { + $self->Transition("ReceivingReply"); + $self->{TimeoutRemaining} = $self->{TimeoutValue}; + } elsif ($self->{State} eq "Disconnected") { + return -1; + } + return 0; + } + } else { # The write failed (e.g. partner disconnected). + $self->Transition("Disconnected"); + $socket->close(); + return -1; + } } =pod @@ -427,8 +653,8 @@ timout, and to request writability notif =cut sub InitiateTransaction { - my $self = shift; - my $data = shift; + + my ($self, $data) = @_; Debug(1, "initiating transaction: ".$data); if($self->{State} ne "Idle") { @@ -436,14 +662,26 @@ sub InitiateTransaction { return -1; # Error indicator. } # if the transaction is to be encrypted encrypt the data: + (my $sethost, my $server,$data)=split(/:/,$data,3); if($data =~ /^encrypt\:/) { $data = $self->Encrypt($data); } # Setup the trasaction - - $self->{TransactionRequest} = $data; + # currently no version of lond supports inlining the sethost + if ($self->PeerVersion() <= 321) { + if ($server ne $self->{LoncapaHim}) { + $self->{NextRequest} = $data; + $self->{TransactionRequest} = "$sethost:$server\n"; + $self->{LoncapaHim} = $server; + } else { + $self->{TransactionRequest} = $data; + } + } else { + $self->{LoncapaHim} = $server; + $self->{TransactionRequest} = "$sethost:$server:$data"; + } $self->{TransactionReply} = ""; $self->{InformWritable} = 1; $self->{InformReadable} = 0; @@ -479,8 +717,9 @@ established callback or undef if there w =cut sub SetTimeoutCallback { - my $self = shift; - my $callback = shift; + + my ($self, $callback) = @_; + my $oldCallback = $self->{TimeoutCallback}; $self->{TimeoutCallback} = $callback; return $oldCallback; @@ -488,6 +727,28 @@ sub SetTimeoutCallback { =pod +=head2 Shutdown: + +Shuts down the socket. + +=cut + +sub Shutdown { + my $self = shift; + my $socket = $self->GetSocket(); + Debug(5,"socket is -$socket-"); + if ($socket) { + # Ask lond to exit too. Non blocking so + # there is no cost for failure. + eval { + $socket->send("exit\n", 0); + $socket->shutdown(2); + } + } +} + +=pod + =head2 GetState selector for the object state. @@ -512,6 +773,7 @@ sub GetSocket { return $self->{Socket}; } + =pod =head2 WantReadable @@ -585,8 +847,8 @@ The output string can be directly sent t =cut sub Encrypt { - my $self = shift; # Reference to the object. - my $request = shift; # Text to send. + + my ($self, $request) = @_; # Split the encrypt: off the request and figure out it's length. @@ -628,8 +890,8 @@ Decrypt a response from the server. The =cut sub Decrypt { - my $self = shift; # Recover reference to object - my $encrypted = shift; # This is the encrypted data. + + my ($self, $encrypted) = @_; # Bust up the response into length, and encryptedstring: @@ -639,7 +901,7 @@ sub Decrypt { # Decode the data in 8 byte blocks. The string is encoded # as hex digits so there are two characters per byte: - $decrpyted = ""; + my $decrypted = ""; for(my $index = 0; $index < length($EncryptedString); $index += 16) { $decrypted .= $self->{Cipher}->decrypt( @@ -652,34 +914,228 @@ sub Decrypt { # $length tells us the actual length of the decrypted string: $decrypted = substr($decrypted, 0, $length); + Debug(9, "Decrypted $EncryptedString to $decrypted"); return $decrypted; } +# ToIdle +# Called to transition to idle... done enough it's worth subbing +# off to ensure it's always done right!! +# +sub ToIdle { + my $self = shift; -=pod + $self->Transition("Idle"); + $self->{InformWritiable} = 0; + $self->{InformReadable} = 0; + $self->{Timeoutable} = 0; +} + +# ToVersionRequest +# Called to transition to "RequestVersion" also done a few times +# so worth subbing out. +# +sub ToVersionRequest { + my $self = shift; + + $self->Transition("RequestingVersion"); + $self->{InformReadable} = 0; + $self->{InformWritable} = 1; + $self->{TransactionRequest} = "version\n"; + +} +# +# CreateCipher +# Given a cipher key stores the key in the object context, +# creates the cipher object, (stores that in object context), +# This is done a couple of places, so it's worth factoring it out. +# +# Parameters: +# (self) +# key - The Cipher key. +# +# Returns: +# 0 - Failure to create IDEA cipher. +# 1 - Success. +# +sub CreateCipher { + my ($self, $key) = @_; # According to coding std. + + $self->{CipherKey} = $key; # Save the text key... + my $packedkey = pack ("H32", $key); + my $cipher = new IDEA $packedkey; + if($cipher) { + $self->{Cipher} = $cipher; + Debug("Cipher created dumping socket: "); + $self->Dump(9); + return 1; + } + else { + return 0; + } +} +# ExchangeKeysViaSSL +# Called to do cipher key exchange via SSL. +# The socket is promoted to an SSL socket. If that's successful, +# we read out cipher key through the socket and create an IDEA +# cipher object. +# Parameters: +# (self) +# Returns: +# true - Success. +# false - Failure. +# +# Assumptions: +# 1. The ssl session setup has timeout logic built in so we don't +# have to worry about DOS attacks at that stage. +# 2. If the ssl session gets set up we are talking to a legitimate +# lond so again we don't have to worry about DOS attacks. +# All this allows us just to call +sub ExchangeKeysViaSSL { + my $self = shift; + my $socket = $self->{Socket}; -=head2 GetHostIterator + # Get our signed certificate, the certificate authority's + # certificate and our private key file. All of these + # are needed to create the ssl connection. + + my ($SSLCACertificate, + $SSLCertificate) = lonssl::CertificateFile(); + my $SSLKey = lonssl::KeyFile(); + + # Promote our connection to ssl and read the key from lond. + + my $SSLSocket = lonssl::PromoteClientSocket($socket, + $SSLCACertificate, + $SSLCertificate, + $SSLKey); + if(defined $SSLSocket) { + my $key = <$SSLSocket>; + lonssl::Close($SSLSocket); + if($key) { + chomp($key); # \n is not part of the key. + return $self->CreateCipher($key); + } + else { + Debug(3, "Failed to read ssl key"); + return 0; + } + } + else { + # Failed!! + Debug(3, "Failed to negotiate SSL connection!"); + return 0; + } + # should not get here + return 0; -Returns a hash iterator to the host information. Each get from -this iterator returns a reference to an array that contains -information read from the hosts configuration file. Array elements -are used as follows: +} - [0] - LonCapa host name. - [1] - LonCapa domain name. - [2] - Loncapa role (e.g. library or access). - [3] - DNS name server hostname. - [4] - IP address (result of e.g. nslooup [3]). - [5] - Maximum connection count. - [6] - Idle timeout for reducing connection count. - [7] - Minimum connection count. -=cut -sub GetHostIterator { +# +# CompleteInsecure: +# This function is called to initiate the completion of +# insecure challenge response negotiation. +# To do this, we copy the challenge string to the transaction +# request, flip to writability and state transition to +# ChallengeReceived.. +# All this is only possible if InsecureOk is true. +# Parameters: +# (self) - This object's context hash. +# Return: +# 0 - Ok to transition. +# -1 - Not ok to transition (InsecureOk not ok). +# +sub CompleteInsecure { + my $self = shift; + if($InsecureOk) { + $self->{AuthenticationMode} = "insecure"; + &Debug(8," Transition out of Initialized:insecure"); + $self->{TransactionRequest} = $self->{TransactionReply}; + $self->{InformWritable} = 1; + $self->{InformReadable} = 0; + $self->Transition("ChallengeReceived"); + $self->{TimeoutRemaining} = $self->{TimeoutValue}; + return 0; + + + } + else { + &Debug(3, "Insecure key negotiation disabled!"); + my $socket = $self->{Socket}; + $socket->close; + return -1; + } +} + +########################################################### +# +# The following is an unashamed kludge that is here to +# allow LondConnection to be used outside of the +# loncapa environment (e.g. by lonManage). +# +# This is a textual inclusion of pieces of the +# Configuration.pm module. +# - return HashIterator->new(\%hostshash); + +my @confdirs=('/etc/httpd/conf/','/etc/apache2/'); + +# ------------------- Subroutine read_conf: read LON-CAPA server configuration. +# This subroutine reads PerlSetVar values out of specified web server +# configuration files. +sub read_conf + { + my (@conf_files)=@_; + my (%perlvar,%configdirs); + foreach my $filename (@conf_files,'loncapa_apache.conf') { + my $configdir = ''; + $configdirs{$filename} = [@confdirs]; + while ($configdir eq '' && @{$configdirs{$filename}} > 0) { + my $testdir = shift(@{$configdirs{$filename}}); + if (-e $testdir.$filename) { + $configdir = $testdir; + } + } + if ($configdir eq '') { + die("Couldn't find a directory containing $filename"); + } + if($DebugLevel > 3) { + print STDERR ("Going to read $configdir.$filename\n"); + } + open(CONFIG,'<'.$configdir.$filename) or + die("Can't read $configdir$filename"); + while (my $configline=) { + if ($configline =~ /^[^\#]*PerlSetVar/) { + my ($unused,$varname,$varvalue)=split(/\s+/,$configline); + chomp($varvalue); + $perlvar{$varname}=$varvalue; + } + } + close(CONFIG); + } + if($DebugLevel > 3) { + print STDERR "Dumping perlvar:\n"; + foreach my $var (keys %perlvar) { + print STDERR "$var = $perlvar{$var}\n"; + } + } + my $perlvarref=\%perlvar; + return $perlvarref; +} + +# +# Get the version of our peer. Note that this is only well +# defined if the state machine has hit the idle state at least +# once (well actually if it has transitioned out of +# ReadingVersionString The member data LondVersion is returned. +# +sub PeerVersion { + my $self = shift; + my ($version) = ($self->{LondVersion} =~ /Revision: 1\.(\d+)/); + return $version; } 1; @@ -755,6 +1211,17 @@ Socket open on the connection. The current state. +=item AuthenticationMode + +How authentication is being done. This can be any of: + + o local - Authenticate via a key exchanged in a file. + o ssl - Authenticate via a key exchaned through a temporary ssl tunnel. + o insecure - Exchange keys in an insecure manner. + +insecure is only allowed if the configuration parameter loncAllowInsecure +is nonzero. + =item TransactionRequest The request being transmitted. @@ -838,6 +1305,10 @@ peer (assumes the text is a command). Decrypts a block of text according to the cipher negotiated with the peer (assumes the block was a reply. +=item Shutdown: + +Shuts off the socket. + =head2 The following are selector member functions: =item GetState: @@ -860,8 +1331,4 @@ true if the current state requires a wri true if the current state requires timeout support. -=item GetHostIterator: - -Returns an iterator into the host file hash. - =cut