1: # The LearningOnline Network with CAPA
2:
3: # Scott Harrison, your friendly neighborhood volunteer
4: # $Id: Makefile,v 1.132 2002/08/14 18:31:43 harris41 Exp $
5:
6: # TYPICAL USAGE of this Makefile is primarily for two targets:
7: # "make build" and "make install".
8: # Many other targets and features are supported (see the initial
9: # help targets).
10:
11: # ======================================= Default settings for Makefile options
12: DISTPROBE=`perl ./distprobe`
13: DIST=$(DISTPROBE)
14: CATEGORY="development"
15: SOURCE=../..
16: TARGET=""
17: NORESTORECONF="0"
18: HOSTNAME=""
19: LAUNCH=| perl
20: QUERYLAUNCH=> /tmp/loncapa_query.pl; perl /tmp/loncapa_query.pl
21: OUTSTREAM=>
22: SAVE=program.pl.$(TIMESTAMP)
23: LAUNCHSAVE=$(OUTSTREAM) $(SAVE)
24: METAMTARGET=""
25: MTARGET=""
26: VERSION=0.4
27: DIRTARGET=loncapa-$(VERSION)
28:
29: # =============================================== Help targets for the Makefile
30: # If 'make' is run without any arguments, the 'help' target is called since
31: # it is the first target.
32: help:
33: @echo "*** You need to specify a valid target ***"
34: @echo "To get a list of valid targets: \"make help_TARGETS\""
35: @echo "To get a list of valid options: \"make help_OPTIONS\""
36: @echo " "
37: @echo "Typically invoked targets are:"
38: @echo " make build"
39: @echo " make install"
40: @echo " make test"
41: @echo " make clean"
42:
43: help_OPTIONS:
44: @echo "* ADJUSTABLE OPTIONS *"
45: @echo "(option) DIST can be redhat7, debian, redhat6.2, or default"
46: @echo " You probably do not need to specify this; it is"
47: @echo " automatically probed for."
48: @echo "(option) CATEGORY can be 'runtime' or 'development'; currently"
49: @echo " the 'development' setting is the most reliable;"
50: @echo " eventually, production machines should be using the"
51: @echo " 'runtime' settings"
52: @echo "(option) SOURCE is an absolute or relative directory path."
53: @echo " SOURCE corresponds to the root directory of the"
54: @echo " loncapa source release"
55: @echo "(option) TARGET is an absolute or relative directory path."
56: @echo " This is where files will be installed on your system."
57: @echo " Typically, this should be set to nothing (which"
58: @echo " corresponds to the '/' root of the entire filesystem)."
59: @echo "(option) NORESTORECONF, when set to a non-zero value, stops"
60: @echo " filesystem upgrades from overwriting existing "
61: @echo " configuration files. Ordinarily, NORESTORECONF=0, "
62: @echo " because the existing configuration files are safely"
63: @echo " dealt with (or so one hopes... :) )."
64: @echo "(option) HOSTNAME specifies the name of a remote server for"
65: @echo " which a NET_* Makefile target should be launched"
66: @echo "(option) VERSION; especially useful for the 'tardist' target"
67: @echo " this tags the tarball file and internal directories"
68: @echo " with a specific version string (conventionally "
69: @echo " numeric)"
70:
71: help_TARGETS:
72: @echo "*** RUNNING TESTS TO ENSURE SOLID PERFORMANCE ***"
73: @echo "test: test different parts of the LON-CAPA system (TEST_*)."
74: @echo " Makefile-dependent processes as well as horizontal and"
75: @echo " vertical aspects of the LON-CAPA system architecture"
76: @echo " are all tested."
77: @echo "TEST_lpml_scripts: make sure that the system can process"
78: @echo " the Linux Packaging Markup Language."
79: @echo " This is neither horizontal or vertical"
80: @echo " testing. The idea is to make sure that"
81: @echo " the installation software itself works"
82: @echo " as expected."
83: @echo "TEST_system_dependencies: make sure that all needed system "
84: @echo " components are active and present "
85: @echo " on the server such as perl modules"
86: @echo " and the MySQL database"
87: @echo " (horizontal testing)"
88: @echo "TEST_web_layer: mimic a login and various vertical actions on "
89: @echo " a LON-CAPA system"
90: @echo "TEST_hosts_tab: make sure that a loncapa/loncom/hosts.tab"
91: @echo " file is specified for installation"
92: @echo "TEST_html2ps: test for the presence of html2ps which is needed"
93: @echo " for making a PDF compilation for pdfdoc"
94: @echo "*** GENERAL TARGETS SUCH AS 'build' AND 'install' ***"
95: @echo "build: compile the source tree"
96: @echo "buildflag: a semaphore that helps educate the user to run"
97: @echo " 'make build' first before running 'make install'"
98: @echo "configinstall: install configuration files and restore with"
99: @echo " prior information"
100: @echo "install: install from a ***compiled*** source tree
101: @echo " (see make build) to a specified TARGET destination"
102: @echo " on the filesystem (default setting is TARGET=/)."
103: @echo "rawinstall: just install files, links and directories without"
104: @echo " any bells or whistles (e.g. double-checking"
105: @echo " configurations, fine-tuning webserver, etc.)"
106: @echo "hosts_tab: install the hosts.tab to the filesystem"
107: @echo "webserverconf: fine-tune the web server configuration;"
108: @echo " make sure the proper 'Include' statements"
109: @echo " are appended to httpd.conf"
110: @echo "vanillatar: generate top-level files such as README, UPDATE,"
111: @echo " CHECKRPMS, and TEST (needed by tardist)"
112: @echo "tardist: build a tarball that will upgrade the software on a "
113: @echo " system"
114: @echo "sanitycheck: probe for common errors and recommend fixes to"
115: @echo " the user"
116: @echo "updatequery: solicit the user for machine configuration"
117: @echo " information; to be incorporated during an update"
118: @echo " procedure (via the UPDATE command)"
119: @echo "postinstall: double-check things after installation"
120: @echo "VERSION: tag the filesystem with version information inside"
121: @echo " /etc/loncapa-release"
122: @echo "aboutVERSION: place version information inside about.html"
123: @echo "*** Makefile.* TARGETS BUILT DYNAMICALLY FROM loncapafiles.lpml ***"
124: @echo "Makefile.configinstall: generate a Makefile for configuration"
125: @echo " files; built dynamically from"
126: @echo " loncapafiles.lpml"
127: @echo "Makefile.build: generate a Makefile for compiling"
128: @echo " files inside the source directory; "
129: @echo " Makefile.build is generated from"
130: @echo " loncapafiles.lpml"
131: @echo "Makefile.install: generate a Makefile for installing"
132: @echo " files; built dynamically from"
133: @echo " loncapafiles.lpml"
134: @echo "*** TARGETS FOR OPERATING ON FILESYSTEMS ACROSS THE NETWORK ***"
135: @echo "lpmladm: coordinates username=lpmladm mediated secure shell"
136: @echo " processes; needed for the NET_* targets"
137: @echo "NET_hosts_tab: install the hosts.tab to a filesystem elsewhere"
138: @echo " on the network"
139: @echo "NET_webserverconf: fine-tune the web server configuration on a"
140: @echo " filesystem elsewhere on the network"
141: @echo "NET_rawinstall: launch the rawinstall target on a filesystem"
142: @echo " elsewhere on the network"
143: @echo "*** TARGETS FOR MAKING LISTS (MANIFESTS) OF LON-CAPA FILES ***"
144: @echo "MANIFEST_all: generate a list of all files to be included in"
145: @echo " the distributed tarball"
146: @echo "MANIFEST_cvs: essentially a list of all CVS/Entries files used"
147: @echo " for 'time-checking' intelligence"
148: @echo "MANIFEST_lpml: a list of all LON-CAPA files to be installed,
149: @echo " compile from, used as building software, and"
150: @echo " testing"
151: @echo "MANIFEST_vanillatar: 'README'-type top-level files that a user"
152: @echo " of the distributed tarball would first"
153: @echo " look at and work with"
154: @echo "*** STATUS REPORT TARGETS ***"
155: @echo "warningnote: analyze the WARNINGS file and produce a synopsis"
156: @echo " and recommended action to the user"
157: @echo "HTML: generate an HTML-formatted description of the LON-CAPA"
158: @echo " source files"
159: @echo "status: compare the TARGET filesystem with a compiled loncapa "
160: @echo " source directory"
161: @echo "statuspost: post the results of "make status" to "
162: @echo " TARGET/home/httpd/html/lon-status/filestatus.html"
163: @echo "rpmstatus: compare the rpms on a system to defined lists "
164: @echo " loncapa/doc/otherfiles/cd_rpms and "
165: @echo " loncapa/doc/otherfiles/rpm_list.txt"
166: @echo "rpmstatuspost: post the results of 'make rpmstatus' to "
167: @echo " TARGET/home/httpd/html/lon-status/rpmstatus.html"
168: @echo "*** ALTERNATIVE PACKAGING TARGETS ***"
169: @echo "RPM: build LON-CAPA-base RPM from loncapa source repository"
170: @echo " (still under development)"
171: @echo "DPKG: build a loncapa Debian package from loncapa source"
172: @echo " repository (still under development)"
173: @echo "base_rpm_file_list: create a file listing to be used for"
174: @echo " generating an RPM software package"
175: @echo "BinaryRoot: create a BinaryRoot directory to be used for"
176: @echo " generating an RPM software package"
177: @echo "*** MASTER DOCUMENTATION TARGETS ***"
178: @echo "doc: generate web-page documentation for install.lon-capa.org"
179: @echo " (and eventually for documentation on installed machines)"
180: @echo "pdfdoc: make a PDF-formatted compilation of all installation"
181: @echo " documentation"
182: @echo "*** KEEPING THINGS CLEAN ***"
183: @echo "clean: remove any files that might (even by remote chance)"
184: @echo " interfere with rebuilding/recompiling software"
185: @echo "reallyclean: remove all files that were generated during"
186: @echo " building or compilation of the software"
187: @echo "*** A HELPFUL DEPENDENCY ***"
188: @echo "alwaysrun: blank target that is a dependency for targets"
189: @echo " that should \"always run\""
190:
191: # =========================== *** RUNNING TESTS TO ENSURE SOLID PERFORMANCE ***
192:
193: test: TEST_lpml_scripts TEST_system_dependencies TEST_web_layer
194: @echo "ALL SYSTEM DEPENDENCY TESTS SUCCESSFUL"
195:
196: TEST_system_dependencies:
197: @echo "TESTING SYSTEM DEPENDENCIES"
198: cd system_dependencies; make
199:
200: TEST_lpml_scripts:
201: @echo "TESTING LPML INSTALLATION CODE"
202: cd ../test; perl filecomparetest.pl
203:
204: TEST_web_layer:
205: @echo "TESTING WEB LAYER"
206: cd weblayer_test; make
207:
208: TEST_hosts_tab:
209: @echo "Testing hosts.tab"
210: @if (test -e ../hosts.tab); then \
211: echo "there is a defined link or file; assume okay"; \
212: else echo "**** ERROR **** hosts.tab not defined!" && \
213: echo -n "You need to do one of the following within your " && \
214: echo "CVS repository (cd loncapa/loncom)" && \
215: echo " 1) ln -s production_hosts.tab hosts.tab" && \
216: echo " 2) ln -s development_hosts.tab hosts.tab" && \
217: echo "or 3) ln -s rawhide_hosts.tab hosts.tab" && \
218: echo "(you most likely want option #1, production_hosts.tab)" && \
219: exit 1; \
220: fi
221:
222: TEST_html2ps:
223: @if (test -e /usr/local/html2ps/bin/html2ps); then \
224: echo "I can find html2ps; assume okay"; \
225: else \
226: echo "**** ERROR **** cannot find /usr/local/html2ps/bin/html2ps!" && \
227: echo "Please visit http://www.tdb.uu.se/~jan/html2ps.html" && \
228: exit 1; \
229: fi
230:
231: # ======================= *** GENERAL TARGETS SUCH AS 'build' AND 'install' ***
232:
233: build: Makefile.build pod2html.sh pod2man.sh
234: install -d $(SOURCE)/doc/man
235: install -d $(SOURCE)/doc/scripts
236: install -d $(SOURCE)/doc/lib/perl/Apache
237: echo -n "" > WARNINGS
238: make -f Makefile.build all
239: echo '1' > buildflag
240: make warningnote
241:
242: buildflag:
243: @echo "**** ERROR **** You need to run 'make build' first" > WARNINGS
244: make warningnote
245: @need_to_run_make_build_first 2>/dev/null
246:
247: configinstall: Makefile.configinstall
248: make -f Makefile.configinstall SOURCE="$(SOURCE)" TARGET="$(TARGET)" \
249: configfiles
250: if (test "0" = $(NORESTORECONF)); then \
251: perl loncaparestoreconfigurations suffix .lpmlnew; fi
252:
253: install: buildflag VERSION TEST_hosts_tab Makefile.install Makefile
254: echo -n "" > WARNINGS
255: make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" \
256: directories
257: make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" files
258: make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" links
259: make SOURCE="$(SOURCE)" TARGET="$(TARGET)" \
260: NORESTORECONF="$(NORESTORECONF)" configinstall
261: make postinstall
262: make warningnote
263: echo "You can run 'make test' to see if your system is ready to go!"
264: echo "NOTE THAT YOUR SYSTEM MUST HAVE MYSQL WITH A USER=\"www\" AND"
265: echo -n "PASSWORD=\"localhostkey\" FOR www\@localhost"
266: echo -n "(YOU MAY NEED TO REINITIALIZE YOUR MYSQL www\@localhost USER)"
267: echo -n "Please see http://install.lon-capa.org/ for more information"
268:
269: rawinstall: VERSION Makefile.install Makefile
270: echo -n "" > WARNINGS
271: make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" \
272: directories
273: make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" files
274: make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" links
275: make SOURCE="$(SOURCE)" TARGET="$(TARGET)" \
276: NORESTORECONF="$(NORESTORECONF)" configinstall
277:
278: hosts_tab: TEST_hosts_tab
279: cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
280: perl xfml_parse.pl $(SOURCE)/doc/loncapafiles/valid_hosts.xfml | \
281: perl lpml_parse.pl install $(CATEGORY) $(DIST) "$(SOURCE)" \
282: "$(TARGET)" > Makefile.install
283: make -f Makefile.install directories
284: make -f Makefile.install files
285: @echo "If hosts.tab has changed, restart httpd and loncontrol:"
286: @echo " /etc/rc.d/init.d/httpd restart"
287: @echo " /etc/rc.d/init.d/loncontrol restart"
288:
289: webserverconf:
290: cat $(SOURCE)/doc/loncapafiles/webserver.piml | \
291: perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH)
292:
293: # ---------------- Top-level files such as README, UPDATE, CHECKRPMS, and TEST
294: vanillatar:
295: # --------------------------- Point UPDATE to the internal make process
296: echo '#!/bin/sh' > $(SOURCE)/UPDATE
297: echo 'touch loncom/build/WARNINGS' >> $(SOURCE)/UPDATE;
298: echo 'ln -s loncom/build/WARNINGS WARNINGS' >> $(SOURCE)/UPDATE;
299: echo 'cd loncom/build; make build' >> $(SOURCE)/UPDATE
300: echo 'make rawinstall' >> $(SOURCE)/UPDATE
301: echo 'make configinstall' >> $(SOURCE)/UPDATE
302: echo 'make updatequery' >> $(SOURCE)/UPDATE
303: echo 'make hosts_tab' >> $(SOURCE)/UPDATE
304: echo 'make postinstall' >> $(SOURCE)/UPDATE
305: echo 'make aboutVERSION' >> $(SOURCE)/UPDATE
306: echo 'make warningnote' >> $(SOURCE)/UPDATE
307: # ----------------------------- Point TEST to the internal make process
308: echo '#!/bin/sh' > $(SOURCE)/TEST
309: echo 'cd loncom/build; make test' >> $(SOURCE)/TEST
310: echo 'cd system_dependencies || cd loncom/build/system_dependencies; cp -v CPAN_STATUS_REPORT ../../../CPAN_STATUS_REPORT' >> $(SOURCE)/TEST
311: # ----------------------------- Copy CHECKRPMS to the vanilla top-level
312: cp -v $(SOURCE)/loncom/build/CHECKRPMS $(SOURCE)/CHECKRPMS
313: # ----------------------- vanilla executables must indeed be executable
314: chmod a+rx $(SOURCE)/UPDATE
315: chmod a+rx $(SOURCE)/TEST
316: chmod a+rx $(SOURCE)/CHECKRPMS
317: # -------------------------------- Copy README to the vanilla top-level
318: cp -v $(SOURCE)/doc/shortest_path_redhat7.2.txt $(SOURCE)/README
319:
320: tardist:
321: make MANIFEST_all
322: make vanillatar
323: # -------------------------------------------------------- Make tardist
324: @cd $(SOURCE); \
325: if (test -h $(DIRTARGET)); then \
326: echo "$(DIRTARGET) link already defined; assume okay"; \
327: else \
328: ln -s . $(DIRTARGET); \
329: fi
330: cp -v $(SOURCE)/loncom/license/about.html \
331: $(SOURCE)/loncom/license/about.html.orig
332: make aboutVERSION
333: cd $(SOURCE); \
334: tar --no-recursion --numeric-owner --files-from MANIFEST \
335: -h -czf $(DIRTARGET).tar.gz 2>tar_WARNINGS || [ "0" == "0" ]
336: mv -v $(SOURCE)/loncom/license/about.html.orig \
337: $(SOURCE)/loncom/license/about.html
338: cat $(SOURCE)/tar_WARNINGS | \
339: xargs --replace=XXX echo '**** WARNING **** XXX' > WARNINGS
340: rm -f $(SOURCE)/tar_WARNINGS
341: make warningnote
342:
343: sanitycheck:
344: cat $(SOURCE)/doc/loncapafiles/sanitycheck.piml | \
345: perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
346: tee -a WARNINGS
347:
348: updatequery:
349: cat $(SOURCE)/doc/loncapafiles/updatequery.piml | \
350: perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(QUERYLAUNCH)
351:
352: reseval_fixup:
353: cat $(SOURCE)/doc/loncapafiles/reseval_fixup.piml | \
354: perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
355: tee -a WARNINGS
356:
357: postinstall:
358: make webserverconf
359: make reseval_fixup
360: make sanitycheck
361:
362: VERSION:
363: install -d $(TARGET)/etc
364: echo -n "LON-CAPA release $(VERSION)-" > $(TARGET)/etc/loncapa-release
365: date +"%Y%m%d" >> $(TARGET)/etc/loncapa-release
366:
367: aboutVERSION:
368: cat $(SOURCE)/loncom/license/about.html | \
369: perl -e '$$d=`date +"%Y%m%d"`;chomp($$d);while(<>){s/\<\!\-\- VERSION \-\-\>/$(VERSION)-$$d/; print;}' > \
370: $(SOURCE)/loncom/license/about.html.new
371: mv -v $(SOURCE)/loncom/license/about.html.new \
372: $(SOURCE)/loncom/license/about.html
373:
374: # ========= *** Makefile.* TARGETS BUILT DYNAMICALLY FROM loncapafiles.lpml ***
375:
376: Makefile.configinstall: $(SOURCE)/doc/loncapafiles/loncapafiles.lpml \
377: lpml_parse.pl
378: cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
379: perl lpml_parse.pl configinstall $(CATEGORY) $(DIST) "$(SOURCE)" \
380: "$(TARGET)" > Makefile.configinstall
381:
382: Makefile.build: $(SOURCE)/doc/loncapafiles/loncapafiles.lpml lpml_parse.pl
383: cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
384: perl lpml_parse.pl build $(CATEGORY) $(DIST) "$(SOURCE)" "$(TARGET)" \
385: > Makefile.build
386:
387: Makefile.install: alwaysrun
388: cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
389: perl lpml_parse.pl install $(CATEGORY) $(DIST) "$(SOURCE)" \
390: "$(TARGET)" > Makefile.install
391:
392: # ============= *** TARGETS FOR OPERATING ON FILESYSTEMS ACROSS THE NETWORK ***
393:
394: lpmladm:
395: @if (test $(METAMTARGET) = "TRANSPORT"); then \
396: echo "Transporting to $(HOSTNAME)"; \
397: sudo make DIST=$(DIST) CATEGORY=$(CATEGORY) \
398: SOURCE="$(SOURCE)" \
399: TARGET="lpmladm.$(TIMESTAMP)" \
400: NORESTORECONF="$(NORESTORECONF)" "$(MTARGET)"; \
401: cd lpmladm.$(TIMESTAMP); \
402: sudo tar czvf ../tarball$(TIMESTAMP).tar.gz .; \
403: cd ..; scp tarball$(TIMESTAMP).tar.gz \
404: lpmladm@$(HOSTNAME):~/tarball$(TIMESTAMP).tar.gz; \
405: ssh lpmladm@$(HOSTNAME) sudo mv tarball$(TIMESTAMP).tar.gz /; \
406: ssh lpmladm@$(HOSTNAME) sudo tar -x -z -v -C / \
407: -p --same-owner -f \
408: /tarball$(TIMESTAMP).tar.gz; \
409: ssh lpmladm@$(HOSTNAME) sudo rm -f \
410: /tarball$(TIMESTAMP).tar.gz; \
411: elif (test $(METAMTARGET) = "LAUNCH"); then \
412: echo "Launching process on $(HOSTNAME)"; \
413: LAUNCHSAVE=$(OUTSTREAM) $(SAVE); \
414: make DIST=$(DIST) CATEGORY=$(CATEGORY) SOURCE="$(SOURCE)" \
415: TARGET="$(TARGET)" NORESTORECONF="$(NORESTORECONF)" \
416: LAUNCH="$(LAUNCHSAVE)" "$(MTARGET)"; \
417: scp $(SAVE) lpmladm@$(HOSTNAME):~/$(SAVE); \
418: ssh lpmladm@$(HOSTNAME) sudo perl $(SAVE); \
419: ssh lpmladm@$(HOSTNAME) sudo rm -f $(SAVE); \
420: else \
421: echo "**** ERROR **** Incorrect METAMTARGET"; \
422: fi
423:
424: NET_hosts_tab:
425: make TIMESTAMP=`date +"%s"` METAMTARGET="TRANSPORT" \
426: MTARGET="hosts_tab" HOSTNAME="$(HOSTNAME)" lpmladm
427:
428: NET_webserverconf:
429: make TIMESTAMP=`date +"%s"` METAMTARGET="LAUNCH" \
430: MTARGET="webserverconf" HOSTNAME="$(HOSTNAME)" lpmladm
431:
432: NET_rawinstall:
433: make TIMESTAMP=`date +"%s"` METAMTARGET="TRANSPORT" \
434: MTARGET="rawinstall" HOSTNAME="$(HOSTNAME)" lpmladm
435:
436: # ============== *** TARGETS FOR MAKING LISTS (MANIFESTS) OF LON-CAPA FILES ***
437:
438: MANIFEST_all:
439: # --------------------------------------------------------- start clean
440: rm -f $(SOURCE)/MANIFEST
441: make MANIFEST_lpml
442: make MANIFEST_vanillatar
443: make MANIFEST_cvs
444: # ---------------------------------- might as well include the MANIFEST
445: echo 'MANIFEST' >> $(SOURCE)/MANIFEST
446: # ------------------------------------------ hosts.tab are belong to us
447: echo 'loncom/rawhide_hosts.tab' >> $(SOURCE)/MANIFEST
448: echo 'loncom/production_hosts.tab' >> $(SOURCE)/MANIFEST
449: echo 'loncom/development_hosts.tab' >> $(SOURCE)/MANIFEST
450: # ------------------ Files needed for dynamically generated directories
451: echo 'doc/man' >> $(SOURCE)/MANIFEST
452: echo 'doc/lib' >> $(SOURCE)/MANIFEST
453: echo 'doc/lib/perl' >> $(SOURCE)/MANIFEST
454: echo 'doc/lib/perl/Apache' >> $(SOURCE)/MANIFEST
455: echo 'doc/scripts' >> $(SOURCE)/MANIFEST
456: # --------------------------------------------------- Clean up MANIFEST
457: cd $(SOURCE); \
458: sort MANIFEST | perl -nle 'print "$(DIRTARGET)/$$_"' | \
459: perl -nle 's/\w+\/\.\.\///g;s/\w+\/\.\.\///g;print' | \
460: perl -nle 's/\w+\/\.\.\///g;s/\w+\/\.\.\///g;print' | \
461: perl -nle 's/\w+\/\.\.\///g;s/\w+\/\.\.\///g;print' | \
462: perl -nle 's/\/\.\//\//g;print' | sort | uniq > \
463: MANIFEST_loncapa
464: cd $(SOURCE); mv -v MANIFEST_loncapa MANIFEST
465:
466: # --------------- MANIFEST files with important CVS versioning/date information
467: MANIFEST_cvs:
468: # ------ CVS/Entries directories to retain 'time-checking' intelligence
469: cd $(SOURCE); find . -type f -name 'Entries' | grep 'CVS/Entries' >> \
470: MANIFEST
471:
472: # ------------------- MANIFEST the building, testing and standard loncapa files
473: MANIFEST_lpml:
474: cat $(SOURCE)/doc/loncapafiles/buildfiles.lpml | \
475: perl lpml_parse.pl MANIFEST development default \
476: '$(SOURCE)' '$(TARGET)' | grep '[[:alnum:]]' >> $(SOURCE)/MANIFEST
477: cat $(SOURCE)/doc/loncapafiles/testfiles.lpml | \
478: perl lpml_parse.pl MANIFEST development default \
479: '$(SOURCE)' '$(TARGET)' | grep '[[:alnum:]]' >> $(SOURCE)/MANIFEST
480: cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
481: perl lpml_parse.pl MANIFEST development default \
482: '$(SOURCE)' '$(TARGET)' | grep '[[:alnum:]]' >> $(SOURCE)/MANIFEST
483:
484: # ------------ Files for top-level (the vanilla layer that the user first sees)
485: MANIFEST_vanillatar:
486: echo 'README' >> $(SOURCE)/MANIFEST
487: echo 'UPDATE' >> $(SOURCE)/MANIFEST
488: echo 'TEST' >> $(SOURCE)/MANIFEST
489: echo 'CHECKRPMS' >> $(SOURCE)/MANIFEST
490:
491: # =============================================== *** STATUS REPORT TARGETS ***
492:
493: warningnote:
494: @if (test -s WARNINGS); then \
495: W=`grep -c '\*\*\*\* WARNING' WARNINGS`; \
496: E=`grep -c '\*\*\*\* ERROR' WARNINGS`; \
497: N=`grep -c '\*\*\*\* NOTE' WARNINGS`; \
498: echo "---> $$W WARNINGS ENCOUNTERED! "; \
499: echo "---> $$E ERRORS ENCOUNTERED! "; \
500: echo "---> $$N NOTES ENCOUNTERED! "; \
501: echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"; \
502: echo "!!!! Please read the WARNINGS file !!!!"; \
503: echo "!!!! to make sure everything is !!!!"; \
504: echo "!!!! correct and taken care of !!!!"; \
505: echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"; \
506: fi
507:
508: HTML:
509: install -d HTML
510: cp $(SOURCE)/doc/loncapafiles/*.gif HTML
511: cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
512: perl lpml_parse.pl html development default "$(SOURCE)" '$(TARGET)' \
513: > HTML/index.html
514:
515: status:
516: install -d HTML
517: cp $(SOURCE)/doc/loncapafiles/*.gif HTML
518: cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
519: perl lpml_parse.pl html $(CATEGORY) $(DIST) "$(SOURCE)" "($TARGET)" | \
520: perl lpml_html_posteval.pl > \
521: HTML/filestatus.html
522:
523: statuspost: status
524: cp $(SOURCE)/doc/loncapafiles/*.gif \
525: $(TARGET)/home/httpd/html/lon-status
526: cp HTML/filestatus.html \
527: $(TARGET)/home/httpd/html/lon-status/filestatus.html
528:
529: rpmstatus:
530: install -d RPMSTATUS
531: rpm -qa --queryformat \
532: '%{NAME}\t%{VERSION}\t%{RELEASE}\t%{BUILDTIME}\n' | sort > \
533: RPMSTATUS/current.tmp
534: cat $(SOURCE)/doc/otherfiles/cd_rpms.txt > RPMSTATUS/standard.tmp
535: cat $(SOURCE)/doc/otherfiles/rpm_list.txt > RPMSTATUS/expected.tmp
536: perl rpmparse.pl RPMSTATUS/standard.tmp RPMSTATUS/current.tmp \
537: RPMSTATUS/expected.tmp > RPMSTATUS/rpmstatus.html
538:
539: rpmstatuspost: rpmstatus
540: cp RPMSTATUS/rpmstatus.html /home/httpd/html/lon-status/rpmstatus.html
541:
542: # ======================================= *** ALTERNATIVE PACKAGING TARGETS ***
543:
544: RPM: BinaryRoot base_rpm_file_list
545: cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
546: perl lpml_parse.pl make_rpm $(CATEGORY) $(DIST) $(SOURCE) $(TARGET) \
547: > base_customizerpm.xml
548: cat base_rpm_file_list.txt | perl make_rpm.pl base 3.2 '' '' \
549: BinaryRoot base_customizerpm.xml
550:
551: DPKG:
552: make TARGET='lon-capa-$(VERSION)' NORESTORECONF='1' install
553: @echo "You will next need to follow instructions at:"
554: @echo "http://people.debian.org/~jaldhar/make_package1.html"
555: @echo "A directory with a snapshot of the debian package files"
556: @echo "is LON-CAPA-base."
557: # What DPKG steps need to happen (for future implementation):
558: # export EMAIL="" ... probably sharrison@mail.lon-capa.org
559: # deb-make
560: # edit debian/control
561: # make debian/dirs file
562: # make debian/copyright file
563: # debian/README.debian... point them to LON-CAPA URLS
564: # debian/changelog
565: # debian/conffiles
566: # debuild
567: # and maybe do some GPG-related steps around here
568:
569: base_rpm_file_list:
570: cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
571: perl lpml_parse.pl rpm_file_list $(CATEGORY) $(DIST) $(SOURCE) \
572: 'BinaryRoot' | sort > base_rpm_file_list.txt
573:
574: BinaryRoot: base_rpm_file_list
575: make TARGET='BinaryRoot' NORESTORECONF='1' install
576:
577: # ======================================== *** MASTER DOCUMENTATION TARGETS ***
578:
579: # Generates CVS:loncom/build/docs; root location of install.lon-capa.org
580: doc:
581: install -d docs
582: @if (test -e installation_manual.pdf); then \
583: cp -vf installation_manual.pdf docs/.; \
584: else \
585: touch docs/installation_manual.pdf; \
586: fi
587: install -m 0755 -d docs/icons
588: install -m 0644 $(SOURCE)/doc/icons/[^C][^V]* docs/icons
589: install -m 0755 -d docs/reconfig
590: cd docs; ln -fs installation_manual.pdf index.pdf
591: cd docs/reconfig; ln -fs ../installation_manual.pdf index.pdf
592: perl doc_template.pl $(SOURCE)/doc/templates/template.html \
593: $(SOURCE)/doc/build/reconfig.html > docs/reconfig/index.html
594: install -m 0755 -d docs/reconfig/confexamples
595: install -m 0644 $(SOURCE)/doc/build/confexamples/[^C][^V]* \
596: docs/reconfig/confexamples
597: perl doc_template.pl $(SOURCE)/doc/templates/template.html \
598: $(SOURCE)/doc/build/installindex.html > docs/index.html
599: install -m 0755 -d docs/license
600: cd docs/license; ln -fs ../installation_manual.pdf index.pdf
601: perl doc_template.pl $(SOURCE)/doc/templates/template.html \
602: $(SOURCE)/doc/build/license.html > docs/license/index.html
603: install -m 0755 -d docs/contact
604: cd docs/contact; ln -fs ../installation_manual.pdf index.pdf
605: perl doc_template.pl $(SOURCE)/doc/templates/template.html \
606: $(SOURCE)/doc/build/contact.html > docs/contact/index.html
607: install -m 0755 -d docs/faq
608: cd docs/faq; ln -fs ../installation_manual.pdf index.pdf
609: perl doc_template.pl $(SOURCE)/doc/templates/template.html \
610: $(SOURCE)/doc/build/faq.html > docs/faq/index.html
611: install -m 0755 -d docs/downloads
612: cd docs/downloads; ln -fs ../installation_manual.pdf download.pdf
613: perl doc_template.pl $(SOURCE)/doc/templates/template.html \
614: $(SOURCE)/doc/build/download.html > docs/downloads/index.html
615: install -m 0755 -d docs/install
616: cd docs/install; ln -fs ../installation_manual.pdf install.pdf
617: perl doc_template.pl $(SOURCE)/doc/templates/template.html \
618: $(SOURCE)/doc/build/install.html > docs/install/index.html
619: cp -v $(SOURCE)/doc/install/redhat7.3/new_install_rh73.html \
620: docs/install/rh73.html
621: cp -v $(SOURCE)/doc/install/redhat7.3/new_install_rh73.html \
622: docs/downloads/rh73.html
623: install -m 0755 -d docs/upgrade
624: cd docs/upgrade; ln -fs ../installation_manual.pdf upgrade.pdf
625: perl doc_template.pl $(SOURCE)/doc/templates/template.html \
626: $(SOURCE)/doc/build/upgrade.html > docs/upgrade/index.html
627: cd docs; tar czvpf ../docs.tar.gz .
628:
629: pdfdoc: TEST_html2ps
630: install -d pdfdoc
631: /usr/local/html2ps/bin/html2ps -D \
632: $(SOURCE)/doc/build/installindex_noform.html > pdfdoc/installindex.ps
633: /usr/local/html2ps/bin/html2ps -D \
634: $(SOURCE)/doc/build/reconfig.html | \
635: perl -nle 's/\[EXAMPLE\]/\[EXAMPLE \(at end of document\)\]/g;print' \
636: > pdfdoc/reconfig.ps
637: /usr/local/html2ps/bin/html2ps -D \
638: $(SOURCE)/doc/build/install.html > pdfdoc/install.ps
639: /usr/local/html2ps/bin/html2ps -D \
640: $(SOURCE)/doc/build/upgrade.html > pdfdoc/upgrade.ps
641: /usr/local/html2ps/bin/html2ps -D \
642: $(SOURCE)/doc/build/faq.html > pdfdoc/faq.ps
643: /usr/local/html2ps/bin/html2ps -D \
644: $(SOURCE)/doc/build/download.html > pdfdoc/download.ps
645: /usr/local/html2ps/bin/html2ps -D \
646: $(SOURCE)/doc/build/contact.html > pdfdoc/contact.ps
647: /usr/local/html2ps/bin/html2ps -D \
648: $(SOURCE)/doc/build/license.html > pdfdoc/license.ps
649: # This creates a bad confexamples.ps... so take the long way around
650: # cd $(SOURCE)/doc/build/confexamples; \
651: # mpage -P- -1 -H [^C]* > ../../../loncom/build/pdfdoc/confexamples.ps
652: install -d pdfdoc/confexamples
653: cd $(SOURCE)/doc/build/confexamples; \
654: find . -type f | cut -b3- | grep -v '^C' | grep -v 'keyword' | \
655: perl -nle \
656: '`mpage -P- -1 -H $$_ > ../../../loncom/build/pdfdoc/confexamples/$$_.ps`;'
657: echo '' > pdfdoc/contents.txt
658: echo '' >> pdfdoc/contents.txt
659: echo ' The Learning Online Network' >> pdfdoc/contents.txt
660: echo ' with the' >> pdfdoc/contents.txt
661: echo ' Computer-Assisted Personalized Approach' >> \
662: pdfdoc/contents.txt
663: echo '' >> pdfdoc/contents.txt
664: echo '' >> pdfdoc/contents.txt
665: echo 'CONTENTS' >> pdfdoc/contents.txt
666: echo '--------' >> pdfdoc/contents.txt
667: echo 'Opening' >> pdfdoc/contents.txt
668: echo 'Configuration' >> pdfdoc/contents.txt
669: echo 'Installation' >> pdfdoc/contents.txt
670: echo 'Upgrading a LON-CAPA Server' >> pdfdoc/contents.txt
671: echo 'FAQ' >> pdfdoc/contents.txt
672: echo 'Download' >> pdfdoc/contents.txt
673: echo 'Contact Information' >> pdfdoc/contents.txt
674: echo 'License Information' >> pdfdoc/contents.txt
675: echo 'Configuration Examples' >> pdfdoc/contents.txt
676: mpage -P- -1 \
677: pdfdoc/contents.txt \
678: pdfdoc/installindex.ps \
679: pdfdoc/reconfig.ps \
680: pdfdoc/install.ps \
681: pdfdoc/upgrade.ps \
682: pdfdoc/faq.ps \
683: pdfdoc/download.ps \
684: pdfdoc/contact.ps \
685: pdfdoc/license.ps \
686: pdfdoc/confexamples/*.ps \
687: > pdfdoc/installation_manual.ps
688: ps2pdf pdfdoc/installation_manual.ps pdfdoc/installation_manual.pdf
689: mv -vf pdfdoc/installation_manual.pdf .
690:
691: # ================================================ *** KEEPING THINGS CLEAN ***
692:
693: clean:
694: rm -f buildflag
695: rm -Rf HTML
696: rm -f installation_manual.pdf
697: rm -f Makefile.build
698: rm -f Makefile.install
699: rm -f Makefile.configinstall
700: rm -Rf BinaryRoot
701: rm -Rf SetupBinaryRoot
702: rm -Rf LON-CAPA-base
703: rm -f base_rpm_file_list.txt
704: rm -f base_customizerpm.xml
705: rm -f setup_rpm_file_list.txt
706: rm -f docs.tar.gz
707: rm -Rf docs
708: rm -Rf pdfdoc
709: rm -f program.pl*
710: rm -Rf lpmladm.*
711: rm -f WARNINGS
712: rm -f CPAN_STATUS_REPORT
713: rm -f $(SOURCE)/loncom/build/hosts.tab
714:
715: reallyclean:
716: rm -f buildflag
717: rm -f $(SOURCE)/README
718: rm -f $(SOURCE)/UPDATE
719: rm -f $(SOURCE)/TEST
720: rm -f $(SOURCE)/MANIFEST
721: rm -f $(SOURCE)/MANIFEST_loncapa
722: rm -f $(SOURCE)/loncapa
723: rm -f $(SOURCE)/loncom/build/hosts.tab
724: rm -f $(SOURCE)/loncapa.tar.gz
725: rm -Rf HTML
726: rm -f installation_manual.pdf
727: rm -f Makefile.build
728: rm -f Makefile.install
729: rm -f Makefile.configinstall
730: rm -Rf BinaryRoot
731: rm -Rf SetupBinaryRoot
732: rm -Rf LON-CAPA-base
733: rm -f base_rpm_file_list.txt
734: rm -f base_customizerpm.xml
735: rm -f setup_rpm_file_list.txt
736: rm -f docs.tar.gz
737: rm -Rf docs
738: rm -Rf pdfdoc
739: rm -f program.pl*
740: rm -Rf lpmladm.*
741: make -f Makefile.cvs clean
742: rm -f WARNINGS
743:
744: # ================================================ *** A HELPFUL DEPENDENCY ***
745: alwaysrun:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/back.gif){kind=icon}
Return to Makefile CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [LON-CAPA] / loncom / build