--- loncom/build/Makefile	2005/12/28 21:41:22	1.177.4.3
+++ loncom/build/Makefile	2011/03/10 16:08:20	1.194
@@ -1,6 +1,6 @@
 # The LearningOnline Network with CAPA
 
-# $Id: Makefile,v 1.177.4.3 2005/12/28 21:41:22 albertel Exp $
+# $Id: Makefile,v 1.194 2011/03/10 16:08:20 raeburn Exp $
 
 # TYPICAL USAGE of this Makefile is primarily for two targets:
 # "make build" and "make install".
@@ -22,7 +22,13 @@ SAVE=program.pl.$(TIMESTAMP)
 LAUNCHSAVE=$(OUTSTREAM) $(SAVE)
 METAMTARGET=""
 MTARGET=""
-VERSION=2.1.0
+VERSION=CVS_HEAD
+SHOWVERSION=$(VERSION)
+NEXTVERSION=2.11
+ifeq (CVS_HEAD,${VERSION})
+SHOWVERSION=$(NEXTVERSION).$(VERSION)
+endif
+#
 # The current working definition for "RELEASE" is: changes not in the software,
 # but in the operating system dependent packaging of the software.  Thus, the
 # generic tarball releases do not need to have a release number specified.
@@ -128,10 +134,17 @@ help_TARGETS:
 	@echo "    configuration files for yum and MySQL."
 	@echo "ntpcheck: test to see if ntp is installed and running."
 	@echo "html_parser_check: test functionality of HTML::Parser."
+	@echo "math_random_check: test functionality of Math::Random."
 	@echo "cron_lpmlcheck: remove cron file /etc/cron.d/loncapa.lpml."
 	@echo "chkconfig: test runlevels of httpd and loncontrol."
 	@echo "rpmcheck: test to see if rpms known to confict are installed."
 	@echo "wrap_setuid: put a C wrapper around setuid scripts."
+        @echo "latex_fixup: regenerate ls-R database for the latex base."
+	@echo "picins_check: check for picins.sty, retrieve and rebuild"
+	@echo "             filename databases used by LaTeX"
+	@echo "mimetex_version_check: check if mimetex.cgi version has changed,"
+	@echo "                      if so remove files from mimetexcache."
+	@echo "latex_fmtutil: run utility to maintain TeX format files system-wide."
 	@echo "updatequery: solicit the user for machine configuration"
 	@echo "             information; to be incorporated during an update"
 	@echo "             procedure (via the UPDATE command)"
@@ -141,6 +154,8 @@ help_TARGETS:
 	@echo "         /home/httpd/html/lon-status/version.txt"
 	@echo "aboutVERSION: place version information inside about.html"
 	@echo "              and loncapa_apache.conf"
+	@echo "postaboutVERSION: restore default version <!-- VERSION --> to"
+	@echo "                  about.html and loncapa_apache.conf"
 	@echo "*** Makefile.* TARGETS BUILT DYNAMICALLY FROM loncapafiles.lpml ***"
 	@echo "Makefile.configinstall: generate a Makefile for configuration"
 	@echo "                        files; built dynamically from"
@@ -248,8 +263,8 @@ TEST_hosts_tab:
 	else echo "**** ERROR **** hosts.tab not defined!" && \
 	     echo -n "You need to do one of the following within your " && \
 	     echo "CVS repository (cd loncapa/loncom)" && \
-	     echo "   1) ln -s production_hosts.tab hosts.tab" && \
-	     echo "   2) ln -s development_hosts.tab hosts.tab" && \
+	     echo "   1) ln -s production_dns_hosts.tab dns_hosts.tab" && \
+	     echo "   2) ln -s development_dns_hosts.tab dns_hosts.tab" && \
 	     echo "or 3) ln -s rawhide_hosts.tab hosts.tab" && \
 	     echo "(you most likely want option #1, production_hosts.tab)" && \
 	     exit 1; \
@@ -262,8 +277,8 @@ TEST_domain_tab:
 	else echo "**** ERROR **** domain.tab not defined!" && \
 	     echo -n "You need to do one of the following within your " && \
 	     echo "CVS repository (cd loncapa/loncom)" && \
-	     echo "   1) ln -s production_domain.tab domain.tab" && \
-	     echo "   2) ln -s development_domain.tab domain.tab" && \
+	     echo "   1) ln -s production_dns_domain.tab dns_domain.tab" && \
+	     echo "   2) ln -s development_dns_domain.tab dns_domain.tab" && \
 	     echo "or 3) ln -s rawhide_domain.tab domain.tab" && \
 	     echo "(you most likely want option #1, production_domain.tab)" && \
 	     exit 1; \
@@ -302,6 +317,7 @@ configinstall: Makefile.configinstall
 
 install: buildflag VERSION TEST_hosts_tab TEST_domain_tab Makefile.install Makefile
 	echo -n "" > WARNINGS
+	make aboutVERSION
 	make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" \
 	directories
 	make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" files
@@ -344,18 +360,7 @@ webserverconf:
 # ---------------- Top-level files such as README, UPDATE, CHECKRPMS, and TEST
 vanillatar:
 	# --------------------------- Point UPDATE to the internal make process
-	echo '#!/bin/sh' > $(SOURCE)/UPDATE
-	echo 'touch loncom/build/WARNINGS' >> $(SOURCE)/UPDATE;
-	echo 'ln -s loncom/build/WARNINGS WARNINGS' >> $(SOURCE)/UPDATE;
-	echo 'cd loncom/build; make build' >> $(SOURCE)/UPDATE
-	echo 'make rawinstall' >> $(SOURCE)/UPDATE
-	echo 'make configinstall' >> $(SOURCE)/UPDATE
-	echo 'make updatequery' >> $(SOURCE)/UPDATE
-	echo 'make hosts_and_domain_tab' >> $(SOURCE)/UPDATE
-	echo 'make postinstall' >> $(SOURCE)/UPDATE
-	echo 'make run_searchcat' >> $(SOURCE)/UPDATE
-	echo 'make aboutVERSION' >> $(SOURCE)/UPDATE
-	echo 'make warningnote' >> $(SOURCE)/UPDATE
+	cp  $(SOURCE)/loncom/UPDATE $(SOURCE)/UPDATE
 	# ----------------------------- Point TEST to the internal make process
 	echo '#!/bin/sh' > $(SOURCE)/TEST
 	echo 'cd loncom/build; make test' >> $(SOURCE)/TEST
@@ -379,18 +384,11 @@ tardist:
 	else \
 		ln -s . $(DIRTARGET); \
 	fi
-	cp -v $(SOURCE)/loncom/license/about.html \
-	$(SOURCE)/loncom/license/about.html.orig
-	cp -v $(SOURCE)/loncom/loncapa_apache.conf \
-	$(SOURCE)/loncom/loncapa_apache.conf.orig
 	make aboutVERSION
 	cd $(SOURCE); \
 	tar --no-recursion --numeric-owner --files-from MANIFEST \
 	-h -czf $(DIRTARGET).tar.gz 2>tar_WARNINGS || [ "0" == "0" ]
-	mv -v $(SOURCE)/loncom/license/about.html.orig \
-	$(SOURCE)/loncom/license/about.html
-	mv -v $(SOURCE)/loncom/loncapa_apache.conf.orig \
-	$(SOURCE)/loncom/loncapa_apache.conf
+	make postaboutVERSION
 	cat $(SOURCE)/tar_WARNINGS | \
 	xargs --replace=XXX echo '**** WARNING **** XXX' > WARNINGS
 	rm -f $(SOURCE)/tar_WARNINGS
@@ -406,6 +404,11 @@ html_parser_check:
 	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
 	tee -a WARNINGS
 
+math_random_check:
+	cat $(SOURCE)/doc/loncapafiles/math_random_check.piml | \
+	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
+	tee -a WARNINGS
+
 cron_lpmlcheck:
 	cat $(SOURCE)/doc/loncapafiles/cron_lpmlcheck.piml | \
 	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
@@ -459,6 +462,11 @@ reseval_fixup:
 	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
 	tee -a WARNINGS
 
+update_queue_slots:
+	cat $(SOURCE)/doc/loncapafiles/update_queue_slots.piml | \
+	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
+	tee -a WARNINGS
+
 clearoutoldspreadsheetcache:
 	cat $(SOURCE)/doc/loncapafiles/clearoutoldspreadsheetcache.piml | \
 	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
@@ -479,11 +487,38 @@ wrap_setuid:
 	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
 	tee -a WARNINGS
 
+latex_fixup:
+	cat $(SOURCE)/doc/loncapafiles/latex_fixup.piml | \
+        perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
+        tee -a WARNINGS
+
+picins_check:
+	cat $(SOURCE)/doc/loncapafiles/picins_check.piml | \
+	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
+	tee -a WARNINGS
+
+mimetex_version_check:
+	cat $(SOURCE)/doc/loncapafiles/mimetex_version_check.piml | \
+	perl piml_parse.pl  $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
+	tee -a WARNINGS
+
+verify_domconfiguser:
+	cat $(SOURCE)/doc/loncapafiles/verify_domconfiguser.piml | \
+	perl piml_parse.pl  $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
+	tee -a WARNINGS
+
+latex_fmtutil:
+	cat $(SOURCE)/doc/loncapafiles/latex_fmtutil.piml | \
+	perl piml_parse.pl  $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
+	tee -a WARNINGS
+
 postinstall:
+	make postaboutVERSION
 	make webserverconf
 	make reseval_fixup
 	make clean_file_permissions
 	make accesscount_seed
+	make update_queue_slots
 	make modify_config_files
 	make clearoutoldspreadsheetcache
 	make chkconfig
@@ -496,7 +531,11 @@ postinstall:
 	make sendmail_fix
 	make ownership_fix
 	make wrap_setuid
-
+	make latex_fixup
+	make picins_check
+	make mimetex_version_check
+	make verify_domconfiguser
+	make latex_fmtutil 
 VERSION:
 	install -d $(TARGET)/etc
 	echo -n "LON-CAPA release $(VERSION)-" > $(TARGET)/etc/loncapa-release
@@ -506,17 +545,43 @@ VERSION:
 	date +"%Y%m%d" >> $(TARGET)/home/httpd/html/lon-status/version.txt
 
 aboutVERSION:
+	cp -v $(SOURCE)/loncom/license/about.html \
+	$(SOURCE)/loncom/license/about.html.orig
+	cp -v $(SOURCE)/loncom/loncapa_apache.conf \
+	$(SOURCE)/loncom/loncapa_apache.conf.orig
 	cat $(SOURCE)/loncom/license/about.html | \
-	perl -e '$$d=`date +"%Y%m%d"`;chomp($$d);while(<>){s/\<\!\-\- VERSION \-\-\>/$(VERSION)-$$d/; print;}' > \
+	perl -e '$$d=`date +"%Y%m%d%H"`;chomp($$d);while(<>){s/(\<\!\-\- VERSION \-\-\>|\d+\.\d+\.CVS_HEAD\-\d{10})/$(SHOWVERSION)-$$d/; print;}' > \
 	$(SOURCE)/loncom/license/about.html.new
 	mv -v $(SOURCE)/loncom/license/about.html.new \
 	$(SOURCE)/loncom/license/about.html
 	cat $(SOURCE)/loncom/loncapa_apache.conf | \
-	perl -e '$$d=`date +"%Y%m%d"`;chomp($$d);while(<>){s/\<\!\-\- VERSION \-\-\>/$(VERSION)-$$d/; print;}' > \
+	perl -e '$$d=`date +"%Y%m%d%H"`;chomp($$d);while(<>){s/(\<\!\-\- VERSION \-\-\>|\d+\.\d+\.CVS_HEAD\-\d{10})/$(SHOWVERSION)-$$d/; print;}' > \
 	$(SOURCE)/loncom/loncapa_apache.conf.new
 	mv -v $(SOURCE)/loncom/loncapa_apache.conf.new \
 	$(SOURCE)/loncom/loncapa_apache.conf
 
+postaboutVERSION:
+	if (test -e $(SOURCE)/loncom/license/about.html.orig) && \
+		(diff $(SOURCE)/loncom/license/about.html \
+		$(SOURCE)/loncom/license/about.html > /dev/null); then \
+		mv -v $(SOURCE)/loncom/license/about.html.orig \
+		$(SOURCE)/loncom/license/about.html; \
+	elif (test -e $(SOURCE)/loncom/license/about.html.orig) && \
+		!(diff $(SOURCE)/loncom/license/about.html \
+		$(SOURCE)/loncom/license/about.html > /dev/null); then \
+		rm -f $(SOURCE)/loncom/license/about.html.orig; \
+	fi
+	if (test -e $(SOURCE)/loncom/loncapa_apache.conf.orig) && \
+		(diff $(SOURCE)/loncom/license/about.html \
+		$(SOURCE)/loncom/license/about.html > /dev/null); then \
+		mv -v $(SOURCE)/loncom/loncapa_apache.conf.orig \
+		$(SOURCE)/loncom/loncapa_apache.conf; \
+	elif (test -e $(SOURCE)/loncom/loncapa_apache.conf.orig) && \
+		!(diff $(SOURCE)/loncom/license/about.html \
+		$(SOURCE)/loncom/license/about.html > /dev/null); then \
+		rm -f $(SOURCE)/loncom/loncapa_apache.conf.orig; \
+	fi
+
 # ========= *** Makefile.* TARGETS BUILT DYNAMICALLY FROM loncapafiles.lpml ***
 
 Makefile.configinstall: $(SOURCE)/doc/loncapafiles/loncapafiles.lpml \
@@ -595,6 +660,10 @@ MANIFEST_all:
 	echo 'loncom/development_hosts.tab' >> $(SOURCE)/MANIFEST
 	echo 'loncom/production_domain.tab' >> $(SOURCE)/MANIFEST
 	echo 'loncom/development_domain.tab' >> $(SOURCE)/MANIFEST
+	echo 'loncom/production_dns_hosts.tab' >> $(SOURCE)/MANIFEST
+	echo 'loncom/development_dns_hosts.tab' >> $(SOURCE)/MANIFEST
+	echo 'loncom/production_dns_domain.tab' >> $(SOURCE)/MANIFEST
+	echo 'loncom/development_dns_domain.tab' >> $(SOURCE)/MANIFEST
 	# ------------------ Files needed for dynamically generated directories
 	echo 'doc/man' >> $(SOURCE)/MANIFEST
 	echo 'doc/lib' >> $(SOURCE)/MANIFEST