--- loncom/interface/loncommon.pm 2004/11/02 20:48:02 1.226
+++ loncom/interface/loncommon.pm 2006/05/09 14:38:09 1.365
@@ -1,7 +1,7 @@
# The LearningOnline Network with CAPA
# a pile of common routines
#
-# $Id: loncommon.pm,v 1.226 2004/11/02 20:48:02 albertel Exp $
+# $Id: loncommon.pm,v 1.365 2006/05/09 14:38:09 albertel Exp $
#
# Copyright Michigan State University Board of Trustees
#
@@ -55,13 +55,15 @@ redundancy from other modules and increa
package Apache::loncommon;
use strict;
-use Apache::lonnet();
+use Apache::lonnet;
use GDBM_File;
use POSIX qw(strftime mktime);
-use Apache::Constants qw(:common :http :methods);
use Apache::lonmenu();
use Apache::lonlocal;
use HTML::Entities;
+use Apache::lonhtmlcommon();
+use Apache::loncoursedata();
+use Apache::lontexconvert();
my $readit;
@@ -74,7 +76,7 @@ my %language;
my %supported_language;
my %cprtag;
my %scprtag;
-my %fe; my %fd;
+my %fe; my %fd; my %fm;
my %category_extensions;
# ---------------------------------------------- Designs
@@ -105,10 +107,10 @@ BEGIN {
my $langtabfile = $Apache::lonnet::perlvar{'lonTabDir'}.
'/language.tab';
if ( open(my $fh,"<$langtabfile") ) {
- while (<$fh>) {
- next if /^\#/;
- chomp;
- my ($key,$two,$country,$three,$enc,$val,$sup)=(split(/\t/,$_));
+ while (my $line = <$fh>) {
+ next if ($line=~/^\#/);
+ chomp($line);
+ my ($key,$two,$country,$three,$enc,$val,$sup)=(split(/\t/,$line));
$language{$key}=$val.' - '.$enc;
if ($sup) {
$supported_language{$key}=$sup;
@@ -122,24 +124,24 @@ BEGIN {
my $copyrightfile = $Apache::lonnet::perlvar{'lonIncludes'}.
'/copyright.tab';
if ( open (my $fh,"<$copyrightfile") ) {
- while (<$fh>) {
- next if /^\#/;
- chomp;
- my ($key,$val)=(split(/\s+/,$_,2));
+ while (my $line = <$fh>) {
+ next if ($line=~/^\#/);
+ chomp($line);
+ my ($key,$val)=(split(/\s+/,$line,2));
$cprtag{$key}=$val;
}
close($fh);
}
}
-# ------------------------------------------------------------------ source copyrights
+# ----------------------------------------------------------- source copyrights
{
my $sourcecopyrightfile = $Apache::lonnet::perlvar{'lonIncludes'}.
'/source_copyright.tab';
if ( open (my $fh,"<$sourcecopyrightfile") ) {
- while (<$fh>) {
- next if /^\#/;
- chomp;
- my ($key,$val)=(split(/\s+/,$_,2));
+ while (my $line = <$fh>) {
+ next if ($line =~ /^\#/);
+ chomp($line);
+ my ($key,$val)=(split(/\s+/,$line,2));
$scprtag{$key}=$val;
}
close($fh);
@@ -152,19 +154,20 @@ BEGIN {
my $designdir=$Apache::lonnet::perlvar{'lonTabDir'}.'/lonDomColors';
opendir(DIR,$designdir);
while ($filename=readdir(DIR)) {
+ if ($filename!~/\.tab$/) { next; }
my ($domain)=($filename=~/^(\w+)\./);
- {
- my $designfile = $designdir.'/'.$filename;
- if ( open (my $fh,"<$designfile") ) {
- while (<$fh>) {
- next if /^\#/;
- chomp;
- my ($key,$val)=(split(/\=/,$_));
- if ($val) { $designhash{$domain.'.'.$key}=$val; }
- }
- close($fh);
- }
- }
+ {
+ my $designfile = $designdir.'/'.$filename;
+ if ( open (my $fh,"<$designfile") ) {
+ while (my $line = <$fh>) {
+ next if ($line =~ /^\#/);
+ chomp($line);
+ my ($key,$val)=(split(/\=/,$line));
+ if ($val) { $designhash{$domain.'.'.$key}=$val; }
+ }
+ close($fh);
+ }
+ }
}
closedir(DIR);
@@ -175,10 +178,10 @@ BEGIN {
my $categoryfile = $Apache::lonnet::perlvar{'lonTabDir'}.
'/filecategories.tab';
if ( open (my $fh,"<$categoryfile") ) {
- while (<$fh>) {
- next if /^\#/;
- chomp;
- my ($extension,$category)=(split(/\s+/,$_,2));
+ while (my $line = <$fh>) {
+ next if ($line =~ /^\#/);
+ chomp($line);
+ my ($extension,$category)=(split(/\s+/,$line,2));
push @{$category_extensions{lc($category)}},$extension;
}
close($fh);
@@ -190,13 +193,14 @@ BEGIN {
my $typesfile = $Apache::lonnet::perlvar{'lonTabDir'}.
'/filetypes.tab';
if ( open (my $fh,"<$typesfile") ) {
- while (<$fh>) {
- next if (/^\#/);
- chomp;
- my ($ending,$emb,$descr)=split(/\s+/,$_,3);
+ while (my $line = <$fh>) {
+ next if ($line =~ /^\#/);
+ chomp($line);
+ my ($ending,$emb,$mime,$descr)=split(/\s+/,$line,4);
if ($descr ne '') {
$fe{$ending}=lc($emb);
$fd{$ending}=$descr;
+ if ($mime ne 'unk') { $fm{$ending}=$mime; }
}
}
close($fh);
@@ -311,8 +315,8 @@ END
}
sub lastresurl {
- if ($ENV{'environment.lastresurl'}) {
- return $ENV{'environment.lastresurl'}
+ if ($env{'environment.lastresurl'}) {
+ return $env{'environment.lastresurl'}
} else {
return '/res';
}
@@ -329,9 +333,12 @@ sub storeresurl {
sub studentbrowser_javascript {
unless (
- (($ENV{'request.course.id'}) &&
- (&Apache::lonnet::allowed('srm',$ENV{'request.course.id'})))
- || ($ENV{'request.role'}=~/^(au|dc|su)/)
+ (($env{'request.course.id'}) &&
+ (&Apache::lonnet::allowed('srm',$env{'request.course.id'})
+ || &Apache::lonnet::allowed('srm',$env{'request.course.id'}.
+ '/'.$env{'request.course.sec'})
+ ))
+ || ($env{'request.role'}=~/^(au|dc|su)/)
) { return ''; }
return (<<'ENDSTDBRW');
@@ -722,12 +788,12 @@ ENDTEMPLATE
sub help_open_bug {
my ($topic, $text, $stayOnPage, $width, $height) = @_;
- unless ($ENV{'user.adv'}) { return ''; }
+ unless ($env{'user.adv'}) { return ''; }
unless ($Apache::lonnet::perlvar{'BugzillaHost'}) { return ''; }
$text = "" if (not defined $text);
$stayOnPage = 0 if (not defined $stayOnPage);
- if ($ENV{'browser.interface'} eq 'textual' ||
- $ENV{'environment.remote'} eq 'off' ) {
+ if ($env{'browser.interface'} eq 'textual' ||
+ $env{'environment.remote'} eq 'off' ) {
$stayOnPage=1;
}
$width = 600 if (not defined $width);
@@ -767,12 +833,12 @@ ENDTEMPLATE
sub help_open_faq {
my ($topic, $text, $stayOnPage, $width, $height) = @_;
- unless ($ENV{'user.adv'}) { return ''; }
+ unless ($env{'user.adv'}) { return ''; }
unless ($Apache::lonnet::perlvar{'FAQHost'}) { return ''; }
$text = "" if (not defined $text);
$stayOnPage = 0 if (not defined $stayOnPage);
- if ($ENV{'browser.interface'} eq 'textual' ||
- $ENV{'environment.remote'} eq 'off' ) {
+ if ($env{'browser.interface'} eq 'textual' ||
+ $env{'environment.remote'} eq 'off' ) {
$stayOnPage=1;
}
$width = 350 if (not defined $width);
@@ -815,6 +881,98 @@ ENDTEMPLATE
=pod
+=item * change_content_javascript():
+
+This and the next function allow you to create small sections of an
+otherwise static HTML page that you can update on the fly with
+Javascript, even in Netscape 4.
+
+The Javascript fragment returned by this function (no EscriptE tag)
+must be written to the HTML page once. It will prove the Javascript
+function "change(name, content)". Calling the change function with the
+name of the section
+you want to update, matching the name passed to C, and
+the new content you want to put in there, will put the content into
+that area.
+
+B: Netscape 4 only reserves enough space for the changable area
+to contain room for the original contents. You need to "make space"
+for whatever changes you wish to make, and be B to check your
+code in Netscape 4. This feature in Netscape 4 is B powerful;
+it's adequate for updating a one-line status display, but little more.
+This script will set the space to 100% width, so you only need to
+worry about height in Netscape 4.
+
+Modern browsers are much less limiting, and if you can commit to the
+user not using Netscape 4, this feature may be used freely with
+pretty much any HTML.
+
+=cut
+
+sub change_content_javascript {
+ # If we're on Netscape 4, we need to use Layer-based code
+ if ($env{'browser.type'} eq 'netscape' &&
+ $env{'browser.version'} =~ /^4\./) {
+ return (<. $name is
+the name you will use to reference the area later; do not repeat the
+same name on a given HTML page more then once. $origContent is what
+the area will originally contain, which can be left blank.
+
+=cut
+
+sub changable_area {
+ my ($name, $origContent) = @_;
+
+ if ($env{'browser.type'} eq 'netscape' &&
+ $env{'browser.version'} =~ /^4\./) {
+ # If this is netscape 4, we need to use the Layer tag
+ return "$origContent";
+ } else {
+ return "$origContent";
+ }
+}
+
+=pod
+
+=back
+
+=head1 Excel and CSV file utility routines
+
+=over 4
+
+=cut
+
+###############################################################
+###############################################################
+
+=pod
+
=item * csv_translate($text)
Translate $text to allow it to be output as a 'comma separated values'
@@ -831,7 +989,6 @@ sub csv_translate {
return $text;
}
-
###############################################################
###############################################################
@@ -855,6 +1012,10 @@ Currently supported formats:
=item h3
+=item h4
+
+=item i
+
=item date
=back
@@ -877,6 +1038,8 @@ sub define_excel_formats {
$format->{'h1'} = $workbook->add_format(bold=>1, size=>18);
$format->{'h2'} = $workbook->add_format(bold=>1, size=>16);
$format->{'h3'} = $workbook->add_format(bold=>1, size=>14);
+ $format->{'h4'} = $workbook->add_format(bold=>1, size=>12);
+ $format->{'i'} = $workbook->add_format(italic=>1);
$format->{'date'} = $workbook->add_format(num_format=>
'mm/dd/yyyy hh:mm:ss');
return $format;
@@ -887,84 +1050,83 @@ sub define_excel_formats {
=pod
-=item * change_content_javascript():
+=item * create_workbook
-This and the next function allow you to create small sections of an
-otherwise static HTML page that you can update on the fly with
-Javascript, even in Netscape 4.
+Create an Excel worksheet. If it fails, output message on the
+request object and return undefs.
-The Javascript fragment returned by this function (no EscriptE tag)
-must be written to the HTML page once. It will prove the Javascript
-function "change(name, content)". Calling the change function with the
-name of the section
-you want to update, matching the name passed to C, and
-the new content you want to put in there, will put the content into
-that area.
+Inputs: Apache request object
-B: Netscape 4 only reserves enough space for the changable area
-to contain room for the original contents. You need to "make space"
-for whatever changes you wish to make, and be B to check your
-code in Netscape 4. This feature in Netscape 4 is B powerful;
-it's adequate for updating a one-line status display, but little more.
-This script will set the space to 100% width, so you only need to
-worry about height in Netscape 4.
-
-Modern browsers are much less limiting, and if you can commit to the
-user not using Netscape 4, this feature may be used freely with
-pretty much any HTML.
+Returns (undef) on failure,
+ Excel worksheet object, scalar with filename, and formats
+ from &Apache::loncommon::define_excel_formats on success
=cut
-sub change_content_javascript {
- # If we're on Netscape 4, we need to use Layer-based code
- if ($ENV{'browser.type'} eq 'netscape' &&
- $ENV{'browser.version'} =~ /^4\./) {
- return (<new('/home/httpd'.$filename);
+ if (! defined($workbook)) {
+ $r->log_error("Error creating excel spreadsheet $filename: $!");
+ $r->print('
'.&mt("Unable to create new Excel file. ".
+ "This error has been logged. ".
+ "Please alert your LON-CAPA administrator").
+ '
');
+ return (undef);
}
+ #
+ $workbook->set_tempdir('/home/httpd/perl/tmp');
+ #
+ my $format = &Apache::loncommon::define_excel_formats($workbook);
+ return ($workbook,$filename,$format);
}
+###############################################################
+###############################################################
+
=pod
-=item * changable_area($name, $origContent):
+=item * create_text_file
-This provides a "changable area" that can be modified on the fly via
-the Javascript code provided in C. $name is
-the name you will use to reference the area later; do not repeat the
-same name on a given HTML page more then once. $origContent is what
-the area will originally contain, which can be left blank.
+Create a file to write to and eventually make available to the usre.
+If file creation fails, outputs an error message on the request object and
+return undefs.
-=cut
+Inputs: Apache request object, and file suffix
-sub changable_area {
- my ($name, $origContent) = @_;
+Returns (undef) on failure,
+ Filehandle and filename on success.
- if ($ENV{'browser.type'} eq 'netscape' &&
- $ENV{'browser.version'} =~ /^4\./) {
- # If this is netscape 4, we need to use the Layer tag
- return "$origContent";
- } else {
- return "$origContent";
+=cut
+
+###############################################################
+###############################################################
+sub create_text_file {
+ my ($r,$suffix) = @_;
+ if (! defined($suffix)) { $suffix = 'txt'; };
+ my $fh;
+ my $filename = '/prtspool/'.
+ $env{'user.name'}.'_'.$env{'user.domain'}.'_'.
+ time.'_'.rand(1000000000).'.'.$suffix;
+ $fh = Apache::File->new('>/home/httpd'.$filename);
+ if (! defined($fh)) {
+ $r->log_error("Couldn't open $filename for output $!");
+ $r->print("Problems occured in creating the output file. ".
+ "This error has been logged. ".
+ "Please alert your LON-CAPA administrator.");
}
+ return ($fh,$filename)
}
-=pod
+
+=pod
=back
@@ -992,8 +1154,8 @@ sub get_domains {
# The code below was stolen from "The Perl Cookbook", p 102, 1st ed.
my @domains;
my %seen;
- foreach (sort values(%Apache::lonnet::hostdom)) {
- push (@domains,$_) unless $seen{$_}++;
+ foreach my $dom (sort(values(%Apache::lonnet::hostdom))) {
+ push(@domains,$dom) unless $seen{$dom}++;
}
return @domains;
}
@@ -1007,27 +1169,49 @@ sub domain_select {
} &get_domains;
if ($multiple) {
$domains{''}=&mt('Any domain');
- return &multiple_select_form($name,$value,4,%domains);
+ return &multiple_select_form($name,$value,4,\%domains);
} else {
return &select_form($name,$value,%domains);
}
}
+#-------------------------------------------
+
+=pod
+
+=item * multiple_select_form($name,$value,$size,$hash,$order)
+
+Returns a string containing a