--- loncom/build/Makefile	2008/01/02 13:21:57	1.185.2.3
+++ loncom/build/Makefile	2011/02/27 03:09:22	1.193
@@ -1,6 +1,6 @@
 # The LearningOnline Network with CAPA
 
-# $Id: Makefile,v 1.185.2.3 2008/01/02 13:21:57 raeburn Exp $
+# $Id: Makefile,v 1.193 2011/02/27 03:09:22 raeburn Exp $
 
 # TYPICAL USAGE of this Makefile is primarily for two targets:
 # "make build" and "make install".
@@ -22,7 +22,13 @@ SAVE=program.pl.$(TIMESTAMP)
 LAUNCHSAVE=$(OUTSTREAM) $(SAVE)
 METAMTARGET=""
 MTARGET=""
-VERSION=2.6.0
+VERSION=CVS_HEAD
+SHOWVERSION=$(VERSION)
+NEXTVERSION=2.11
+ifeq (CVS_HEAD,${VERSION})
+SHOWVERSION=$(NEXTVERSION).$(VERSION)
+endif
+#
 # The current working definition for "RELEASE" is: changes not in the software,
 # but in the operating system dependent packaging of the software.  Thus, the
 # generic tarball releases do not need to have a release number specified.
@@ -133,6 +139,12 @@ help_TARGETS:
 	@echo "chkconfig: test runlevels of httpd and loncontrol."
 	@echo "rpmcheck: test to see if rpms known to confict are installed."
 	@echo "wrap_setuid: put a C wrapper around setuid scripts."
+        @echo "latex_fixup: regenerate ls-R database for the latex base."
+	@echo "picins_check: check for picins.sty, retrieve and rebuild"
+	@echo "             filename databases used by LaTeX"
+	@echo "mimetex_version_check: check if mimetex.cgi version has changed,"
+	@echo "                      if so remove files from mimetexcache."
+	@echo "latex_fmtutil: run utility to maintain TeX format files system-wide."
 	@echo "updatequery: solicit the user for machine configuration"
 	@echo "             information; to be incorporated during an update"
 	@echo "             procedure (via the UPDATE command)"
@@ -249,8 +261,8 @@ TEST_hosts_tab:
 	else echo "**** ERROR **** hosts.tab not defined!" && \
 	     echo -n "You need to do one of the following within your " && \
 	     echo "CVS repository (cd loncapa/loncom)" && \
-	     echo "   1) ln -s production_hosts.tab hosts.tab" && \
-	     echo "   2) ln -s development_hosts.tab hosts.tab" && \
+	     echo "   1) ln -s production_dns_hosts.tab dns_hosts.tab" && \
+	     echo "   2) ln -s development_dns_hosts.tab dns_hosts.tab" && \
 	     echo "or 3) ln -s rawhide_hosts.tab hosts.tab" && \
 	     echo "(you most likely want option #1, production_hosts.tab)" && \
 	     exit 1; \
@@ -263,8 +275,8 @@ TEST_domain_tab:
 	else echo "**** ERROR **** domain.tab not defined!" && \
 	     echo -n "You need to do one of the following within your " && \
 	     echo "CVS repository (cd loncapa/loncom)" && \
-	     echo "   1) ln -s production_domain.tab domain.tab" && \
-	     echo "   2) ln -s development_domain.tab domain.tab" && \
+	     echo "   1) ln -s production_dns_domain.tab dns_domain.tab" && \
+	     echo "   2) ln -s development_dns_domain.tab dns_domain.tab" && \
 	     echo "or 3) ln -s rawhide_domain.tab domain.tab" && \
 	     echo "(you most likely want option #1, production_domain.tab)" && \
 	     exit 1; \
@@ -479,6 +491,31 @@ wrap_setuid:
 	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
 	tee -a WARNINGS
 
+latex_fixup:
+	cat $(SOURCE)/doc/loncapafiles/latex_fixup.piml | \
+        perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
+        tee -a WARNINGS
+
+picins_check:
+	cat $(SOURCE)/doc/loncapafiles/picins_check.piml | \
+	perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
+	tee -a WARNINGS
+
+mimetex_version_check:
+	cat $(SOURCE)/doc/loncapafiles/mimetex_version_check.piml | \
+	perl piml_parse.pl  $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
+	tee -a WARNINGS
+
+verify_domconfiguser:
+	cat $(SOURCE)/doc/loncapafiles/verify_domconfiguser.piml | \
+	perl piml_parse.pl  $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
+	tee -a WARNINGS
+
+latex_fmtutil:
+	cat $(SOURCE)/doc/loncapafiles/latex_fmtutil.piml | \
+	perl piml_parse.pl  $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
+	tee -a WARNINGS
+
 postinstall:
 	make webserverconf
 	make reseval_fixup
@@ -497,7 +534,11 @@ postinstall:
 	make sendmail_fix
 	make ownership_fix
 	make wrap_setuid
-
+	make latex_fixup
+	make picins_check
+	make mimetex_version_check
+	make verify_domconfiguser
+	make latex_fmtutil 
 VERSION:
 	install -d $(TARGET)/etc
 	echo -n "LON-CAPA release $(VERSION)-" > $(TARGET)/etc/loncapa-release
@@ -508,12 +549,12 @@ VERSION:
 
 aboutVERSION:
 	cat $(SOURCE)/loncom/license/about.html | \
-	perl -e '$$d=`date +"%Y%m%d%H"`;chomp($$d);while(<>){s/\<\!\-\- VERSION \-\-\>/$(VERSION)-$$d/; print;}' > \
+	perl -e '$$d=`date +"%Y%m%d%H"`;chomp($$d);while(<>){s/(\<\!\-\- VERSION \-\-\>|\d+\.\d+\.CVS_HEAD\-\d{10})/$(SHOWVERSION)-$$d/; print;}' > \
 	$(SOURCE)/loncom/license/about.html.new
 	mv -v $(SOURCE)/loncom/license/about.html.new \
 	$(SOURCE)/loncom/license/about.html
 	cat $(SOURCE)/loncom/loncapa_apache.conf | \
-	perl -e '$$d=`date +"%Y%m%d%H"`;chomp($$d);while(<>){s/\<\!\-\- VERSION \-\-\>/$(VERSION)-$$d/; print;}' > \
+	perl -e '$$d=`date +"%Y%m%d%H"`;chomp($$d);while(<>){s/(\<\!\-\- VERSION \-\-\>|\d+\.\d+\.CVS_HEAD\-\d{10})/$(SHOWVERSION)-$$d/; print;}' > \
 	$(SOURCE)/loncom/loncapa_apache.conf.new
 	mv -v $(SOURCE)/loncom/loncapa_apache.conf.new \
 	$(SOURCE)/loncom/loncapa_apache.conf