[BACK]Return to lonnavmaps.pm CVS log [TXT] [DIR] Up to [LON-CAPA] / loncom / interface

Diff for /loncom/interface/lonnavmaps.pm between versions 1.132 and 1.141

version 1.132, 2003/01/30 21:36:57 version 1.141, 2003/02/07 22:16:53
Line 49  use POSIX qw (floor strftime); Line 49  use POSIX qw (floor strftime);
 my %navmaphash;  my %navmaphash;
 my %parmhash;  my %parmhash;
   
   # symbolic constants
   sub SYMB { return 1; }
   sub URL { return 2; }
   sub NOTHING { return 3; }
   
   # Some data
   
   my $resObj = "Apache::lonnavmaps::resource";
   
   # Keep these mappings in sync with lonquickgrades, which uses the colors
   # instead of the icons.
   my %statusIconMap = 
       ( $resObj->NETWORK_FAILURE    => '',
         $resObj->NOTHING_SET        => '',
         $resObj->CORRECT            => 'navmap.correct.gif',
         $resObj->EXCUSED            => 'navmap.correct.gif',
         $resObj->PAST_DUE_NO_ANSWER => 'navmap.wrong.gif',
         $resObj->PAST_DUE_ANSWER_LATER => 'navmap.wrong.gif',
         $resObj->ANSWER_OPEN        => 'navmap.wrong.gif',
         $resObj->OPEN_LATER         => '',
         $resObj->TRIES_LEFT         => 'navmap.open.gif',
         $resObj->INCORRECT          => 'navmap.wrong.gif',
         $resObj->OPEN               => 'navmap.open.gif',
         $resObj->ATTEMPTED          => 'navmap.open.gif' );
   
   my %iconAltTags = 
       ( 'navmap.correct.gif' => 'Correct',
         'navmap.wrong.gif'   => 'Incorrect',
         'navmap.open.gif'    => 'Open' );
   
   # Defines a status->color mapping, null string means don't color
   my %colormap = 
       ( $resObj->NETWORK_FAILURE        => '',
         $resObj->CORRECT                => '',
         $resObj->EXCUSED                => '#3333FF',
         $resObj->PAST_DUE_ANSWER_LATER  => '',
         $resObj->PAST_DUE_NO_ANSWER     => '',
         $resObj->ANSWER_OPEN            => '#006600',
         $resObj->OPEN_LATER             => '',
         $resObj->TRIES_LEFT             => '',
         $resObj->INCORRECT              => '',
         $resObj->OPEN                   => '',
         $resObj->NOTHING_SET            => '' );
   # And a special case in the nav map; what to do when the assignment
   # is not yet done and due in less then 24 hours
   my $hurryUpColor = "#FF0000";
   
 sub cleanup {  sub cleanup {
     if (tied(%navmaphash)){      if (tied(%navmaphash)){
  &Apache::lonnet::logthis('Cleanup navmaps: navmaphash');   &Apache::lonnet::logthis('Cleanup navmaps: navmaphash');
Line 72  sub handler { Line 119  sub handler {
 sub real_handler {  sub real_handler {
     my $r = shift;      my $r = shift;
   
     &Apache::loncommon::get_unprocessed_cgi($ENV{QUERY_STRING});  
   
     # Handle header-only request      # Handle header-only request
     if ($r->header_only) {      if ($r->header_only) {
         if ($ENV{'browser.mathml'}) {          if ($ENV{'browser.mathml'}) {
Line 119  sub real_handler { Line 164  sub real_handler {
     # Now that we've displayed some stuff to the user, init the navmap      # Now that we've displayed some stuff to the user, init the navmap
     $navmap->init();      $navmap->init();
   
     $r->print('<table border="0" cellpadding="2" cellspacing="0">');  
     my $date=localtime;  
     $r->print('<tr><td align="right" valign="bottom">Key:&nbsp;&nbsp;</td>');  
   
     # Print discussions and feedback header  
     if ($navmap->{LAST_CHECK}) {  
         $r->print('<td align="center" valign="bottom">&nbsp;&nbsp;'.  
                   '<img src="/adm/lonMisc/chat.gif"> New discussion since '.  
                   strftime("%A, %b %e at %I:%M %P", localtime($navmap->{LAST_CHECK})).  
                   '</td><td align="center" valign="bottom">&nbsp;&nbsp;'.  
                   '<img src="/adm/lonMisc/feedback.gif"> New message (click to open)<p>'.  
                   '</td>');   
     } else {  
         $r->print('<td align="center" valign="bottom">&nbsp;&nbsp;'.  
                   '<img src="/adm/lonMisc/chat.gif"> Discussions</td><td align="center" valign="bottom">'.  
                   '&nbsp;&nbsp;<img src="/adm/lonMisc/feedback.gif"> New message (click to open)'.  
                   '</td>');   
     }  
     $r->print('</tr></table>');  
   
     my $condition = 0;  
     if ($ENV{'form.condition'}) {  
         $condition = 1;  
     }  
   
     # Determine where the "here" marker is and where the screen jumps to.  
     my $SYMB = 1; my $URL = 2; my $NOTHING = 3; # symbolic constants  
     my $hereType; # the type of marker, $SYMB, $URL, or $NOTHING  
     my $here; # the actual URL or SYMB for the here marker  
     my $jumpType; # The type of the thing we have a jump for, $SYMB or $URL  
     my $jump; # the SYMB/URL of the resource we need to jump to  
   
     if ( $ENV{'form.alreadyHere'} ) { # we came from a user's manipulation of the nav page  
         # If this is a click on a folder or something, we want to preserve the "here"  
         # from the querystring, and get the new "jump" marker  
         $hereType = $ENV{'form.hereType'};  
         $here = $ENV{'form.here'};  
         $jumpType = $ENV{'form.jumpType'} || $NOTHING;  
         $jump = $ENV{'form.jump'};  
     } else { # the user is visiting the nav map from the remote  
         # We're coming from the remote. We have either a url, a symb, or nothing,  
         # and we need to figure out what.  
         # Preference: Symb  
           
         if ($ENV{'form.symb'}) {  
             $hereType = $jumpType = $SYMB;  
             $here = $jump = $ENV{'form.symb'};  
         } elsif ($ENV{'form.postdata'}) {  
             # couldn't find a symb, is there a URL?  
             my $currenturl = $ENV{'form.postdata'};  
             $currenturl=~s/^http\:\/\///;  
             $currenturl=~s/^[^\/]+//;  
   
             $hereType = $jumpType = $URL;  
             $here = $jump = $currenturl;  
         } else {  
             # Nothing  
             $hereType = $jumpType = $NOTHING;  
         }  
     }  
   
       
     # alreadyHere allows us to only open the maps necessary to view  
     # the current location once, while at the same time remembering  
     # the current location. Without that check, the user would never  
     # be able to close those maps; the user would close it, and the  
     # currenturl scan would re-open it.  
     my $queryAdd = "&alreadyHere=1";  
   
     if ($condition) {  
         $r->print("<a href=\"navmaps?condition=0&filter=&$queryAdd" .  
                   "&hereType=$hereType&here=" . Apache::lonnet::escape($here) .  
                   "\">Close All Folders</a>");  
     } else {  
         $r->print("<a href=\"navmaps?condition=1&filter=&$queryAdd" .  
                   "&hereType=$hereType&here=" . Apache::lonnet::escape($here) .   
                   "\">Open All Folders</a>");  
     }  
   
     $r->print('<br>&nbsp;');      $r->print('<br>&nbsp;');
     $r->rflush();      $r->rflush();
Line 208  sub real_handler { Line 175  sub real_handler {
         return OK;          return OK;
     }      }
   
     # Grab a resource object so we have access to the constants; this      # renderer call
     # is technically not proper, but should be harmless      my $render = render({ 'cols' => [0,1,2,3],
     my $res = $navmap->firstResource();                            'url' => '/adm/navmaps',
                             'printKey' => 1,
     # These are some data tables, which make it easy to change some of                            'r' => $r});
     # of the specific visualization parameters if desired.  
   
     # Defines a status->color mapping, null string means don't color  
     my %colormap =   
     ( $res->NETWORK_FAILURE        => '',  
       $res->CORRECT                => '',  
       $res->EXCUSED                => '#3333FF',  
       $res->PAST_DUE_ANSWER_LATER  => '',  
       $res->PAST_DUE_NO_ANSWER     => '',  
       $res->ANSWER_OPEN            => '#006600',  
       $res->OPEN_LATER             => '',  
       $res->TRIES_LEFT             => '',  
       $res->INCORRECT              => '',  
       $res->OPEN                   => '',  
       $res->NOTHING_SET            => ''        );  
     # And a special case in the nav map; what to do when the assignment  
     # is not yet done and due in less then 24 hours  
     my $hurryUpColor = "#FF0000";  
   
     # Keep these mappings in sync with lonquickgrades, which uses the colors  
     # instead of the icons.  
     my %statusIconMap =   
         ( $res->NETWORK_FAILURE    => '',  
           $res->NOTHING_SET        => '',  
           $res->CORRECT            => 'navmap.correct.gif',  
           $res->EXCUSED            => 'navmap.correct.gif',  
           $res->PAST_DUE_NO_ANSWER => 'navmap.wrong.gif',  
           $res->PAST_DUE_ANSWER_LATER => 'navmap.wrong.gif',  
           $res->ANSWER_OPEN        => 'navmap.wrong.gif',  
           $res->OPEN_LATER         => '',  
           $res->TRIES_LEFT         => 'navmap.open.gif',  
           $res->INCORRECT          => 'navmap.wrong.gif',  
           $res->OPEN               => 'navmap.open.gif',  
           $res->ATTEMPTED          => 'navmap.open.gif' );  
   
     my %iconAltTags =   
         ( 'navmap.correct.gif' => 'Correct',  
           'navmap.wrong.gif'   => 'Incorrect',  
           'navmap.open.gif'    => 'Open' );  
   
     my %condenseStatuses =  
         ( $res->NETWORK_FAILURE    => 1,  
           $res->NOTHING_SET        => 1,  
           $res->CORRECT            => 1 );  
   
     my %filterHash;  
     # Figure out what we're not displaying  
     foreach (split(/\,/, $ENV{"form.filter"})) {  
         if ($_) {  
             $filterHash{$_} = "1";  
         }  
     }  
   
     # Is this a new-style course? If so, we want to suppress showing the top-level  
     # maps in their own folders, in favor of "inlining" them.  
     my $topResource = $navmap->getById("0.0");  
   
     # Begin the HTML table  
     # four cols: resource + indent, chat+feedback, icon, text string  
     $r->print('<table cellspacing="0" cellpadding="3" border="0" bgcolor="#FFFFFF">' ."\n");  
   
     # This needs to be updated to use symbs from the remote,   
     # instead of uris. The changes to this and the main rendering  
     # loop should be obvious.  
     # Here's a simple example of the iterator.  
     # Preprocess the map: Look for current URL, force inlined maps to display  
   
     my $mapIterator = $navmap->getIterator(undef, undef, undef, 1);  
     my $found = 0;  
     my $depth = 1;  
     my $currentJumpIndex = 0; # keeps track of when the current resource is found,  
                              # so we can back up a few and put the anchor above the  
                              # current resource  
     my $currentJumpDelta = 2; # change this to change how many resources are displayed  
                              # before the current resource when using #current  
     $mapIterator->next(); # discard the first BEGIN_MAP  
     my $curRes = $mapIterator->next();  
     my $counter = 0;  
     my $foundJump = ($jumpType == $NOTHING); # look for jump point if we have one  
     my $looped = 0;   
   
     # We only need to do this if we need to open the maps to show the  
     # current position. This will change the counter so we can't count  
     # for the jump marker with this loop.  
     while ($depth > 0 && !$ENV{'form.alreadyHere'}) {  
         if ($curRes == $mapIterator->BEGIN_MAP()) { $depth++; }  
         if ($curRes == $mapIterator->END_MAP()) { $depth--; }  
   
         if (ref($curRes) && !$ENV{'form.alreadyHere'} &&   
             ($hereType == $SYMB && $curRes->symb() eq $here) ||  
             (ref($curRes) && $hereType == $URL && $curRes->src() eq $here)) {  
             my $mapStack = $mapIterator->getStack();  
               
             # Ensure the parent maps are open  
             for my $map (@{$mapStack}) {  
                 if ($condition) {  
                     undef $filterHash{$map->map_pc()};  
                 } else {  
                     $filterHash{$map->map_pc()} = 1;  
                 }  
             }  
             $ENV{'form.alreadyHere'} = 1;  
         }  
         $looped = 1;  
   
         $curRes = $mapIterator->next();  
     }              
       
     $mapIterator = $navmap->getIterator(undef, undef, \%filterHash, 0);  
     $depth = 1;  
     $mapIterator->next();  
     $curRes = $mapIterator->next();  
   
     while ($depth > 0 && !$foundJump) {  
         if ($curRes == $mapIterator->BEGIN_MAP()) { $depth++; }  
         if ($curRes == $mapIterator->END_MAP()) { $depth--; }  
         if (ref($curRes)) { $counter++; }  
   
         if (ref($curRes) &&   
             (($jumpType == $SYMB && $curRes->symb() eq $jump) ||  
             ($jumpType == $URL && $curRes->src() eq $jump))) {  
             # If this is the correct resource, be sure to   
             # show it by making sure the containing maps  
             # are open.  
   
             # This is why we have to use the main iterator instead of the  
             # potentially faster DFS: The count has to be the same, so  
             # the order has to be the same, which DFS won't give us.  
             $currentJumpIndex = $counter;  
             $foundJump = 1;  
         }  
   
         $curRes = $mapIterator->next();  
     }  
       
     undef $res; # so we don't accidentally use it later  
     my $indentLevel = 0;  
     my $indentString = "<img src='/adm/lonIcons/whitespace1.gif' width='25' height='1' alt='' border='0' />";  
   
     my $isNewBranch = 0;  
     my $now = time();  
     my $in24Hours = $now + 24 * 60 * 60;  
     my $displayedHereMarker = 0;  
     my $displayedJumpMarker = 0;  
       
     # We know the first thing is a BEGIN_MAP (see "$self->{STARTED}"  
     # code in iterator->next), so ignore the first one  
     $mapIterator = $navmap->getIterator(undef, undef, \%filterHash,  
                                            $condition);  
     $mapIterator->next();  
     $curRes = $mapIterator->next();  
     $depth = 1;  
   
     my @backgroundColors = ("#FFFFFF", "#F6F6F6");  
     my $rowNum = 0;  
   
     $counter = 0;  
   
     while ($depth > 0) {  
         if ($curRes == $mapIterator->BEGIN_MAP() ||  
             $curRes == $mapIterator->BEGIN_BRANCH()) {  
             $indentLevel++;  
         }  
         if ($curRes == $mapIterator->END_MAP() ||  
             $curRes == $mapIterator->END_BRANCH()) {  
             $indentLevel--;  
         }  
         if ($curRes == $mapIterator->BEGIN_BRANCH()) {  
             $isNewBranch = 1;  
         }  
         if ($curRes == $mapIterator->BEGIN_MAP()) { $depth++; }  
         if ($curRes == $mapIterator->END_MAP()) { $depth--; }  
   
         if (ref($curRes)) { $counter++; }  
   
         if (ref($curRes)) {  
   
             my $deltalevel = $isNewBranch? 1 : 0; # reserves space for branch icon  
   
             if ($indentLevel - $deltalevel < 0) {  
                 # If this would be at a negative depth (top-level maps in  
                 # new-style courses, we want to suppress their title display)  
                 # then ignore it.  
                 $curRes = $mapIterator->next();  
                 next;  
             }  
   
             # Step one: Decide which parts to show  
             my @parts = @{$curRes->parts()};  
             my $multipart = scalar(@parts) > 1;  
             my $condensed = 0;  
                   
             if ($curRes->is_problem()) {  
   
                 # Is it multipart?  
                 if ($multipart) {  
                     # If it's multipart, see if part 0 is "open"  
                     # if it is, display all parts, if it isn't,  
                     # just display first  
                     if (!$curRes->opendate("0")) {  
                         # no parts are open, display as one part  
                         @parts = ("0");  
                         $condensed = 1;  
                     } else {  
                         # Otherwise, only display part 0 if we want to   
                         # attach feedback or email information to it  
                         if ($curRes->hasDiscussion() || $curRes->getFeedback()) {  
                             # Is this right? I think this will toss it  
                             # if it DOES have discussion, not if it doesn't?  
                             # - Jeremy (yes, commenting on his own code)  
                             shift @parts;  
                         } else {  
                             # Now, we decide whether to condense the  
                             # parts due to similarity  
                             my $status = $curRes->status($parts[1]);  
                             my $due = $curRes->duedate($parts[1]);  
                             my $open = $curRes->opendate($parts[1]);  
                             my $statusAllSame = 1;  
                             my $dueAllSame = 1;  
                             my $openAllSame = 1;  
                             for (my $i = 2; $i < scalar(@parts); $i++) {  
                                 if ($curRes->status($parts[$i]) != $status){  
                                     $statusAllSame = 0;  
                                 }  
                                 if ($curRes->duedate($parts[$i]) != $due ) {  
                                     $dueAllSame = 0;  
                                 }  
                                 if ($curRes->opendate($parts[$i]) != $open) {  
                                     $openAllSame = 0;  
                                 }  
                             }  
                               
                             # $*allSame is true if all the statuses were  
                             # the same. Now, if they are all the same and  
                             # match one of the statuses to condense, or they  
                             # are all open with the same due date, or they are  
                             # all OPEN_LATER with the same open date, display the  
                             # status of the first non-zero part (to get the 'correct'  
                             # status right, since 0 is never 'correct' or 'open').  
                             if (($statusAllSame && defined($condenseStatuses{$status})) ||  
                                 ($dueAllSame && $status == $curRes->OPEN && $statusAllSame)||  
                                 ($openAllSame && $status == $curRes->OPEN_LATER && $statusAllSame) ){  
                                 @parts = ($parts[1]);  
                                 $condensed = 1;  
                             }  
                         }  
                     }  
                 }  
   
             } else {  
                 $parts[0] = "0"; # this is to get past foreach loop below  
                  # you can consider a non-problem resource as a resource  
                   # with only one part without loss, and it simplifies the looping  
             }  
   
             # Is it a multipart problem with a single part, now in   
             # @parts with "0" filtered out? If so, 'forget' it's a multi-part  
             # problem and treat it like a single-part problem.  
             if ( scalar(@parts) == 1 ) {  
                 $multipart = 0;  
             }  
   
             # Display one part, in event of network error.  
             # If this is a single part, we can at least show the correct  
             # status, but if it's multipart, we're lost, since we can't  
             # retreive the metadata to count the parts  
             if ($curRes->{RESOURCE_ERROR}) {  
                 @parts = ("0");  
             }  
   
             # Step Two: Print the actual data.  
   
             # For each part we intend to display...  
             foreach my $part (@parts) {  
   
                 my $nonLinkedText = ""; # unlinked stuff after title  
                   
                 my $stack = $mapIterator->getStack();  
                 my $src = getLinkForResource($stack);  
   
                 # Pass the correct symb on the querystring, so the  
                 # remote will figure out where we are if we click a link  
                 my $srcHasQuestion = $src =~ /\?/;  
                 my $link = $src.  
                     ($srcHasQuestion?'&':'?') .  
                     'symb='.&Apache::lonnet::escape($curRes->symb()).  
                     '"';  
   
                 my $title = $curRes->compTitle();  
                 if ($src=~/^\/uploaded\//) {  
     $nonLinkedText=$title;  
                     $title='';  
                 }  
                 my $partLabel = "";  
                 my $newBranchText = "";  
   
                 # If this is a new branch, label it so  
                 if ($isNewBranch) {  
                     $newBranchText = "<img src=\"/adm/lonIcons/branch.gif\" border=\"0\">";  
                     $isNewBranch = 0;  
                 }  
   
                 # links to open and close the folders  
                 my $linkopen = "<a href=\"$link\">";  
                 my $linkclose = "</a>";  
   
                 my $icon = "<img src=\"/adm/lonIcons/html.gif\" alt=\"\" border=\"0\" />";  
                 if ($curRes->is_problem()) {   
                     if ($part eq "0" || $condensed) {  
                         $icon = '<img src="/adm/lonIcons/problem.gif" alt="" border=\"0\" />';   
                     } else {  
                         $icon = $indentString;  
                     }  
                 }  
   
                 # Display the correct icon, link to open or shut map  
                 if ($curRes->is_map()) {   
                     my $mapId = $curRes->map_pc();  
                     my $nowOpen = (!defined($filterHash{$mapId}));  
                     if ($condition) {$nowOpen = !$nowOpen;}  
                     $icon = $nowOpen ?  
                         "navmap.folder.closed.gif" : "navmap.folder.open.gif";  
                     $icon = "<img src=\"/adm/lonIcons/$icon\" alt=\"\" border=\"0\" />";  
                     $linkopen = "<a href=\"/adm/navmaps?filter=";  
                     $linkopen .= ($nowOpen xor $condition) ?   
                         addToFilter(\%filterHash, $mapId) :  
                         removeFromFilter(\%filterHash, $mapId);  
                     $linkopen .= "&condition=$condition&$queryAdd" .   
                         "&hereType=$hereType&here=" .   
                         Apache::lonnet::escape($here) . "&jumpType=$SYMB&" .  
                         "jump=" . Apache::lonnet::escape($curRes->symb()) ."\">";  
                     $linkclose = "</a>";  
   
                 }  
                   
                 my $colorizer = "";  
                 my $color;  
                 if ($curRes->is_problem()) {  
                     $color = $colormap{$curRes->status};  
   
                     if (dueInLessThen24Hours($curRes, $part) ||  
                         lastTry($curRes, $part)) {  
                         $color = $hurryUpColor;  
                     }  
   
                     if ($color ne "") {  
                         $colorizer = "bgcolor=\"$color\"";  
                     }  
                 }  
   
                 if ($curRes->randomout()) {  
                     $nonLinkedText .= ' <i>(hidden)</i> ';  
                 }  
   
                 $rowNum++;  
                 my $backgroundColor = $backgroundColors[$rowNum % scalar(@backgroundColors)];  
   
                 # FIRST COL: The resource indentation, branch icon, name, and anchor  
                 $r->print("  <tr bgcolor=\"$backgroundColor\"><td align=\"left\" valign=\"center\">\n");  
   
                 # Print the anchor if necessary  
                 if ($counter == $currentJumpIndex - $currentJumpDelta ) {  
                     $r->print('<a name="curloc" />');  
                     $displayedJumpMarker = 1;  
                 }  
   
                 # print indentation  
                 for (my $i = 0; $i < $indentLevel - $deltalevel; $i++) {  
                     $r->print($indentString);  
                 }  
   
                 $r->print("  ${newBranchText}${linkopen}$icon${linkclose}\n");  
   
                 my $curMarkerBegin = "";  
                 my $curMarkerEnd = "";  
   
                 # Is this the current resource?  
                 if (!$displayedHereMarker &&   
                     (($hereType == $SYMB && $curRes->symb eq $here) ||  
                     ($hereType == $URL && $curRes->src eq $here))) {  
                     $curMarkerBegin = '<font color="red" size="+2">&gt; </font>';  
                     $curMarkerEnd = '<font color="red" size="+2"> &lt;</font>';  
                     $displayedHereMarker = 1;  
                 }  
   
                 if ($curRes->is_problem() && $part ne "0" && !$condensed) {   
                     $partLabel = " (Part $part)";   
                     $title = "";  
                 }  
                 if ($multipart && $condensed) {  
                     $nonLinkedText .= ' (' . $curRes->countParts() . ' parts)';  
                 }  
   
                 $r->print("  $curMarkerBegin<a href=\"$link\">$title$partLabel</a> $curMarkerEnd $nonLinkedText");  
   
                 #if ($curRes->{RESOURCE_ERROR}) {  
                 #    $r->print(&Apache::loncommon::help_open_topic ("Navmap_Host_Down",  
                 #                              '<font size="-1">Host down</font>'));  
                 #    }  
   
                 $r->print("</td>\n");  
   
                 # SECOND COL: Is there text, feedback, errors??  
                 my $discussionHTML = ""; my $feedbackHTML = ""; my $errorHTML = "";  
   
                 if ($curRes->hasDiscussion()) {  
                     $discussionHTML = $linkopen .  
                         '<img border="0" src="/adm/lonMisc/chat.gif" />' .  
                         $linkclose;  
                 }  
   
                 if ($curRes->getFeedback()) {  
                     my $feedback = $curRes->getFeedback();  
                     foreach (split(/\,/, $feedback)) {  
                         if ($_) {  
                             $feedbackHTML .= '&nbsp;<a href="/adm/email?display='  
                                 . &Apache::lonnet::escape($_) . '">'  
                                 . '<img src="/adm/lonMisc/feedback.gif" '  
                                 . 'border="0" /></a>';  
                         }  
                     }  
                 }  
   
                 if ($curRes->getErrors()) {  
                     my $errors = $curRes->getErrors();  
                     foreach (split(/,/, $errors)) {  
                         if ($_) {  
                             $errorHTML .= '&nbsp;<a href="/adm/email?display='  
                                 . &Apache::lonnet::escape($_) . '">'  
                                 . '<img src="/adm/lonMisc/bomb.gif" '  
                                 . 'border="0" /></a>';  
                         }  
                     }  
                 }  
   
                 $r->print("<td width=\"75\" align=\"left\" valign=\"center\">$discussionHTML$feedbackHTML$errorHTML&nbsp;</td>");  
   
                 # Is this the first displayed part of a multi-part problem  
                 # that has not been condensed, so we should suppress these two  
                 # columns so we don't display useless status info about part  
                 # "0"?  
                 my $firstDisplayed = !$condensed && $multipart && $part eq "0";  
   
                 # THIRD COL: Problem status icon  
                 if ($curRes->is_problem() &&  
                     !$firstDisplayed) {  
                     my $icon = $statusIconMap{$curRes->status($part)};  
                     my $alt = $iconAltTags{$icon};  
                     if ($icon) {  
                         $r->print("<td width=\"30\" valign=\"center\" width=\"50\" align=\"right\">$linkopen<img width=\"25\" height=\"25\" src=\"/adm/lonIcons/$icon\" border=\"0\" alt=\"$alt\" />$linkclose</td>\n");  
                     } else {  
                         $r->print("<td width=\"30\">&nbsp;</td>\n");  
                     }  
                 } else { # not problem, no icon  
                     $r->print("<td width=\"30\">&nbsp;</td>\n");  
                 }  
   
                 # FOURTH COL: Text description  
                 $r->print("<td align=\"right\" valign=\"center\">\n");  
                   
                 if ($curRes->kind() eq "res" &&  
                     $curRes->is_problem() &&  
                     !$firstDisplayed) {  
                     $r->print ("<font color=\"$color\"><b>") if ($color);  
                     $r->print (getDescription($curRes, $part));  
                     $r->print ("</b></font>") if ($color);  
                 }  
                 if ($curRes->is_map() && advancedUser() && $curRes->randompick()) {  
                     $r->print('(randomly select ' . $curRes->randompick() .')');  
                 }  
   
                 $r->print("&nbsp;</td></tr>\n");  
   
                 if (!($counter % 20)) { $r->rflush(); }  
                 if ($counter == 2) { $r->rflush(); }  
             }  
         }  
         $curRes = $mapIterator->next();  
     }  
   
     $r->print("</table>");  
   
     # Print out the part that jumps to #curloc if it exists  
     if ($displayedJumpMarker) {  
         $r->print('<script>location += "#curloc";</script>');  
     }  
   
     $navmap->untieHashes();      $navmap->untieHashes();
   
     $r->print("</body></html>");      $r->print("</body></html>");
       $r->rflush();
   
     return OK;      return OK;
 }  }
Line 950  sub timeToHumanString { Line 432  sub timeToHumanString {
     }      }
 }  }
   
   
   =pod
   
   =head1 navmap renderer
   
   The navmaprenderer package provides a sophisticated rendering of the standard navigation maps interface into HTML. The provided nav map handler is actually just a glorified call to this. 
   
   Because of the large number of parameters this function presents, instead of passing it arguments as is normal, pass it in an anonymous hash with the given options. This is because there is no obvious order you may wish to override these in and a hash is easier to read and understand then "undef, undef, undef, 1, undef, undef, renderButton, undef, 0" when you mostly want default behaviors.
   
   The package provides a function called 'render', called as Apache::lonnavmaps::renderer->render({}).
   
   =head2 Overview of Columns
   
   The renderer will build an HTML table for the navmap and return it. The table is consists of several columns, and a row for each resource (or possibly each part). You tell the renderer how many columns to create and what to place in each column, optionally using one or more of the preparent columns, and the renderer will assemble the table.
   
   Any additional generally useful column types should be placed in the renderer code here, so anybody can use it anywhere else. Any code specific to the current application (such as the addition of <input> elements in a column) should be placed in the code of the thing using the renderer.
   
   At the core of the renderer is the array reference COLS (see Example section below for how to pass this correctly). The COLS array will consist of entries of one of two types of things: Either an integer representing one of the pre-packaged column types, or a sub reference that takes a resource reference, a part number, and a reference to the argument hash passed to the renderer, and returns a string that will be inserted into the HTML representation as it.
   
   The pre-packaged column names are refered to by constants in the Apache::lonnavmaps::renderer namespace. The following currently exist:
   
   =over 4
   
   =item * B<resource>: The general info about the resource: Link, icon for the type, etc. The first column in the standard nav map display. This column also accepts the following parameter in the renderer hash:
   
   =over 4
   
   =item * B<resource_nolink>: If true, the resource will not be linked. Default: false, resource will have links.
   
   =item * B<resource_part_count>: If true (default), the resource will show a part count if the full part list is not displayed. If false, the resource will never show a part count.
   
   =back
   
   =item B<communication_status>: Whether there is discussion on the resource, email for the user, or (lumped in here) perl errors in the execution of the problem. This is the second column in the main nav map.
   
   =item B<quick_status>: An icon for the status of a problem, with four possible states: Correct, incorrect, open, or none (not open yet, not a problem). The third column of the standard navmap.
   
   =item B<long_status>: A text readout of the details of the current status of the problem, such as "Due in 22 hours". The fourth column of the standard navmap.
   
   =back
   
   If you add any others please be sure to document them here.
   
   An example of a column renderer that will show the ID number of a resource, along with the part name if any:
   
    sub { 
     my ($resource, $part, $params) = @_;   
     if ($part) { return '<td>' . $resource->{ID} . ' ' . $part . '</td>'; }
     return '<td>' . $resource->{ID} . '</td>';
    }
   
   Note these functions are responsible for the TD tags, which allow them to override vertical and horizontal alignment, etc.
   
   =head2 Parameters
   
   Most of these parameters are only useful if you are *not* using the folder interface (i.e., the default first column), which is probably the common case. If you are using this interface, then you should be able to get away with just using 'cols' (to specify the columns shown), 'url' (necessary for the folders to link to the current screen correctly), and possibly 'queryString' if your app calls for it. In that case, maintaining the state of the folders will be done automatically.
   
   =over 4
   
   =item * B<iterator>: A reference to a fresh ::iterator to use from the navmaps. The rendering will reflect the options passed to the iterator, so you can use that to just render a certain part of the course, if you like. If one is not passed, the renderer will attempt to construct one from ENV{'form.filter'} and ENV{'form.condition'} information.
   
   =item * B<navmap>: A reference to a navmap, used only if an iterator is not passed in. If this is necessary to make an iterator but it is not passed in, a new one will be constructed based on ENV info. This is useful to do basic error checking before passing it off to render.
   
   =item * B<cols>: An array reference
   
   =item * B<showParts>: A flag. If yes (default), a line for the resource itself, and a line for each part will be displayed. If not, only one line for each resource will be displayed.
   
   =item * B<condenseParts>: A flag. If yes (default), if all parts of the problem have the same status and that status is Nothing Set, Correct, or Network Failure, then only one line will be displayed for that resource anyhow. If no, all parts will always be displayed. If showParts is 0, this is ignored.
   
   =item * B<jumpCount>: A string identifying the URL to place the anchor 'curloc' at. Default to no anchor at all. It is the responsibility of the renderer user to ensure that the #curloc is in the URL. By default, determined through the use of the ENV{} 'jump' and 'jumpType' information.
   
   =item * B<hereURL>: A URL identifying where to place the 'here' marker. By default, will pull this from the ENV{'form.here*'} info.
   
   =item * B<hereSymb>: A Symb identifying where to place the 'here' marker. Default same as hereURL.
   
   =item * B<indentString>: A string identifying the indentation string to use. By default, this is a 25 pixel whitespace image with no alt text.
   
   =item * B<queryString>: A string which will be prepended to the query string used when the folders are opened or closed.
   
   =item * B<url>: The url the folders will link to, which should be the current page. Required if the resource info column is shown.
   
   =item * B<currentJumpIndex>: Describes the currently-open row number to cause the browser to jump to, because the user just opened that folder. By default, pulled from the Jump information in the ENV{'form.*'}.
   
   =item * B<r>: The standard Apache response object. If you pass this to the render, it will use it to flush the table every 20 rows and handle the rendering itself.
   
   =item * B<printKey>: If true, print the key that appears on the top of the standard navmaps. Default is false.
   
   =item * B<printCloseAll>: If true, print the "Close all folders" or "open all folders" links. Default is true.
   
   =back
   
   =head2 Additional Info
   
   In addition to the parameters you can pass to the renderer, which will be passed through unchange to the column renderers, the renderer will generate the following information which your renderer may find useful:
   
   =over 4
   
   =back
   
   =cut
   
   sub resource { return 0; }
   sub communication_status { return 1; }
   sub quick_status { return 2; }
   sub long_status { return 3; }
   
   # Data for render_resource
   
   sub render_resource {
       my ($resource, $part, $params) = @_;
   
       my $nonLinkedText = ''; # stuff after resource title not in link
   
       my $link = $params->{"resourceLink"};
       my $src = $resource->src();
       my $it = $params->{"iterator"};
       my $filter = $it->{FILTER};
   
       my $title = $resource->compTitle();
       if ($src =~ /^\/uploaded\//) {
           $nonLinkedText=$title;
           $title = '';
       }
       my $partLabel = "";
       my $newBranchText = "";
       
       # If this is a new branch, label it so
       if ($params->{'isNewBranch'}) {
           $newBranchText = "<img src='/adm/lonIcons/branch.gif' border='0' />";
       }
   
       # links to open and close the folder
       my $linkopen = "<a href='$link'>";
       my $linkclose = "</a>";
   
       # Default icon: HTML page
       my $icon = "<img src='/adm/lonIcons/html.gif' alt='' border='0' />";
       
       if ($resource->is_problem()) {
           if ($part eq "0" || $params->{'condensed'}) {
               $icon = '<img src="/adm/lonIcons/problem.gif" alt="" border="0" />';
           } else {
               $icon = $params->{'indentString'};
           }
       }
   
       # Display the correct map icon to open or shut map
       if ($resource->is_map()) {
           my $mapId = $resource->map_pc();
           my $nowOpen = !defined($filter->{$mapId});
           if ($it->{CONDITION}) {
               $nowOpen = !$nowOpen;
           }
           $icon = 'navmap.folder.' . ($nowOpen ? 'closed' : 'open') . '.gif';
           $icon = "<img src='/adm/lonIcons/$icon' alt='' border='0' />";
           
           $linkopen = "<a href='" . $params->{'url'} . '?' . 
               $params->{'queryString'} . '&filter=';
           $linkopen .= ($nowOpen xor $it->{CONDITION}) ?
               addToFilter($filter, $mapId) :
               removeFromFilter($filter, $mapId);
           $linkopen .= "&condition=" . $it->{CONDITION} . '&hereType='
               . $params->{'hereType'} . '&here=' .
               &Apache::lonnet::escape($params->{'here'}) . 
               '&jumpType=' . SYMB() . '&jump=' .
               &Apache::lonnet::escape($resource->symb()) . 
               "&folderManip=1'>";
       }
   
       if ($resource->randomout()) {
           $nonLinkedText .= ' <i>(hidden)</i> ';
       }
       
       # We're done preparing and finally ready to start the rendering
       my $result = "<td align='left' valign='center'>";
   
       my $indentLevel = $params->{'indentLevel'};
       if ($newBranchText) { $indentLevel--; }
   
       # print indentation
       for (my $i = 0; $i < $indentLevel; $i++) {
           $result .= $params->{'indentString'};
       }
   
       # Decide what to display
       $result .= "$newBranchText$linkopen$icon$linkclose";
       
       my $curMarkerBegin = '';
       my $curMarkerEnd = '';
   
       # Is this the current resource?
       if (!$params->{'displayedHereMarker'} &&
           (($params->{'hereType'} == SYMB() && 
             $resource->symb() eq $params->{'here'}) ||
            ($params->{'hereType'} == URL() &&
             $resource->src() eq $params->{'here'}))) {
           $curMarkerBegin = '<font color="red" size="+2">&gt; </font>';
           $curMarkerEnd = '<font color="red" size="+2">&lt;</font>';
       }
   
       if ($resource->is_problem() && $part ne "0" && 
           !$params->{'condensed'}) {
           $partLabel = " (Part $part)";
           $title = "";
       }
   
       if ($params->{'multipart'} && $params->{'condensed'}) {
           $nonLinkedText .= ' (' . $resource->countParts() . ' parts)';
       }
   
       $result .= "  $curMarkerBegin<a href='$link'>$title$partLabel</a>$curMarkerEnd $nonLinkedText</td>";
   
       return $result;
   }
   
   sub render_communication_status {
       my ($resource, $part, $params) = @_;
       my $discussionHTML = ""; my $feedbackHTML = ""; my $errorHTML = "";
   
       my $link = $params->{"resourceLink"};
       my $linkopen = "<a href='$link'>";
       my $linkclose = "</a>";
   
       if ($resource->hasDiscussion()) {
           $discussionHTML = $linkopen .
               '<img border="0" src="/adm/lonMisc/chat.gif" />' .
               $linkclose;
       }
       
       if ($resource->getFeedback()) {
           my $feedback = $resource->getFeedback();
           foreach (split(/\,/, $feedback)) {
               if ($_) {
                   $feedbackHTML .= '&nbsp;<a href="/adm/email?display='
                       . &Apache::lonnet::escape($_) . '">'
                       . '<img src="/adm/lonMisc/feedback.gif" '
                       . 'border="0" /></a>';
               }
           }
       }
       
       if ($resource->getErrors()) {
           my $errors = $resource->getErrors();
           foreach (split(/,/, $errors)) {
               if ($_) {
                   $errorHTML .= '&nbsp;<a href="/adm/email?display='
                       . &Apache::lonnet::escape($_) . '">'
                       . '<img src="/adm/lonMisc/bomb.gif" '
                       . 'border="0" /></a>';
               }
           }
       }
   
       return "<td width=\"75\" align=\"left\" valign=\"center\">$discussionHTML$feedbackHTML$errorHTML&nbsp;</td>";
   
   }
   sub render_quick_status {
       my ($resource, $part, $params) = @_;
       my $result = "";
       my $firstDisplayed = !$params->{'condensed'} && 
           $params->{'multipart'} && $part eq "0";
   
       my $link = $params->{"resourceLink"};
       my $linkopen = "<a href='$link'>";
       my $linkclose = "</a>";
   
       if ($resource->is_problem() &&
           !$firstDisplayed) {
           my $icon = $statusIconMap{$resource->status($part)};
           my $alt = $iconAltTags{$icon};
           if ($icon) {
               $result .= "<td width='30' valign='center' width='50' align='right'>$linkopen<img width='25' height='25' src='/adm/lonIcons/$icon' border='0' alt='$alt' />$linkclose</td>\n";
           } else {
               $result .= "<td width='30'>&nbsp;</td>\n";
           }
       } else { # not problem, no icon
           $result .= "<td width='30'>&nbsp;</td>\n";
       }
   
       return $result;
   }
   sub render_long_status {
       my ($resource, $part, $params) = @_;
       my $result = "<td align='right' valign='center'>\n";
       my $firstDisplayed = !$params->{'condensed'} && 
           $params->{'multipart'} && $part eq "0";
                   
       my $color;
       if ($resource->is_problem()) {
           $color = $colormap{$resource->status};
           
           if (dueInLessThen24Hours($resource, $part) ||
               lastTry($resource, $part)) {
               $color = $hurryUpColor;
           }
       }
       
       if ($resource->kind() eq "res" &&
           $resource->is_problem() &&
           !$firstDisplayed) {
           if ($color) {$result .= "<font color=\"$color\"><b>"; }
           $result .= getDescription($resource, $part);
           if ($color) {$result .= "</b></font>"; }
       }
       if ($resource->is_map() && advancedUser() && $resource->randompick()) {
           $result .= '(randomly select ' . $resource->randompick() .')';
       }
       
       $result .= "&nbsp;</td>\n";
       
       return $result;
   }
   
   my @preparedColumns = (\&render_resource, \&render_communication_status,
                          \&render_quick_status, \&render_long_status);
   
   sub setDefault {
       my ($val, $default) = @_;
       if (!defined($val)) { return $default; }
       return $val;
   }
   
   sub render {
       my $args = shift;
       &Apache::loncommon::get_unprocessed_cgi($ENV{QUERY_STRING});
       my $result = '';
   
       # Configure the renderer.
       my $cols = $args->{'cols'};
       if (!defined($cols)) {
           # no columns, no nav maps.
           return '';
       }
       my $mustCloseNavMap = 0;
       my $navmap;
       if (defined($args->{'navmap'})) {
           $navmap = $args->{'navmap'};
       }
   
       my $queryString = $args->{'queryString'};
       my $jumpToURL = $args->{'jumpToURL'};
       my $jumpToSymb = $args->{'jumpToSymb'};
       my $jumpType;
       my $hereURL = $args->{'hereURL'};
       my $hereSymb = $args->{'hereSymb'};
       my $hereType;
       my $here;
       my $jump;
       my $currentJumpIndex = setDefault($args->{'currentJumpIndex'}, 0);    
       my $currentJumpDelta = 2; # change this to change how many resources are displayed
                                # before the current resource when using #current
   
       # If we were passed 'here' information, we are not rendering
       # after a folder manipulation, and we were not passed an
       # iterator, make sure we open the folders to show the "here"
       # marker
       my $filterHash = {};
       # Figure out what we're not displaying
       foreach (split(/\,/, $ENV{"form.filter"})) {
           if ($_) {
               $filterHash->{$_} = "1";
           }
       }
   
       my $condition = 0;
       if ($ENV{'form.condition'}) {
           $condition = 1;
       }
   
       if (!$ENV{'form.folderManip'} && !defined($args->{'iterator'})) {
           # Step 1: Check to see if we have a navmap
           if (!defined($navmap)) {
               $navmap = Apache::lonnavmaps::navmap->new(
                           $ENV{"request.course.fn"}.".db",
                           $ENV{"request.course.fn"}."_parms.db", 1, 1);
               $mustCloseNavMap = 1;
           }
           $navmap->init();
   
           # Step two: Locate what kind of here marker is necessary
           # Determine where the "here" marker is and where the screen jumps to.
   
           # We're coming from the remote. We have either a url, a symb, or nothing,
           # and we need to figure out what.
           # Preference: Symb
           
           if ($ENV{'form.symb'}) {
               $hereType = $jumpType = SYMB();
               $here = $jump = $ENV{'form.symb'};
           } elsif ($ENV{'form.postdata'}) {
               # couldn't find a symb, is there a URL?
               my $currenturl = $ENV{'form.postdata'};
               $currenturl=~s/^http\:\/\///;
               $currenturl=~s/^[^\/]+//;
               
               $hereType = $jumpType = URL;
               $here = $jump = $currenturl;
           } else {
               # Nothing
               $hereType = $jumpType = NOTHING();
           }
           # Step three: Ensure the folders are open
           my $mapIterator = $navmap->getIterator(undef, undef, undef, 1);
           my $depth = 1;
           $mapIterator->next(); # discard the first BEGIN_MAP
           my $curRes = $mapIterator->next();
           my $counter = 0;
           my $found = 0;
           
           # We only need to do this if we need to open the maps to show the
           # current position. This will change the counter so we can't count
           # for the jump marker with this loop.
           while ($depth > 0 && !$found) {
               if ($curRes == $mapIterator->BEGIN_MAP()) { $depth++; }
               if ($curRes == $mapIterator->END_MAP()) { $depth--; }
               
               if (ref($curRes) && 
                   ($hereType == SYMB() && $curRes->symb() eq $here) ||
                   (ref($curRes) && $hereType == URL() && $curRes->src() eq $here)) {
                   my $mapStack = $mapIterator->getStack();
                   
                   # Ensure the parent maps are open
                   for my $map (@{$mapStack}) {
                       if ($condition) {
                           undef $filterHash->{$map->map_pc()};
                       } else {
                           $filterHash->{$map->map_pc()} = 1;
                       }
                   }
                   $found = 1;
               }
               
               $curRes = $mapIterator->next();
           }            
   
           # Since we changed the folders, (re-)locate the jump point, if any
           $mapIterator = $navmap->getIterator(undef, undef, $filterHash, 0);
           $depth = 1;
           $mapIterator->next();
           $curRes = $mapIterator->next();
           my $foundJump = 0;
           
           while ($depth > 0 && !$foundJump) {
               if ($curRes == $mapIterator->BEGIN_MAP()) { $depth++; }
               if ($curRes == $mapIterator->END_MAP()) { $depth--; }
               if (ref($curRes)) { $counter++; }
               
               if (ref($curRes) && 
                   (($jumpType == SYMB() && $curRes->symb() eq $jump) ||
                    ($jumpType == URL() && $curRes->src() eq $jump))) {
                   
                   # This is why we have to use the main iterator instead of the
                   # potentially faster DFS: The count has to be the same, so
                   # the order has to be the same, which DFS won't give us.
                   $currentJumpIndex = $counter;
                   $foundJump = 1;
               }
               
               $curRes = $mapIterator->next();
           }
       
       }        
       if ( !defined($args->{'iterator'}) && $ENV{'form.folderManip'} ) { # we came from a user's manipulation of the nav page
           # If this is a click on a folder or something, we want to preserve the "here"
           # from the querystring, and get the new "jump" marker
           $hereType = $ENV{'form.hereType'};
           $here = $ENV{'form.here'};
           $jumpType = $ENV{'form.jumpType'} || NOTHING();
           $jump = $ENV{'form.jump'};
       } 
       
       my $it = $args->{'iterator'};
       if (!defined($it)) {
           # Construct a default iterator based on $ENV{'form.'} information
           
           # Step 1: Check to see if we have a navmap
           if (!defined($navmap)) {
               $navmap = Apache::lonnavmaps::navmap->new(
                           $ENV{"request.course.fn"}.".db",
                           $ENV{"request.course.fn"}."_parms.db", 1, 1);
               $mustCloseNavMap = 1;
           }
           # Paranoia: Make sure it's ready
           $navmap->init();
   
           $args->{'iterator'} = $it = $navmap->getIterator(undef, undef, $filterHash, $condition);
       }
       
       my $showParts = setDefault($args->{'showParts'}, 1);
       my $condenseParts = setDefault($args->{'condenseParts'}, 1);
       # keeps track of when the current resource is found,
       # so we can back up a few and put the anchor above the
       # current resource
       my $r = $args->{'r'};
       my $printKey = $args->{'printKey'};
       my $printCloseAll = $args->{'printCloseAll'};
       if (!defined($printCloseAll)) { $printCloseAll = 1; }
   
       # Print key?
       if ($printKey) {
           $result .= '<table border="0" cellpadding="2" cellspacing="0">';
           my $date=localtime;
           $result.='<tr><td align="right" valign="bottom">Key:&nbsp;&nbsp;</td>';
           if ($navmap->{LAST_CHECK}) {
               $result .= 
                   '<img src="/adm/lonMisc/chat.gif"> New discussion since '.
                   strftime("%A, %b %e at %I:%M %P", localtime($navmap->{LAST_CHECK})).
                   '</td><td align="center" valign="bottom">&nbsp;&nbsp;'.
                   '<img src="/adm/lonMisc/feedback.gif"> New message (click to open)<p>'.
                   '</td>'; 
           } else {
               $result .= '<td align="center" valign="bottom">&nbsp;&nbsp;'.
                   '<img src="/adm/lonMisc/chat.gif"> Discussions</td><td align="center" valign="bottom">'.
                   '&nbsp;&nbsp;<img src="/adm/lonMisc/feedback.gif"> New message (click to open)'.
                   '</td>'; 
           }
   
           $result .= '</tr></table>';
       }
   
       if ($printCloseAll) {
           if ($condition) {
               $result.="<a href=\"navmaps?condition=0&filter=&$queryString" .
                   "&hereType=$hereType&here=" . Apache::lonnet::escape($here) .
                   "\">Close All Folders</a>";
           } else {
               $result.="<a href=\"navmaps?condition=1&filter=&$queryString" .
                   "&hereType=$hereType&here=" . Apache::lonnet::escape($here) . 
                   "\">Open All Folders</a>";
           }
       }    
   
       if ($r) {
           $r->print($result);
           $r->rflush();
           $result = "";
       }
       # End parameter setting
               
       # Data
       $result .= '<table cellspacing="0" cellpadding="3" border="0" bgcolor="#FFFFFF">' ."\n";
       my $res = "Apache::lonnavmaps::resource";
       my %condenseStatuses =
           ( $res->NETWORK_FAILURE    => 1,
             $res->NOTHING_SET        => 1,
             $res->CORRECT            => 1 );
       my @backgroundColors = ("#FFFFFF", "#F6F6F6");
   
       # Shared variables
       $args->{'counter'} = 0; # counts the rows
       $args->{'indentLevel'} = 0;
       $args->{'isNewBranch'} = 0;
       $args->{'condensed'} = 0;    
       $args->{'indentString'} = setDefault($args->{'indentString'}, "<img src='/adm/lonIcons/whitespace1.gif' width='25' height='1' alt='' border='0' />");
       $args->{'displayedHereMarker'} = 0;
   
       my $displayedJumpMarker = 0;
       # Set up iteration.
       my $depth = 1;
       $it->next(); # discard initial BEGIN_MAP
       my $curRes = $it->next();
       my $now = time();
       my $in24Hours = $now + 24 * 60 * 60;
       my $rownum = 0;
   
       # export "here" marker information
       $args->{'here'} = $here;
       $args->{'hereType'} = $hereType;
   
       while ($depth > 0) {
           if ($curRes == $it->BEGIN_MAP()) { $depth++; }
           if ($curRes == $it->END_MAP()) { $depth--; }
   
           # Maintain indentation level.
           if ($curRes == $it->BEGIN_MAP() ||
               $curRes == $it->BEGIN_BRANCH() ) {
               $args->{'indentLevel'}++;
           }
           if ($curRes == $it->END_MAP() ||
               $curRes == $it->END_BRANCH() ) {
               $args->{'indentLevel'}--;
           }
           # Notice new branches
           if ($curRes == $it->BEGIN_BRANCH()) {
               $args->{'isNewBranch'} = 1;
           }
   
           # If this isn't an actual resource, continue on
           if (!ref($curRes)) {
               $curRes = $it->next();
               next;
           }
   
           $args->{'counter'}++;
   
           # Does it have multiple parts?
           $args->{'multipart'} = 0;
           $args->{'condensed'} = 0;
           my @parts;
               
           # Decide what parts to show.
           if ($curRes->is_problem() && $showParts) {
               @parts = @{$curRes->parts()};
               $args->{'multipart'} = scalar(@parts) > 1;
               
               if ($condenseParts) { # do the condensation
                   if (!$curRes->opendate("0")) {
                       @parts = ("0");
                       $args->{'condensed'} = 1;
                   }
                   if (!$args->{'condensed'}) {
                       # Decide whether to condense based on similarity
                       my $status = $curRes->status($parts[1]);
                       my $due = $curRes->duedate($parts[1]);
                       my $open = $curRes->opendate($parts[1]);
                       my $statusAllSame = 1;
                       my $dueAllSame = 1;
                       my $openAllSame = 1;
                       for (my $i = 2; $i < scalar(@parts); $i++) {
                           if ($curRes->status($parts[$i]) != $status){
                               $statusAllSame = 0;
                           }
                           if ($curRes->duedate($parts[$i]) != $due ) {
                               $dueAllSame = 0;
                           }
                           if ($curRes->opendate($parts[$i]) != $open) {
                               $openAllSame = 0;
                           }
                       }
                       # $*allSame is true if all the statuses were
                       # the same. Now, if they are all the same and
                       # match one of the statuses to condense, or they
                       # are all open with the same due date, or they are
                       # all OPEN_LATER with the same open date, display the
                       # status of the first non-zero part (to get the 'correct'
                       # status right, since 0 is never 'correct' or 'open').
                       if (($statusAllSame && defined($condenseStatuses{$status})) ||
                           ($dueAllSame && $status == $curRes->OPEN && $statusAllSame)||
                           ($openAllSame && $status == $curRes->OPEN_LATER && $statusAllSame) ){
                           @parts = ($parts[1]);
                           $args->{'condensed'} = 1;
                       }
                       
                   }
               }
               
           } else {
               # Not showing parts
               @parts = ("0"); # show main part only
           }
   
           # If the multipart problem was condensed, "forget" it was multipart
           if (scalar(@parts) == 1) {
               $args->{'multipart'} = 0;
           }
   
           # In the event of a network error, display one part.
           # If this is a single part, we can at least show the correct
           # status, but if it's multipart, we're lost, since we can't
           # retreive the metadata to count the parts
           if ($curRes->{RESOURCE_ERROR}) {
               @parts = ("0");
           }
   
           # Now, we've decided what parts to show. Loop through them and
           # show them.
           foreach my $part (@parts) {
               $rownum ++;
               my $backgroundColor = $backgroundColors[$rownum % scalar(@backgroundColors)];
               
               $result .= "  <tr bgcolor='$backgroundColor'>\n";
   
               # Set up some data about the parts that the cols might want
               my $filter = $it->{FILTER};
               my $stack = $it->getStack();
               my $src = getLinkForResource($stack);
               
               my $srcHasQuestion = $src =~ /\?/;
               $args->{"resourceLink"} = $src.
                   ($srcHasQuestion?'&':'?') .
                   'symb=' . &Apache::lonnet::escape($curRes->symb());
               
               # Now, display each column.
               foreach my $col (@$cols) {
                   my $colHTML = '';
                   if (ref($col)) {
                       $colHTML .= &$col($curRes, $part, $args);
                   } else {
                       $colHTML .= &{$preparedColumns[$col]}($curRes, $part, $args);
                   }
   
                   # If this is the first column and it's time to print
                   # the anchor, do so
                   if ($col == $cols->[0] && 
                       $args->{'counter'} == $args->{'currentJumpIndex'} - 
                       $currentJumpDelta) {
                       # Jam the anchor after the <td> tag;
                       # necessary for valid HTML (which Mozilla requires)
                       $colHTML =~ s/\>/\>\<a name="curloc" \/\>/;
                       $displayedJumpMarker = 1;
                   }
                   $result .= $colHTML . "\n";
               }
               $result .= "    </tr>\n";
               $args->{'isNewBranch'} = 0;
           }
           
           if ($r && $rownum % 20 == 0) {
               $r->print($result);
               $result = "";
               $r->rflush();
           }
           
           $curRes = $it->next();
       }
       
       # Print out the part that jumps to #curloc if it exists
       if ($displayedJumpMarker) {
           $result .= "<script>location += \"#curloc\";</script>\n";
       }
   
       $result .= "</table>";
       
       if ($r) {
           $r->print($result);
           $result = "";
           $r->rflush();
       }
           
       if ($mustCloseNavMap) { $navmap->untieHashes(); } 
   
       return $result;
   }
   
 1;  1;
   
 package Apache::lonnavmaps::navmap;  package Apache::lonnavmaps::navmap;
Line 1015  sub new { Line 1231  sub new {
     $self->{HASH_TIED} = 1;      $self->{HASH_TIED} = 1;
     $self->{NAV_HASH} = \%navmaphash;      $self->{NAV_HASH} = \%navmaphash;
     $self->{PARM_HASH} = \%parmhash;      $self->{PARM_HASH} = \%parmhash;
       $self->{INITED} = 0;
   
     bless($self);      bless($self);
                   
Line 1023  sub new { Line 1240  sub new {
   
 sub init {  sub init {
     my $self = shift;      my $self = shift;
       if ($self->{INITED}) { return; }
   
     # If the course opt hash and the user opt hash should be generated,      # If the course opt hash and the user opt hash should be generated,
     # generate them      # generate them
Line 1128  sub init { Line 1346  sub init {
     }          }    
   
     $self->{PARM_CACHE} = {};      $self->{PARM_CACHE} = {};
       $self->{INITED} = 1;
 }  }
   
 # Internal function: Takes a key to look up in the nav hash and implements internal  # Internal function: Takes a key to look up in the nav hash and implements internal
Line 1222  sub getById { Line 1441  sub getById {
     }      }
   
     # resource handles inserting itself into cache.      # resource handles inserting itself into cache.
     return Apache::lonnavmaps::resource->new($self, $id);      # Not clear why the quotes are necessary, but as of this
       # writing it doesn't work without them.
       return "Apache::lonnavmaps::resource"->new($self, $id);
 }  }
   
 =pod  =pod
Line 1349  sub parmval_real { Line 1570  sub parmval_real {
     return '';      return '';
 }  }
   
   
 1;  
   
 package Apache::lonnavmaps::renderer;  
   
 =pod  
   
 =head1 navmap renderer  
   
 The navmaprenderer package provides a sophisticated rendering of the standard navigation maps interface into HTML. The provided nav map handler is actually just a glorified call to this.   
   
 Because of the large number of parameters this function presents, instead of passing it arguments as is normal, pass it in an anonymous hash with the given options. This is because there is no obvious order you may wish to override these in and a hash is easier to read and understand then "undef, undef, undef, 1, undef, undef, renderButton, undef, 0" when you mostly want default behaviors.  
   
 The package provides a function called 'render', called as Apache::lonnavmaps::renderer->render({}).  
   
 =head2 Overview of Columns  
   
 The renderer will build an HTML table for the navmap and return it. The table is consists of several columns, and a row for each resource (or possibly each part). You tell the renderer how many columns to create and what to place in each column, optionally using one or more of the preparent columns, and the renderer will assemble the table.  
   
 Any additional generally useful column types should be placed in the renderer code here, so anybody can use it anywhere else. Any code specific to the current application (such as the addition of <input> elements in a column) should be placed in the code of the thing using the renderer.  
   
 At the core of the renderer is the array reference COLS (see Example section below for how to pass this correctly). The COLS array will consist of entries of one of two types of things: Either an integer representing one of the pre-packaged column types, or a sub reference that takes a resource reference, a part number, and a reference to the argument hash passed to the renderer, and returns a string that will be inserted into the HTML representation as it.  
   
 The pre-packaged column names are refered to by constants in the Apache::lonnavmaps::renderer namespace. The following currently exist:  
   
 =over 4  
   
 =item * B<resource>: The general info about the resource: Link, icon for the type, etc. The first column in the standard nav map display. This column also accepts the following parameter in the renderer hash:  
   
 =over 4  
   
 =item * B<resource_nolink>: If true, the resource will not be linked. Default: false, resource will have links.  
   
 =item * B<resource_part_count>: If true (default), the resource will show a part count if the full part list is not displayed. If false, the resource will never show a part count.  
   
 =back  
   
 =item B<communication_status>: Whether there is discussion on the resource, email for the user, or (lumped in here) perl errors in the execution of the problem. This is the second column in the main nav map.  
   
 =item B<quick_status>: An icon for the status of a problem, with four possible states: Correct, incorrect, open, or none (not open yet, not a problem). The third column of the standard navmap.  
   
 =item B<long_status>: A text readout of the details of the current status of the problem, such as "Due in 22 hours". The fourth column of the standard navmap.  
   
 =back  
   
 If you add any others please be sure to document them here.  
   
 An example of a column renderer that will show the ID number of a resource, along with the part name if any:  
   
  sub {   
   my ($resource, $part, $params) = @_;     
   if ($part) { return '<td>' . $resource->{ID} . ' ' . $part . '</td>'; }  
   return '<td>' . $resource->{ID} . '</td>';  
  }  
   
 Note these functions are responsible for the TD tags, which allow them to override vertical and horizontal alignment, etc.  
   
 =head2 Parameters  
   
 =over 4  
   
 =item * B<iterator>: A reference to a fresh ::iterator to use from the navmaps. The rendering will reflect the options passed to the iterator, so you can use that to just render a certain part of the course, if you like.  
   
 =item * B<cols>: An array reference  
   
 =item * B<showParts>: A flag. If yes (default), a line for the resource itself, and a line for each part will be displayed. If not, only one line for each resource will be displayed.  
   
 =item * B<condenseParts>: A flag. If yes (default), if all parts of the problem have the same status and that status is Nothing Set, Correct, or Network Failure, then only one line will be displayed for that resource anyhow. If no, all parts will always be displayed. If showParts is 0, this is ignored.  
   
 =item * B<jumpCount>: A string identifying the URL to place the anchor 'curloc' at. Default to no anchor at all. It is the responsibility of the renderer user to ensure that the #curloc is in the URL.  
   
 =item * B<hereURL>: A URL identifying where to place the 'here' marker.  
   
 =item * B<hereSymb>: A Symb identifying where to place the 'here' marker.  
   
 =item * B<indentString>: A string identifying the indentation string to use. By default, this is a 25 pixel whitespace image with no alt text.  
   
 =back  
   
 =cut  
   
 sub resource { return 0; }  
 sub communication_status { return 1; }  
 sub quick_status { return 2; }  
 sub long_status { return 3; }  
   
 sub setDefault {  
     my ($val, $default) = @_;  
     if (!defined($val)) { return $default; }  
     return $val;  
 }  
   
 sub render {  
     my $args = shift;  
       
     # Configure the renderer.  
     my $cols = $args->{'cols'};  
     if (!defined($cols)) {  
         # no columns, no nav maps.  
         return '';  
     }  
     my $it = $args->{'iterator'};  
     if (!defined($it)) {  
         # no iterator, no nav map.  
         return '';  
     }  
       
     my $showParts = setDefault($args->{'showParts'}, 1);  
     my $condenseParts = setDefault($args->{'condenseParts'}, 1);  
     my $jumpToURL = $args->{'jumpToURL'};  
     my $jumpToSymb = $args->{'jumpToSymb'};  
     my $indentString = setDefault($args->{'indentString'}, "<img src='/adm/lonIcons/whitespace1.gif' width='25' height='1' alt='' border='0' />");  
   
     # End parameter setting  
   
     # Data  
     my $result .= '<table cellspacing="0" cellpadding="3" border="0" bgcolor="#FFFFFF">' ."\n";  
     my $res = "Apache::lonnavmaps::resource";  
     my %condenseStatuses =  
         ( $res->NETWORK_FAILURE    => 1,  
           $res->NOTHING_SET        => 1,  
           $res->CORRECT            => 1 );  
     my @backgroundColors = ("#FFFFFF", "#F6F6F6");  
   
     # Set up iteration.  
     my $depth = 1;  
     $it->next(); # discard initial BEGIN_MAP  
     my $curRes = $it->next();  
     my $indentLevel = 0;  
     my $isNewBranch = 0;  
     my $now = time();  
     my $in24Hours = $now + 24 * 60 * 60;  
     my $displayedHereMarker = 0;  
     my $displayedJumpMarker = 0;  
     my $rownum = 0;  
   
     while ($depth > 0) {  
         if ($curRes == $it->BEGIN_MAP()) { $depth++; }  
         if ($curRes == $it->END_MAP()) { $depth--; }  
   
         # Maintain indentation level.  
         if ($curRes == $it->BEGIN_MAP() ||  
             $curRes == $it->BEGIN_BRANCH() ) {  
             indentLevel++;  
         }  
         if ($curRes == $it->END_MAP() ||  
             $curRes == $it->END_BRANCH() ) {  
             $indentLevel--;  
         }  
         # Notice new branches  
         if ($curRes == $it->BEGIN_BRANCH()) {  
             $isNewBranch = 1;  
         }  
           
         my $deltalevel = $isNewBranch? 1 : 0; # reserve space for branch symbol  
         if ($indentLevel - $deltalevel < 0) {  
             # If this would be at a negative depth (top-level maps in  
             # new-style courses, we want to suppress their title display)  
             # then ignore it.  
             $curRes = $it->next();  
             next;  
         }  
   
         # Does it have multiple parts?  
         my $multipart = 0;  
         my $condensed = 0;  
         my @parts;  
               
         # Decide what parts to show.  
         if ($showParts) {  
             @parts = @{$curRes->parts()};  
             $multipart = scalar(@parts) > 1;  
               
             if ($condenseParts) { # do the condensation  
                 if (!$curRes->opendate("0")) {  
                     @parts = ("0");  
                     $condensed = 1;  
                 }  
                 if (!$condensed) {  
                     # Decide whether to condense based on similarity  
                     my $status = $curRes->status($parts[1]);  
                     my $due = $curRes->duedate($parts[1]);  
                     my $open = $curRes->opendate($parts[1]);  
                     my $statusAllSame = 1;  
                     my $dueAllSame = 1;  
                     my $openAllSame = 1;  
                     for (my $i = 2; $i < scalar(@parts); $i++) {  
                         if ($curRes->status($parts[$i]) != $status){  
                             $statusAllSame = 0;  
                         }  
                         if ($curRes->duedate($parts[$i]) != $due ) {  
                             $dueAllSame = 0;  
                         }  
                         if ($curRes->opendate($parts[$i]) != $open) {  
                             $openAllSame = 0;  
                         }  
                     }  
                     # $*allSame is true if all the statuses were  
                     # the same. Now, if they are all the same and  
                     # match one of the statuses to condense, or they  
                     # are all open with the same due date, or they are  
                     # all OPEN_LATER with the same open date, display the  
                     # status of the first non-zero part (to get the 'correct'  
                     # status right, since 0 is never 'correct' or 'open').  
                     if (($statusAllSame && defined($condenseStatuses{$status})) ||  
                         ($dueAllSame && $status == $curRes->OPEN && $statusAllSame)||  
                         ($openAllSame && $status == $curRes->OPEN_LATER && $statusAllSame) ){  
                         @parts = ($parts[1]);  
                         $condensed = 1;  
                     }  
                       
                 }  
             }  
               
         } else {  
             # Not showing parts  
             @parts = ("0"); # show main part only  
         }  
   
         # If the multipart problem was condensed, "forget" it was multipart  
         if (scalar(@parts) == 1) {  
             $multipart = 0;  
         }  
   
         # In the event of a network error, display one part.  
         # If this is a single part, we can at least show the correct  
         # status, but if it's multipart, we're lost, since we can't  
         # retreive the metadata to count the parts  
         if ($curRes->{RESOURCE_ERROR}) {  
             @parts = ("0");  
         }  
   
         # Now, we've decided what parts to show. Loop through them and  
         # show them.  
         foreach my $part (@parts) {  
             $rownum ++;  
             my $backgroundColor = $backgroundColors[$rownum % scalar(@backgroundColors)];  
               
             $result .= "  <tr bgcolor='$backgroundColor'>\n";  
               
             # Now, display each column.  
             foreach my $col (@$cols) {  
                 $result .= "    <td>";  
   
                 # Decide what to display  
                   
   
                 $result .= "</td>\n";  
             }  
   
             $result .= "  </tr>\n";  
         }  
           
   
         $curRes = $it->next();  
     }  
       
     $result .= "</table>";  
   
     return $result;  
 }  
   
 sub render_resource {  
     my ($resource, $part, $params) = @_;  
     return "<td align='center'>resource</td>";  
 }  
 sub render_communication_status {  
     my ($resource, $part, $params) = @_;  
     return "<td align='center'>comm_status</td>";  
 }  
 sub render_quick_status {  
     my ($resource, $part, $params) = @_;  
     return "<td align='center'>quick_status</td>";  
 }  
 sub render_long_status {  
     my ($resource, $part, $params) = @_;  
     return "<td align='center'>long_status</td>";  
 }  
   
 my @preparedColumns = (\&render_resource, \&render_communication_status,  
                        \&render_quick_status, \&render_long_status);  
   
 1;  1;
   
 package Apache::lonnavmaps::iterator;  package Apache::lonnavmaps::iterator;
Line 1973  sub next { Line 1912  sub next {
     # If this is a blank resource, don't actually return it.      # If this is a blank resource, don't actually return it.
     # Should you ever find you need it, make sure to add an option to the code      # Should you ever find you need it, make sure to add an option to the code
     #  that you can use; other things depend on this behavior.      #  that you can use; other things depend on this behavior.
     if (!$self->{HERE}->src() || !$self->{HERE}->browsePriv()) {      my $browsePriv = $self->{HERE}->browsePriv();
       if (!$self->{HERE}->src() || 
           (!($browsePriv eq 'F') && !($browsePriv eq '2')) ) {
         return $self->next();          return $self->next();
     }      }
   
Line 2057  sub new { Line 1998  sub new {
   
     # A hash, used as a set, of resource already seen      # A hash, used as a set, of resource already seen
     $self->{ALREADY_SEEN} = shift;      $self->{ALREADY_SEEN} = shift;
     if (!defined($self->{ALREADY_SEEN})) { $self->{ALREADY_SEEN} = {} };       if (!defined($self->{ALREADY_SEEN})) { $self->{ALREADY_SEEN} = {} };
     $self->{CONDITION} = shift;      $self->{CONDITION} = shift;
     $self->{DIRECTION} = shift || FORWARD();      $self->{DIRECTION} = shift || FORWARD();
   
Line 2180  A resource object encapsulates a resourc Line 2121  A resource object encapsulates a resourc
   
 A resource only makes sense in the context of a navmap, as some of the data is stored in the navmap object.  A resource only makes sense in the context of a navmap, as some of the data is stored in the navmap object.
   
 You will probably never need to instantiate this object directly. Use Apache::lonnavmap::navmap, and use the "start" method to obtain the starting resource.  You will probably never need to instantiate this object directly. Use Apache::lonnavmaps::navmap, and use the "start" method to obtain the starting resource.
   
 =head2 Public Members  =head2 Public Members
   
Line 2311  These methods are shortcuts to deciding Line 2252  These methods are shortcuts to deciding
   
 =item * B<is_page>: Returns true if the resource is a page.  =item * B<is_page>: Returns true if the resource is a page.
   
 =item * B<is_problem>: Returns true if the resource is a problem.  
   
 =item * B<is_sequence>: Returns true if the resource is a sequence.  =item * B<is_sequence>: Returns true if the resource is a sequence.
   
 =back  =back
Removed from v.1.132  
changed lines
  Added in v.1.141

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>