--- loncom/build/Makefile	2000/12/19 00:36:37	1.14
+++ loncom/build/Makefile	2002/09/05 21:08:55	1.130.2.3
@@ -1,77 +1,743 @@
-# Makefile
-# For LON-CAPA
-# Scott Harrison
-# November 2000
-
-CDTARGET="."
-
-all: 
-	# nothing yet here
-
-cd: 
-	# Build temporary script to get cd
-	# make sure there is enough disk space
-	@echo "# Automatically generated Makefile for LON-CAPA" > Makefile.cd.tmp
-	@/bin/df $(CDTARGET) | perl -e '@l=<>;split(/\s+/,$$l[1]);$$s=@_[3]*1024;if ($$s>1000000000) {print "\S=1\n";} else {print "\S=0\n";}' >> Makefile.cd.tmp
-	@echo "cd:" >> Makefile.cd.tmp
-	@echo -e "ifeq (\$$(S),1)" >> Makefile.cd.tmp
-	@echo -e "\t@echo \"There is enough disk space.  Good!\"" >> Makefile.cd.tmp
-	# set up commands to copy cd image from install.lon-capa.org (wget -r)
-	@echo -e "\tcd \$$(TARGET); wget -np -r -R "index.html" http://install.lon-capa.org/3.1/currentcdsource" >> Makefile.cd.tmp
-	@echo -e "\tcd \$$(TARGET); find ./install.lon-capa.org -name index.html | xargs rm -f" >> Makefile.cd.tmp
-	# set up cvs update commands
-	# set up cd image compilation (mkisofs)
-	@echo -e "else" >> Makefile.cd.tmp
-	@echo -e "\t@echo \"ERROR ******* Not enough disk space. There must be at least one gigabyte free\"" >> Makefile.cd.tmp
-	@echo -e "endif" >> Makefile.cd.tmp
-	make -f Makefile.cd.tmp TARGET="$(CDTARGET)" cd
+# The LearningOnline Network with CAPA
 
-cd_cover:
+# Scott Harrison, your friendly neighborhood volunteer
+# $Id: Makefile,v 1.130.2.3 2002/09/05 21:08:55 albertel Exp $
+
+# TYPICAL USAGE of this Makefile is primarily for two targets:
+# "make build" and "make install".
+# Many other targets and features are supported (see the initial
+# help targets).
+
+# ======================================= Default settings for Makefile options
+DISTPROBE=`perl ./distprobe`
+DIST=$(DISTPROBE)
+CATEGORY="development"
+SOURCE=../..
+TARGET=""
+NORESTORECONF="0"
+HOSTNAME=""
+LAUNCH=| perl
+QUERYLAUNCH=> /tmp/loncapa_query.pl; perl /tmp/loncapa_query.pl
+OUTSTREAM=>
+SAVE=program.pl.$(TIMESTAMP)
+LAUNCHSAVE=$(OUTSTREAM) $(SAVE)
+METAMTARGET=""
+MTARGET=""
+VERSION=0.5.1
+DIRTARGET=loncapa-$(VERSION)
+
+# =============================================== Help targets for the Makefile
+# If 'make' is run without any arguments, the 'help' target is called since
+# it is the first target.
+help:
+	@echo "*** You need to specify a valid target ***"
+	@echo "To get a list of valid targets: \"make help_TARGETS\""
+	@echo "To get a list of valid options: \"make help_OPTIONS\""
+	@echo " "
+	@echo "Typically invoked targets are:"
+	@echo "    make build"
+	@echo "    make install"
+	@echo "    make test"
+	@echo "    make clean"
+
+help_OPTIONS:
+	@echo "* ADJUSTABLE OPTIONS *"
+	@echo "(option) DIST can be redhat7, debian, redhat6.2, or default"
+	@echo "         You probably do not need to specify this; it is"
+	@echo "         automatically probed for."
+	@echo "(option) CATEGORY can be 'runtime' or 'development'; currently"
+	@echo "         the 'development' setting is the most reliable;"
+	@echo "         eventually, production machines should be using the"
+	@echo "         'runtime' settings"
+	@echo "(option) SOURCE is an absolute or relative directory path."
+	@echo "         SOURCE corresponds to the root directory of the"
+	@echo "         loncapa source release"
+	@echo "(option) TARGET is an absolute or relative directory path."
+	@echo "         This is where files will be installed on your system."
+	@echo "         Typically, this should be set to nothing (which"
+	@echo "         corresponds to the '/' root of the entire filesystem)."
+	@echo "(option) NORESTORECONF, when set to a non-zero value, stops"
+	@echo "         filesystem upgrades from overwriting existing "
+	@echo "         configuration files.  Ordinarily, NORESTORECONF=0, "
+	@echo "         because the existing configuration files are safely"
+	@echo "         dealt with (or so one hopes... :) )."
+	@echo "(option) HOSTNAME specifies the name of a remote server for"
+	@echo "         which a NET_* Makefile target should be launched"
+	@echo "(option) VERSION; especially useful for the 'tardist' target"
+	@echo "         this tags the tarball file and internal directories"
+	@echo "         with a specific version string (conventionally "
+	@echo "         numeric)"
+
+help_TARGETS:
+	@echo "*** RUNNING TESTS TO ENSURE SOLID PERFORMANCE ***"
+	@echo "test: test different parts of the LON-CAPA system (TEST_*)."
+	@echo "      Makefile-dependent processes as well as horizontal and"
+	@echo "      vertical aspects of the LON-CAPA system architecture"
+	@echo "      are all tested."
+	@echo "TEST_lpml_scripts: make sure that the system can process"
+	@echo "                   the Linux Packaging Markup Language."
+	@echo "                   This is neither horizontal or vertical"
+	@echo "                   testing.  The idea is to make sure that"
+	@echo "                   the installation software itself works"
+	@echo "                   as expected."
+	@echo "TEST_system_dependencies: make sure that all needed system "
+	@echo "                          components are active and present "
+	@echo "                          on the server such as perl modules"
+	@echo "                          and the MySQL database"
+	@echo "                          (horizontal testing)"
+	@echo "TEST_web_layer: mimic a login and various vertical actions on "
+	@echo "                a LON-CAPA system"
+	@echo "TEST_hosts_tab: make sure that a loncapa/loncom/hosts.tab"
+	@echo "                file is specified for installation"
+	@echo "TEST_html2ps: test for the presence of html2ps which is needed"
+	@echo "              for making a PDF compilation for pdfdoc"
+	@echo "*** GENERAL TARGETS SUCH AS 'build' AND 'install' ***"
+	@echo "build: compile the source tree"
+	@echo "buildflag: a semaphore that helps educate the user to run"
+	@echo "           'make build' first before running 'make install'"
+	@echo "configinstall: install configuration files and restore with"
+	@echo "               prior information"
+	@echo "install: install from a ***compiled*** source tree"
+	@echo "         (see make build) to a specified TARGET destination"
+	@echo "         on the filesystem (default setting is TARGET=/)."
+	@echo "rawinstall: just install files, links and directories without"
+	@echo "            any bells or whistles (e.g. double-checking"
+	@echo "            configurations, fine-tuning webserver, etc.)"
+	@echo "hosts_tab: install the hosts.tab to the filesystem"
+	@echo "webserverconf: fine-tune the web server configuration;"
+	@echo "               make sure the proper 'Include' statements"
+	@echo "               are appended to httpd.conf"
+	@echo "vanillatar: generate top-level files such as README, UPDATE,"
+	@echo "            CHECKRPMS, and TEST (needed by tardist)"
+	@echo "tardist: build a tarball that will upgrade the software on a "
+	@echo "         system"
+	@echo "sanitycheck: probe for common errors and recommend fixes to"
+	@echo "             the user"
+	@echo "updatequery: solicit the user for machine configuration"
+	@echo "             information; to be incorporated during an update"
+	@echo "             procedure (via the UPDATE command)"
+	@echo "postinstall: double-check things after installation"
+	@echo "VERSION: tag the filesystem with version information inside"
+	@echo "         /etc/loncapa-release"
+	@echo "aboutVERSION: place version information inside about.html"
+	@echo "*** Makefile.* TARGETS BUILT DYNAMICALLY FROM loncapafiles.lpml ***"
+	@echo "Makefile.configinstall: generate a Makefile for configuration"
+	@echo "                        files; built dynamically from"
+	@echo "                        loncapafiles.lpml"
+	@echo "Makefile.build: generate a Makefile for compiling"
+	@echo "                files inside the source directory; "
+	@echo "                Makefile.build is generated from"
+	@echo "                loncapafiles.lpml"
+	@echo "Makefile.install: generate a Makefile for installing"
+	@echo "                  files; built dynamically from"
+	@echo "                  loncapafiles.lpml"
+	@echo "*** TARGETS FOR OPERATING ON FILESYSTEMS ACROSS THE NETWORK ***"
+	@echo "lpmladm: coordinates username=lpmladm mediated secure shell"
+	@echo "         processes; needed for the NET_* targets"
+	@echo "NET_hosts_tab: install the hosts.tab to a filesystem elsewhere"
+	@echo "               on the network"
+	@echo "NET_webserverconf: fine-tune the web server configuration on a"
+	@echo "                   filesystem elsewhere on the network"
+	@echo "NET_rawinstall: launch the rawinstall target on a filesystem"
+	@echo "                elsewhere on the network"
+	@echo "*** TARGETS FOR MAKING LISTS (MANIFESTS) OF LON-CAPA FILES ***"
+	@echo "MANIFEST_all: generate a list of all files to be included in"
+	@echo "              the distributed tarball"
+	@echo "MANIFEST_cvs: essentially a list of all CVS/Entries files used"
+	@echo "              for 'time-checking' intelligence"
+	@echo "MANIFEST_lpml: a list of all LON-CAPA files to be installed,"
+	@echo "               compile from, used as building software, and"
+	@echo "               testing"
+	@echo "MANIFEST_vanillatar: 'README'-type top-level files that a user"
+	@echo "                     of the distributed tarball would first"
+	@echo "                     look at and work with"
+	@echo "*** STATUS REPORT TARGETS ***"
+	@echo "warningnote: analyze the WARNINGS file and produce a synopsis"
+	@echo "             and recommended action to the user"
+	@echo "HTML: generate an HTML-formatted description of the LON-CAPA"
+	@echo "      source files"
+	@echo "status: compare the TARGET filesystem with a compiled loncapa "
+	@echo "        source directory"
+	@echo "statuspost: post the results of "make status" to "
+	@echo "            TARGET/home/httpd/html/lon-status/filestatus.html"
+	@echo "rpmstatus: compare the rpms on a system to defined lists "
+	@echo "           loncapa/doc/otherfiles/cd_rpms and "
+	@echo "           loncapa/doc/otherfiles/rpm_list.txt"
+	@echo "rpmstatuspost: post the results of 'make rpmstatus' to "
+	@echo "            TARGET/home/httpd/html/lon-status/rpmstatus.html"
+	@echo "*** ALTERNATIVE PACKAGING TARGETS ***"
+	@echo "RPM: build LON-CAPA-base RPM from loncapa source repository"
+	@echo "     (still under development)"
+	@echo "DPKG: build a loncapa Debian package from loncapa source"
+	@echo "      repository (still under development)"
+	@echo "base_rpm_file_list: create a file listing to be used for"
+	@echo "                    generating an RPM software package"
+	@echo "BinaryRoot: create a BinaryRoot directory to be used for"
+	@echo "            generating an RPM software package"
+	@echo "*** MASTER DOCUMENTATION TARGETS ***"	
+	@echo "doc: generate web-page documentation for install.lon-capa.org"
+	@echo "     (and eventually for documentation on installed machines)"
+	@echo "pdfdoc: make a PDF-formatted compilation of all installation"
+	@echo "        documentation"
+	@echo "*** KEEPING THINGS CLEAN ***"
+	@echo "clean: remove any files that might (even by remote chance)"
+	@echo "       interfere with rebuilding/recompiling software"
+	@echo "reallyclean: remove all files that were generated during"
+	@echo "             building or compilation of the software"
+	@echo "*** A HELPFUL DEPENDENCY ***"
+	@echo "alwaysrun: blank target that is a dependency for targets"
+	@echo "           that should \"always run\""
+
+# =========================== *** RUNNING TESTS TO ENSURE SOLID PERFORMANCE ***
+
+test: TEST_lpml_scripts TEST_system_dependencies TEST_web_layer
+	@echo "ALL SYSTEM DEPENDENCY TESTS SUCCESSFUL"
+
+TEST_system_dependencies:
+	@echo "TESTING SYSTEM DEPENDENCIES"
+	cd system_dependencies; make
+
+TEST_lpml_scripts:
+	@echo "TESTING LPML INSTALLATION CODE"
+	cd ../test; perl filecomparetest.pl
+
+TEST_web_layer:
+	@echo "TESTING WEB LAYER"
+	cd weblayer_test; make
+
+TEST_hosts_tab:
+	@echo "Testing hosts.tab"
+	@if (test -e ../hosts.tab); then \
+		echo "there is a defined link or file; assume okay"; \
+	else echo "**** ERROR **** hosts.tab not defined!" && \
+	     echo -n "You need to do one of the following within your " && \
+	     echo "CVS repository (cd loncapa/loncom)" && \
+	     echo "   1) ln -s production_hosts.tab hosts.tab" && \
+	     echo "   2) ln -s development_hosts.tab hosts.tab" && \
+	     echo "or 3) ln -s rawhide_hosts.tab hosts.tab" && \
+	     echo "(you most likely want option #1, production_hosts.tab)" && \
+	     exit 1; \
+	fi
+
+TEST_html2ps:
+	@if (test -e /usr/local/html2ps/bin/html2ps); then \
+		echo "I can find html2ps; assume okay"; \
+	else \
+	echo "**** ERROR **** cannot find /usr/local/html2ps/bin/html2ps!" && \
+        echo "Please visit http://www.tdb.uu.se/~jan/html2ps.html" && \
+	exit 1; \
+	fi
+
+# ======================= *** GENERAL TARGETS SUCH AS 'build' AND 'install' ***
+
+build: Makefile.build pod2html.sh pod2man.sh
+	install -d $(SOURCE)/doc/man
+	install -d $(SOURCE)/doc/scripts
+	install -d $(SOURCE)/doc/lib/perl/Apache
+	echo -n "" > WARNINGS
+	make -f Makefile.build all
+	echo '1' > buildflag
+	make warningnote
+
+buildflag:
+	@echo "**** ERROR **** You need to run 'make build' first" > WARNINGS
+	make warningnote
+	@need_to_run_make_build_first 2>/dev/null
+
+configinstall: Makefile.configinstall
+	make -f Makefile.configinstall SOURCE="$(SOURCE)" TARGET="$(TARGET)" \
+	configfiles
+	if (test "0" = $(NORESTORECONF)); then \
+	perl loncaparestoreconfigurations suffix .lpmlnew; fi
+
+install: buildflag VERSION TEST_hosts_tab Makefile.install Makefile
+	echo -n "" > WARNINGS
+	make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" \
+	directories
+	make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" files
+	make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" links
+	make SOURCE="$(SOURCE)" TARGET="$(TARGET)" \
+	NORESTORECONF="$(NORESTORECONF)" configinstall
+	make postinstall
+	make warningnote
+	echo "You can run 'make test' to see if your system is ready to go!"
+	echo "NOTE THAT YOUR SYSTEM MUST HAVE MYSQL WITH A USER=\"www\" AND"
+	echo -n "PASSWORD=\"localhostkey\" FOR www\@localhost"
+	echo -n "(YOU MAY NEED TO REINITIALIZE YOUR MYSQL www\@localhost USER)"
+	echo -n "Please see http://install.lon-capa.org/ for more information"
+
+rawinstall: VERSION Makefile.install Makefile
+	echo -n "" > WARNINGS
+	make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" \
+	directories
+	make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" files
+	make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" links
+	make SOURCE="$(SOURCE)" TARGET="$(TARGET)" \
+	NORESTORECONF="$(NORESTORECONF)" configinstall
+
+hosts_tab: TEST_hosts_tab
+	cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
+	perl xfml_parse.pl $(SOURCE)/doc/loncapafiles/valid_hosts.xfml | \
+	perl lpml_parse.pl install $(CATEGORY) $(DIST) "$(SOURCE)" \
+	"$(TARGET)" > Makefile.install
+	make -f Makefile.install directories
+	make -f Makefile.install files
+	@echo "If hosts.tab has changed, restart httpd and loncontrol:"
+	@echo "   /etc/rc.d/init.d/httpd restart"
+	@echo "   /etc/rc.d/init.d/loncontrol restart"
+
+webserverconf:
+	cat $(SOURCE)/doc/loncapafiles/webserver.piml | \
+	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH)
+
+# ---------------- Top-level files such as README, UPDATE, CHECKRPMS, and TEST
+vanillatar:
+	# --------------------------- Point UPDATE to the internal make process
+	echo '#!/bin/sh' > $(SOURCE)/UPDATE
+	echo 'touch loncom/build/WARNINGS' >> $(SOURCE)/UPDATE;
+	echo 'ln -s loncom/build/WARNINGS WARNINGS' >> $(SOURCE)/UPDATE;
+	echo 'cd loncom/build; make build' >> $(SOURCE)/UPDATE
+	echo 'make rawinstall' >> $(SOURCE)/UPDATE
+	echo 'make configinstall' >> $(SOURCE)/UPDATE
+	echo 'make updatequery' >> $(SOURCE)/UPDATE
+	echo 'make hosts_tab' >> $(SOURCE)/UPDATE
+	echo 'make postinstall' >> $(SOURCE)/UPDATE
+	echo 'make aboutVERSION' >> $(SOURCE)/UPDATE
+	echo 'make warningnote' >> $(SOURCE)/UPDATE
+	# ----------------------------- Point TEST to the internal make process
+	echo '#!/bin/sh' > $(SOURCE)/TEST
+	echo 'cd loncom/build; make test' >> $(SOURCE)/TEST
+	# ----------------------------- Copy CHECKRPMS to the vanilla top-level
+	cp -v $(SOURCE)/loncom/build/CHECKRPMS $(SOURCE)/CHECKRPMS
+	# ----------------------- vanilla executables must indeed be executable
+	chmod a+rx $(SOURCE)/UPDATE
+	chmod a+rx $(SOURCE)/TEST
+	chmod a+rx $(SOURCE)/CHECKRPMS
+	# -------------------------------- Copy README to the vanilla top-level
+	cp -v $(SOURCE)/doc/shortest_path_redhat7.2.txt $(SOURCE)/README
+
+tardist:
+	make MANIFEST_all
+	make vanillatar
+	# -------------------------------------------------------- Make tardist
+	@cd $(SOURCE); \
+	if (test -h $(DIRTARGET)); then \
+		echo "$(DIRTARGET) link already defined; assume okay"; \
+	else \
+		ln -s . $(DIRTARGET); \
+	fi
+	cp -v $(SOURCE)/loncom/license/about.html \
+	$(SOURCE)/loncom/license/about.html.orig
+	make aboutVERSION
+	cd $(SOURCE); \
+	tar --no-recursion --numeric-owner --files-from MANIFEST \
+	-h -czf $(DIRTARGET).tar.gz 2>tar_WARNINGS || [ "0" == "0" ]
+	mv -v $(SOURCE)/loncom/license/about.html.orig \
+	$(SOURCE)/loncom/license/about.html
+	cat $(SOURCE)/tar_WARNINGS | \
+	xargs --replace=XXX echo '**** WARNING **** XXX' > WARNINGS
+	rm -f $(SOURCE)/tar_WARNINGS
+	make warningnote
+
+sanitycheck:
+	cat $(SOURCE)/doc/loncapafiles/sanitycheck.piml | \
+	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
+	tee -a WARNINGS
+
+updatequery:
+	cat $(SOURCE)/doc/loncapafiles/updatequery.piml | \
+	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(QUERYLAUNCH)
+
+reseval_fixup:
+	cat $(SOURCE)/doc/loncapafiles/reseval_fixup.piml | \
+	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
+	tee -a WARNINGS
+
+postinstall:
+	make webserverconf
+	make reseval_fixup
+	make sanitycheck
+
+VERSION:
+	install -d $(TARGET)/etc
+	echo -n "LON-CAPA release $(VERSION)-" > $(TARGET)/etc/loncapa-release
+	date +"%Y%m%d" >> $(TARGET)/etc/loncapa-release
+
+aboutVERSION:
+	cat $(SOURCE)/loncom/license/about.html | \
+	perl -e '$$d=`date +"%Y%m%d"`;chomp($$d);while(<>){s/\<\!\-\- VERSION \-\-\>/$(VERSION)-$$d/; print;}' > \
+	$(SOURCE)/loncom/license/about.html.new
+	mv -v $(SOURCE)/loncom/license/about.html.new \
+	$(SOURCE)/loncom/license/about.html
+
+# ========= *** Makefile.* TARGETS BUILT DYNAMICALLY FROM loncapafiles.lpml ***
+
+Makefile.configinstall: $(SOURCE)/doc/loncapafiles/loncapafiles.lpml \
+                        lpml_parse.pl
+	cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
+	perl lpml_parse.pl configinstall $(CATEGORY) $(DIST) "$(SOURCE)" \
+	"$(TARGET)" > Makefile.configinstall
+
+Makefile.build: $(SOURCE)/doc/loncapafiles/loncapafiles.lpml lpml_parse.pl
+	cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
+	perl lpml_parse.pl build $(CATEGORY) $(DIST) "$(SOURCE)" "$(TARGET)" \
+	> Makefile.build
+
+Makefile.install: alwaysrun
+	cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
+	perl lpml_parse.pl install $(CATEGORY) $(DIST) "$(SOURCE)" \
+	"$(TARGET)" > Makefile.install
+
+# ============= *** TARGETS FOR OPERATING ON FILESYSTEMS ACROSS THE NETWORK ***
+
+lpmladm:
+	@if (test $(METAMTARGET) = "TRANSPORT"); then \
+		echo "Transporting to $(HOSTNAME)"; \
+		sudo make DIST=$(DIST) CATEGORY=$(CATEGORY) \
+		SOURCE="$(SOURCE)" \
+		TARGET="lpmladm.$(TIMESTAMP)" \
+		NORESTORECONF="$(NORESTORECONF)" "$(MTARGET)"; \
+		cd lpmladm.$(TIMESTAMP); \
+		sudo tar czvf ../tarball$(TIMESTAMP).tar.gz .; \
+		cd ..; scp tarball$(TIMESTAMP).tar.gz \
+		lpmladm@$(HOSTNAME):~/tarball$(TIMESTAMP).tar.gz; \
+		ssh lpmladm@$(HOSTNAME) sudo mv tarball$(TIMESTAMP).tar.gz /; \
+		ssh lpmladm@$(HOSTNAME) sudo tar -x -z -v -C / \
+		-p --same-owner -f \
+		/tarball$(TIMESTAMP).tar.gz; \
+		ssh lpmladm@$(HOSTNAME) sudo rm -f \
+		/tarball$(TIMESTAMP).tar.gz; \
+	elif (test $(METAMTARGET) = "LAUNCH"); then \
+		echo "Launching process on $(HOSTNAME)"; \
+		LAUNCHSAVE=$(OUTSTREAM) $(SAVE); \
+		make DIST=$(DIST) CATEGORY=$(CATEGORY) SOURCE="$(SOURCE)" \
+		TARGET="$(TARGET)" NORESTORECONF="$(NORESTORECONF)" \
+		LAUNCH="$(LAUNCHSAVE)" "$(MTARGET)"; \
+		scp $(SAVE) lpmladm@$(HOSTNAME):~/$(SAVE); \
+		ssh lpmladm@$(HOSTNAME) sudo perl $(SAVE); \
+		ssh lpmladm@$(HOSTNAME) sudo rm -f $(SAVE); \
+	else \
+		echo "**** ERROR **** Incorrect METAMTARGET"; \
+	fi
+
+NET_hosts_tab:
+	make TIMESTAMP=`date +"%s"` METAMTARGET="TRANSPORT" \
+	MTARGET="hosts_tab" HOSTNAME="$(HOSTNAME)" lpmladm
+
+NET_webserverconf:
+	make TIMESTAMP=`date +"%s"` METAMTARGET="LAUNCH" \
+	MTARGET="webserverconf" HOSTNAME="$(HOSTNAME)" lpmladm
+
+NET_rawinstall:
+	make TIMESTAMP=`date +"%s"` METAMTARGET="TRANSPORT" \
+	MTARGET="rawinstall" HOSTNAME="$(HOSTNAME)" lpmladm
+
+# ============== *** TARGETS FOR MAKING LISTS (MANIFESTS) OF LON-CAPA FILES ***
+
+MANIFEST_all:
+	# --------------------------------------------------------- start clean
+	rm -f $(SOURCE)/MANIFEST
+	make MANIFEST_lpml
+	make MANIFEST_vanillatar
+	make MANIFEST_cvs
+	# ---------------------------------- might as well include the MANIFEST
+	echo 'MANIFEST' >> $(SOURCE)/MANIFEST
+	# ------------------------------------------ hosts.tab are belong to us
+	echo 'loncom/rawhide_hosts.tab' >> $(SOURCE)/MANIFEST
+	echo 'loncom/production_hosts.tab' >> $(SOURCE)/MANIFEST
+	echo 'loncom/development_hosts.tab' >> $(SOURCE)/MANIFEST
+	# ------------------ Files needed for dynamically generated directories
+	echo 'doc/man' >> $(SOURCE)/MANIFEST
+	echo 'doc/lib' >> $(SOURCE)/MANIFEST
+	echo 'doc/lib/perl' >> $(SOURCE)/MANIFEST
+	echo 'doc/lib/perl/Apache' >> $(SOURCE)/MANIFEST
+	echo 'doc/scripts' >> $(SOURCE)/MANIFEST
+	# --------------------------------------------------- Clean up MANIFEST
+	cd $(SOURCE); \
+	sort MANIFEST | perl -nle 'print "$(DIRTARGET)/$$_"' | \
+	perl -nle 's/\w+\/\.\.\///g;s/\w+\/\.\.\///g;print' | \
+	perl -nle 's/\w+\/\.\.\///g;s/\w+\/\.\.\///g;print' | \
+	perl -nle 's/\w+\/\.\.\///g;s/\w+\/\.\.\///g;print' | \
+	perl -nle 's/\/\.\//\//g;print' | sort | uniq > \
+	MANIFEST_loncapa
+	cd $(SOURCE); mv -v MANIFEST_loncapa MANIFEST
+
+# --------------- MANIFEST files with important CVS versioning/date information
+MANIFEST_cvs:
+	# ------ CVS/Entries directories to retain 'time-checking' intelligence
+	cd $(SOURCE); find . -type f -name 'Entries' | grep 'CVS/Entries' >> \
+	MANIFEST
+
+# ------------------- MANIFEST the building, testing and standard loncapa files
+MANIFEST_lpml:
+	cat $(SOURCE)/doc/loncapafiles/buildfiles.lpml | \
+	perl lpml_parse.pl MANIFEST development default \
+	'$(SOURCE)' '$(TARGET)' | grep '[[:alnum:]]' >> $(SOURCE)/MANIFEST
+	cat $(SOURCE)/doc/loncapafiles/testfiles.lpml | \
+	perl lpml_parse.pl MANIFEST development default \
+	'$(SOURCE)' '$(TARGET)' | grep '[[:alnum:]]' >> $(SOURCE)/MANIFEST
+	cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
+	perl lpml_parse.pl MANIFEST development default \
+	'$(SOURCE)' '$(TARGET)' | grep '[[:alnum:]]' >> $(SOURCE)/MANIFEST
+
+# ------------ Files for top-level (the vanilla layer that the user first sees)
+MANIFEST_vanillatar:
+	echo 'README' >> $(SOURCE)/MANIFEST
+	echo 'UPDATE' >> $(SOURCE)/MANIFEST
+	echo 'TEST' >> $(SOURCE)/MANIFEST
+	echo 'CHECKRPMS' >> $(SOURCE)/MANIFEST
+
+# =============================================== *** STATUS REPORT TARGETS ***
+
+warningnote:
+	@if (test -s WARNINGS); then \
+		W=`grep -c '\*\*\*\* WARNING' WARNINGS`; \
+		E=`grep -c '\*\*\*\* ERROR' WARNINGS`; \
+		N=`grep -c '\*\*\*\* NOTE' WARNINGS`; \
+		echo "--->  $$W WARNINGS ENCOUNTERED!       "; \
+		echo "--->  $$E ERRORS ENCOUNTERED!         "; \
+		echo "--->  $$N NOTES ENCOUNTERED!          "; \
+		echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"; \
+		echo "!!!!  Please read the WARNINGS file !!!!"; \
+		echo "!!!!   to make sure everything is   !!!!"; \
+		echo "!!!!    correct and taken care of   !!!!"; \
+		echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"; \
+	fi
 
 HTML:
 	install -d HTML
-	cp ../../doc/loncapafiles/*.gif HTML
-	perl parse.pl ../../doc/loncapafiles/loncapafiles.html HTML > HTML/index.html
+	cp $(SOURCE)/doc/loncapafiles/*.gif HTML
+	cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
+	perl lpml_parse.pl html development default "$(SOURCE)" '$(TARGET)' \
+	> HTML/index.html
 
 status:
 	install -d HTML
-	cp ../../doc/loncapafiles/*.gif HTML
-	perl parse.pl ../../doc/loncapafiles/loncapafiles.html status > HTML/filestatus.html
-
-LCMakefile:
-	perl parse.pl ../../doc/loncapafiles/loncapafiles.html LCMakefile > LCMakefile
-
-SPEC:
-	perl parse.pl ../../doc/loncapafiles/loncapafiles.html SPEC
-
-configinstall: 
-	# there is a dependency on having directories in place, but oh well...
-	perl parse.pl ../../doc/loncapafiles/loncapafiles.html configinstall > Makefile.configinstall
-	make -f Makefile.configinstall SOURCE="../.." TARGET="" configfiles
-	perl loncaparestoreconfigurations lasttimestamp
-	make -f Makefile.configinstall TARGET="" configpermissions
-
-install: build
-	perl parse.pl ../../doc/loncapafiles/loncapafiles.html install > Makefile.install
-	make -f Makefile.install SOURCE="../.." TARGET="" directories
-	make -f Makefile.install SOURCE="../.." TARGET="" files
-	make -f Makefile.install SOURCE="../.." TARGET="" links
-
-build:
-	perl parse.pl ../../doc/loncapafiles/loncapafiles.html build > Makefile.build
-	make -f Makefile.build all
-
-RPM: BinaryRoot
-	cat base_file_list.txt | perl make_rpm.pl base 3.1 '' '' BinaryRoot
+	cp $(SOURCE)/doc/loncapafiles/*.gif HTML
+	cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
+	perl lpml_parse.pl html $(CATEGORY) $(DIST) "$(SOURCE)" "($TARGET)" | \
+	perl lpml_html_posteval.pl > \
+	HTML/filestatus.html
+
+statuspost: status
+	cp $(SOURCE)/doc/loncapafiles/*.gif \
+	$(TARGET)/home/httpd/html/lon-status
+	cp HTML/filestatus.html \
+	$(TARGET)/home/httpd/html/lon-status/filestatus.html
+
+rpmstatus:
+	install -d RPMSTATUS
+	rpm -qa --queryformat \
+	'%{NAME}\t%{VERSION}\t%{RELEASE}\t%{BUILDTIME}\n' | sort > \
+	RPMSTATUS/current.tmp
+	cat $(SOURCE)/doc/otherfiles/cd_rpms.txt > RPMSTATUS/standard.tmp
+	cat $(SOURCE)/doc/otherfiles/rpm_list.txt > RPMSTATUS/expected.tmp
+	perl rpmparse.pl RPMSTATUS/standard.tmp RPMSTATUS/current.tmp \
+	RPMSTATUS/expected.tmp > RPMSTATUS/rpmstatus.html
+
+rpmstatuspost: rpmstatus
+	cp RPMSTATUS/rpmstatus.html /home/httpd/html/lon-status/rpmstatus.html
+
+# ======================================= *** ALTERNATIVE PACKAGING TARGETS ***
+
+RPM: BinaryRoot base_rpm_file_list
+	cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
+	perl lpml_parse.pl make_rpm $(CATEGORY) $(DIST) $(SOURCE) $(TARGET) \
+	> base_customizerpm.xml
+	cat base_rpm_file_list.txt | perl make_rpm.pl base 3.2 '' '' \
+	BinaryRoot base_customizerpm.xml
+
+DPKG:
+	make TARGET='lon-capa-$(VERSION)' NORESTORECONF='1' install
+	@echo "You will next need to follow instructions at:"
+	@echo "http://people.debian.org/~jaldhar/make_package1.html"
+	@echo "A directory with a snapshot of the debian package files"
+	@echo "is LON-CAPA-base."
+# What DPKG steps need to happen (for future implementation):
+# export EMAIL="" ... probably sharrison@mail.lon-capa.org
+# deb-make
+# edit debian/control
+# make debian/dirs file
+# make debian/copyright file
+# debian/README.debian... point them to LON-CAPA URLS
+# debian/changelog
+# debian/conffiles
+# debuild
+# and maybe do some GPG-related steps around here
+
+base_rpm_file_list:
+	cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
+	perl lpml_parse.pl rpm_file_list $(CATEGORY) $(DIST) $(SOURCE) \
+	'BinaryRoot' | sort > base_rpm_file_list.txt
+
+BinaryRoot: base_rpm_file_list
+	make TARGET='BinaryRoot' NORESTORECONF='1' install
+
+# ======================================== *** MASTER DOCUMENTATION TARGETS ***
+
+# Generates CVS:loncom/build/docs; root location of install.lon-capa.org
+doc:
+	install -d docs
+	@if (test -e installation_manual.pdf); then \
+		cp -vf installation_manual.pdf docs/.; \
+	else \
+		touch docs/installation_manual.pdf; \
+	fi
+	install -m 0755 -d docs/icons
+	install -m 0644 $(SOURCE)/doc/icons/[^C][^V]* docs/icons
+	install -m 0755 -d docs/reconfig
+	cd docs; ln -fs installation_manual.pdf index.pdf
+	cd docs/reconfig; ln -fs ../installation_manual.pdf index.pdf
+	perl doc_template.pl $(SOURCE)/doc/templates/template.html \
+		$(SOURCE)/doc/build/reconfig.html > docs/reconfig/index.html
+	install -m 0755 -d docs/reconfig/confexamples
+	install -m 0644 $(SOURCE)/doc/build/confexamples/[^C][^V]* \
+		docs/reconfig/confexamples
+	perl doc_template.pl $(SOURCE)/doc/templates/template.html \
+		$(SOURCE)/doc/build/installindex.html > docs/index.html
+	install -m 0755 -d docs/license
+	cd docs/license; ln -fs ../installation_manual.pdf index.pdf
+	perl doc_template.pl $(SOURCE)/doc/templates/template.html \
+		$(SOURCE)/doc/build/license.html > docs/license/index.html
+	install -m 0755 -d docs/contact
+	cd docs/contact; ln -fs ../installation_manual.pdf index.pdf
+	perl doc_template.pl $(SOURCE)/doc/templates/template.html \
+		$(SOURCE)/doc/build/contact.html > docs/contact/index.html
+	install -m 0755 -d docs/faq
+	cd docs/faq; ln -fs ../installation_manual.pdf index.pdf
+	perl doc_template.pl $(SOURCE)/doc/templates/template.html \
+		$(SOURCE)/doc/build/faq.html > docs/faq/index.html
+	install -m 0755 -d docs/downloads
+	cd docs/downloads; ln -fs ../installation_manual.pdf download.pdf
+	perl doc_template.pl $(SOURCE)/doc/templates/template.html \
+		$(SOURCE)/doc/build/download.html > docs/downloads/index.html
+	install -m 0755 -d docs/install
+	cd docs/install; ln -fs ../installation_manual.pdf install.pdf
+	perl doc_template.pl $(SOURCE)/doc/templates/template.html \
+		$(SOURCE)/doc/build/install.html > docs/install/index.html
+	cp -v $(SOURCE)/doc/install/redhat7.3/new_install_rh73.html \
+		docs/install/rh73.html
+	cp -v $(SOURCE)/doc/install/redhat7.3/new_install_rh73.html \
+		docs/downloads/rh73.html
+	install -m 0755 -d docs/upgrade
+	cd docs/upgrade; ln -fs ../installation_manual.pdf upgrade.pdf
+	perl doc_template.pl $(SOURCE)/doc/templates/template.html \
+		$(SOURCE)/doc/build/upgrade.html > docs/upgrade/index.html
+	cd docs; tar czvpf ../docs.tar.gz .
+
+pdfdoc: TEST_html2ps
+	install -d pdfdoc
+	/usr/local/html2ps/bin/html2ps -D \
+	$(SOURCE)/doc/build/installindex_noform.html > pdfdoc/installindex.ps
+	/usr/local/html2ps/bin/html2ps -D \
+	$(SOURCE)/doc/build/reconfig.html | \
+	perl -nle 's/\[EXAMPLE\]/\[EXAMPLE \(at end of document\)\]/g;print' \
+	> pdfdoc/reconfig.ps
+	/usr/local/html2ps/bin/html2ps -D \
+	$(SOURCE)/doc/build/install.html > pdfdoc/install.ps
+	/usr/local/html2ps/bin/html2ps -D \
+	$(SOURCE)/doc/build/upgrade.html > pdfdoc/upgrade.ps
+	/usr/local/html2ps/bin/html2ps -D \
+	$(SOURCE)/doc/build/faq.html > pdfdoc/faq.ps
+	/usr/local/html2ps/bin/html2ps -D \
+	$(SOURCE)/doc/build/download.html > pdfdoc/download.ps
+	/usr/local/html2ps/bin/html2ps -D \
+	$(SOURCE)/doc/build/contact.html > pdfdoc/contact.ps
+	/usr/local/html2ps/bin/html2ps -D \
+	$(SOURCE)/doc/build/license.html > pdfdoc/license.ps
+#       This creates a bad confexamples.ps... so take the long way around
+#	cd $(SOURCE)/doc/build/confexamples; \
+#	mpage -P- -1 -H [^C]* > ../../../loncom/build/pdfdoc/confexamples.ps
+	install -d pdfdoc/confexamples
+	cd $(SOURCE)/doc/build/confexamples; \
+	find . -type f | cut -b3- | grep -v '^C' | grep -v 'keyword' | \
+	perl -nle \
+	'`mpage -P- -1 -H $$_ > ../../../loncom/build/pdfdoc/confexamples/$$_.ps`;'
+	echo '' > pdfdoc/contents.txt
+	echo '' >> pdfdoc/contents.txt
+	echo '          The Learning Online Network' >> pdfdoc/contents.txt
+	echo '                    with the' >> pdfdoc/contents.txt
+	echo '     Computer-Assisted Personalized Approach' >> \
+	pdfdoc/contents.txt
+	echo '' >> pdfdoc/contents.txt
+	echo '' >> pdfdoc/contents.txt
+	echo 'CONTENTS' >> pdfdoc/contents.txt
+	echo '--------' >> pdfdoc/contents.txt
+	echo 'Opening' >> pdfdoc/contents.txt
+	echo 'Configuration' >> pdfdoc/contents.txt
+	echo 'Installation' >> pdfdoc/contents.txt
+	echo 'Upgrading a LON-CAPA Server' >> pdfdoc/contents.txt
+	echo 'FAQ' >> pdfdoc/contents.txt
+	echo 'Download' >> pdfdoc/contents.txt
+	echo 'Contact Information' >> pdfdoc/contents.txt
+	echo 'License Information' >> pdfdoc/contents.txt
+	echo 'Configuration Examples' >> pdfdoc/contents.txt
+	mpage -P- -1 \
+	pdfdoc/contents.txt \
+	pdfdoc/installindex.ps \
+	pdfdoc/reconfig.ps \
+	pdfdoc/install.ps \
+	pdfdoc/upgrade.ps \
+	pdfdoc/faq.ps \
+	pdfdoc/download.ps \
+	pdfdoc/contact.ps \
+	pdfdoc/license.ps \
+	pdfdoc/confexamples/*.ps \
+	> pdfdoc/installation_manual.ps
+	ps2pdf pdfdoc/installation_manual.ps pdfdoc/installation_manual.pdf
+	mv -vf pdfdoc/installation_manual.pdf .
 
-BinaryRoot:
-	perl parse.pl ../../doc/loncapafiles/loncapafiles.html BinaryRoot
+# ================================================ *** KEEPING THINGS CLEAN ***
 
 clean:
+	rm -f buildflag
 	rm -Rf HTML
-	rm -f *.spec
-	rm -f LCMakefile
+	rm -f installation_manual.pdf
+	rm -f Makefile.build
+	rm -f Makefile.install
+	rm -f Makefile.configinstall
 	rm -Rf BinaryRoot
-	rm -f Makefile.BinaryRoot
+	rm -Rf SetupBinaryRoot
+	rm -Rf LON-CAPA-base
+	rm -f base_rpm_file_list.txt
+	rm -f base_customizerpm.xml
+	rm -f setup_rpm_file_list.txt
+	rm -f docs.tar.gz
+	rm -Rf docs
+	rm -Rf pdfdoc
+	rm -f program.pl*
+	rm -Rf lpmladm.*
+	rm -f WARNINGS
+	rm -f $(SOURCE)/loncom/build/hosts.tab
+
+reallyclean:
+	rm -f buildflag
+	rm -f $(SOURCE)/README
+	rm -f $(SOURCE)/UPDATE
+	rm -f $(SOURCE)/TEST
+	rm -f $(SOURCE)/MANIFEST
+	rm -f $(SOURCE)/MANIFEST_loncapa
+	rm -f $(SOURCE)/loncapa
+	rm -f $(SOURCE)/loncom/build/hosts.tab
+	rm -f $(SOURCE)/loncapa.tar.gz
+	rm -Rf HTML
+	rm -f installation_manual.pdf
 	rm -f Makefile.build
 	rm -f Makefile.install
+	rm -f Makefile.configinstall
+	rm -Rf BinaryRoot
+	rm -Rf SetupBinaryRoot
+	rm -Rf LON-CAPA-base
+	rm -f base_rpm_file_list.txt
+	rm -f base_customizerpm.xml
+	rm -f setup_rpm_file_list.txt
+	rm -f docs.tar.gz
+	rm -Rf docs
+	rm -Rf pdfdoc
+	rm -f program.pl*
+	rm -Rf lpmladm.*
+	make -f Makefile.cvs clean
+	rm -f WARNINGS
+
+# ================================================ *** A HELPFUL DEPENDENCY ***
+alwaysrun: