--- loncom/homework/functionplotresponse.pm 2010/10/04 18:28:53 1.3 +++ loncom/homework/functionplotresponse.pm 2012/02/28 22:42:31 1.93 @@ -1,7 +1,7 @@ # LearningOnline Network with CAPA -# option list style responses +# Functionplot responses # -# $Id: functionplotresponse.pm,v 1.3 2010/10/04 18:28:53 www Exp $ +# $Id: functionplotresponse.pm,v 1.93 2012/02/28 22:42:31 www Exp $ # # Copyright Michigan State University Board of Trustees # @@ -31,16 +31,33 @@ use strict; use Apache::response(); use Apache::lonlocal; use Apache::lonnet; - +use Apache::run; +use LONCAPA; + BEGIN { - &Apache::lonxml::register('Apache::functionplotresponse',('functionplotresponse')); + &Apache::lonxml::register('Apache::functionplotresponse',('functionplotresponse','backgroundplot','spline', + 'plotobject','plotvector', + 'functionplotvectorrule','functionplotvectorsumrule', + 'drawvectorsum', + 'functionplotcustomrule', + 'functionplotrule','functionplotruleset', + 'functionplotelements')); } +# +# There can be a number of applets on a page, each called ggbApplet_$id, +# where $id is the "_"-concatenated part and responseid +# + sub geogebra_startcode { - my ($id)=@_; + my ($id,$width,$height)=@_; + $width=int(1.*$width); + $height=int(1.*$height); + unless ($width) { $width=700; } + unless ($height) { $height=400; } return (< + codebase="/adm/geogebra/" width="$width" height="$height" MAYSCRIPT> ENDSTARTCODE } @@ -49,21 +66,26 @@ sub geogebra_endcode { return &Apache::lonhtmlcommon::java_not_enabled()."\n"; } +# +# This is the internal GeoGebra bytecode which defines the spline functions +# sub geogebra_spline_program { return (< + ENDSPLINEPROGRAM } +# +# The standard set of parameters inside +# sub geogebra_default_parameters { my ($id)=@_; return(< - - - + + @@ -82,13 +104,33 @@ sub geogebra_default_parameters { ENDDEFAULTPARAMETERS } +# +# This subroutine is called by LON-CAPA at +# Each applet on the page will call function ggbOnInit when it is done loading +# This function in turn will call the respective function registered by start_init_script +# Which one of the registered functions is called is determined by ggbOnInitParam, which GeoGebra passes to ggbOnInit +# + sub init_script { - if ($Apache::functionplotresponse::callscripts) { + if ($#Apache::functionplotresponse::callscripts>=0) { + my $script=''; + foreach my $id (@Apache::functionplotresponse::callscripts) { + $script.="if (param=='applet_$id') { loaded_$id=true; }\n"; + } + $script.="if (".join(' && ',map { "loaded_$_" } (@Apache::functionplotresponse::callscripts)). + ") { setTimeout('ggbInitAll()',200) }"; + my $calls=join("\n",map { "ggbInit_$_();" } (@Apache::functionplotresponse::callscripts)); return (< // @@ -96,17 +138,1002 @@ ENDGGBINIT } } +# +# Each Geogebra applet is supposed to call this when parameters change +# Changes the hidden fields on the web page +# +sub update_script { + my ($id)=@_; + return (< +// + +ENDUPDATESCRIPT +} + +# +# Register the above update-handler for a variable +# + +sub update_register { + my ($id,$variable)=@_; + return "document.ggbApplet_$id.registerObjectUpdateListener('$variable','updatePointCoordinates_$id');\n"; +} + +# +# Set a point coordinate variable +# +sub set_point_coordinate { + my ($id,$variable,$x,$y,$fixed)=@_; + my $mult=($fixed?'a*':''); +# Get rid of wild exponents, make sure it's a number + $x=1.*$x; + $y=1.*$y; +# GeoGebra does not understand "E" + $x=~s/[e|E]/\*10\^/; + $x=~s/\+//; + $y=~s/[e|E]/\*10\^/; + $y=~s/\+//; + return (<\n". + "\n"; +} + +# +# Initialize a new point coordinate variable at set a listener on it +# +sub new_point_coordinate { + my ($id,$variable,$x,$y,$fixed)=@_; + if (defined($Apache::functionplotresponse::previous{&field_name($id,$variable,'x')})) { + $x=$Apache::functionplotresponse::previous{&field_name($id,$variable,'x')}; + } + if (defined($Apache::functionplotresponse::previous{&field_name($id,$variable,'y')})) { + $y=$Apache::functionplotresponse::previous{&field_name($id,$variable,'y')}; + } + &generate_input_field($id,$variable,$x,$y); + return &set_point_coordinate($id,$variable,$x,$y,$fixed).&update_register($id,$variable); +} + +# +# Initialize a new slope coordinate variable at set a listener on it +# +sub new_slope_coordinate { + my ($id,$variable,$x,$y,$pointname,$xp,$yp,$xmin,$xmax,$ymin,$ymax,$fixed)=@_; +# +# $variable: name of the slope point +# $x, $y: coordinates of the slope point +# $pointname: name of the associated point point +# $xp $yp: coordinates of the point point +# + if (defined($Apache::functionplotresponse::previous{&field_name($id,$variable,'x')})) { + $x=$Apache::functionplotresponse::previous{&field_name($id,$variable,'x')}; + } + if (defined($Apache::functionplotresponse::previous{&field_name($id,$variable,'y')})) { + $y=$Apache::functionplotresponse::previous{&field_name($id,$variable,'y')}; + } + if (defined($Apache::functionplotresponse::previous{&field_name($id,$pointname,'x')})) { + $xp=$Apache::functionplotresponse::previous{&field_name($id,$pointname,'x')}; + } + if (defined($Apache::functionplotresponse::previous{&field_name($id,$pointname,'y')})) { + $yp=$Apache::functionplotresponse::previous{&field_name($id,$pointname,'y')}; + } + + &generate_input_field($id,$variable,$x,$y); + my $xrel=$x-$xp; + my $yrel=$y-$yp; + return &set_slope_coordinate($id,$variable,$xrel,$yrel,$xmin,$xmax,$ymin,$ymax,$pointname,$fixed).&update_register($id,$variable); +} + +# +# This registers the init-function call for ggbOnInit, which LON-CAPA will place at +# It then starts the right headers +# sub start_init_script { my ($id)=@_; - $Apache::functionplotresponse::callscripts.="if (param=='applet_$id') { ggbInit_$id(); }\n"; +# Add id to the list of ggbInit_$id functions that need to be called + push(@Apache::functionplotresponse::callscripts,$id); +# ... and open this function return (< // 0)) { + $return.=(<0)) { + $return.=(<8) { $order=8; } + $Apache::functionplotresponse::counter++; + my $label='CSpline'.$Apache::functionplotresponse::counter; + my $output='document.ggbApplet_'.$id.'.evalCommand("'.$label.'=Spline'.$order.'['; + for (my $i=0;$i<=$#points;$i+=4) { + $output.="($points[$i],$points[$i+1]),($points[$i+2],$points[$i+3]),"; + } + $output=~s/\,$//; + $output.=']");'."\n"; + for (my $i=2; $i<2*$order; $i+=2) { + $output.='document.ggbApplet_'.$id.'.setColor("'.$label.'_'.($i>=10?'{':'').$i.($i>=10?'}':'').'",0,170,0);'."\n"; + } + for (my $i=1; $i<2*$order; $i+=2) { + $output.='document.ggbApplet_'.$id.'.setVisible("'.$label.'_'.($i>=10?'{':'').$i.($i>=10?'}':'').'",false);'."\n"; + } + + return $output; +} + +# +# Subroutine that generates code for spline $label based on stored information +# + +sub generate_spline { + my ($id,$label,$xmin,$xmax,$ymin,$ymax,$fixed)=@_; + my $result=''; + my $order=$Apache::functionplotresponse::splineorder{$label}; + my $x=$Apache::functionplotresponse::splineinitx{$label}; + my $y=$Apache::functionplotresponse::splineinity{$label}; + my $sx=$Apache::functionplotresponse::splinescalex{$label}; + my $sy=$Apache::functionplotresponse::splinescaley{$label}; + my @coords=(); + foreach my $i (1..$order) { + $result.=&new_point_coordinate($id,$label.'P'.$i,$x,$y,$fixed); + my $xp=$x; + $x+=$sx/(2.*($order-1)); + push(@coords,$label.'P'.$i); + $result.=&new_slope_coordinate($id,$label.'S'.$i,$x,$y+$sy,$label.'P'.$i,$xp,$y,$xmin,$xmax,$ymin,$ymax,$fixed); + $x+=$sx/(2.*($order-1)); + push(@coords,$label.'S'.$i); + } + $result.='document.ggbApplet_'.$id.'.evalCommand("Spline'.$order.'['.join(',',@coords).']");'."\n"; + return $result; +} + +# +# Object +# + +sub start_plotobject { + my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_; + my $result=''; + my $internalid = $Apache::inputtags::part.'_'.$Apache::inputtags::response[-1]; + my $x=&Apache::lonxml::get_param('x',$parstack,$safeeval); + my $y=&Apache::lonxml::get_param('y',$parstack,$safeeval); + my $label=&Apache::lonxml::get_param('label',$parstack,$safeeval); + $label=~s/\W//gs; + $label=ucfirst($label); + unless ($label) { $label="NewObject"; } + if ($target eq 'web') { + my ($xmin,$xmax,$ymin,$ymax)=&boundaries($parstack,$safeeval,-3); + unless (defined($x)) { $x=$xmin; } + unless (defined($y)) { $y=$ymin; } + $result.=&plotobject_script($internalid,$label,$x,$y); + } elsif ($target eq 'edit') { + $result=&Apache::edit::tag_start($target,$token,'Plot Object'). + &Apache::edit::text_arg('Label on Plot:','label', + $token,'16'). + &Apache::edit::text_arg('x:','x', + $token,'8'). + &Apache::edit::text_arg('y:','y', + $token,'8'). + &Apache::edit::end_row(); + } elsif ($target eq 'modified') { + $env{'form.'.&Apache::edit::html_element_name('label')}=ucfirst($env{'form.'.&Apache::edit::html_element_name('label')}); + my $constructtag=&Apache::edit::get_new_args($token,$parstack,$safeeval,'label','x','y'); + if ($constructtag) { $result=&Apache::edit::rebuild_tag($token); } + } + return $result; +} + +sub end_plotobject { + my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_; + my $result=''; + if ($target eq 'edit') { + $result=&Apache::edit::end_table(); + } + return $result; +} + +# +# Vector +# + +sub start_plotvector { + my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_; + my $result=''; + my $internalid = $Apache::inputtags::part.'_'.$Apache::inputtags::response[-1]; + my $tailx=&Apache::lonxml::get_param('tailx',$parstack,$safeeval); + my $taily=&Apache::lonxml::get_param('taily',$parstack,$safeeval); + my $tipx=&Apache::lonxml::get_param('tipx',$parstack,$safeeval); + my $tipy=&Apache::lonxml::get_param('tipy',$parstack,$safeeval); + + my $label=&Apache::lonxml::get_param('label',$parstack,$safeeval); + $label=~s/\W//gs; + $label=ucfirst($label); + unless ($label) { $label="NewVector"; } + if ($target eq 'web') { + my ($xmin,$xmax,$ymin,$ymax)=&boundaries($parstack,$safeeval,-3); + unless (defined($tailx)) { $tailx=$xmin; } + unless (defined($taily)) { $taily=$ymin; } + unless (defined($tipx)) { $tipx=$xmin; } + unless (defined($tipy)) { $tipy=$ymin; } + my $fixed=0; + if ((&Apache::response::show_answer()) || (&Apache::response::check_status()>=2)) { $fixed=1; } + $result.=&plotvector_script($internalid,$label,$tailx,$taily,$tipx,$tipy,$xmin,$xmax,$fixed); + } elsif ($target eq 'edit') { + $result=&Apache::edit::tag_start($target,$token,'Plot Vector'). + &Apache::edit::text_arg('Label on Plot:','label', + $token,'16'). + &Apache::edit::text_arg('Tail x:','tailx', + $token,'8'). + &Apache::edit::text_arg('Tail y:','taily', + $token,'8'). + &Apache::edit::text_arg('Tip x:','tipx', + $token,'8'). + &Apache::edit::text_arg('Tip y:','tipy', + $token,'8'). + + &Apache::edit::end_row(); + } elsif ($target eq 'modified') { + $env{'form.'.&Apache::edit::html_element_name('label')}=ucfirst($env{'form.'.&Apache::edit::html_element_name('label')}); + my $constructtag=&Apache::edit::get_new_args($token,$parstack,$safeeval,'label','tailx','taily','tipx','tipy'); + if ($constructtag) { $result=&Apache::edit::rebuild_tag($token); } + } + return $result; +} + +sub end_plotvector { + my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_; + my $result=''; + if ($target eq 'edit') { + $result=&Apache::edit::end_table(); + } + return $result; +} + + +# +# Vector sum - have GeoGebra draw a sum of specified vectors to help students draw +# + +sub start_drawvectorsum { + my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_; + my $result=''; + my $internalid = $Apache::inputtags::part.'_'.$Apache::inputtags::response[-1]; + my $tailx=&Apache::lonxml::get_param('tailx',$parstack,$safeeval); + my $taily=&Apache::lonxml::get_param('taily',$parstack,$safeeval); + my $vectorlist=&Apache::lonxml::get_param('vectorlist',$parstack,$safeeval); + my $label=&Apache::lonxml::get_param('label',$parstack,$safeeval); + $label=~s/\W//gs; + $label=ucfirst($label); + unless ($label) { $label="NewVector"; } + if ($target eq 'web') { + my ($xmin,$xmax,$ymin,$ymax)=&boundaries($parstack,$safeeval,-3); + unless (defined($tailx)) { $tailx=$xmin; } + unless (defined($taily)) { $taily=$ymin; } + unless (defined($vectorlist)) { $vectorlist=''; } + my @vectors=split(/\,/,$vectorlist); + if ($#vectors>0) { + my @sumx=(); + my @sumy=(); + foreach my $thisvector (@vectors) { + $thisvector=~s/\W//gs; + $thisvector=ucfirst($thisvector); + unless ($thisvector) { next; } + my $vectorx=$thisvector.'X'; + my $vectory=$thisvector.'Y'; + $result.=(<'. + &Apache::edit::text_arg('Vector List:','vectorlist', + $token,'40'). + &Apache::edit::end_row(); + } elsif ($target eq 'modified') { + $env{'form.'.&Apache::edit::html_element_name('label')}=ucfirst($env{'form.'.&Apache::edit::html_element_name('label')}); + my $constructtag=&Apache::edit::get_new_args($token,$parstack,$safeeval,'label','tailx','taily','vectorlist'); + if ($constructtag) { $result=&Apache::edit::rebuild_tag($token); } + } + return $result; +} + + +sub end_drawvectorsum { + my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_; + my $result=''; + if ($target eq 'edit') { + $result=&Apache::edit::end_table(); + } + return $result; +} + + + +# +# +# +sub start_backgroundplot { + my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_; + my $result=''; + my $internalid = $Apache::inputtags::part.'_'.$Apache::inputtags::response[-1]; + my $function=&Apache::lonxml::get_param('function',$parstack,$safeeval); + my $xinitial=&Apache::lonxml::get_param('xinitial',$parstack,$safeeval); + my $xfinal=&Apache::lonxml::get_param('xfinal',$parstack,$safeeval); + my $label=&Apache::lonxml::get_param('label',$parstack,$safeeval); + my $color=&Apache::lonxml::get_param('color',$parstack,$safeeval); + $color=~s/[^a-fA-F0-9]//gs; + unless (length($color)==6) { $color=''; } + my $fixed=(&Apache::lonxml::get_param('fixed',$parstack,$safeeval)=~/on|true|yes|1/i?1:0); + + unless ($function) { $function="0"; } + if ($target eq 'web') { + my ($xmin,$xmax,$ymin,$ymax)=&boundaries($parstack,$safeeval,-3); + unless (defined($xinitial)) { $xinitial=$xmin; } + unless (defined($xfinal)) { $xfinal=$xmax; } + $result.=&plot_script($internalid,$function,$fixed,$label,$color,$xinitial,$xfinal); + } elsif ($target eq 'edit') { + $result=&Apache::edit::tag_start($target,$token,'Background Function Plot'). + &Apache::edit::text_arg('Function:','function', + $token,'16'). + &Apache::edit::text_arg('Initial x-value (optional):','xinitial', + $token,'8'). + &Apache::edit::text_arg('Final x-value (optional):','xfinal', + $token,'8'). + &Apache::edit::text_arg('Label on Plot:','label', + $token,'8'). + &Apache::edit::text_arg('Color (hex code):','color', + $token,'8'). + &Apache::edit::select_arg('Fixed location:','fixed', + ['yes','no'],$token). + &Apache::edit::end_row(); + } elsif ($target eq 'modified') { + my $constructtag=&Apache::edit::get_new_args($token,$parstack, + $safeeval,'function','label','xinitial','xfinal','color','fixed'); + if ($constructtag) { $result=&Apache::edit::rebuild_tag($token); } + } + return $result; +} + +sub end_backgroundplot { + my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_; + my $result=''; + if ($target eq 'edit') { + $result=&Apache::edit::end_table(); + } + return $result; +} + +# +# +# +sub start_functionplotrule { + my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_; + my $result=''; + my $label=&Apache::lonxml::get_param('index',$parstack,$safeeval); + $Apache::functionplotresponse::counter++; + if ($label=~/\W/) { + &Apache::lonxml::warning(&mt('Rule indices should only contain alphanumeric characters.')); + } + $label=~s/\W//gs; + unless ($label) { + $label='R'.$Apache::functionplotresponse::counter; + } else { + $label='R'.$label; + } + + if ($target eq 'grade') { +# Simply remember - in order - for later + my $beginninglabel=&Apache::lonxml::get_param('xinitiallabel',$parstack,$safeeval); + my $endinglabel=&Apache::lonxml::get_param('xfinallabel',$parstack,$safeeval); + if (($beginninglabel=~/\W/) || ($endinglabel=~/W/)) { + &Apache::lonxml::warning(&mt('Rule labels must be alphanumeric.')); + } + $beginninglabel=~s/\W//gs; + $endinglabel=~s/\W//gs; + my $relationship=&Apache::lonxml::get_param('relationship',$parstack,$safeeval); + $relationship=~s/\W//gs; + $relationship=lc($relationship); + unless ($relationship=~/^(eq|ge|gt|le|lt|ne)$/) { + &Apache::lonxml::warning(&mt('Rule relationship not defined.')); + $relationship='eq'; + } + my $derivative=&Apache::lonxml::get_param('derivativeorder',$parstack,$safeeval); + unless (($derivative==-1) || ($derivative==0) || ($derivative==1) || ($derivative==2)) { + &Apache::lonxml::warning(&mt('Rule derivative not defined.')); + $derivative=0; + } + push(@Apache::functionplotresponse::functionplotrules,join(':',( + $label, + $derivative, + &Apache::lonxml::get_param('xinitial',$parstack,$safeeval), + $beginninglabel, + &Apache::lonxml::get_param('xfinal',$parstack,$safeeval), + $endinglabel, + &Apache::lonxml::get_param('minimumlength',$parstack,$safeeval), + &Apache::lonxml::get_param('maximumlength',$parstack,$safeeval), + $relationship, + &Apache::lonxml::get_param('value',$parstack,$safeeval), + &Apache::lonxml::get_param('percenterror',$parstack,$safeeval) + ))); + } elsif ($target eq 'edit') { + $result=&Apache::edit::tag_start($target,$token,'Function Plot Graph Rule'). + &Apache::edit::text_arg('Index/Name:','index', + $token,'10').' '. + &Apache::edit::select_arg(&mt('Function:'),'derivativeorder', + [['0','Function itself'], + ['1','First derivative'], + ['2','Second derivative'], + ['-1','Integral']],$token).'
'. + &Apache::edit::text_arg('Initial x-value:','xinitial', + $token,'8'). + &Apache::edit::select_or_text_arg('Initial x-value label:','xinitiallabel', + [['start','Start of Plot'], + ['end','End of Plot']],$token,'8').'
'. + + &Apache::edit::text_arg('Final x-value (optional):','xfinal', + $token,'8'). + &Apache::edit::select_or_text_arg('Final x-value label (optional):','xfinallabel', + [['end','End of Plot']],$token,'8').'
'. + &Apache::edit::text_arg('Minimum length for range (optional):','minimumlength', + $token,'8'). + &Apache::edit::text_arg('Maximum length for range (optional):','maximumlength', + $token,'8').'
'. + &Apache::edit::select_or_text_arg(&mt('Relationship:'),'relationship', + [['eq','equal'], + ['ne','not equal'], + ['ge','greater than or equal'], + ['gt','greater than'], + ['lt','less than'], + ['le','less than or equal']],$token). + $result.= &Apache::edit::select_or_text_arg('Value:','value', + [['undef','not defined']],$token,'30'). + &Apache::edit::text_arg('Percent error:','percenterror', + $token,'8'). + &Apache::edit::end_row(); + } elsif ($target eq 'modified') { + if (($env{'form.'.&Apache::edit::html_element_name('xinitial')} ne '') && ($env{'form.'.&Apache::edit::html_element_name('xinitiallabel')} eq 'start')) { + $env{'form.'.&Apache::edit::html_element_name('xinitiallabel')}=''; + } + if (($env{'form.'.&Apache::edit::html_element_name('xfinal')} ne '') && ($env{'form.'.&Apache::edit::html_element_name('xfinallabel')} eq 'end')) { + $env{'form.'.&Apache::edit::html_element_name('xfinallabel')}=''; + } + my $constructtag=&Apache::edit::get_new_args($token,$parstack, + $safeeval,'index','derivativeorder', + 'xinitial','xinitiallabel','xfinal','xfinallabel', + 'minimumlength','maximumlength', + 'relationship','value','percenterror'); + if ($constructtag) { $result=&Apache::edit::rebuild_tag($token); } + } + return $result; +} + +sub end_functionplotrule { + my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_; + my $result=''; + if ($target eq 'edit') { + $result=&Apache::edit::end_table(); + } + return $result; +} + + +# +# +# +sub start_functionplotvectorrule { + my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_; + my $result=''; + my $label=&Apache::lonxml::get_param('index',$parstack,$safeeval); + $Apache::functionplotresponse::counter++; + if ($label=~/\W/) { + &Apache::lonxml::warning(&mt('Rule indices should only contain alphanumeric characters.')); + } + $label=~s/\W//gs; + unless ($label) { + $label='R'.$Apache::functionplotresponse::counter; + } else { + $label='R'.$label; + } + + if ($target eq 'grade') { +# Simply remember - in order - for later + + my $id=$Apache::inputtags::response[-1]; + my $partid=$Apache::inputtags::part; + my $internalid = $partid.'_'.$id; + + my $vector=&Apache::lonxml::get_param('vector',$parstack,$safeeval); + $vector=~s/\W//gs; + $vector=ucfirst($vector); + + push(@Apache::functionplotresponse::functionplotvectorrules,join(':',( + $label, + 'vector', + $internalid, + $vector, + &Apache::lonxml::get_param('attachpoint',$parstack,$safeeval), + &Apache::lonxml::get_param('notattachpoint',$parstack,$safeeval), + &Apache::lonxml::get_param('tailpoint',$parstack,$safeeval), + &Apache::lonxml::get_param('tippoint',$parstack,$safeeval), + &Apache::lonxml::get_param('nottailpoint',$parstack,$safeeval), + &Apache::lonxml::get_param('nottippoint',$parstack,$safeeval), + &Apache::lonxml::get_param('length',$parstack,$safeeval), + &Apache::lonxml::get_param('angle',$parstack,$safeeval), + &Apache::lonxml::get_param('lengtherror',$parstack,$safeeval), + &Apache::lonxml::get_param('angleerror',$parstack,$safeeval), + ))); + } elsif ($target eq 'edit') { + $result=&Apache::edit::tag_start($target,$token,'Function Plot Vector Rule'). + &Apache::edit::text_arg('Index/Name:','index', + $token,'10').' '. + &Apache::edit::text_arg('Vector:','vector', + $token,'16').'
'. + &Apache::edit::text_arg('Attached to object:','attachpoint', + $token,'16'). + &Apache::edit::text_arg('Not attached to object:','notattachpoint', + $token,'16').'
'. + &Apache::edit::text_arg('Tail attached to object:','tailpoint', + $token,'16'). + &Apache::edit::text_arg('Tip attached to object:','tippoint', + $token,'16'). + &Apache::edit::text_arg('Tail not attached to object:','nottailpoint', + $token,'16'). + &Apache::edit::text_arg('Tip not attached to object:','nottippoint', + $token,'16').'
'. + &Apache::edit::text_arg('Length:','length', + $token,'30'). + &Apache::edit::text_arg('Absolute error length:','lengtherror', + $token,'8').'
'. + &Apache::edit::text_arg('Angle:','angle', + $token,'30'). + &Apache::edit::text_arg('Absolute error angle:','angleerror', + $token,'8'). + &Apache::edit::end_row(); + } elsif ($target eq 'modified') { + $env{'form.'.&Apache::edit::html_element_name('vector')}=ucfirst($env{'form.'.&Apache::edit::html_element_name('vector')}); + my $constructtag=&Apache::edit::get_new_args($token,$parstack, + $safeeval,'index','vector','attachpoint','notattachpoint', + 'tailpoint','tippoint','nottailpoint','nottipoint', + 'length','angle', + 'lengtherror','angleerror'); + if ($constructtag) { $result=&Apache::edit::rebuild_tag($token); } + } + return $result; +} + +sub end_functionplotvectorrule { + my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_; + my $result=''; + if ($target eq 'edit') { + $result=&Apache::edit::end_table(); + } + return $result; +} + +# +# +# +sub start_functionplotvectorsumrule { + my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_; + my $result=''; + my $label=&Apache::lonxml::get_param('index',$parstack,$safeeval); + $Apache::functionplotresponse::counter++; + if ($label=~/\W/) { + &Apache::lonxml::warning(&mt('Rule indices should only contain alphanumeric characters.')); + } + $label=~s/\W//gs; + unless ($label) { + $label='R'.$Apache::functionplotresponse::counter; + } else { + $label='R'.$label; + } + if ($target eq 'grade') { +# Simply remember - in order - for later + my $id=$Apache::inputtags::response[-1]; + my $partid=$Apache::inputtags::part; + my $internalid = $partid.'_'.$id; + my $vectors=&Apache::lonxml::get_param('vectors',$parstack,$safeeval); + push(@Apache::functionplotresponse::functionplotvectorrules,join(':',( + $label, + 'sum', + $internalid, + $vectors, + &Apache::lonxml::get_param('length',$parstack,$safeeval), + &Apache::lonxml::get_param('angle',$parstack,$safeeval), + &Apache::lonxml::get_param('lengtherror',$parstack,$safeeval), + &Apache::lonxml::get_param('angleerror',$parstack,$safeeval), + ))); + } elsif ($target eq 'edit') { + $result=&Apache::edit::tag_start($target,$token,'Function Plot Vector Sum Rule'). + &Apache::edit::text_arg('Index/Name:','index', + $token,'10').' '. + &Apache::edit::text_arg('Comma-separated list of vectors:','vectors', + $token,'30').'
'. + &Apache::edit::text_arg('Sum vector length:','length', + $token,'30'). + &Apache::edit::text_arg('Absolute error length:','lengtherror', + $token,'8').'
'. + &Apache::edit::text_arg('Sum vector angle:','angle', + $token,'30'). + &Apache::edit::text_arg('Absolute error angle:','angleerror', + $token,'8'). + &Apache::edit::end_row(); + } elsif ($target eq 'modified') { + my $constructtag=&Apache::edit::get_new_args($token,$parstack, + $safeeval,'index','vectors', + 'length','angle', + 'lengtherror','angleerror'); + if ($constructtag) { $result=&Apache::edit::rebuild_tag($token); } + } + return $result; +} + +sub end_functionplotvectorsumrule { + my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_; + my $result=''; + if ($target eq 'edit') { + $result=&Apache::edit::end_table(); + } + return $result; +} + +# +# +# +sub start_functionplotcustomrule { + my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_; + my $result=''; + my $label=&Apache::lonxml::get_param('index',$parstack,$safeeval); + $Apache::functionplotresponse::counter++; + if ($label=~/\W/) { + &Apache::lonxml::warning(&mt('Rule indices should only contain alphanumeric characters.')); + } + $label=~s/\W//gs; + unless ($label) { + $label='R'.$Apache::functionplotresponse::counter; + } else { + $label='R'.$label; + } + &Apache::lonxml::register('Apache::response',('answer')); + if ($target eq 'edit') { + $result=&Apache::edit::tag_start($target,$token,'Function Plot Custom Rule'). + &Apache::edit::text_arg('Index/Name:','index',$token,'10'). + &Apache::edit::end_row(); + } elsif ($target eq 'modified') { + my $constructtag=&Apache::edit::get_new_args($token,$parstack,$safeeval,'index'); + if ($constructtag) { $result=&Apache::edit::rebuild_tag($token); } + } + return $result; +} + +sub end_functionplotcustomrule { + my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_; + my $result=''; + if ($target eq 'edit') { + $result=&Apache::edit::end_table(); + } elsif ($target eq 'grade') { +# Simply remember - in order - for later + my $label=&Apache::lonxml::get_param('index',$parstack,$safeeval); + $Apache::functionplotresponse::counter++; + if ($label=~/\W/) { + &Apache::lonxml::warning(&mt('Rule indices should only contain alphanumeric characters.')); + } + $label=~s/\W//gs; + unless ($label) { + $label='R'.$Apache::functionplotresponse::counter; + } else { + $label='R'.$label; + } + push(@Apache::functionplotresponse::functionplotvectorrules,join(':',( + $label, + 'custom', + &escape($Apache::response::custom_answer[-1]) + ))); + } + &Apache::lonxml::deregister('Apache::response',('answer')); + return $result; +} + + + +# +# +# +# Unfortunately, GeoGebra seems to want all splines after everything else, so we need to store them +# +sub start_spline { + my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_; + my $result=''; + if ($target eq 'web') { + my $label=&Apache::lonxml::get_param('index',$parstack,$safeeval); + $Apache::functionplotresponse::counter++; + if ($label=~/\W/) { + &Apache::lonxml::warning(&mt('Spline indices should only contain alphanumeric characters.')); + } + $label=~s/\W//gs; + unless ($label) { + $label='S'.$Apache::functionplotresponse::counter; + } else { + $label='S'.$label; + } + if ($Apache::functionplotresponse::splineorder{$label}) { + &Apache::lonxml::error(&mt('Spline indices must be unique.')); + } + + my $order=&Apache::lonxml::get_param('order',$parstack,$safeeval); + if ($order<2) { $order=2; } + if ($order>8) { $order=8; } + $Apache::functionplotresponse::splineorder{$label}=$order; + + my $x=&Apache::lonxml::get_param('initx',$parstack,$safeeval); + unless ($x) { $x=0; } + $Apache::functionplotresponse::splineinitx{$label}=$x; + + my $y=&Apache::lonxml::get_param('inity',$parstack,$safeeval); + unless ($y) { $y=0; } + $Apache::functionplotresponse::splineinity{$label}=$y; + + my $sx=&Apache::lonxml::get_param('scalex',$parstack,$safeeval); + unless ($sx) { $sx=$order; } + $Apache::functionplotresponse::splinescalex{$label}=$sx; + + my $sy=&Apache::lonxml::get_param('scaley',$parstack,$safeeval); + unless ($sy) { $sy=2; } + $Apache::functionplotresponse::splinescaley{$label}=$sy; + } elsif ($target eq 'edit') { + $result=&Apache::edit::tag_start($target,$token,'Spline'). + &Apache::edit::text_arg('Index:','index', + $token,'4').' '. + &Apache::edit::select_arg('Order:','order', + ['2','3','4','5','6','7','8'],$token).' '. + &Apache::edit::text_arg('Initial x-value:','initx', + $token,'4').' '. + &Apache::edit::text_arg('Initial y-value:','inity', + $token,'4').' '. + &Apache::edit::text_arg('Scale x:','scalex', + $token,'4').' '. + &Apache::edit::text_arg('Scale y:','scaley', + $token,'4'). + &Apache::edit::end_row(); + } elsif ($target eq 'modified') { + my $constructtag=&Apache::edit::get_new_args($token,$parstack, + $safeeval,'index','order','initx','inity', + 'scalex','scaley'); + if ($constructtag) { $result=&Apache::edit::rebuild_tag($token); } + } + return $result; +} + +sub end_spline { + my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_; + my $result=''; + if ($target eq 'edit') { + $result=&Apache::edit::end_table(); + } + return $result; +} + sub end_init_script { return (<$xmin) { return 'no_func'; } +# Run over all splines in response + foreach my $label (split(/\,/,$env{"form.HWVAL_AllSplines_$id"})) { + my $xiold=-1; +# Run over all points in spline + for (my $i=1; $i<$env{"form.HWVAL_SplineOrder_".$id."_".$label}; $i++) { + my $ni=$i+1; + my @xparms=($env{'form.HWVAL_'.$id.'_'.$label.'P'.$i.'_x'}, + $env{'form.HWVAL_'.$id.'_'.$label.'S'.$i.'_x'}, + $env{'form.HWVAL_'.$id.'_'.$label.'P'.$ni.'_x'}, + $env{'form.HWVAL_'.$id.'_'.$label.'S'.$ni.'_x'}); + my @yparms=($env{'form.HWVAL_'.$id.'_'.$label.'P'.$i.'_y'}, + $env{'form.HWVAL_'.$id.'_'.$label.'S'.$i.'_y'}, + $env{'form.HWVAL_'.$id.'_'.$label.'P'.$ni.'_y'}, + $env{'form.HWVAL_'.$id.'_'.$label.'S'.$ni.'_y'}); +# Run in small steps over spline parameter + for (my $t=0; $t<=1; $t+=0.0001) { + my $xreal=&cubic_hermite($t,@xparms); + my $xi=&array_index($xmin,$xmax,$xreal); + if ($xi<$xiold) { return 'no_func'; } + if (($xi>$xiold) && ($xi>=0) && ($xi<=400)) { + $xiold=$xi; + $Apache::functionplotresponse::actualxval[$xi]=$xreal; +# Function value + my $funcval=&cubic_hermite($t,@yparms); + +# Do we already have a value for this point, and is it different from the new one? + if ((defined($Apache::functionplotresponse::func[$xi])) && + (abs($Apache::functionplotresponse::func[$xi]-$funcval)>($ymax-$ymin)/100.)) { + return 'no_func'; + } +# Okay, remember the new point + $Apache::functionplotresponse::func[$xi]=$funcval; + + if (defined($funcval)) { + if ($xi<$Apache::functionplotresponse::functionplotrulelabels{'start'}) { + $Apache::functionplotresponse::functionplotrulelabels{'start'}=$xi; + } + if ($xi>$Apache::functionplotresponse::functionplotrulelabels{'end'}) { + $Apache::functionplotresponse::functionplotrulelabels{'end'}=$xi; + } + } +# Chain rule +# dy/dx=dy/dt/(dx/dt) + my $dxdt=&ddt_cubic_hermite($t,@xparms); + if ($dxdt) { + $Apache::functionplotresponse::dfuncdx[$xi]=&ddt_cubic_hermite($t,@yparms)/$dxdt; +# Second derivative + $Apache::functionplotresponse::d2funcdx2[$xi]= + ($dxdt*&d2dt2_cubic_hermite($t,@yparms)-&ddt_cubic_hermite($t,@yparms)*&d2dt2_cubic_hermite($t,@xparms))/ + ($dxdt*$dxdt*$dxdt); + } + } + } + } + } +} + +# +# Implementation of +# + sub start_functionplotresponse { my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_; my $result=''; - my $internalid = $Apache::inputtags::part.'_'.&Apache::response::start_response($parstack,$safeeval); - my $xmin=&Apache::lonxml::get_param('xmin',$parstack,$safeeval); - my $xmax=&Apache::lonxml::get_param('xmax',$parstack,$safeeval); - my $ymin=&Apache::lonxml::get_param('ymin',$parstack,$safeeval); - my $ymax=&Apache::lonxml::get_param('ymax',$parstack,$safeeval); - my $xaxisvisible=&Apache::lonxml::get_param('xaxisvisible',$parstack,$safeeval); - my $yaxisvisible=&Apache::lonxml::get_param('yaxisvisible',$parstack,$safeeval); - my $gridvisible=&Apache::lonxml::get_param('gridvisible',$parstack,$safeeval); +# To remember the splines - somehow, they need to come last + undef %Apache::functionplotresponse::splineorder; + undef %Apache::functionplotresponse::splineinitx; + undef %Apache::functionplotresponse::splineinity; + undef %Apache::functionplotresponse::splinescalex; + undef %Apache::functionplotresponse::splinescaley; +# Remember input fields, etc + undef %Apache::functionplotresponse::previous; + $Apache::functionplotresponse::inputfields=''; + $Apache::functionplotresponse::counter=0; +# Remember rules + undef @Apache::functionplotresponse::functionplotrules; + undef @Apache::functionplotresponse::functionplotvectorrules; +# Remember failed rules + if ($target eq 'grade') { + undef @Apache::functionplotresponse::failedrules; + } +# Delete previous awards + undef $Apache::functionplotresponse::awarddetail; +# Part and ID + my $partid=$Apache::inputtags::part; + my $id=&Apache::response::start_response($parstack,$safeeval); +# Internal ID to mark the applet and its coordinates + my $internalid = $partid.'_'.$id; +# Previous answer + &decode_previous_answer($Apache::lonhomework::history{"resource.$partid.$id.submission"}); +# Parameters of + my ($xmin,$xmax,$ymin,$ymax)=&boundaries($parstack,$safeeval); + my $xaxisvisible=(&Apache::lonxml::get_param('xaxisvisible',$parstack,$safeeval)=~/on|true|yes|1/i?'true':'false'); + my $yaxisvisible=(&Apache::lonxml::get_param('yaxisvisible',$parstack,$safeeval)=~/on|true|yes|1/i?'true':'false'); + my $gridvisible=(&Apache::lonxml::get_param('gridvisible',$parstack,$safeeval)=~/on|true|yes|1/i?'true':'false'); + my $xlabel=&Apache::lonxml::get_param('xlabel',$parstack,$safeeval); + my $ylabel=&Apache::lonxml::get_param('ylabel',$parstack,$safeeval); + if ($target eq 'edit') { + $result.=&Apache::edit::start_table($token) + .''.&mt('Function Plot Question').'' + .''.&mt('Delete?').' ' + .&Apache::edit::deletelist($target,$token).'   ' + .&Apache::edit::insertlist($target,$token).'   ' + .&Apache::loncommon::help_open_topic('Function_Plot_Response_Question','Function Plot Responses') + .'' + ." " + .&Apache::edit::end_row() + .&Apache::edit::start_spanning_row() + ."\n"; + $result.=&Apache::edit::text_arg('Width (pixels):','width', + $token,'6').' '. + &Apache::edit::text_arg('Height (pixels):','height', + $token,'6').'
'. + &Apache::edit::text_arg('Label x-axis:','xlabel', + $token,'6').' '. + &Apache::edit::text_arg('Minimum x-value:','xmin', + $token,'4').' '. + &Apache::edit::text_arg('Maximum x-value:','xmax', + $token,'4').' '. + &Apache::edit::select_arg('x-axis visible:','xaxisvisible', + ['yes','no'],$token).'
'. + &Apache::edit::text_arg('Label y-axis:','ylabel', + $token,'6').' '. + &Apache::edit::text_arg('Minimum y-value:','ymin', + $token,'4').' '. + &Apache::edit::text_arg('Maximum y-value:','ymax', + $token,'4').' '. + &Apache::edit::select_arg('y-axis visible:','yaxisvisible', + ['yes','no'],$token).'
'. + &Apache::edit::select_arg('Grid visible:','gridvisible', + ['yes','no'],$token).'
'. + &Apache::edit::text_arg('Background plot(s) for answer (function(x):xmin:xmax,function(x):xmin:xmax,x1:y1:sx1:sy1:x2:y2:sx2:sy2,...):', + 'answerdisplay',$token,'50'). + &Apache::edit::end_row().&Apache::edit::start_spanning_row(); + } elsif ($target eq 'modified') { + my $constructtag=&Apache::edit::get_new_args($token,$parstack, + $safeeval,'width','height','xlabel','xmin','xmax','ylabel','ymin','ymax', + 'xaxisvisible','yaxisvisible','gridvisible','answerdisplay'); + if ($constructtag) { $result = &Apache::edit::rebuild_tag($token); } - if ($target eq 'web') { - $result.=&start_init_script($internalid); + } elsif ($target eq 'meta') { + $result=&Apache::response::meta_package_write('functionplotresponse'); + } elsif (($target eq 'answer') && + ($env{'form.answer_output_mode'} ne 'tex') && + ($Apache::lonhomework::viewgrades == 'F')) { + my (undef,undef,$udom,$uname)=&Apache::lonnet::whichuser(); + $uname =~s/\W//g; + $udom =~s/\W//g; + my $function_name = + join('_','LONCAPA_scriptvars',$uname,$udom, + $env{'form.counter'},$Apache::lonxml::curdepth); + &Apache::lonxml::add_script_result( + &Apache::loncommon::modal_adhoc_window($function_name,700,500, + '
'.$Apache::functionplotresponse::ruleslog.'
', + &mt('Rules Log'))."
"); } return $result; } +sub compare_rel { + my ($relationship,$value,$realval,$tol)=@_; +# is the real value undefined? + unless (defined($realval)) { +# the real value is not defined + if ($relationship eq 'eq') { + if ($value eq 'undef') { + return 1; + } else { + return 0; + } + } elsif ($relationship eq 'ne') { + if ($value eq 'undef') { + return 0; + } else { + return 1; + } + } else { + return 0; + } + } + +# is the expected value undefined? + if ($value eq 'undef') { +# but by now we know that the real value is defined + return 0; + } + +# both are defined. + if ($relationship eq 'gt') { + return ($realval>$value); + } elsif ($relationship eq 'ge') { + return ($realval>$value-$tol); + } elsif ($relationship eq 'lt') { + return ($realval<$value); + } elsif ($relationship eq 'le') { + return ($realval<$value+$tol); + } elsif ($relationship eq 'ne') { + return (abs($value-$realval)>$tol); + } else { + return (abs($value-$realval)<$tol); + } + return 0; +} + +sub addlog { + my ($text)=@_; + $text=~s/\'/\\\'/g; + $Apache::functionplotresponse::ruleslog.=$text.'
'; +} + +sub actualval { + my ($i,$xmin,$xmax)=@_; + return $xmin+$i/400.*($xmax-$xmin); +} + +sub fpr_val { + my ($arg)=@_; + return &actualval($Apache::functionplotresponse::functionplotrulelabels{$arg}, + $Apache::functionplotresponse::fpr_xmin, + $Apache::functionplotresponse::fpr_xmax); +} + +sub fpr_f { + my ($arg)=@_; + return $Apache::functionplotresponse::func[&array_index($Apache::functionplotresponse::fpr_xmin, + $Apache::functionplotresponse::fpr_xmax, + $arg)]; +} + +sub fpr_dfdx { + my ($arg)=@_; + return $Apache::functionplotresponse::dfuncdx[&array_index($Apache::functionplotresponse::fpr_xmin, + $Apache::functionplotresponse::fpr_xmax, + $arg)]; +} + +sub fpr_d2fdx2 { + my ($arg)=@_; + return $Apache::functionplotresponse::d2funcdx2[&array_index($Apache::functionplotresponse::fpr_xmin, + $Apache::functionplotresponse::fpr_xmax, + $arg)]; +} + +sub fpr_vectorcoords { + my ($arg)=@_; + $arg=~s/\W//gs; + $arg=ucfirst($arg); + my $id=$Apache::inputtags::response[-1]; + my $partid=$Apache::inputtags::part; + my $internalid = $partid.'_'.$id; + return ($env{'form.HWVAL_'.$internalid.'_'.$arg.'Start_x'}, + $env{'form.HWVAL_'.$internalid.'_'.$arg.'End_x'}, + $env{'form.HWVAL_'.$internalid.'_'.$arg.'Start_y'}, + $env{'form.HWVAL_'.$internalid.'_'.$arg.'End_y'}); +} + +sub fpr_objectcoords { + my ($arg)=@_; + $arg=~s/\W//gs; + $arg=ucfirst($arg); + my $id=$Apache::inputtags::response[-1]; + my $partid=$Apache::inputtags::part; + my $internalid = $partid.'_'.$id; + return ($env{'form.HWVAL_'.$internalid.'_'.$arg.'_x'}, + $env{'form.HWVAL_'.$internalid.'_'.$arg.'_y'}); +} + +sub fpr_vectorlength { + my ($arg)=@_; + my ($xs,$xe,$ys,$ye)=&fpr_vectorcoords($arg); + return sqrt(($xe-$xs)*($xe-$xs)+($ye-$ys)*($ye-$ys)); +} + +sub fpr_vectorangle { + my ($arg)=@_; + my ($xs,$xe,$ys,$ye)=&fpr_vectorcoords($arg); + my $angle=57.2957795*atan2(($ye-$ys),($xe-$xs)); + if ($angle<0) { $angle=360+$angle; } + return $angle; +} + +sub vectorcoords { + my ($id,$label)=@_; + return ($env{'form.HWVAL_'.$id.'_'.$label.'Start_x'}, + $env{'form.HWVAL_'.$id.'_'.$label.'End_x'}, + $env{'form.HWVAL_'.$id.'_'.$label.'Start_y'}, + $env{'form.HWVAL_'.$id.'_'.$label.'End_y'}); +} + +sub objectcoords { + my ($id,$label)=@_; + return ($env{'form.HWVAL_'.$id.'_'.$label.'_x'}, + $env{'form.HWVAL_'.$id.'_'.$label.'_y'}); +} + +sub attached { + my ($id,$vector,$objects,$xmin,$xmax,$ymin,$ymax)=@_; + my ($xs,$xe,$ys,$ye)=&vectorcoords($id,$vector); + my $tolx=($xmax-$xmin)/100.; + my $toly=($ymax-$ymin)/100.; + my $tail=0; + my $tip=0; + foreach my $obj (split(/\s*\,\s*/,$objects)) { + $obj=~s/\W//g; + unless ($obj) { next; } + $obj=ucfirst($obj); + my ($xo,$yo)=&objectcoords($id,$obj); + &addlog("Proximity $vector ($xs,$ys)-($xe,$ye) to $obj ($xo,$yo)"); + if ((abs($xs-$xo)<$tolx) && (abs($ys-$yo)<$toly)) { + $tail=1; + &addlog("Attached tail: $obj"); + } + if ((abs($xe-$xo)<$tolx) && (abs($ye-$yo)<$toly)) { + $tip=1; + &addlog("Attached tip: $obj"); + } + } + &addlog("Result tail:$tail tip:$tip"); + return($tail,$tip); +} + + +sub vectorangle { + my ($x,$y)=@_; + my $angle=57.2957795*atan2($y,$x); + if ($angle<0) { $angle=360+$angle; } + return $angle; +} + +sub vectorlength { + my ($x,$y)=@_; + return sqrt($x*$x+$y*$y); +} + +sub relvector { + my ($xs,$xe,$ys,$ye)=@_; + return ($xe-$xs,$ye-$ys); +} + +sub plotvectorlength { + return &vectorlength(&relvector(&vectorcoords(@_))); +} + +sub plotvectorangle { + return &vectorangle(&relvector(&vectorcoords(@_))); +} + + +# +# Evaluate a functionplotvectorrule +# + +sub functionplotvectorrulecheck { + my ($rule,$xmin,$xmax,$ymin,$ymax,$safeeval)=@_; + &addlog("================="); + my ($label,$type)=split(/\:/,$rule); + if ($type eq 'vector') { + return &vectorcheck($rule,$xmin,$xmax,$ymin,$ymax,$safeeval); + } elsif ($type eq 'sum') { + return &sumcheck($rule,$xmin,$xmax,$ymin,$ymax,$safeeval); + } elsif ($type eq 'custom') { + return &customcheck($rule,$safeeval); + } +} + +sub vectorcheck { + my ($rule,$xmin,$xmax,$ymin,$ymax,$safeeval)=@_; + my ($label,$type,$id,$vector, + $attachpoint,$notattachpoint, + $tailpoint,$tippoint,$nottailpoint,$nottippoint, + $length,$angle,$lengtherror,$angleerror)=split(/\:/,$rule); + &addlog("Vector Rule $label for vector ".$vector); + if ($length ne '') { + &addlog("Checking for length $length with error $lengtherror"); + $length=&Apache::run::run($length,$safeeval); + &addlog("Length evaluated to $length"); + my $thislength=&plotvectorlength($id,$vector); + &addlog("Found length $thislength"); + if (abs($thislength-$length)>$lengtherror) { + &setfailed($label); + return 0; + } + } + if ($angle ne '') { + &addlog("Checking for angle $angle with error $angleerror"); + $angle=&Apache::run::run($angle,$safeeval); + &addlog("Angle evaluated to $angle"); + my $thisangle=&plotvectorangle($id,$vector); + &addlog("Found angle $thisangle"); + my $anglediff=abs($thisangle-$angle); + &addlog("Angle difference: $anglediff"); + if ($anglediff>360.-$anglediff) { + $anglediff=360.-$anglediff; + } + &addlog("Smallest angle difference: $anglediff"); + if ($anglediff>$angleerror) { + &setfailed($label); + return 0; + } + } + if ($attachpoint ne '') { + &addlog("Checking attached: ".$attachpoint); + my ($tail,$tip)=&attached($id,$vector,$attachpoint,$xmin,$xmax,$ymin,$ymax); + unless ($tail || $tip) { + &setfailed($label); + return 0; + } + } + if ($notattachpoint ne '') { + &addlog("Checking not attached: ".$notattachpoint); + my ($tail,$tip)=&attached($id,$vector,$notattachpoint,$xmin,$xmax,$ymin,$ymax); + if ($tail || $tip) { + &setfailed($label); + return 0; + } + } + if ($tailpoint ne '') { + &addlog("Checking tail: ".$tailpoint); + my ($tail,$tip)=&attached($id,$vector,$tailpoint,$xmin,$xmax,$ymin,$ymax); + unless ($tail) { + &setfailed($label); + return 0; + } + } + if ($nottailpoint ne '') { + &addlog("Checking not tail: ".$nottailpoint); + my ($tail,$tip)=&attached($id,$vector,$nottailpoint,$xmin,$xmax,$ymin,$ymax); + if ($tail) { + &setfailed($label); + return 0; + } + } + if ($tippoint ne '') { + &addlog("Checking tip: ".$tippoint); + my ($tail,$tip)=&attached($id,$vector,$tippoint,$xmin,$xmax,$ymin,$ymax); + unless ($tip) { + &setfailed($label); + return 0; + } + } + if ($nottippoint ne '') { + &addlog("Checking not tip: ".$nottippoint); + my ($tail,$tip)=&attached($id,$vector,$nottippoint,$xmin,$xmax,$ymin,$ymax); + if ($tip) { + &setfailed($label); + return 0; + } + } + + &addlog("Rule $label passed."); + return 1; +} + +sub sumcheck { + my ($rule,$xmin,$xmax,$ymin,$ymax,$safeeval)=@_; + my ($label,$type,$id,$vectors,$length,$angle,$lengtherror,$angleerror)=split(/\:/,$rule); + &addlog("Vector Sum Rule $label for vectors ".$vectors); + my $sumx=0; + my $sumy=0; + foreach my $sv (split(/\s*\,\s*/,$vectors)) { + my ($rx,$ry)=&relvector(&vectorcoords($id,$sv)); + $sumx+=$rx; + $sumy+=$ry; + } + &addlog("Sum vector ($sumx,$sumy)"); + if ($length ne '') { + &addlog("Checking length $length with error $lengtherror"); + $length=&Apache::run::run($length,$safeeval); + &addlog("Evaluated to $length"); + my $thislength=&vectorlength($sumx,$sumy); + &addlog("Actual length $thislength"); + if (abs($length-$thislength)>$lengtherror) { + &setfailed($label); + return 0; + } + } + if ($angle ne '') { + &addlog("Checking angle $angle with error $angleerror"); + $angle=&Apache::run::run($angle,$safeeval); + &addlog("Evaluated to $angle"); + my $thisangle=&vectorangle($sumx,$sumy); + &addlog("Actual angle $thisangle"); + my $anglediff=abs($thisangle-$angle); + &addlog("Angle difference: $anglediff"); + if ($anglediff>360.-$anglediff) { + $anglediff=360.-$anglediff; + } + &addlog("Smallest angle difference: $anglediff"); + if ($anglediff>$angleerror) { + &setfailed($label); + return 0; + } + } + &addlog("Rule $label passed."); + return 1; +} + +sub customcheck { + my ($rule,$safeeval)=@_; + my ($label,$type,$prg)=split(/\:/,$rule); + &addlog("Custom Rule ".$label); + my $result=&Apache::run::run(&unescape($prg),$safeeval); + &addlog("Algorithm returned $result"); + unless ($result) { + &setfailed($label); + return 0; + } + &addlog("Rule $label passed."); + return 1; +} + +# +# Evaluate a functionplotrule +# + +sub functionplotrulecheck { + my ($rule,$xmin,$xmax,$ymin,$ymax,$safeeval)=@_; + + my ($label,$derivative,$xinitial,$xinitiallabel,$xfinal,$xfinallabel,$minimumlength,$maximumlength,$relationship,$value,$percent) + =split(/\:/,$rule); + $percent=($percent>0?$percent:5); + &addlog("================="); + &addlog("Rule $label for ".($derivative<0?'integral':('function itself','first derivative','second derivative')[$derivative])." $relationship $value"); +# +# Evaluate the value +# + if (($value=~/\D/) && ($value ne 'undef')) { + $Apache::functionplotresponse::fpr_xmin=$xmin; + $Apache::functionplotresponse::fpr_xmax=$xmax; + $value=&Apache::run::run($value,$safeeval); + &addlog("Value evaluated to $value"); + } + +# +# Minimum and maximum lengths of the interval +# + if ((defined($minimumlength)) || (defined($maximumlength))) { + &addlog("Minimumlength $minimumlength Maximumlength $maximumlength"); + } + my $li=0; + my $lh=400; + +# Special case: the upper boundary was not defined +# and needs to be set to the value where +# the condition is not true anymore => set flag + + my $findupper=0; + if (($xfinal eq '') + && (!defined($Apache::functionplotresponse::functionplotrulelabels{$xfinallabel})) + && ($xfinallabel)) { + $findupper=1; + } + +# if a hard value is set for the boundaries, it overrides the label + if (($xinitial ne '') && ($xinitiallabel ne '') && ($xinitiallabel ne 'start')) { + $li=&array_index($xmin,$xmax,$xinitial); + $Apache::functionplotresponse::functionplotrulelabels{$xinitiallabel}=$li; + } + if (($xfinal ne '') && ($xfinallabel ne '') && ($xfinallabel ne 'end')) { + $lh=&array_index($xmin,$xmax,$xfinal); + $Apache::functionplotresponse::functionplotrulelabels{$xfinallabel}=$lh; + } +# if the label is defined, use it + if (defined($Apache::functionplotresponse::functionplotrulelabels{$xinitiallabel})) { + &addlog("Using lower label $xinitiallabel"); + $li=$Apache::functionplotresponse::functionplotrulelabels{$xinitiallabel}; + } else { + $li=&array_index($xmin,$xmax,$xinitial); + } + unless ($findupper) { + if (defined($Apache::functionplotresponse::functionplotrulelabels{$xfinallabel})) { + &addlog("Using upper label $xfinallabel"); + $lh=$Apache::functionplotresponse::functionplotrulelabels{$xfinallabel}-1; + } else { + $lh=&array_index($xmin,$xmax,$xfinal); + } + } +# Basic sanity checks + if ($li<0) { $li=0; } + if ($lh>400) { $lh=400; } + if (($li>$lh) || (!defined($lh))) { + $lh=$li; + } + + &addlog("Boundaries: x=".&actualval($li,$xmin,$xmax)." (".$Apache::functionplotresponse::actualxval[$li]."; index $li)) to x=". + &actualval($lh,$xmin,$xmax)." (".$Apache::functionplotresponse::actualxval[$lh]."; index $lh))"); + if ($findupper) { + &addlog("Looking for label $xfinallabel"); + } + my $tol=$percent*($ymax-$ymin)/100; + if ($xmax>$xmin) { + if ($derivative==2) { + $tol=4.*$tol/($xmax-$xmin); + } elsif ($derivative==1) { + $tol=2.*$tol/($xmax-$xmin); + } elsif ($derivative==-1) { + $tol=$tol*($xmax-$xmin)/2.; + } + } + my $integral=0; + my $binwidth=($xmax-$xmin)/400.; + if (($derivative<0) && (!$findupper)) { +# definite integral, calculate over whole length + &addlog("Calculating definite integral"); + for (my $i=$li; $i<=$lh; $i++) { + $integral+=$Apache::functionplotresponse::func[$i]*$binwidth; + } + unless (&compare_rel($relationship,$value,$integral,$tol)) { + &addlog("Actual integral ".(defined($integral)?$integral:'undef').", expected $value, tolerance $tol"); + &addlog("Rule $label failed."); + &setfailed($label); + return 0; + } + } else { + for (my $i=$li; $i<=$lh; $i++) { + my $val; + if ($derivative==2) { + $val=$Apache::functionplotresponse::d2funcdx2[$i]; + } elsif ($derivative==1) { + $val=$Apache::functionplotresponse::dfuncdx[$i]; + } elsif ($derivative==-1) { + $integral+=$Apache::functionplotresponse::func[$i]*$binwidth; + $val=$integral; + } else { + $val=$Apache::functionplotresponse::func[$i]; + } + unless (&compare_rel($relationship,$value,$val,$tol)) { + &addlog("Actual value ".(defined($val)?$val:'undef').", expected $value, tolerance $tol"); + &addlog("Condition not fulfilled at x=".&actualval($i,$xmin,$xmax)." (".$Apache::functionplotresponse::actualxval[$i]."; index $i)"); + if (($findupper) && ($i>$li)) { +# Check lengths + unless (&checklength($i,$li,$minimumlength,$maximumlength,$xmin,$xmax,$label)) { return 0; } +# Successfully found a new label, set it + $Apache::functionplotresponse::functionplotrulelabels{$xfinallabel}=$i; + &addlog("Rule $label passed, setting label $xfinallabel"); + return 1; + } else { + &addlog("Rule $label failed."); + &setfailed($label); + return 0; + } + } + } + } +# Corner case where this makes sense: using start or stop as defined labels + unless (&checklength($lh,$li,$minimumlength,$maximumlength,$xmin,$xmax,$label)) { return 0; } + &addlog("Rule $label passed."); + return 1; +} + +# +# check for minimum and maximum lengths +# + +sub checklength { + my ($i,$li,$minimumlength,$maximumlength,$xmin,$xmax,$label)=@_; + unless (($minimumlength) || ($maximumlength)) { return 1; } + my $length=&actualval($i,$xmin,$xmax)-&actualval($li,$xmin,$xmax); + if ($minimumlength) { + if ($length<$minimumlength) { + &addlog("Rule $label failed, actual length $length, minimum length $minimumlength"); + &setfailed($label); + return 0; + } + } + if ($maximumlength) { + if ($length>$maximumlength) { + &addlog("Rule $label failed, actual length $length, maximum length $maximumlength"); + &setfailed($label); + return 0; + } + } + return 1; +} + +sub setfailed { + my ($hintlabel)=@_; + $hintlabel=~s/^R//; + push(@Apache::functionplotresponse::failedrules,$hintlabel); + &addlog("Set hint condition $hintlabel"); +} + +sub start_functionplotruleset { + my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_; + if ($target eq 'edit') { + return &Apache::edit::start_table($token). + ''.&mt('Function Plot Rule Set').'' + .''.&mt('Delete?').' ' + .&Apache::edit::deletelist($target,$token).'   '. + &Apache::edit::insertlist($target,$token).'   ' + .&Apache::loncommon::help_open_topic('Function_Plot_Response_Rule_Set','Function Plot Rules') + .'' + ." " + .&Apache::edit::end_row() + .&Apache::edit::start_spanning_row() + ."\n"; + } +} + +sub end_functionplotruleset { + my ($target,$token,$tagstack,$parstack,$parser,$safeeval)=@_; + my $id=$Apache::inputtags::response[-1]; + my $partid=$Apache::inputtags::part; + my $internalid = $partid.'_'.$id; + + if ($target eq 'edit' ) { + return &Apache::edit::end_table(); + } elsif ($target eq 'grade' + && &Apache::response::submitted() + && $Apache::lonhomework::type ne 'exam') { +# +# Actually grade +# + my ($xmin,$xmax,$ymin,$ymax)=&boundaries($parstack,$safeeval,-2); + + my $ad=''; + undef %Apache::functionplotresponse::functionplotrulelabels; + $Apache::functionplotresponse::ruleslog=''; + $Apache::functionplotresponse::functionplotrulelabels{'start'}=400; + $Apache::functionplotresponse::functionplotrulelabels{'end'}=0; + if (&populate_arrays($internalid,$xmin,$xmax,$ymin,$ymax) eq 'no_func') { + $ad='NOT_FUNCTION'; + } else { + &addlog("Start of function ".&actualval($Apache::functionplotresponse::functionplotrulelabels{'start'},$xmin,$xmax)." (index ". + $Apache::functionplotresponse::functionplotrulelabels{'start'}.")"); + &addlog("End of function ".&actualval($Apache::functionplotresponse::functionplotrulelabels{'end'},$xmin,$xmax)." (index ". + $Apache::functionplotresponse::functionplotrulelabels{'end'}.")"); + +# We have a function that we can actually grade, go through the spline rules. + foreach my $rule (@Apache::functionplotresponse::functionplotrules) { + unless (&functionplotrulecheck($rule,$xmin,$xmax,$ymin,$ymax,$safeeval)) { + $ad='INCORRECT'; + last; + } + } +# And now go through the vector rules + foreach my $rule (@Apache::functionplotresponse::functionplotvectorrules) { + unless (&functionplotvectorrulecheck($rule,$xmin,$xmax,$ymin,$ymax,$safeeval)) { + $ad='INCORRECT'; + last; + } + } +# If it's not wrong, it's correct + unless ($ad) { $ad='EXACT_ANS' }; + } + &addlog("Set hint conditions: ".join(",",@Apache::functionplotresponse::failedrules)); + &addlog("Assigned award detail: $ad"); +# Store for later to be assigned at end_functionplotresponse + $Apache::functionplotresponse::awarddetail=$ad; + } +} + + sub end_functionplotresponse { my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_; &Apache::response::end_response; my $result; - my $internalid = $Apache::inputtags::part.'_'.$Apache::inputtags::response[-1]; + my $id=$Apache::inputtags::response[-1]; + my $partid=$Apache::inputtags::part; + my $internalid = $partid.'_'.$id; -# if ($target eq 'edit') { $result=&Apache::edit::end_table(); } - if ($target eq 'web') { + if ($target eq 'edit') { $result=&Apache::edit::end_table(); } + if ($target eq 'grade' + && &Apache::response::submitted() + && $Apache::lonhomework::type eq 'exam') { + + &Apache::response::scored_response($partid,$id); + + } elsif ($target eq 'grade' + && &Apache::response::submitted() + && $Apache::lonhomework::type ne 'exam') { + my ($response,%coords)=&get_answer_from_form_fields($internalid); + $Apache::lonhomework::results{"resource.$partid.$id.submission"}=$response; + my %previous=&Apache::response::check_for_previous($response,$partid,$id); +# +# Assign grade +# + my $ad=$Apache::functionplotresponse::awarddetail; +# +# Store grading info +# + $Apache::lonhomework::results{"resource.$partid.$id.awarddetail"}=$ad; + &Apache::response::handle_previous(\%previous,$ad); + } elsif ($target eq 'web') { + undef @Apache::functionplotresponse::failedrules; + } + return $result; +} + +sub end_functionplotelements { + my ($target,$token,$tagstack,$parstack,$parser,$safeeval)=@_; + my $result=''; + my $id=$Apache::inputtags::response[-1]; + my $partid=$Apache::inputtags::part; + my $internalid = $partid.'_'.$id; + if ($target eq 'edit' ) { + $result=&Apache::edit::end_table(); + } elsif ($target eq 'web') { + my ($xmin,$xmax,$ymin,$ymax)=&boundaries($parstack,$safeeval,-2); + +# Are we in show answer mode? + my $showanswer=&Apache::response::show_answer(); + if ($showanswer) { +# Render answerdisplay + my $answerdisplay=&Apache::lonxml::get_param('answerdisplay',$parstack,$safeeval,-2); + if ($answerdisplay=~/\S/s) { + foreach my $plot (split(/\s*\,\s*/,$answerdisplay)) { + my @components=split(/\s*\:\s*/,$plot); + if ($#components<3) { +# Just a simple plot + my ($func,$xl,$xh)=@components; + if ((!defined($xl)) || ($xl eq '')) { $xl=$xmin; } + if ((!defined($xh)) || ($xh eq '')) { $xh=$xmax; } + $result.=&plot_script($internalid,$func,1,'','00aa00',$xl,$xh,6); + } else { +# This is a spline + $result.=&answer_spline_script($internalid,@components); + } + } + } + } + my $fixed=0; + if (($showanswer) || (&Apache::response::check_status()>=2)) { $fixed=1; } +# Now is the time to render all of the stored splines + foreach my $label (keys(%Apache::functionplotresponse::splineorder)) { + $result.=&generate_spline($internalid,$label,$xmin,$xmax,$ymin,$ymax,$fixed); + } +# close the init script $result.=&end_init_script(); - $result.=&geogebra_startcode($internalid); +# register all splines in this response + $result.=''."\n"; + foreach my $label (keys(%Apache::functionplotresponse::splineorder)) { + $result.=''."\n"; + } +# generate the input fields + $result.=$Apache::functionplotresponse::inputfields; +# actually start the -tag + $result.=&geogebra_startcode($internalid, + &Apache::lonxml::get_param('width',$parstack,$safeeval,-2), + &Apache::lonxml::get_param('height',$parstack,$safeeval,-2)); +# load the spline bytecode $result.=&geogebra_spline_program(); +# set default parameters $result.=&geogebra_default_parameters($internalid); +# close the -tag $result.=&geogebra_endcode(); } return $result; } + +sub boundaries { + my ($parstack,$safeeval,$level)=@_; + my $xmin=&Apache::lonxml::get_param('xmin',$parstack,$safeeval,$level); + $xmin=(defined($xmin)?$xmin:-10); + my $xmax=&Apache::lonxml::get_param('xmax',$parstack,$safeeval,$level); + $xmax=(defined($xmax)?$xmax:10); + my $ymin=&Apache::lonxml::get_param('ymin',$parstack,$safeeval,$level); + $ymin=(defined($ymin)?$ymin:-10); + my $ymax=&Apache::lonxml::get_param('ymax',$parstack,$safeeval,$level); + $ymax=(defined($ymax)?$ymax:10); + if ($xmax<=$xmin) { + $xmax=$xmin+20; + } + if ($ymax<=$ymin) { + $ymax=$ymin+20; + } + return ($xmin,$xmax,$ymin,$ymax); +} + +sub start_functionplotelements { + my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_; + my $result=''; + my $id=$Apache::inputtags::response[-1]; + my $partid=$Apache::inputtags::part; + my $internalid = $partid.'_'.$id; + + if ($target eq 'edit') { + return &Apache::edit::start_table($token). + ''.&mt('Function Plot Elements').'' + .''.&mt('Delete?').' ' + .&Apache::edit::deletelist($target,$token).'   '. + &Apache::edit::insertlist($target,$token).'   ' + .&Apache::loncommon::help_open_topic('Function_Plot_Response_Elements','Function Plot Elements') + .'' + ." " + .&Apache::edit::end_row() + .&Apache::edit::start_spanning_row() + ."\n"; + } elsif ($target eq 'web') { + my ($xmin,$xmax,$ymin,$ymax)=&boundaries($parstack,$safeeval,-2); + my $xaxisvisible=(&Apache::lonxml::get_param('xaxisvisible',$parstack,$safeeval,-2)=~/on|true|yes|1/i?'true':'false'); + my $yaxisvisible=(&Apache::lonxml::get_param('yaxisvisible',$parstack,$safeeval,-2)=~/on|true|yes|1/i?'true':'false'); + my $gridvisible=(&Apache::lonxml::get_param('gridvisible',$parstack,$safeeval,-2)=~/on|true|yes|1/i?'true':'false'); + my $xlabel=&Apache::lonxml::get_param('xlabel',$parstack,$safeeval,-2); + my $ylabel=&Apache::lonxml::get_param('ylabel',$parstack,$safeeval,-2); + + +# paste in the update routine to receive stuff back from the applet + $result.=&update_script($internalid); +# start the initscript for this applet + $result.=&start_init_script($internalid); +# put the axis commands inside + $result.=&axes_script($internalid,$xmin,$xmax,$ymin,$ymax,$xaxisvisible,$yaxisvisible,$gridvisible); + $result.=&axes_label($internalid,$xmin,$xmax,$ymin,$ymax,$xlabel,$ylabel); +# init script is left open + } + return $result; +} 1;