--- loncom/homework/functionplotresponse.pm 2011/01/26 20:20:50 1.52
+++ loncom/homework/functionplotresponse.pm 2011/11/21 02:34:58 1.80
@@ -1,7 +1,7 @@
# LearningOnline Network with CAPA
-# option list style responses
+# Functionplot responses
#
-# $Id: functionplotresponse.pm,v 1.52 2011/01/26 20:20:50 www Exp $
+# $Id: functionplotresponse.pm,v 1.80 2011/11/21 02:34:58 www Exp $
#
# Copyright Michigan State University Board of Trustees
#
@@ -31,9 +31,11 @@ use strict;
use Apache::response();
use Apache::lonlocal;
use Apache::lonnet;
+use Apache::run;
BEGIN {
&Apache::lonxml::register('Apache::functionplotresponse',('functionplotresponse','backgroundplot','spline',
+ 'plotobject','plotvector','functionplotvectorrule','functionplotvectorsumrule',
'functionplotrule','functionplotruleset',
'functionplotelements'));
}
@@ -61,7 +63,7 @@ sub geogebra_endcode {
#
sub geogebra_spline_program {
return (<
+
ENDSPLINEPROGRAM
}
@@ -74,8 +76,8 @@ sub geogebra_default_parameters {
-
-
+
+
@@ -163,6 +165,14 @@ sub update_register {
sub set_point_coordinate {
my ($id,$variable,$x,$y,$fixed)=@_;
my $mult=($fixed?'a*':'');
+# Get rid of wild exponents, make sure it's a number
+ $x=1.*$x;
+ $y=1.*$y;
+# GeoGebra does not understand "E"
+ $x=~s/[e|E]/\*10\^/;
+ $x=~s/\+//;
+ $y=~s/[e|E]/\*10\^/;
+ $y=~s/\+//;
return (<8) { $order=8; }
+ $Apache::functionplotresponse::counter++;
+ my $label='CSpline'.$Apache::functionplotresponse::counter;
+ my $output='document.ggbApplet_'.$id.'.evalCommand("'.$label.'=Spline'.$order.'[';
+ for (my $i=0;$i<=$#points;$i+=4) {
+ $output.="($points[$i],$points[$i+1]),($points[$i+2],$points[$i+3]),";
+ }
+ $output=~s/\,$//;
+ $output.=']");'."\n";
+ for (my $i=2; $i<2*$order; $i+=2) {
+ $output.='document.ggbApplet_'.$id.'.setColor("'.$label.'_'.($i>=10?'{':'').$i.($i>=10?'}':'').'",0,170,0);'."\n";
+ }
+ for (my $i=1; $i<2*$order; $i+=2) {
+ $output.='document.ggbApplet_'.$id.'.setVisible("'.$label.'_'.($i>=10?'{':'').$i.($i>=10?'}':'').'",false);'."\n";
+ }
+
+ return $output;
+}
+
+#
# Subroutine that generates code for spline $label based on stored information
#
@@ -390,6 +480,109 @@ sub generate_spline {
$result.='document.ggbApplet_'.$id.'.evalCommand("Spline'.$order.'['.join(',',@coords).']");'."\n";
return $result;
}
+
+#
+# Object
+#
+
+sub start_plotobject {
+ my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_;
+ my $result='';
+ my $internalid = $Apache::inputtags::part.'_'.$Apache::inputtags::response[-1];
+ my $x=&Apache::lonxml::get_param('x',$parstack,$safeeval);
+ my $y=&Apache::lonxml::get_param('y',$parstack,$safeeval);
+ my $label=&Apache::lonxml::get_param('label',$parstack,$safeeval);
+ $label=~s/\W//gs;
+ $label=ucfirst($label);
+ unless ($label) { $label="NewObject"; }
+ if ($target eq 'web') {
+ my ($xmin,$xmax,$ymin,$ymax)=&boundaries($parstack,$safeeval,-3);
+ unless (defined($x)) { $x=$xmin; }
+ unless (defined($y)) { $y=$ymin; }
+ $result.=&plotobject_script($internalid,$label,$x,$y);
+ } elsif ($target eq 'edit') {
+ $result=&Apache::edit::tag_start($target,$token,'Plot Object').
+ &Apache::edit::text_arg('Label on Plot:','label',
+ $token,'16').
+ &Apache::edit::text_arg('x:','x',
+ $token,'8').
+ &Apache::edit::text_arg('y:','y',
+ $token,'8').
+ &Apache::edit::end_row();
+ } elsif ($target eq 'modified') {
+ $env{'form.'.&Apache::edit::html_element_name('label')}=ucfirst($env{'form.'.&Apache::edit::html_element_name('label')});
+ my $constructtag=&Apache::edit::get_new_args($token,$parstack,$safeeval,'label','x','y');
+ if ($constructtag) { $result=&Apache::edit::rebuild_tag($token); }
+ }
+ return $result;
+}
+
+sub end_plotobject {
+ my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_;
+ my $result='';
+ if ($target eq 'edit') {
+ $result=&Apache::edit::end_table();
+ }
+ return $result;
+}
+
+#
+# Vector
+#
+
+sub start_plotvector {
+ my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_;
+ my $result='';
+ my $internalid = $Apache::inputtags::part.'_'.$Apache::inputtags::response[-1];
+ my $tailx=&Apache::lonxml::get_param('tailx',$parstack,$safeeval);
+ my $taily=&Apache::lonxml::get_param('taily',$parstack,$safeeval);
+ my $tipx=&Apache::lonxml::get_param('tipx',$parstack,$safeeval);
+ my $tipy=&Apache::lonxml::get_param('tipy',$parstack,$safeeval);
+
+ my $label=&Apache::lonxml::get_param('label',$parstack,$safeeval);
+ $label=~s/\W//gs;
+ $label=ucfirst($label);
+ unless ($label) { $label="NewVector"; }
+ if ($target eq 'web') {
+ my ($xmin,$xmax,$ymin,$ymax)=&boundaries($parstack,$safeeval,-3);
+ unless (defined($tailx)) { $tailx=$xmin; }
+ unless (defined($taily)) { $taily=$ymin; }
+ unless (defined($tipx)) { $tipx=$xmin; }
+ unless (defined($tipy)) { $tipy=$ymin; }
+ $result.=&plotvector_script($internalid,$label,$tailx,$taily,$tipx,$tipy,$xmin,$xmax);
+ } elsif ($target eq 'edit') {
+ $result=&Apache::edit::tag_start($target,$token,'Plot Vector').
+ &Apache::edit::text_arg('Label on Plot:','label',
+ $token,'16').
+ &Apache::edit::text_arg('Tail x:','tailx',
+ $token,'8').
+ &Apache::edit::text_arg('Tail y:','taily',
+ $token,'8').
+ &Apache::edit::text_arg('Tip x:','tipx',
+ $token,'8').
+ &Apache::edit::text_arg('Tip y:','tipy',
+ $token,'8').
+
+ &Apache::edit::end_row();
+ } elsif ($target eq 'modified') {
+ $env{'form.'.&Apache::edit::html_element_name('label')}=ucfirst($env{'form.'.&Apache::edit::html_element_name('label')});
+ my $constructtag=&Apache::edit::get_new_args($token,$parstack,$safeeval,'label','tailx','taily','tipx','tipy');
+ if ($constructtag) { $result=&Apache::edit::rebuild_tag($token); }
+ }
+ return $result;
+}
+
+sub end_plotvector {
+ my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_;
+ my $result='';
+ if ($target eq 'edit') {
+ $result=&Apache::edit::end_table();
+ }
+ return $result;
+}
+
+
+
#
#
#
@@ -501,7 +694,7 @@ sub start_functionplotrule {
&Apache::lonxml::get_param('percenterror',$parstack,$safeeval)
)));
} elsif ($target eq 'edit') {
- $result=&Apache::edit::tag_start($target,$token,'Function Plot Evaluation Rule').
+ $result=&Apache::edit::tag_start($target,$token,'Function Plot Graph Rule').
&Apache::edit::text_arg('Index/Name:','index',
$token,'10').' '.
&Apache::edit::select_arg(&mt('Function:'),'derivativeorder',
@@ -531,11 +724,17 @@ sub start_functionplotrule {
['lt','less than'],
['le','less than or equal']],$token).
$result.= &Apache::edit::select_or_text_arg('Value:','value',
- [['undef','not defined']],$token,'8').
+ [['undef','not defined']],$token,'30').
&Apache::edit::text_arg('Percent error:','percenterror',
$token,'8').
&Apache::edit::end_row();
} elsif ($target eq 'modified') {
+ if (($env{'form.'.&Apache::edit::html_element_name('xinitial')} ne '') && ($env{'form.'.&Apache::edit::html_element_name('xinitiallabel')} eq 'start')) {
+ $env{'form.'.&Apache::edit::html_element_name('xinitiallabel')}='';
+ }
+ if (($env{'form.'.&Apache::edit::html_element_name('xfinal')} ne '') && ($env{'form.'.&Apache::edit::html_element_name('xfinallabel')} eq 'end')) {
+ $env{'form.'.&Apache::edit::html_element_name('xfinallabel')}='';
+ }
my $constructtag=&Apache::edit::get_new_args($token,$parstack,
$safeeval,'index','derivativeorder',
'xinitial','xinitiallabel','xfinal','xfinallabel',
@@ -557,6 +756,203 @@ sub end_functionplotrule {
#
+#
+#
+sub start_functionplotvectorrule {
+ my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_;
+ my $result='';
+ my $label=&Apache::lonxml::get_param('index',$parstack,$safeeval);
+ $Apache::functionplotresponse::counter++;
+ if ($label=~/\W/) {
+ &Apache::lonxml::warning(&mt('Rule indices should only contain alphanumeric characters.'));
+ }
+ $label=~s/\W//gs;
+ unless ($label) {
+ $label='R'.$Apache::functionplotresponse::counter;
+ } else {
+ $label='R'.$label;
+ }
+ if ($Apache::functionplotresponse::splineorder{$label}) {
+ &Apache::lonxml::error(&mt('Rule indices must be unique.'));
+ }
+
+ if ($target eq 'grade') {
+# Simply remember - in order - for later
+
+ my $id=$Apache::inputtags::response[-1];
+ my $partid=$Apache::inputtags::part;
+ my $internalid = $partid.'_'.$id;
+
+ my $vector=&Apache::lonxml::get_param('vector',$parstack,$safeeval);
+ $vector=~s/\W//gs;
+ $vector=ucfirst($vector);
+
+ my $attachpoint=&Apache::lonxml::get_param('attachpoint',$parstack,$safeeval);
+ $attachpoint=~s/\W//gs;
+ $attachpoint=ucfirst($attachpoint);
+
+ my $notattachpoint=&Apache::lonxml::get_param('notattachpoint',$parstack,$safeeval);
+ $notattachpoint=~s/\W//gs;
+ $notattachpoint=ucfirst($notattachpoint);
+
+ my $tailpoint=&Apache::lonxml::get_param('tailpoint',$parstack,$safeeval);
+ $tailpoint=~s/\W//gs;
+ $tailpoint=ucfirst($tailpoint);
+ my $tippoint=&Apache::lonxml::get_param('tippoint',$parstack,$safeeval);
+ $tippoint=~s/\W//gs;
+ $tippoint=ucfirst($tippoint);
+
+ my $nottailpoint=&Apache::lonxml::get_param('nottailpoint',$parstack,$safeeval);
+ $nottailpoint=~s/\W//gs;
+ $nottailpoint=ucfirst($nottailpoint);
+ my $nottippoint=&Apache::lonxml::get_param('nottippoint',$parstack,$safeeval);
+ $nottippoint=~s/\W//gs;
+ $nottippoint=ucfirst($nottippoint);
+
+ push(@Apache::functionplotresponse::functionplotvectorrules,join(':',(
+ $label,
+ 'vector',
+ $internalid,
+ $vector,
+ $attachpoint,
+ $notattachpoint,
+ $tailpoint,
+ $tippoint,
+ $nottailpoint,
+ $nottippoint,
+ &Apache::lonxml::get_param('length',$parstack,$safeeval),
+ &Apache::lonxml::get_param('angle',$parstack,$safeeval),
+ &Apache::lonxml::get_param('lengtherror',$parstack,$safeeval),
+ &Apache::lonxml::get_param('angleerror',$parstack,$safeeval),
+ )));
+ } elsif ($target eq 'edit') {
+ $result=&Apache::edit::tag_start($target,$token,'Function Plot Vector Rule').
+ &Apache::edit::text_arg('Index/Name:','index',
+ $token,'10').' '.
+ &Apache::edit::text_arg('Vector:','vector',
+ $token,'16').'
'.
+ &Apache::edit::text_arg('Attached to object:','attachpoint',
+ $token,'16').
+ &Apache::edit::text_arg('Not attached to object:','notattachpoint',
+ $token,'16').'
'.
+ &Apache::edit::text_arg('Tail attached to object:','tailpoint',
+ $token,'16').
+ &Apache::edit::text_arg('Tip attached to object:','tippoint',
+ $token,'16').
+ &Apache::edit::text_arg('Tail not attached to object:','nottailpoint',
+ $token,'16').
+ &Apache::edit::text_arg('Tip not attached to object:','nottippoint',
+ $token,'16').'
'.
+ &Apache::edit::text_arg('Length:','length',
+ $token,'16').
+ &Apache::edit::text_arg('Angle:','angle',
+ $token,'16').
+ &Apache::edit::text_arg('Absolute error length:','lengtherror',
+ $token,'8').
+ &Apache::edit::text_arg('Absolute error angle:','angleerror',
+ $token,'8').
+ &Apache::edit::end_row();
+ } elsif ($target eq 'modified') {
+ $env{'form.'.&Apache::edit::html_element_name('vector')}=ucfirst($env{'form.'.&Apache::edit::html_element_name('vector')});
+ $env{'form.'.&Apache::edit::html_element_name('attachpoint')}=ucfirst($env{'form.'.&Apache::edit::html_element_name('attachpoint')});
+ $env{'form.'.&Apache::edit::html_element_name('notattachpoint')}=ucfirst($env{'form.'.&Apache::edit::html_element_name('notattachpoint')});
+ $env{'form.'.&Apache::edit::html_element_name('tailpoint')}=ucfirst($env{'form.'.&Apache::edit::html_element_name('tailpoint')});
+ $env{'form.'.&Apache::edit::html_element_name('tippoint')}=ucfirst($env{'form.'.&Apache::edit::html_element_name('tippoint')});
+ $env{'form.'.&Apache::edit::html_element_name('nottailpoint')}=ucfirst($env{'form.'.&Apache::edit::html_element_name('nottailpoint')});
+ $env{'form.'.&Apache::edit::html_element_name('nottippoint')}=ucfirst($env{'form.'.&Apache::edit::html_element_name('nottippoint')});
+ my $constructtag=&Apache::edit::get_new_args($token,$parstack,
+ $safeeval,'index','vector','attachpoint','notattachpoint',
+ 'tailpoint','tippoint','nottailpoint','nottipoint',
+ 'length','angle',
+ 'lengtherror','angleerror');
+ if ($constructtag) { $result=&Apache::edit::rebuild_tag($token); }
+ }
+ return $result;
+}
+
+sub end_functionplotvectorrule {
+ my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_;
+ my $result='';
+ if ($target eq 'edit') {
+ $result=&Apache::edit::end_table();
+ }
+ return $result;
+}
+
+#
+#
+#
+sub start_functionplotvectorsumrule {
+ my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_;
+ my $result='';
+ my $label=&Apache::lonxml::get_param('index',$parstack,$safeeval);
+ $Apache::functionplotresponse::counter++;
+ if ($label=~/\W/) {
+ &Apache::lonxml::warning(&mt('Rule indices should only contain alphanumeric characters.'));
+ }
+ $label=~s/\W//gs;
+ unless ($label) {
+ $label='R'.$Apache::functionplotresponse::counter;
+ } else {
+ $label='R'.$label;
+ }
+ if ($Apache::functionplotresponse::splineorder{$label}) {
+ &Apache::lonxml::error(&mt('Rule indices must be unique.'));
+ }
+ if ($target eq 'grade') {
+# Simply remember - in order - for later
+ my $id=$Apache::inputtags::response[-1];
+ my $partid=$Apache::inputtags::part;
+ my $internalid = $partid.'_'.$id;
+ my $object=&Apache::lonxml::get_param('object',$parstack,$safeeval);
+ $object=~s/\W//gs;
+ $object=ucfirst($object);
+ push(@Apache::functionplotresponse::functionplotvectorrules,join(':',(
+ $label,
+ 'sum',
+ $internalid,
+ $object,
+ &Apache::lonxml::get_param('length',$parstack,$safeeval),
+ &Apache::lonxml::get_param('angle',$parstack,$safeeval),
+ &Apache::lonxml::get_param('lengtherror',$parstack,$safeeval),
+ &Apache::lonxml::get_param('angleerror',$parstack,$safeeval),
+ )));
+ } elsif ($target eq 'edit') {
+ $result=&Apache::edit::tag_start($target,$token,'Function Plot Vector Sum Rule').
+ &Apache::edit::text_arg('Index/Name:','index',
+ $token,'10').' '.
+ &Apache::edit::text_arg('Vectors attached to object:','object',
+ $token,'16').'
'.
+ &Apache::edit::text_arg('Sum vector length:','length',
+ $token,'16').
+ &Apache::edit::text_arg('Sum vector angle:','angle',
+ $token,'16').
+ &Apache::edit::text_arg('Error length:','lengtherror',
+ $token,'8').
+ &Apache::edit::text_arg('Error angle:','angleerror',
+ $token,'8').
+ &Apache::edit::end_row();
+ } elsif ($target eq 'modified') {
+ $env{'form.'.&Apache::edit::html_element_name('object')}=ucfirst($env{'form.'.&Apache::edit::html_element_name('object')});
+ my $constructtag=&Apache::edit::get_new_args($token,$parstack,
+ $safeeval,'index','object',
+ 'length','angle',
+ ,'lengtherror','angleerror');
+ if ($constructtag) { $result=&Apache::edit::rebuild_tag($token); }
+ }
+ return $result;
+}
+
+sub end_functionplotvectorsumrule {
+ my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_;
+ my $result='';
+ if ($target eq 'edit') {
+ $result=&Apache::edit::end_table();
+ }
+ return $result;
+}
+
+#
#
#
# Unfortunately, GeoGebra seems to want all splines after everything else, so we need to store them
@@ -713,7 +1109,7 @@ sub array_index {
#
sub populate_arrays {
- my ($id,$xmin,$xmax)=@_;
+ my ($id,$xmin,$xmax,$ymin,$ymax)=@_;
for (my $i=0; $i<=400; $i++) {
$Apache::functionplotresponse::actualxval[$i]=undef;
$Apache::functionplotresponse::func[$i]=undef;
@@ -741,12 +1137,19 @@ sub populate_arrays {
my $xi=&array_index($xmin,$xmax,$xreal);
if ($xi<$xiold) { return 'no_func'; }
if (($xi>$xiold) && ($xi>=0) && ($xi<=400)) {
- if (defined($Apache::functionplotresponse::func[$xi])) { return 'no_func'; }
$xiold=$xi;
$Apache::functionplotresponse::actualxval[$xi]=$xreal;
# Function value
my $funcval=&cubic_hermite($t,@yparms);
+
+# Do we already have a value for this point, and is it different from the new one?
+ if ((defined($Apache::functionplotresponse::func[$xi])) &&
+ (abs($Apache::functionplotresponse::func[$xi]-$funcval)>($ymax-$ymin)/100.)) {
+ return 'no_func';
+ }
+# Okay, remember the new point
$Apache::functionplotresponse::func[$xi]=$funcval;
+
if (defined($funcval)) {
if ($xi<$Apache::functionplotresponse::functionplotrulelabels{'start'}) {
$Apache::functionplotresponse::functionplotrulelabels{'start'}=$xi;
@@ -790,6 +1193,7 @@ sub start_functionplotresponse {
$Apache::functionplotresponse::counter=0;
# Remember rules
undef @Apache::functionplotresponse::functionplotrules;
+ undef @Apache::functionplotresponse::functionplotvectorrules;
# Remember failed rules
if ($target eq 'grade') {
undef @Apache::functionplotresponse::failedrules;
@@ -841,9 +1245,8 @@ sub start_functionplotresponse {
['yes','no'],$token).'
'.
&Apache::edit::select_arg('Grid visible:','gridvisible',
['yes','no'],$token).'
'.
- &Apache::edit::text_arg('Background plot(s) for answer (function:xmin:xmax,function:xmin:xmax,...):',
- 'answerdisplay',$token,'50');
-
+ &Apache::edit::text_arg('Background plot(s) for answer (function(x):xmin:xmax,function(x):xmin:xmax,x1:y1:sx1:sy1:x2:y2:sx2:sy2,...):',
+ 'answerdisplay',$token,'50').
&Apache::edit::end_row().&Apache::edit::start_spanning_row();
} elsif ($target eq 'modified') {
my $constructtag=&Apache::edit::get_new_args($token,$parstack,
@@ -928,6 +1331,7 @@ sub compare_rel {
sub addlog {
my ($text)=@_;
+ $text=~s/\'/\\\'/g;
$Apache::functionplotresponse::ruleslog.=$text.'
';
}
@@ -935,15 +1339,164 @@ sub actualval {
my ($i,$xmin,$xmax)=@_;
return $xmin+$i/400.*($xmax-$xmin);
}
+
+sub fpr_val {
+ my ($arg)=@_;
+ return &actualval($Apache::functionplotresponse::functionplotrulelabels{$arg},
+ $Apache::functionplotresponse::fpr_xmin,
+ $Apache::functionplotresponse::fpr_xmax);
+}
+
+sub fpr_f {
+ my ($arg)=@_;
+ return $Apache::functionplotresponse::func[&array_index($Apache::functionplotresponse::fpr_xmin,
+ $Apache::functionplotresponse::fpr_xmax,
+ $arg)];
+}
+
+sub fpr_dfdx {
+ my ($arg)=@_;
+ return $Apache::functionplotresponse::dfuncdx[&array_index($Apache::functionplotresponse::fpr_xmin,
+ $Apache::functionplotresponse::fpr_xmax,
+ $arg)];
+}
+
+sub fpr_d2fdx2 {
+ my ($arg)=@_;
+ return $Apache::functionplotresponse::d2funcdx2[&array_index($Apache::functionplotresponse::fpr_xmin,
+ $Apache::functionplotresponse::fpr_xmax,
+ $arg)];
+}
+
+
+sub vectorcoords {
+ my ($id,$label)=@_;
+ return ($env{'form.HWVAL_'.$id.'_'.$label.'Start_x'},
+ $env{'form.HWVAL_'.$id.'_'.$label.'End_x'},
+ $env{'form.HWVAL_'.$id.'_'.$label.'Start_y'},
+ $env{'form.HWVAL_'.$id.'_'.$label.'End_y'});
+}
+
+sub objectcoords {
+ my ($id,$label)=@_;
+ return ($env{'form.HWVAL_'.$id.'_'.$label.'_x'},
+ $env{'form.HWVAL_'.$id.'_'.$label.'_y'});
+}
+
+sub vectorangle {
+ my ($x,$y)=@_;
+ my $angle=57.2957795*atan2($y,$x);
+ if ($angle<0) { $angle=360+$angle; }
+ return $angle;
+}
+
+sub vectorlength {
+ my ($x,$y)=@_;
+ return sqrt($x*$x+$y*$y);
+}
+
+sub relvector {
+ my ($xs,$xe,$ys,$ye)=@_;
+ return ($xe-$xs,$ye-$ys);
+}
+
+sub plotvectorlength {
+ return &vectorlength(&relvector(&vectorcoords(@_)));
+}
+
+sub plotvectorangle {
+ return &vectorangle(&relvector(&vectorcoords(@_)));
+}
+
+
+#
+# Evaluate a functionplotvectorrule
+#
+
+sub functionplotvectorrulecheck {
+ my ($rule,$xmin,$xmax,$ymin,$ymax,$safeeval)=@_;
+ &addlog("=================");
+ my ($label,$type)=split(/\:/,$rule);
+ if ($type eq 'vector') {
+ return &vectorcheck($rule,$xmin,$xmax,$ymin,$ymax,$safeeval);
+ } elsif ($type eq 'sum') {
+ return &sumcheck($rule,$xmin,$xmax,$ymin,$ymax,$safeeval);
+ }
+}
+
+sub vectorcheck {
+ my ($rule,$xmin,$xmax,$ymin,$ymax,$safeeval)=@_;
+ my ($label,$type,$id,$vector,
+ $attachpoint,$notattachpoint,
+ $tailpoint,$tippoint,$nottailpoint,$nottippoint,
+ $length,$angle,$lengtherror,$angleerror)=split(/\:/,$rule);
+ &addlog("Vector Rule $label for vector ".$vector);
+ if ($length ne '') {
+ &addlog("Checking for length $length with error $lengtherror");
+ $length=&Apache::run::run($length,$safeeval);
+ &addlog("Length evaluated to $length");
+ my $thislength=&plotvectorlength($id,$vector);
+ &addlog("Found length $thislength");
+ if (abs($thislength-$length)>$lengtherror) {
+ &setfailed($label);
+ return 0;
+ }
+ }
+ if ($angle ne '') {
+ &addlog("Checking for angle $angle with error $angleerror");
+ $angle=&Apache::run::run($angle,$safeeval);
+ &addlog("Angle evaluated to $angle");
+ my $thisangle=&plotvectorangle($id,$vector);
+ &addlog("Found angle $thisangle");
+ my $anglediff=abs($thisangle-$angle);
+ &addlog("Angle difference: $anglediff");
+ if ($anglediff>360.-$anglediff) {
+ $anglediff=360.-$anglediff;
+ }
+ &addlog("Smallest angle difference: $anglediff");
+ if ($anglediff>$angleerror) {
+ &setfailed($label);
+ return 0;
+ }
+ }
+ &addlog("Rule $label passed.");
+ return 1;
+}
+
+sub sumcheck {
+ my ($rule,$xmin,$xmax,$ymin,$ymax,$safeeval)=@_;
+ my ($label,$type,$id,$object,$length,$angle,$lengtherror,$angleerror)=split(/\:/,$rule);
+ &addlog("Vector Sum Rule $label for vectors attached to ".$object);
+
+ &addlog("Rule $label passed.");
+ return 1;
+}
+
+#
+# Evaluate a functionplotrule
+#
sub functionplotrulecheck {
- my ($rule,$xmin,$xmax,$ymin,$ymax)=@_;
+ my ($rule,$xmin,$xmax,$ymin,$ymax,$safeeval)=@_;
my ($label,$derivative,$xinitial,$xinitiallabel,$xfinal,$xfinallabel,$minimumlength,$maximumlength,$relationship,$value,$percent)
=split(/\:/,$rule);
$percent=($percent>0?$percent:5);
&addlog("=================");
&addlog("Rule $label for ".($derivative<0?'integral':('function itself','first derivative','second derivative')[$derivative])." $relationship $value");
+#
+# Evaluate the value
+#
+ if ($value=~/\D/) {
+ $Apache::functionplotresponse::fpr_xmin=$xmin;
+ $Apache::functionplotresponse::fpr_xmax=$xmax;
+ $value=&Apache::run::run($value,$safeeval);
+ &addlog("Value evaluated to $value");
+ }
+
+#
+# Minimum and maximum lengths of the interval
+#
if ((defined($minimumlength)) || (defined($maximumlength))) {
&addlog("Minimumlength $minimumlength Maximumlength $maximumlength");
}
@@ -1018,10 +1571,7 @@ sub functionplotrulecheck {
unless (&compare_rel($relationship,$value,$integral,$tol)) {
&addlog("Actual integral ".(defined($integral)?$integral:'undef').", expected $value, tolerance $tol");
&addlog("Rule $label failed.");
- my $hintlabel=$label;
- $hintlabel=~s/^R//;
- push(@Apache::functionplotresponse::failedrules,$hintlabel);
- &addlog("Set hint condition $hintlabel");
+ &setfailed($label);
return 0;
}
} else {
@@ -1087,8 +1637,7 @@ sub checklength {
}
sub setfailed {
- my ($label)=@_;
- my $hintlabel=$label;
+ my ($hintlabel)=@_;
$hintlabel=~s/^R//;
push(@Apache::functionplotresponse::failedrules,$hintlabel);
&addlog("Set hint condition $hintlabel");
@@ -1132,7 +1681,7 @@ sub end_functionplotruleset {
$Apache::functionplotresponse::ruleslog='';
$Apache::functionplotresponse::functionplotrulelabels{'start'}=400;
$Apache::functionplotresponse::functionplotrulelabels{'end'}=0;
- if (&populate_arrays($internalid,$xmin,$xmax) eq 'no_func') {
+ if (&populate_arrays($internalid,$xmin,$xmax,$ymin,$ymax) eq 'no_func') {
$ad='NOT_FUNCTION';
} else {
&addlog("Start of function ".&actualval($Apache::functionplotresponse::functionplotrulelabels{'start'},$xmin,$xmax)." (index ".
@@ -1142,7 +1691,14 @@ sub end_functionplotruleset {
# We have a function that we can actually grade, go through the spline rules.
foreach my $rule (@Apache::functionplotresponse::functionplotrules) {
- unless (&functionplotrulecheck($rule,$xmin,$xmax,$ymin,$ymax)) {
+ unless (&functionplotrulecheck($rule,$xmin,$xmax,$ymin,$ymax,$safeeval)) {
+ $ad='INCORRECT';
+ last;
+ }
+ }
+# And now go through the vector rules
+ foreach my $rule (@Apache::functionplotresponse::functionplotvectorrules) {
+ unless (&functionplotvectorrulecheck($rule,$xmin,$xmax,$ymin,$ymax,$safeeval)) {
$ad='INCORRECT';
last;
}
@@ -1213,10 +1769,17 @@ sub end_functionplotelements {
my $answerdisplay=&Apache::lonxml::get_param('answerdisplay',$parstack,$safeeval,-2);
if ($answerdisplay=~/\S/s) {
foreach my $plot (split(/\s*\,\s*/,$answerdisplay)) {
- my ($func,$xl,$xh)=split(/\s*\:\s*/,$plot);
- if ((!defined($xl)) || ($xl eq '')) { $xl=$xmin; }
- if ((!defined($xh)) || ($xh eq '')) { $xh=$xmax; }
- $result.=&plot_script($internalid,$func,1,'','00aa00',$xl,$xh,6);
+ my @components=split(/\s*\:\s*/,$plot);
+ if ($#components<3) {
+# Just a simple plot
+ my ($func,$xl,$xh)=@components;
+ if ((!defined($xl)) || ($xl eq '')) { $xl=$xmin; }
+ if ((!defined($xh)) || ($xh eq '')) { $xh=$xmax; }
+ $result.=&plot_script($internalid,$func,1,'','00aa00',$xl,$xh,6);
+ } else {
+# This is a spline
+ $result.=&answer_spline_script($internalid,@components);
+ }
}
}
}