Annotation of loncom/enrollment/localenroll.pm, revision 1.51
1.5 albertel 1: # functions to glue school database system into Lon-CAPA for
2: # automated enrollment
1.51 ! raeburn 3: # $Id: localenroll.pm,v 1.50 2014/06/26 15:53:29 raeburn Exp $
1.5 albertel 4: #
5: # Copyright Michigan State University Board of Trustees
6: #
7: # This file is part of the LearningOnline Network with CAPA (LON-CAPA).
8: #
9: # LON-CAPA is free software; you can redistribute it and/or modify
10: # it under the terms of the GNU General Public License as published by
11: # the Free Software Foundation; either version 2 of the License, or
12: # (at your option) any later version.
13: #
14: # LON-CAPA is distributed in the hope that it will be useful,
15: # but WITHOUT ANY WARRANTY; without even the implied warranty of
16: # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17: # GNU General Public License for more details.
18: #
19: # You should have received a copy of the GNU General Public License
20: # along with LON-CAPA; if not, write to the Free Software
21: # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22: #
23: # /home/httpd/html/adm/gpl.txt
24: #
25: # http://www.lon-capa.org/
26: #
1.32 jms 27:
28: =pod
29:
30: =head1 NAME
31:
32: localenroll
33:
34: =head1 SYNOPSIS
35:
36: This is part of the LearningOnline Network with CAPA project
37: described at http://www.lon-capa.org.
38:
39:
40: =head1 NOTABLE SUBROUTINES
41:
42: =over
43:
44: =cut
45:
1.4 raeburn 46: package localenroll;
47:
48: use strict;
1.6 albertel 49:
1.32 jms 50: =pod
51:
52: =item run()
53: set this to return 1 if you want the auto enrollment to run
54:
55: Beginning with LON-CAPA version 2.4, use of this routine is
56: deprecated. Whether or not Autoenroll.pl should run is set
57: by the Domain Coordinator via "Set domain configuration",
58: provided in the Domain Management section of the Main menu.
59:
60: =cut
1.6 albertel 61:
1.9 raeburn 62: sub run() {
63: my $dom = shift;
64: return 0;
65: }
1.4 raeburn 66:
1.32 jms 67:
68: =pod
69:
70: =item fetch_enrollment()
71:
72: connects to the institutional classlist data source,
73: reads classlist data and stores in an XML file
74: in /home/httpd/perl/tmp/
75:
76: classlist files are named as follows:
77:
78: DOMAIN_COURSE_INSTITUTIONALCODE_classlist.xml
79:
80: e.g., msu_43551dedcd43febmsul1_fs03nop590001_classlist.xml
81: where DOMAIN = msu COURSE = 43551dedcd43febmsul1
82: INSTITUTIONALCODE = fs03nop590001
83: (MSU's course naming scheme - fs03 = Fall semester 2003, nop =
84: department name, 590 = course number, 001 = section number.)
85:
86: fetch_enrollment requires three arguments -
87: $dom - DOMAIN e.g., msu
88: $affiliatesref - a reference to a hash of arrays that contains LON-CAPA
89: courses that are to be updated as keys, and institutional coursecodes
90: contributing enrollment to that LON-CAPA course as elements in each array.
91: $replyref - a reference to a hash that contains LON-CAPA courses
92: that are to be updated as keys, and the total enrollment count in all
93: affiliated sections, as determined from institutional data as hash elements.
94:
95: As an example, if fetch_enrollment is called to retrieve institutional
96: classlists for a single LON-CAPA course - 43551dedcd43febmsul1 which
97: corresponds to fs03nop590, sections 001, 601 and 602 , and the course
98: also accommodates enrollment from a crosslisted course in the ost
99: department - fs03ost580002:
100:
101: the affiliatesref would be a reference to %affiliates which would be:
102:
103: @{$affiliates{'43551dedcd43febmsul1'}} =
104: ("fs03nop590001","fs03nop590601","fs03nop590602","fs03ost580002");
105:
106: fetch_enrollment would create four files in /home/httpd/perl/tmp/.
107: msu_43551dedcd43febmsul1_fs03nop590001_classlist.xml
108: msu_43551dedcd43febmsul1_fs03nop590601_classlist.xml
109: msu_43551dedcd43febmsul1_fs03nop590602_classlist.xml
110: msu_43551dedcd43febmsul1_fs03ost580002_classlist.xml
111:
112: In each file, student data would be stored in the following format
113:
114: <student username="smith">
115: <autharg>MSU.EDU</autharg>
116: <authtype>krb4</authtype>
117: <email>smith@msu.edu</email>
118: <enddate></enddate>
119: <firstname>John</firstname>
120: <generation>II</generation>
121: <groupID>fs03nop590001</groupID>
122: <lastname>Smith</lastname>
123: <middlename>D</middlename>
124: <startdate></startdate>
125: <studentID>A12345678</studentID>
1.44 raeburn 126: <credits></credits>
127: <inststatus></inststatus>
1.32 jms 128: </student>
129:
130: with the following at the top of the file
131: <?xml version="1.0" encoding="UTF-8"?>
132: <!DOCTYPE text>
133: <students>
134:
135: (all comment - s removed)
136:
137: and a closing:
138: </students>
139:
140: The <startdate> and the <enddate> are the activation date and expiration date
141: for this student's role. If they are absent, then the default access start and
142: default access end dates are used. The default access dates can be set when
143: the course is created, and can be modified using the Automated Enrollment
144: Manager, or via the 'Upload a class list','Enroll a single student' or
145: 'Modify student data' utilities in the Enrollment Manager, by checking the
146: 'make these dates the default for future enrollment' checkbox. If no default
147: dates have been set, then the tudent role will be active immediately, and will
148: remain active until the role is explicitly expired using ENRL -> Drop students.
149: If dates are to included in the XML file, they should be in the format
150: YYYY:MM:DD:HH:MM:SS (: separators required).
151:
1.44 raeburn 152: The <credits> tag need only be used if the credits earned by the students will
153: be different from the default for the course. The course default is set when the
154: course is created and can be modifed by a Domain Coordinator via "View or
1.50 raeburn 155: modify a course or community" on the DC's Main Menu screen.
1.44 raeburn 156:
157: A value for <inststatus> should be the institutional status used for students,
1.50 raeburn 158: and should be one of the types defined in the "Institutional user types"
159: section in the domain config screen for:
160: "Default authentication/language/timezone/portal/types"
161:
162: If no status types are defined for the domain this tag can be omitted.
163: If Autoupdate.pl is enabled in your domain, updates to the institutional
164: status set here will be updated by Autoupdate.pl, should changes occur.
1.44 raeburn 165:
1.32 jms 166: If there were 10 students in fs03nop590001, 5 students in fs03nop59o601,
167: 8 students in fs03nop590602, and 2 students in fs03ost580002,
168: then $$reply{'43551dedcd43febmsul1'} = 25
169:
170: The purpose of the %reply hash is to detect cases where the institutional
171: enrollment is 0 (most likely due to a problem with the data source).
172: In such a case, the LON-CAPA course roster is left unchanged (i.e., no
173: students are expired, even if automated drops is enabled.
174:
175: fetch_enrollment should return a 0 or 1, depending on whether a connection
176: could be established to the institutional data source.
177: 0 is returned if no connection could be made.
178: 1 is returned if connection was successful
179:
180: A return of 1 is required for the calling modules to perform LON-CAPA
181: roster changes based on the contents of the XML classlist file(s), e,g,,
182: msu_43551dedcd43febmsul1_fs03nop590001_classlist.xml
183:
184: XML classlist files are temporary. They are deleted after the enrollment
185: update process in the calling module is complete.
186:
187:
188: =cut
1.1 raeburn 189:
190: sub fetch_enrollment {
1.7 matthew 191: my ($dom,$affiliatesref,$replyref) = @_;
192: foreach my $crs (sort keys %{$affiliatesref}) {
193: $$replyref{$crs} = 0;
194: }
195: my $okflag = 0;
196: return $okflag;
1.4 raeburn 197: }
198:
1.32 jms 199: =pod
200:
201: =item get_sections()
202:
203: This is called by the Automated Enrollment Manager interface
204: (lonpopulate.pm) to create an array of valid sections for
205: a specific institutional coursecode.
206: e.g., for MSU coursecode: fs03nop590
207: ("001","601","602") would be returned
208:
209: If the array returned contains at least one element, then
210: the interface offerred to the course coordinator, lists
211: official sections and provides a checkbox to use to
212: select enrollment in the LON-CAPA course from each official section.
213:
214: get_sections takes two arguments - (a) the institutional coursecode
215: (in the MSU case this is a concatenation of semester code, department
216: and course number), and (b) the LON-CAPA domain that contains the course.
217:
218: If there is no access to official course sections at your institution,
219: then an empty array is returned, and the Automated Enrollment Manager
220: interface will allow the course coordinator to enter section numbers
221: in text boxes.
222:
223:
224:
225: =cut
1.4 raeburn 226:
227: sub get_sections {
1.9 raeburn 228: my ($coursecode,$dom) = @_;
1.4 raeburn 229: my @secs = ();
230: return @secs;
1.1 raeburn 231: }
232:
1.32 jms 233: =pod
234:
235: =item new_course()
236:
237: This is called by loncreatecourse.pm and
238: lonpopulate.pm to record that fact that a new course section
239: has been added to LON-CAPA that requires access to institutional data
240: At MSU, this is required, as institutional classlists can only made
241: available to faculty who are officially assigned to a course.
242:
243: The new_course subroutine is used to check that the course owner
244: of the LON-CAPA course is permitted to access the institutional
245: classlist for any course sections and crosslisted classes that
246: the course coordinator wishes to have affiliated with the course.
247:
248: If access is permitted, then 'ok' is returned.
249: The course section or crosslisted course will only be added to the list of
250: affiliates if 'ok' is returned.
251:
1.41 raeburn 252: new_course takes three required arguments -
1.32 jms 253: (a) the institutional courseID (in the MSU case this is a concatenation of
254: semester code, department code, course number, and section number
255: e.g., fs03nop590001).
256: (b) the course owner. This is the LON-CAPA username and domain of the course
257: coordinator assigned to the course when it is first created, in the form
258: username:domain
259: (c) the LON-CAPA domain that contains the course
260:
1.41 raeburn 261: new_course also takes a fourth (optional) argument -
262: (d) the course co-owners, as a comma-separated list of username:domain for
263: any co-owners.
264:
1.32 jms 265: =cut
1.4 raeburn 266:
267: sub new_course {
1.41 raeburn 268: my ($course_id,$owner,$dom,$coowners) = @_;
1.4 raeburn 269: my $outcome = 'ok';
270: return $outcome;
1.1 raeburn 271: }
272:
1.32 jms 273: =pod
274:
275: =item validate_courseID()
276:
277: This is called whenever a new course section or crosslisted course
278: is being affiliated with a LON-CAPA course (i.e., by loncreatecourse.pm
279: and the Automated Enrollment Manager in lonpopulate.pm).
280: A check is made that the courseID that the course coordinator wishes
281: to affiliate with the course is valid according to the institutional
282: schedule of official classes
283:
284: A valid courseID is confirmed by returning 'ok'
285:
286: validate_courseID takes two arguments -
287: (a) the institutional courseID (in the MSU case this is a concatenation of
288: semester code, department code, course number, and section number
289: e.g., fs03nop590001).
290: (b) the LON-CAPA domain that contains the course
291:
292: =cut
1.4 raeburn 293:
294: sub validate_courseID {
1.9 raeburn 295: my ($course_id,$dom) = @_;
1.4 raeburn 296: my $outcome = 'ok';
297: return $outcome;
298: }
1.1 raeburn 299:
1.32 jms 300: =pod
301:
1.36 raeburn 302: =item validate_instcode()
303:
304: This is called when a request is being made for an official course.
305: A check is made that the institutional code for which a course is
306: is being requested is valid according to the institutional
307: schedule of official classes.
308:
309: If the username of the course owner is provided, a more restrictive
310: test is used, namely that the requestor is listed as instructor of
311: record for the course in the institution's course schedule/database.
312:
1.38 raeburn 313: validate_instcode takes three arguments -
1.36 raeburn 314: (a) the LON-CAPA domain that will contain the course
315: (b) the institutional code (in the MSU case this is a concatenation of
316: semester code, department code, and course number, e.g., fs03nop590.
317: (c) an optional institutional username for the course owner.
318:
1.39 raeburn 319: An array is returned containing (a) the result of the check for a valid
1.44 raeburn 320: instcode, (b) an (optional) course description, and (c) the default credits
321: earned by students when completing this course. If no institutional credits
322: value is available, the default credits for the course can be set via the
323: course request form, or via XML in a batch file, of via the web form used
324: by the Domain Coordinator to create new courses one at a time.
325:
1.39 raeburn 326: A valid instcode is confirmed by returning 'valid'.
1.44 raeburn 327:
1.39 raeburn 328: If no course description is available, '' should be set as
329: the value of the second item in the returned array.
330:
1.36 raeburn 331: =cut
332:
333: sub validate_instcode {
1.38 raeburn 334: my ($dom,$instcode,$owner) = @_;
1.36 raeburn 335: my $outcome = '';
1.39 raeburn 336: my $description = '';
1.44 raeburn 337: my $credits = '';
338: return ($outcome,$description,$credits);
1.36 raeburn 339: }
340:
341: =pod
342:
1.38 raeburn 343: =item validate_crsreq()
344:
345: This is used to check whether a course request should be processed
346: automatically, or held in a queue pending administrative action at
347: the institution.
348:
349: Course requests will trigger this check if the process type has been set
350: to 'validate' for the course type (official, unofficial or community) and
351: the requestor's affiliation. Whether "validate" is an available option
352: in the Domain Configuration menu is controlled by auto_courserequest_checks().
353: One scenario is where the request is for an official course, in which case
354: a check could be made that the requestor is listed as instructor of
355: record for the course in the institution's course schedule/database.
356:
357: Other scenarios are possible, and the routine can be customized according
358: to whatever rules a domain wishes to implement to run validations against
359: given the data passed in to the routine.
360:
1.51 ! raeburn 361: validate_crsreq takes seven arguments -
1.38 raeburn 362: (a) the LON-CAPA domain that will contain the course.
363: (b) the username:domain for the course owner.
364: (c) the course type (official, unofficial or community)
365: (d) a comma-separated list of institutional affiliations of
366: the course owner.
367: (e) the institutional code (in the MSU case this is a concatenation of
1.46 raeburn 368: semester code, department code, and course number, e.g., fs03nop590).
1.38 raeburn 369: (f) a comma-separated list of institutional sections included in
370: the course request (only applicable to official courses).
1.46 raeburn 371: (g) an optional reference to a hash of custom form data.
372: The custom form data will come from crsreq_updates().
1.38 raeburn 373:
374: A valid courserequest is confirmed by returning 'process'.
1.46 raeburn 375: The following can be returned: process, rejected, pending, approval or
376: error (with error condition - no :), followed by a : and then an optional message.
1.38 raeburn 377:
378: (a) process - the requestor is the recorded instructor - create the course
1.40 raeburn 379: (b) rejected - the requestor should never be requesting this course, reject the
1.38 raeburn 380: request permanently
381: (c) pending - the requestor is not the recorded instructor, but could
382: become so after administrative action at the institution. Put the
1.46 raeburn 383: request in a queue and, if an official course, check
384: localenroll:validate_instcode() periodically until the status changes to
385: "valid".
1.38 raeburn 386: (d) approval - the request will be held pending review by a Domain Coordinator.
387: (e) error (followed by the error condition).
388:
389: =cut
390:
391: sub validate_crsreq {
1.46 raeburn 392: my ($dom,$owner,$crstype,$inststatuslist,$instcode,$instseclist,$custominfo) = @_;
1.38 raeburn 393: my $outcome = 'approval';
394: return $outcome;
395: }
396:
397: =pod
398:
399: =item crsreq_checks()
400:
401: This is used to determine whether the "validate" option should appear in the
402: possible choices for course request processing in the Domain Configuration
403: menu for Course Requests. Ultimately it is called by domainprefs.pm (via:
404: lonnet -> lond -> localenroll.pm) The domain configuration menu includes
405: a table where columns are course type (official, unofficial or community)
406: and rows are institutional affiliations (e.g., Faculty, Staff, Student etc.).
407:
1.42 raeburn 408: crsreq_checks() takes three arguments: $dom, $reqtypes, $validations.
1.38 raeburn 409: $dom - the domain for which validation options are needed.
410: $reqtypes - ref to an ARRAY of course types (i.e., official, unofficial and community.
411: $validations - ref to a hash of a hash which will determine whether "validate"
412: will be one of the possible choices for each course type (outer hash key),
413: and institutional type (inner hash key).
414:
415: For example to allow validate to be a choice for official classes for Faculty,
416: req_checks would include:
417:
418: $validations{'official'}{'Faculty'} = 1;
419:
420: This routine is closely tied to validate_crsreq(). "Validate" should not be
421: a possible choice in the domain configuration menu for a particular course
422: type/institutional affiliation, unless a corresponding validation code has
423: been implemented in validate_crsreq().
424:
425: For example at MSU, official courses requested by Faculty will be validated
426: against the official schedule of classes to check that the requestor is one
427: of the instructors of record for the course. In this case validate_crsreq()
428: includes a call to validate_instcode().
429:
430: =cut
431:
432: sub crsreq_checks {
433: my ($dom,$reqtypes,$validations) = @_;
434: if ((ref($reqtypes) eq 'ARRAY') && (ref($validations) eq 'HASH')) {
435: my (%usertypes,@order);
436: if (&inst_usertypes($dom,\%usertypes,\@order) eq 'ok') {
437: foreach my $type (@{$reqtypes}) {
438: foreach my $inst_type (@order) {
439: $validations->{$type}{$inst_type} = 0;
440: }
441: }
442: }
443: }
444: return 'ok';
445: }
446:
1.45 raeburn 447: sub crsreq_updates {
448: my ($cdom,$cnum,$crstype,$action,$ownername,$ownerdomain,$fullname,$title,
1.47 raeburn 449: $code,$accessstart,$accessend,$incoming,$outgoing) = @_;
1.45 raeburn 450: unless (ref($outgoing) eq 'HASH') {
451: return 'fail';
452: }
453: my %extrainfo;
454: if (ref($incoming) eq 'HASH') {
455: %extrainfo = %{$incoming};
456: }
457: if ($action eq 'review') {
458: $outgoing->{'reviewweb'} = '';
1.46 raeburn 459: } elsif ($action eq 'prevalidate') {
460: $outgoing->{'formitems'} = {}; # key=>value, where key is form element name
461: # and value is multiple, if there
462: # are multiple form elements with
463: # the same name.
1.45 raeburn 464: } elsif ($action eq 'process') {
465: $outgoing->{'formitems'} = {}; # key=>value, where key is form element name
466: # and value is multiple, if there
467: # are multiple form elements with
1.46 raeburn 468: # the same name.
1.45 raeburn 469: } elsif ($action eq 'created') {
470: $outgoing->{'createdweb'} = '';
471: $outgoing->{'createdmsg'} = [{
472: mt => '',
473: args => [],
474: }];
1.48 raeburn 475: $outgoing->{'createdactions'} = {
476: environment => {},
477: };
478: # environment can contain key=>value for
479: # items to set in the course environment.
480: # These would be items which are NOT included
481: # in the items set via options in the course
482: # request form. Currently self-enrollment
483: # settings are the only ones allowed, i.e.,
484: # internal.selfenroll_types internal.selfenroll_registered
485: # internal.selfenroll_section internal.selfenroll_start_access
486: # internal.selfenroll_end_access internal.selfenroll_limit
487: # internal.selfenroll_cap internal.selfenroll_approval
488: # internal.selfenroll_notifylist
1.45 raeburn 489: } elsif ($action eq 'queued') {
1.46 raeburn 490: $outgoing->{'queuedmsg'} = [{
491: mt => '',
1.45 raeburn 492: args => [],
493: }];
494: $outgoing->{'queuedweb'} = '';
495: }
496: return 'ok'
497: }
498:
1.38 raeburn 499: =pod
500:
1.32 jms 501: =item create_password()
502:
503: This is called when the authentication method set for the automated
504: enrollment process when enrolling new users in the domain is "localauth".
505: This could be signalled for the specific user by the value of localauth
506: for the <authtype> tag from the classlist.xml files, or if this is blank,
507: the default authtype, set by the domain coordinator when creating the course
508: with loncreatecourse.pm.
509:
510: create_password takes three arguments -
511: (a) $authparam - the value of <autharg> from the classlist.xml files,
512: or if this blank, the default autharg, set by the domain coordinator when
513: creating the course with loncreatecourse.pm
514: (b) $dom - the domain of the new user.
515: (c) $username - the username of the new user (currently not actually used)
516:
517: Four values are returned:
518: (a) the value of $authparam - which might have been changed
519: (b) a flag to indicate whether a password had been created
520: 0 means no password created
521: 1 means password created. In this case the calling module - Enrollment.pm
522: will send the LON-CAPA username and password to the new user's e-mail
523: (if one was provided), or to the course owner (if one was not provided and
524: the new user was created by the automated process), or to the active
525: course coordinator (if the new user was created using the 'update roster
526: now' interface included in the Automated Enrollment Manager).
527: (c) a flag to indicate that the authentication method is correct - 'ok'.
528: If $authchk is not set to 'ok' then account creation and enrollment of the
529: new user will not occur.
530: (d) if a password was created it can be sent along. This is the password
531: which will be included in the e-mail sent to the new user, or made available
532: to the course owner/course coordinator if no e-mail address is provided. If
533: you do not wish to send a password, but want to give instructions on obtaining
534: one, you could set $newpasswd as those instructions. (e.g.,
535: $newpasswd = '(Please visit room 212, ACNS Bldg. to obtain your password)';
536: The value of $newpasswd is NOT written in the user's LON-CAPA passwd file in
537: /home/httpd/lonUsers/$dom/a/b/c/abcuser/passwd, which in the case of a user
538: employing localauth will contain 'localauth:$authparam'. If you need to include
539: a parameter in the user's passwd file, you should return it as $authparam,
540: i.e., the first of the variables returned by create_password().
541:
542:
543: =cut
1.4 raeburn 544:
545: sub create_password {
1.13 albertel 546: my ($authparam,$dom,$username) = @_;
1.4 raeburn 547: my $authchk = 'ok';
1.11 raeburn 548: my $newpasswd = '';
1.4 raeburn 549: my $create_passwd = 0;
1.11 raeburn 550: return ($authparam,$create_passwd,$authchk,$newpasswd);
1.1 raeburn 551: }
552:
1.32 jms 553: =pod
554:
555: =item instcode_format()
556:
557: Split coursecodes into constituent parts.
558: e.g., INSTITUTIONALCODE = fs03nop590, LON-CAPA COURSEID: 43551dedcd43febmsul1
559: (MSU's course naming scheme - fs03 = Fall semester 2003, nop =
560: department name, 590 = course number)
561:
562: Incoming data:
563: $dom (domain)
564: $$instcodes{'43551dedcd43febmsul1'} = 'fs03nop590' (hash of courseIDs)
565:
566: fs03nop590 would be split as follows
567: @{$codetitles} = ("year","semester","department","number")
1.33 bisitz 568: $$codes{'year'} = '2003'
1.32 jms 569: $$codes{'semester'} = 'Fall'
570: $$codes{'department'} = 'nop'
571: $$codes{'number'} = '590'
572:
573: requires six arguments:
574: domain ($dom)
575: reference to hash of institutional course IDs ($instcodes)
576: reference to hash of codes ($codes)
577: reference to array of titles ($codetitles)
578: reference to hash of abbreviations used in categories
579: reference to hash of arrays specifying sort order used in category titles
580:
581: e.g., %{$$cat_titles{'Semester'}} = (
582: fs => 'Fall',
583: ss => 'Spring',
584: us => 'Summer');
585:
586: e.g., @{$$cat_order{'Semester'}} = ('ss','us','fs');
587: returns 1 parameter: 'ok' if no processing errors.
1.33 bisitz 588:
589: Detailed help:
590: http://yourloncapaserver/adm/help/Institutional_Integration_Course_Codes.hlp
591:
1.32 jms 592: =cut
593:
1.10 raeburn 594:
595: sub instcode_format () {
596: my ($dom,$instcodes,$codes,$codetitles,$cat_titles,$cat_order) = @_;
597: my $outcome = 'ok';
598: return $outcome;
599: }
600:
1.35 raeburn 601: =pod
602:
603: =item possible_instcodes()
604:
605: Gather acceptable values for institutional categories to use in course creation request form for official courses.
606:
1.40 raeburn 607: requires five arguments:
608:
1.35 raeburn 609: domain ($dom)
610: reference to array of titles ($codetitles)
611: reference to hash of abbreviations used in categories ($cat_titles).
1.40 raeburn 612: reference to hash of arrays specifying sort order used in
613: category titles ($cat_order).
614: reference to array which will contain order of component parts used
615: in institutional code ($code_order).
1.35 raeburn 616:
617: e.g.,
1.40 raeburn 618: @{$codetitles} = ('Year','Semester',"Department','Number');
1.35 raeburn 619:
620: %{$$cat_titles{'Semester'}} = (
621: fs => 'Fall',
622: ss => 'Spring',
623: us => 'Summer');
624:
625: @{$$cat_order{'Semester'}} = ('ss','us','fs');
1.40 raeburn 626: @{$code_order} = ('Semester','Year','Department','Number');
1.35 raeburn 627:
628: returns 1 parameter: 'ok' if no processing errors.
629:
630: =cut
631:
632: sub possible_instcodes {
1.40 raeburn 633: my ($dom,$codetitles,$cat_titles,$cat_order,$code_order) = @_;
1.35 raeburn 634: @{$codetitles} = ();
635: %{$$cat_titles{'Semester'}} = ();
636: @{$$cat_order{'Semester'}} = ('ss','us','fs');
1.40 raeburn 637: @{$code_order} = ();
1.35 raeburn 638: return 'ok';
639: }
640:
641:
1.32 jms 642: =pod
643:
644: =item institutional_photos()
645:
646: Called when automated enrollment manager is used to update student photos.
647:
648: Incoming data: six arguments
649: (a) $dom (domain)
650: (b) $crs (LONCAPA course number)
651: (c) $affiliates: a reference to a hash with the keys set to the
652: institutional course IDs for the course.
653: (d) $result: a reference to a hash which will return usernames
654: of students (& separated) in following categories (the keys):
655: new, update, missing, same, deleted, noid, nouser. The list
656: includes those students for whom the result of the modification
657: process was either addition of a new photo. update of an
658: existing photo, photo was found to be missing from institution's
659: data store, photo used is same as before, or photo was
660: deleted from storage on LON-CAPA server housing student's
1.34 weissno 661: information, no student/employee ID was available.
1.12 raeburn 662:
1.32 jms 663: (e) $action: the type of action needed. (e.g., update, delete);
664: (f) $students: a reference to a hash with the keys set to student
665: usernames and domains in the form username:domain, and values set
666: to the studentID, if action is required for specific students.
667:
668: returns 1 parameter: 'ok' if no processing errors.
669: other course or student specific values can be stored as values
670: in the appropriate referenced hashes.
671:
672: =cut
1.12 raeburn 673:
674: sub institutional_photos {
675: my ($dom,$crs,$affiliates,$result,$action,$students) = @_;
676: my $outcome = 'ok';
677: return $outcome;
678: }
679:
1.32 jms 680: =pod
681:
682: =item photo_permission()
683:
684: Incoming data: three arguments
685: (a) $dom (domain)
686: (b) $perm_reqd: a reference to a a scalar that is either 'yes'
687: if a course owner must indicate acceptance of conditions of use,
688: 'no' otherwise.
689: (c) $conditions: the text of the conditions of use.
690:
691: returns 1 parameter: 'ok' if no processing errors.
692: $$perm_reqd is set to 'yes' or 'no'
693: $$agreement is set to conditions of use - plain text string
694: which will be displayed in a textarea in a web form.
695:
696:
697: =cut
698:
1.12 raeburn 699: sub photo_permission {
700: my ($dom,$perm_reqd,$conditions) = @_;
701: $$perm_reqd = 'no';
702: $$conditions = '';
703: my $outcome = 'ok';
704: return $outcome;
705: }
706:
1.32 jms 707: =pod
708:
709: =item manager_photo_update()
710:
711: Incoming data: one argument
712: (a) $dom (domain)
713:
714: returns 2 parameters: update (0 or 1), and comment.
715: Called by automated enrollment manager, to determine
716: whether "Update Student photos" button will be available,
717: and if so, the message (plain text string) that will be displayed
718: with the button.
1.12 raeburn 719:
1.32 jms 720:
721: =cut
1.12 raeburn 722:
723: sub manager_photo_update {
724: my ($dom) = @_;
725: my $update = 0;
726: my $comment = '';
727: return ($update,$comment);
728: }
729:
1.32 jms 730: =pod
731:
732:
733: =item check_section()
734:
735: Incoming data: three arguments (+ fourth optional argument)
736: (a) $class - institutional class id (coursecode concatanated with section)
737: (b) $owner - course owner (2.2 and later username:domain; pre-2.2 username;
738: 2.6 and later - comma-separated list of
739: username:domain for course owner and co-owners.)
740: (c) $dom - domain of course
741: (d) $dbh - optional database handle
742:
743: returns 1 parameter - $sectioncheck ('ok' or other value).
744: Verifies that at least one of the course owner (or co-owners) have access
745: to classlist for specific class according to institution's SIS
746: 'ok' if access available
747:
748:
749: =cut
1.16 raeburn 750:
751: sub check_section {
752: my ($class,$owner,$dom,$dbh) = @_;
753: my $sectioncheck = 'ok';
754: return $sectioncheck;
755: }
756:
1.32 jms 757: =pod
758:
759: =item instcode_defaults()
760:
761: Incoming data: three arguments
762: (a) $dom - domain
763: (b) $defaults - reference to hash which will contain default regular
764: expression matches for different components of an
765: institutional course code
766: (c) $code_order - reference to array which will contain order of
767: component parts used in institutional code.
768:
769: returns 1 parameter - ('ok' or other value).
770: Used to construct a regular expression to be used when searching for
771: courses based on fragments of an institutional code.
772: $defaults contains defaults to use for each component, and code_order
773: contains keys of hash in order in which they are to be concatenated.
774:
775: e.g., INSTITUTIONALCODE = fs03nop590
776: (MSU's course naming scheme - fs = semester, 03 = year, nop =
777: department name, 590 = course number)
778:
779: %{$defaults} = (
780: 'Year' => '\d{2}',
781: 'Semester' => '^[sfu]s',
782: 'Department' => '\w{2,3}',
783: 'Number' => '\d{3,4}\w?',
784: );
785:
786: @{$code_order} = ('Semester','Year','Department','Number');
787:
1.33 bisitz 788: Detailed help:
789: http://yourloncapaserver/adm/help/Institutional_Integration_Course_Codes.hlp
790:
1.32 jms 791: =cut
1.17 raeburn 792:
793: sub instcode_defaults {
794: my ($dom,$defaults,$code_order) = @_;
795: return 'ok';
796: }
797:
1.32 jms 798:
799: =pod
800:
801: =item allusers_info()
802:
803: Incoming data: three arguments
804: (a) $dom - domain
805: (b) $instusers - reference to hash which will contain hashes,
806: where keys will be usernames and value will be a
807: hash of user information. Keys in the inner hash
808: will be some or all of: lastname,firstname,
809: middlename, generation, id, inststatus -
810: institutional status (e.g., faculty,staff,student)
811: Values are all scalars except inststatus,
812: which is an array.
813: (c) $instids - reference to hash which will contain ID numbers.
814: keys will be unique IDs (student or faculty/staff ID)
815: values will be either: scalar (username) or an array
816: if a single ID matches multiple usernames.
1.43 raeburn 817: (d) $lc_users - reference to hash containing LON-CAPA usernames in
818: in domain $dom, as keys. Needed if institutional
819: data source only allows query by username.
1.32 jms 820: returns 1 parameter - 'ok' if no processing error, or other value
821: if an error occurred.
822: side effects - populates the $instusers and $instids refs to hashes.
823: with information for all users from all available
824: institutional datafeeds.
825:
826:
827: =cut
1.18 raeburn 828:
829: sub allusers_info {
1.43 raeburn 830: my ($dom,$instusers,$instids,$lc_users) = @_;
1.18 raeburn 831: my $outcome = 'ok';
832: return $outcome;
833: }
834:
1.32 jms 835: =pod
836:
837: =item get_userinfo()
838:
839: Incoming data: four required arguments and additional optional arguments
840: Two modes of operation:
841: (1) Retrieves institutional data for a single user either by username
842: if $uname is included as second argument, or by ID if $id is
843: included as a third argument. Either (b) or (c) must be provided.
844: (g), (h) and (i) will be undefined.
845: (2) Retrieves institutional user data from search of an institutional
846: directory based on a search. (g) and (h) are required.
847: (i) is optional. (b) and (c) will be undefined.
848:
849: (a) $dom - domain
850: (b) $uname - username of user
851: (c) $id - student/faculty ID of user
852: (d) $instusers - reference to hash which will contain info for user
853: as key = value; keys will be one or all of:
854: lastname,firstname,middlename,generation,id,inststatus -
855: institutional status (e.g., faculty,staff,student)
856: Values are all scalars except inststatus,
857: which is an array.
858: (e) $instids - reference to hash which will contain ID numbers -
859: keys will be unique IDs (student or faculty/staff ID)
860: values will be either: scalar (username) or an array
861: if a single ID matches multiple usernames.
862: (f) $types - optional reference to array which contains
863: institutional types to check.
864: (g) $srchby - optional if $uname or $id defined, otherwise required.
865: Allowed values include: 1. lastfirst, 2. last, 3. uname
866: corresponding to searches by 1. lastname,firstname;
867: 2. lastname; 3. username
868: (h) $srchterm - optional if $uname or $id defined, otherwise required
869: String to search for.
870: (i) $srchtype - optional. Allowed values: contains, begins (defaults
871: to exact match otherwise).
872:
873: returns 1 parameter - 'ok' if no processing error, or other value
874: if an error occurred.
875: side effects - populates the $instusers and $instids refs to hashes.
876: with information for specified username, or specified
877: id, if fifth argument provided, from all available, or
878: specified (e.g., faculty only) institutional datafeeds,
879: if sixth argument provided.
880:
881: WARNING: You need to set $outcome to 'ok' once you have customized
882: this routine to communicate with an instititional
883: directory data source, otherwise institutional directory
884: searches will always be reported as being unavailable
885: in domain $dom.
886:
887: =cut
1.18 raeburn 888:
889: sub get_userinfo {
1.21 raeburn 890: my ($dom,$uname,$id,$instusers,$instids,$types,
891: $srchby,$srchterm,$srchtype) = @_;
1.24 raeburn 892: my $outcome = 'unavailable';
1.18 raeburn 893: return $outcome;
894: }
895:
1.32 jms 896: =pod
897:
898: =item inst_usertypes()
899:
1.49 raeburn 900: Starting with LON-CAPA 2.11.0 use of this subroutine
901: is deprecated. The domain configuration web GUI
902: accessible to Domain Coordinators will be used to
903: manage institutional types. If you have previously
904: customized this routine, then values set there will
905: be used when displaying the "Institutional user types"
906: section in the domain config screen for:
907: "Default authentication/language/timezone/portal/types".
908:
909: Once you have visited that screen and saved the settings,
910: configuration thereafter will be via the web GUI of
911: values stored in the domain's configuration.db file on
912: the primary library server in the domain, and values in
913: inst_usertypes() will no longer be consulted.
914:
1.32 jms 915: Incoming data: three arguments
916: (a) $dom - domain
917: (b) $usertypes - reference to hash which will contain
918: key = value, where keys are institution
919: affiliation types (e.g., Faculty, Student etc.)
920: and values are titles (e.g., Faculty/Academic Staff)
921: (c) $order - reference to array which will contain the order in
922: which institutional types should be shown
923: when displaying data tables (e.g., default quotas
924: or updateable user fields (see domainprefs.pm)
925: returns 1 parameter - 'ok' if no processing error, or other value
926: if an error occurred.
927:
928:
929: =cut
1.18 raeburn 930:
931: sub inst_usertypes {
932: my ($dom,$usertypes,$order) = @_;
1.20 raeburn 933: @{$order} = ();
934: %{$usertypes} = ();
1.18 raeburn 935: my $outcome = 'ok';
936: return $outcome;
937: }
1.17 raeburn 938:
1.32 jms 939: =pod
940:
941: =item username_rules()
942:
943: Incoming data: three arguments
944: (a) $dom - domain
945: (b) $ruleshash - reference to hash containing rules
946: (a hash of a hash)
947: keys of top level hash are short names
948: (e.g., netid, noncredit)
949: for each key, value is a hash
950: desc => long name for rule
951: rule => description of rule
952: authtype => (krb5,krb4,int, or loc)
953: authentication type for rule
954: authparm => authentication parameter for rule
955: authparmfixed => 1 if authparm used when
956: creating user for rule must be authparm
957: authmsg => Message to display describing
958: authentication to use for this rule
959:
960: (c) $rulesorder - reference to array containing rule names
961: in order to be displayed
962:
963:
964: returns 'ok' if no processing error.
1.25 raeburn 965:
1.32 jms 966: =cut
1.25 raeburn 967:
968: sub username_rules {
969: my ($dom,$ruleshash,$rulesorder) = @_;
970: my $outcome;
971: return $outcome;
972: }
973:
1.32 jms 974: =pod
975:
976: =item id_rules()
977:
978: Incoming data: three arguments
979: (a) $dom - domain
980: (b) $ruleshash - reference to hash containing rules
981: (a hash of a hash)
982: keys of top level hash are short names
983: (e.g., netid, noncredit)
984: for each key, value is a hash
985: desc => long name for rule
986: rule => description of rule
987:
988: (c) $rulesorder - reference to array containing rule names
989: in order to be displayed
990:
991: returns 'ok' if no processing error.
992:
993: =cut
1.27 raeburn 994:
1.30 raeburn 995: sub id_rules {
996: my ($dom,$ruleshash,$rulesorder) = @_;
997: my $outcome;
998: return $outcome;
999: }
1000:
1.32 jms 1001: =pod
1002:
1003: =item selfcreate_rules()
1004:
1005: Incoming data: three arguments
1006: (a) $dom - domain
1007: (b) $ruleshash - reference to hash containing rules
1008: (a hash of a hash)
1009: keys of top level hash are short names
1010: (e.g., netid)
1011: for each key, value is a hash
1012: desc => long name for rule
1013: rule => description of rule
1014:
1015: (c) $rulesorder - reference to array containing rule names
1016: in order to be displayed
1017:
1018: returns 'ok' if no processing error.
1019:
1.27 raeburn 1020:
1.32 jms 1021: =cut
1.30 raeburn 1022:
1.31 raeburn 1023: sub selfcreate_rules {
1.27 raeburn 1024: my ($dom,$ruleshash,$rulesorder) = @_;
1025: my $outcome;
1026: return $outcome;
1027: }
1028:
1.32 jms 1029: =pod
1030:
1031: =item username_check()
1032:
1033: Incoming data: four arguments
1034: (a) $dom - domain (scalar)
1035: (b) $uname - username to compare against rules (scalar)
1036: (c) $to_check (reference to array of rule names to check)
1037: (d) $resultshash (reference to hash of results)
1038: hash of results for rule checked
1039: - keys are rule names
1040: - values are: 1 or 0 (for matched or unmatched)
1041:
1042: returns 'ok' if no processing error.
1043:
1044:
1045: =cut
1.25 raeburn 1046:
1047: sub username_check {
1048: my ($dom,$uname,$to_check,$resultshash) = @_;
1049: my $outcome;
1050: return $outcome;
1051: }
1052:
1.32 jms 1053: =pod
1054:
1055: =item id_check()
1056:
1057: Incoming data: four arguments
1058: (a) $dom - domain (scalar)
1059: (b) $id - ID to compare against rules (scalar)
1060: (c) $to_check (reference to array of rule names to check)
1061: (d) $resultshash (reference to hash of results)
1062: hash of results for rule checked
1063: - keys are rule names
1064: - values are: 1 or 0 (for matched or unmatched)
1065:
1066: returns 'ok' if no processing error.
1067:
1068:
1069: =cut
1.27 raeburn 1070:
1071: sub id_check {
1072: my ($dom,$id,$to_check,$resultshash) = @_;
1073: my $outcome;
1074: return $outcome;
1075: }
1076:
1.32 jms 1077: =pod
1078:
1079: =item selfcreate_check()
1080:
1081: Incoming data: four arguments
1082: (a) $dom - domain (scalar)
1083: (b) $selfcreatename - e-mail proposed as username (compare against rules - scalar)
1084: (c) $to_check (reference to array of rule names to check)
1085: (d) $resultshash (reference to hash of results)
1086: hash of results for rule checked
1087: - keys are rule names
1088: - values are: 1 or 0 (for matched or unmatched)
1089:
1090: returns 'ok' if no processing error.
1091:
1092:
1093: =cut
1.30 raeburn 1094:
1.31 raeburn 1095: sub selfcreate_check {
1096: my ($dom,$selfcreatename,$to_check,$resultshash) = @_;
1.30 raeburn 1097: my $outcome;
1098: return $outcome;
1099: }
1100:
1.32 jms 1101: =pod
1102:
1103: =item AUTOLOAD()
1104:
1105: Incoming data: none
1106: Returns ''
1107:
1108: Prevents errors when undefined subroutines are called in this package
1109: Will allow new routines added in the future to be called from lond etc.
1110: without the need for customized versions of local*.pm packages to be
1111: modified to include the new subroutines immediately.
1112:
1113: See "Programming Perl" 3rd ed. pp 296-298.
1114:
1115: =back
1116:
1117: =cut
1.14 raeburn 1118:
1119: sub AUTOLOAD {
1120: our $AUTOLOAD;
1121: return '';
1122: }
1123:
1.1 raeburn 1124: 1;
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/back.gif){kind=icon}
Return to localenroll.pm CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [LON-CAPA] / loncom / enrollment