--- loncom/homework/grades.pm	2007/06/22 23:45:19	1.418
+++ loncom/homework/grades.pm	2007/10/01 19:41:51	1.442
@@ -1,7 +1,7 @@
 # The LearningOnline Network with CAPA
 # The LON-CAPA Grading handler
 #
-# $Id: grades.pm,v 1.418 2007/06/22 23:45:19 albertel Exp $
+# $Id: grades.pm,v 1.442 2007/10/01 19:41:51 banghart Exp $
 #
 # Copyright Michigan State University Board of Trustees
 #
@@ -45,36 +45,26 @@ use LONCAPA;
 
 use POSIX qw(floor);
 
-my %oldessays=();
+
 my %perm=();
+my %bubble_lines_per_response;     # no. bubble lines for each response.
+                                   # index is "symb.part_id"
+
 
 # ----- These first few routines are general use routines.----
 #
 # --- Retrieve the parts from the metadata file.---
 sub getpartlist {
     my ($symb) = @_;
-    my (undef,undef,$url) = &Apache::lonnet::decode_symb($symb);
-    my $partorder = &Apache::lonnet::metadata($url, 'partorder');
-    my @parts;
-    if ($partorder) {
-	for my $part (split (/,/,$partorder)) {
-	    if (!&Apache::loncommon::check_if_partid_hidden($part,$symb)) {
-		push(@parts, $part);
-	    }
-	}	    
-    } else {
-	my $metadata = &Apache::lonnet::metadata($url, 'packages');
-	foreach (split(/\,/,$metadata)) {
-	    if ($_ =~ /^part_(.*)$/) {
-		if (!&Apache::loncommon::check_if_partid_hidden($1,$symb)) {
-		    push(@parts, $1);
-		}
-	    }
-	}
-    }
+
+    my $navmap   = Apache::lonnavmaps::navmap->new();
+    my $res      = $navmap->getBySymb($symb);
+    my $partlist = $res->parts();
+    my $url      = $res->src();
+    my @metakeys = split(/,/,&Apache::lonnet::metadata($url,'keys'));
+
     my @stores;
-    foreach my $part (@parts) {
-	my (@metakeys) = split(/,/,&Apache::lonnet::metadata($url,'keys'));
+    foreach my $part (@{ $partlist }) {
 	foreach my $key (@metakeys) {
 	    if ($key =~ m/^stores_\Q$part\E_/) { push(@stores,$key); }
 	}
@@ -195,22 +185,54 @@ sub showResourceInfo {
     return $result,$responseType,$hdgrade,$partlist,$handgrade;
 }
 
+sub reset_caches {
+    &reset_analyze_cache();
+    &reset_perm();
+}
 
-sub get_order {
-    my ($partid,$respid,$symb,$uname,$udom)=@_;
-    my (undef,undef,$url)=&Apache::lonnet::decode_symb($symb);
-    $url=&Apache::lonnet::clutter($url);
-    my $subresult=&Apache::lonnet::ssi($url,
-				       ('grade_target' => 'analyze'),
-				       ('grade_domain' => $udom),
-				       ('grade_symb' => $symb),
-				       ('grade_courseid' => 
-					        $env{'request.course.id'}),
-				       ('grade_username' => $uname));
-    (undef,$subresult)=split(/_HASH_REF__/,$subresult,2);
-    my %analyze=&Apache::lonnet::str2hash($subresult);
-    return ($analyze{"$partid.$respid.shown"});
+{
+    my %analyze_cache;
+
+    sub reset_analyze_cache {
+	undef(%analyze_cache);
+    }
+
+    sub get_analyze {
+	my ($symb,$uname,$udom)=@_;
+	my $key = "$symb\0$uname\0$udom";
+	return $analyze_cache{$key} if (exists($analyze_cache{$key}));
+
+	my (undef,undef,$url)=&Apache::lonnet::decode_symb($symb);
+	$url=&Apache::lonnet::clutter($url);
+	my $subresult=&Apache::lonnet::ssi($url,
+					   ('grade_target' => 'analyze'),
+					   ('grade_domain' => $udom),
+					   ('grade_symb' => $symb),
+					   ('grade_courseid' => 
+					    $env{'request.course.id'}),
+					   ('grade_username' => $uname));
+	(undef,$subresult)=split(/_HASH_REF__/,$subresult,2);
+	my %analyze=&Apache::lonnet::str2hash($subresult);
+	return $analyze_cache{$key} = \%analyze;
+    }
+
+    sub get_order {
+	my ($partid,$respid,$symb,$uname,$udom)=@_;
+	my $analyze = &get_analyze($symb,$uname,$udom);
+	return $analyze->{"$partid.$respid.shown"};
+    }
+
+    sub get_radiobutton_correct_foil {
+	my ($partid,$respid,$symb,$uname,$udom)=@_;
+	my $analyze = &get_analyze($symb,$uname,$udom);
+	foreach my $foil (@{&get_order($partid,$respid,$symb,$uname,$udom)}) {
+	    if ($analyze->{"$partid.$respid.foil.value.$foil"} eq 'true') {
+		return $foil;
+	    }
+	}
+    }
 }
+
 #--- Clean response type for display
 #--- Currently filters option/rank/radiobutton/match/essay/Task
 #        response types only.
@@ -259,11 +281,11 @@ sub cleanRecord {
     } elsif ($response eq 'radiobutton') {
 	my %answer=&Apache::lonnet::str2hash($answer);
 	my ($toprow,$bottomrow);
-	my $correct=($order->[0])+1;
-	for (my $i=1;$i<=$#$order;$i++) {
-	    my $foil=$order->[$i];
+	my $correct = 
+	    &get_radiobutton_correct_foil($partid,$respid,$symb,$uname,$udom);
+	foreach my $foil (@$order) {
 	    if (exists($answer{$foil})) {
-		if ($i == $correct) {
+		if ($foil eq $correct) {
 		    $toprow.='<td><b>true</b></td>';
 		} else {
 		    $toprow.='<td><i>true</i></td>';
@@ -327,7 +349,10 @@ sub cleanRecord {
 	    $result.='</ul>';
 	    return $result;
 	}
-       
+    } elsif ( $response =~ m/(?:numerical|formula)/) {
+	$answer = 
+	    &Apache::loncommon::format_previous_attempt_value('submission',
+							      $answer);
     }
     return $answer;
 }
@@ -373,6 +398,7 @@ COMMONJSFUNCTIONS
 sub getclasslist {
     my ($getsec,$filterlist) = @_;
     my @getsec;
+    my $stu_status = join(':',&Apache::loncommon::get_env_multiple('form.Status'));
     if (!ref($getsec)) {
 	if ($getsec ne '' && $getsec ne 'all') {
 	    @getsec=($getsec);
@@ -402,8 +428,8 @@ sub getclasslist {
         my $status   = 
             $classlist->{$student}->[&Apache::loncoursedata::CL_STATUS()];
 	# filter students according to status selected
-	if ($filterlist && $env{'form.Status'} ne 'Any') {
-	    if ($env{'form.Status'} ne $status) {
+	if ($filterlist && (!($stu_status =~ /Any/))) {
+	    if (!($stu_status =~ $status)) {
 		delete ($classlist->{$student});
 		next;
 	    }
@@ -485,6 +511,7 @@ sub student_gradeStatus {
 # Shows a student's view of problem and submission
 sub jscriptNform {
     my ($symb) = @_;
+    my $stu_status = join(':',&Apache::loncommon::get_env_multiple('form.Status'));
     my $jscript='<script type="text/javascript" language="javascript">'."\n".
 	'    function viewOneStudent(user,domain) {'."\n".
 	'	document.onestudent.student.value = user;'."\n".
@@ -496,7 +523,7 @@ sub jscriptNform {
 	'<input type="hidden" name="symb"    value="'.&Apache::lonenc::check_encrypt($symb).'" />'."\n".
 	'<input type="hidden" name="saveState" value="'.$env{'form.saveState'}.'" />'."\n".
 	'<input type="hidden" name="probTitle" value="'.$env{'form.probTitle'}.'" />'."\n".
-	'<input type="hidden" name="Status"  value="'.$env{'form.Status'}.'" />'."\n".
+	'<input type="hidden" name="Status"  value="'.$stu_status.'" />'."\n".
 	'<input type="hidden" name="command" value="submission" />'."\n".
 	'<input type="hidden" name="student" value="" />'."\n".
 	'<input type="hidden" name="userdom" value="" />'."\n".
@@ -538,7 +565,7 @@ sub compute_points {
 #
 
 sub most_similar {
-    my ($uname,$udom,$uessay)=@_;
+    my ($uname,$udom,$uessay,$old_essays)=@_;
 
 # ignore spaces and punctuation
 
@@ -555,23 +582,22 @@ sub most_similar {
     my $scrsid='';
     my $sessay='';
 # go through all essays ...
-    foreach my $tkey (keys %oldessays) {
-	my ($tname,$tdom,$tcrsid)=split(/\./,$tkey);
+    foreach my $tkey (keys(%$old_essays)) {
+	my ($tname,$tdom,$tcrsid)=map {&unescape($_)} (split(/\./,$tkey));
 # ... except the same student
-        if (($tname ne $uname) || ($tdom ne $udom)) {
-	    my $tessay=$oldessays{$tkey};
-            $tessay=~s/\W+/ /gs;
+        next if (($tname eq $uname) && ($tdom eq $udom));
+	my $tessay=$old_essays->{$tkey};
+	$tessay=~s/\W+/ /gs;
 # String similarity gives up if not even limit
-            my $tsimilar=&String::Similarity::similarity($uessay,$tessay,$limit);
+	my $tsimilar=&String::Similarity::similarity($uessay,$tessay,$limit);
 # Found one
-            if ($tsimilar>$limit) {
-		$limit=$tsimilar;
-                $sname=$tname;
-                $sdom=$tdom;
-                $scrsid=$tcrsid;
-                $sessay=$oldessays{$tkey};
-            }
-        } 
+	if ($tsimilar>$limit) {
+	    $limit=$tsimilar;
+	    $sname=$tname;
+	    $sdom=$tdom;
+	    $scrsid=$tcrsid;
+	    $sessay=$old_essays->{$tkey};
+	}
     }
     if ($limit>0.6) {
        return ($sname,$sdom,$scrsid,$sessay,$limit);
@@ -722,10 +748,9 @@ LISTJAVASCRIPT
     if ($env{'form.handgrade'} eq 'yes' && scalar(@$partlist) > 1) {
 	$gradeTable.='<label><input type="radio" name="lastSub" value="hdgrade" '.$checkhdgrade.' /> essay part only </label>'."\n";
     }
-
-    my $saveStatus = $env{'form.Status'} eq '' ? 'Active' : $env{'form.Status'};
+    my $stu_status = join(':',&Apache::loncommon::get_env_multiple('form.Status'));
+    my $saveStatus = $stu_status eq '' ? 'Active' : $stu_status;
     $env{'form.Status'} = $saveStatus;
-
     $gradeTable.='<label><input type="radio" name="lastSub" value="lastonly" '.$checklastsub.' /> last submission only </label>'."\n".
 	'<label><input type="radio" name="lastSub" value="last" /> last submission & parts info </label>'."\n".
 	'<label><input type="radio" name="lastSub" value="datesub" /> by dates and submissions </label>'."\n".
@@ -736,8 +761,7 @@ LISTJAVASCRIPT
         '<option value=".25">Quarter Points</option>'.
         '<option value=".1">Tenths of a Point</option>'.
         '</select>'.
-
-	'<input type="hidden" name="section"     value="'.$getsec.'" />'."\n".
+        &build_section_inputs().
 	'<input type="hidden" name="submitonly"  value="'.$submitonly.'" />'."\n".
 	'<input type="hidden" name="handgrade"   value="'.$env{'form.handgrade'}.'" /><br />'."\n".
 	'<input type="hidden" name="showgrading" value="'.$env{'form.showgrading'}.'" /><br />'."\n".
@@ -747,7 +771,7 @@ LISTJAVASCRIPT
 	'<input type="hidden" name="saveStatusOld" value="'.$saveStatus.'" />'."\n";
 
     if (exists($env{'form.gradingMenu'}) && exists($env{'form.Status'})) {
-	$gradeTable.='<input type="hidden" name="Status"   value="'.$env{'form.Status'}.'" />'."\n";
+	$gradeTable.='<input type="hidden" name="Status"   value="'.$stu_status.'" />'."\n";
     } else {
 	$gradeTable.='<b>Student Status:</b> '.
 	    &Apache::lonhtmlcommon::StatusOptions($saveStatus,undef,1,'javascript:reLoadList(this.form);').'<br />';
@@ -1663,6 +1687,19 @@ sub download_all_link {
     return
 }
 
+sub build_section_inputs {
+    my $section_inputs;
+    if ($env{'form.section'} eq '') {
+        $section_inputs .= '<input type="hidden" name="section" value="all" />'."\n";
+    } else {
+        my @sections = &Apache::loncommon::get_env_multiple('form.section');
+        foreach my $section (@sections) {
+            $section_inputs .= '<input type="hidden" name="section" value="'.$section.'" />'."\n";
+        }
+    }
+    return $section_inputs;
+}
+
 # --------------------------- show submissions of a student, option to grade 
 sub submission {
     my ($request,$counter,$total) = @_;
@@ -1671,7 +1708,6 @@ sub submission {
     $udom = ($udom eq '' ? $env{'user.domain'} : $udom); #has form.userdom changed for a student?
     my $usec = &Apache::lonnet::getsection($udom,$uname,$env{'request.course.id'});
     $env{'form.fullname'} = &Apache::loncommon::plainname($uname,$udom,'lastname') if $env{'form.fullname'} eq '';
-
     my $symb = &get_symb($request); 
     if ($symb eq '') { $request->print("Unable to handle ambiguous references:."); return ''; }
 
@@ -1691,6 +1727,7 @@ sub submission {
 	'" src="'.$request->dir_config('lonIconsURL').
 	'/check.gif" height="16" border="0" />';
 
+    my %old_essays;
     # header info
     if ($counter == 0) {
 	&sub_page_js($request);
@@ -1723,7 +1760,7 @@ sub submission {
 	    &Apache::lonxml::clear_problem_counter();
 	    $request->print(&show_problem($request,$symb,$uname,$udom,0,1,$mode));
 	}
-	
+
 	# kwclr is the only variable that is guaranteed to be non blank 
         # if this subroutine has been called once.
 	my %keyhash = ();
@@ -1742,11 +1779,11 @@ sub submission {
 	    $env{'form.savemsgN'} = $keyhash{$symb.'_savemsgN'} ne '' ? $keyhash{$symb.'_savemsgN'} : '0';
 	}
 	my $overRideScore = $env{'form.overRideScore'} eq '' ? 'no' : $env{'form.overRideScore'};
-
+	my $stu_status = join(':',&Apache::loncommon::get_env_multiple('form.Status'));
 	$request->print('<form action="/adm/grades" method="post" name="SCORE" enctype="multipart/form-data">'."\n".
 			'<input type="hidden" name="command"    value="handgrade" />'."\n".
 			'<input type="hidden" name="saveState"  value="'.$env{'form.saveState'}.'" />'."\n".
-			'<input type="hidden" name="Status"     value="'.$env{'form.Status'}.'" />'."\n".
+			'<input type="hidden" name="Status"     value="'.$stu_status.'" />'."\n".
 			'<input type="hidden" name="overRideScore" value="'.$overRideScore.'" />'."\n".
 			'<input type="hidden" name="probTitle"  value="'.$env{'form.probTitle'}.'" />'."\n".
 			'<input type="hidden" name="refresh"    value="off" />'."\n".
@@ -1757,7 +1794,7 @@ sub submission {
 			'<input type="hidden" name="vProb"      value="'.$env{'form.vProb'}.'" />'."\n".
 			'<input type="hidden" name="vAns"       value="'.$env{'form.vAns'}.'" />'."\n".
 			'<input type="hidden" name="lastSub"    value="'.$env{'form.lastSub'}.'" />'."\n".
-			'<input type="hidden" name="section"    value="'.$env{'form.section'}.'" />'."\n".
+			&build_section_inputs().
 			'<input type="hidden" name="submitonly" value="'.$env{'form.submitonly'}.'" />'."\n".
 			'<input type="hidden" name="handgrade"  value="'.$env{'form.handgrade'}.'" />'."\n".
 			'<input type="hidden" name="NCT"'.
@@ -1805,12 +1842,17 @@ KEYWORDS
 	    my ($adom,$aname,$apath)=($essayurl=~/^($LONCAPA::domain_re)\/($LONCAPA::username_re)\/(.*)$/);
 	    $apath=&escape($apath);
 	    $apath=~s/\W/\_/gs;
-	    %oldessays=&Apache::lonnet::dump('nohist_essay_'.$apath,$adom,$aname);
+	    %old_essays=&Apache::lonnet::dump('nohist_essay_'.$apath,$adom,$aname);
         }
     }
 
+# This is where output for one specific student would start
+    my $bgcolor='#DDEEDD';
+    if (int($counter/2) eq $counter) { $bgcolor='#DDDDEE'; }
+    $request->print("\n\n".
+                    '<p><table border="2"><tr><th bgcolor="'.$bgcolor.'">'.$env{'form.fullname'}.'</th></tr><tr><td bgcolor="'.$bgcolor.'">');
+
     if ($env{'form.vProb'} eq 'all' or $env{'form.vAns'} eq 'all') {
-	$request->print('<br /><br /><br />') if ($counter > 0);
 	my $mode;
 	if ($env{'form.vProb'} eq 'all' && $env{'form.vAns'} eq 'all') {
 	    $mode='both';
@@ -1943,12 +1985,21 @@ KEYWORDS
 		    my $similar='';
 		    if($env{'form.checkPlag'}){
 			my ($oname,$odom,$ocrsid,$oessay,$osim)=
-			    &most_similar($uname,$udom,$subval);
+			    &most_similar($uname,$udom,$subval,\%old_essays);
 			if ($osim) {
 			    $osim=int($osim*100.0);
-			    $similar="<hr /><h3><span class=\"LC_warning\">Essay".
-				" is $osim% similar to an essay by ".
-				&Apache::loncommon::plainname($oname,$odom).
+			    my %old_course_desc = 
+				&Apache::lonnet::coursedescription($ocrsid,
+								   {'one_time' => 1});
+
+			    $similar="<hr /><h3><span class=\"LC_warning\">".
+				&mt('Essay is [_1]% similar to an essay by [_2] ([_3]:[_4]) in course [_5] (course id [_6]:[_7])',
+				    $osim,
+				    &Apache::loncommon::plainname($oname,$odom),
+				    $oname,$odom,
+				    $old_course_desc{'description'},
+				    $old_course_desc{'num'},
+				    $old_course_desc{'domain'}).
 				'</span></h3><blockquote><i>'.
 				&keywords_highlight($oessay).
 				'</i></blockquote><hr />';
@@ -2071,6 +2122,11 @@ KEYWORDS
     }
     $request->print($result.'</td></tr></table></td></tr></table>'."\n");
 
+# Done with printing info for one student
+
+    $request->print('</td></tr></table></p>');
+
+
     # print end of form
     if ($counter == $total) {
 	my $endform='<table border="0"><tr><td>'."\n";
@@ -2954,23 +3010,25 @@ sub viewgrades {
     $result.=&jscriptNform($symb);
 
     #beginning of class grading form
+    my $stu_status = join(':',&Apache::loncommon::get_env_multiple('form.Status'));
     $result.= '<form action="/adm/grades" method="post" name="classgrade">'."\n".
 	'<input type="hidden" name="symb"    value="'.&Apache::lonenc::check_encrypt($symb).'" />'."\n".
 	'<input type="hidden" name="command" value="editgrades" />'."\n".
-	'<input type="hidden" name="section" value="'.$env{'form.section'}.'" />'."\n".
+	&build_section_inputs().
 	'<input type="hidden" name="saveState" value="'.$env{'form.saveState'}.'" />'."\n".
-	'<input type="hidden" name="Status" value="'.$env{'form.Status'}.'" />'."\n".
+	'<input type="hidden" name="Status" value="'.$env{'stu_status'}.'" />'."\n".
 	'<input type="hidden" name="probTitle" value="'.$env{'form.probTitle'}.'" />'."\n";
 
     my $sectionClass;
+    my $section_display = join (", ",&Apache::loncommon::get_env_multiple('form.section'));
     if ($env{'form.section'} eq 'all') {
 	$sectionClass='Class </h3>';
     } elsif ($env{'form.section'} eq 'none') {
-	$sectionClass='Students in no Section </h3>';
+	$sectionClass=&mt('Students in no Section').'</h3>';
     } else {
-	$sectionClass='Students in Section '.$env{'form.section'}.'</h3>';
+	$sectionClass=&mt('Students in Section(s) [_1]',$section_display).'</h3>';
     }
-    $result.='<h3>Assign Common Grade To '.$sectionClass;
+    $result.='<h3>'.&mt('Assign Common Grade To [_1]',$sectionClass);
     $result.= '<table border=0><tr><td bgcolor="#777777">'."\n".
 	'<table border=0><tr bgcolor="#ffffdd"><td>';
     #radio buttons/text box for assigning points for a section or class.
@@ -3076,8 +3134,12 @@ sub viewgrades {
 	'onClick="javascript:submit();" target="_self" /></form>'."\n";
     if (scalar(%$fullname) eq 0) {
 	my $colspan=3+scalar(@parts);
-	$result='<span class="LC_warning">There are no students in section "'.$env{'form.section'}.
-	    '" with enrollment status "'.$env{'form.Status'}.'" to modify or grade.</span>';
+	my $section_display = join (", ",&Apache::loncommon::get_env_multiple('form.section'));
+        my $stu_status = join(' or ',&Apache::loncommon::get_env_multiple('form.Status'));
+	$result='<span class="LC_warning">'.
+	    &mt('There are no students in section(s) [_1] with enrollment status [_2] to modify or grade',
+	        $section_display, $stu_status).
+	    '</span>';
     }
     $result.=&show_grading_menu_form($symb);
     return $result;
@@ -3154,9 +3216,10 @@ sub editgrades {
     my ($request) = @_;
 
     my $symb=&get_symb($request);
-    my $title='<h3><span class="LC_info">Current Grade Status</span></h3>';
-    $title.='<h4><b>Current Resource: </b>'.$env{'form.probTitle'}.'</h4><br />'."\n";
-    $title.='<h4><b>Section: </b>'.$env{'form.section'}.'</h4>'."\n";
+    my $section_display = join (", ",&Apache::loncommon::get_env_multiple('form.section'));
+    my $title='<h3><span class="LC_info">'.&mt('Current Grade Status').'</span></h3>';
+    $title.='<h4>'.&mt('<b>Current Resource: </b>[_1]',$env{'form.probTitle'}).'</h4><br />'."\n";
+    $title.='<h4>'.&mt('<b>Section: </b>[_1]',$section_display).'</h4>'."\n";
 
     my $result= '<table border="0"><tr><td bgcolor="#777777">'."\n";
     $result.= '<table border="0"><tr bgcolor="#deffff">'.
@@ -3354,7 +3417,7 @@ sub split_part_type {
     my ($partstr) = @_;
     my ($temp,@allparts)=split(/_/,$partstr);
     my $type=pop(@allparts);
-    my $part=join('.',@allparts);
+    my $part=join('_',@allparts);
     return ($part,$type);
 }
 
@@ -3827,7 +3890,7 @@ LISTJAVASCRIPT
 
     $result.='<form action="/adm/grades" method="post" name="displayPage">'."\n";
     $result.='&nbsp;<b>Problems from:</b> <select name="selectpage">'."\n";
-    my ($titles,$symbx) = &getSymbMap($request);
+    my ($titles,$symbx) = &getSymbMap();
     my ($curpage) =&Apache::lonnet::decode_symb($symb); 
 #    my ($curpage,$mapId) =&Apache::lonnet::decode_symb($symb); 
 #    my $type=($curpage =~ /\.(page|sequence)/);
@@ -3857,9 +3920,10 @@ LISTJAVASCRIPT
 	'<label><input type="radio" name="lastSub" value="none" /> none</label>'."\n".
 	'<label><input type="radio" name="lastSub" value="datesub" checked="checked" /> by dates and submissions</label>'."\n".
 	'<label><input type="radio" name="lastSub" value="all" /> all details</label>'."\n";
-
-    $result.='<input type="hidden" name="section"     value="'.$getsec.'" />'."\n".
-	'<input type="hidden" name="Status"  value="'.$env{'form.Status'}.'" />'."\n".
+    
+    $result.=&build_section_inputs();
+    my $stu_status = join(':',&Apache::loncommon::get_env_multiple('form.Status'));
+    $result.='<input type="hidden" name="Status"  value="'.$stu_status.'" />'."\n".
 	'<input type="hidden" name="command" value="displayPage" />'."\n".
 	'<input type="hidden" name="symb"    value="'.&Apache::lonenc::check_encrypt($symb).'" />'."\n".
 	'<input type="hidden" name="saveState" value="'.$env{'form.saveState'}.'" />'."<br />\n";
@@ -3909,7 +3973,6 @@ LISTJAVASCRIPT
 }
 
 sub getSymbMap {
-    my ($request) = @_;
     my $navmap = Apache::lonnavmaps::navmap->new();
 
     my %symbx = ();
@@ -4354,6 +4417,68 @@ sub updateGradeByPage {
 #
 #------ start of section for handling grading by page/sequence ---------
 
+=pod
+
+=head1 Bubble sheet grading routines
+
+  For this documentation:
+
+   'scanline' refers to the full line of characters
+   from the file that we are parsing that represents one entire sheet
+
+   'bubble line' refers to the data
+   representing the line of bubbles that are on the physical bubble sheet
+
+
+The overall process is that a scanned in bubble sheet data is uploaded
+into a course. When a user wants to grade, they select a
+sequence/folder of resources, a file of bubble sheet info, and pick
+one of the predefined configurations for what each scanline looks
+like.
+
+Next each scanline is checked for any errors of either 'missing
+bubbles' (it's an error because it may have been mis-scanned
+because too light bubbling), 'double bubble' (each bubble line should
+have no more that one letter picked), invalid or duplicated CODE,
+invalid student ID
+
+If the CODE option is used that determines the randomization of the
+homework problems, either way the student ID is looked up into a
+username:domain.
+
+During the validation phase the instructor can choose to skip scanlines. 
+
+After the validation phase, there are now 3 bubble sheet files
+
+  scantron_original_filename (unmodified original file)
+  scantron_corrected_filename (file where the corrected information has replaced the original information)
+  scantron_skipped_filename (contains the exact text of scanlines that where skipped)
+
+Also there is a separate hash nohist_scantrondata that contains extra
+correction information that isn't representable in the bubble sheet
+file (see &scantron_getfile() for more information)
+
+After all scanlines are either valid, marked as valid or skipped, then
+foreach line foreach problem in the picked sequence, an ssi request is
+made that simulates a user submitting their selected letter(s) against
+the homework problem.
+
+=over 4
+
+=cut
+
+
+=pod 
+
+=item defaultFormData
+
+  Returns html hidden inputs used to hold context/default values.
+
+ Arguments:
+  $symb - $symb of the current resource 
+
+=cut
+
 sub defaultFormData {
     my ($symb)=@_;
     return '
@@ -4362,10 +4487,21 @@ sub defaultFormData {
      '<input type="hidden" name="probTitle" value="'.$env{'form.probTitle'}.'" />'."\n";
 }
 
+=pod 
+
+=item getSequenceDropDown
+
+   Return html dropdown of possible sequences to grade
+ 
+ Arguments:
+   $symb - $symb of the current resource 
+
+=cut
+
 sub getSequenceDropDown {
-    my ($request,$symb)=@_;
+    my ($symb)=@_;
     my $result='<select name="selectpage">'."\n";
-    my ($titles,$symbx) = &getSymbMap($request);
+    my ($titles,$symbx) = &getSymbMap();
     my ($curpage)=&Apache::lonnet::decode_symb($symb); 
     my $ctr=0;
     foreach (@$titles) {
@@ -4379,6 +4515,15 @@ sub getSequenceDropDown {
     return $result;
 }
 
+
+=pod 
+
+=item scantron_filenames
+
+   Returns a list of the scantron files in the current course 
+
+=cut
+
 sub scantron_filenames {
     my $cdom=$env{'course.'.$env{'request.course.id'}.'.domain'};
     my $cname=$env{'course.'.$env{'request.course.id'}.'.num'};
@@ -4394,6 +4539,17 @@ sub scantron_filenames {
     return @possiblenames;
 }
 
+=pod 
+
+=item scantron_uploads
+
+   Returns  html drop-down list of scantron files in current course.
+
+ Arguments:
+   $file2grade - filename to set as selected in the dropdown
+
+=cut
+
 sub scantron_uploads {
     my ($file2grade) = @_;
     my $result=	'<select name="scantron_selectfile">';
@@ -4405,6 +4561,15 @@ sub scantron_uploads {
     return $result;
 }
 
+=pod 
+
+=item scantron_scantab
+
+  Returns html drop down of the scantron formats in the scantronformat.tab
+  file.
+
+=cut
+
 sub scantron_scantab {
     my $fh=Apache::File->new($Apache::lonnet::perlvar{'lonTabDir'}.'/scantronformat.tab');
     my $result='<select name="scantron_format">'."\n";
@@ -4419,6 +4584,15 @@ sub scantron_scantab {
     return $result;
 }
 
+=pod 
+
+=item scantron_CODElist
+
+  Returns html drop down of the saved CODE lists from current course,
+  generated from earlier printings.
+
+=cut
+
 sub scantron_CODElist {
     my $cdom = $env{'course.'.$env{'request.course.id'}.'.domain'};
     my $cnum = $env{'course.'.$env{'request.course.id'}.'.num'};
@@ -4433,23 +4607,48 @@ sub scantron_CODElist {
     return $namechoice;
 }
 
+=pod 
+
+=item scantron_CODEunique
+
+  Returns the html for "Each CODE to be used once" radio.
+
+=cut
+
 sub scantron_CODEunique {
     my $result='<span style="white-space: nowrap;">
                  <label><input type="radio" name="scantron_CODEunique"
-                        value="yes" checked="checked" /> Yes </label>
+                        value="yes" checked="checked" />'.&mt('Yes').' </label>
                 </span>
                 <span style="white-space: nowrap;">
                  <label><input type="radio" name="scantron_CODEunique"
-                        value="no" /> No </label>
+                        value="no" />'.&mt('No').' </label>
                 </span>';
     return $result;
 }
 
+=pod 
+
+=item scantron_selectphase
+
+  Generates the initial screen to start the bubble sheet process.
+  Allows for - starting a grading run.
+             - downloading existing scan data (original, corrected
+                                                or skipped info)
+
+             - uploading new scan data
+
+ Arguments:
+  $r          - The Apache request object
+  $file2grade - name of the file that contain the scanned data to score
+
+=cut
+
 sub scantron_selectphase {
     my ($r,$file2grade) = @_;
     my ($symb)=&get_symb($r);
     if (!$symb) {return '';}
-    my $sequence_selector=&getSequenceDropDown($r,$symb);
+    my $sequence_selector=&getSequenceDropDown($symb);
     my $default_form_data=&defaultFormData($symb);
     my $grading_menu_button=&show_grading_menu_form($symb);
     my $file_selector=&scantron_uploads($file2grade);
@@ -4457,8 +4656,9 @@ sub scantron_selectphase {
     my $CODE_selector=&scantron_CODElist();
     my $CODE_unique=&scantron_CODEunique();
     my $result;
-    #FIXME allow instructor to be able to download the scantron file
-    # and to upload it,
+
+    # Chunk of form to prompt for a file to grade and how:
+
     $result.= <<SCANTRONFORM;
     <table width="100%" border="0">
     <tr>
@@ -4491,7 +4691,7 @@ sub scantron_selectphase {
 	    <td> Options: </td>
             <td>
 	       <label><input type="checkbox" name="scantron_options_redo" value="redo_skipped"/> Do only previously skipped records</label> <br />
-               <label><input type="checkbox" name="scantron_options_ignore" value="ignore_corrections"/> Remove all exisiting corrections</label> <br />
+               <label><input type="checkbox" name="scantron_options_ignore" value="ignore_corrections"/> Remove all existing corrections</label> <br />
                <label><input type="checkbox" name="scantron_options_hidden" value="ignore_hidden"/> Skip hidden resources when grading</label>
 	    </td>
           </tr>
@@ -4511,6 +4711,8 @@ SCANTRONFORM
     if (&Apache::lonnet::allowed('usc',$env{'request.role.domain'}) ||
         &Apache::lonnet::allowed('usc',$env{'request.course.id'})) {
 
+	# Chunk of form to prompt for a scantron file upload.
+
         $r->print(<<SCANTRONFORM);
     <tr>
       <td bgcolor="#777777">
@@ -4556,6 +4758,10 @@ UPLOAD
     </tr>
 SCANTRONFORM
     }
+
+    # Chunk of the form that prompts to view a scoring office file,
+    # corrected file, skipped records in a file.
+
     $r->print(<<SCANTRONFORM);
     <tr>
       <form action='/adm/grades' name='scantron_download'>
@@ -4590,6 +4796,63 @@ SCANTRONFORM
     return
 }
 
+=pod
+
+=item get_scantron_config
+
+   Parse and return the scantron configuration line selected as a
+   hash of configuration file fields.
+
+ Arguments:
+    which - the name of the configuration to parse from the file.
+
+
+ Returns:
+            If the named configuration is not in the file, an empty
+            hash is returned.
+    a hash with the fields
+      name         - internal name for the this configuration setup
+      description  - text to display to operator that describes this config
+      CODElocation - if 0 or the string 'none'
+                          - no CODE exists for this config
+                     if -1 || the string 'letter'
+                          - a CODE exists for this config and is
+                            a string of letters
+                     Unsupported value (but planned for future support)
+                          if a positive integer
+                               - The CODE exists as the first n items from
+                                 the question section of the form
+                          if the string 'number'
+                               - The CODE exists for this config and is
+                                 a string of numbers
+      CODEstart   - (only matter if a CODE exists) column in the line where
+                     the CODE starts
+      CODElength  - length of the CODE
+      IDstart     - column where the student ID number starts
+      IDlength    - length of the student ID info
+      Qstart      - column where the information from the bubbled
+                    'questions' start
+      Qlength     - number of columns comprising a single bubble line from
+                    the sheet. (usually either 1 or 10)
+      Qon         - either a single character representing the character used
+                    to signal a bubble was chosen in the positional setup, or
+                    the string 'letter' if the letter of the chosen bubble is
+                    in the final, or 'number' if a number representing the
+                    chosen bubble is in the file (1->A 0->J)
+      Qoff        - the character used to represent that a bubble was
+                    left blank
+      PaperID     - if the scanning process generates a unique number for each
+                    sheet scanned the column that this ID number starts in
+      PaperIDlength - number of columns that comprise the unique ID number
+                      for the sheet of paper
+      FirstName   - column that the first name starts in
+      FirstNameLength - number of columns that the first name spans
+ 
+      LastName    - column that the last name starts in
+      LastNameLength - number of columns that the last name spans
+
+=cut
+
 sub get_scantron_config {
     my ($which) = @_;
     my $fh=Apache::File->new($Apache::lonnet::perlvar{'lonTabDir'}.'/scantronformat.tab');
@@ -4622,6 +4885,25 @@ sub get_scantron_config {
     return %config;
 }
 
+=pod 
+
+=item username_to_idmap
+
+    creates a hash keyed by student id with values of the corresponding
+    student username:domain.
+
+  Arguments:
+
+    $classlist - reference to the class list hash. This is a hash
+                 keyed by student name:domain  whose elements are references
+                 to arrays containing various chunks of information
+                 about the student. (See loncoursedata for more info).
+
+  Returns
+    %idmap - the constructed hash
+
+=cut
+
 sub username_to_idmap {
     my ($classlist)= @_;
     my %idmap;
@@ -4632,8 +4914,50 @@ sub username_to_idmap {
     return %idmap;
 }
 
+=pod
+
+=item scantron_fixup_scanline
+
+   Process a requested correction to a scanline.
+
+  Arguments:
+    $scantron_config   - hash from &get_scantron_config()
+    $scan_data         - hash of correction information 
+                          (see &scantron_getfile())
+    $line              - existing scanline
+    $whichline         - line number of the passed in scanline
+    $field             - type of change to process 
+                         (either 
+                          'ID'     -> correct the student ID number
+                          'CODE'   -> correct the CODE
+                          'answer' -> fixup the submitted answers)
+    
+   $args               - hash of additional info,
+                          - 'ID' 
+                               'newid' -> studentID to use in replacement
+                                          of existing one
+                          - 'CODE' 
+                               'CODE_ignore_dup' - set to true if duplicates
+                                                   should be ignored.
+	                       'CODE' - is new code or 'use_unfound'
+                                        if the existing unfound code should
+                                        be used as is
+                          - 'answer'
+                               'response' - new answer or 'none' if blank
+                               'question' - the bubble line to change
+
+  Returns:
+    $line - the modified scanline
+
+  Side effects: 
+    $scan_data - may be updated
+
+=cut
+
+
 sub scantron_fixup_scanline {
     my ($scantron_config,$scan_data,$line,$whichline,$field,$args)=@_;
+
     if ($field eq 'ID') {
 	if (length($args->{'newid'}) > $$scantron_config{'IDlength'}) {
 	    return ($line,1,'New value too large');
@@ -4690,6 +5014,25 @@ sub scantron_fixup_scanline {
     return $line;
 }
 
+=pod
+
+=item scan_data
+
+    Edit or look up  an item in the scan_data hash.
+
+  Arguments:
+    $scan_data  - The hash (see scantron_getfile)
+    $key        - shorthand of the key to edit (actual key is
+                  scantronfilename_key).
+    $data        - New value of the hash entry.
+    $delete      - If true, the entry is removed from the hash.
+
+  Returns:
+    The new value of the hash table field (undefined if deleted).
+
+=cut
+
+
 sub scan_data {
     my ($scan_data,$key,$value,$delete)=@_;
     my $filename=$env{'form.scantron_selectfile'};
@@ -4700,11 +5043,63 @@ sub scan_data {
     return $scan_data->{$filename.'_'.$key};
 }
 
+=pod 
+
+=item scantron_parse_scanline
+
+  Decodes a scanline from the selected scantron file
+
+ Arguments:
+    line             - The text of the scantron file line to process
+    whichline        - Line number
+    scantron_config  - Hash describing the format of the scantron lines.
+    scan_data        - Hash of extra information about the scanline
+                       (see scantron_getfile for more information)
+    just_header      - True if should not process question answers but only
+                       the stuff to the left of the answers.
+ Returns:
+   Hash containing the result of parsing the scanline
+
+   Keys are all proceeded by the string 'scantron.'
+
+       CODE    - the CODE in use for this scanline
+       useCODE - 1 if the CODE is invalid but it usage has been forced
+                 by the operator
+       CODE_ignore_dup - 1 if the CODE is a duplicated use when unique
+                            CODEs were selected, but the usage has been
+                            forced by the operator
+       ID  - student ID
+       PaperID - if used, the ID number printed on the sheet when the 
+                 paper was scanned
+       FirstName - first name from the sheet
+       LastName  - last name from the sheet
+
+     if just_header was not true these key may also exist
+
+       missingerror - a list of bubbled line numbers that had a blank bubble
+                      that is considered an error (if the operator had already
+                      okayed a blank bubble line as really being blank then
+                      that bubble line number won't appear here.
+       doubleerror  - a list of bubbled line numbers that had more than one
+                      bubble filled in and has not been corrected by the
+                      operator
+       maxquest     - the number of the last bubble line that was parsed
+
+       (<number> starts at 1)
+       <number>.answer - zero or more letters representing the selected
+                         letters from the scanline for the bubble line 
+                         <number>.
+                         if blank there was either no bubble or there where
+                         multiple bubbles, (consult the keys missingerror and
+                         doubleerror if this is an error condition)
+
+=cut
+
 sub scantron_parse_scanline {
-    my ($line,$whichline,$scantron_config,$scan_data,$justHeader)=@_;
+    my ($line,$whichline,$scantron_config,$scan_data,$just_header)=@_;
     my %record;
-    my $questions=substr($line,$$scantron_config{'Qstart'}-1);
-    my $data=substr($line,0,$$scantron_config{'Qstart'}-1);
+    my $questions=substr($line,$$scantron_config{'Qstart'}-1);  # Answers
+    my $data=substr($line,0,$$scantron_config{'Qstart'}-1);     # earlier stuff
     if (!($$scantron_config{'CODElocation'} eq 0 ||
 	  $$scantron_config{'CODElocation'} eq 'none')) {
 	if ($$scantron_config{'CODElocation'} < 0 ||
@@ -4734,7 +5129,7 @@ sub scantron_parse_scanline {
     $record{'scantron.LastName'}=
 	substr($data,$$scantron_config{'LastName'}-1,
 	       $$scantron_config{'LastNamelength'});
-    if ($justHeader) { return \%record; }
+    if ($just_header) { return \%record; }
 
     my @alphabet=('A'..'Z');
     my $questnum=0;
@@ -4807,6 +5202,24 @@ sub scantron_parse_scanline {
     return \%record;
 }
 
+=pod
+
+=item scantron_add_delay
+
+   Adds an error message that occurred during the grading phase to a
+   queue of messages to be shown after grading pass is complete
+
+ Arguments:
+   $delayqueue  - arrary ref of hash ref of error messages
+   $scanline    - the scanline that caused the error
+   $errormesage - the error message
+   $errorcode   - a numeric code for the error
+
+ Side Effects:
+   updates the $delayqueue to have a new hash ref of the error
+
+=cut
+
 sub scantron_add_delay {
     my ($delayqueue,$scanline,$errormessage,$errorcode)=@_;
     push(@$delayqueue,
@@ -4815,6 +5228,24 @@ sub scantron_add_delay {
 	 );
 }
 
+=pod
+
+=item scantron_find_student
+
+   Finds the username for the current scanline
+
+  Arguments:
+   $scantron_record - hash result from scantron_parse_scanline
+   $scan_data       - hash of correction information 
+                      (see &scantron_getfile() form more information)
+   $idmap           - hash from &username_to_idmap()
+   $line            - number of current scanline
+ 
+  Returns:
+   Either 'username:domain' or undef if unknown
+
+=cut
+
 sub scantron_find_student {
     my ($scantron_record,$scan_data,$idmap,$line)=@_;
     my $scanID=$$scantron_record{'scantron.ID'};
@@ -4829,6 +5260,15 @@ sub scantron_find_student {
     return undef;
 }
 
+=pod
+
+=item scantron_filter
+
+   Filter sub for lonnavmaps, filters out hidden resources if ignore
+   hidden resources was selected
+
+=cut
+
 sub scantron_filter {
     my ($curres)=@_;
 
@@ -4845,6 +5285,15 @@ sub scantron_filter {
     return 0;
 }
 
+=pod
+
+=item scantron_process_corrections
+
+   Gets correction information out of submitted form data and corrects
+   the scanline
+
+=cut
+
 sub scantron_process_corrections {
     my ($r) = @_;
     my %scantron_config=&get_scantron_config($env{'form.scantron_format'});
@@ -4902,12 +5351,30 @@ sub scantron_process_corrections {
     }
 }
 
+=pod
+
+=item reset_skipping_status
+
+   Forgets the current set of remember skipped scanlines (and thus
+   reverts back to considering all lines in the
+   scantron_skipped_<filename> file)
+
+=cut
+
 sub reset_skipping_status {
     my ($scanlines,$scan_data)=&scantron_getfile();
     &scan_data($scan_data,'remember_skipping',undef,1);
     &scantron_putfile(undef,$scan_data);
 }
 
+=pod
+
+=item start_skipping
+
+   Marks a scanline to be skipped. 
+
+=cut
+
 sub start_skipping {
     my ($scan_data,$i)=@_;
     my %remembered=split(':',&scan_data($scan_data,'remember_skipping'));
@@ -4919,6 +5386,14 @@ sub start_skipping {
     &scan_data($scan_data,'remember_skipping',join(':',%remembered));
 }
 
+=pod
+
+=item should_be_skipped
+
+   Checks whether a scanline should be skipped.
+
+=cut
+
 sub should_be_skipped {
     my ($scanlines,$scan_data,$i)=@_;
     if ($env{'form.scantron_options_redo'} !~ /^redo_/) {
@@ -4934,6 +5409,15 @@ sub should_be_skipped {
     return 1;
 }
 
+=pod
+
+=item remember_current_skipped
+
+   Discovers what scanlines are in the scantron_skipped_<filename>
+   file and remembers them into scan_data for later use.
+
+=cut
+
 sub remember_current_skipped {
     my ($scanlines,$scan_data)=&scantron_getfile();
     my %to_remember;
@@ -4947,6 +5431,16 @@ sub remember_current_skipped {
     &scantron_putfile(undef,$scan_data);
 }
 
+=pod
+
+=item check_for_error
+
+    Checks if there was an error when attempting to remove a specific
+    scantron_.. bubble sheet data file. Prints out an error if
+    something went wrong.
+
+=cut
+
 sub check_for_error {
     my ($r,$result)=@_;
     if ($result ne 'ok' && $result ne 'not_found' ) {
@@ -4954,6 +5448,15 @@ sub check_for_error {
     }
 }
 
+=pod
+
+=item scantron_warning_screen
+
+   Interstitial screen to make sure the operator has selected the
+   correct options before we start the validation phase.
+
+=cut
+
 sub scantron_warning_screen {
     my ($button_text)=@_;
     my $title=&Apache::lonnet::gettitle($env{'form.selectpage'});
@@ -4986,6 +5489,15 @@ $CODElist
 STUFF
 }
 
+=pod
+
+=item scantron_do_warning
+
+   Check if the operator has picked something for all required
+   fields. Error out if something is missing.
+
+=cut
+
 sub scantron_do_warning {
     my ($r)=@_;
     my ($symb)=&get_symb($r);
@@ -5017,6 +5529,14 @@ STUFF
     return '';
 }
 
+=pod
+
+=item scantron_form_start
+
+    html hidden input for remembering all selected grading options
+
+=cut
+
 sub scantron_form_start {
     my ($max_bubble)=@_;
     my $result= <<SCANTRONFORM;
@@ -5034,6 +5554,18 @@ SCANTRONFORM
     return $result;
 }
 
+=pod
+
+=item scantron_validate_file
+
+    Dispatch routine for doing validation of a bubble sheet data file.
+
+    Also processes any necessary information resets that need to
+    occur before validation begins (ignore previous corrections,
+    restarting the skipped records processing)
+
+=cut
+
 sub scantron_validate_file {
     my ($r) = @_;
     my ($symb)=&get_symb($r);
@@ -5041,7 +5573,7 @@ sub scantron_validate_file {
     my $default_form_data=&defaultFormData($symb);
     
     # do the detection of only doing skipped records first befroe we delete
-    # them  when doing the corrections reset
+    # them when doing the corrections reset
     if ($env{'form.scantron_options_redo'} ne 'redo_skipped_ready') {
 	&reset_skipping_status();
     }
@@ -5060,7 +5592,7 @@ sub scantron_validate_file {
     if ($env{'form.scantron_corrections'}) {
 	&scantron_process_corrections($r);
     }
-    $r->print("<p>Gathering neccessary info.</p>");$r->rflush();
+    $r->print("<p>Gathering necessary info.</p>");$r->rflush();
     #get the student pick code ready
     $r->print(&Apache::loncommon::studentbrowser_javascript());
     my $max_bubble=&scantron_get_maxbubble();
@@ -5117,6 +5649,17 @@ STUFF
     return '';
 }
 
+
+=pod
+
+=item scantron_remove_file
+
+   Removes the requested bubble sheet data file, makes sure that
+   scantron_original_<filename> is never removed
+
+
+=cut
+
 sub scantron_remove_file {
     my ($which)=@_;
     my $cname=$env{'course.'.$env{'request.course.id'}.'.num'};
@@ -5131,6 +5674,18 @@ sub scantron_remove_file {
     return &Apache::lonnet::removeuserfile($cname,$cdom,$file);
 }
 
+
+=pod
+
+=item scantron_remove_scan_data
+
+   Removes all scan_data correction for the requested bubble sheet
+   data file.  (In the case that both the are doing skipped records we need
+   to remember the old skipped lines for the time being so that element
+   persists for a while.)
+
+=cut
+
 sub scantron_remove_scan_data {
     my $cname=$env{'course.'.$env{'request.course.id'}.'.num'};
     my $cdom=$env{'course.'.$env{'request.course.id'}.'.domain'};
@@ -5153,6 +5708,51 @@ sub scantron_remove_scan_data {
     return $result;
 }
 
+
+=pod
+
+=item scantron_getfile
+
+    Fetches the requested bubble sheet data file (all 3 versions), and
+    the scan_data hash
+  
+  Arguments:
+    None
+
+  Returns:
+    2 hash references
+
+     - first one has 
+         orig      -
+         corrected -
+         skipped   -  each of which points to an array ref of the specified
+                      file broken up into individual lines
+         count     - number of scanlines
+ 
+     - second is the scan_data hash possible keys are
+       ($number refers to scanline numbered $number and thus the key affects
+        only that scanline
+        $bubline refers to the specific bubble line element and the aspects
+        refers to that specific bubble line element)
+
+       $number.user - username:domain to use
+       $number.CODE_ignore_dup 
+                    - ignore the duplicate CODE error 
+       $number.useCODE
+                    - use the CODE in the scanline as is
+       $number.no_bubble.$bubline
+                    - it is valid that there is no bubbled in bubble
+                      at $number $bubline
+       remember_skipping
+                    - a frozen hash containing keys of $number and values
+                      of either 
+                        1 - we are on a 'do skipped records pass' and plan
+                            on processing this line
+                        2 - we are on a 'do skipped records pass' and this
+                            scanline has been marked to skip yet again
+
+=cut
+
 sub scantron_getfile {
     #FIXME really would prefer a scantron directory
     my $cname=$env{'course.'.$env{'request.course.id'}.'.num'};
@@ -5185,6 +5785,21 @@ sub scantron_getfile {
     return (\%scanlines,\%scan_data);
 }
 
+=pod
+
+=item lonnet_putfile
+
+   Wrapper routine to call &Apache::lonnet::finishuserfileupload
+
+ Arguments:
+   $contents - data to store
+   $filename - filename to store $contents into
+
+ Returns:
+   result value from &Apache::lonnet::finishuserfileupload
+
+=cut
+
 sub lonnet_putfile {
     my ($contents,$filename)=@_;
     my $docuname=$env{'course.'.$env{'request.course.id'}.'.num'};
@@ -5194,6 +5809,22 @@ sub lonnet_putfile {
 
 }
 
+=pod
+
+=item scantron_putfile
+
+    Stores the current version of the bubble sheet data files, and the
+    scan_data hash. (Does not modify the original version only the
+    corrected and skipped versions.
+
+ Arguments:
+    $scanlines - hash ref that looks like the first return value from
+                 &scantron_getfile()
+    $scan_data - hash ref that looks like the second return value from
+                 &scantron_getfile()
+
+=cut
+
 sub scantron_putfile {
     my ($scanlines,$scan_data) = @_;
     #FIXME really would prefer a scantron directory
@@ -5214,6 +5845,28 @@ sub scantron_putfile {
     &Apache::lonnet::put('nohist_scantrondata',$scan_data,$cdom,$cname);
 }
 
+=pod
+
+=item scantron_get_line
+
+   Returns the correct version of the scanline
+
+ Arguments:
+    $scanlines - hash ref that looks like the first return value from
+                 &scantron_getfile()
+    $scan_data - hash ref that looks like the second return value from
+                 &scantron_getfile()
+    $i         - number of the requested line (starts at 0)
+
+ Returns:
+   A scanline, (either the original or the corrected one if it
+   exists), or undef if the requested scanline should be
+   skipped. (Either because it's an skipped scanline, or it's an
+   unskipped scanline and we are not doing a 'do skipped scanlines'
+   pass.
+
+=cut
+
 sub scantron_get_line {
     my ($scanlines,$scan_data,$i)=@_;
     if (&should_be_skipped($scanlines,$scan_data,$i)) { return undef; }
@@ -5222,6 +5875,23 @@ sub scantron_get_line {
     return $scanlines->{'orig'}[$i]; 
 }
 
+=pod
+
+=item scantron_todo_count
+
+    Counts the number of scanlines that need processing.
+
+ Arguments:
+    $scanlines - hash ref that looks like the first return value from
+                 &scantron_getfile()
+    $scan_data - hash ref that looks like the second return value from
+                 &scantron_getfile()
+
+ Returns:
+    $count - number of scanlines to process
+
+=cut
+
 sub get_todo_count {
     my ($scanlines,$scan_data)=@_;
     my $count=0;
@@ -5233,6 +5903,25 @@ sub get_todo_count {
     return $count;
 }
 
+=pod
+
+=item scantron_put_line
+
+    Updates the 'corrected' or 'skipped' versions of the bubble sheet
+    data file.
+
+ Arguments:
+    $scanlines - hash ref that looks like the first return value from
+                 &scantron_getfile()
+    $scan_data - hash ref that looks like the second return value from
+                 &scantron_getfile()
+    $i         - line number to update
+    $newline   - contents of the updated scanline
+    $skip      - if true make the line for skipping and update the
+                 'skipped' file
+
+=cut
+
 sub scantron_put_line {
     my ($scanlines,$scan_data,$i,$newline,$skip)=@_;
     if ($skip) {
@@ -5243,6 +5932,21 @@ sub scantron_put_line {
     $scanlines->{'corrected'}[$i]=$newline;
 }
 
+=pod
+
+=item scantron_clear_skip
+
+   Remove a line from the 'skipped' file
+
+ Arguments:
+    $scanlines - hash ref that looks like the first return value from
+                 &scantron_getfile()
+    $scan_data - hash ref that looks like the second return value from
+                 &scantron_getfile()
+    $i         - line number to update
+
+=cut
+
 sub scantron_clear_skip {
     my ($scanlines,$scan_data,$i)=@_;
     if (exists($scanlines->{'skipped'}[$i])) {
@@ -5252,6 +5956,15 @@ sub scantron_clear_skip {
     return 0;
 }
 
+=pod
+
+=item scantron_filter_not_exam
+
+   Filter routine used by &Apache::lonnavmaps::retrieveResources(), to
+   filter out resources that are not marked as 'exam' mode
+
+=cut
+
 sub scantron_filter_not_exam {
     my ($curres)=@_;
     
@@ -5268,6 +5981,15 @@ sub scantron_filter_not_exam {
     return 0;
 }
 
+=pod
+
+=item scantron_validate_sequence
+
+    Validates the selected sequence, checking for resource that are
+    not set to exam mode.
+
+=cut
+
 sub scantron_validate_sequence {
     my ($r,$currentphase) = @_;
 
@@ -5291,6 +6013,15 @@ sub scantron_validate_sequence {
     return (0,$currentphase+1);
 }
 
+=pod
+
+=item scantron_validate_ID
+
+   Validates all scanlines in the selected file to not have any
+   invalid or underspecified student IDs
+
+=cut
+
 sub scantron_validate_ID {
     my ($r,$currentphase) = @_;
     
@@ -5353,6 +6084,36 @@ sub scantron_validate_ID {
     return (0,$currentphase+1);
 }
 
+=pod
+
+=item scantron_get_correction
+
+   Builds the interface screen to interact with the operator to fix a
+   specific error condition in a specific scanline
+
+ Arguments:
+    $r           - Apache request object
+    $i           - number of the current scanline
+    $scan_record - hash ref as returned from &scantron_parse_scanline()
+    $scan_config - hash ref as returned from &get_scantron_config()
+    $line        - full contents of the current scanline
+    $error       - error condition, valid values are
+                   'incorrectCODE', 'duplicateCODE',
+                   'doublebubble', 'missingbubble',
+                   'duplicateID', 'incorrectID'
+    $arg         - extra information needed
+       For errors:
+         - duplicateID   - paper number that this studentID was seen before on
+         - duplicateCODE - array ref of the paper numbers this CODE was
+                           seen on before
+         - incorrectCODE - current incorrect CODE 
+         - doublebubble  - array ref of the bubble lines that have double
+                           bubble errors
+         - missingbubble - array ref of the bubble lines that have missing
+                           bubble errors
+
+=cut
+
 sub scantron_get_correction {
     my ($r,$i,$scan_record,$scan_config,$line,$error,$arg)=@_;
 
@@ -5456,7 +6217,8 @@ ENDSCRIPT
 	$r->print("<p>Please indicate which bubble should be used for grading</p>");
 	foreach my $question (@{$arg}) {
 	    my $selected=$$scan_record{"scantron.$question.answer"};
-	    &scantron_bubble_selector($r,$scan_config,$question,split('',$selected));
+	    &scantron_bubble_selector($r,$scan_config,$question,
+				      split('',$selected));
 	}
     } elsif ($error eq 'missingbubble') {
 	$r->print("<p>There have been <b>no</b> bubbles scanned for some question(s)</p>\n");
@@ -5476,32 +6238,99 @@ ENDSCRIPT
 
 }
 
+=pod
+
+=item scantron_bubble_selector
+  
+   Generates the html radiobuttons to correct a single bubble line
+   possibly showing the existing the selected bubbles if known
+
+ Arguments:
+    $r           - Apache request object
+    $scan_config - hash from &get_scantron_config()
+    $quest       - number of the bubble line to make a corrector for
+    $selected    - array of letters of previously selected bubbles
+    $lines       - if present, number of bubble lines to show
+
+=cut
+
 sub scantron_bubble_selector {
-    my ($r,$scan_config,$quest,@selected)=@_;
+    my ($r,$scan_config,$quest,@selected, $lines)=@_;
     my $max=$$scan_config{'Qlength'};
 
     my $scmode=$$scan_config{'Qon'};
     if ($scmode eq 'number' || $scmode eq 'letter') { $max=10; }	     
 
-    my @alphabet=('A'..'Z');
-    $r->print("<table border='1'><tr><td rowspan='2'>$quest</td>");
-    for (my $i=0;$i<$max+1;$i++) {
-	$r->print("\n".'<td align="center">');
-	if ($selected[0] eq $alphabet[$i]) { $r->print('X'); shift(@selected) }
-	else { $r->print('&nbsp;'); }
-	$r->print('</td>');
-    }
-    $r->print('</tr><tr>');
-    for (my $i=0;$i<$max;$i++) {
-	$r->print("\n".
-		  '<td><label><input type="radio" name="scantron_correct_Q_'.
-		  $quest.'" value="'.$i.'" />'.$alphabet[$i]."</label></td>");
+
+    if (!defined($lines)) {
+	$lines = 1;
     }
-    $r->print('<td><label><input type="radio" name="scantron_correct_Q_'.
+    my $total_lines = $lines*2;
+    my @alphabet=('A'..'Z');
+    $r->print("<table border='1'><tr><td rowspan='".$total_lines."'>$quest</td>");
+
+    for (my $l = 0; $l < $lines; $l++) {
+	if ($l != 0) {
+	    $r->print('<tr>');
+	}
+
+	# FIXME:  This loop probably has to be considerably more clever for
+	#  multiline bubbles: User can multibubble by having bubbles in
+	#  several lines.  User can skip lines legitimately etc. etc.
+
+	for (my $i=0;$i<$max;$i++) {
+	    $r->print("\n".'<td align="center">');
+	    if ($selected[0] eq $alphabet[$i]) { 
+		$r->print('X'); 
+		shift(@selected) ;
+	    } else { 
+		$r->print('&nbsp;'); 
+	    }
+	    $r->print('</td>');
+	    
+	}
+
+	if ($l == 0) {
+	    my $lspan = $total_lines * 2;   #  2 table rows per bubble line.
+
+	    $r->print('<td rowspan='.$lspan.'><label><input type="radio" name="scantron_correct_Q_'.
 	      $quest.'" value="none" /> No bubble </label></td>');
-    $r->print('</tr></table>');
+	
+	}
+
+	$r->print('</tr><tr>');
+
+	# FIXME: This may have to be a bit more clever for
+	#        multiline questions (different values e.g..).
+
+	for (my $i=0;$i<$max;$i++) {
+	    $r->print("\n".
+		      '<td><label><input type="radio" name="scantron_correct_Q_'.
+		      $quest.'" value="'.$i.'" />'.$alphabet[$i]."</label></td>");
+	}
+	$r->print('</tr>');
+
+	    
+    }
+    $r->print('</table>');
 }
 
+=pod
+
+=item num_matches
+
+   Counts the number of characters that are the same between the two arguments.
+
+ Arguments:
+   $orig - CODE from the scanline
+   $code - CODE to match against
+
+ Returns:
+   $count - integer count of the number of same characters between the
+            two arguments
+
+=cut
+
 sub num_matches {
     my ($orig,$code) = @_;
     my @code=split(//,$code);
@@ -5513,6 +6342,26 @@ sub num_matches {
     return $same;
 }
 
+=pod
+
+=item scantron_get_closely_matching_CODEs
+
+   Cycles through all CODEs and finds the set that has the greatest
+   number of same characters as the provided CODE
+
+ Arguments:
+   $allcodes - hash ref returned by &get_codes()
+   $CODE     - CODE from the current scanline
+
+ Returns:
+   2 element list
+    - first elements is number of how closely matching the best fit is 
+      (5 means best set has 5 matching characters)
+    - second element is an arrary ref containing the set of valid CODEs
+      that best fit the passed in CODE
+
+=cut
+
 sub scantron_get_closely_matching_CODEs {
     my ($allcodes,$CODE)=@_;
     my @CODEs;
@@ -5523,6 +6372,23 @@ sub scantron_get_closely_matching_CODEs
     return ($#CODEs,$CODEs[-1]);
 }
 
+=pod
+
+=item get_codes
+
+   Builds a hash which has keys of all of the valid CODEs from the selected
+   set of remembered CODEs.
+
+ Arguments:
+  $old_name - name of the set of remembered CODEs
+  $cdom     - domain of the course
+  $cnum     - internal course name
+
+ Returns:
+  %allcodes - keys are the valid CODEs, values are all 1
+
+=cut
+
 sub get_codes {
     my ($old_name, $cdom, $cnum) = @_;
     if (!$old_name) {
@@ -5545,6 +6411,16 @@ sub get_codes {
     return %allcodes;
 }
 
+=pod
+
+=item scantron_validate_CODE
+
+   Validates all scanlines in the selected file to not have any
+   invalid or underspecified CODEs and that none of the codes are
+   duplicated if this was requested.
+
+=cut
+
 sub scantron_validate_CODE {
     my ($r,$currentphase) = @_;
     my %scantron_config=&get_scantron_config($env{'form.scantron_format'});
@@ -5596,6 +6472,15 @@ sub scantron_validate_CODE {
     return (0,$currentphase+1);
 }
 
+=pod
+
+=item scantron_validate_doublebubble
+
+   Validates all scanlines in the selected file to not have any
+   bubble lines with multiple bubbles marked.
+
+=cut
+
 sub scantron_validate_doublebubble {
     my ($r,$currentphase) = @_;
     #get student info
@@ -5619,7 +6504,21 @@ sub scantron_validate_doublebubble {
     return (0,$currentphase+1);
 }
 
+=pod
+
+=item scantron_get_maxbubble
+
+   Returns the maximum number of bubble lines that are expected to
+   occur. Does this by walking the selected sequence rendering the
+   resource and then checking &Apache::lonxml::get_problem_counter()
+   for what the current value of the problem counter is.
+
+   Caches the result to $env{'form.scantron_maxbubble'}
+
+=cut
+
 sub scantron_get_maxbubble {    
+
     if (defined($env{'form.scantron_maxbubble'}) &&
 	$env{'form.scantron_maxbubble'}) {
 	return $env{'form.scantron_maxbubble'};
@@ -5634,17 +6533,52 @@ sub scantron_get_maxbubble {
 
     &Apache::lonxml::clear_problem_counter();
 
+    my $uname       = $env{'form.student'};
+    my $udom        = $env{'form.userdom'};
+    my $cid         = $env{'request.course.id'};
+    my $total_lines = 0;
+    %bubble_lines_per_response = ();
+
     foreach my $resource (@resources) {
+	my $symb = $resource->symb();
 	my $result=&Apache::lonnet::ssi($resource->src(),
-					('symb' => $resource->symb()));
+					('symb' => $resource->symb()),
+					('grade_target' => 'analyze'),
+					('grade_courseid' => $cid),
+					('grade_domain' => $udom),
+					('grade_username' => $uname));
+	my (undef, $an) =
+	    split(/_HASH_REF__/,$result, 2);
+
+	my %analysis = &Apache::lonnet::str2hash($an);
+
+
+
+	foreach my $part_id (@{$analysis{'parts'}}) {
+	    my $bubble_lines = $analysis{"$part_id.bubble_lines"}[0];
+	    if (!$bubble_lines) {
+		$bubble_lines = 1;
+	    }
+	    $bubble_lines_per_response{"$symb.$part_id"} = $bubble_lines;
+	    $total_lines = $total_lines + $bubble_lines;
+	}
+
     }
     &Apache::lonnet::delenv('scantron\.');
     $env{'form.scantron_maxbubble'} =
-	&Apache::lonxml::get_problem_counter()-1;
-
+	$total_lines;
     return $env{'form.scantron_maxbubble'};
 }
 
+=pod
+
+=item scantron_validate_missingbubbles
+
+   Validates all scanlines in the selected file to not have any
+   bubble lines with missing bubbles that haven't been verified as missing.
+
+=cut
+
 sub scantron_validate_missingbubbles {
     my ($r,$currentphase) = @_;
     #get student info
@@ -5677,6 +6611,30 @@ sub scantron_validate_missingbubbles {
     return (0,$currentphase+1);
 }
 
+=pod
+
+=item scantron_process_students
+
+   Routine that does the actual grading of the bubble sheet information.
+
+   The parsed scanline hash is added to %env 
+
+   Then foreach unskipped scanline it does an &Apache::lonnet::ssi()
+   foreach resource , with the form data of
+
+	'submitted'     =>'scantron' 
+	'grade_target'  =>'grade',
+	'grade_username'=> username of student
+	'grade_domain'  => domain of student
+	'grade_courseid'=> of course
+	'grade_symb'    => symb of resource to grade
+
+    This triggers a grading pass. The problem grading code takes care
+    of converting the bubbled letter information (now in %env) into a
+    valid submission.
+
+=cut
+
 sub scantron_process_students {
     my ($r) = @_;
     my (undef,undef,$sequence)=&Apache::lonnet::decode_symb($env{'form.selectpage'});
@@ -5781,6 +6739,14 @@ SCANTRONFORM
     return '';
 }
 
+=pod
+
+=item scantron_upload_scantron_data
+
+    Creates the screen for adding a new bubble sheet data file to a course.
+
+=cut
+
 sub scantron_upload_scantron_data {
     my ($r)=@_;
     $r->print(&Apache::loncommon::coursebrowser_javascript($env{'request.role.domain'}));
@@ -5817,6 +6783,15 @@ UPLOAD
     return '';
 }
 
+=pod
+
+=item scantron_upload_scantron_data_save
+
+   Adds a provided bubble information data file to the course if user
+   has the correct privileges to do so.  
+
+=cut
+
 sub scantron_upload_scantron_data_save {
     my($r)=@_;
     my ($symb)=&get_symb($r,1);
@@ -5872,6 +6847,14 @@ sub scantron_upload_scantron_data_save {
     return '';
 }
 
+=pod
+
+=item valid_file
+
+   Validates that the requested bubble data file exists in the course.
+
+=cut
+
 sub valid_file {
     my ($requested_file)=@_;
     foreach my $filename (sort(&scantron_filenames())) {
@@ -5880,6 +6863,16 @@ sub valid_file {
     return 0;
 }
 
+=pod
+
+=item scantron_download_scantron_data
+
+   Shows a list of the three internal files (original, corrected,
+   skipped) for a specific bubble sheet data file that exists in the
+   course.
+
+=cut
+
 sub scantron_download_scantron_data {
     my ($r)=@_;
     my $default_form_data=&defaultFormData(&get_symb($r,1));
@@ -5916,6 +6909,12 @@ DOWNLOAD
     return '';
 }
 
+=pod
+
+=back
+
+=cut
+
 #-------- end of section for handling grading scantron forms -------
 #
 #-------------------------------------------------------------------
@@ -6015,8 +7014,13 @@ GRADINGMENUJS
 	'<tr bgcolor="#ffffe6" valign="top"><td>'."\n";
 
     $result.='<table width="100%" border="0">';
+    $result.='<tr bgcolor="#ffffe6" valign="top">'."\n";
+    $result.='<td><b>'.&mt('Sections').'</b></td>';
+#    $result.='<td>Groups</td>';
+    $result.='<td><b>'.&mt('Access Status').'</td>'."\n";
+    $result.='</tr>';
     $result.='<tr bgcolor="#ffffe6" valign="top"><td>'."\n".
-	'&nbsp;'.&mt('Select Section').': <select name="section">'."\n";
+	'&nbsp;<select name="section" multiple="multiple" size="3">'."\n";
     if (ref($sections)) {
 	foreach (sort (@$sections)) {
 	    $result.='<option value="'.$_.'" '.
@@ -6024,12 +7028,14 @@ GRADINGMENUJS
 	}
     }
     $result.= '<option value="all" '.($saveSec eq 'all' ? 'selected="selected"' : ''). '>all</option></select> &nbsp; ';
-
-    $result.=&mt('Student Status').':'.&Apache::lonhtmlcommon::StatusOptions($saveStatus,undef,1,undef);
+#    $result.= '</td><td>'."\n";
+#    $result.='Put group select here'."\n";
+    $result.='</td><td>'."\n";
+    $result.=&Apache::lonhtmlcommon::StatusOptions($saveStatus,undef,3,undef,'mult');
 
     $result.='</td></tr>';
 
-    $result.='<tr bgcolor="#ffffe6"valign="top"><td><label>'.
+    $result.='<tr bgcolor="#ffffe6"valign="top"><td colspan="3"><label>'.
 	'<input type="radio" name="radioChoice" value="submission" '.
 	($saveCmd eq 'submission' ? 'checked="checked"' : '').' /> '.'<b>'.&mt('Current Resource').':</b> '.&mt('For one or more students').
 	'</label> <select name="submitonly">'.
@@ -6044,17 +7050,17 @@ GRADINGMENUJS
 	'<option value="all" '.
 	($saveSub eq 'all' ? 'selected="selected"' : '').'>'.&mt('with any status').'</option></select></td></tr>'."\n";
 
-    $result.='<tr bgcolor="#ffffe6"valign="top"><td>'.
+    $result.='<tr bgcolor="#ffffe6"valign="top"><td colspan="2">'.
 	'<label><input type="radio" name="radioChoice" value="viewgrades" '.
 	($saveCmd eq 'viewgrades' ? 'checked="checked"' : '').' /> '.
 	'<b>Current Resource:</b> For all students in selected section or course</label></td></tr>'."\n";
 
-    $result.='<tr bgcolor="#ffffe6" valign="top"><td>'.
+    $result.='<tr bgcolor="#ffffe6" valign="top"><td colspan="2">'.
 	'<label><input type="radio" name="radioChoice" value="pickStudentPage" '.
 	($saveCmd eq 'pickStudentPage' ? 'checked="checked"' : '').' /> '.
 	'The <b>complete</b> set/page/sequence: For one student</label></td></tr>'."\n";
 
-    $result.='<tr bgcolor="#ffffe6"><td><br />'.
+    $result.='<tr bgcolor="#ffffe6"><td colspan="2"><br />'.
 	'<input type="button" onClick="javascript:checkChoice(this.form,\'2\');" value="Next->" />'.
 	'</td></tr></table>'."\n";
 
@@ -6124,15 +7130,17 @@ sub gather_clicker_ids {
     # Set up a couple variables.
     my $username_idx = &Apache::loncoursedata::CL_SNAME();
     my $domain_idx   = &Apache::loncoursedata::CL_SDOM();
+    my $status_idx   = &Apache::loncoursedata::CL_STATUS();
 
     foreach my $student (keys(%$classlist)) {
-
+        if ($classlist->{$student}->[$status_idx] ne 'Active') { next; }
         my $username = $classlist->{$student}->[$username_idx];
         my $domain   = $classlist->{$student}->[$domain_idx];
         my $clickers =
 	    (&Apache::lonnet::userenvironment($domain,$username,'clickers'))[1];
         foreach my $id (split(/\,/,$clickers)) {
             $id=~s/^[\#0]+//;
+            $id=~s/[\-\:]//g;
             if (exists($clicker_ids{$id})) {
 		$clicker_ids{$id}.=','.$username.':'.$domain;
             } else {
@@ -6155,6 +7163,7 @@ sub gather_adv_clicker_ids {
 		(&Apache::lonnet::userenvironment($pudom,$puname,'clickers'))[1];
             foreach my $id (split(/\,/,$clickers)) {
 		$id=~s/^[\#0]+//;
+                $id=~s/[\-\:]//g;
 		if (exists($clicker_ids{$id})) {
 		    $clicker_ids{$id}.=','.$puname.':'.$pudom;
 		} else {
@@ -6211,7 +7220,8 @@ sub process_clicker {
     my $pcorrect=&mt("Percentage points for correct solution");
     my $pincorrect=&mt("Percentage points for incorrect solution");
     my $selectform=&Apache::loncommon::select_form($env{'form.upfiletype'},'upfiletype',
-						   ('iclicker' => 'i>clicker'));
+						   ('iclicker' => 'i>clicker',
+                                                    'interwrite' => 'interwrite PRS'));
     $symb = &Apache::lonenc::check_encrypt($symb);
     $result.=<<ENDUPFORM;
 <script type="text/javascript">
@@ -6300,6 +7310,7 @@ sub process_clicker_file {
 	   $correct_id=~tr/a-z/A-Z/;
 	   $correct_id=~s/\s//gs;
 	   $correct_id=~s/^[\#0]+//;
+           $correct_id=~s/[\-\:]//g;
            if ($correct_id) {
 	      $correct_ids{$correct_id}='specified';
            }
@@ -6359,6 +7370,9 @@ ENDHEADER
     if ($env{'form.upfiletype'} eq 'iclicker') {
 	($errormsg,$number)=&iclicker_eval(\@questiontitles,\%responses);
     }
+    if ($env{'form.upfiletype'} eq 'interwrite') {
+        ($errormsg,$number)=&interwrite_eval(\@questiontitles,\%responses);
+    }
     $result.='<br />'.&mt('Found [_1] question(s)',$number).'<br />'.
              '<input type="hidden" name="number" value="'.$number.'" />'.
              &mt('Awarding [_1] percent for correct and [_2] percent for incorrect responses',
@@ -6380,8 +7394,21 @@ ENDHEADER
           $result.="\n".'<input type="hidden" name="correct:'.$correct_count.':'.$correct_ids{$id}.'" value="'.$responses{$id}.'" />';
           $correct_count++;
        } elsif ($clicker_ids{$id}) {
-          $result.="\n".'<input type="hidden" name="student:'.$clicker_ids{$id}.'" value="'.$responses{$id}.'" />';
-          $student_count++;
+          if ($clicker_ids{$id}=~/\,/) {
+# More than one user with the same clicker!
+             $result.="\n<hr />".&mt('Clicker registered more than once').": <tt>".$id."</tt><br />";
+             $result.="\n".'<input type="hidden" name="unknown:'.$id.'" value="'.$responses{$id}.'" />'.
+                           "<select name='multi".$id."'>";
+             foreach my $reguser (sort(split(/\,/,$clicker_ids{$id}))) {
+                 $result.="<option value='".$reguser."'>".&Apache::loncommon::plainname(split(/\:/,$reguser)).' ('.$reguser.')</option>';
+             }
+             $result.='</select>';
+             $unknown_count++;
+          } else {
+# Good: found one and only one user with the right clicker
+             $result.="\n".'<input type="hidden" name="student:'.$clicker_ids{$id}.'" value="'.$responses{$id}.'" />';
+             $student_count++;
+          }
        } else {
           $result.="\n<hr />".&mt('Unregistered Clicker')." <tt>".$id."</tt><br />";
           $result.="\n".'<input type="hidden" name="unknown:'.$id.'" value="'.$responses{$id}.'" />'.
@@ -6401,6 +7428,9 @@ ENDHEADER
           $result.='<br /><span class="LC_warning">'.&mt("Found [_1] entries for grading!",$correct_count).'</span>';
        }
     }
+    if ($number<1) {
+       $errormsg.="Found no questions.";
+    }
     if ($errormsg) {
        $result.='<br /><span class="LC_error">'.&mt($errormsg).'</span>';
     } else {
@@ -6438,6 +7468,37 @@ sub iclicker_eval {
     return ($errormsg,$number);
 }
 
+sub interwrite_eval {
+    my ($questiontitles,$responses)=@_;
+    my $number=0;
+    my $errormsg='';
+    my $skipline=1;
+    my $questionnumber=0;
+    my %idresponses=();
+    foreach my $line (split(/[\n\r]/,$env{'form.upfile'})) {
+        my %components=&Apache::loncommon::record_sep($line);
+        my @entries=map {$components{$_}} (sort(keys(%components)));
+        if ($entries[1] eq 'Time') { $skipline=0; next; }
+        if ($entries[1] eq 'Response') { $skipline=1; }
+        next if $skipline;
+        if ($entries[0]!=$questionnumber) {
+           $questionnumber=$entries[0];
+           $$questiontitles[$number]=&mt('Question [_1]',$questionnumber);
+           $number++;
+        }
+        my $id=$entries[4];
+        $id=~s/^[\#0]+//;
+        $id=~s/^v\d*\://i;
+        $id=~s/[\-\:]//g;
+        $idresponses{$id}[$number]=$entries[6];
+    }
+    foreach my $id (keys %idresponses) {
+       $$responses{$id}=join(',',@{$idresponses{$id}});
+       $$responses{$id}=~s/^\s*\,//;
+    }
+    return ($errormsg,$number);
+}
+
 sub assign_clicker_grades {
     my ($r)=@_;
     my ($symb)=&get_symb($r);
@@ -6490,8 +7551,19 @@ ENDHEADER
     my $pincorrect=$env{'form.pincorrect'};
     my $storecount=0;
     foreach my $key (keys(%env)) {
+       my $user='';
        if ($key=~/^form\.student\:(.*)$/) {
-          my $user=$1;
+          $user=$1;
+       }
+       if ($key=~/^form\.unknown\:(.*)$/) {
+          my $id=$1;
+          if (($env{'form.uname'.$id}) && ($env{'form.udom'.$id})) {
+             $user=$env{'form.uname'.$id}.':'.$env{'form.udom'.$id};
+          } elsif ($env{'form.multi'.$id}) {
+             $user=$env{'form.multi'.$id};
+          }
+       }
+       if ($user) { 
           my @answer=split(/\,/,$env{$key});
           my $sum=0;
           for (my $i=0;$i<$number;$i++) {
@@ -6534,7 +7606,7 @@ ENDHEADER
 sub handler {
     my $request=$_[0];
 
-    &reset_perm();
+    &reset_caches();
     if ($env{'browser.mathml'}) {
 	&Apache::loncommon::content_type($request,'text/xml');
     } else {
@@ -6647,6 +7719,7 @@ sub handler {
 	}
     }
     $request->print(&Apache::loncommon::end_page());
+    &reset_caches();
     return '';
 }