--- loncom/homework/grades.pm 2007/11/13 11:06:54 1.490 +++ loncom/homework/grades.pm 2007/11/16 07:56:15 1.492 @@ -1,7 +1,7 @@ # The LearningOnline Network with CAPA # The LON-CAPA Grading handler # -# $Id: grades.pm,v 1.490 2007/11/13 11:06:54 foxr Exp $ +# $Id: grades.pm,v 1.492 2007/11/16 07:56:15 albertel Exp $ # # Copyright Michigan State University Board of Trustees # @@ -4909,35 +4909,35 @@ sub scantron_selectphase { '.&Apache::loncommon::start_data_table('LC_scantron_action').' '.&Apache::loncommon::start_data_table_header_row().' -  Specify file and which Folder/Sequence to grade +  '.&mt('Specify file and which Folder/Sequence to grade').' '.&Apache::loncommon::end_data_table_header_row().' '.&Apache::loncommon::start_data_table_row().' - Sequence to grade: '.$sequence_selector.' + '.&mt('Sequence to grade:').' '.$sequence_selector.' '.&Apache::loncommon::end_data_table_row().' '.&Apache::loncommon::start_data_table_row().' - Filename of scoring office file: '.$file_selector.' + '.&mt('Filename of scoring office file:').' '.$file_selector.' '.&Apache::loncommon::end_data_table_row().' '.&Apache::loncommon::start_data_table_row().' - Format of data file: '.$format_selector.' + '.&mt('Format of data file:').' '.$format_selector.' '.&Apache::loncommon::end_data_table_row().' '.&Apache::loncommon::start_data_table_row().' - Saved CODEs to validate against: '.$CODE_selector.' + '.&mt('Saved CODEs to validate against:').' '.$CODE_selector.' '.&Apache::loncommon::end_data_table_row().' '.&Apache::loncommon::start_data_table_row().' - Each CODE is only to be used once: '.$CODE_unique.' + '.&mt('Each CODE is only to be used once:').' '.$CODE_unique.' '.&Apache::loncommon::end_data_table_row().' '.&Apache::loncommon::start_data_table_row().' - Options: + '.&mt('Options:').' -
-
- +
+
+ '.&Apache::loncommon::end_data_table_row().' '.&Apache::loncommon::start_data_table_row().' - + '.&Apache::loncommon::end_data_table_row().' '.&Apache::loncommon::end_data_table().' @@ -4956,7 +4956,7 @@ sub scantron_selectphase { '.&Apache::loncommon::start_data_table('LC_scantron_action').' '.&Apache::loncommon::start_data_table_header_row().' -  Specify a Scantron data file to upload. +  '.&mt('Specify a Scantron data file to upload.').' '.&Apache::loncommon::end_data_table_header_row().' '.&Apache::loncommon::start_data_table_row().' @@ -4965,27 +4965,27 @@ sub scantron_selectphase { my $default_form_data=&defaultFormData(&get_symb($r,1)); my $cdom= $env{'course.'.$env{'request.course.id'}.'.domain'}; my $cnum= $env{'course.'.$env{'request.course.id'}.'.num'}; - $r->print(<print(' -
- $default_form_data - - - - File to upload: + + '.$default_form_data.' + + + + '.&mt('File to upload: [_1]','').'
- +
-UPLOAD +'); $r->print(' @@ -5005,13 +5005,13 @@ UPLOAD '.&Apache::loncommon::start_data_table('LC_scantron_action').' '.&Apache::loncommon::start_data_table_header_row().' -  Download a scoring office file +  '.&mt('Download a scoring office file').' '.&Apache::loncommon::end_data_table_header_row().' '.&Apache::loncommon::start_data_table_row().' - Filename of scoring office file: '.$file_selector.' + '.&mt('Filename of scoring office file: [_1]',$file_selector).'
- + '.&Apache::loncommon::end_data_table_row().' '.&Apache::loncommon::end_data_table().' @@ -5807,7 +5807,7 @@ sub remember_current_skipped { sub check_for_error { my ($r,$result)=@_; if ($result ne 'ok' && $result ne 'not_found' ) { - $r->print("An error occurred ($result) when trying to Remove the existing corrections."); + $r->print(&mt("An error occurred ([_1]) when trying to remove the existing corrections.",$result)); } } @@ -5831,25 +5831,25 @@ sub scantron_warning_screen { $CODElist=$env{'form.scantron_CODElist'}; if ($env{'form.scantron_CODElist'} eq '') { $CODElist='None'; } $CODElist= - 'List of CODES to validate against:'. + ''.&mt('List of CODES to validate against:').''. $env{'form.scantron_CODElist'}.''; } - return (< -Please double check the information - below before clicking on '$button_text' + +'.&mt('Please double check the information below before clicking on \'[_1]\'',&mt($button_text)).'

- - -$CODElist + + +'.$CODElist.'
Sequence to be Graded:$title
Data File that will be used:$env{'form.scantron_selectfile'}
'.&mt('Sequence to be Graded:').''.$title.'
'.&mt('Data File that will be used:').''.$env{'form.scantron_selectfile'}.'

-

If this information is correct, please click on '$button_text'.

-

If something is incorrect, please click the 'Grading Menu' button to start over.

+

'.&mt('If this information is correct, please click on \'[_1]\'.',&mt($button_text)).'

+

'.&mt('If something is incorrect, please click the \'Grading Menu\' button to start over.').'


-STUFF +'); } =pod @@ -5870,23 +5870,23 @@ sub scantron_do_warning { if ( $env{'form.selectpage'} eq '' || $env{'form.scantron_selectfile'} eq '' || $env{'form.scantron_format'} eq '' ) { - $r->print("

You have forgetten to specify some information. Please go Back and try again.

"); + $r->print("

".&mt('You have forgetten to specify some information. Please go Back and try again.')."

"); if ( $env{'form.selectpage'} eq '') { - $r->print('

You have not selected a Sequence to grade

'); + $r->print('

'.&mt('You have not selected a Sequence to grade').'

'); } if ( $env{'form.scantron_selectfile'} eq '') { - $r->print('

You have not selected a file that contains the student\'s response data.

'); + $r->print('

'.&mt('You have not selected a file that contains the student\'s response data.').'

'); } if ( $env{'form.scantron_format'} eq '') { - $r->print('

You have not selected a the format of the student\'s response data.

'); + $r->print('

'.&mt('You have not selected a the format of the student\'s response data.').'

'); } } else { my $warning=&scantron_warning_screen('Grading: Validate Records'); - $r->print(< + $r->print(' +'.$warning.' + -STUFF +'); } $r->print("
".&show_grading_menu_form($symb)); return ''; @@ -5965,7 +5965,7 @@ sub scantron_validate_file { if ($env{'form.scantron_corrections'}) { &scantron_process_corrections($r); } - $r->print("

Gathering necessary info.

");$r->rflush(); + $r->print('

'.&mt('Gathering necessary info.').'

');$r->rflush(); #get the student pick code ready $r->print(&Apache::loncommon::studentbrowser_javascript()); my $max_bubble=&scantron_get_maxbubble(); @@ -5985,7 +5985,7 @@ sub scantron_validate_file { my $stop=0; while (!$stop && $currentphase < scalar(@validate_phases)) { - $r->print("

Validating ".$validate_phases[$currentphase]."

"); + $r->print('

'.&mt('Validating '.$validate_phases[$currentphase]).'

'); $r->rflush(); my $which="scantron_validate_".$validate_phases[$currentphase]; { @@ -5995,12 +5995,12 @@ sub scantron_validate_file { } if (!$stop) { my $warning=&scantron_warning_screen('Start Grading'); - $r->print(< -$warning - + $r->print(' +'.&mt('Validation process complete.').'
+'.$warning.' + -STUFF +'); } else { $r->print(''); @@ -6008,15 +6008,15 @@ STUFF } if ($stop) { if ($validate_phases[$currentphase] eq 'sequence') { - $r->print(''); - $r->print(' this error
'); + $r->print(''); + $r->print(' '.&mt('this error').'
'); - $r->print("

Or click the 'Grading Menu' button to start over.

"); + $r->print("

".&mt("Or click the 'Grading Menu' button to start over.")."

"); } else { - $r->print(''); - $r->print(' using corrected info
'); - $r->print(""); - $r->print(" this scanline saving it for later."); + $r->print(''); + $r->print(' '.&mt('using corrected info').'
'); + $r->print(""); + $r->print(" ".&mt("this scanline saving it for later.")); } } $r->print("
".&show_grading_menu_form($symb)); @@ -6077,7 +6077,10 @@ sub scantron_remove_scan_data { } my $result; if (@todelete) { - $result=&Apache::lonnet::del('nohist_scantrondata',\@todelete,$cdom,$cname); + $result = &Apache::lonnet::del('nohist_scantrondata', + \@todelete,$cdom,$cname); + } else { + $result = 'ok'; } return $result; } @@ -6497,30 +6500,32 @@ sub scantron_get_correction { #to show both the current line and the previous one and allow skipping #the previous one or the current one - $r->print("

An error was detected ($error)"); if ( $$scan_record{'scantron.PaperID'} =~ /\S/) { - $r->print(" for PaperID ". - $$scan_record{'scantron.PaperID'}." \n"); + $r->print("

".&mt("An error was detected ($error)". + " for PaperID [_1]", + $$scan_record{'scantron.PaperID'})."

\n"); } else { - $r->print(" in scanline $i
".
-		  $line."
\n"); - } - my $message="

The ID on the form is ". - $$scan_record{'scantron.ID'}."
\n". - "The name on the paper is ". - $$scan_record{'scantron.LastName'}.",". - $$scan_record{'scantron.FirstName'}."

"; + $r->print("

".&mt("An error was detected ($error)". + " in scanline [_1]

[_2]
", + $i,$line)."

\n"); + } + my $message="

".&mt("The ID on the form is [_1]
". + "The name on the paper is [_2],[_3]", + $$scan_record{'scantron.ID'}, + $$scan_record{'scantron.LastName'}, + $$scan_record{'scantron.FirstName'})."

"; $r->print(''."\n"); $r->print(''."\n"); if ($error =~ /ID$/) { if ($error eq 'incorrectID') { - $r->print("The encoded ID is not in the classlist

\n"); + $r->print("

".&mt("The encoded ID is not in the classlist"). + "

\n"); } elsif ($error eq 'duplicateID') { - $r->print("The encoded ID has also been used by a previous paper $arg

\n"); + $r->print("

".&mt("The encoded ID has also been used by a previous paper [_1]",$arg)."

\n"); } $r->print($message); - $r->print("

How should I handle this?
\n"); + $r->print("

".&mt("How should I handle this?")."
\n"); $r->print("\n

  • "); #FIXME it would be nice if this sent back the user ID and #could do partial userID matches @@ -6533,14 +6538,14 @@ sub scantron_get_correction { $r->print('
  • '); } elsif ($error =~ /CODE$/) { if ($error eq 'incorrectCODE') { - $r->print("

    The encoded CODE is not in the list of possible CODEs

    \n"); + $r->print("

    ".&mt("The encoded CODE is not in the list of possible CODEs.")."

    \n"); } elsif ($error eq 'duplicateCODE') { - $r->print("

    The encoded CODE has also been used by a previous paper ".join(', ',@{$arg}).", and CODEs are supposed to be unique

    \n"); + $r->print("

    ".&mt("The encoded CODE has also been used by a previous paper [_1], and CODEs are supposed to be unique.",join(', ',@{$arg}))."

    \n"); } - $r->print("

    The CODE on the form is '". - $$scan_record{'scantron.CODE'}."'
    \n"); + $r->print("

    ".&mt("The CODE on the form is '[_1]'", + $$scan_record{'scantron.CODE'})."
    \n"); $r->print($message); - $r->print("

    How should I handle this?
    \n"); + $r->print("

    ".&mt("How should I handle this?")."
    \n"); $r->print("\n
    "); my $i=0; if ($error eq 'incorrectCODE' @@ -6550,7 +6555,13 @@ sub scantron_get_correction { foreach my $testcode (@{$closest}) { my $checked=''; if (!$i) { $checked=' checked="checked" '; } - $r->print(""); + $r->print(" + + "); $r->print("\n
    "); $i++; } @@ -6558,7 +6569,12 @@ sub scantron_get_correction { } if ($$scan_record{'scantron.CODE'}=~/\S/ ) { my $checked; if (!$i) { $checked=' checked="checked" '; } - $r->print(""); + $r->print(" + "); $r->print("\n
    "); } @@ -6580,17 +6596,27 @@ ENDSCRIPT "&curCODE=".&escape($$scan_record{'scantron.CODE'}). "&scantron_selectfile=".&escape($env{'form.scantron_selectfile'}); if ($env{'form.scantron_CODElist'} =~ /\S/) { - $r->print(" Selected CODE is "); + $r->print(" + + ".&mt("Selected CODE is [_1]","")); $r->print("\n
    "); } - $r->print(" as the CODE."); + $r->print(" + ")); $r->print("\n

    "); } elsif ($error eq 'doublebubble') { - $r->print("

    There have been multiple bubbles scanned for a some question(s)

    \n"); + $r->print("

    ".&mt("There have been multiple bubbles scanned for a some question(s)")."

    \n"); $r->print(''); $r->print($message); - $r->print("

    Please indicate which bubble should be used for grading

    "); + $r->print("

    ".&mt("Please indicate which bubble should be used for grading")."

    "); foreach my $question (@{$arg}) { my $selected = &get_response_bubbles($scan_record, $question); my @select_array = split(/:/,$selected); @@ -6598,10 +6624,10 @@ ENDSCRIPT @select_array); } } elsif ($error eq 'missingbubble') { - $r->print("

    There have been no bubbles scanned for some question(s)

    \n"); + $r->print("

    ".&mt("There have been no bubbles scanned for some question(s)")."

    \n"); $r->print($message); - $r->print("

    Please indicate which bubble should be used for grading

    "); - $r->print("Some questions have no scanned bubbles\n"); + $r->print("

    ".&mt("Please indicate which bubble should be used for grading.")."

    "); + $r->print(&mt("Some questions have no scanned bubbles")."\n"); $r->print(''); foreach my $question (@{$arg}) { @@ -6672,7 +6698,7 @@ sub scantron_bubble_selector { my $lspan = $total_lines * 2; # 2 table rows per bubble line. $r->print(''); + $quest.'" value="none" /> '.&mt('No bubble').' '); } @@ -7164,7 +7190,7 @@ sub scantron_upload_scantron_data { my $domsel=&Apache::loncommon::select_dom_form($env{'request.role.domain'}, 'domainid'); my $default_form_data=&defaultFormData(&get_symb($r,1)); - $r->print(<print(' -
    -$default_form_data + +'.$default_form_data.' - - - - - + + + + + + + + +
    $select_link
    Course ID:
    Course Name:
    Domain: $domsel
    File to upload:
    '.$select_link.'
    '.&mt('Course ID:').'
    '.&mt('Course Name:').'
    '.&mt('Domain:').' '.$domsel.'
    '.&mt('File to upload:').'
    - - + +
    -UPLOAD +'); return ''; } @@ -7206,12 +7236,12 @@ sub scantron_upload_scantron_data_save { my $doanotherupload= '
    '."\n". ''."\n". - ''."\n". + ''."\n". '
    '."\n"; if (!&Apache::lonnet::allowed('usc',$env{'form.domainid'}) && !&Apache::lonnet::allowed('usc', $env{'form.domainid'}.'_'.$env{'form.courseid'})) { - $r->print("You are not allowed to upload Scantron data to the requested course.
    "); + $r->print(&mt("You are not allowed to upload Scantron data to the requested course.")."
    "); if ($symb) { $r->print(&show_grading_menu_form($symb)); } else { @@ -7220,7 +7250,7 @@ sub scantron_upload_scantron_data_save { return ''; } my %coursedata=&Apache::lonnet::coursedescription($env{'form.domainid'}.'_'.$env{'form.courseid'}); - $r->print("Doing upload to ".$coursedata{'description'}."
    "); + $r->print(&mt("Doing upload to [_1]",$coursedata{'description'})."
    "); my $fname=$env{'form.upfile.filename'}; #FIXME #copied from lonnet::userfileupload() @@ -7238,13 +7268,18 @@ sub scantron_upload_scantron_data_save { my $uploadedfile=$fname; $fname='scantron_orig_'.$fname; if (length($env{'form.upfile'}) < 2) { - $r->print("Error: The file you attempted to upload, ".&HTML::Entities::encode($env{'form.upfile.filename'},'<>&"').", contained no information. Please check that you entered the correct filename."); + $r->print(&mt("Error: The file you attempted to upload, [_1] contained no information. Please check that you entered the correct filename.",''.&HTML::Entities::encode($env{'form.upfile.filename'},'<>&"')."")); } else { my $result=&Apache::lonnet::finishuserfileupload($env{'form.courseid'},$env{'form.domainid'},'upfile',$fname); if ($result =~ m|^/uploaded/|) { - $r->print("Success: Successfully uploaded ".(length($env{'form.upfile'})-1)." bytes of data into location ".$result.""); + $r->print(&mt("Success: Successfully uploaded [_1] bytes of data into location [_2]", + (length($env{'form.upfile'})-1), + ''.$result."")); } else { - $r->print("Error: An error (".$result.") occurred when attempting to upload the file, ".&HTML::Entities::encode($env{'form.upfile.filename'},'<>&"').""); + $r->print(&mt("Error: An error ([_1]) occurred when attempting to upload the file, [_2]", + $result, + ''.&HTML::Entities::encode($env{'form.upfile.filename'},'<>&"')."")); + } } if ($symb) { @@ -7288,11 +7323,11 @@ sub scantron_download_scantron_data { my $cdom=$env{'course.'.$env{'request.course.id'}.'.domain'}; my $file=$env{'form.scantron_selectfile'}; if (! &valid_file($file)) { - $r->print(<print('

    - The requested file name was invalid. + '.&mt('The requested file name was invalid.').'

    -ERROR +'); $r->print(&show_grading_menu_form(&get_symb($r,1))); return; } @@ -7302,17 +7337,20 @@ ERROR &Apache::lonnet::allowuploaded('/adm/grades',$orig); &Apache::lonnet::allowuploaded('/adm/grades',$corrected); &Apache::lonnet::allowuploaded('/adm/grades',$skipped); - $r->print(<print('

    - Original file as uploaded by the scantron office. + '.&mt('[_1]Original[_2] file as uploaded by the scantron office.', + '','').'

    - Corrections, a file of corrected records that were used in grading. + '.&mt('[_1]Corrections[_2], a file of corrected records that were used in grading.', + '','').'

    - Skipped, a file of records that were skipped. + '.&mt('[_1]Skipped[_2], a file of records that were skipped.', + '','').'

    -DOWNLOAD +'); $r->print(&show_grading_menu_form(&get_symb($r,1))); return ''; }