[BACK]Return to LondConnection.pm CVS log [TXT] [DIR] Up to [LON-CAPA] / loncom

Diff for /loncom/LondConnection.pm between versions 1.41 and 1.55

version 1.41, 2006/08/11 20:07:52 version 1.55, 2017/10/20 20:20:21
Line 40  use LONCAPA::lonlocal; Line 40  use LONCAPA::lonlocal;
 use LONCAPA::lonssl;  use LONCAPA::lonssl;
   
   
   
   
 my $DebugLevel=0;  my $DebugLevel=0;
 my %hostshash;  
 my %perlvar;  my %perlvar;
 my $LocalDns = ""; # Need not be defined for managers.  my %secureconf;
   my %hosttypes; 
 my $InsecureOk;  my $InsecureOk;
   
 #  #
Line 71  sub ReadConfig { Line 69  sub ReadConfig {
   
     my $perlvarref = read_conf('loncapa.conf');      my $perlvarref = read_conf('loncapa.conf');
     %perlvar    = %{$perlvarref};      %perlvar    = %{$perlvarref};
     my $hoststab   = read_hosts(  
  "$perlvar{lonTabDir}/hosts.tab") ||   
  die "Can't read host table!!";  
     %hostshash  = %{$hoststab};  
     $ConfigRead = 1;      $ConfigRead = 1;
       
     my $myLonCapaName = $perlvar{lonHostID};  
     Debug(8, "My loncapa name is $myLonCapaName");  
       
     if(defined $hostshash{$myLonCapaName}) {  
  Debug(8, "My loncapa name is in hosthash");  
  my @ConfigLine = @{$hostshash{$myLonCapaName}};  
  $LocalDns = $ConfigLine[3];  
  Debug(8, "Got local name $LocalDns");  
     }  
     $InsecureOk = $perlvar{loncAllowInsecure};  
       
     Debug(3, "ReadConfig - LocalDNS = $LocalDns");  
 }  
   
 #  
 #  Read a foreign configuration.  
 #  This sub is intended for the cases where the package  
 #  will be read from outside the LonCAPA environment, in that case  
 #  the client will need to explicitly provide:  
 #   - A file in hosts.tab format.  
 #   - Some idea of the 'lonCAPA' name of the local host (for building  
 #     the encryption key).  
 #  
 #  Parameters:  
 #      MyHost   - Name of this host as far as LonCAPA is concerned.  
 #      Filename - Name of a hosts.tab formatted file that will be used  
 #                 to build up the hosts table.  
 #  
 sub ReadForeignConfig {  
   
     my ($MyHost, $Filename) = @_;  
   
     &Debug(4, "ReadForeignConfig $MyHost $Filename\n");      $InsecureOk = $perlvar{loncAllowInsecure};
   
     $perlvar{lonHostID} = $MyHost; # Rmember my host.      unless (lonssl::Read_Connect_Config(\%secureconf,\%perlvar) eq 'ok') {
     my $hosttab = read_hosts($Filename) ||          Debug(1,"Failed to retrieve secureconf hash.\n");
  die "Can't read hosts table!!";  
     %hostshash = %{$hosttab};  
     if($DebugLevel > 3) {  
  foreach my $host (keys %hostshash) {  
     print STDERR "host $host => $hostshash{$host}\n";  
  }  
     }      }
     $ConfigRead = 1;      unless (lonssl::Read_Host_Types(\%hosttypes,\%perlvar) eq 'ok') {
           Debug(1,"Failed to retrieve hosttypes hash.\n");
     my $myLonCapaName = $perlvar{lonHostID};  
       
     if(defined $hostshash{$myLonCapaName}) {  
  my @ConfigLine = @{$hostshash{$myLonCapaName}};  
  $LocalDns = $ConfigLine[3];  
     }      }
     $InsecureOk = $perlvar{loncAllowInsecure};  }
       
     Debug(3, "ReadForeignConfig  - LocalDNS = $LocalDns");  
   
   sub ResetReadConfig {
       $ConfigRead = 0;
 }  }
   
 sub Debug {  sub Debug {
Line 213  host the remote lond is on. This host is Line 164  host the remote lond is on. This host is
 =cut  =cut
   
 sub new {  sub new {
     my ($class, $DnsName, $Port) = @_;      my ($class, $DnsName, $Port, $lonid) = @_;
   
     if (!$ConfigRead) {      if (!$ConfigRead) {
  ReadConfig();   ReadConfig();
  $ConfigRead = 1;   $ConfigRead = 1;
     }      }
     &Debug(4,$class."::new( ".$DnsName.",".$Port.")\n");      &Debug(4,$class."::new( ".$DnsName.",".$Port.",".$lonid.")\n");
   
     # The host must map to an entry in the hosts table:      # The host must map to an entry in the hosts table:
     #  We connect to the dns host that corresponds to that      #  We connect to the dns host that corresponds to that
Line 227  sub new { Line 178  sub new {
     #  negotion.  In the objec these become the Host and      #  negotion.  In the objec these become the Host and
     #  LoncapaHim fields of the object respectively.      #  LoncapaHim fields of the object respectively.
     #      #
     if (!exists $hostshash{$DnsName}) {  
  &Debug(8, "No Such host $DnsName");  
  return undef; # No such host!!!  
     }  
     my @ConfigLine = @{$hostshash{$DnsName}};  
     my $Hostname    = $ConfigLine[0]; # 0'th item is the msu id of host.  
     Debug(5, "Connecting to ".$DnsName);  
     # if it is me use loopback for connection      # if it is me use loopback for connection
     if ($DnsName eq $LocalDns) { $DnsName="127.0.0.1"; }      if ($DnsName eq &main::my_hostname()) { $DnsName="127.0.0.1"; }
     Debug(8, "Connecting to $DnsName I am $LocalDns");      Debug(9, "Connecting to $DnsName");
     # Now create the object...      # Now create the object...
     my $self     = { Host               => $DnsName,      my $self     = { Host               => $DnsName,
                      LoncapaHim         => $Hostname,                       LoncapaHim         => $lonid,
                      Port               => $Port,                       Port               => $Port,
                      State              => "Initialized",                       State              => "Initialized",
      AuthenticationMode => "",       AuthenticationMode => "",
Line 256  sub new { Line 200  sub new {
      LocalKeyFile       => "",       LocalKeyFile       => "",
                      CipherKey          => "",                       CipherKey          => "",
                      LondVersion        => "Unknown",                       LondVersion        => "Unknown",
                      Cipher             => undef};                       Cipher             => undef,
        ClientData         => undef};
     bless($self, $class);      bless($self, $class);
     unless ($self->{Socket} = IO::Socket::INET->new(PeerHost => $self->{Host},      unless ($self->{Socket} = IO::Socket::INET->new(PeerHost => $self->{Host},
        PeerPort => $self->{Port},         PeerPort => $self->{Port},
Line 267  sub new { Line 212  sub new {
  return undef; # Inidicates the socket could not be made.   return undef; # Inidicates the socket could not be made.
     }      }
     my $socket = $self->{Socket}; # For local use only.      my $socket = $self->{Socket}; # For local use only.
       $socket->sockopt(SO_KEEPALIVE, 1); # Turn on keepalive probes when idle.
     #  If we are local, we'll first try local auth mode, otherwise, we'll try      #  If we are local, we'll first try local auth mode, otherwise, we'll try
     #  the ssl auth mode:      #  the ssl auth mode:
   
Line 281  sub new { Line 227  sub new {
  #  allowed...else give up right away.   #  allowed...else give up right away.
   
  if(!(defined $key) || !(defined $keyfile)) {   if(!(defined $key) || !(defined $keyfile)) {
     if($InsecureOk) {              my $canconnect = 0;
               if (ref($secureconf{'connto'}) eq 'HASH') {
                   unless ($secureconf{'connto'}->{'dom'} eq 'req') {
                       $canconnect = 1;
                   }
               } else {
                   $canconnect = $InsecureOk;
               }
       if ($canconnect) {
  $self->{AuthenticationMode} = "insecure";   $self->{AuthenticationMode} = "insecure";
  $self->{TransactionRequest} = "init\n";   $self->{TransactionRequest} = "init\n";
     }       } 
Line 297  sub new { Line 251  sub new {
     return undef;      return undef;
  }   }
   
     }      } else {
     else {  
  #  Remote peer:  I'd like to do ssl, but if my host key or certificates   #  Remote peer:  I'd like to do ssl, but if my host key or certificates
  #  are not all installed, my only choice is insecure, if that's    #  are not all installed, my only choice is insecure, if that's 
  #  allowed:   #  allowed:
Line 306  sub new { Line 259  sub new {
  my ($ca, $cert) = lonssl::CertificateFile;   my ($ca, $cert) = lonssl::CertificateFile;
  my $sslkeyfile  = lonssl::KeyFile;   my $sslkeyfile  = lonssl::KeyFile;
   
  if((defined $ca)  && (defined $cert) && (defined $sslkeyfile)) {          my ($conntype,$gotconninfo);
           if ((ref($secureconf{'connto'}) eq 'HASH') &&
               (exists($hosttypes{$lonid}))) {
               $conntype = $secureconf{'connto'}{$hosttypes{$lonid}};
               if ($conntype ne '') {
                   $gotconninfo = 1;
               }
           }
    if (($conntype ne 'no') && (defined($ca)) && (defined($cert)) && (defined($sslkeyfile))) {
     $self->{AuthenticationMode} = "ssl";      $self->{AuthenticationMode} = "ssl";
     $self->{TransactionRequest} = "init:ssl\n";      $self->{TransactionRequest} = "init:ssl:$perlvar{'lonVersion'}\n";
    } elsif (($gotconninfo && $conntype ne 'req') || (!$gotconninfo && $InsecureOk)) { 
       # Allowed to do insecure:
       $self->{AuthenticationMode} = "insecure";
       $self->{TransactionRequest} = "init::$perlvar{'lonVersion'}\n";
  } else {   } else {
     if($InsecureOk) { # Allowed to do insecure:      # Not allowed to do insecure...
  $self->{AuthenticationMode} = "insecure";      $socket->close;
  $self->{TransactionRequest} = "init\n";      return undef;
     }  
     else { # Not allowed to do insecure...  
  $socket->close;  
  return undef;  
     }  
  }   }
     }      }
   
Line 333  sub new { Line 292  sub new {
     #      #
     # Set socket to nonblocking I/O.      # Set socket to nonblocking I/O.
     #      #
     my $socket = $self->{Socket};  
     my $flags    = fcntl($socket, F_GETFL,0);      my $flags    = fcntl($socket, F_GETFL,0);
     if(!$flags) {      if(!$flags) {
  $socket->close;   $socket->close;
Line 409  sub Readable { Line 367  sub Readable {
  $self->Transition("Disconnected");   $self->Transition("Disconnected");
  return -1;   return -1;
     }      }
       # If we actually got data, reset the timeout.
   
       if (length $data) {
    $self->{TimeoutRemaining}   = $self->{TimeoutValue}; # getting data resets the timeout period.
       }
     #  Append the data to the buffer.  And figure out if the read is done:      #  Append the data to the buffer.  And figure out if the read is done:
   
     &Debug(9,"Received from host: ".$data);      &Debug(9,"Received from host: ".$data);
Line 570  sub Readable { Line 533  sub Readable {
  $self->{InformWritable}     = 1;   $self->{InformWritable}     = 1;
  $self->{InformReadable}     = 0;   $self->{InformReadable}     = 0;
  $self->{Timeoutable}        = 1;   $self->{Timeoutable}        = 1;
  $self->{TimeoutRemaining}   = $self->{TimeoutValue};  
  $self->Transition("SendingRequest");   $self->Transition("SendingRequest");
  return 0;   return 0;
     } else {      } else {
Line 632  sub Writable { Line 594  sub Writable {
  ($errno == POSIX::EAGAIN)         ||   ($errno == POSIX::EAGAIN)         ||
  ($errno == POSIX::EINTR)          ||   ($errno == POSIX::EINTR)          ||
  ($errno ==  0)) {   ($errno ==  0)) {
    $self->{TimeoutRemaining} = $self->{TimeoutValue};
  substr($self->{TransactionRequest}, 0, $nwritten) = ""; # rmv written part   substr($self->{TransactionRequest}, 0, $nwritten) = ""; # rmv written part
       if(length $self->{TransactionRequest} == 0) {   if(length $self->{TransactionRequest} == 0) {
          $self->{InformWritable} = 0;      $self->{InformWritable} = 0;
          $self->{InformReadable} = 1;      $self->{InformReadable} = 1;
          $self->{TransactionReply} = '';      $self->{TransactionReply} = '';
          #      #
          # Figure out the next state:      # Figure out the next state:
          #      #
          if($self->{State} eq "Connected") {      if($self->{State} eq "Connected") {
             $self->Transition("Initialized");   $self->Transition("Initialized");
          } elsif($self->{State} eq "ChallengeReceived") {      } elsif($self->{State} eq "ChallengeReceived") {
             $self->Transition("ChallengeReplied");   $self->Transition("ChallengeReplied");
          } elsif($self->{State} eq "RequestingVersion") {      } elsif($self->{State} eq "RequestingVersion") {
             $self->Transition("ReadingVersionString");   $self->Transition("ReadingVersionString");
          } elsif ($self->{State} eq "SetHost") {      } elsif ($self->{State} eq "SetHost") {
             $self->Transition("HostSet");   $self->Transition("HostSet");
          } elsif($self->{State} eq "RequestingKey") {      } elsif($self->{State} eq "RequestingKey") {
             $self->Transition("ReceivingKey");   $self->Transition("ReceivingKey");
 #            $self->{InformWritable} = 0;  #            $self->{InformWritable} = 0;
 #            $self->{InformReadable} = 1;  #            $self->{InformReadable} = 1;
 #            $self->{TransactionReply} = '';  #            $self->{TransactionReply} = '';
          } elsif ($self->{State} eq "SendingRequest") {      } elsif ($self->{State} eq "SendingRequest") {
             $self->Transition("ReceivingReply");   $self->Transition("ReceivingReply");
             $self->{TimeoutRemaining} = $self->{TimeoutValue};   $self->{TimeoutRemaining} = $self->{TimeoutValue};
          } elsif ($self->{State} eq "Disconnected") {      } elsif ($self->{State} eq "Disconnected") {
             return -1;   return -1;
          }      }
          return 0;      return 0;
       }   }
    } else { # The write failed (e.g. partner disconnected).      } else { # The write failed (e.g. partner disconnected).
       $self->Transition("Disconnected");   $self->Transition("Disconnected");
       $socket->close();   $socket->close();
       return -1;   return -1;
    }      }
       
 }  }
 =pod  =pod
   
Line 813  sub Shutdown { Line 776  sub Shutdown {
     $socket->shutdown(2);      $socket->shutdown(2);
  }   }
     }      }
       $self->{Timeoutable}   = 0; # Shutdown sockets can't timeout.
 }  }
   
 =pod  =pod
Line 1118  sub ExchangeKeysViaSSL { Line 1082  sub ExchangeKeysViaSSL {
 #  #
 sub CompleteInsecure {  sub CompleteInsecure {
     my $self = shift;      my $self = shift;
     if($InsecureOk) {      $self->{LoncapaHim};
       my ($conntype,$gotconninfo);
       if ((ref($secureconf{'connto'}) eq 'HASH') &&
           (exists($hosttypes{$self->{LoncapaHim}}))) {
           $conntype = $secureconf{'connto'}{$hosttypes{$self->{LoncapaHim}}};
           if ($conntype ne '') {
               $gotconninfo = 1;
           }
       } 
       if ((($gotconninfo) && ($conntype ne 'req')) || (!$gotconninfo && $InsecureOk)) {
  $self->{AuthenticationMode} = "insecure";   $self->{AuthenticationMode} = "insecure";
  &Debug(8," Transition out of Initialized:insecure");   &Debug(8," Transition out of Initialized:insecure");
  $self->{TransactionRequest} = $self->{TransactionReply};   $self->{TransactionRequest} = $self->{TransactionReply};
Line 1138  sub CompleteInsecure { Line 1111  sub CompleteInsecure {
     }      }
 }  }
   
 =pod  
   
 =head2 GetHostIterator  
   
 Returns a hash iterator to the host information.  Each get from   
 this iterator returns a reference to an array that contains   
 information read from the hosts configuration file.  Array elements  
 are used as follows:  
   
  [0]   - LonCapa host id.  
  [1]   - LonCapa domain name.  
  [2]   - Loncapa role (e.g. library or access).  
  [3]   - DNS name server hostname.  
  [4]   - IP address (result of e.g. nslookup [3]).  
  [5]   - Maximum connection count.  
  [6]   - Idle timeout for reducing connection count.  
  [7]   - Minimum connection count.  
   
 =cut  
   
 sub GetHostIterator {  
   
     return HashIterator->new(\%hostshash);      
 }  
   
 ###########################################################  ###########################################################
 #  #
 #  The following is an unashamed kludge that is here to  #  The following is an unashamed kludge that is here to
Line 1174  sub GetHostIterator { Line 1122  sub GetHostIterator {
 #  #
   
   
 my $confdir='/etc/httpd/conf/';  my @confdirs=('/etc/httpd/conf/','/etc/apache2/');
   
 # ------------------- Subroutine read_conf: read LON-CAPA server configuration.  # ------------------- Subroutine read_conf: read LON-CAPA server configuration.
 # This subroutine reads PerlSetVar values out of specified web server  # This subroutine reads PerlSetVar values out of specified web server
Line 1182  my $confdir='/etc/httpd/conf/'; Line 1130  my $confdir='/etc/httpd/conf/';
 sub read_conf  sub read_conf
   {    {
     my (@conf_files)=@_;      my (@conf_files)=@_;
     my %perlvar;      my (%perlvar,%configdirs);
     foreach my $filename (@conf_files,'loncapa_apache.conf')      foreach my $filename (@conf_files,'loncapa_apache.conf') {
       {          my $configdir = '';
   if($DebugLevel > 3) {          $configdirs{$filename} = [@confdirs];
       print STDERR ("Going to read $confdir.$filename\n");          while ($configdir eq '' && @{$configdirs{$filename}} > 0) {
   }              my $testdir = shift(@{$configdirs{$filename}});
  open(CONFIG,'<'.$confdir.$filename) or              if (-e $testdir.$filename) {
     die("Can't read $confdir$filename");                  $configdir = $testdir;
  while (my $configline=<CONFIG>)              }
   {          }
     if ($configline =~ /^[^\#]*PerlSetVar/)          if ($configdir eq '') {
       {              die("Couldn't find a directory containing $filename");
  my ($unused,$varname,$varvalue)=split(/\s+/,$configline);          }
    if($DebugLevel > 3) {
       print STDERR ("Going to read $configdir.$filename\n");
    }
    open(CONFIG,'<'.$configdir.$filename) or
       die("Can't read $configdir$filename");
    while (my $configline=<CONFIG>) {
       if ($configline =~ /^[^\#]*PerlSetVar/) {
           my ($unused,$varname,$varvalue)=split(/\s+/,$configline);
  chomp($varvalue);   chomp($varvalue);
  $perlvar{$varname}=$varvalue;   $perlvar{$varname}=$varvalue;
       }      }
   }   }
  close(CONFIG);   close(CONFIG);
       }      }
     if($DebugLevel > 3) {      if($DebugLevel > 3) {
  print STDERR "Dumping perlvar:\n";   print STDERR "Dumping perlvar:\n";
  foreach my $var (keys %perlvar) {   foreach my $var (keys %perlvar) {
Line 1211  sub read_conf Line 1167  sub read_conf
     return $perlvarref;      return $perlvarref;
 }  }
   
 #---------------------- Subroutine read_hosts: Read a LON-CAPA hosts.tab  
 # formatted configuration file.  
 #  
 my $RequiredCount = 4; # Required item count in hosts.tab.  
 my $DefaultMaxCon = 5; # Default value for maximum connections.  
 my $DefaultIdle   = 1000;       # Default connection idle time in seconds.  
 my $DefaultMinCon = 0;          # Default value for minimum connections.  
   
 sub read_hosts {  
     my $Filename = shift;  
     my %HostsTab;  
       
     open(CONFIG,'<'.$Filename) or die("Can't read $Filename");  
     while (my $line = <CONFIG>) {  
  if ($line !~ /^\s*\#/) {  
     $line=~s/\s*$//;  
     my @items = split(/:/, $line);  
     if(scalar @items >= $RequiredCount) {  
  if (scalar @items == $RequiredCount) { # Only required items:  
     $items[$RequiredCount] = $DefaultMaxCon;  
  }  
  if(scalar @items == $RequiredCount + 1) { # up through maxcon.  
     $items[$RequiredCount+1] = $DefaultIdle;  
  }  
  if(scalar @items == $RequiredCount + 2) { # up through idle.  
     $items[$RequiredCount+2] = $DefaultMinCon;  
  }  
  {  
     my @list = @items; # probably not needed but I'm unsure of   
     # about the scope of item so...  
     $HostsTab{$list[3]} = \@list;   
  }  
     }  
  }  
     }  
     close(CONFIG);  
     my $hostref = \%HostsTab;  
     return ($hostref);  
 }  
 #  #
 #   Get the version of our peer.  Note that this is only well  #   Get the version of our peer.  Note that this is only well
 #   defined if the state machine has hit the idle state at least  #   defined if the state machine has hit the idle state at least
Line 1262  sub PeerVersion { Line 1179  sub PeerVersion {
    return $version;     return $version;
 }  }
   
   #
   #  Manipulate the client data field
   #
   sub SetClientData {
       my ($self, $newData) = @_;
       $self->{ClientData} = $newData;
   }
   #
   #  Get the current client data field.
   #
   sub GetClientData {
       my $self = shift;
       return $self->{ClientData};
   }
   
   #
   # Get the HostID of our peer 
   #
   
   sub PeerLoncapaHim {
       my $self = shift;
       return $self->{LoncapaHim};
   }
   
 1;  1;
   
 =pod  =pod
Line 1455  true if the current state requires a wri Line 1396  true if the current state requires a wri
   
 true if the current state requires timeout support.  true if the current state requires timeout support.
   
 =item GetHostIterator:  
   
 Returns an iterator into the host file hash.  
   
 =cut  =cut
Removed from v.1.41  
changed lines
  Added in v.1.55

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>