--- loncom/interface/lonnavmaps.pm 2002/10/11 18:39:55 1.73 +++ loncom/interface/lonnavmaps.pm 2003/03/20 20:40:42 1.129.2.2 @@ -2,7 +2,7 @@ # The LearningOnline Network with CAPA # Navigate Maps Handler # -# $Id: lonnavmaps.pm,v 1.73 2002/10/11 18:39:55 bowersj2 Exp $ +# $Id: lonnavmaps.pm,v 1.129.2.2 2003/03/20 20:40:42 albertel Exp $ # # Copyright Michigan State University Board of Trustees # @@ -37,381 +37,26 @@ # 3/1/1,6/1,17/1,29/1,30/1,2/8,9/21,9/24,9/25 Gerd Kortemeyer # YEAR=2002 # 1/1 Gerd Kortemeyer -# +# Oct-Nov Jeremy Bowers package Apache::lonnavmaps; use strict; use Apache::Constants qw(:common :http); -use Apache::lonnet(); use Apache::loncommon(); -use GDBM_File; use POSIX qw (floor strftime); -# -------------------------------------------------------------- Module Globals -my %hash; -my @rows; - -# -# These cache hashes need to be independent of user, resource and course -# (user and course can/should be in the keys) -# - -my %courserdatas; -my %userrdatas; - -# -# These global hashes are dependent on user, course and resource, -# and need to be initialized every time when a sheet is calculated -# -my %courseopt; -my %useropt; -my %parmhash; - -# This parameter keeps track of whether obtaining the user's information -# failed, which the colorizer in astatus can use -my $networkFailedFlag = 0; - -# ------------------------------------------------------------------ Euclid gcd - -sub euclid { - my ($e,$f)=@_; - my $a; my $b; my $r; - if ($e>$f) { $b=$e; $r=$f; } else { $r=$e; $b=$f; } - while ($r!=0) { - $a=$b; $b=$r; - $r=$a%$b; - } - return $b; -} - -# --------------------------------------------------------------------- Parmval - -# -------------------------------------------- Figure out a cascading parameter -# -# For this function to work -# -# * parmhash needs to be tied -# * courseopt and useropt need to be initialized for this user and course -# - -sub parmval { - my ($what,$symb)=@_; - my $cid=$ENV{'request.course.id'}; - my $csec=$ENV{'request.course.sec'}; - my $uname=$ENV{'user.name'}; - my $udom=$ENV{'user.domain'}; - - unless ($symb) { return ''; } - my $result=''; - - my ($mapname,$id,$fn)=split(/\_\_\_/,$symb); - -# ----------------------------------------------------- Cascading lookup scheme - my $rwhat=$what; - $what=~s/^parameter\_//; - $what=~s/\_/\./; - - my $symbparm=$symb.'.'.$what; - my $mapparm=$mapname.'___(all).'.$what; - my $usercourseprefix=$uname.'_'.$udom.'_'.$cid; - - my $seclevel= $usercourseprefix.'.['.$csec.'].'.$what; - my $seclevelr=$usercourseprefix.'.['.$csec.'].'.$symbparm; - my $seclevelm=$usercourseprefix.'.['.$csec.'].'.$mapparm; - - my $courselevel= $usercourseprefix.'.'.$what; - my $courselevelr=$usercourseprefix.'.'.$symbparm; - my $courselevelm=$usercourseprefix.'.'.$mapparm; - -# ---------------------------------------------------------- first, check user - if (defined($uname)) { - if (defined($useropt{$courselevelr})) { return $useropt{$courselevelr}; } - if (defined($useropt{$courselevelm})) { return $useropt{$courselevelm}; } - if (defined($useropt{$courselevel})) { return $useropt{$courselevel}; } - } - -# ------------------------------------------------------- second, check course - if (defined($csec)) { - if (defined($courseopt{$seclevelr})) { return $courseopt{$seclevelr}; } - if (defined($courseopt{$seclevelm})) { return $courseopt{$seclevelm}; } - if (defined($courseopt{$seclevel})) { return $courseopt{$seclevel}; } - } - - if (defined($courseopt{$courselevelr})) { return $courseopt{$courselevelr}; } - if (defined($courseopt{$courselevelm})) { return $courseopt{$courselevelm}; } - if (defined($courseopt{$courselevel})) { return $courseopt{$courselevel}; } - -# ----------------------------------------------------- third, check map parms - - my $thisparm=$parmhash{$symbparm}; - if (defined($thisparm)) { return $thisparm; } - -# ----------------------------------------------------- fourth , check default - - my $default=&Apache::lonnet::metadata($fn,$rwhat.'.default'); - if (defined($default)) { return $default} - -# --------------------------------------------------- fifth , cascade up parts - - my ($space,@qualifier)=split(/\./,$rwhat); - my $qualifier=join('.',@qualifier); - unless ($space eq '0') { - my ($part,$id)=split(/\_/,$space); - if ($id) { - my $partgeneral=&parmval($part.".$qualifier",$symb); - if (defined($partgeneral)) { return $partgeneral; } - } else { - my $resourcegeneral=&parmval("0.$qualifier",$symb); - if (defined($resourcegeneral)) { return $resourcegeneral; } - } - } - return ''; -} - - - -# ------------------------------------------------------------- Find out status -# return codes -# tcode (timecode) -# 1: will open later -# 2: is open and not past due yet -# 3: is past due date -# 4: due in the next 24 hours -# -# code (curent solved status) -# 1: not attempted -# 2: attempted but wrong, or incorrect by instructor -# 3: solved or correct by instructor -# 4: partially correct (one or more parts correct) -# "excused" needs to be supported, but is not yet. -sub astatus { - my $rid=shift; - my $code=0; - my $ctext=''; - $rid=~/(\d+)\.(\d+)/; - my $symb=&Apache::lonnet::declutter($hash{'map_id_'.$1}).'___'.$2.'___'. - &Apache::lonnet::declutter($hash{'src_'.$rid}); - my %duedate=(); - my %opendate=(); - my %answerdate=(); - # need to always check part 0's open/due/answer status - foreach (sort(split(/\,/,&Apache::lonnet::metadata($hash{'src_'.$rid},'allpo\ssiblekeys')))) { - if ($_=~/^parameter\_(.*)\_opendate$/) { - my $part=$1; - $duedate{$part}=&parmval($part.'.duedate',$symb); - $opendate{$part}=&parmval($part.'.opendate',$symb); - $answerdate{$part}=&parmval($part.'.answerdate',$symb); - if (&parmval($part.'.opendate.type',$symb) eq 'date_interval') { - $opendate{$part}=$duedate{$part}-$opendate{$part}; - } - if (&parmval($part.'.answerdate.type',$symb) eq 'date_interval') { - $answerdate{$part}=$duedate{$part}+$answerdate{$part}; - } - } - } - my $now=time; - my $tcode=0; - - my %returnhash=&Apache::lonnet::restore($symb); - - foreach (sort(keys(%opendate))) { - my $duedate=$duedate{$_}; - my $opendate=$opendate{$_}; - my $answerdate=$answerdate{$_}; - my $preface=''; - unless ($_ eq '0') { $preface=' Part: '.$_.' '; } - if ($opendate) { - if ($now<$duedate || (!$duedate)) { - unless ($tcode==4) { $tcode=2; } - if ($duedate) { - $ctext.=$preface.'Due: '.localtime($duedate); - } else { - $ctext.=$preface.'No Due Date'; - } - if ($now<$opendate) { - unless ($tcode) { $tcode=1; } - $ctext.=$preface.'Open: '.localtime($opendate); - } - if ($duedate && $duedate-$now<86400) { - $tcode=4; - $ctext.=$preface.'Due: '.localtime($duedate); - } - } else { - unless (($tcode==4) || ($tcode eq 2)) { $tcode=3; } - if ($now<$answerdate) { - $ctext.='Answer: '.localtime($duedate); - } - } - } else { - unless (($tcode==2) || ($tcode==4)) { $tcode=1; } - } - - my $status=$returnhash{'resource.'.$_.'.solved'}; - - if ($status eq 'correct_by_student') { - if ($code==0||$code==3) { $code=3; } else { $code=4; } - $ctext.=' solved'; - } elsif ($status eq 'correct_by_override') { - if ($code==0||$code==3) { $code=3; } else { $code=4; } - $ctext.=' override'; - } elsif ($status eq 'incorrect_attempted') { - if ($code!=4 && $code!=3) { $code=2; } - if ($code==3) { $code=4; } - $ctext.=' ('. - ($returnhash{'resource.'.$_.'.tries'}? - $returnhash{'resource.'.$_.'.tries'}:'0'); - my $numtries = &parmval($_.'.maxtries',$symb); - if ($numtries) { $ctext.='/'.$numtries.' tries'; } - $ctext.=')'; - } elsif ($status eq 'incorrect_by_override') { - if ($code!=4 && $code!=3) { $code=2; } - if ($code==3) { $code=4; } - $ctext.=' override'; - } elsif ($status eq 'excused') { - if ($code==0||$code==3) { $code=3; } else { $code=4; } - $ctext.=' excused'; - } else { - if ($code==0) { $code=1; } - } - } - - return 'p'.$code.$tcode.'"'.$ctext.'"'; -} - - -sub addresource { - my ($resource,$sofar,$rid,$showtypes,$indent,$linkid)=@_; - if ($showtypes eq 'problems') { - if ($resource!~/\.(problem|exam|quiz|assess|survey|form)$/) { - return; - } - } - my $brepriv=&Apache::lonnet::allowed('bre',$resource); - if ($hash{'src_'.$rid}) { - if (($brepriv eq '2') || ($brepriv eq 'F')) { - my $pprefix=''; - if ($resource=~/\.(problem|exam|quiz|assess|survey|form)$/) { - $pprefix=&astatus($rid); - } - $$sofar++; - if ($indent) { $pprefix='i'.$indent.','.$pprefix; } - if ($linkid) { $pprefix='l'.$linkid.','.$pprefix; } - if (defined($rows[$$sofar])) { - $rows[$$sofar].='&'.$pprefix.$rid; - } else { - $rows[$$sofar]=$pprefix.$rid; - } - } - } -} - -sub followlinks () { - my ($rid,$sofar,$beenhere,$further,$showtypes,$indent,$linkid)=@_; - my $mincond=1; - my $next=''; - foreach (split(/\,/,$hash{'to_'.$rid})) { - my $thiscond= - &Apache::lonnet::directcondval($hash{'condid_'.$hash{'undercond_'.$_}}); - if ($thiscond>=$mincond) { - if ($next) { - $next.=','.$_.':'.$thiscond; - } else { - $next=$_.':'.$thiscond; - } - if ($thiscond>$mincond) { $mincond=$thiscond; } - } - } - my $col=0; - &Apache::lonxml::debug("following links -$next-"); - foreach (split(/\,/,$next)) { - my ($nextlinkid,$condval)=split(/\:/,$_); - if ($condval>=$mincond) { - my $now=&tracetable($sofar,$hash{'goesto_'.$nextlinkid}, - $beenhere,$showtypes,$indent,$linkid); - if ($now>$further) { - if ($col>0) { - my $string; - for(my $i=0;$i<$col;$i++) { $string.='&'; } - for(my $i=$further+1;$now-1>$i;$i++) { - $rows[$i]=$string.$rows[$i]; - } - } - $further=$now; - } - } - $col++; - } - return $further; -} -# ------------------------------------------------------------ Build page table - -sub tracetable { - my ($sofar,$rid,$beenhere,$showtypes,$indent,$linkid)=@_; - my $newshowtypes=$showtypes; - my $further=$sofar; -# $Apache::lonxml::debug=1; - &Apache::lonxml::debug("$rid ; $linkid ; $sofar ; $beenhere ; ".$hash{'src_'.$rid}); - if ($beenhere=~/\&$rid\&/) { return $further; } - $beenhere.=$rid.'&'; - - if (defined($hash{'is_map_'.$rid})) { - $sofar++; - my $tprefix=''; - if ($hash{'map_type_'.$hash{'map_pc_'.$hash{'src_'.$rid}}} - eq 'sequence') { - $tprefix='h'; - } elsif ($hash{'map_type_'.$hash{'map_pc_'.$hash{'src_'.$rid}}} - eq 'page') { - $tprefix='j'; - if ($indent) { $tprefix='i'.$indent.','.$tprefix; } - if ($linkid) { $tprefix='l'.$linkid.','.$tprefix; } - $newshowtypes='problems'; - $indent++; - #if in a .page continue to link the encompising .page - if (!$linkid) { $linkid=$rid; } - } - if (defined($rows[$sofar])) { - $rows[$sofar].='&'.$tprefix.$rid; - } else { - $rows[$sofar]=$tprefix.$rid; - } - if ((defined($hash{'map_start_'.$hash{'src_'.$rid}})) && - (defined($hash{'map_finish_'.$hash{'src_'.$rid}}))) { - my $frid=$hash{'map_finish_'.$hash{'src_'.$rid}}; - $sofar=&tracetable($sofar,$hash{'map_start_'.$hash{'src_'.$rid}}, - '&'.$frid.'&',$newshowtypes,$indent,$linkid); - &addresource($hash{'src_'.$frid},\$sofar,$frid,$newshowtypes, - $indent,$linkid); - if ($tprefix =~ /j$/) { $indent--; $linkid=''; } - } - } else { - &addresource($hash{'src_'.$rid},\$sofar,$rid,$showtypes, - $indent,$linkid); - } - - if (defined($hash{'to_'.$rid})) { - $further=&followlinks($rid,$sofar,$beenhere,$further,$showtypes, - $indent,$linkid); - } - - return $further; +sub handler { + my $r = shift; + real_handler($r); } -# ================================================================ Main Handler - -sub handler { - my $r=shift; +sub real_handler { + my $r = shift; &Apache::loncommon::get_unprocessed_cgi($ENV{QUERY_STRING}); - if ($ENV{'form.jtest'} ne "1") - { - return new_handle($r); - } - -# ------------------------------------------- Set document type for header only - + # Handle header-only request if ($r->header_only) { if ($ENV{'browser.mathml'}) { $r->content_type('text/xml'); @@ -421,28 +66,8 @@ sub handler { $r->send_http_header; return OK; } - my $requrl=$r->uri; - my $hashtied; -# ----------------------------------------------------------------- Tie db file - my $fn; - if ($ENV{'request.course.fn'}) { - $fn=$ENV{'request.course.fn'}; - if (-e "$fn.db") { - if ((tie(%hash,'GDBM_File',"$fn.db",&GDBM_READER(),0640)) && - (tie(%parmhash,'GDBM_File', - $ENV{'request.course.fn'}.'_parms.db', - &GDBM_READER(),0640))) { - $hashtied=1; - } - } - } - if (!$hashtied) { - $ENV{'user.error.msg'}="$requrl:bre:0:0:Course not initialized"; - return HTTP_NOT_ACCEPTABLE; - } - -# ------------------------------------------------------------------- Hash tied + # Send header, don't cache this page if ($ENV{'browser.mathml'}) { $r->content_type('text/xml'); } else { @@ -451,408 +76,112 @@ sub handler { &Apache::loncommon::no_cache($r); $r->send_http_header; - my $firstres=$hash{'map_start_'. - &Apache::lonnet::clutter($ENV{'request.course.uri'})}; - my $lastres=$hash{'map_finish_'. - &Apache::lonnet::clutter($ENV{'request.course.uri'})}; - if (!(($firstres) && ($lastres))) { - $r->print('Coursemap undefined.'); - } else { - -# ----------------------------------------------------------------- Render page -# -------------------------------------------------------------- Set parameters - - -# ---------------------------- initialize coursedata and userdata for this user - undef %courseopt; - undef %useropt; - - my $uname=$ENV{'user.name'}; - my $udom=$ENV{'user.domain'}; - my $uhome=$ENV{'user.home'}; - my $cid=$ENV{'request.course.id'}; - my $chome=$ENV{'course.'.$cid.'.home'}; - my ($cdom,$cnum)=split(/\_/,$cid); - - my $userprefix=$uname.'_'.$udom.'_'; - - unless ($uhome eq 'no_host') { -# ------------------------------------------------- Get coursedata (if present) - unless ((time-$courserdatas{$cid.'.last_cache'})<240) { - my $reply=&Apache::lonnet::reply('dump:'.$cdom.':'.$cnum. - ':resourcedata',$chome); - if ($reply!~/^error\:/) { - $courserdatas{$cid}=$reply; - $courserdatas{$cid.'.last_cache'}=time; - } - # check to see if network failed - elsif ( $reply=~/no.such.host/i || $reply=~/con.*lost/i ) - { - $networkFailedFlag = 1; - } - } - foreach (split(/\&/,$courserdatas{$cid})) { - my ($name,$value)=split(/\=/,$_); - $courseopt{$userprefix.&Apache::lonnet::unescape($name)}= - &Apache::lonnet::unescape($value); - } -# --------------------------------------------------- Get userdata (if present) - unless ((time-$userrdatas{$uname.'___'.$udom.'.last_cache'})<240) { - my $reply=&Apache::lonnet::reply('dump:'.$udom.':'.$uname.':resourcedata',$uhome); - if ($reply!~/^error\:/) { - $userrdatas{$uname.'___'.$udom}=$reply; - $userrdatas{$uname.'___'.$udom.'.last_cache'}=time; - } - } - foreach (split(/\&/,$userrdatas{$uname.'___'.$udom})) { - my ($name,$value)=split(/\=/,$_); - $useropt{$userprefix.&Apache::lonnet::unescape($name)}= - &Apache::lonnet::unescape($value); - } - } + # Create the nav map + my $navmap = Apache::lonnavmaps::navmap->new( + $ENV{"request.course.fn"}.".db", + $ENV{"request.course.fn"}."_parms.db", 1, 1); - @rows=(); - &tracetable(0,$firstres,'&','',0); + if (!defined($navmap)) { + my $requrl = $r->uri; + $ENV{'user.error.msg'} = "$requrl:bre:0:0:Course not initialized"; + return HTTP_NOT_ACCEPTABLE; + } -# ------------------------------------------------------------------ Page parms + $r->print("\n"); + $r->print("Navigate Course Contents"); - my $j; - my $i; - my $lcm=1; - my $contents=0; + # Header + $r->print(&Apache::loncommon::bodytag('Navigate Course Contents','', + '')); + $r->print(''); -# ---------------------------------------------- Go through table to get layout + $r->rflush(); - for ($i=0;$i<=$#rows;$i++) { - if ($rows[$i]) { - &Apache::lonxml::debug("Row $i is:".$rows[$i]); - $contents++; - my @colcont=split(/\&/,$rows[$i]); - $lcm*=($#colcont+1)/euclid($lcm,($#colcont+1)); - } - } + # Now that we've displayed some stuff to the user, init the navmap + $navmap->init(); + $r->print(''); + my $date=localtime; + $r->print(''); - unless ($contents) { - $r->print('Empty Map.'); - } else { + # Print discussions and feedback header + if ($navmap->{LAST_CHECK}) { + $r->print(''); + } else { + $r->print(''); + } + $r->print('
Key:    '. + ' New discussion since '. + strftime("%A, %b %e at %I:%M %P", localtime($navmap->{LAST_CHECK})). + '  '. + ' New message (click to open)

'. + '

  '. + ' Discussions'. + '   New message (click to open)'. + '
'); -# ------------------------------------------------------------------ Build page + my $condition = 0; + if ($ENV{'form.condition'}) { + $condition = 1; + } - my $currenturl=$ENV{'form.postdata'}; + # Determine where the "here" marker is and where the screen jumps to. + my $SYMB = 1; my $URL = 2; my $NOTHING = 3; # symbolic constants + my $hereType; # the type of marker, $SYMB, $URL, or $NOTHING + my $here; # the actual URL or SYMB for the here marker + my $jumpType; # The type of the thing we have a jump for, $SYMB or $URL + my $jump; # the SYMB/URL of the resource we need to jump to + + if ( $ENV{'form.alreadyHere'} ) { # we came from a user's manipulation of the nav page + # If this is a click on a folder or something, we want to preserve the "here" + # from the querystring, and get the new "jump" marker + $hereType = $ENV{'form.hereType'}; + $here = $ENV{'form.here'}; + $jumpType = $ENV{'form.jumpType'} || $NOTHING; + $jump = $ENV{'form.jump'}; + } else { # the user is visiting the nav map from the remote + # We're coming from the remote. We have either a url, a symb, or nothing, + # and we need to figure out what. + # Preference: Symb + + if ($ENV{'form.symb'}) { + $hereType = $jumpType = $SYMB; + $here = $jump = $ENV{'form.symb'}; + } elsif ($ENV{'form.postdata'}) { + # couldn't find a symb, is there a URL? + my $currenturl = $ENV{'form.postdata'}; $currenturl=~s/^http\:\/\///; $currenturl=~s/^[^\/]+//; -# ---------------------------------------------------------------- Send headers - - my $date=localtime; - my $now=time; -# ----------------------------------------- Get email status and discussiontime - - my %emailstatus=&Apache::lonnet::dump('email_status'); - my $logouttime=$emailstatus{'logout'}; - my $courseleave=$emailstatus{'logout_'.$ENV{'request.course.id'}}; - my $lastcheck=($courseleave>$logouttime?$courseleave:$logouttime); - - my %discussiontimes=&Apache::lonnet::dump('discussiontimes', - $cdom,$cnum); - - my %feedback=(); - my %error=(); - foreach my $msgid (split(/\&/,&Apache::lonnet::reply('keys:'. - $ENV{'user.domain'}.':'. - $ENV{'user.name'}.':nohist_email', - $ENV{'user.home'}))) { - $msgid=&Apache::lonnet::unescape($msgid); - my $plain=&Apache::lonnet::unescape(&Apache::lonnet::unescape($msgid)); - if ($plain=~/(Error|Feedback) \[([^\]]+)\]/) { - my ($what,$url)=($1,$2); - my %status= - &Apache::lonnet::get('email_status',[$msgid]); - if ($status{$msgid}=~/^error\:/) { - $status{$msgid}=''; - } - - if (($status{$msgid} eq 'new') || - (!$status{$msgid})) { - if ($what eq 'Error') { - $error{$url}.=','.$msgid; - } else { - $feedback{$url}.=','.$msgid; - } - } - } - } -# ----------------------------------------------------------- Start Page Output - my $bodytagadd=''; - $r->print( - 'Navigate Course Map'); - if (($currenturl=~/^\/res/) && - ($currenturl!~/^\/res\/adm/)) { - $bodytagadd='onLoad="window.location.hash='."'curloc'".'"'; - } - $r->print(&Apache::loncommon::bodytag('Navigate Course Map','', - $bodytagadd)); - $r->print(''); - my $desc=$ENV{'course.'.$ENV{'request.course.id'}.'.description'}; - if (defined($desc)) { $r->print("

$desc

\n"); } - $r->print("

$date

\n"); - $r->rflush(); - $r->print(' New discussion since '. - localtime($lastcheck). - '
New message (click to open)

'); - if (($currenturl=~/^\/res/) && - ($currenturl!~/^\/res\/adm/)) { - $r->print('Current Location

'); - } - - # Handle a network error - - if ($networkFailedFlag) - { - $r->print('

LON-CAPA network failure.

'."\n"); - $r->print("

LON-CAPA's network is having difficulties, some problem" . - " information, such as due dates, will not be available."); - } -# ----------------------------------------------------- The little content list - for ($i=0;$i<=$#rows;$i++) { - if ($rows[$i]) { - my @colcont=split(/\&/,$rows[$i]); - my $avespan=$lcm/($#colcont+1); - for ($j=0;$j<=$#colcont;$j++) { - my $rid=$colcont[$j]; - if ($rid=~/^h(.+)/) { - $rid=$1; - $r->print('   '.$hash{'title_'.$rid}. - '
'); - } - } - } - } -# ----------------------------------------------------------------- Start table - $r->print('


'); - for ($i=0;$i<=$#rows;$i++) { - if ($rows[$i]) { - $r->print("\n"); - my @colcont=split(/\&/,$rows[$i]); - my $avespan=$lcm/($#colcont+1); - - # for each item I wish to print on this row... - for ($j=0;$j<=$#colcont;$j++) { - my $indent;my $indentstr; - my $linkid; - my $rid=$colcont[$j]; - $rid=~/(\d+)\.(\d+)$/; - my $src= - &Apache::lonnet::declutter($hash{'src_'.$1.'.'.$2}); - my $symb= - &Apache::lonnet::declutter($hash{'map_id_'.$1}).'___'.$2.'___'.$src; - my $add=''; - my $hwk=''; - my $hwke=''; - if ($rid=~/^l(\d+\.\d+),(.+)/) { $linkid=$1; $rid=$2; } - if ($rid=~/^i(\d+),(.+)/) { $indent=$1; $rid=$2; } - if ($rid=~/^h(.+)/) { - $rid=$1; - $add=''; - if (($ENV{'user.adv'}) && - ($parmhash{$symb.'.0.parameter_randompick'})) { - $adde=' (randomly select '. - $parmhash{$symb.'.0.parameter_randompick'}. - ')'; - } - } - if ($rid=~/^j(.+)/) { $rid=$1; } - if ($rid=~/^p(\d)(\d)\"([\w\: \(\)\/\,]*)\"(.+)/) { - # sub astatus describes what code/tcode mean - my $code=$1; - my $tcode=$2; - my $ctext=$3; - $rid=$4; - - # will open later - if ($tcode eq '1') { - $add=''; - } - } - $hwk=''; - $hwke=''; - if ($code eq '1') { - $hwke=' ('.$ctext.')'; - } - if ($code eq '2' || $code eq '4') { - $hwk=''; - $hwke=' ('.$ctext.')'; - } - if ($code eq '3') { - $hwk=''; - $hwke=' ('.$ctext.')'; - } - if ($networkFailedFlag) - { - $hwke=' (status unavailable)'; - } - } - if ($rid && $hash{'src_'.$rid} eq $currenturl) { - $add=$add.''. - '> '; - $adde= - ' <'.$adde; - } - if ($discussiontimes{$symb}>$lastcheck) { - $adde= - ''. - $adde; - } - if ($error{$src}) { - foreach (split(/\,/,$error{$src})) { - if ($_) { - $adde= - ' ' - .$adde; - } - } - } - if ($feedback{$src}) { - foreach (split(/\,/,$feedback{$src})) { - if ($_) { - $adde= - ' ' - .$adde; - } - } - } - if ($indent) { - my $is="  "; - for(my $i=-1;$i<$indent;$i++) { $indentstr.=$is; } - } - if (!$linkid) { $linkid=$rid; } - if ($hash{'randomout_'.$rid}) { - $adde=' (hidden)'.$adde; - } - $r->print($add.$indentstr); - if ($rid) { - $r->print(''. - $hwk.$hash{'title_'.$rid}.$hwke.''); - } - $r->print($adde); - } - $r->print(''); - } - } - $r->print("\n
'; - my $adde=''; - $adde=''; - } - - # solved/correct - if ($code eq '3') { - $add=''; - } elsif ($code eq '4') { # partially correct - $add=''; - } else { - # not attempted - - # we end up here on network failure, so pick a neutral - # color if the network failed instead of bright red. - if ( $networkFailedFlag ) - { - $add = ''; - } - else - { - $add=''; - } - - if ($tcode eq '2') { # open, not past due - $add=''; - } - - if ($tcode eq '4') { # due in next 24 hours - $add=''; - $adde='
"); - $r->print(''); -# -------------------------------------------------------------------- End page - } -# ------------------------------------------------------------- End render page - } -# ------------------------------------------------------------------ Untie hash - unless (untie(%hash)) { - &Apache::lonnet::logthis("WARNING: ". - "Could not untie coursemap $fn (browse)."); - } - unless (untie(%parmhash)) { - &Apache::lonnet::logthis("WARNING: ". - "Could not untie parmhash (browse)."); - } - return OK; -} - -sub new_handle { - my $r = shift; - - # Handle header-only request - if ($r->header_only) { - if ($ENV{'browser.mathml'}) { - $r->content_type('text/xml'); + $hereType = $jumpType = $URL; + $here = $jump = $currenturl; } else { - $r->content_type('text/html'); + # Nothing + $hereType = $jumpType = $NOTHING; } - $r->send_http_header; - return OK; } - # Send header, don't cache this page - if ($ENV{'browser.mathml'}) { - $r->content_type('text/xml'); + + # alreadyHere allows us to only open the maps necessary to view + # the current location once, while at the same time remembering + # the current location. Without that check, the user would never + # be able to close those maps; the user would close it, and the + # currenturl scan would re-open it. + my $queryAdd = "&alreadyHere=1"; + + if ($condition) { + $r->print("Close All Folders"); } else { - $r->content_type('text/html'); + $r->print("Open All Folders"); } - &Apache::loncommon::no_cache($r); - $r->send_http_header; - # Initialize the nav map - my $navmap = Apache::lonnavmaps::navmap->new( - $ENV{"request.course.fn"}.".db", - $ENV{"request.course.fn"}."_parms.db", 1); - - - if (!defined($navmap)) { - my $requrl = $r->uri; - $ENV{'user.error.msg'} = "$requrl:bre:0:0:Course not initialized"; - return HTTP_NOT_ACCEPTABLE; - } - - # Header - $r->print(&Apache::loncommon::bodytag('Navigate Course Map','', - '')); - $r->print(''); - my $desc=$ENV{'course.'.$ENV{'request.course.id'}.'.description'}; - if (defined($desc)) { $r->print("

$desc

\n"); } - my $date=localtime; - $r->print("

$date

\n"); + $r->print('
 '); $r->rflush(); - if ($navmap->{LAST_CHECK}) { - $r->print(' New discussion since '. - strftime("%A, %b %e at %I:%M %P", localtime($navmap->{LAST_CHECK})). - '
New message (click to open)

'); - } else { - $r->print(' Discussions'. - '
New message (click to open)

'); - } - #if (($currenturl=~/^\/res/) && - # ($currenturl!~/^\/res\/adm/)) { - # $r->print('Current Location

'); - #} # Check that it's defined if (!($navmap->courseMapDefined())) { @@ -865,14 +194,17 @@ sub new_handle { # is technically not proper, but should be harmless my $res = $navmap->firstResource(); + # These are some data tables, which make it easy to change some of + # of the specific visualization parameters if desired. + # Defines a status->color mapping, null string means don't color my %colormap = ( $res->NETWORK_FAILURE => '', $res->CORRECT => '', - $res->EXCUSED => '#BBBBFF', + $res->EXCUSED => '#3333FF', $res->PAST_DUE_ANSWER_LATER => '', $res->PAST_DUE_NO_ANSWER => '', - $res->ANSWER_OPEN => '#CCFFCC', + $res->ANSWER_OPEN => '#006600', $res->OPEN_LATER => '', $res->TRIES_LEFT => '', $res->INCORRECT => '', @@ -880,8 +212,10 @@ sub new_handle { $res->NOTHING_SET => '' ); # And a special case in the nav map; what to do when the assignment # is not yet done and due in less then 24 hours - my $hurryUpColor = "#FFCCCC"; + my $hurryUpColor = "#FF0000"; + # Keep these mappings in sync with lonquickgrades, which uses the colors + # instead of the icons. my %statusIconMap = ( $res->NETWORK_FAILURE => '', $res->NOTHING_SET => '', @@ -894,7 +228,7 @@ sub new_handle { $res->TRIES_LEFT => 'navmap.open.gif', $res->INCORRECT => 'navmap.wrong.gif', $res->OPEN => 'navmap.open.gif', - $res->ATTEMPTED => '' ); + $res->ATTEMPTED => 'navmap.open.gif' ); my %iconAltTags = ( 'navmap.correct.gif' => 'Correct', @@ -914,23 +248,88 @@ sub new_handle { } } - my $currenturl = $ENV{'form.postdata'}; - $currenturl=~s/^http\:\/\///; - $currenturl=~s/^[^\/]+//; - my $queryAdd = "postdata=" . &Apache::lonnet::escape($currenturl); - - $r->print('Show All Resources

'); + # Is this a new-style course? If so, we want to suppress showing the top-level + # maps in their own folders, in favor of "inlining" them. + my $topResource = $navmap->getById("0.0"); # Begin the HTML table # four cols: resource + indent, chat+feedback, icon, text string - $r->print('' ."\n"); + $r->print('
' ."\n"); - my $condition = 0; - if ($ENV{'form.condition'}) { - $condition = 1; - } + # This needs to be updated to use symbs from the remote, + # instead of uris. The changes to this and the main rendering + # loop should be obvious. + # Here's a simple example of the iterator. + # Preprocess the map: Look for current URL, force inlined maps to display + + my $mapIterator = $navmap->getIterator(undef, undef, undef, 1); + my $found = 0; + my $depth = 1; + my $currentJumpIndex = 0; # keeps track of when the current resource is found, + # so we can back up a few and put the anchor above the + # current resource + my $currentJumpDelta = 2; # change this to change how many resources are displayed + # before the current resource when using #current + $mapIterator->next(); # discard the first BEGIN_MAP + my $curRes = $mapIterator->next(); + my $counter = 0; + my $foundJump = ($jumpType == $NOTHING); # look for jump point if we have one + my $looped = 0; + + # We only need to do this if we need to open the maps to show the + # current position. This will change the counter so we can't count + # for the jump marker with this loop. + while ($depth > 0 && !$ENV{'form.alreadyHere'}) { + if ($curRes == $mapIterator->BEGIN_MAP()) { $depth++; } + if ($curRes == $mapIterator->END_MAP()) { $depth--; } + + if (ref($curRes) && !$ENV{'form.alreadyHere'} && + ($hereType == $SYMB && $curRes->symb() eq $here) || + (ref($curRes) && $hereType == $URL && $curRes->src() eq $here)) { + my $mapStack = $mapIterator->getStack(); + + # Ensure the parent maps are open + for my $map (@{$mapStack}) { + if ($condition) { + undef $filterHash{$map->map_pc()}; + } else { + $filterHash{$map->map_pc()} = 1; + } + } + $ENV{'form.alreadyHere'} = 1; + } + $looped = 1; + + $curRes = $mapIterator->next(); + } + + $mapIterator = $navmap->getIterator(undef, undef, \%filterHash, 0); + $depth = 1; + $mapIterator->next(); + $curRes = $mapIterator->next(); + + while ($depth > 0 && !$foundJump) { + if ($curRes == $mapIterator->BEGIN_MAP()) { $depth++; } + if ($curRes == $mapIterator->END_MAP()) { $depth--; } + if (ref($curRes)) { $counter++; } + + if (ref($curRes) && + (($jumpType == $SYMB && $curRes->symb() eq $jump) || + ($jumpType == $URL && $curRes->src() eq $jump))) { + # If this is the correct resource, be sure to + # show it by making sure the containing maps + # are open. + + # This is why we have to use the main iterator instead of the + # potentially faster DFS: The count has to be the same, so + # the order has to be the same, which DFS won't give us. + $currentJumpIndex = $counter; + $foundJump = 1; + } - my $mapIterator = $navmap->getIterator(undef, undef, \%filterHash, $condition); + $curRes = $mapIterator->next(); + } + undef $res; # so we don't accidentally use it later my $indentLevel = 0; my $indentString = "\"\""; @@ -938,12 +337,21 @@ sub new_handle { my $isNewBranch = 0; my $now = time(); my $in24Hours = $now + 24 * 60 * 60; - my $depth = 1; - + my $displayedHereMarker = 0; + my $displayedJumpMarker = 0; + # We know the first thing is a BEGIN_MAP (see "$self->{STARTED}" # code in iterator->next), so ignore the first one + $mapIterator = $navmap->getIterator(undef, undef, \%filterHash, + $condition); $mapIterator->next(); - my $curRes = $mapIterator->next(); + $curRes = $mapIterator->next(); + $depth = 1; + + my @backgroundColors = ("#FFFFFF", "#F6F6F6"); + my $rowNum = 0; + + $counter = 0; while ($depth > 0) { if ($curRes == $mapIterator->BEGIN_MAP() || @@ -957,20 +365,29 @@ sub new_handle { if ($curRes == $mapIterator->BEGIN_BRANCH()) { $isNewBranch = 1; } - if ($curRes == $mapIterator->BEGIN_MAP()) { - $depth++; - } - if ($curRes == $mapIterator->END_MAP()) { - $depth--; - } + if ($curRes == $mapIterator->BEGIN_MAP()) { $depth++; } + if ($curRes == $mapIterator->END_MAP()) { $depth--; } + + if (ref($curRes)) { $counter++; } - # Is this resource being blotted out? + # Is this resource being ignored because it is in a random-out + # map and it was not selected? if (ref($curRes) && !advancedUser() && $curRes->randomout()) { $curRes = $mapIterator->next(); - next; # and totally ignore this resource + next; # if yes, then just ignore this resource } - if (ref($curRes) && $curRes->src()) { + if (ref($curRes)) { + + my $deltalevel = $isNewBranch? 1 : 0; # reserves space for branch icon + + if ($indentLevel - $deltalevel < 0) { + # If this would be at a negative depth (top-level maps in + # new-style courses, we want to suppress their title display) + # then ignore it. + $curRes = $mapIterator->next(); + next; + } # Step one: Decide which parts to show my @parts = @{$curRes->parts()}; @@ -978,14 +395,15 @@ sub new_handle { my $condensed = 0; if ($curRes->is_problem()) { - # Is it multipart? + # Is it multipart? if ($multipart) { # If it's multipart, see if part 0 is "open" # if it is, display all parts, if it isn't, # just display first if (!$curRes->opendate("0")) { - @parts = ("0"); # just display the zero-th part + # no parts are open, display as one part + @parts = (); $condensed = 1; } else { # Otherwise, only display part 0 if we want to @@ -993,9 +411,6 @@ sub new_handle { if ($curRes->hasDiscussion() || $curRes->getFeedback()) { shift @parts; } else { - # If there's discussion or feedback, that counts - # as a difference, so display the parts. - # Now, we decide whether to condense the # parts due to similarity my $status = $curRes->status($parts[1]); @@ -1026,52 +441,63 @@ sub new_handle { if (($statusAllSame && defined($condenseStatuses{$status})) || ($dueAllSame && $status == $curRes->OPEN && $statusAllSame)|| ($openAllSame && $status == $curRes->OPEN_LATER && $statusAllSame) ){ - @parts = ($parts[1]); + @parts = (); $condensed = 1; } } } } - } else { - @parts[0] = "0"; # this is to get past foreach loop below - # you can consider a non-problem resource as a resource - # with only one part without loss + } + + # Is it a multipart problem with a single part, now in + # @parts with "0" filtered out? If so, 'forget' it's a multi-part + # problem and treat it like a single-part problem. + if ( scalar(@parts) == 0 ) { + $multipart = 0; } # Display one part, in event of network error. # If this is a single part, we can at least show the correct - # status, but if it's multipart, we're lost. + # status, but if it's multipart, we're lost, since we can't + # retreive the metadata to count the parts if ($curRes->{RESOURCE_ERROR}) { - @parts = ("0"); + @parts = (); } - # Step two: Show the parts - foreach my $part (@parts) { + # Step Two: Print the actual data. + + # For each part we intend to display... + foreach my $part ('', @parts) { + if ($part eq '0') { + next; + } - my $deltalevel = 0; # for inserting the branch icon my $nonLinkedText = ""; # unlinked stuff after title - # For each thing we're displaying... - my $stack = $mapIterator->getStack(); my $src = getLinkForResource($stack); + # Pass the correct symb on the querystring, so the + # remote will figure out where we are if we click a link my $srcHasQuestion = $src =~ /\?/; my $link = $src. ($srcHasQuestion?'&':'?') . 'symb='.&Apache::lonnet::escape($curRes->symb()). '"'; - my $title = $curRes->title(); + + my $title = $curRes->compTitle(); + if ($src=~/^\/uploaded\//) { + $nonLinkedText=$title; + $title=''; + } my $partLabel = ""; my $newBranchText = ""; # If this is a new branch, label it so - # (temporary, this should be an icon w/ alt text) if ($isNewBranch) { $newBranchText = ""; $isNewBranch = 0; - $deltalevel = 1; } # links to open and close the folders @@ -1080,7 +506,7 @@ sub new_handle { my $icon = "\"\""; if ($curRes->is_problem()) { - if ($part eq "0" || $condensed) { + if ($part eq "" || $condensed) { $icon = ''; } else { $icon = $indentString; @@ -1090,23 +516,33 @@ sub new_handle { # Display the correct icon, link to open or shut map if ($curRes->is_map()) { my $mapId = $curRes->map_pc(); - my $nowOpen = !defined($filterHash{$mapId}); + my $nowOpen = (!defined($filterHash{$mapId})); + if ($condition) {$nowOpen = !$nowOpen;} $icon = $nowOpen ? - "folder_closed.gif" : "folder_opened.gif"; + "navmap.folder.closed.gif" : "navmap.folder.open.gif"; $icon = "\"\""; $linkopen = ""; + $linkopen .= "&condition=$condition&$queryAdd" . + "&hereType=$hereType&here=" . + Apache::lonnet::escape($here) . "&jumpType=$SYMB&" . + "jump=" . Apache::lonnet::escape($curRes->symb()) ."\">"; $linkclose = ""; } my $colorizer = ""; + my $color; if ($curRes->is_problem()) { - my $status = $curRes->status($part); - my $color = $colormap{$status}; + $color = $colormap{$curRes->status}; + + if (dueInLessThen24Hours($curRes, $part) || + lastTry($curRes, $part)) { + $color = $hurryUpColor; + } + if ($color ne "") { $colorizer = "bgcolor=\"$color\""; } @@ -1116,8 +552,17 @@ sub new_handle { $nonLinkedText .= ' (hidden) '; } - # FIRST COL: The resource indentation, branch icon, and name - $r->print(" \n"); - my $discussionHTML = ""; my $feedbackHTML = ""; + # SECOND COL: Is there text, feedback, errors?? + my $discussionHTML = ""; my $feedbackHTML = ""; my $errorHTML = ""; - # SECOND COL: Is there text or feedback? if ($curRes->hasDiscussion()) { $discussionHTML = $linkopen . '' . @@ -1162,11 +621,24 @@ sub new_handle { } } - $r->print(""); + if ($curRes->getErrors()) { + my $errors = $curRes->getErrors(); + foreach (split(/,/, $errors)) { + if ($_) { + $errorHTML .= ' ' + . ''; + } + } + } + + $r->print(""); # Is this the first displayed part of a multi-part problem # that has not been condensed, so we should suppress these two - # columns? + # columns so we don't display useless status info about part + # "0"? my $firstDisplayed = !$condensed && $multipart && $part eq "0"; # THIRD COL: Problem status icon @@ -1175,36 +647,48 @@ sub new_handle { my $icon = $statusIconMap{$curRes->status($part)}; my $alt = $iconAltTags{$icon}; if ($icon) { - $r->print("\n"); + $r->print("\n"); } else { - $r->print("\n"); + $r->print("\n"); } } else { # not problem, no icon - $r->print("\n"); + $r->print("\n"); } # FOURTH COL: Text description - $r->print("\n"); + $r->print(" \n"); + + if (!($counter % 20)) { $r->rflush(); } + if ($counter == 2) { $r->rflush(); } } } $curRes = $mapIterator->next(); } - $r->print("
\n"); + $rowNum++; + my $backgroundColor = $backgroundColors[$rowNum % scalar(@backgroundColors)]; + + # FIRST COL: The resource indentation, branch icon, name, and anchor + $r->print("
\n"); + + # Print the anchor if necessary + if ($counter == $currentJumpIndex - $currentJumpDelta ) { + $r->print(''); + $displayedJumpMarker = 1; + } # print indentation for (my $i = 0; $i < $indentLevel - $deltalevel; $i++) { @@ -1126,24 +571,38 @@ sub new_handle { $r->print(" ${newBranchText}${linkopen}$icon${linkclose}\n"); - if ($curRes->is_problem() && $part ne "0" && !$condensed) { + my $curMarkerBegin = ""; + my $curMarkerEnd = ""; + + # Is this the current resource? + if (!$displayedHereMarker && + (($hereType == $SYMB && $curRes->symb eq $here) || + ($hereType == $URL && $curRes->src eq $here))) { + $curMarkerBegin = '> '; + $curMarkerEnd = ' <'; + $displayedHereMarker = 1; + } + + if ($curRes->is_problem() && $part ne "" && !$condensed) { $partLabel = " (Part $part)"; $title = ""; } - if ($multipart && $condensed) { + if ($condensed && $curRes->countParts() > 1) { $nonLinkedText .= ' (' . $curRes->countParts() . ' parts)'; } - $r->print(" $title$partLabel $nonLinkedText"); + $r->print(" $curMarkerBegin$title$partLabel $curMarkerEnd $nonLinkedText"); - if ($curRes->{RESOURCE_ERROR}) { - $r->print(&Apache::loncommon::help_open_topic ("Navmap_Host_Down", - 'Host down')); - } + #if ($curRes->{RESOURCE_ERROR}) { + # $r->print(&Apache::loncommon::help_open_topic ("Navmap_Host_Down", + # 'Host down')); + # } + + $r->print("$discussionHTML$feedbackHTML$discussionHTML$feedbackHTML$errorHTML $linkopen\"$alt\"$linkclose$linkopen\"$alt\"$linkclose  \n"); + $r->print("\n"); if ($curRes->kind() eq "res" && $curRes->is_problem() && !$firstDisplayed) { + $r->print ("") if ($color); $r->print (getDescription($curRes, $part)); + $r->print ("") if ($color); } if ($curRes->is_map() && advancedUser() && $curRes->randompick()) { $r->print('(randomly select ' . $curRes->randompick() .')'); } - $r->print("
"); + $r->print(""); + + # Print out the part that jumps to #curloc if it exists + if ($displayedJumpMarker) { + $r->print(''); + } $navmap->untieHashes(); + $r->print(""); + return OK; } @@ -1273,7 +757,7 @@ sub getDescription { return "Open " . timeToHumanString($res->opendate($part)); } if ($status == $res->OPEN) { - if ($res->duedate()) { + if ($res->duedate($part)) { return "Due " . timeToHumanString($res->duedate($part)); } else { return "Open, no due date"; @@ -1295,9 +779,15 @@ sub getDescription { return "Not yet graded."; } if ($status == $res->TRIES_LEFT) { - my $tries = $res->tries(); - my $maxtries = $res->maxtries(); - my $triesString = "($tries of $maxtries tries used)"; + my $tries = $res->tries($part); + my $maxtries = $res->maxtries($part); + my $triesString = ""; + if ($tries && $maxtries) { + $triesString = "($tries of $maxtries tries used)"; + if ($maxtries > 1 && $maxtries - $tries == 1) { + $triesString = "$triesString"; + } + } if ($res->duedate()) { return "Due " . timeToHumanString($res->duedate($part)) . " $triesString"; @@ -1307,6 +797,34 @@ sub getDescription { } } +# Convenience function, so others can use it: Is the problem due in less then +# 24 hours, and still can be done? + +sub dueInLessThen24Hours { + my $res = shift; + my $part = shift; + my $status = $res->status($part); + + return ($status == $res->OPEN() || $status == $res->ATTEMPTED() || + $status == $res->TRIES_LEFT()) && + $res->duedate() && $res->duedate() < time()+(24*60*60) && + $res->duedate() > time(); +} + +# Convenience function, so others can use it: Is there only one try remaining for the +# part, with more then one try to begin with, not due yet and still can be done? +sub lastTry { + my $res = shift; + my $part = shift; + + my $tries = $res->tries($part); + my $maxtries = $res->maxtries($part); + return $tries && $maxtries && $maxtries > 1 && + $maxtries - $tries == 1 && $res->duedate() && + $res->duedate() > time(); +} + +# This puts a human-readable name on the ENV variable. sub advancedUser { return $ENV{'user.adv'}; } @@ -1352,17 +870,18 @@ sub timeToHumanString { $delta = -$delta; } - # Is it in the future? if ( $delta > 0 ) { - # Is it less then a minute away? + my $tense = $inPast ? " ago" : ""; my $prefix = $inPast ? "" : "in "; + + # Less then a minute if ( $delta < $minute ) { if ($delta == 1) { return "${prefix}1 second$tense"; } return "$prefix$delta seconds$tense"; } - # Is it less then an hour away? + # Less then an hour if ( $delta < $hour ) { # If so, use minutes my $minutes = floor($delta / 60); @@ -1392,7 +911,7 @@ sub timeToHumanString { # Less then 5 days away, display day of the week and # HH:MM if ( $delta < $day * 5 ) { - my $timeStr = strftime("%A at %I:%M %P", localtime($time)); + my $timeStr = strftime("%A, %b %e at %I:%M %P", localtime($time)); $timeStr =~ s/12:00 am/midnight/; $timeStr =~ s/12:00 pm/noon/; return ($inPast ? "last " : "next ") . @@ -1456,7 +975,7 @@ sub new { $self->{GENERATE_COURSE_USER_OPT} = shift; $self->{GENERATE_EMAIL_DISCUSS_STATUS} = shift; - # Resource cache stores navmapresource's as we reference them. We generate + # Resource cache stores navmap resources as we reference them. We generate # them on-demand so we don't pay for creating resources unless we use them. $self->{RESOURCE_CACHE} = {}; @@ -1470,7 +989,6 @@ sub new { &GDBM_READER(), 0640))) { return undef; } - $self->{NAV_HASH} = \%navmaphash; my %parmhash; if (!(tie(%parmhash, 'GDBM_File', $self->{PARM_HASH_FILE}, @@ -1479,8 +997,18 @@ sub new { untie $self->{PARM_HASH}; return undef; } - $self->{PARM_HASH} = \%parmhash; + $self->{HASH_TIED} = 1; + $self->{NAV_HASH} = \%navmaphash; + $self->{PARM_HASH} = \%parmhash; + + bless($self); + + return $self; +} + +sub init { + my $self = shift; # If the course opt hash and the user opt hash should be generated, # generate them @@ -1494,7 +1022,7 @@ sub new { my $userprefix=$uname.'_'.$udom.'_'; - my %courserdatas; my %useropt; my %courseopt; + my %courserdatas; my %useropt; my %courseopt; my %userrdatas; unless ($uhome eq 'no_host') { # ------------------------------------------------- Get coursedata (if present) unless ((time-$courserdatas{$cid.'.last_cache'})<240) { @@ -1545,7 +1073,7 @@ sub new { my %emailstatus = &Apache::lonnet::dump('email_status'); my $logoutTime = $emailstatus{'logout'}; my $courseLeaveTime = $emailstatus{'logout_'.$ENV{'request.course.id'}}; - $self->{LAST_CHECK} = ($courseLeaveTime > $logoutTime ? + $self->{LAST_CHECK} = ($courseLeaveTime < $logoutTime ? $courseLeaveTime : $logoutTime); my %discussiontime = &Apache::lonnet::dump('discussiontimes', $cdom, $cnum); @@ -1584,10 +1112,15 @@ sub new { $self->{EMAIL_STATUS} = \%emailstatus; } - - bless($self); - - return $self; + + $self->{PARM_CACHE} = {}; +} + +# Internal function: Takes a key to look up in the nav hash and implements internal +# memory caching of that key. +sub navhash { + my $self = shift; my $key = shift; + return $self->{NAV_HASH}->{$key}; } # Checks to see if coursemap is defined, matching test in old lonnavmaps @@ -1595,8 +1128,8 @@ sub courseMapDefined { my $self = shift; my $uri = &Apache::lonnet::clutter($ENV{'request.course.uri'}); - my $firstres = $self->{NAV_HASH}->{"map_start_$uri"}; - my $lastres = $self->{NAV_HASH}->{"map_finish_$uri"}; + my $firstres = $self->navhash("map_start_$uri"); + my $lastres = $self->navhash("map_finish_$uri"); return $firstres && $lastres; } @@ -1621,18 +1154,19 @@ sub DESTROY { $self->untieHashes(); } -# Private function: Does the given resource (as a symb string) have +# Private method: Does the given resource (as a symb string) have # current discussion? Returns 0 if chat/mail data not extracted. sub hasDiscussion { my $self = shift; my $symb = shift; if (!defined($self->{DISCUSSION_TIME})) { return 0; } + #return defined($self->{DISCUSSION_TIME}->{$symb}); return $self->{DISCUSSION_TIME}->{$symb} > $self->{LAST_CHECK}; } -# Private function: Does the given resource (as a symb string) have +# Private method: Does the given resource (as a symb string) have # current feedback? Returns the string in the feedback hash, which # will be false if it does not exist. sub getFeedback { @@ -1644,6 +1178,15 @@ sub getFeedback { return $self->{FEEDBACK}->{$symb}; } +# Private method: Get the errors for that resource (by source). +sub getErrors { + my $self = shift; + my $src = shift; + + if (!defined($self->{ERROR_MSG})) { return ""; } + return $self->{ERROR_MSG}->{$src}; +} + =pod =item * B(id): Based on the ID of the resource (1.1, 3.2, etc.), get a resource object for that resource. This method, or other methods that use it (as in the resource object) is the only proper way to obtain a resource object. @@ -1676,8 +1219,8 @@ sub getById { sub firstResource { my $self = shift; - my $firstResource = $self->{NAV_HASH}->{'map_start_' . - &Apache::lonnet::clutter($ENV{'request.course.uri'})}; + my $firstResource = $self->navhash('map_start_' . + &Apache::lonnet::clutter($ENV{'request.course.uri'})); return $self->getById($firstResource); } @@ -1689,22 +1232,31 @@ sub firstResource { sub finishResource { my $self = shift; - my $firstResource = $self->{NAV_HASH}->{'map_finish_' . - &Apache::lonnet::clutter($ENV{'request.course.uri'})}; + my $firstResource = $self->navhash('map_finish_' . + &Apache::lonnet::clutter($ENV{'request.course.uri'})); return $self->getById($firstResource); } -# -------------------------------------------- Figure out a cascading parameter -# -# For this function to work -# -# * parmhash needs to be tied -# * courseopt and useropt need to be initialized for this user and course -# - +# Parmval reads the parm hash and cascades the lookups. parmval_real does +# the actual lookup; parmval caches the results. sub parmval { my $self = shift; my ($what,$symb)=@_; + my $hashkey = $what."|||".$symb; + + if (defined($self->{PARM_CACHE}->{$hashkey})) { + return $self->{PARM_CACHE}->{$hashkey}; + } + + my $result = $self->parmval_real($what, $symb); + $self->{PARM_CACHE}->{$hashkey} = $result; + return $result; +} + +sub parmval_real { + my $self = shift; + my ($what,$symb) = @_; + my $cid=$ENV{'request.course.id'}; my $csec=$ENV{'request.course.sec'}; my $uname=$ENV{'user.name'}; @@ -1788,10 +1340,6 @@ sub parmval { package Apache::lonnavmaps::iterator; -# This package must precede "navmap" because "navmap" uses it. In -# order to keep the documentation order straight, the iterator is documented -# after the navmap object. - =pod =back @@ -1812,9 +1360,9 @@ getIterator behaves as follows: =over 4 -=item B(firstResource, finishResource, filterHash, condition): All parameters are optional. firstResource is a resource reference corresponding to where the iterator should start. It defaults to navmap->firstResource() for the corresponding nav map. finishResource corresponds to where you want the iterator to end, defaulting to navmap->finishResource(). filterHash is a hash used as a set containing strings representing the resource IDs, defaulting to empty. Condition is a 1 or 0 that sets what to do with the filter hash: If a 0, then only resource that exist IN the filterHash will be recursed on. If it is a 1, only resources NOT in the filterHash will be recursed on. Defaults to 0, which is to say, do not recurse unless explicitly asked to. +=item * B(firstResource, finishResource, filterHash, condition, forceTop): All parameters are optional. firstResource is a resource reference corresponding to where the iterator should start. It defaults to navmap->firstResource() for the corresponding nav map. finishResource corresponds to where you want the iterator to end, defaulting to navmap->finishResource(). filterHash is a hash used as a set containing strings representing the resource IDs, defaulting to empty. Condition is a 1 or 0 that sets what to do with the filter hash: If a 0, then only resource that exist IN the filterHash will be recursed on. If it is a 1, only resources NOT in the filterHash will be recursed on. Defaults to 0. forceTop is a boolean value. If it is false (default), the iterator will only return the first level of map that is not just a single, 'redirecting' map. If true, the iterator will return all information, starting with the top-level map, regardless of content. -Thus, by default, all resources will be shown. Change the condition to a 1 without changing the hash, and only the top level of the map will be shown. Changing the condition to 1 and including some values in the hash will allow you to selectively examine parts of the navmap, while leaving it on 0 and adding things to the hash will allow you to selectively ignore parts of the nav map. See the handler code for examples: By default, the condition is 0 and all folders are closed unless explicitly opened. Clicking "Show All Resources" will use a condition of 1 and an empty filterHash, resulting in all resources being shown. +Thus, by default, only top-level resources will be shown. Change the condition to a 1 without changing the hash, and all resources will be shown. Changing the condition to 1 and including some values in the hash will allow you to selectively suppress parts of the navmap, while leaving it on 0 and adding things to the hash will allow you to selectively add parts of the nav map. See the handler code for examples. The iterator will return either a reference to a resource object, or a token representing something in the map, such as the beginning of a new branch. The possible tokens are: @@ -1832,6 +1380,8 @@ The iterator will return either a refere The tokens are retreivable via methods on the iterator object, i.e., $iterator->END_MAP. +Maps can contain empty resources. The iterator will automatically skip over such resources, but will still treat the structure correctly. Thus, a complicated map with several branches, but consisting entirely of empty resources except for one beginning or ending resource, will cause a lot of BRANCH_STARTs and BRANCH_ENDs, but only one resource will be returned. + =back =cut @@ -1842,9 +1392,18 @@ sub BEGIN_MAP { return 1; } # beginin sub END_MAP { return 2; } # end of the map sub BEGIN_BRANCH { return 3; } # beginning of a branch sub END_BRANCH { return 4; } # end of a branch +sub FORWARD { return 1; } # go forward +sub BACKWARD { return 2; } + +sub min { + (my $a, my $b) = @_; + if ($a < $b) { return $a; } else { return $b; } +} -# Params: nav map, start resource, end resource, filter, condition, -# already seen hash ref +# In the CVS repository, documentation of this algorithm is included +# in /doc/lonnavdocs, as a PDF and .tex source. Markers like **1** +# will reference the same location in the text as the part of the +# algorithm is running through. sub new { # magic invocation to create a class instance @@ -1873,7 +1432,341 @@ sub new { if (!defined($self->{ALREADY_SEEN})) { $self->{ALREADY_SEEN} = {} }; $self->{CONDITION} = shift; - # Flag: Have we started yet? If not, the first action is to return BEGIN_MAP. + # Do we want to automatically follow "redirection" maps? + $self->{FORCE_TOP} = shift; + + # Now, we need to pre-process the map, by walking forward and backward + # over the parts of the map we're going to look at. + + # The processing steps are exactly the same, except for a few small + # changes, so I bundle those up in the following list of two elements: + # (direction_to_iterate, VAL_name, next_resource_method_to_call, + # first_resource). + # This prevents writing nearly-identical code twice. + my @iterations = ( [FORWARD(), 'TOP_DOWN_VAL', 'getNext', + 'FIRST_RESOURCE'], + [BACKWARD(), 'BOT_UP_VAL', 'getPrevious', + 'FINISH_RESOURCE'] ); + + my $maxDepth = 0; # tracks max depth + + # If there is only one resource in this map, and it's a map, we + # want to remember that, so the user can ask for the first map + # that isn't just a redirector. + my $resource; my $resourceCount = 0; + + # **1** + + foreach my $pass (@iterations) { + my $direction = $pass->[0]; + my $valName = $pass->[1]; + my $nextResourceMethod = $pass->[2]; + my $firstResourceName = $pass->[3]; + + my $iterator = Apache::lonnavmaps::DFSiterator->new($self->{NAV_MAP}, + $self->{FIRST_RESOURCE}, + $self->{FINISH_RESOURCE}, + {}, undef, 0, $direction); + + # prime the recursion + $self->{$firstResourceName}->{DATA}->{$valName} = 0; + my $depth = 0; + $iterator->next(); + my $curRes = $iterator->next(); + while ($depth > -1) { + if ($curRes == $iterator->BEGIN_MAP()) { $depth++; } + if ($curRes == $iterator->END_MAP()) { $depth--; } + + if (ref($curRes)) { + # If there's only one resource, this will save it + # we have to filter empty resources from consideration here, + # or even "empty", redirecting maps have two (start & finish) + # or three (start, finish, plus redirector) + if($direction == FORWARD && $curRes->src()) { + $resource = $curRes; $resourceCount++; + } + my $resultingVal = $curRes->{DATA}->{$valName}; + my $nextResources = $curRes->$nextResourceMethod(); + my $nextCount = scalar(@{$nextResources}); + + if ($nextCount == 1) { # **3** + my $current = $nextResources->[0]->{DATA}->{$valName} || 999999999; + $nextResources->[0]->{DATA}->{$valName} = min($resultingVal, $current); + } + + if ($nextCount > 1) { # **4** + foreach my $res (@{$nextResources}) { + my $current = $res->{DATA}->{$valName} || 999999999; + $res->{DATA}->{$valName} = min($current, $resultingVal + 1); + } + } + } + + # Assign the final val (**2**) + if (ref($curRes) && $direction == BACKWARD()) { + my $finalDepth = min($curRes->{DATA}->{TOP_DOWN_VAL}, + $curRes->{DATA}->{BOT_UP_VAL}); + + $curRes->{DATA}->{DISPLAY_DEPTH} = $finalDepth; + if ($finalDepth > $maxDepth) {$maxDepth = $finalDepth;} + } + $curRes = $iterator->next(); + } + } + + # Check: Was this only one resource, a map? + if ($resourceCount == 1 && $resource->is_map() && !$self->{FORCE_TOP}) { + my $firstResource = $resource->map_start(); + my $finishResource = $resource->map_finish(); + return + Apache::lonnavmaps::iterator->new($self->{NAV_MAP}, $firstResource, + $finishResource, $self->{FILTER}, + $self->{ALREADY_SEEN}, + $self->{CONDITION}, 0); + + } + + # Set up some bookkeeping information. + $self->{CURRENT_DEPTH} = 0; + $self->{MAX_DEPTH} = $maxDepth; + $self->{STACK} = []; + $self->{RECURSIVE_ITERATOR_FLAG} = 0; + + for (my $i = 0; $i <= $self->{MAX_DEPTH}; $i++) { + push @{$self->{STACK}}, []; + } + + # Prime the recursion w/ the first resource **5** + push @{$self->{STACK}->[0]}, $self->{FIRST_RESOURCE}; + $self->{ALREADY_SEEN}->{$self->{FIRST_RESOURCE}->{ID}} = 1; + + bless ($self); + + return $self; +} + +sub next { + my $self = shift; + + if ($self->{RECURSIVE_ITERATOR_FLAG}) { + # grab the next from the recursive iterator + my $next = $self->{RECURSIVE_ITERATOR}->next(); + + # is it a begin or end map? If so, update the depth + if ($next == BEGIN_MAP() ) { $self->{RECURSIVE_DEPTH}++; } + if ($next == END_MAP() ) { $self->{RECURSIVE_DEPTH}--; } + + # Are we back at depth 0? If so, stop recursing + if ($self->{RECURSIVE_DEPTH} == 0) { + $self->{RECURSIVE_ITERATOR_FLAG} = 0; + } + + return $next; + } + + if (defined($self->{FORCE_NEXT})) { + my $tmp = $self->{FORCE_NEXT}; + $self->{FORCE_NEXT} = undef; + return $tmp; + } + + # Have we not yet begun? If not, return BEGIN_MAP and + # remember we've started. + if ( !$self->{STARTED} ) { + $self->{STARTED} = 1; + return $self->BEGIN_MAP(); + } + + # Here's the guts of the iterator. + + # Find the next resource, if any. + my $found = 0; + my $i = $self->{MAX_DEPTH}; + my $newDepth; + my $here; + while ( $i >= 0 && !$found ) { + if ( scalar(@{$self->{STACK}->[$i]}) > 0 ) { # **6** + $here = pop @{$self->{STACK}->[$i]}; # **7** + $found = 1; + $newDepth = $i; + } + $i--; + } + + # If we still didn't find anything, we're done. + if ( !$found ) { + # We need to get back down to the correct branch depth + if ( $self->{CURRENT_DEPTH} > 0 ) { + $self->{CURRENT_DEPTH}--; + return END_BRANCH(); + } else { + return END_MAP(); + } + } + + # If this is not a resource, it must be an END_BRANCH marker we want + # to return directly. + if (!ref($here)) { # **8** + if ($here == END_BRANCH()) { # paranoia, in case of later extension + $self->{CURRENT_DEPTH}--; + return $here; + } + } + + # Otherwise, it is a resource and it's safe to store in $self->{HERE} + $self->{HERE} = $here; + + # Get to the right level + if ( $self->{CURRENT_DEPTH} > $newDepth ) { + push @{$self->{STACK}->[$newDepth]}, $here; + $self->{CURRENT_DEPTH}--; + return END_BRANCH(); + } + if ( $self->{CURRENT_DEPTH} < $newDepth) { + push @{$self->{STACK}->[$newDepth]}, $here; + $self->{CURRENT_DEPTH}++; + return BEGIN_BRANCH(); + } + + # If we made it here, we have the next resource, and we're at the + # right branch level. So let's examine the resource for where + # we can get to from here. + + # So we need to look at all the resources we can get to from here, + # categorize them if we haven't seen them, remember if we have a new + my $nextUnfiltered = $here->getNext(); + my $maxDepthAdded = -1; + + for (@$nextUnfiltered) { + if (!defined($self->{ALREADY_SEEN}->{$_->{ID}})) { + my $depth = $_->{DATA}->{DISPLAY_DEPTH}; + push @{$self->{STACK}->[$depth]}, $_; + $self->{ALREADY_SEEN}->{$_->{ID}} = 1; + if ($maxDepthAdded < $depth) { $maxDepthAdded = $depth; } + } + } + + # Is this the end of a branch? If so, all of the resources examined above + # led to lower levels then the one we are currently at, so we push a END_BRANCH + # marker onto the stack so we don't forget. + # Example: For the usual A(BC)(DE)F case, when the iterator goes down the + # BC branch and gets to C, it will see F as the only next resource, but it's + # one level lower. Thus, this is the end of the branch, since there are no + # more resources added to this level or above. + # We don't do this if the examined resource is the finish resource, + # because the condition given above is true, but the "END_MAP" will + # take care of things and we should already be at depth 0. + my $isEndOfBranch = $maxDepthAdded < $self->{CURRENT_DEPTH}; + if ($isEndOfBranch && $here != $self->{FINISH_RESOURCE}) { # **9** + push @{$self->{STACK}->[$self->{CURRENT_DEPTH}]}, END_BRANCH(); + } + + # That ends the main iterator logic. Now, do we want to recurse + # down this map (if this resource is a map)? + if ($self->{HERE}->is_map() && + (defined($self->{FILTER}->{$self->{HERE}->map_pc()}) xor $self->{CONDITION})) { + $self->{RECURSIVE_ITERATOR_FLAG} = 1; + my $firstResource = $self->{HERE}->map_start(); + my $finishResource = $self->{HERE}->map_finish(); + + $self->{RECURSIVE_ITERATOR} = + Apache::lonnavmaps::iterator->new($self->{NAV_MAP}, $firstResource, + $finishResource, $self->{FILTER}, + $self->{ALREADY_SEEN}, $self->{CONDITION}); + } + + # If this is a blank resource, don't actually return it. + # Should you ever find you need it, make sure to add an option to the code + # that you can use; other things depend on this behavior. + if (!$self->{HERE}->src() || !$self->{HERE}->browsePriv()) { + return $self->next(); + } + + return $self->{HERE}; + +} + +=pod + +The other method available on the iterator is B, which returns an array populated with the current 'stack' of maps, as references to the resource objects. Example: This is useful when making the navigation map, as we need to check whether we are under a page map to see if we need to link directly to the resource, or to the page. The first elements in the array will correspond to the top of the stack (most inclusive map). + +=cut + +sub getStack { + my $self=shift; + + my @stack; + + $self->populateStack(\@stack); + + return \@stack; +} + +# Private method: Calls the iterators recursively to populate the stack. +sub populateStack { + my $self=shift; + my $stack = shift; + + push @$stack, $self->{HERE} if ($self->{HERE}); + + if ($self->{RECURSIVE_ITERATOR_FLAG}) { + $self->{RECURSIVE_ITERATOR}->populateStack($stack); + } +} + +1; + +package Apache::lonnavmaps::DFSiterator; + +# Not documented in the perldoc: This is a simple iterator that just walks +# through the nav map and presents the resources in a depth-first search +# fashion, ignorant of conditionals, randomized resources, etc. It presents +# BEGIN_MAP and END_MAP, but does not understand branches at all. It is +# useful for pre-processing of some kind, and is in fact used by the main +# iterator that way, but that's about it. +# One could imagine merging this into the init routine of the main iterator, +# but this might as well be left seperate, since it is possible some other +# use might be found for it. - Jeremy + +# Unlike the main iterator, this DOES return all resources, even blank ones. +# The main iterator needs them to correctly preprocess the map. + +sub BEGIN_MAP { return 1; } # begining of a new map +sub END_MAP { return 2; } # end of the map +sub FORWARD { return 1; } # go forward +sub BACKWARD { return 2; } + +# Params: Nav map ref, first resource id/ref, finish resource id/ref, +# filter hash ref (or undef), already seen hash or undef, condition +# (as in main iterator), direction FORWARD or BACKWARD (undef->forward). +sub new { + # magic invocation to create a class instance + my $proto = shift; + my $class = ref($proto) || $proto; + my $self = {}; + + $self->{NAV_MAP} = shift; + return undef unless ($self->{NAV_MAP}); + + $self->{FIRST_RESOURCE} = shift || $self->{NAV_MAP}->firstResource(); + $self->{FINISH_RESOURCE} = shift || $self->{NAV_MAP}->finishResource(); + + # If the given resources are just the ID of the resource, get the + # objects + if (!ref($self->{FIRST_RESOURCE})) { $self->{FIRST_RESOURCE} = + $self->{NAV_MAP}->getById($self->{FIRST_RESOURCE}); } + if (!ref($self->{FINISH_RESOURCE})) { $self->{FINISH_RESOURCE} = + $self->{NAV_MAP}->getById($self->{FINISH_RESOURCE}); } + + $self->{FILTER} = shift; + + # A hash, used as a set, of resource already seen + $self->{ALREADY_SEEN} = shift; + if (!defined($self->{ALREADY_SEEN})) { $self->{ALREADY_SEEN} = {} }; + $self->{CONDITION} = shift; + $self->{DIRECTION} = shift || FORWARD(); + + # Flag: Have we started yet? $self->{STARTED} = 0; # Should we continue calling the recursive iterator, if any? @@ -1887,34 +1780,25 @@ sub new { $self->{RECURSIVE_DEPTH} = 0; # For keeping track of our branches, we maintain our own stack - $self->{BRANCH_STACK} = []; - # If the size shrinks, we exhausted a branch - $self->{BRANCH_STACK_SIZE} = 0; - $self->{BRANCH_DEPTH} = 0; - - # For returning two things in a forced sequence - $self->{FORCE_NEXT} = undef; + $self->{STACK} = []; # Start with the first resource - push @{$self->{BRANCH_STACK}}, $self->{FIRST_RESOURCE}; - $self->{BRANCH_STACK_SIZE} = 1; + if ($self->{DIRECTION} == FORWARD) { + push @{$self->{STACK}}, $self->{FIRST_RESOURCE}; + } else { + push @{$self->{STACK}}, $self->{FINISH_RESOURCE}; + } bless($self); return $self; } -# Note... this function is *touchy*. I strongly recommend tracing -# through it with the debugger a few times on a non-trivial map before -# modifying it. Order is *everything*. sub next { my $self = shift; - # Iterator logic goes here - # Are we using a recursive iterator? If so, pull from that and # watch the depth; we want to resume our level at the correct time. - if ($self->{RECURSIVE_ITERATOR_FLAG}) - { + if ($self->{RECURSIVE_ITERATOR_FLAG}) { # grab the next from the recursive iterator my $next = $self->{RECURSIVE_ITERATOR}->next(); @@ -1930,23 +1814,10 @@ sub next { return $next; } - # Is this return value pre-determined? - if (defined($self->{FORCE_NEXT})) { - my $tmp = $self->{FORCE_NEXT}; - $self->{FORCE_NEXT} = undef; - return $tmp; - } - # Is there a current resource to grab? If not, then return - # END_BRANCH and END_MAP in succession. - if (scalar(@{$self->{BRANCH_STACK}}) == 0) { - if ($self->{BRANCH_DEPTH} > 0) { - $self->{FORCE_NEXT} = $self->END_MAP(); - $self->{BRANCH_DEPTH}--; - return $self->END_BRANCH(); - } else { - return $self->END_MAP(); - } + # END_MAP, which will end the iterator. + if (scalar(@{$self->{STACK}}) == 0) { + return $self->END_MAP(); } # Have we not yet begun? If not, return BEGIN_MAP and @@ -1956,81 +1827,32 @@ sub next { return $self->BEGIN_MAP; } - # Did the branch stack shrink since last run? If so, - # we exhausted a branch last time, therefore, we're about - # to start a new one. (We know because we already checked to see - # if the stack was empty.) - if ( scalar (@{$self->{BRANCH_STACK}}) < $self->{BRANCH_STACK_SIZE}) { - $self->{BRANCH_STACK_SIZE} = scalar(@{$self->{BRANCH_STACK}}); - $self->{BRANCH_DEPTH}++; - return $self->BEGIN_BRANCH(); - } - - # Remember the size for comparision next time. - $self->{BRANCH_STACK_SIZE} = scalar(@{$self->{BRANCH_STACK}}); - - # If the next resource we mean to return is going to need - # a lower branch level, terminate branches until we get - # there. - # Get the next resource in the branch - $self->{HERE} = pop @{$self->{BRANCH_STACK}}; + $self->{HERE} = pop @{$self->{STACK}}; - # Are we at the right depth? If not, close a branch and return - # the current resource onto the branch stack - if (defined($self->{HERE}->{DATA}->{ITERATOR_DEPTH}) - && $self->{HERE}->{DATA}->{ITERATOR_DEPTH} < - $self->{BRANCH_DEPTH} ) { - $self->{BRANCH_DEPTH}--; - # return it so we can pick it up eventually - push @{$self->{BRANCH_STACK}}, $self->{HERE}; - return $self->END_BRANCH(); - } - - # We always return it after this point and never before - # (proof: look at just the return statements), so we - # remember that we've seen this. + # remember that we've seen this, so we don't return it again later $self->{ALREADY_SEEN}->{$self->{HERE}->{ID}} = 1; # Get the next possible resources - my $nextUnfiltered = $self->{HERE}->getNext(); + my $nextUnfiltered; + if ($self->{DIRECTION} == FORWARD()) { + $nextUnfiltered = $self->{HERE}->getNext(); + } else { + $nextUnfiltered = $self->{HERE}->getPrevious(); + } my $next = []; # filter the next possibilities to remove things we've - # already seen. Also, remember what branch depth they should - # be displayed at, since there's no other reliable way to tell. + # already seen. foreach (@$nextUnfiltered) { if (!defined($self->{ALREADY_SEEN}->{$_->{ID}})) { push @$next, $_; - $_->{DATA}->{ITERATOR_DEPTH} = - $self->{BRANCH_DEPTH} + 1; } } - # Handle branch cases: - # Nothing is available next: BRANCH_END - # 1 thing next: standard non-branch - # 2+ things next: have some branches - my $nextCount = scalar(@$next); - if ($nextCount == 0) { - # Return this and on the next run, close the branch up if we're - # in a branch - if ($self->{BRANCH_DEPTH} > 0 ) { - $self->{FORCE_NEXT} = $self->END_BRANCH(); - $self->{BRANCH_DEPTH}--; - } - } - while (@$next) { - # copy the next possibilities over to the branch stack - # in the right order - push @{$self->{BRANCH_STACK}}, shift @$next; - } - - if ($nextCount >= 2) { - $self->{FORCE_NEXT} = $self->BEGIN_BRANCH(); - $self->{BRANCH_DEPTH}++; - return $self->{HERE}; + # copy the next possibilities over to the stack + push @{$self->{STACK}}, shift @$next; } # If this is a map and we want to recurse down it... (not filtered out) @@ -2041,42 +1863,14 @@ sub next { my $finishResource = $self->{HERE}->map_finish(); $self->{RECURSIVE_ITERATOR} = - Apache::lonnavmaps::iterator->new ($self->{NAV_MAP}, $firstResource, + Apache::lonnavmaps::DFSiterator->new ($self->{NAV_MAP}, $firstResource, $finishResource, $self->{FILTER}, $self->{ALREADY_SEEN}, - $self->{CONDITION}); + $self->{CONDITION}, $self->{DIRECTION}); } return $self->{HERE}; } -=pod - -The other method available on the iterator is B, which returns an array populated with the current 'stack' of maps, as references to the resource objects. Example: This is useful when making the navigation map, as we need to check whether we are under a page map to see if we need to link directly to the resource, or to the page. The first elements in the array will correspond to the top of the stack (most inclusive map). - -=cut - -sub getStack { - my $self=shift; - - my @stack; - - $self->populateStack(\@stack); - - return \@stack; -} - -# Private method: Calls the iterators recursively to populate the stack. -sub populateStack { - my $self=shift; - my $stack = shift; - - push @$stack, $self->{HERE}; - - if ($self->{RECURSIVE_ITERATOR_FLAG}) { - $self->{RECURSIVE_ITERATOR}->populateStack($stack); - } -} - 1; package Apache::lonnavmaps::resource; @@ -2137,24 +1931,26 @@ sub navHash { my $self = shift; my $param = shift; my $id = shift; - return $self->{NAV_MAP}->{NAV_HASH}->{$param . ($id?$self->{ID}:"")}; + return $self->{NAV_MAP}->navhash($param . ($id?$self->{ID}:"")); } =pod B -These are methods that help you retrieve metadata about the resource: +These are methods that help you retrieve metadata about the resource: Method names are based on the fields in the compiled course representation. =over 4 +=item * B: Returns a "composite title", that is equal to $res->title() if the resource has a title, and is otherwise the last part of the URL (e.g., "problem.problem"). + =item * B: Returns true if the resource is external. =item * B: Returns the "goesto" value from the compiled nav map. (It is likely you want to use B instead.) =item * B: Returns the kind of the resource from the compiled nav map. -=item * B: Returns true if this resource was chosen to NOT be shown to the user by the random map selection feature. +=item * B: Returns true if this resource was chosen to NOT be shown to the user by the random map selection feature. In other words, this is usually false. =item * B: Returns true for a map if the randompick feature is being used on the map. (?) @@ -2166,15 +1962,15 @@ These are methods that help you retrieve =item * B: Returns the "to" value from the compiled nav map. (It is likely you want to use B instead.) -=item * B: Returns the type of the resource, "start", "normal", or "finish". - =back =cut # These info functions can be used directly, as they don't return # resource information. +sub comesfrom { my $self=shift; return $self->navHash("comesfrom_", 1); } sub ext { my $self=shift; return $self->navHash("ext_", 1) eq 'true:'; } +sub from { my $self=shift; return $self->navHash("from_", 1); } sub goesto { my $self=shift; return $self->navHash("goesto_", 1); } sub kind { my $self=shift; return $self->navHash("kind_", 1); } sub randomout { my $self=shift; return $self->navHash("randomout_", 1); } @@ -2197,8 +1993,15 @@ sub symb { } sub title { my $self=shift; return $self->navHash("title_", 1); } sub to { my $self=shift; return $self->navHash("to_", 1); } -sub type { my $self=shift; return $self->navHash("type_", 1); } - +sub compTitle { + my $self = shift; + my $title = $self->title(); + if (!$title) { + $title = $self->src(); + $title = substr($title, rindex($title, '/') + 1); + } + return $title; +} =pod B @@ -2215,7 +2018,7 @@ These methods are shortcuts to deciding =item * B: Returns true if the resource is a problem. -=item * B: Returns true if the resource sequence. +=item * B: Returns true if the resource is a sequence. =back @@ -2244,12 +2047,7 @@ sub is_sequence { return ($src =~ /sequence$/); } - - - - -# Move this into POD: In order to use these correctly, courseopt -# and useropt need to be generated +# Private method: Shells out to the parmval in the nav map, handler parts. sub parmval { my $self = shift; my $what = shift; @@ -2363,6 +2161,7 @@ sub answerdate { } return $self->parmval("answerdate", $part); } +sub awarded { my $self = shift; return $self->queryRestoreHash('awarded', shift); } sub duedate { (my $self, my $part) = @_; return $self->parmval("duedate", $part); @@ -2387,24 +2186,18 @@ sub tol { (my $self, my $part) = @_; return $self->parmval("tol", $part); } -sub tries { - my $self = shift; - my $part = shift; - $part = '0' if (!defined($part)); - - # Make sure return hash is loaded, should error check - $self->getReturnHash(); - - my $tries = $self->{RETURN_HASH}->{'resource.'.$part.'.tries'}; - if (!defined($tries)) {return '0';} +sub tries { + my $self = shift; + my $tries = $self->queryRestoreHash('tries', shift); + if (!defined($tries)) { return '0';} return $tries; } sub type { (my $self, my $part) = @_; return $self->parmval("type", $part); } -sub weight { - (my $self, my $part) = @_; +sub weight { + my $self = shift; my $part = shift; return $self->parmval("weight", $part); } @@ -2413,7 +2206,7 @@ sub getReturnHash { my $self = shift; if (!defined($self->{RETURN_HASH})) { - my %tmpHash = &Apache::lonnet::restore($self->symb()); + my %tmpHash = &Apache::lonnet::restore($self->symb()); $self->{RETURN_HASH} = \%tmpHash; } } @@ -2459,7 +2252,16 @@ sub hasDiscussion { sub getFeedback { my $self = shift; - return $self->{NAV_MAP}->getFeedback($self->symb()); + my $source = $self->src(); + if ($source =~ /^\/res\//) { $source = substr $source, 5; } + return $self->{NAV_MAP}->getFeedback($source); +} + +sub getErrors { + my $self = shift; + my $source = $self->src(); + if ($source =~ /^\/res\//) { $source = substr $source, 5; } + return $self->{NAV_MAP}->getErrors($source); } =pod @@ -2485,14 +2287,16 @@ sub countParts { my $self = shift; my $parts = $self->parts(); + my $delta = 0; + for my $part (@$parts) { + if ($part eq '0') { $delta--; } + } if ($self->{RESOURCE_ERROR}) { return 0; } - if (scalar(@{$parts}) < 2) { return 1;} - - return scalar(@{$parts}) - 1; + return scalar(@{$parts}) + $delta; } # Private function: Extracts the parts information and saves it @@ -2504,25 +2308,27 @@ sub extractParts { $self->{PARTS} = []; - # Retrieve part count - my $metadata = &Apache::lonnet::metadata($self->src(), 'allpossiblekeys'); - if (!$metadata) { - $self->{RESOURCE_ERROR} = 1; - $self->{PARTS} = []; - return; - } - - foreach (split(/\,/,$metadata)) { - if ($_ =~ /^parameter\_(.*)\_opendate$/) { - push @{$self->{PARTS}}, $1; + # Retrieve part count, if this is a problem + if ($self->is_problem()) { + my $metadata = &Apache::lonnet::metadata($self->src(), 'packages'); + if (!$metadata) { + $self->{RESOURCE_ERROR} = 1; + $self->{PARTS} = []; + return; } + + foreach (split(/\,/,$metadata)) { + if ($_ =~ /^part_(.*)$/) { + push @{$self->{PARTS}}, $1; + } + } + + + # Is this possible to do in one line? - Jeremy + my @sortedParts = sort @{$self->{PARTS}}; + $self->{PARTS} = \@sortedParts; } - - # Is this possible to do in one line? - Jeremy - my @sortedParts = sort @{$self->{PARTS}}; - $self->{PARTS} = \@sortedParts; - return; } @@ -2530,7 +2336,7 @@ sub extractParts { =head2 Resource Status -Problem resources have status information, reflecting their various dates and completion statuses. You can obtain this information and import symbolic constants to represent the status. +Problem resources have status information, reflecting their various dates and completion statuses. There are two aspects to the status: the date-related information and the completion information. @@ -2547,6 +2353,10 @@ Idiomatic usage of these two methods wou ... use it here ... } +Which you use depends on exactly what you are looking for. The status() function has been optimized for the nav maps display and may not precisely match what you need elsewhere. + +The symbolic constants shown below can be accessed through the resource object: $res->OPEN. + =over 4 =item * B($part): ($part defaults to 0). A convenience function that returns a symbolic constant telling you about the date status of the part. The possible return values are: @@ -2660,14 +2470,9 @@ sub ATTEMPTED { return 16; } sub getCompletionStatus { my $self = shift; - my $part = shift; - $part = "0" if (!defined($part)); return $self->NETWORK_FAILURE if ($self->{NAV_MAP}->{NETWORK_FAILURE}); - # Make sure return hash exists - $self->getReturnHash(); - - my $status = $self->{RETURN_HASH}->{'resource.'.$part.'.solved'}; + my $status = $self->queryRestoreHash('solved', shift); # Left as seperate if statements in case we ever do more with this if ($status eq 'correct_by_student') {return $self->CORRECT;} @@ -2679,11 +2484,23 @@ sub getCompletionStatus { return $self->NOT_ATTEMPTED; } +sub queryRestoreHash { + my $self = shift; + my $hashentry = shift; + my $part = shift; + $part = "0" if (!defined($part)); + return $self->NETWORK_FAILURE if ($self->{NAV_MAP}->{NETWORK_FAILURE}); + + $self->getReturnHash(); + + return $self->{RETURN_HASH}->{'resource.'.$part.'.'.$hashentry}; +} + =pod B -Along with directly returning the date or completion status, the resource object includes a convenience function B() that will combine the two status tidbits into one composite status that can represent the status of the resource as a whole. The precise logic is documented in the comments of the status method. The following results may be returned, all available as methods on the resource object ($res->NETWORK_FAILURE()): +Along with directly returning the date or completion status, the resource object includes a convenience function B() that will combine the two status tidbits into one composite status that can represent the status of the resource as a whole. The precise logic is documented in the comments of the status method. The following results may be returned, all available as methods on the resource object ($res->NETWORK_FAILURE): =over 4 @@ -2771,7 +2588,7 @@ sub status { # If it's WRONG... if ($completionStatus == INCORRECT || $completionStatus == INCORRECT_BY_OVERRIDE) { # and there are TRIES LEFT: - if ($self->tries() < $self->maxtries()) { + if ($self->tries($part) < $self->maxtries($part) || !$self->maxtries($part)) { return TRIES_LEFT; } return INCORRECT; # otherwise, return orange; student can't fix this @@ -2787,36 +2604,49 @@ sub status { =over 4 -=item * B(): Gets the next resource in the navmap after this one. +=item * B(): Retreive an array of the possible next resources after this one. Always returns an array, even in the one- or zero-element case. -=cut +=item * B(): Retreive an array of the possible previous resources from this one. Always returns an array, even in the one- or zero-element case. -# For the simple single-link case, to get from a resource to the next -# resource, you need to look up the "to_" link in the nav hash, then -# follow that with the "goesto_" link. +=cut sub getNext { my $self = shift; - my $alreadySeenHash = shift; my @branches; my $to = $self->to(); - foreach my $branch ( split(/\,/, $to) ) { + foreach my $branch ( split(/,/, $to) ) { my $choice = $self->{NAV_MAP}->getById($branch); my $next = $choice->goesto(); $next = $self->{NAV_MAP}->getById($next); - # Don't remember it if we've already seen it or if - # the student doesn't have browse priviledges - my $browsePriv = &Apache::lonnet::allowed('bre', $self->src); - if (!defined($alreadySeenHash) || - !defined($alreadySeenHash->{$next->{ID}}) || - ($browsePriv ne '2' && $browsePriv ne 'F')) { - push @branches, $next; - } + push @branches, $next; } return \@branches; } +sub getPrevious { + my $self = shift; + my @branches; + my $from = $self->from(); + foreach my $branch ( split /,/, $from) { + my $choice = $self->{NAV_MAP}->getById($branch); + my $prev = $choice->comesfrom(); + $prev = $self->{NAV_MAP}->getById($prev); + + push @branches, $prev; + } + return \@branches; +} + +sub browsePriv { + my $self = shift; + if (defined($self->{BROWSE_PRIV})) { + return $self->{BROWSE_PRIV}; + } + + $self->{BROWSE_PRIV} = &Apache::lonnet::allowed('bre', $self->src()); +} + =pod =back