loncom/build/Makefile - diff

Return to Makefile CVS log

Up to [LON-CAPA] / loncom / build

Diff for /loncom/build/Makefile between versions 1.140 and 1.187

version 1.140, 2003/01/13 00:17:24	version 1.187, 2008/09/12 14:01:15
Line 1	Line 1
# The LearningOnline Network with CAPA	# The LearningOnline Network with CAPA

# Scott Harrison, your friendly neighborhood volunteer
# $Id$	# $Id$

# TYPICAL USAGE of this Makefile is primarily for two targets:	# TYPICAL USAGE of this Makefile is primarily for two targets:
Line 23 SAVE=program.pl.$(TIMESTAMP)	Line 22 SAVE=program.pl.$(TIMESTAMP)
LAUNCHSAVE=$(OUTSTREAM) $(SAVE)	LAUNCHSAVE=$(OUTSTREAM) $(SAVE)
METAMTARGET=""	METAMTARGET=""
MTARGET=""	MTARGET=""
VERSION=0.6	VERSION=CVS_HEAD
	# The current working definition for "RELEASE" is: changes not in the software,
	# but in the operating system dependent packaging of the software. Thus, the
	# generic tarball releases do not need to have a release number specified.
	RELEASE=1 # As a general rule for now, this is always being set to "1".
DIRTARGET=loncapa-$(VERSION)	DIRTARGET=loncapa-$(VERSION)
	LOCALAUTHPATH=/home/httpd/lib/perl

# =============================================== Help targets for the Makefile	# =============================================== Help targets for the Makefile
# If 'make' is run without any arguments, the 'help' target is called since	# If 'make' is run without any arguments, the 'help' target is called since
Line 87 help_TARGETS:	Line 91 help_TARGETS:
@echo " (horizontal testing)"	@echo " (horizontal testing)"
@echo "TEST_web_layer: mimic a login and various vertical actions on "	@echo "TEST_web_layer: mimic a login and various vertical actions on "
@echo " a LON-CAPA system"	@echo " a LON-CAPA system"
@echo "TEST_hosts_tab: make sure that a loncapa/loncom/hosts.tab"	@echo "TEST_hosts_and_domain_tab: make sure that a "
@echo " file is specified for installation"	@echo " loncapa/loncom/hosts.tab and loncapa/loncom/domain.tab"
	@echo " file is specified for installation"
@echo "TEST_html2ps: test for the presence of html2ps which is needed"	@echo "TEST_html2ps: test for the presence of html2ps which is needed"
@echo " for making a PDF compilation for pdfdoc"	@echo " for making a PDF compilation for pdfdoc"
@echo "* GENERAL TARGETS SUCH AS 'build' AND 'install' *"	@echo "* GENERAL TARGETS SUCH AS 'build' AND 'install' *"
Line 103 help_TARGETS:	Line 108 help_TARGETS:
@echo "rawinstall: just install files, links and directories without"	@echo "rawinstall: just install files, links and directories without"
@echo " any bells or whistles (e.g. double-checking"	@echo " any bells or whistles (e.g. double-checking"
@echo " configurations, fine-tuning webserver, etc.)"	@echo " configurations, fine-tuning webserver, etc.)"
@echo "hosts_tab: install the hosts.tab to the filesystem"	@echo "hosts_and_domain_tab: install the hosts.tab and domain.tab"
	@echo " to the filesystem"
@echo "webserverconf: fine-tune the web server configuration;"	@echo "webserverconf: fine-tune the web server configuration;"
@echo " make sure the proper 'Include' statements"	@echo " make sure the proper 'Include' statements"
@echo " are appended to httpd.conf"	@echo " are appended to httpd.conf"
Line 113 help_TARGETS:	Line 119 help_TARGETS:
@echo " system"	@echo " system"
@echo "sanitycheck: probe for common errors and recommend fixes to"	@echo "sanitycheck: probe for common errors and recommend fixes to"
@echo " the user"	@echo " the user"
	@echo "logcleanup: clean spurious logfile entries"
	@echo "clean_file_permissions: Remove erroneous keys from the "
	@echo " file_permissions.db"
	@echo "accesscount_seed: Migrate the access counting mechanism from "
	@echo " nohist_reseval.db to nohist_accesscount.db."
	@echo "modify_config_files: Perform automatic update of the "
	@echo " configuration files for yum and MySQL."
	@echo "ntpcheck: test to see if ntp is installed and running."
	@echo "html_parser_check: test functionality of HTML::Parser."
	@echo "math_random_check: test functionality of Math::Random."
	@echo "cron_lpmlcheck: remove cron file /etc/cron.d/loncapa.lpml."
	@echo "chkconfig: test runlevels of httpd and loncontrol."
	@echo "rpmcheck: test to see if rpms known to confict are installed."
	@echo "wrap_setuid: put a C wrapper around setuid scripts."
	@echo "latex_fixup: regenerate ls-R database for the latex base."
@echo "updatequery: solicit the user for machine configuration"	@echo "updatequery: solicit the user for machine configuration"
@echo " information; to be incorporated during an update"	@echo " information; to be incorporated during an update"
@echo " procedure (via the UPDATE command)"	@echo " procedure (via the UPDATE command)"
@echo "postinstall: double-check things after installation"	@echo "postinstall: double-check things after installation"
@echo "VERSION: tag the filesystem with version information inside"	@echo "VERSION: tag the filesystem with version information inside"
@echo " /etc/loncapa-release"	@echo " /etc/loncapa-release and"
	@echo " /home/httpd/html/lon-status/version.txt"
@echo "aboutVERSION: place version information inside about.html"	@echo "aboutVERSION: place version information inside about.html"
	@echo " and loncapa_apache.conf"
@echo "*** Makefile.* TARGETS BUILT DYNAMICALLY FROM loncapafiles.lpml ***"	@echo "*** Makefile.* TARGETS BUILT DYNAMICALLY FROM loncapafiles.lpml ***"
@echo "Makefile.configinstall: generate a Makefile for configuration"	@echo "Makefile.configinstall: generate a Makefile for configuration"
@echo " files; built dynamically from"	@echo " files; built dynamically from"
Line 134 help_TARGETS:	Line 157 help_TARGETS:
@echo "* TARGETS FOR OPERATING ON FILESYSTEMS ACROSS THE NETWORK *"	@echo "* TARGETS FOR OPERATING ON FILESYSTEMS ACROSS THE NETWORK *"
@echo "lpmladm: coordinates username=lpmladm mediated secure shell"	@echo "lpmladm: coordinates username=lpmladm mediated secure shell"
@echo " processes; needed for the NET_* targets"	@echo " processes; needed for the NET_* targets"
@echo "NET_hosts_tab: install the hosts.tab to a filesystem elsewhere"	@echo "NET_hosts_and_domain_tab: install the hosts.tab and domain.tab"
@echo " on the network"	@echo " to a filesystem elsewhere"
	@echo " on the network"
@echo "NET_webserverconf: fine-tune the web server configuration on a"	@echo "NET_webserverconf: fine-tune the web server configuration on a"
@echo " filesystem elsewhere on the network"	@echo " filesystem elsewhere on the network"
@echo "NET_rawinstall: launch the rawinstall target on a filesystem"	@echo "NET_rawinstall: launch the rawinstall target on a filesystem"
Line 195 help_TARGETS:	Line 219 help_TARGETS:
@echo " instructor data (NOT YET IMPLEMENTED)"	@echo " instructor data (NOT YET IMPLEMENTED)"
@echo "restore: reseeds a LON-CAPA server with tarball backups "	@echo "restore: reseeds a LON-CAPA server with tarball backups "
@echo " generated by \"make backup\" (NOT YET IMPLEMENTED)"	@echo " generated by \"make backup\" (NOT YET IMPLEMENTED)"
	@echo "* AUXILIARY TESTS *"
	@echo "localauth: tests to see if localauth exists or not and run"
	@echo " appropriate tests"
@echo "* A HELPFUL DEPENDENCY *"	@echo "* A HELPFUL DEPENDENCY *"
@echo "alwaysrun: blank target that is a dependency for targets"	@echo "alwaysrun: blank target that is a dependency for targets"
@echo " that should \"always run\""	@echo " that should \"always run\""
Line 223 TEST_hosts_tab:	Line 250 TEST_hosts_tab:
else echo "** ERROR ** hosts.tab not defined!" && \	else echo "** ERROR ** hosts.tab not defined!" && \
echo -n "You need to do one of the following within your " && \	echo -n "You need to do one of the following within your " && \
echo "CVS repository (cd loncapa/loncom)" && \	echo "CVS repository (cd loncapa/loncom)" && \
echo " 1) ln -s production_hosts.tab hosts.tab" && \	echo " 1) ln -s production_dns_hosts.tab dns_hosts.tab" && \
echo " 2) ln -s development_hosts.tab hosts.tab" && \	echo " 2) ln -s development_dns_hosts.tab dns_hosts.tab" && \
echo "or 3) ln -s rawhide_hosts.tab hosts.tab" && \	echo "or 3) ln -s rawhide_hosts.tab hosts.tab" && \
echo "(you most likely want option #1, production_hosts.tab)" && \	echo "(you most likely want option #1, production_hosts.tab)" && \
exit 1; \	exit 1; \
fi	fi

	TEST_domain_tab:
	@echo "Testing domain.tab"
	@if (test -e ../domain.tab); then \
	echo "there is a defined link or file; assume okay"; \
	else echo "** ERROR ** domain.tab not defined!" && \
	echo -n "You need to do one of the following within your " && \
	echo "CVS repository (cd loncapa/loncom)" && \
	echo " 1) ln -s production_dns_domain.tab dns_domain.tab" && \
	echo " 2) ln -s development_dns_domain.tab dns_domain.tab" && \
	echo "or 3) ln -s rawhide_domain.tab domain.tab" && \
	echo "(you most likely want option #1, production_domain.tab)" && \
	exit 1; \
	fi

TEST_html2ps:	TEST_html2ps:
@if (test -e /usr/local/html2ps/bin/html2ps); then \	@if (test -e /usr/local/html2ps/bin/html2ps); then \
echo "I can find html2ps; assume okay"; \	echo "I can find html2ps; assume okay"; \
Line 261 configinstall: Makefile.configinstall	Line 302 configinstall: Makefile.configinstall
if (test "0" = $(NORESTORECONF)); then \	if (test "0" = $(NORESTORECONF)); then \
perl loncaparestoreconfigurations suffix .lpmlnew; fi	perl loncaparestoreconfigurations suffix .lpmlnew; fi

install: buildflag VERSION TEST_hosts_tab Makefile.install Makefile	install: buildflag VERSION TEST_hosts_tab TEST_domain_tab Makefile.install Makefile
echo -n "" > WARNINGS	echo -n "" > WARNINGS
make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" \	make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" \
directories	directories
Line 271 install: buildflag VERSION TEST_hosts_ta	Line 312 install: buildflag VERSION TEST_hosts_ta
NORESTORECONF="$(NORESTORECONF)" configinstall	NORESTORECONF="$(NORESTORECONF)" configinstall
make postinstall	make postinstall
make warningnote	make warningnote
echo "You can run 'make test' to see if your system is ready to go!"	@echo "You can now run 'make test' to see if your system is ready to go!"
echo "NOTE THAT YOUR SYSTEM MUST HAVE MYSQL WITH A USER=\"www\" AND"	# @echo "NOTE THAT YOUR SYSTEM MUST HAVE MYSQL WITH A USER=\"www\" AND"
echo -n "PASSWORD=\"localhostkey\" FOR www\@localhost"	# @echo -n "PASSWORD=\"localhostkey\" FOR www\@localhost"
echo -n "(YOU MAY NEED TO REINITIALIZE YOUR MYSQL www\@localhost USER)"	# @echo -n "(YOU MAY NEED TO REINITIALIZE YOUR MYSQL www\@localhost USER)"
echo -n "Please see http://install.lon-capa.org/ for more information"	# @echo -n "Please see http://install.lon-capa.org/ for more information"

rawinstall: VERSION Makefile.install Makefile	rawinstall: VERSION Makefile.install Makefile
echo -n "" > WARNINGS	echo -n "" > WARNINGS
Line 286 rawinstall: VERSION Makefile.install Mak	Line 327 rawinstall: VERSION Makefile.install Mak
make SOURCE="$(SOURCE)" TARGET="$(TARGET)" \	make SOURCE="$(SOURCE)" TARGET="$(TARGET)" \
NORESTORECONF="$(NORESTORECONF)" configinstall	NORESTORECONF="$(NORESTORECONF)" configinstall

hosts_tab: TEST_hosts_tab	hosts_and_domain_tab: TEST_hosts_tab TEST_domain_tab
cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml \| \	cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml \| \
perl xfml_parse.pl $(SOURCE)/doc/loncapafiles/valid_hosts.xfml \| \	perl xfml_parse.pl $(SOURCE)/doc/loncapafiles/valid_hosts.xfml \| \
perl lpml_parse.pl install $(CATEGORY) $(DIST) "$(SOURCE)" \	perl lpml_parse.pl install $(CATEGORY) $(DIST) "$(SOURCE)" \
"$(TARGET)" > Makefile.install	"$(TARGET)" > Makefile.install
make -f Makefile.install directories	make -f Makefile.install directories
make -f Makefile.install files	make -f Makefile.install files
@echo "If hosts.tab has changed, restart httpd and loncontrol:"	@echo "If hosts.tab or domain.tab has changed, restart httpd and loncontrol:"
@echo " /etc/rc.d/init.d/httpd restart"	@echo " /etc/rc.d/init.d/httpd restart"
@echo " /etc/rc.d/init.d/loncontrol restart"	@echo " /etc/rc.d/init.d/loncontrol restart"

webserverconf:	webserverconf:
cat $(SOURCE)/doc/loncapafiles/webserver.piml \| \	cat $(SOURCE)/doc/loncapafiles/webserver.piml \| \
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH)	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) \| \
	tee -a WARNINGS

# ---------------- Top-level files such as README, UPDATE, CHECKRPMS, and TEST	# ---------------- Top-level files such as README, UPDATE, CHECKRPMS, and TEST
vanillatar:	vanillatar:
# --------------------------- Point UPDATE to the internal make process	# --------------------------- Point UPDATE to the internal make process
echo '#!/bin/sh' > $(SOURCE)/UPDATE	cp $(SOURCE)/loncom/UPDATE $(SOURCE)/UPDATE
echo 'touch loncom/build/WARNINGS' >> $(SOURCE)/UPDATE;
echo 'ln -s loncom/build/WARNINGS WARNINGS' >> $(SOURCE)/UPDATE;
echo 'cd loncom/build; make build' >> $(SOURCE)/UPDATE
echo 'make rawinstall' >> $(SOURCE)/UPDATE
echo 'make configinstall' >> $(SOURCE)/UPDATE
echo 'make updatequery' >> $(SOURCE)/UPDATE
echo 'make hosts_tab' >> $(SOURCE)/UPDATE
echo 'make postinstall' >> $(SOURCE)/UPDATE
echo 'make aboutVERSION' >> $(SOURCE)/UPDATE
echo 'make warningnote' >> $(SOURCE)/UPDATE
# ----------------------------- Point TEST to the internal make process	# ----------------------------- Point TEST to the internal make process
echo '#!/bin/sh' > $(SOURCE)/TEST	echo '#!/bin/sh' > $(SOURCE)/TEST
echo 'cd loncom/build; make test' >> $(SOURCE)/TEST	echo 'cd loncom/build; make test' >> $(SOURCE)/TEST
Line 326 vanillatar:	Line 358 vanillatar:
chmod a+rx $(SOURCE)/TEST	chmod a+rx $(SOURCE)/TEST
chmod a+rx $(SOURCE)/CHECKRPMS	chmod a+rx $(SOURCE)/CHECKRPMS
# -------------------------------- Copy README to the vanilla top-level	# -------------------------------- Copy README to the vanilla top-level
cp -v $(SOURCE)/doc/shortest_path_redhat7.2.txt $(SOURCE)/README	#cp -v $(SOURCE)/doc/shortest_path_redhat7.2.txt $(SOURCE)/README

tardist:	tardist:
make MANIFEST_all	make MANIFEST_all
Line 340 tardist:	Line 372 tardist:
fi	fi
cp -v $(SOURCE)/loncom/license/about.html \	cp -v $(SOURCE)/loncom/license/about.html \
$(SOURCE)/loncom/license/about.html.orig	$(SOURCE)/loncom/license/about.html.orig
	cp -v $(SOURCE)/loncom/loncapa_apache.conf \
	$(SOURCE)/loncom/loncapa_apache.conf.orig
make aboutVERSION	make aboutVERSION
cd $(SOURCE); \	cd $(SOURCE); \
tar --no-recursion --numeric-owner --files-from MANIFEST \	tar --no-recursion --numeric-owner --files-from MANIFEST \
-h -czf $(DIRTARGET).tar.gz 2>tar_WARNINGS \|\| [ "0" == "0" ]	-h -czf $(DIRTARGET).tar.gz 2>tar_WARNINGS \|\| [ "0" == "0" ]
mv -v $(SOURCE)/loncom/license/about.html.orig \	mv -v $(SOURCE)/loncom/license/about.html.orig \
$(SOURCE)/loncom/license/about.html	$(SOURCE)/loncom/license/about.html
	mv -v $(SOURCE)/loncom/loncapa_apache.conf.orig \
	$(SOURCE)/loncom/loncapa_apache.conf
cat $(SOURCE)/tar_WARNINGS \| \	cat $(SOURCE)/tar_WARNINGS \| \
xargs --replace=XXX echo '** WARNING ** XXX' > WARNINGS	xargs --replace=XXX echo '** WARNING ** XXX' > WARNINGS
rm -f $(SOURCE)/tar_WARNINGS	rm -f $(SOURCE)/tar_WARNINGS
make warningnote	make warningnote

	ntpcheck:
	cat $(SOURCE)/doc/loncapafiles/ntpcheck.piml \| \
	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) \| \
	tee -a WARNINGS

	html_parser_check:
	cat $(SOURCE)/doc/loncapafiles/html_parser_check.piml \| \
	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) \| \
	tee -a WARNINGS

	math_random_check:
	cat $(SOURCE)/doc/loncapafiles/math_random_check.piml \| \
	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) \| \
	tee -a WARNINGS

	cron_lpmlcheck:
	cat $(SOURCE)/doc/loncapafiles/cron_lpmlcheck.piml \| \
	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) \| \
	tee -a WARNINGS

	chkconfig:
	cat $(SOURCE)/doc/loncapafiles/chkconfig.piml \| \
	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) \| \
	tee -a WARNINGS

	rpmcheck:
	cat $(SOURCE)/doc/loncapafiles/rpmcheck.piml \| \
	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) \| \
	tee -a WARNINGS

sanitycheck:	sanitycheck:
cat $(SOURCE)/doc/loncapafiles/sanitycheck.piml \| \	cat $(SOURCE)/doc/loncapafiles/sanitycheck.piml \| \
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) \| \	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) \| \
tee -a WARNINGS	tee -a WARNINGS

	logcleanup:
	cat $(SOURCE)/doc/loncapafiles/logcleanup.piml \| \
	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) \| \
	tee -a WARNINGS

updatequery:	updatequery:
cat $(SOURCE)/doc/loncapafiles/updatequery.piml \| \	cat $(SOURCE)/doc/loncapafiles/updatequery.piml \| \
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(QUERYLAUNCH)	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(QUERYLAUNCH)

	run_searchcat:
	cat $(SOURCE)/doc/loncapafiles/run_searchcat.piml \| \
	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(QUERYLAUNCH)

	clean_file_permissions:
	cat $(SOURCE)/doc/loncapafiles/clean_file_permissions.piml \| \
	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) \| \
	tee -a WARNINGS

	accesscount_seed:
	cat $(SOURCE)/doc/loncapafiles/accesscount_seed.piml \| \
	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) \| \
	tee -a WARNINGS

	modify_config_files:
	cat $(SOURCE)/doc/loncapafiles/modify_config_files.piml \| \
	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) \| \
	tee -a WARNINGS

reseval_fixup:	reseval_fixup:
cat $(SOURCE)/doc/loncapafiles/reseval_fixup.piml \| \	cat $(SOURCE)/doc/loncapafiles/reseval_fixup.piml \| \
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) \| \	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) \| \
tee -a WARNINGS	tee -a WARNINGS

	update_queue_slots:
	cat $(SOURCE)/doc/loncapafiles/update_queue_slots.piml \| \
	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) \| \
	tee -a WARNINGS

clearoutoldspreadsheetcache:	clearoutoldspreadsheetcache:
cat $(SOURCE)/doc/loncapafiles/clearoutoldspreadsheetcache.piml \| \	cat $(SOURCE)/doc/loncapafiles/clearoutoldspreadsheetcache.piml \| \
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) \| \	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) \| \
Line 375 sendmail_fix:	Line 470 sendmail_fix:
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) \| \	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) \| \
tee -a WARNINGS	tee -a WARNINGS

	ownership_fix:
	cat $(SOURCE)/doc/loncapafiles/ownership_fix.piml \| \
	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) \| \
	tee -a WARNINGS

	wrap_setuid:
	cat $(SOURCE)/doc/loncapafiles/wrap_setuid.piml \| \
	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) \| \
	tee -a WARNINGS

	latex_fixup:
	cat $(SOURCE)/doc/loncapafiles/latex_fixup.piml \| \
	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) \| \
	tee -a WARNINGS

postinstall:	postinstall:
make webserverconf	make webserverconf
make reseval_fixup	make reseval_fixup
	make clean_file_permissions
	make accesscount_seed
	make update_queue_slots
	make modify_config_files
make clearoutoldspreadsheetcache	make clearoutoldspreadsheetcache
	make chkconfig
	make rpmcheck
	make ntpcheck
	make html_parser_check
	make cron_lpmlcheck
make sanitycheck	make sanitycheck
	make logcleanup
make sendmail_fix	make sendmail_fix
	make ownership_fix
	make wrap_setuid
	make latex_fixup
VERSION:	VERSION:
install -d $(TARGET)/etc	install -d $(TARGET)/etc
echo -n "LON-CAPA release $(VERSION)-" > $(TARGET)/etc/loncapa-release	echo -n "LON-CAPA release $(VERSION)-" > $(TARGET)/etc/loncapa-release
date +"%Y%m%d" >> $(TARGET)/etc/loncapa-release	date +"%Y%m%d" >> $(TARGET)/etc/loncapa-release
	install -d $(TARGET)/home/httpd/html/lon-status
	echo -n "$(VERSION)-" > $(TARGET)/home/httpd/html/lon-status/version.txt
	date +"%Y%m%d" >> $(TARGET)/home/httpd/html/lon-status/version.txt

aboutVERSION:	aboutVERSION:
cat $(SOURCE)/loncom/license/about.html \| \	cat $(SOURCE)/loncom/license/about.html \| \
perl -e '$$d=`date +"%Y%m%d"`;chomp($$d);while(<>){s/\<\!\-\- VERSION \-\-\>/$(VERSION)-$$d/; print;}' > \	perl -e '$$d=`date +"%Y%m%d%H"`;chomp($$d);while(<>){s/\<\!\-\- VERSION \-\-\>/$(VERSION)-$$d/; print;}' > \
$(SOURCE)/loncom/license/about.html.new	$(SOURCE)/loncom/license/about.html.new
mv -v $(SOURCE)/loncom/license/about.html.new \	mv -v $(SOURCE)/loncom/license/about.html.new \
$(SOURCE)/loncom/license/about.html	$(SOURCE)/loncom/license/about.html
	cat $(SOURCE)/loncom/loncapa_apache.conf \| \
	perl -e '$$d=`date +"%Y%m%d%H"`;chomp($$d);while(<>){s/\<\!\-\- VERSION \-\-\>/$(VERSION)-$$d/; print;}' > \
	$(SOURCE)/loncom/loncapa_apache.conf.new
	mv -v $(SOURCE)/loncom/loncapa_apache.conf.new \
	$(SOURCE)/loncom/loncapa_apache.conf

# ========= *** Makefile.* TARGETS BUILT DYNAMICALLY FROM loncapafiles.lpml ***	# ========= *** Makefile.* TARGETS BUILT DYNAMICALLY FROM loncapafiles.lpml ***

Line 444 lpmladm:	Line 574 lpmladm:
echo "** ERROR ** Incorrect METAMTARGET"; \	echo "** ERROR ** Incorrect METAMTARGET"; \
fi	fi

NET_hosts_tab:	NET_hosts_and_domain_tab:
make TIMESTAMP=`date +"%s"` METAMTARGET="TRANSPORT" \	make TIMESTAMP=`date +"%s"` METAMTARGET="TRANSPORT" \
MTARGET="hosts_tab" HOSTNAME="$(HOSTNAME)" lpmladm	MTARGET="hosts_and_domain_tab" HOSTNAME="$(HOSTNAME)" lpmladm

NET_webserverconf:	NET_webserverconf:
make TIMESTAMP=`date +"%s"` METAMTARGET="LAUNCH" \	make TIMESTAMP=`date +"%s"` METAMTARGET="LAUNCH" \
Line 470 MANIFEST_all:	Line 600 MANIFEST_all:
echo 'loncom/rawhide_hosts.tab' >> $(SOURCE)/MANIFEST	echo 'loncom/rawhide_hosts.tab' >> $(SOURCE)/MANIFEST
echo 'loncom/production_hosts.tab' >> $(SOURCE)/MANIFEST	echo 'loncom/production_hosts.tab' >> $(SOURCE)/MANIFEST
echo 'loncom/development_hosts.tab' >> $(SOURCE)/MANIFEST	echo 'loncom/development_hosts.tab' >> $(SOURCE)/MANIFEST
	echo 'loncom/production_domain.tab' >> $(SOURCE)/MANIFEST
	echo 'loncom/development_domain.tab' >> $(SOURCE)/MANIFEST
	echo 'loncom/production_dns_hosts.tab' >> $(SOURCE)/MANIFEST
	echo 'loncom/development_dns_hosts.tab' >> $(SOURCE)/MANIFEST
	echo 'loncom/production_dns_domain.tab' >> $(SOURCE)/MANIFEST
	echo 'loncom/development_dns_domain.tab' >> $(SOURCE)/MANIFEST
# ------------------ Files needed for dynamically generated directories	# ------------------ Files needed for dynamically generated directories
echo 'doc/man' >> $(SOURCE)/MANIFEST	echo 'doc/man' >> $(SOURCE)/MANIFEST
echo 'doc/lib' >> $(SOURCE)/MANIFEST	echo 'doc/lib' >> $(SOURCE)/MANIFEST
Line 495 MANIFEST_cvs:	Line 631 MANIFEST_cvs:
# ------------------- MANIFEST the building, testing and standard loncapa files	# ------------------- MANIFEST the building, testing and standard loncapa files
MANIFEST_lpml:	MANIFEST_lpml:
cat $(SOURCE)/doc/loncapafiles/buildfiles.lpml \| \	cat $(SOURCE)/doc/loncapafiles/buildfiles.lpml \| \
perl lpml_parse.pl MANIFEST development default \	perl lpml_parse.pl MANIFEST development $(DIST) \
'$(SOURCE)' '$(TARGET)' \| grep '[[:alnum:]]' >> $(SOURCE)/MANIFEST	'$(SOURCE)' '$(TARGET)' \| grep '[[:alnum:]]' >> $(SOURCE)/MANIFEST
cat $(SOURCE)/doc/loncapafiles/testfiles.lpml \| \	cat $(SOURCE)/doc/loncapafiles/testfiles.lpml \| \
perl lpml_parse.pl MANIFEST development default \	perl lpml_parse.pl MANIFEST development $(DIST) \
'$(SOURCE)' '$(TARGET)' \| grep '[[:alnum:]]' >> $(SOURCE)/MANIFEST	'$(SOURCE)' '$(TARGET)' \| grep '[[:alnum:]]' >> $(SOURCE)/MANIFEST
cat $(SOURCE)/doc/loncapafiles/installfiles.lpml \| \	cat $(SOURCE)/doc/loncapafiles/installfiles.lpml \| \
perl lpml_parse.pl MANIFEST development default \	perl lpml_parse.pl MANIFEST development $(DIST) \
'$(SOURCE)' '$(TARGET)' \| grep '[[:alnum:]]' >> $(SOURCE)/MANIFEST	'$(SOURCE)' '$(TARGET)' \| grep '[[:alnum:]]' >> $(SOURCE)/MANIFEST
cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml \| \	cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml \| \
perl lpml_parse.pl MANIFEST development default \	perl lpml_parse.pl MANIFEST development $(DIST) \
'$(SOURCE)' '$(TARGET)' \| grep '[[:alnum:]]' >> $(SOURCE)/MANIFEST	'$(SOURCE)' '$(TARGET)' \| grep '[[:alnum:]]' >> $(SOURCE)/MANIFEST

# ------------ Files for top-level (the vanilla layer that the user first sees)	# ------------ Files for top-level (the vanilla layer that the user first sees)
Line 571 RPM: BinaryRoot base_rpm_file_list	Line 707 RPM: BinaryRoot base_rpm_file_list
cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml \| \	cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml \| \
perl lpml_parse.pl make_rpm $(CATEGORY) $(DIST) $(SOURCE) $(TARGET) \	perl lpml_parse.pl make_rpm $(CATEGORY) $(DIST) $(SOURCE) $(TARGET) \
> base_customizerpm.xml	> base_customizerpm.xml
cat base_rpm_file_list.txt \| perl make_rpm.pl base $(VERSION) 1 '' '' \	cat base_rpm_file_list.txt \| perl make_rpm.pl base $(VERSION) \
BinaryRoot base_customizerpm.xml	$(RELEASE) '' '' BinaryRoot base_customizerpm.xml

DPKG:	DPKG:
make TARGET='lon-capa-$(VERSION)' NORESTORECONF='1' install	make TARGET='lon-capa-$(VERSION)' NORESTORECONF='1' install
Line 602 BinaryRoot: base_rpm_file_list	Line 738 BinaryRoot: base_rpm_file_list

# ======================================== * MASTER DOCUMENTATION TARGETS *	# ======================================== * MASTER DOCUMENTATION TARGETS *

	buildwebsite:
	cd ../../doc/build; perl ./generate_web_pages.pl


# Generates CVS:loncom/build/docs; root location of install.lon-capa.org	# Generates CVS:loncom/build/docs; root location of install.lon-capa.org
doc:	doc:
install -d docs	install -d docs
Line 785 backup:	Line 925 backup:
restore:	restore:
@echo "Not yet implemented"	@echo "Not yet implemented"

	# ===================================================== * AUXILIARY TESTS *
	localauth:
	@if (test -e $(LOCALAUTHPATH)/localauth.pm) && \
	!(diff $(LOCALAUTHPATH)/localauth-std.pm \
	$(LOCALAUTHPATH)/localauth.pm > /dev/null); then \
	echo "** WARNING ** $(LOCALAUTHPATH)/localauth.pm is different than the $(LOCALAUTHPATH)/localauth-std.pm; if you have not customized localauth.pm, then please manually overwrite localauth.pm (rm $(LOCALAUTHPATH)/localauth.pm; ln -s $(LOCALAUTHPATH)/localauth-std.pm $(LOCALAUTHPATH)/localauth.pm); if you have customized localauth.pm, then please double-check to see that your customized localauth.pm is compatible with any localauth-std.pm changes for this version of LON-CAPA"\| tee -a WARNINGS; \
	elif (test -e $(LOCALAUTHPATH)/localauth.pm) && \
	(diff $(LOCALAUTHPATH)/localauth-std.pm \
	$(LOCALAUTHPATH)/localauth.pm > /dev/null); then \
	echo "** NOTE ** LOCAL AUTH IS IDENTICAL WITH STANDARD TEMPLATE"\| tee -a WARNINGS; \
	elif !(test -e $(LOCALAUTHPATH)/localauth.pm) && \
	(test -e $(LOCALAUTHPATH)/localauth-std.pm); then \
	ln -s $(LOCALAUTHPATH)/localauth-std.pm $(LOCALAUTHPATH)/localauth.pm; \
	fi

# ================================================ * A HELPFUL DEPENDENCY *	# ================================================ * A HELPFUL DEPENDENCY *
alwaysrun:	alwaysrun:

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>

Removed from v.1.140
changed lines
	Added in v.1.187