--- loncom/interface/lonnavmaps.pm 2003/01/28 22:25:54 1.131 +++ loncom/interface/lonnavmaps.pm 2003/04/01 19:28:05 1.170 @@ -2,7 +2,7 @@ # The LearningOnline Network with CAPA # Navigate Maps Handler # -# $Id: lonnavmaps.pm,v 1.131 2003/01/28 22:25:54 bowersj2 Exp $ +# $Id: lonnavmaps.pm,v 1.170 2003/04/01 19:28:05 matthew Exp $ # # Copyright Michigan State University Board of Trustees # @@ -38,31 +38,63 @@ # YEAR=2002 # 1/1 Gerd Kortemeyer # Oct-Nov Jeremy Bowers +# YEAR=2003 +# Jeremy Bowers ... lots of days package Apache::lonnavmaps; use strict; use Apache::Constants qw(:common :http); use Apache::loncommon(); +use Apache::lonmenu(); use POSIX qw (floor strftime); -my %navmaphash; -my %parmhash; - -sub cleanup { - if (tied(%navmaphash)){ - &Apache::lonnet::logthis('Cleanup navmaps: navmaphash'); - unless (untie(%navmaphash)) { - &Apache::lonnet::logthis('Failed cleanup navmaps: navmaphash'); - } - } - if (tied(%parmhash)){ - &Apache::lonnet::logthis('Cleanup navmaps: parmhash'); - unless (untie(%parmhash)) { - &Apache::lonnet::logthis('Failed cleanup navmaps: parmhash'); - } - } -} +# symbolic constants +sub SYMB { return 1; } +sub URL { return 2; } +sub NOTHING { return 3; } + +# Some data + +my $resObj = "Apache::lonnavmaps::resource"; + +# Keep these mappings in sync with lonquickgrades, which uses the colors +# instead of the icons. +my %statusIconMap = + ( $resObj->NETWORK_FAILURE => '', + $resObj->NOTHING_SET => '', + $resObj->CORRECT => 'navmap.correct.gif', + $resObj->EXCUSED => 'navmap.correct.gif', + $resObj->PAST_DUE_NO_ANSWER => 'navmap.wrong.gif', + $resObj->PAST_DUE_ANSWER_LATER => 'navmap.wrong.gif', + $resObj->ANSWER_OPEN => 'navmap.wrong.gif', + $resObj->OPEN_LATER => '', + $resObj->TRIES_LEFT => 'navmap.open.gif', + $resObj->INCORRECT => 'navmap.wrong.gif', + $resObj->OPEN => 'navmap.open.gif', + $resObj->ATTEMPTED => 'navmap.open.gif' ); + +my %iconAltTags = + ( 'navmap.correct.gif' => 'Correct', + 'navmap.wrong.gif' => 'Incorrect', + 'navmap.open.gif' => 'Open' ); + +# Defines a status->color mapping, null string means don't color +my %colormap = + ( $resObj->NETWORK_FAILURE => '', + $resObj->CORRECT => '', + $resObj->EXCUSED => '#3333FF', + $resObj->PAST_DUE_ANSWER_LATER => '', + $resObj->PAST_DUE_NO_ANSWER => '', + $resObj->ANSWER_OPEN => '#006600', + $resObj->OPEN_LATER => '', + $resObj->TRIES_LEFT => '', + $resObj->INCORRECT => '', + $resObj->OPEN => '', + $resObj->NOTHING_SET => '' ); +# And a special case in the nav map; what to do when the assignment +# is not yet done and due in less then 24 hours +my $hurryUpColor = "#FF0000"; sub handler { my $r = shift; @@ -72,8 +104,6 @@ sub handler { sub real_handler { my $r = shift; - &Apache::loncommon::get_unprocessed_cgi($ENV{QUERY_STRING}); - # Handle header-only request if ($r->header_only) { if ($ENV{'browser.mathml'}) { @@ -107,11 +137,22 @@ sub real_handler { } $r->print("\n"); - $r->print("Navigate Course Contents"); + $r->print("Navigate Course Contents"); +# ------------------------------------------------------------ Get query string + &Apache::loncommon::get_unprocessed_cgi($ENV{'QUERY_STRING'},['register']); + +# ----------------------------------------------------- Force menu registration + my $addentries=''; + if ($ENV{'form.register'}) { + $addentries=' onLoad="'.&Apache::lonmenu::loadevents(). + '" onUnload="'.&Apache::lonmenu::unloadevents().'"'; + $r->print(&Apache::lonmenu::registerurl(1)); + } # Header - $r->print(&Apache::loncommon::bodytag('Navigate Course Contents','', - '')); + $r->print(''. + &Apache::loncommon::bodytag('Navigate Course Contents','', + $addentries,'','',$ENV{'form.register'})); $r->print(''); $r->rflush(); @@ -119,85 +160,6 @@ sub real_handler { # Now that we've displayed some stuff to the user, init the navmap $navmap->init(); - $r->print(''); - my $date=localtime; - $r->print(''); - - # Print discussions and feedback header - if ($navmap->{LAST_CHECK}) { - $r->print(''); - } else { - $r->print(''); - } - $r->print('
Key:    '. - ' New discussion since '. - strftime("%A, %b %e at %I:%M %P", localtime($navmap->{LAST_CHECK})). - '  '. - ' New message (click to open)

'. - '

  '. - ' Discussions'. - '   New message (click to open)'. - '
'); - - my $condition = 0; - if ($ENV{'form.condition'}) { - $condition = 1; - } - - # Determine where the "here" marker is and where the screen jumps to. - my $SYMB = 1; my $URL = 2; my $NOTHING = 3; # symbolic constants - my $hereType; # the type of marker, $SYMB, $URL, or $NOTHING - my $here; # the actual URL or SYMB for the here marker - my $jumpType; # The type of the thing we have a jump for, $SYMB or $URL - my $jump; # the SYMB/URL of the resource we need to jump to - - if ( $ENV{'form.alreadyHere'} ) { # we came from a user's manipulation of the nav page - # If this is a click on a folder or something, we want to preserve the "here" - # from the querystring, and get the new "jump" marker - $hereType = $ENV{'form.hereType'}; - $here = $ENV{'form.here'}; - $jumpType = $ENV{'form.jumpType'} || $NOTHING; - $jump = $ENV{'form.jump'}; - } else { # the user is visiting the nav map from the remote - # We're coming from the remote. We have either a url, a symb, or nothing, - # and we need to figure out what. - # Preference: Symb - - if ($ENV{'form.symb'}) { - $hereType = $jumpType = $SYMB; - $here = $jump = $ENV{'form.symb'}; - } elsif ($ENV{'form.postdata'}) { - # couldn't find a symb, is there a URL? - my $currenturl = $ENV{'form.postdata'}; - $currenturl=~s/^http\:\/\///; - $currenturl=~s/^[^\/]+//; - - $hereType = $jumpType = $URL; - $here = $jump = $currenturl; - } else { - # Nothing - $hereType = $jumpType = $NOTHING; - } - } - - - # alreadyHere allows us to only open the maps necessary to view - # the current location once, while at the same time remembering - # the current location. Without that check, the user would never - # be able to close those maps; the user would close it, and the - # currenturl scan would re-open it. - my $queryAdd = "&alreadyHere=1"; - - if ($condition) { - $r->print("Close All Folders"); - } else { - $r->print("Open All Folders"); - } - $r->print('
 '); $r->rflush(); @@ -208,505 +170,43 @@ sub real_handler { return OK; } - # Grab a resource object so we have access to the constants; this - # is technically not proper, but should be harmless - my $res = $navmap->firstResource(); - - # These are some data tables, which make it easy to change some of - # of the specific visualization parameters if desired. - - # Defines a status->color mapping, null string means don't color - my %colormap = - ( $res->NETWORK_FAILURE => '', - $res->CORRECT => '', - $res->EXCUSED => '#3333FF', - $res->PAST_DUE_ANSWER_LATER => '', - $res->PAST_DUE_NO_ANSWER => '', - $res->ANSWER_OPEN => '#006600', - $res->OPEN_LATER => '', - $res->TRIES_LEFT => '', - $res->INCORRECT => '', - $res->OPEN => '', - $res->NOTHING_SET => '' ); - # And a special case in the nav map; what to do when the assignment - # is not yet done and due in less then 24 hours - my $hurryUpColor = "#FF0000"; - - # Keep these mappings in sync with lonquickgrades, which uses the colors - # instead of the icons. - my %statusIconMap = - ( $res->NETWORK_FAILURE => '', - $res->NOTHING_SET => '', - $res->CORRECT => 'navmap.correct.gif', - $res->EXCUSED => 'navmap.correct.gif', - $res->PAST_DUE_NO_ANSWER => 'navmap.wrong.gif', - $res->PAST_DUE_ANSWER_LATER => 'navmap.wrong.gif', - $res->ANSWER_OPEN => 'navmap.wrong.gif', - $res->OPEN_LATER => '', - $res->TRIES_LEFT => 'navmap.open.gif', - $res->INCORRECT => 'navmap.wrong.gif', - $res->OPEN => 'navmap.open.gif', - $res->ATTEMPTED => 'navmap.open.gif' ); - - my %iconAltTags = - ( 'navmap.correct.gif' => 'Correct', - 'navmap.wrong.gif' => 'Incorrect', - 'navmap.open.gif' => 'Open' ); - - my %condenseStatuses = - ( $res->NETWORK_FAILURE => 1, - $res->NOTHING_SET => 1, - $res->CORRECT => 1 ); - - my %filterHash; - # Figure out what we're not displaying - foreach (split(/\,/, $ENV{"form.filter"})) { - if ($_) { - $filterHash{$_} = "1"; - } - } - - # Is this a new-style course? If so, we want to suppress showing the top-level - # maps in their own folders, in favor of "inlining" them. - my $topResource = $navmap->getById("0.0"); - - # Begin the HTML table - # four cols: resource + indent, chat+feedback, icon, text string - $r->print('' ."\n"); - - # This needs to be updated to use symbs from the remote, - # instead of uris. The changes to this and the main rendering - # loop should be obvious. - # Here's a simple example of the iterator. - # Preprocess the map: Look for current URL, force inlined maps to display - - my $mapIterator = $navmap->getIterator(undef, undef, undef, 1); - my $found = 0; + # See if there's only one map in the top-level... if so, + # automatically display it + my $iterator = $navmap->getIterator(undef, undef, undef, 0); my $depth = 1; - my $currentJumpIndex = 0; # keeps track of when the current resource is found, - # so we can back up a few and put the anchor above the - # current resource - my $currentJumpDelta = 2; # change this to change how many resources are displayed - # before the current resource when using #current - $mapIterator->next(); # discard the first BEGIN_MAP - my $curRes = $mapIterator->next(); - my $counter = 0; - my $foundJump = ($jumpType == $NOTHING); # look for jump point if we have one - my $looped = 0; - - # We only need to do this if we need to open the maps to show the - # current position. This will change the counter so we can't count - # for the jump marker with this loop. - while ($depth > 0 && !$ENV{'form.alreadyHere'}) { - if ($curRes == $mapIterator->BEGIN_MAP()) { $depth++; } - if ($curRes == $mapIterator->END_MAP()) { $depth--; } - - if (ref($curRes) && !$ENV{'form.alreadyHere'} && - ($hereType == $SYMB && $curRes->symb() eq $here) || - (ref($curRes) && $hereType == $URL && $curRes->src() eq $here)) { - my $mapStack = $mapIterator->getStack(); - - # Ensure the parent maps are open - for my $map (@{$mapStack}) { - if ($condition) { - undef $filterHash{$map->map_pc()}; - } else { - $filterHash{$map->map_pc()} = 1; - } - } - $ENV{'form.alreadyHere'} = 1; - } - $looped = 1; - - $curRes = $mapIterator->next(); - } - - $mapIterator = $navmap->getIterator(undef, undef, \%filterHash, 0); - $depth = 1; - $mapIterator->next(); - $curRes = $mapIterator->next(); - - while ($depth > 0 && !$foundJump) { - if ($curRes == $mapIterator->BEGIN_MAP()) { $depth++; } - if ($curRes == $mapIterator->END_MAP()) { $depth--; } - if (ref($curRes)) { $counter++; } - - if (ref($curRes) && - (($jumpType == $SYMB && $curRes->symb() eq $jump) || - ($jumpType == $URL && $curRes->src() eq $jump))) { - # If this is the correct resource, be sure to - # show it by making sure the containing maps - # are open. - - # This is why we have to use the main iterator instead of the - # potentially faster DFS: The count has to be the same, so - # the order has to be the same, which DFS won't give us. - $currentJumpIndex = $counter; - $foundJump = 1; - } - - $curRes = $mapIterator->next(); - } - - undef $res; # so we don't accidentally use it later - my $indentLevel = 0; - my $indentString = "\"\""; - - my $isNewBranch = 0; - my $now = time(); - my $in24Hours = $now + 24 * 60 * 60; - my $displayedHereMarker = 0; - my $displayedJumpMarker = 0; - - # We know the first thing is a BEGIN_MAP (see "$self->{STARTED}" - # code in iterator->next), so ignore the first one - $mapIterator = $navmap->getIterator(undef, undef, \%filterHash, - $condition); - $mapIterator->next(); - $curRes = $mapIterator->next(); - $depth = 1; - - my @backgroundColors = ("#FFFFFF", "#F6F6F6"); - my $rowNum = 0; - - $counter = 0; - + $iterator->next(); + my $curRes = $iterator->next(); + my $sequenceCount = 0; + my $sequenceId; while ($depth > 0) { - if ($curRes == $mapIterator->BEGIN_MAP() || - $curRes == $mapIterator->BEGIN_BRANCH()) { - $indentLevel++; - } - if ($curRes == $mapIterator->END_MAP() || - $curRes == $mapIterator->END_BRANCH()) { - $indentLevel--; - } - if ($curRes == $mapIterator->BEGIN_BRANCH()) { - $isNewBranch = 1; - } - if ($curRes == $mapIterator->BEGIN_MAP()) { $depth++; } - if ($curRes == $mapIterator->END_MAP()) { $depth--; } + if ($curRes == $iterator->BEGIN_MAP()) { $depth++; } + if ($curRes == $iterator->END_MAP()) { $depth--; } - if (ref($curRes)) { $counter++; } - - # Is this resource being ignored because it is in a random-out - # map and it was not selected? - if (ref($curRes) && !advancedUser() && $curRes->randomout()) { - $curRes = $mapIterator->next(); - next; # if yes, then just ignore this resource + if (ref($curRes) && $curRes->is_sequence()) { + $sequenceCount++; + $sequenceId = $curRes->map_pc(); } - if (ref($curRes)) { - - my $deltalevel = $isNewBranch? 1 : 0; # reserves space for branch icon - - if ($indentLevel - $deltalevel < 0) { - # If this would be at a negative depth (top-level maps in - # new-style courses, we want to suppress their title display) - # then ignore it. - $curRes = $mapIterator->next(); - next; - } - - # Step one: Decide which parts to show - my @parts = @{$curRes->parts()}; - my $multipart = scalar(@parts) > 1; - my $condensed = 0; - - if ($curRes->is_problem()) { - - # Is it multipart? - if ($multipart) { - # If it's multipart, see if part 0 is "open" - # if it is, display all parts, if it isn't, - # just display first - if (!$curRes->opendate("0")) { - # no parts are open, display as one part - @parts = ("0"); - $condensed = 1; - } else { - # Otherwise, only display part 0 if we want to - # attach feedback or email information to it - if ($curRes->hasDiscussion() || $curRes->getFeedback()) { - shift @parts; - } else { - # Now, we decide whether to condense the - # parts due to similarity - my $status = $curRes->status($parts[1]); - my $due = $curRes->duedate($parts[1]); - my $open = $curRes->opendate($parts[1]); - my $statusAllSame = 1; - my $dueAllSame = 1; - my $openAllSame = 1; - for (my $i = 2; $i < scalar(@parts); $i++) { - if ($curRes->status($parts[$i]) != $status){ - $statusAllSame = 0; - } - if ($curRes->duedate($parts[$i]) != $due ) { - $dueAllSame = 0; - } - if ($curRes->opendate($parts[$i]) != $open) { - $openAllSame = 0; - } - } - - # $allSame is true if all the statuses were - # the same. Now, if they are all the same and - # match one of the statuses to condense, or they - # are all open with the same due date, or they are - # all OPEN_LATER with the same open date, display the - # status of the first non-zero part (to get the 'correct' - # status right, since 0 is never 'correct' or 'open'). - if (($statusAllSame && defined($condenseStatuses{$status})) || - ($dueAllSame && $status == $curRes->OPEN && $statusAllSame)|| - ($openAllSame && $status == $curRes->OPEN_LATER && $statusAllSame) ){ - @parts = ($parts[1]); - $condensed = 1; - } - } - } - } - - } else { - $parts[0] = "0"; # this is to get past foreach loop below - # you can consider a non-problem resource as a resource - # with only one part without loss, and it simplifies the looping - } - - # Is it a multipart problem with a single part, now in - # @parts with "0" filtered out? If so, 'forget' it's a multi-part - # problem and treat it like a single-part problem. - if ( scalar(@parts) == 1 ) { - $multipart = 0; - } - - # Display one part, in event of network error. - # If this is a single part, we can at least show the correct - # status, but if it's multipart, we're lost, since we can't - # retreive the metadata to count the parts - if ($curRes->{RESOURCE_ERROR}) { - @parts = ("0"); - } - - # Step Two: Print the actual data. - - # For each part we intend to display... - foreach my $part (@parts) { - - my $nonLinkedText = ""; # unlinked stuff after title - - my $stack = $mapIterator->getStack(); - my $src = getLinkForResource($stack); - - # Pass the correct symb on the querystring, so the - # remote will figure out where we are if we click a link - my $srcHasQuestion = $src =~ /\?/; - my $link = $src. - ($srcHasQuestion?'&':'?') . - 'symb='.&Apache::lonnet::escape($curRes->symb()). - '"'; - - my $title = $curRes->compTitle(); - if ($src=~/^\/uploaded\//) { - $nonLinkedText=$title; - $title=''; - } - my $partLabel = ""; - my $newBranchText = ""; - - # If this is a new branch, label it so - if ($isNewBranch) { - $newBranchText = ""; - $isNewBranch = 0; - } - - # links to open and close the folders - my $linkopen = ""; - my $linkclose = ""; - - my $icon = "\"\""; - if ($curRes->is_problem()) { - if ($part eq "0" || $condensed) { - $icon = ''; - } else { - $icon = $indentString; - } - } - - # Display the correct icon, link to open or shut map - if ($curRes->is_map()) { - my $mapId = $curRes->map_pc(); - my $nowOpen = (!defined($filterHash{$mapId})); - if ($condition) {$nowOpen = !$nowOpen;} - $icon = $nowOpen ? - "navmap.folder.closed.gif" : "navmap.folder.open.gif"; - $icon = "\"\""; - $linkopen = ""; - $linkclose = ""; - - } - - my $colorizer = ""; - my $color; - if ($curRes->is_problem()) { - $color = $colormap{$curRes->status}; - - if (dueInLessThen24Hours($curRes, $part) || - lastTry($curRes, $part)) { - $color = $hurryUpColor; - } - - if ($color ne "") { - $colorizer = "bgcolor=\"$color\""; - } - } - - if ($curRes->randomout()) { - $nonLinkedText .= ' (hidden) '; - } - - $rowNum++; - my $backgroundColor = $backgroundColors[$rowNum % scalar(@backgroundColors)]; - - # FIRST COL: The resource indentation, branch icon, name, and anchor - $r->print(" \n"); - - # SECOND COL: Is there text, feedback, errors?? - my $discussionHTML = ""; my $feedbackHTML = ""; my $errorHTML = ""; - - if ($curRes->hasDiscussion()) { - $discussionHTML = $linkopen . - '' . - $linkclose; - } - - if ($curRes->getFeedback()) { - my $feedback = $curRes->getFeedback(); - foreach (split(/\,/, $feedback)) { - if ($_) { - $feedbackHTML .= ' ' - . ''; - } - } - } - - if ($curRes->getErrors()) { - my $errors = $curRes->getErrors(); - foreach (split(/,/, $errors)) { - if ($_) { - $errorHTML .= ' ' - . ''; - } - } - } - - $r->print(""); - - # Is this the first displayed part of a multi-part problem - # that has not been condensed, so we should suppress these two - # columns so we don't display useless status info about part - # "0"? - my $firstDisplayed = !$condensed && $multipart && $part eq "0"; - - # THIRD COL: Problem status icon - if ($curRes->is_problem() && - !$firstDisplayed) { - my $icon = $statusIconMap{$curRes->status($part)}; - my $alt = $iconAltTags{$icon}; - if ($icon) { - $r->print("\n"); - } else { - $r->print("\n"); - } - } else { # not problem, no icon - $r->print("\n"); - } - - # FOURTH COL: Text description - $r->print("\n"); - - if (!($counter % 20)) { $r->rflush(); } - if ($counter == 2) { $r->rflush(); } - } - } - $curRes = $mapIterator->next(); + $curRes = $iterator->next(); } - $r->print("
\n"); - - # Print the anchor if necessary - if ($counter == $currentJumpIndex - $currentJumpDelta ) { - $r->print(''); - $displayedJumpMarker = 1; - } - - # print indentation - for (my $i = 0; $i < $indentLevel - $deltalevel; $i++) { - $r->print($indentString); - } - - $r->print(" ${newBranchText}${linkopen}$icon${linkclose}\n"); - - my $curMarkerBegin = ""; - my $curMarkerEnd = ""; - - # Is this the current resource? - if (!$displayedHereMarker && - (($hereType == $SYMB && $curRes->symb eq $here) || - ($hereType == $URL && $curRes->src eq $here))) { - $curMarkerBegin = '> '; - $curMarkerEnd = ' <'; - $displayedHereMarker = 1; - } - - if ($curRes->is_problem() && $part ne "0" && !$condensed) { - $partLabel = " (Part $part)"; - $title = ""; - } - if ($multipart && $condensed) { - $nonLinkedText .= ' (' . $curRes->countParts() . ' parts)'; - } - - $r->print(" $curMarkerBegin$title$partLabel $curMarkerEnd $nonLinkedText"); - - #if ($curRes->{RESOURCE_ERROR}) { - # $r->print(&Apache::loncommon::help_open_topic ("Navmap_Host_Down", - # 'Host down')); - # } - - $r->print("$discussionHTML$feedbackHTML$errorHTML $linkopen\"$alt\"$linkclose  \n"); - - if ($curRes->kind() eq "res" && - $curRes->is_problem() && - !$firstDisplayed) { - $r->print ("") if ($color); - $r->print (getDescription($curRes, $part)); - $r->print ("") if ($color); - } - if ($curRes->is_map() && advancedUser() && $curRes->randompick()) { - $r->print('(randomly select ' . $curRes->randompick() .')'); - } - - $r->print(" 
"); - - # Print out the part that jumps to #curloc if it exists - if ($displayedJumpMarker) { - $r->print(''); + if ($sequenceCount == 1) { + # The automatic iterator creation in the render call + # will pick this up. + $ENV{'form.filter'} = "$sequenceId"; } + # renderer call + my $render = render({ 'cols' => [0,1,2,3], + 'url' => '/adm/navmaps', + 'navmap' => $navmap, + 'suppressNavmap' => 1, + 'r' => $r}); + $navmap->untieHashes(); $r->print(""); + $r->rflush(); return OK; } @@ -844,6 +344,12 @@ sub lastTry { } # This puts a human-readable name on the ENV variable. +# FIXME: This needs better logic: Who gets the advanced view of navmaps? +# As of 3-13-03, it's an open question. Guy doesn't want to check +# roles directly because it should be a check of capabilities for future +# role compatibity. There is no capability that matches this one for +# now, so this is done. (A hack for 1.0 might be to simply check roles +# anyhow.) sub advancedUser { return $ENV{'user.adv'}; } @@ -954,13 +460,767 @@ sub timeToHumanString { } } + +=pod + +=head1 navmap renderer + +The navmaprenderer package provides a sophisticated rendering of the standard navigation maps interface into HTML. The provided nav map handler is actually just a glorified call to this. + +Because of the large number of parameters this function presents, instead of passing it arguments as is normal, pass it in an anonymous hash with the given options. This is because there is no obvious order you may wish to override these in and a hash is easier to read and understand then "undef, undef, undef, 1, undef, undef, renderButton, undef, 0" when you mostly want default behaviors. + +The package provides a function called 'render', called as Apache::lonnavmaps::renderer->render({}). + +=head2 Overview of Columns + +The renderer will build an HTML table for the navmap and return it. The table is consists of several columns, and a row for each resource (or possibly each part). You tell the renderer how many columns to create and what to place in each column, optionally using one or more of the preparent columns, and the renderer will assemble the table. + +Any additional generally useful column types should be placed in the renderer code here, so anybody can use it anywhere else. Any code specific to the current application (such as the addition of elements in a column) should be placed in the code of the thing using the renderer. + +At the core of the renderer is the array reference COLS (see Example section below for how to pass this correctly). The COLS array will consist of entries of one of two types of things: Either an integer representing one of the pre-packaged column types, or a sub reference that takes a resource reference, a part number, and a reference to the argument hash passed to the renderer, and returns a string that will be inserted into the HTML representation as it. + +The pre-packaged column names are refered to by constants in the Apache::lonnavmaps::renderer namespace. The following currently exist: + +=over 4 + +=item * B: The general info about the resource: Link, icon for the type, etc. The first column in the standard nav map display. This column also accepts the following parameter in the renderer hash: + +=over 4 + +=item * B: If true, the resource will not be linked. Default: false, resource will have links. + +=item * B: If true (default), the resource will show a part count if the full part list is not displayed. If false, the resource will never show a part count. + +=item * B: If true, the resource's folder will not be clickable to open or close it. Default is false. + +=back + +=item B: Whether there is discussion on the resource, email for the user, or (lumped in here) perl errors in the execution of the problem. This is the second column in the main nav map. + +=item B: An icon for the status of a problem, with four possible states: Correct, incorrect, open, or none (not open yet, not a problem). The third column of the standard navmap. + +=item B: A text readout of the details of the current status of the problem, such as "Due in 22 hours". The fourth column of the standard navmap. + +=back + +If you add any others please be sure to document them here. + +An example of a column renderer that will show the ID number of a resource, along with the part name if any: + + sub { + my ($resource, $part, $params) = @_; + if ($part) { return '' . $resource->{ID} . ' ' . $part . ''; } + return '' . $resource->{ID} . ''; + } + +Note these functions are responsible for the TD tags, which allow them to override vertical and horizontal alignment, etc. + +=head2 Parameters + +Most of these parameters are only useful if you are *not* using the folder interface (i.e., the default first column), which is probably the common case. If you are using this interface, then you should be able to get away with just using 'cols' (to specify the columns shown), 'url' (necessary for the folders to link to the current screen correctly), and possibly 'queryString' if your app calls for it. In that case, maintaining the state of the folders will be done automatically. + +=over 4 + +=item * B: A reference to a fresh ::iterator to use from the navmaps. The rendering will reflect the options passed to the iterator, so you can use that to just render a certain part of the course, if you like. If one is not passed, the renderer will attempt to construct one from ENV{'form.filter'} and ENV{'form.condition'} information, plus the 'iterator_map' parameter if any. + +=item * B: If you are letting the renderer do the iterator handling, you can instruct the renderer to render only a particular map by passing it the source of the map you want to process, like '/res/103/jerf/navmap.course.sequence'. + +=item * B: A reference to a navmap, used only if an iterator is not passed in. If this is necessary to make an iterator but it is not passed in, a new one will be constructed based on ENV info. This is useful to do basic error checking before passing it off to render. + +=item * B: The standard Apache response object. This must be passed to the renderer or the course hash will be locked. + +=item * B: An array reference + +=item * B: A flag. If yes (default), a line for the resource itself, and a line for each part will be displayed. If not, only one line for each resource will be displayed. + +=item * B: A flag. If yes (default), if all parts of the problem have the same status and that status is Nothing Set, Correct, or Network Failure, then only one line will be displayed for that resource anyhow. If no, all parts will always be displayed. If showParts is 0, this is ignored. + +=item * B: A string identifying the URL to place the anchor 'curloc' at. Default to no anchor at all. It is the responsibility of the renderer user to ensure that the #curloc is in the URL. By default, determined through the use of the ENV{} 'jump' information, and should normally "just work" correctly. + +=item * B: A Symb identifying where to place the 'here' marker. Default empty, which means no marker. + +=item * B: A string identifying the indentation string to use. By default, this is a 25 pixel whitespace image with no alt text. + +=item * B: A string which will be prepended to the query string used when the folders are opened or closed. + +=item * B: The url the folders will link to, which should be the current page. Required if the resource info column is shown. + +=item * B: Describes the currently-open row number to cause the browser to jump to, because the user just opened that folder. By default, pulled from the Jump information in the ENV{'form.*'}. + +=item * B: If true, print the key that appears on the top of the standard navmaps. Default is false. + +=item * B: If true, print the "Close all folders" or "open all folders" links. Default is true. + +=item * B: A function that takes the resource object as its only parameter and returns a true or false value. If true, the resource is displayed. If false, it is simply skipped in the display. By default, all resources are shown. + +=item * B: If true, will not display Navigate Content resources. Default to false. + +=back + +=head2 Additional Info + +In addition to the parameters you can pass to the renderer, which will be passed through unchange to the column renderers, the renderer will generate the following information which your renderer may find useful: + +If you want to know how many rows were printed, the 'counter' element of the hash passed into the render function will contain the count. You may want to check whether any resources were printed at all. + +=over 4 + +=back + +=cut + +sub resource { return 0; } +sub communication_status { return 1; } +sub quick_status { return 2; } +sub long_status { return 3; } + +# Data for render_resource + +sub render_resource { + my ($resource, $part, $params) = @_; + + my $nonLinkedText = ''; # stuff after resource title not in link + + my $link = $params->{"resourceLink"}; + my $src = $resource->src(); + my $it = $params->{"iterator"}; + my $filter = $it->{FILTER}; + + my $title = $resource->compTitle(); + if ($src =~ /^\/uploaded\//) { + $nonLinkedText=$title; + $title = ''; + } + my $partLabel = ""; + my $newBranchText = ""; + + # If this is a new branch, label it so + if ($params->{'isNewBranch'}) { + $newBranchText = ""; + } + + # links to open and close the folder + my $linkopen = ""; + my $linkclose = ""; + + # Default icon: HTML page + my $icon = ""; + + if ($resource->is_problem()) { + if ($part eq "" || $params->{'condensed'}) { + $icon = ''; + } else { + $icon = $params->{'indentString'}; + } + } + + # Display the correct map icon to open or shut map + if ($resource->is_map()) { + my $mapId = $resource->map_pc(); + my $nowOpen = !defined($filter->{$mapId}); + if ($it->{CONDITION}) { + $nowOpen = !$nowOpen; + } + + if (!$params->{'resource_no_folder_link'}) { + $icon = 'navmap.folder.' . ($nowOpen ? 'closed' : 'open') . '.gif'; + $icon = ""; + + $linkopen = "{'queryString'} . '&filter='; + $linkopen .= ($nowOpen xor $it->{CONDITION}) ? + addToFilter($filter, $mapId) : + removeFromFilter($filter, $mapId); + $linkopen .= "&condition=" . $it->{CONDITION} . '&hereType=' + . $params->{'hereType'} . '&here=' . + &Apache::lonnet::escape($params->{'here'}) . + '&jump=' . + &Apache::lonnet::escape($resource->symb()) . + "&folderManip=1'>"; + } else { + # Don't allow users to manipulate folder + $icon = 'navmap.folder.' . ($nowOpen ? 'closed' : 'open') . + '.nomanip.gif'; + $icon = ""; + + $linkopen = ""; + $linkclose = ""; + } + } + + if ($resource->randomout()) { + $nonLinkedText .= ' (hidden) '; + } + + # We're done preparing and finally ready to start the rendering + my $result = ""; + + my $indentLevel = $params->{'indentLevel'}; + if ($newBranchText) { $indentLevel--; } + + # print indentation + for (my $i = 0; $i < $indentLevel; $i++) { + $result .= $params->{'indentString'}; + } + + # Decide what to display + $result .= "$newBranchText$linkopen$icon$linkclose"; + + my $curMarkerBegin = ''; + my $curMarkerEnd = ''; + + # Is this the current resource? + if (!$params->{'displayedHereMarker'} && + $resource->symb() eq $params->{'here'} ) { + $curMarkerBegin = '> '; + $curMarkerEnd = '<'; + $params->{'displayedHereMarker'} = 1; + } + + if ($resource->is_problem() && $part ne "" && + !$params->{'condensed'}) { + $partLabel = " (Part $part)"; + $title = ""; + } + + if ($params->{'condensed'} && $resource->countParts() > 1) { + $nonLinkedText .= ' (' . $resource->countParts() . ' parts)'; + } + + if (!$params->{'resource_nolink'}) { + $result .= " $curMarkerBegin$title$partLabel$curMarkerEnd $nonLinkedText"; + } else { + $result .= " $curMarkerBegin$title$partLabel$curMarkerEnd $nonLinkedText"; + } + + return $result; +} + +sub render_communication_status { + my ($resource, $part, $params) = @_; + my $discussionHTML = ""; my $feedbackHTML = ""; my $errorHTML = ""; + + my $link = $params->{"resourceLink"}; + my $linkopen = ""; + my $linkclose = ""; + + if ($resource->hasDiscussion()) { + $discussionHTML = $linkopen . + '' . + $linkclose; + } + + if ($resource->getFeedback()) { + my $feedback = $resource->getFeedback(); + foreach (split(/\,/, $feedback)) { + if ($_) { + $feedbackHTML .= ' ' + . ''; + } + } + } + + if ($resource->getErrors()) { + my $errors = $resource->getErrors(); + foreach (split(/,/, $errors)) { + if ($_) { + $errorHTML .= ' ' + . ''; + } + } + } + + return "$discussionHTML$feedbackHTML$errorHTML "; + +} +sub render_quick_status { + my ($resource, $part, $params) = @_; + my $result = ""; + my $firstDisplayed = !$params->{'condensed'} && + $params->{'multipart'} && $part eq "0"; + + my $link = $params->{"resourceLink"}; + my $linkopen = ""; + my $linkclose = ""; + + if ($resource->is_problem() && + !$firstDisplayed) { + my $icon = $statusIconMap{$resource->status($part)}; + my $alt = $iconAltTags{$icon}; + if ($icon) { + $result .= "$linkopen$alt$linkclose\n"; + } else { + $result .= " \n"; + } + } else { # not problem, no icon + $result .= " \n"; + } + + return $result; +} +sub render_long_status { + my ($resource, $part, $params) = @_; + my $result = "\n"; + my $firstDisplayed = !$params->{'condensed'} && + $params->{'multipart'} && $part eq "0"; + + my $color; + if ($resource->is_problem()) { + $color = $colormap{$resource->status}; + + if (dueInLessThen24Hours($resource, $part) || + lastTry($resource, $part)) { + $color = $hurryUpColor; + } + } + + if ($resource->kind() eq "res" && + $resource->is_problem() && + !$firstDisplayed) { + if ($color) {$result .= ""; } + $result .= getDescription($resource, $part); + if ($color) {$result .= ""; } + } + if ($resource->is_map() && advancedUser() && $resource->randompick()) { + $result .= '(randomly select ' . $resource->randompick() .')'; + } + + $result .= " \n"; + + return $result; +} + +my @preparedColumns = (\&render_resource, \&render_communication_status, + \&render_quick_status, \&render_long_status); + +sub setDefault { + my ($val, $default) = @_; + if (!defined($val)) { return $default; } + return $val; +} + +sub render { + my $args = shift; + &Apache::loncommon::get_unprocessed_cgi($ENV{QUERY_STRING}); + my $result = ''; + + # Configure the renderer. + my $cols = $args->{'cols'}; + if (!defined($cols)) { + # no columns, no nav maps. + return ''; + } + my $mustCloseNavMap = 0; + my $navmap; + if (defined($args->{'navmap'})) { + $navmap = $args->{'navmap'}; + } + + my $r = $args->{'r'}; + my $queryString = $args->{'queryString'}; + my $jump = $args->{'jump'}; + my $here = $args->{'here'}; + my $suppressNavmap = setDefault($args->{'suppressNavmap'}, 0); + my $currentJumpDelta = 2; # change this to change how many resources are displayed + # before the current resource when using #current + + # If we were passed 'here' information, we are not rendering + # after a folder manipulation, and we were not passed an + # iterator, make sure we open the folders to show the "here" + # marker + my $filterHash = {}; + # Figure out what we're not displaying + foreach (split(/\,/, $ENV{"form.filter"})) { + if ($_) { + $filterHash->{$_} = "1"; + } + } + + my $condition = 0; + if ($ENV{'form.condition'}) { + $condition = 1; + } + + if (!$ENV{'form.folderManip'} && !defined($args->{'iterator'})) { + # Step 1: Check to see if we have a navmap + if (!defined($navmap)) { + $navmap = Apache::lonnavmaps::navmap->new($r, + $ENV{"request.course.fn"}.".db", + $ENV{"request.course.fn"}."_parms.db", 1, 1); + $mustCloseNavMap = 1; + } + $navmap->init(); + + # Step two: Locate what kind of here marker is necessary + # Determine where the "here" marker is and where the screen jumps to. + + if ($ENV{'form.symb'}) { + $here = $jump = $ENV{'form.symb'}; + } elsif ($ENV{'form.postdata'}) { + # couldn't find a symb, is there a URL? + my $currenturl = $ENV{'form.postdata'}; + #$currenturl=~s/^http\:\/\///; + #$currenturl=~s/^[^\/]+//; + + $here = $jump = &Apache::lonnet::symbread($currenturl); + } + + # Step three: Ensure the folders are open + my $mapIterator = $navmap->getIterator(undef, undef, undef, 1); + my $depth = 1; + $mapIterator->next(); # discard the first BEGIN_MAP + my $curRes = $mapIterator->next(); + my $found = 0; + + # We only need to do this if we need to open the maps to show the + # current position. This will change the counter so we can't count + # for the jump marker with this loop. + while ($depth > 0 && !$found) { + if ($curRes == $mapIterator->BEGIN_MAP()) { $depth++; } + if ($curRes == $mapIterator->END_MAP()) { $depth--; } + + if (ref($curRes) && $curRes->symb() eq $here) { + my $mapStack = $mapIterator->getStack(); + + # Ensure the parent maps are open + for my $map (@{$mapStack}) { + if ($condition) { + undef $filterHash->{$map->map_pc()}; + } else { + $filterHash->{$map->map_pc()} = 1; + } + } + $found = 1; + } + + $curRes = $mapIterator->next(); + } + } + + if ( !defined($args->{'iterator'}) && $ENV{'form.folderManip'} ) { # we came from a user's manipulation of the nav page + # If this is a click on a folder or something, we want to preserve the "here" + # from the querystring, and get the new "jump" marker + $here = $ENV{'form.here'}; + $jump = $ENV{'form.jump'}; + } + + my $it = $args->{'iterator'}; + if (!defined($it)) { + # Construct a default iterator based on $ENV{'form.'} information + + # Step 1: Check to see if we have a navmap + if (!defined($navmap)) { + $navmap = Apache::lonnavmaps::navmap->new($r, + $ENV{"request.course.fn"}.".db", + $ENV{"request.course.fn"}."_parms.db", 1, 1); + $mustCloseNavMap = 1; + } + # Paranoia: Make sure it's ready + $navmap->init(); + + # See if we're being passed a specific map + if ($args->{'iterator_map'}) { + my $map = $args->{'iterator_map'}; + $map = $navmap->getResourceByUrl($map); + my $firstResource = $map->map_start(); + my $finishResource = $map->map_finish(); + + $args->{'iterator'} = $it = $navmap->getIterator($firstResource, $finishResource, $filterHash, $condition); + } else { + $args->{'iterator'} = $it = $navmap->getIterator(undef, undef, $filterHash, $condition); + } + } + + # (re-)Locate the jump point, if any + my $mapIterator = $navmap->getIterator(undef, undef, $filterHash, 0); + my $depth = 1; + $mapIterator->next(); + my $curRes = $mapIterator->next(); + my $foundJump = 0; + my $counter = 0; + + while ($depth > 0 && !$foundJump) { + if ($curRes == $mapIterator->BEGIN_MAP()) { $depth++; } + if ($curRes == $mapIterator->END_MAP()) { $depth--; } + if (ref($curRes)) { $counter++; } + + if (ref($curRes) && $jump eq $curRes->symb()) { + + # This is why we have to use the main iterator instead of the + # potentially faster DFS: The count has to be the same, so + # the order has to be the same, which DFS won't give us. + $args->{'currentJumpIndex'} = $counter; + $foundJump = 1; + } + + $curRes = $mapIterator->next(); + } + + my $showParts = setDefault($args->{'showParts'}, 1); + my $condenseParts = setDefault($args->{'condenseParts'}, 1); + # keeps track of when the current resource is found, + # so we can back up a few and put the anchor above the + # current resource + my $printKey = $args->{'printKey'}; + my $printCloseAll = $args->{'printCloseAll'}; + if (!defined($printCloseAll)) { $printCloseAll = 1; } + my $filterFunc = setDefault($args->{'filterFunc'}, + sub {return 1;}); + + # Print key? + if ($printKey) { + $result .= ''; + my $date=localtime; + $result.=''; + if ($navmap->{LAST_CHECK}) { + $result .= + ' New discussion since '. + strftime("%A, %b %e at %I:%M %P", localtime($navmap->{LAST_CHECK})). + ''; + } else { + $result .= ''; + } + + $result .= '
Key:    '. + ' New message (click to open)

'. + '

  '. + ' Discussions'. + '   New message (click to open)'. + '
'; + } + + if ($printCloseAll) { + if ($condition) { + $result.="Close All Folders"; + } else { + $result.="Open All Folders"; + } + $result .= "

\n"; + } + + if ($r) { + $r->print($result); + $r->rflush(); + $result = ""; + } + # End parameter setting + + # Data + $result .= '' ."\n"; + my $res = "Apache::lonnavmaps::resource"; + my %condenseStatuses = + ( $res->NETWORK_FAILURE => 1, + $res->NOTHING_SET => 1, + $res->CORRECT => 1 ); + my @backgroundColors = ("#FFFFFF", "#F6F6F6"); + + # Shared variables + $args->{'counter'} = 0; # counts the rows + $args->{'indentLevel'} = 0; + $args->{'isNewBranch'} = 0; + $args->{'condensed'} = 0; + $args->{'indentString'} = setDefault($args->{'indentString'}, ""); + $args->{'displayedHereMarker'} = 0; + + my $displayedJumpMarker = 0; + # Set up iteration. + $depth = 1; + $it->next(); # discard initial BEGIN_MAP + $curRes = $it->next(); + my $now = time(); + my $in24Hours = $now + 24 * 60 * 60; + my $rownum = 0; + + # export "here" marker information + $args->{'here'} = $here; + + while ($depth > 0) { + if ($curRes == $it->BEGIN_MAP()) { $depth++; } + if ($curRes == $it->END_MAP()) { $depth--; } + + # Maintain indentation level. + if ($curRes == $it->BEGIN_MAP() || + $curRes == $it->BEGIN_BRANCH() ) { + $args->{'indentLevel'}++; + } + if ($curRes == $it->END_MAP() || + $curRes == $it->END_BRANCH() ) { + $args->{'indentLevel'}--; + } + # Notice new branches + if ($curRes == $it->BEGIN_BRANCH()) { + $args->{'isNewBranch'} = 1; + } + + # If this isn't an actual resource, continue on + if (!ref($curRes)) { + next; + } + + $args->{'counter'}++; + + # If this has been filtered out, continue on + if (!(&$filterFunc($curRes))) { + $args->{'isNewBranch'} = 0; # Don't falsely remember this + next; + } + + # If we're suppressing navmaps and this is a navmap, continue on + if ($suppressNavmap && $curRes->src() =~ /^\/adm\/navmaps/) { + next; + } + + # Does it have multiple parts? + $args->{'multipart'} = 0; + $args->{'condensed'} = 0; + my @parts; + + # Decide what parts to show. + if ($curRes->is_problem() && $showParts) { + @parts = @{$curRes->parts()}; + $args->{'multipart'} = scalar(@parts) > 1; + + if ($condenseParts) { # do the condensation + if (!$curRes->opendate("0")) { + @parts = (); + $args->{'condensed'} = 1; + } + if (!$args->{'condensed'}) { + # Decide whether to condense based on similarity + my $status = $curRes->status($parts[1]); + my $due = $curRes->duedate($parts[1]); + my $open = $curRes->opendate($parts[1]); + my $statusAllSame = 1; + my $dueAllSame = 1; + my $openAllSame = 1; + for (my $i = 2; $i < scalar(@parts); $i++) { + if ($curRes->status($parts[$i]) != $status){ + $statusAllSame = 0; + } + if ($curRes->duedate($parts[$i]) != $due ) { + $dueAllSame = 0; + } + if ($curRes->opendate($parts[$i]) != $open) { + $openAllSame = 0; + } + } + # $*allSame is true if all the statuses were + # the same. Now, if they are all the same and + # match one of the statuses to condense, or they + # are all open with the same due date, or they are + # all OPEN_LATER with the same open date, display the + # status of the first non-zero part (to get the 'correct' + # status right, since 0 is never 'correct' or 'open'). + if (($statusAllSame && defined($condenseStatuses{$status})) || + ($dueAllSame && $status == $curRes->OPEN && $statusAllSame)|| + ($openAllSame && $status == $curRes->OPEN_LATER && $statusAllSame) ){ + @parts = (); + $args->{'condensed'} = 1; + } + + } + } + } + + # If the multipart problem was condensed, "forget" it was multipart + if (scalar(@parts) == 1) { + $args->{'multipart'} = 0; + } + + # Now, we've decided what parts to show. Loop through them and + # show them. + foreach my $part ('', @parts) { + if ($part eq '0') { + next; + } + $rownum ++; + my $backgroundColor = $backgroundColors[$rownum % scalar(@backgroundColors)]; + + $result .= " \n"; + + # Set up some data about the parts that the cols might want + my $filter = $it->{FILTER}; + my $stack = $it->getStack(); + my $src = getLinkForResource($stack); + + my $srcHasQuestion = $src =~ /\?/; + $args->{"resourceLink"} = $src. + ($srcHasQuestion?'&':'?') . + 'symb=' . &Apache::lonnet::escape($curRes->symb()); + + # Now, display each column. + foreach my $col (@$cols) { + my $colHTML = ''; + if (ref($col)) { + $colHTML .= &$col($curRes, $part, $args); + } else { + $colHTML .= &{$preparedColumns[$col]}($curRes, $part, $args); + } + + # If this is the first column and it's time to print + # the anchor, do so + if ($col == $cols->[0] && + $args->{'counter'} == $args->{'currentJumpIndex'} - + $currentJumpDelta) { + # Jam the anchor after the \n"; + $args->{'isNewBranch'} = 0; + } + + if ($r && $rownum % 20 == 0) { + $r->print($result); + $result = ""; + $r->rflush(); + } + } continue { + $curRes = $it->next(); + } + + # Print out the part that jumps to #curloc if it exists + # delay needed because the browser is processing the jump before + # it finishes rendering, so it goes to the wrong place! + # onload might be better, but this routine has no access to that. + # On mozilla, the 0-millisecond timeout seems to prevent this; + # it's quite likely this might fix other browsers, too, and + # certainly won't hurt anything. + if ($displayedJumpMarker) { + $result .= "\n"; + } + + $result .= "
tag; + # necessary for valid HTML (which Mozilla requires) + $colHTML =~ s/\>/\>\/; + $displayedJumpMarker = 1; + } + $result .= $colHTML . "\n"; + } + $result .= "
"; + + if ($r) { + $r->print($result); + $result = ""; + $r->rflush(); + } + + #if ($mustCloseNavMap) { $navmap->untieHashes(); } + + return $result; +} + 1; package Apache::lonnavmaps::navmap; =pod -lonnavmaps provides functions and objects for dealing with the compiled course hashes generated when a user enters the course, and also provides the Apache handler for the "Navigation Map" button. +lonnavmaps provides functions and objects for dealing with the compiled course hashes generated when a user enters the course, the Apache handler for the "Navigation Map" button, and a flexible prepared renderer for navigation maps that are easy to use anywhere. =head1 navmap object: Encapsulating the compiled nav map @@ -974,7 +1234,16 @@ You must obtain resource objects through =over 4 -=item * B(navHashFile, parmHashFile, genCourseAndUserOptions, genMailDiscussStatus): Binds a new navmap object to the compiled nav map hash and parm hash given as filenames. genCourseAndUserOptions is a flag saying whether the course options and user options hash should be generated. This is for when you are using the parameters of the resources that require them; see documentation in resource object documentation. genMailDiscussStatus causes the nav map to retreive information about the email and discussion status of resources. Returns the navmap object if this is successful, or B if not. You must check for undef; errors will occur when you try to use the other methods otherwise. +=item * B(navHashFile, parmHashFile, genCourseAndUserOptions, + genMailDiscussStatus): Binds a new navmap object to the compiled nav map + hash and parm hash given as filenames. genCourseAndUserOptions is a flag + saying whether the course options and user options hash should be generated. + This is for when you are using the parameters of the resources that require + them; see documentation in resource object documentation. genMailDiscussStatus + causes the nav map to retreive information about the email and discussion + status of resources. Returns the navmap object if this is successful, or + B if not. You must check for undef; errors will occur when you try + to use the other methods otherwise. =item * B(first, finish, filter, condition): See iterator documentation below. @@ -1004,6 +1273,8 @@ sub new { # tie the nav hash + my %navmaphash; + my %parmhash; if (!(tie(%navmaphash, 'GDBM_File', $self->{NAV_HASH_FILE}, &GDBM_READER(), 0640))) { return undef; @@ -1012,13 +1283,13 @@ sub new { if (!(tie(%parmhash, 'GDBM_File', $self->{PARM_HASH_FILE}, &GDBM_READER(), 0640))) { - untie $self->{PARM_HASH}; + untie %{$self->{PARM_HASH}}; return undef; } - $self->{HASH_TIED} = 1; $self->{NAV_HASH} = \%navmaphash; $self->{PARM_HASH} = \%parmhash; + $self->{INITED} = 0; bless($self); @@ -1027,6 +1298,7 @@ sub new { sub init { my $self = shift; + if ($self->{INITED}) { return; } # If the course opt hash and the user opt hash should be generated, # generate them @@ -1132,6 +1404,7 @@ sub init { } $self->{PARM_CACHE} = {}; + $self->{INITED} = 1; } # Internal function: Takes a key to look up in the nav hash and implements internal @@ -1161,15 +1434,8 @@ sub getIterator { # unties the hash when done sub untieHashes { my $self = shift; - untie %{$self->{NAV_HASH}} if ($self->{HASH_TIED}); - untie %{$self->{PARM_HASH}} if ($self->{HASH_TIED}); - $self->{HASH_TIED} = 0; -} - -# when the object is destroyed, be sure to untie all the hashes we tied. -sub DESTROY { - my $self = shift; - $self->untieHashes(); + untie %{$self->{NAV_HASH}}; + untie %{$self->{PARM_HASH}}; } # Private method: Does the given resource (as a symb string) have @@ -1226,7 +1492,9 @@ sub getById { } # resource handles inserting itself into cache. - return Apache::lonnavmaps::resource->new($self, $id); + # Not clear why the quotes are necessary, but as of this + # writing it doesn't work without them. + return "Apache::lonnavmaps::resource"->new($self, $id); } =pod @@ -1341,18 +1609,115 @@ sub parmval_real { my ($space,@qualifier)=split(/\./,$rwhat); my $qualifier=join('.',@qualifier); unless ($space eq '0') { - my ($part,$id)=split(/\_/,$space); - if ($id) { - my $partgeneral=$self->parmval($part.".$qualifier",$symb); - if (defined($partgeneral)) { return $partgeneral; } - } else { - my $resourcegeneral=$self->parmval("0.$qualifier",$symb); - if (defined($resourcegeneral)) { return $resourcegeneral; } - } + my @parts=split(/_/,$space); + my $id=pop(@parts); + my $part=join('_',@parts); + if ($part eq '') { $part='0'; } + my $partgeneral=$self->parmval($part.".$qualifier",$symb); + if (defined($partgeneral)) { return $partgeneral; } } return ''; } +=pod + +=item * B(url): Retrieves a resource object by URL of the resource. If passed a resource object, it will simply return it, so it is safe to use this method in code like "$res = $navmap->getResourceByUrl($res)", if you're not sure if $res is already an object, or just a URL. If the resource appears multiple times in the course, only the first instance will be returned. As a result, this is probably useful only for maps. + +=item * B(map, filterFunc, recursive, bailout): The map is a specification of a map to retreive the resources from, either as a url or as an object. The filterFunc is a reference to a function that takes a resource object as its one argument and returns true if the resource should be included, or false if it should not be. If recursive is true, the map will be recursively examined, otherwise it will not be. If bailout is true, the function will return as soon as it finds a resource, if false it will finish. By default, the map is the top-level map of the course, filterFunc is a function that always returns 1, recursive is true, bailout is false. The resources will be returned in a list reference containing the resource objects for the corresponding resources, with B in the list; regardless of branching, recursion, etc., it will be a flat list. + +Thus, this is suitable for cases where you don't want the structure, just a list of all resources. It is also suitable for finding out how many resources match a given description; for this use, if all you want to know is if I resources match the description, the bailout parameter will allow you to avoid potentially expensive enumeration of all matching resources. + +=item * B(map, filterFunc, recursive): Convience method for + + scalar(retrieveResources($map, $filterFunc, $recursive, 1)) > 0 + +which will tell whether the map has resources matching the description in the filter function. + +=cut + +sub getResourceByUrl { + my $self = shift; + my $resUrl = shift; + + if (ref($resUrl)) { return $resUrl; } + + $resUrl = &Apache::lonnet::clutter($resUrl); + my $resId = $self->{NAV_HASH}->{'ids_' . $resUrl}; + if ($resId =~ /,/) { + $resId = (split (/,/, $resId))[0]; + } + if (!$resId) { return ''; } + return $self->getById($resId); +} + +sub retrieveResources { + my $self = shift; + my $map = shift; + my $filterFunc = shift; + if (!defined ($filterFunc)) { + $filterFunc = sub {return 1;}; + } + my $recursive = shift; + if (!defined($recursive)) { $recursive = 1; } + my $bailout = shift; + if (!defined($bailout)) { $bailout = 0; } + + # Create the necessary iterator. + if (!ref($map)) { # assume it's a url of a map. + $map = $self->getMapByUrl($map); + } + + # Check the map's validity. + if (!$map || !$map->is_map()) { + # Oh, to throw an exception.... how I'd love that! + return (); + } + + # Get an iterator. + my $it = $self->getIterator($map->map_start(), $map->map_finish(), + !$recursive); + + my @resources = (); + + # Run down the iterator and collect the resources. + my $depth = 1; + $it->next(); + my $curRes = $it->next(); + + while ($depth > 0) { + if ($curRes == $it->BEGIN_MAP()) { + $depth++; + } + if ($curRes == $it->END_MAP()) { + $depth--; + } + + if (ref($curRes)) { + if (!&$filterFunc($curRes)) { + next; + } + + push @resources, $curRes; + + if ($bailout) { + return @resources; + } + } + + $curRes = $it->next(); + } + + return @resources; +} + +sub hasResource { + my $self = shift; + my $map = shift; + my $filterFunc = shift; + my $recursive = shift; + + return scalar($self->retrieveResources($map, $filterFunc, $recursive, 1)) > 0; +} 1; @@ -1378,7 +1743,7 @@ getIterator behaves as follows: =over 4 -=item * B(firstResource, finishResource, filterHash, condition, forceTop): All parameters are optional. firstResource is a resource reference corresponding to where the iterator should start. It defaults to navmap->firstResource() for the corresponding nav map. finishResource corresponds to where you want the iterator to end, defaulting to navmap->finishResource(). filterHash is a hash used as a set containing strings representing the resource IDs, defaulting to empty. Condition is a 1 or 0 that sets what to do with the filter hash: If a 0, then only resource that exist IN the filterHash will be recursed on. If it is a 1, only resources NOT in the filterHash will be recursed on. Defaults to 0. forceTop is a boolean value. If it is false (default), the iterator will only return the first level of map that is not just a single, 'redirecting' map. If true, the iterator will return all information, starting with the top-level map, regardless of content. +=item * B(firstResource, finishResource, filterHash, condition, forceTop, returnTopMap): All parameters are optional. firstResource is a resource reference corresponding to where the iterator should start. It defaults to navmap->firstResource() for the corresponding nav map. finishResource corresponds to where you want the iterator to end, defaulting to navmap->finishResource(). filterHash is a hash used as a set containing strings representing the resource IDs, defaulting to empty. Condition is a 1 or 0 that sets what to do with the filter hash: If a 0, then only resource that exist IN the filterHash will be recursed on. If it is a 1, only resources NOT in the filterHash will be recursed on. Defaults to 0. forceTop is a boolean value. If it is false (default), the iterator will only return the first level of map that is not just a single, 'redirecting' map. If true, the iterator will return all information, starting with the top-level map, regardless of content. returnTopMap, if true (default false), will cause the iterator to return the top-level map object (resource 0.0) before anything else. Thus, by default, only top-level resources will be shown. Change the condition to a 1 without changing the hash, and all resources will be shown. Changing the condition to 1 and including some values in the hash will allow you to selectively suppress parts of the navmap, while leaving it on 0 and adding things to the hash will allow you to selectively add parts of the nav map. See the handler code for examples. @@ -1453,6 +1818,11 @@ sub new { # Do we want to automatically follow "redirection" maps? $self->{FORCE_TOP} = shift; + # Do we want to return the top-level map object (resource 0.0)? + $self->{RETURN_0} = shift; + # have we done that yet? + $self->{HAVE_RETURNED_0} = 0; + # Now, we need to pre-process the map, by walking forward and backward # over the parts of the map we're going to look at. @@ -1566,6 +1936,13 @@ sub new { sub next { my $self = shift; + # If we want to return the top-level map object, and haven't yet, + # do so. + if ($self->{RETURN_0} && !$self->{HAVE_RETURNED_0}) { + $self->{HAVE_RETURNED_0} = 1; + return $self->{NAV_MAP}->getById('0.0'); + } + if ($self->{RECURSIVE_ITERATOR_FLAG}) { # grab the next from the recursive iterator my $next = $self->{RECURSIVE_ITERATOR}->next(); @@ -1696,7 +2073,9 @@ sub next { # If this is a blank resource, don't actually return it. # Should you ever find you need it, make sure to add an option to the code # that you can use; other things depend on this behavior. - if (!$self->{HERE}->src() || !$self->{HERE}->browsePriv()) { + my $browsePriv = $self->{HERE}->browsePriv(); + if (!$self->{HERE}->src() || + (!($browsePriv eq 'F') && !($browsePriv eq '2')) ) { return $self->next(); } @@ -1780,7 +2159,7 @@ sub new { # A hash, used as a set, of resource already seen $self->{ALREADY_SEEN} = shift; - if (!defined($self->{ALREADY_SEEN})) { $self->{ALREADY_SEEN} = {} }; + if (!defined($self->{ALREADY_SEEN})) { $self->{ALREADY_SEEN} = {} }; $self->{CONDITION} = shift; $self->{DIRECTION} = shift || FORWARD(); @@ -1903,7 +2282,7 @@ A resource object encapsulates a resourc A resource only makes sense in the context of a navmap, as some of the data is stored in the navmap object. -You will probably never need to instantiate this object directly. Use Apache::lonnavmap::navmap, and use the "start" method to obtain the starting resource. +You will probably never need to instantiate this object directly. Use Apache::lonnavmaps::navmap, and use the "start" method to obtain the starting resource. =head2 Public Members @@ -2034,8 +2413,6 @@ These methods are shortcuts to deciding =item * B: Returns true if the resource is a page. -=item * B: Returns true if the resource is a problem. - =item * B: Returns true if the resource is a sequence. =back @@ -2096,6 +2473,7 @@ These methods are useful for getting inf sub map_finish { my $self = shift; my $src = $self->src(); + $src = Apache::lonnet::clutter($src); my $res = $self->navHash("map_finish_$src", 0); $res = $self->{NAV_MAP}->getById($res); return $res; @@ -2108,6 +2486,7 @@ sub map_pc { sub map_start { my $self = shift; my $src = $self->src(); + $src = Apache::lonnet::clutter($src); my $res = $self->navHash("map_start_$src", 0); $res = $self->{NAV_MAP}->getById($res); return $res; @@ -2284,7 +2663,7 @@ sub getErrors { =pod -=item * B(): Returns a list reference containing sorted strings corresponding to each part of the problem. To count the number of parts, use the list in a scalar context, and subtract one if greater then two. (One part problems have a part 0. Multi-parts have a part 0, plus a part for each part. Filtering part 0 if you want it is up to you.) +=item * B(): Returns a list reference containing sorted strings corresponding to each part of the problem. To count the number of parts, use the list in a scalar context, and subtract one if greater than two. (One part problems have a part 0. Multi-parts have a part 0, plus a part for each part. Filtering part 0 if you want it is up to you.) =item * B(): Returns the number of parts of the problem a student can answer. Thus, for single part problems, returns 1. For multipart, it returns the number of parts in the problem, not including psuedo-part 0. Thus, B may return an array with fewer parts in it then countParts might lead you to believe. @@ -2305,42 +2684,46 @@ sub countParts { my $self = shift; my $parts = $self->parts(); + my $delta = 0; + for my $part (@$parts) { + if ($part eq '0') { $delta--; } + } if ($self->{RESOURCE_ERROR}) { return 0; } - if (scalar(@{$parts}) < 2) { return 1;} - - return scalar(@{$parts}) - 1; + return scalar(@{$parts}) + $delta; } # Private function: Extracts the parts information and saves it sub extractParts { my $self = shift; - return if ($self->{PARTS}); + return if (defined($self->{PARTS})); return if ($self->ext); $self->{PARTS} = []; # Retrieve part count, if this is a problem if ($self->is_problem()) { - my $metadata = &Apache::lonnet::metadata($self->src(), 'allpossiblekeys'); + my $metadata = &Apache::lonnet::metadata($self->src(), 'packages'); if (!$metadata) { $self->{RESOURCE_ERROR} = 1; $self->{PARTS} = []; return; } - foreach (split(/\,/,$metadata)) { - if ($_ =~ /^parameter\_(.*)\_opendate$/) { - push @{$self->{PARTS}}, $1; + if ($_ =~ /^part_(.*)$/) { + my $part = $1; + # check to see if part is turned off. + if (! Apache::loncommon::check_if_partid_hidden($part, $self->symb())) { + push @{$self->{PARTS}}, $1; + } } } - # Is this possible to do in one line? - Jeremy my @sortedParts = sort @{$self->{PARTS}}; $self->{PARTS} = \@sortedParts; }