--- loncom/interface/lonparmset.pm 2005/05/05 20:50:38 1.191 +++ loncom/interface/lonparmset.pm 2016/07/15 22:24:37 1.562 @@ -1,7 +1,7 @@ # The LearningOnline Network with CAPA # Handler to set parameters for assessments # -# $Id: lonparmset.pm,v 1.191 2005/05/05 20:50:38 albertel Exp $ +# $Id: lonparmset.pm,v 1.562 2016/07/15 22:24:37 damieng Exp $ # # Copyright Michigan State University Board of Trustees # @@ -36,7 +36,11 @@ lonparmset - Handler to set parameters f =head1 SYNOPSIS -lonparmset provides an interface to setting course parameters. +lonparmset provides an interface to setting course parameters. + +It contains all the code for the "Content and Problem Settings" UI, except +for the helpers parameter.helper and resettimes.helper, and lonhelper.pm, +and lonblockingmenu.pm. =head1 DESCRIPTION @@ -44,8 +48,266 @@ This module sets coursewide and assessme =head1 INTERNAL SUBROUTINES +=over + +=item parmval() + +Figure out a cascading parameter. + +Inputs: $what - a parameter spec (incluse part info and name I.E. 0.weight) + $id - a bighash Id number + $def - the resource's default value 'stupid emacs + +Returns: A list, the first item is the index into the remaining list of items of parm values that is the active one, the list consists of parm values at the 18 possible levels + +18 - General Course +17 - Map or Folder level in course (recursive) +16 - Map or Folder level in course (non-recursive) +15 - resource default +14 - map default +13 - resource level in course +12 - General for section +11 - Map or Folder level for section (recursive) +10 - Map or Folder level for section (non-recursive) +9 - resource level in section +8 - General for group +7 - Map or Folder level for group (recursive) +6 - Map or Folder level for group (non-recursive) +5 - resource level in group +4 - General for specific student +3 - Map or Folder level for specific student (recursive) +2 - Map or Folder level for specific student (non-recursive) +1 - resource level for specific student + +=item parmval_by_symb() + +=item reset_caches() + +=item cacheparmhash() + +=item parmhash() + +=item symbcache() + +=item preset_defaults() + +=item date_sanity_info() + +=item storeparm() + +Store a parameter by symb + + Takes + - symb + - name of parameter + - level + - new value + - new type + - username + - userdomain + +=item log_parmset() + +=item storeparm_by_symb_inner() + +=item valout() + +Format a value for output. + +Inputs: $value, $type, $editable + +Returns: $value, formatted for output. If $type indicates it is a date, +localtime($value) is returned. +$editable will return an icon to click on + +=item plink() + +Produces a link anchor. + +Inputs: $type,$dis,$value,$marker,$return,$call + +Returns: scalar with html code for a link which will envoke the +javascript function 'pjump'. + +=item page_js() + +=item startpage() + +=item print_row() + +=item print_td() + +=item print_usergroups() + +=item parm_control_group() + +=item extractResourceInformation() : + + extractResourceInformation extracts lots of information about all of the the course's resources into a variety of hashes. + +Input: See list below + +=over 4 + +=item * B : Current username + +=item * B : Domain of current user. + +=item * B : Course + +=back + +Outputs: See list below: + =over 4 +=item * B (out) : An array that will contain all of the ids in the course. + +=item * B(out) : hash, id->type, where "type" contains the extension of the file, thus, I. + +=item * B (out) : hash, id->key list, will contain a comma separated list of the meta-data keys available for the given id + +=item * B (out) : hash, name of parameter->display value (what is the display value?) + +=item * B (out) : hash, part identification->text representation of part, where the text representation is "[Part $part]" + +=item * B (out) : hash, ??? + +=item * B : ?? + +=item * B : hash, id->full sym? + +=item * B + +=item * B + +=item * B + +=item * B + +=back + +=item isdateparm() + +=item parmmenu() + +=item partmenu() + +=item usermenu() + +=item displaymenu() + +=item mapmenu() + +=item levelmenu() + +=item sectionmenu() + +=item keysplit() + +=item keysinorder() + +=item keysinorder_bytype() + +=item keysindisplayorder() + +=item standardkeyorder() + +=item assessparms() : + +Show assessment data and parameters. This is a large routine that should +be simplified and shortened... someday. + +Inputs: $r - the Apache request object. + +Returns: nothing + +Variables used (guessed by Jeremy): + +=over + +=item * B: ParameterS CATegories? ends up a list of the types of parameters that exist, e.g., tol, weight, acc, opendate, duedate, answerdate, sig, maxtries, type. + +=item * B: ParameterS PaRTs? a list of the parts of a problem that we are displaying? Used to display only selected parts? + +=item * B<@catmarker> contains list of all possible parameters including part #s + +=item * B<$fullkeyp> contains the full part/id # for the extraction of proper parameters + +=item * B<$tempkeyp> contains part 0 only (no ids - ie, subparts) + When storing information, store as part 0 + When requesting information, request from full part + +=back + +=item tablestart() + +=item tableend() + +=item extractuser() + +=item parse_listdata_key() + +=item listdata() + +=item date_interval_selector() + +=item get_date_interval_from_form() + +=item default_selector() + +=item string_selector() + +=item dateshift() + +=item newoverview() + +=item secgroup_lister() + +=item overview() + +=item clean_parameters() + +=item date_shift_one() + +=item date_shift_two() + +=item parse_key() + +=item header() + +Output html header for page + +=item print_main_menu() + +=item output_row() + +Set portfolio metadata + +=item order_meta_fields() + +=item addmetafield() + +=item setrestrictmeta() + +=item get_added_meta_fieldnames() + +=item get_deleted_meta_fieldnames() + +=item defaultsetter() + +=item components() + +=item load_parameter_names() + +=item parm_change_log() + +=item handler() : + +Main handler. Calls &assessparms subroutine. + +=back + =cut ################################################################### @@ -62,380 +324,757 @@ use GDBM_File; use Apache::lonhomework; use Apache::lonxml; use Apache::lonlocal; +use Apache::lonnavmaps; +use Apache::longroup; +use Apache::lonrss; +use HTML::Entities; +use LONCAPA qw(:DEFAULT :match); -my %courseopt; -my %useropt; -my %parmhash; - -my @ids; -my %symbp; -my %mapp; -my %typep; -my %keyp; - -my %maptitles; ################################################## +# CONTENT AND PROBLEM SETTINGS HTML PAGE HEADER/FOOTER ################################################## -=pod - -=item parmval - -Figure out a cascading parameter. - -Inputs: $what - a parameter spec (incluse part info and name I.E. 0.weight) - $id - a bighash Id number - $def - the resource's default value 'stupid emacs +# Page header +# +# @param {Apache2::RequestRec} $r - Apache request object +# @param {string} $mode - selected tab, 'parmset' for course and problem settings, or 'coursepref' for course settings +# @param {string} $crstype - course type ('Community' for community settings) +sub startSettingsScreen { + my ($r,$mode,$crstype)=@_; + + my $tabtext = &mt('Course Settings'); + if ($crstype eq 'Community') { + $tabtext = &mt('Community Settings'); + } + $r->print("\n".''."\n"); + $r->print('
'); +} -Returns: A list, the first item is the index into the remaining list of items of parm valuse that is the active one, the list consists of parm values at the 11 possible levels +# Page footer +sub endSettingsScreen { + my ($r)=@_; + $r->print('
'); +} -11 - General Course -10 - Map or Folder level in course -9- resource default -8- map default -7 - resource level in course -6 - General for section -5 - Map or Folder level for section -4 - resource level in section -3 - General for specific student -2 - Map or Folder level for specific student -1 - resource level for specific student -=cut ################################################## +# TABLE MODE +# (parmval is also used for the log of parameter changes) ################################################## + +# Calls parmval_by_symb, getting the symb from $id (the big hash resource id) with &symbcache. +# +# @param {string} $what - part info and parameter name separated by a dot, e.g. '0.weight' +# @param {string} $id - big hash resource id +# @param {string} $def - the resource's default value for this parameter +# @param {string} $uname - user name +# @param {string} $udom - user domain +# @param {string} $csec - section name +# @param {string} $cgroup - group name +# @param {hash reference} $courseopt - course parameters hash (result of lonnet::get_courseresdata, dump of course's resourcedata.db) +# @returns {Array} sub parmval { - my ($what,$id,$def,$uname,$udom,$csec)=@_; + my ($what,$id,$def,$uname,$udom,$csec,$cgroup,$courseopt)=@_; + return &parmval_by_symb($what,&symbcache($id),$def,$uname,$udom,$csec, + $cgroup,$courseopt); +} + +# Returns an array containing +# - the most specific level that is defined for that parameter (integer) +# - an array with the level as index and the parameter value as value (when defined) +# (level 1 is the most specific and will have precedence) +# +# @param {string} $what - part info and parameter name separated by a dot, e.g. '0.weight' +# @param {string} $symb - resource symb +# @param {string} $def - the resource's default value for this parameter +# @param {string} $uname - user name +# @param {string} $udom - user domain +# @param {string} $csec - section name +# @param {string} $cgroup - group name +# @param {hash reference} $courseopt - course parameters hash (result of lonnet::get_courseresdata, dump of course's resourcedata.db) +# @returns {Array} +sub parmval_by_symb { + my ($what,$symb,$def,$uname,$udom,$csec,$cgroup,$courseopt)=@_; + + my $useropt; + if ($uname ne '' && $udom ne '') { + $useropt = &Apache::lonnet::get_userresdata($uname,$udom); + } + my $result=''; my @outpar=(); # ----------------------------------------------------- Cascading lookup scheme - - my $symbparm=$symbp{$id}.'.'.$what; - my $mapparm=$mapp{$id}.'___(all).'.$what; + my $map=(&Apache::lonnet::decode_symb($symb))[0]; + $map = &Apache::lonnet::deversion($map); + + # NOTE: some of that code looks redondant with code in lonnavmaps::parmval_real, + # any change should be reflected there. + + my $symbparm=$symb.'.'.$what; + my $recurseparm=$map.'___(rec).'.$what; + my $mapparm=$map.'___(all).'.$what; + + my $grplevel=$env{'request.course.id'}.'.['.$cgroup.'].'.$what; + my $grplevelr=$env{'request.course.id'}.'.['.$cgroup.'].'.$symbparm; + my $grpleveli=$env{'request.course.id'}.'.['.$cgroup.'].'.$recurseparm; + my $grplevelm=$env{'request.course.id'}.'.['.$cgroup.'].'.$mapparm; my $seclevel=$env{'request.course.id'}.'.['.$csec.'].'.$what; my $seclevelr=$env{'request.course.id'}.'.['.$csec.'].'.$symbparm; + my $secleveli=$env{'request.course.id'}.'.['.$csec.'].'.$recurseparm; my $seclevelm=$env{'request.course.id'}.'.['.$csec.'].'.$mapparm; my $courselevel=$env{'request.course.id'}.'.'.$what; my $courselevelr=$env{'request.course.id'}.'.'.$symbparm; + my $courseleveli=$env{'request.course.id'}.'.'.$recurseparm; my $courselevelm=$env{'request.course.id'}.'.'.$mapparm; - # --------------------------------------------------------- first, check course - if (defined($courseopt{$courselevel})) { - $outpar[11]=$courseopt{$courselevel}; - $result=11; - } - - if (defined($courseopt{$courselevelm})) { - $outpar[10]=$courseopt{$courselevelm}; - $result=10; +# 18 - General Course + if (defined($$courseopt{$courselevel})) { + $outpar[18]=$$courseopt{$courselevel}; + $result=18; + } + +# 17 - Map or Folder level in course (recursive) + if (defined($$courseopt{$courseleveli})) { + $outpar[17]=$$courseopt{$courseleveli}; + $result=17; + } + +# 16 - Map or Folder level in course (non-recursive) + if (defined($$courseopt{$courselevelm})) { + $outpar[16]=$$courseopt{$courselevelm}; + $result=16; } # ------------------------------------------------------- second, check default - if (defined($def)) { $outpar[9]=$def; $result=9; } +# 15 - resource default + if (defined($def)) { $outpar[15]=$def; $result=15; } # ------------------------------------------------------ third, check map parms - my $thisparm=$parmhash{$symbparm}; - if (defined($thisparm)) { $outpar[8]=$thisparm; $result=8; } - - if (defined($courseopt{$courselevelr})) { - $outpar[7]=$courseopt{$courselevelr}; - $result=7; + +# 14 - map default + my $thisparm=&parmhash($symbparm); + if (defined($thisparm)) { $outpar[14]=$thisparm; $result=14; } + +# 13 - resource level in course + if (defined($$courseopt{$courselevelr})) { + $outpar[13]=$$courseopt{$courselevelr}; + $result=13; } # ------------------------------------------------------ fourth, back to course - if (defined($csec)) { - if (defined($courseopt{$seclevel})) { - $outpar[6]=$courseopt{$seclevel}; - $result=6; - } - if (defined($courseopt{$seclevelm})) { - $outpar[5]=$courseopt{$seclevelm}; - $result=5; - } - - if (defined($courseopt{$seclevelr})) { - $outpar[4]=$courseopt{$seclevelr}; - $result=4; - } - } - -# ---------------------------------------------------------- fifth, check user - - if (defined($uname)) { - if (defined($useropt{$courselevel})) { - $outpar[3]=$useropt{$courselevel}; - $result=3; - } - - if (defined($useropt{$courselevelm})) { - $outpar[2]=$useropt{$courselevelm}; - $result=2; - } - - if (defined($useropt{$courselevelr})) { - $outpar[1]=$useropt{$courselevelr}; - $result=1; - } + if ($csec ne '') { +# 12 - General for section + if (defined($$courseopt{$seclevel})) { + $outpar[12]=$$courseopt{$seclevel}; + $result=12; + } +# 11 - Map or Folder level for section (recursive) + if (defined($$courseopt{$secleveli})) { + $outpar[11]=$$courseopt{$secleveli}; + $result=11; + } +# 10 - Map or Folder level for section (non-recursive) + if (defined($$courseopt{$seclevelm})) { + $outpar[10]=$$courseopt{$seclevelm}; + $result=10; + } +# 9 - resource level in section + if (defined($$courseopt{$seclevelr})) { + $outpar[9]=$$courseopt{$seclevelr}; + $result=9; + } + } +# ------------------------------------------------------ fifth, check course group + if ($cgroup ne '') { +# 8 - General for group + if (defined($$courseopt{$grplevel})) { + $outpar[8]=$$courseopt{$grplevel}; + $result=8; + } +# 7 - Map or Folder level for group (recursive) + if (defined($$courseopt{$grpleveli})) { + $outpar[7]=$$courseopt{$grpleveli}; + $result=7; + } +# 6 - Map or Folder level for group (non-recursive) + if (defined($$courseopt{$grplevelm})) { + $outpar[6]=$$courseopt{$grplevelm}; + $result=6; + } +# 5 - resource level in group + if (defined($$courseopt{$grplevelr})) { + $outpar[5]=$$courseopt{$grplevelr}; + $result=5; + } + } + +# ---------------------------------------------------------- sixth, check user + + if ($uname ne '') { +# 4 - General for specific student + if (defined($$useropt{$courselevel})) { + $outpar[4]=$$useropt{$courselevel}; + $result=4; + } + +# 3 - Map or Folder level for specific student (recursive) + if (defined($$useropt{$courseleveli})) { + $outpar[3]=$$useropt{$courseleveli}; + $result=3; + } + +# 2 - Map or Folder level for specific student (non-recursive) + if (defined($$useropt{$courselevelm})) { + $outpar[2]=$$useropt{$courselevelm}; + $result=2; + } + +# 1 - resource level for specific student + if (defined($$useropt{$courselevelr})) { + $outpar[1]=$$useropt{$courselevelr}; + $result=1; + } } return ($result,@outpar); } -################################################## -################################################## + +# --- Caches local to lonparmset + + +# Reset lonparmset caches (called at the beginning and end of the handler). +sub reset_caches { + &resetparmhash(); + &resetsymbcache(); + &resetrulescache(); +} + +# cache for map parameters, stored temporarily in $env{'request.course.fn'}_parms.db +# (these parameters come from param elements in .sequence files created with the advanced RAT) +{ + my $parmhashid; # course identifier, to initialize the cache only once for a course + my %parmhash; # the parameter cache + # reset map parameter hash + sub resetparmhash { + undef($parmhashid); + undef(%parmhash); + } + + # dump the _parms.db database into %parmhash + sub cacheparmhash { + if ($parmhashid eq $env{'request.course.fn'}) { return; } + my %parmhashfile; + if (tie(%parmhashfile,'GDBM_File', + $env{'request.course.fn'}.'_parms.db',&GDBM_READER(),0640)) { + %parmhash=%parmhashfile; + untie(%parmhashfile); + $parmhashid=$env{'request.course.fn'}; + } + } + + # returns a parameter value for an identifier symb.parts.parameter, using the map parameter cache + sub parmhash { + my ($id) = @_; + &cacheparmhash(); + return $parmhash{$id}; + } +} + +# cache big hash id -> symb, using lonnavmaps to find association +{ + my $symbsid; # course identifier, to initialize the cache only once for a course + my %symbs; # hash id->symb + # reset the id->symb cache + sub resetsymbcache { + undef($symbsid); + undef(%symbs); + } + + # returns the symb corresponding to a big hash id (using lonnavmaps and a cache) + sub symbcache { + my $id=shift; + if ($symbsid ne $env{'request.course.id'}) { + undef(%symbs); + } + if (!$symbs{$id}) { + my $navmap = Apache::lonnavmaps::navmap->new(); + if ($id=~/\./) { + my $resource=$navmap->getById($id); + $symbs{$id}=$resource->symb(); + } else { + my $resource=$navmap->getByMapPc($id); + $symbs{$id}=&Apache::lonnet::declutter($resource->src()); + } + $symbsid=$env{'request.course.id'}; + } + return $symbs{$id}; + } +} + +# cache for parameter default actions (stored in parmdefactions.db) +{ + my $rulesid; # course identifier, to initialize the cache only once for a course + my %rules; # parameter default actions hash + sub resetrulescache { + undef($rulesid); + undef(%rules); + } + + # returns the value for a given key in the parameter default action hash + sub rulescache { + my $id=shift; + if ($rulesid ne $env{'request.course.id'} + && !defined($rules{$id})) { + my $dom = $env{'course.'.$env{'request.course.id'}.'.domain'}; + my $crs = $env{'course.'.$env{'request.course.id'}.'.num'}; + %rules=&Apache::lonnet::dump('parmdefactions',$dom,$crs); + $rulesid=$env{'request.course.id'}; + } + return $rules{$id}; + } +} + + +# Returns the values of the parameter type default action +# "default value when manually setting". +# If none is defined, ('','','','','') is returned. # -# Store a parameter +# @param {string} $type - parameter type +# @returns {Array} - (hours, min, sec, value) +sub preset_defaults { + my $type=shift; + if (&rulescache($type.'_action') eq 'default') { + # yes, there is something + return (&rulescache($type.'_hours'), + &rulescache($type.'_min'), + &rulescache($type.'_sec'), + &rulescache($type.'_value')); + } else { + # nothing there or something else + return ('','','','',''); + } +} + + +# Checks that a date is after enrollment start date and before +# enrollment end date. +# Returns HTML with a warning if it is not, or the empty string otherwise. +# This is used by both overview and table modes. # -# Takes -# - resource id -# - name of parameter -# - level -# - new value -# - new type -# - username -# - userdomain +# @param {integer} $checkdate - the date to check. +# @returns {string} - HTML possibly containing a localized warning message. +sub date_sanity_info { + my $checkdate=shift; + unless ($checkdate) { return ''; } + my $result=''; + my $crsprefix='course.'.$env{'request.course.id'}.'.'; + if ($env{$crsprefix.'default_enrollment_end_date'}) { + if ($checkdate>$env{$crsprefix.'default_enrollment_end_date'}) { + $result.='
' + .&mt('After course enrollment end!') + .'
'; + } + } + if ($env{$crsprefix.'default_enrollment_start_date'}) { + if ($checkdate<$env{$crsprefix.'default_enrollment_start_date'}) { + $result.='
' + .&mt('Before course enrollment start!') + .'
'; + } + } +# Preparation for additional warnings about dates in the past/future. +# An improved, more context sensitive version is recommended, +# e.g. warn for due and answer dates which are defined before the corresponding open date, etc. +# if ($checkdate'; +# } +# if ($checkdate>time) { +# $result.='
' +# .'('.&mt('in the future').')' +# .'
'; +# } + return $result; +} + +# Store a parameter value and type by ID, also triggering more parameter changes based on parameter default actions. +# +# @param {string} $sresid - resource big hash id +# @param {string} $spnam - part info and parameter name separated by a dot, e.g. '0.weight' +# @param {integer} $snum - level +# @param {string} $nval - new value +# @param {string} $ntype - new type +# @param {string} $uname - username +# @param {string} $udom - userdomain +# @param {string} $csec - section name +# @param {string} $cgroup - group name sub storeparm { - my ($sresid,$spnam,$snum,$nval,$ntype,$uname,$udom,$csec)=@_; - $spnam=~s/\_([^\_]+)$/\.$1/; + my ($sresid,$spnam,$snum,$nval,$ntype,$uname,$udom,$csec,$cgroup)=@_; + &storeparm_by_symb(&symbcache($sresid),$spnam,$snum,$nval,$ntype,$uname,$udom,$csec,'',$cgroup); +} + +my %recstack; # hash parameter name -> 1 when a parameter was used before in a recursive call to storeparm_by_symb + +# Store a parameter value and type by symb, also triggering more parameter changes based on parameter default actions. +# Uses storeparm_by_symb_inner to actually store the parameter, ignoring any returned error. +# +# @param {string} $symb - resource symb +# @param {string} $spnam - part info and parameter name separated by a dot, e.g. '0.weight' +# @param {integer} $snum - level +# @param {string} $nval - new value +# @param {string} $ntype - new type +# @param {string} $uname - username +# @param {string} $udom - userdomain +# @param {string} $csec - section name +# @param {boolean} $recflag - should be true for recursive calls to storeparm_by_symb, false otherwise +# @param {string} $cgroup - group name +sub storeparm_by_symb { + my ($symb,$spnam,$snum,$nval,$ntype,$uname,$udom,$csec,$recflag,$cgroup)=@_; + unless ($recflag) { + # first time call + %recstack=(); + $recflag=1; + } + # store parameter + &storeparm_by_symb_inner + ($symb,$spnam,$snum,$nval,$ntype,$uname,$udom,$csec,$cgroup); + # don't do anything if parameter was reset + unless ($nval) { return; } + my ($prefix,$parm)=($spnam=~/^(.*[\_\.])([^\_\.]+)$/); + # remember that this was set + $recstack{$parm}=1; + # what does this trigger? + foreach my $triggered (split(/\:/,&rulescache($parm.'_triggers'))) { + # don't backfire + unless ((!$triggered) || ($recstack{$triggered})) { + my $action=&rulescache($triggered.'_action'); + my ($whichaction,$whichparm)=($action=~/^(.*\_)([^\_]+)$/); + # set triggered parameter on same level + my $newspnam=$prefix.$triggered; + my $newvalue=''; + my $active=1; + if ($action=~/^when\_setting/) { + # are there restrictions? + if (&rulescache($triggered.'_triggervalue')=~/\w/) { + $active=0; + foreach my $possiblevalue (split(/\s*\, + \s*/,&rulescache($triggered.'_triggervalue'))) { + if (lc($possiblevalue) eq lc($nval)) { $active=1; } + } + } + $newvalue=&rulescache($triggered.'_value'); + } else { + my $totalsecs=((&rulescache($triggered.'_days')*24+&rulescache($triggered.'_hours'))*60+&rulescache($triggered.'_min'))*60+&rulescache($triggered.'_sec'); + if ($action=~/^later\_than/) { + $newvalue=$nval+$totalsecs; + } else { + $newvalue=$nval-$totalsecs; + } + } + if ($active) { + &storeparm_by_symb($symb,$newspnam,$snum,$newvalue,&rulescache($triggered.'_type'), + $uname,$udom,$csec,$recflag,$cgroup); + } + } + } + return ''; +} + +# Adds all given arguments to the course parameter log. +# @returns {string} - the answer to the lonnet query. +sub log_parmset { + return &Apache::lonnet::write_log('course','parameterlog',@_); +} + +# Store a parameter value and type by symb, without using the parameter default actions. +# Expire related sheets. +# +# @param {string} $symb - resource symb +# @param {string} $spnam - part info and parameter name separated by a dot, e.g. '0.weight' +# @param {integer} $snum - level +# @param {string} $nval - new value +# @param {string} $ntype - new type +# @param {string} $uname - username +# @param {string} $udom - userdomain +# @param {string} $csec - section name +# @param {string} $cgroup - group name +# @returns {string} - HTML code with an error message if the parameter could not be stored. +sub storeparm_by_symb_inner { +# ---------------------------------------------------------- Get symb, map, etc + my ($symb,$spnam,$snum,$nval,$ntype,$uname,$udom,$csec,$cgroup)=@_; # ---------------------------------------------------------- Construct prefixes - - my $symbparm=$symbp{$sresid}.'.'.$spnam; - my $mapparm=$mapp{$sresid}.'___(all).'.$spnam; - + $spnam=~s/\_([^\_]+)$/\.$1/; + my $map=(&Apache::lonnet::decode_symb($symb))[0]; + $map = &Apache::lonnet::deversion($map); + + my $symbparm=$symb.'.'.$spnam; + my $recurseparm=$map.'___(rec).'.$spnam; + my $mapparm=$map.'___(all).'.$spnam; + + my $grplevel=$env{'request.course.id'}.'.['.$cgroup.'].'.$spnam; + my $grplevelr=$env{'request.course.id'}.'.['.$cgroup.'].'.$symbparm; + my $grpleveli=$env{'request.course.id'}.'.['.$cgroup.'].'.$recurseparm; + my $grplevelm=$env{'request.course.id'}.'.['.$cgroup.'].'.$mapparm; + my $seclevel=$env{'request.course.id'}.'.['.$csec.'].'.$spnam; my $seclevelr=$env{'request.course.id'}.'.['.$csec.'].'.$symbparm; + my $secleveli=$env{'request.course.id'}.'.['.$csec.'].'.$recurseparm; my $seclevelm=$env{'request.course.id'}.'.['.$csec.'].'.$mapparm; - + my $courselevel=$env{'request.course.id'}.'.'.$spnam; my $courselevelr=$env{'request.course.id'}.'.'.$symbparm; + my $courseleveli=$env{'request.course.id'}.'.'.$recurseparm; my $courselevelm=$env{'request.course.id'}.'.'.$mapparm; - + my $storeunder=''; - if (($snum==11) || ($snum==3)) { $storeunder=$courselevel; } - if (($snum==10) || ($snum==2)) { $storeunder=$courselevelm; } - if (($snum==7) || ($snum==1)) { $storeunder=$courselevelr; } - if ($snum==6) { $storeunder=$seclevel; } - if ($snum==5) { $storeunder=$seclevelm; } - if ($snum==4) { $storeunder=$seclevelr; } - + if (($snum==18) || ($snum==4)) { $storeunder=$courselevel; } + if (($snum==17) || ($snum==3)) { $storeunder=$courseleveli; } + if (($snum==16) || ($snum==2)) { $storeunder=$courselevelm; } + if (($snum==13) || ($snum==1)) { $storeunder=$courselevelr; } + if ($snum==12) { $storeunder=$seclevel; } + if ($snum==11) { $storeunder=$secleveli; } + if ($snum==10) { $storeunder=$seclevelm; } + if ($snum==9) { $storeunder=$seclevelr; } + if ($snum==8) { $storeunder=$grplevel; } + if ($snum==7) { $storeunder=$grpleveli; } + if ($snum==6) { $storeunder=$grplevelm; } + if ($snum==5) { $storeunder=$grplevelr; } + + my $delete; if ($nval eq '') { $delete=1;} my %storecontent = ($storeunder => $nval, - $storeunder.'.type' => $ntype); + $storeunder.'.type' => $ntype); my $reply=''; - if ($snum>3) { + + if ($snum>4) { # ---------------------------------------------------------------- Store Course # -# Expire sheets - &Apache::lonnet::expirespread('','','studentcalc'); - if (($snum==7) || ($snum==4)) { - &Apache::lonnet::expirespread('','','assesscalc',$symbp{$sresid}); - } elsif (($snum==8) || ($snum==5)) { - &Apache::lonnet::expirespread('','','assesscalc',$mapp{$sresid}); - } else { - &Apache::lonnet::expirespread('','','assesscalc'); - } -# Store parameter - if ($delete) { - $reply=&Apache::lonnet::del - ('resourcedata',[keys(%storecontent)], - $env{'course.'.$env{'request.course.id'}.'.domain'}, - $env{'course.'.$env{'request.course.id'}.'.num'}); - } else { - $reply=&Apache::lonnet::cput - ('resourcedata',\%storecontent, - $env{'course.'.$env{'request.course.id'}.'.domain'}, - $env{'course.'.$env{'request.course.id'}.'.num'}); - } + my $cnum = $env{'course.'.$env{'request.course.id'}.'.num'}; + my $cdom = $env{'course.'.$env{'request.course.id'}.'.domain'}; + # Expire sheets + &Apache::lonnet::expirespread('','','studentcalc'); + if (($snum==13) || ($snum==9) || ($snum==5)) { + &Apache::lonnet::expirespread('','','assesscalc',$symb); + } elsif (($snum==14) || ($snum==10) || ($snum==6)) { + &Apache::lonnet::expirespread('','','assesscalc',$map); + } else { + &Apache::lonnet::expirespread('','','assesscalc'); + } + # Store parameter + if ($delete) { + $reply=&Apache::lonnet::del + ('resourcedata',[keys(%storecontent)],$cdom,$cnum); + &log_parmset(\%storecontent,1); + } else { + $reply=&Apache::lonnet::cput + ('resourcedata',\%storecontent,$cdom,$cnum); + &log_parmset(\%storecontent); + } + &Apache::lonnet::devalidatecourseresdata($cnum,$cdom); } else { # ------------------------------------------------------------------ Store User # -# Expire sheets - &Apache::lonnet::expirespread($uname,$udom,'studentcalc'); - if ($snum==1) { - &Apache::lonnet::expirespread - ($uname,$udom,'assesscalc',$symbp{$sresid}); - } elsif ($snum==2) { - &Apache::lonnet::expirespread - ($uname,$udom,'assesscalc',$mapp{$sresid}); - } else { - &Apache::lonnet::expirespread($uname,$udom,'assesscalc'); - } -# Store parameter - if ($delete) { - $reply=&Apache::lonnet::del - ('resourcedata',[keys(%storecontent)],$udom,$uname); - } else { - $reply=&Apache::lonnet::cput - ('resourcedata',\%storecontent,$udom,$uname); - } - &Apache::lonnet::devalidateuserresdata($uname,$udom); + # Expire sheets + &Apache::lonnet::expirespread($uname,$udom,'studentcalc'); + if ($snum==1) { + &Apache::lonnet::expirespread + ($uname,$udom,'assesscalc',$symb); + } elsif ($snum==2) { + &Apache::lonnet::expirespread + ($uname,$udom,'assesscalc',$map); + } else { + &Apache::lonnet::expirespread($uname,$udom,'assesscalc'); + } + # Store parameter + if ($delete) { + $reply=&Apache::lonnet::del + ('resourcedata',[keys(%storecontent)],$udom,$uname); + &log_parmset(\%storecontent,1,$uname,$udom); + } else { + $reply=&Apache::lonnet::cput + ('resourcedata',\%storecontent,$udom,$uname); + &log_parmset(\%storecontent,0,$uname,$udom); + } + &Apache::lonnet::devalidateuserresdata($uname,$udom); } - + if ($reply=~/^error\:(.*)/) { - return "Write Error: $1"; + return "Write Error: $1"; } return ''; } -################################################## -################################################## -=pod - -=item valout - -Format a value for output. - -Inputs: $value, $type - -Returns: $value, formatted for output. If $type indicates it is a date, -localtime($value) is returned. - -=cut - -################################################## -################################################## +# Returns HTML with the value of the given parameter, +# using a readable format for dates, and +# a warning if there is a problem with a date. +# Used by table mode. +# Returns HTML for the editmap.png image if no value is defined and $editable is true. +# +# @param {string} $value - the parameter value +# @param {string} $type - the parameter type +# @param {string} $name - the parameter name (unused) +# @param {boolean} $editable - Set to true to get an icon when no value is defined. sub valout { - my ($value,$type)=@_; + my ($value,$type,$name,$editable)=@_; my $result = ''; # Values of zero are valid. if (! $value && $value ne '0') { - $result = '  '; + if ($editable) { + $result = + ''.&mt('Change').''; + } else { + $result=' '; + } } else { if ($type eq 'date_interval') { - my ($sec,$min,$hour,$mday,$mon,$year)=gmtime($value); + my ($totalsecs,$donesuffix) = split(/_/,$value,2); + my ($usesdone,$donebuttontext,$proctor,$secretkey); + if ($donesuffix =~ /^done\:([^\:]+)\:(.*)$/) { + $donebuttontext = $1; + (undef,$proctor,$secretkey) = split(/_/,$2); + $usesdone = 'done'; + } elsif ($donesuffix =~ /^done(|_.+)$/) { + $donebuttontext = &mt('Done'); + ($usesdone,$proctor,$secretkey) = split(/_/,$donesuffix); + } + my ($sec,$min,$hour,$mday,$mon,$year)=gmtime($totalsecs); + my @timer; $year=$year-70; $mday--; if ($year) { - $result.=$year.' yrs '; +# $result.=&mt('[quant,_1,yr]',$year).' '; + push(@timer,&mt('[quant,_1,yr]',$year)); } if ($mon) { - $result.=$mon.' mths '; +# $result.=&mt('[quant,_1,mth]',$mon).' '; + push(@timer,&mt('[quant,_1,mth]',$mon)); } if ($mday) { - $result.=$mday.' days '; +# $result.=&mt('[quant,_1,day]',$mday).' '; + push(@timer,&mt('[quant,_1,day]',$mday)); } if ($hour) { - $result.=$hour.' hrs '; +# $result.=&mt('[quant,_1,hr]',$hour).' '; + push(@timer,&mt('[quant,_1,hr]',$hour)); } if ($min) { - $result.=$min.' mins '; +# $result.=&mt('[quant,_1,min]',$min).' '; + push(@timer,&mt('[quant,_1,min]',$min)); } if ($sec) { - $result.=$sec.' secs '; +# $result.=&mt('[quant,_1,sec]',$sec).' '; + push(@timer,&mt('[quant,_1,sec]',$sec)); + } +# $result=~s/\s+$//; + if (!@timer) { # Special case: all entries 0 -> display "0 secs" intead of empty field to keep this field editable + push(@timer,&mt('[quant,_1,sec]',0)); } - $result=~s/\s+$//; - } elsif ($type=~/^date/) { - $result = localtime($value); + $result.=join(", ",@timer); + if ($usesdone eq 'done') { + if ($secretkey) { + $result .= ' '.&mt('+ "[_1]" with proctor key: [_2]',$donebuttontext,$secretkey); + } else { + $result .= ' + "'.$donebuttontext.'"'; + } + } + } elsif (&isdateparm($type)) { + $result = &Apache::lonlocal::locallocaltime($value). + &date_sanity_info($value); } else { $result = $value; + $result=~s/\,/\, /gs; + $result = &HTML::Entities::encode($result,'"<>&'); } } return $result; } -################################################## -################################################## - -=pod - -=item plink - -Produces a link anchor. - -Inputs: $type,$dis,$value,$marker,$return,$call - -Returns: scalar with html code for a link which will envoke the -javascript function 'pjump'. - -=cut -################################################## -################################################## +# Returns HTML containing a link on a parameter value, for table mode. +# The link uses the javascript function 'pjump'. +# +# @param {string} $type - parameter type +# @param {string} $dis - dialog title for editing the parameter value and type +# @param {string} $value - parameter value +# @param {string} $marker - identifier for the parameter, "resource id&part_parameter name&level", will be passed as pres_marker when the user submits a change. +# @param {string} $return - prefix for the name of the form and field names that will be used to submit the form ('parmform.pres') +# @param {string} $call - javascript function to call to submit the form ('psub') sub plink { my ($type,$dis,$value,$marker,$return,$call)=@_; my $winvalue=$value; unless ($winvalue) { - if ($type=~/^date/) { + if (&isdateparm($type)) { $winvalue=$env{'form.recent_'.$type}; } else { $winvalue=$env{'form.recent_'.(split(/\_/,$type))[0]}; } } - return - ''. - &valout($value,$type).''; + my ($parmname)=((split(/\&/,$marker))[1]=~/\_([^\_]+)$/); + my ($hour,$min,$sec,$val)=&preset_defaults($parmname); + unless (defined($winvalue)) { $winvalue=$val; } + my $valout = &valout($value,$type,$parmname,1); + my $unencmarker = $marker; + foreach my $item (\$type, \$dis, \$winvalue, \$marker, \$return, \$call, + \$hour, \$min, \$sec) { + $$item = &HTML::Entities::encode($$item,'"<>&'); + $$item =~ s/\'/\\\'/g; + } + return '
'. + ''. + $valout.'
'; } +# Javascript for table mode. +sub page_js { -sub startpage { - my ($r,$id,$udom,$csec,$uname,$have_assesments,$trimheader)=@_; - - my $bodytag=&Apache::loncommon::bodytag('Set/Modify Course Parameters','', - 'onUnload="pclose()"'); - my $chooseopt=&Apache::loncommon::select_dom_form($udom,'udom').' '. - &Apache::loncommon::selectstudent_link('parmform','uname','udom'); my $selscript=&Apache::loncommon::studentbrowser_javascript(); my $pjump_def = &Apache::lonhtmlcommon::pjump_javascript_definition(); - my %lt=&Apache::lonlocal::texthash( - 'cep' => "Course Environment Parameters", - 'scep' => "Set Course Environment Parameters", - 'smcap' => "Set/Modify Course Assessment Parameter", - 'mcap' => "Modify Course Assessment Parameters", - 'caphm' => "Course Assessment Parameter - Helper Mode", - 'capom' => "Course Assessment Parameters - Overview Mode", - 'captm' => "Course Assessments Parameters - Table Mode", - 'sg' => "Section/Group", - 'fu' => "For User", - 'oi' => "or ID", - 'ad' => "at Domain" - ); - my $overallhelp= - &Apache::loncommon::help_open_menu('','Setting Parameters','Course_Setting_Parameters','',10,'Instructor Interface'); - my $assessparmhelp=&Apache::loncommon::help_open_topic("Cascading_Parameters","Assessment Parameters"); - my $html=&Apache::lonxml::xmlbegin(); - $r->print(< -LON-CAPA Course Parameters - $selscript - -$bodytag -$overallhelp -ENDHEAD +ENDJS + +} + +# Javascript to show or hide the map selection (function showHide_courseContent), +# for table and overview modes. +sub showhide_js { + return <<"COURSECONTENTSCRIPT"; + +function showHide_courseContent() { + var parmlevValue=document.getElementById("parmlev").value; + if (parmlevValue == 'general') { + document.getElementById('mapmenu').style.display="none"; + } else { + if ((parmlevValue == "full") || (parmlevValue == "map")) { + document.getElementById('mapmenu').style.display =""; + } else { + document.getElementById('mapmenu').style.display="none"; + } + } + return; +} + +COURSECONTENTSCRIPT +} - unless ($trimheader) {$r->print(< -

$lt{'cep'}

- - -
-$assessparmhelp -
-

$lt{'caphm'}

- -
-
-
-

$lt{'capom'}

- -
-
-ENDHEAD2 +# Javascript functions showHideLenient and toggleParmTextbox, for overview mode +sub toggleparmtextbox_js { + return <<"ENDSCRIPT"; + +if (!document.getElementsByClassName) { + function getElementsByClassName(node, classname) { + var a = []; + var re = new RegExp('(^| )'+classname+'( |$)'); + var els = node.getElementsByTagName("*"); + for(var i=0,j=els.length; i'; - foreach ('',sort keys %sectionhash) { - $sections.=''; +} + +function showHideLenient() { + var lenients; + var setRegExp = /^set_/; + if (document.getElementsByClassName) { + lenients = document.getElementsByClassName('LC_lenient_radio'); + } else { + lenients = getElementsByClassName(document.body,'LC_lenient_radio'); + } + if (lenients != 'undefined') { + for (var i=0; iprint(< -

$lt{'captm'}

-ENDHEAD3 - - if (!$have_assesments) { - $r->print(''.&mt('There are no assesment parameters in this course to set.').'
'); - } else { - $r->print(< -$sections -
-$lt{'fu'} - -$lt{'oi'} - -$lt{'ad'} -$chooseopt - - - - -ENDHEAD } + return; } +function toggleParmTextbox(form,key) { + var divfortext = document.getElementById('LC_parmtext_'+key); + if (divfortext) { + var caller = form.elements['set_'+key]; + if (caller.length) { + for (i=0; i$remove'); + }); + + \$(wrapper).delegate(".LC_remove_ipacc","click", function(e){ + e.preventDefault(); \$(this).closest("div").remove(); + }) +}); + + +END +} + +# Javascript function toggleSecret, for overview mode. +sub done_proctor_js { + return <<"END"; +function toggleSecret(form,radio,key) { + var radios = form[radio+key]; + if (radios.length) { + for (var i=0; i "group_or_section('cgroup')", + ); + if (!$psymb) { + $loaditems{'onload'} = "showHide_courseContent(); group_or_section('cgroup'); resize_scrollbox('mapmenuscroll','1','1');"; + } + + if ((($env{'form.command'} eq 'set') && ($env{'form.url'}) && + (!$env{'form.dis'})) || ($env{'form.symb'})) { + &Apache::lonhtmlcommon::add_breadcrumb({help=>'Problem_Parameters', + text=>"Problem Parameters"}); + } else { + &Apache::lonhtmlcommon::add_breadcrumb({href=>'/adm/parmset?action=settable', + text=>"Table Mode", + help => 'Course_Setting_Parameters'}); + } + my $js = &page_js().' + +'; + my $start_page = + &Apache::loncommon::start_page('Set/Modify Course Parameters',$js, + {'add_entries' => \%loaditems,}); + my $breadcrumbs = + &Apache::lonhtmlcommon::breadcrumbs('Table Mode Parameter Setting','Table_Mode'); + my $escfilter=&Apache::lonhtmlcommon::entity_encode($env{'form.filter'}); + my $escpart=&Apache::lonhtmlcommon::entity_encode($env{'form.part'}); + $r->print($start_page.$breadcrumbs); + &startSettingsScreen($r,'parmset',$crstype); + $r->print(< + + + + + + +ENDHEAD +} + + +# Prints a row for table mode (except for the tr start). +# Every time a hash reference is passed, a single entry is used, so print_row +# could just use these values, but why make it simple when it can be complicated ? +# +# @param {Apache2::RequestRec} $r - the Apache request +# @param {string} $which - parameter key ('parameter_'.part.'_'.name) +# @param {hash reference} $part - parameter key -> parameter part (can be problem part.'_'.response id for response parameters) +# @param {hash reference} $name - parameter key -> parameter name +# @param {hash reference} $symbp - resource id -> symb +# @param {string} $rid - resource id +# @param {hash reference} $default - parameter key -> resource parameter default value +# @param {hash reference} $defaulttype - parameter key -> resource parameter default type +# @param {hash reference} $display - parameter key -> full title for the parameter +# @param {string} $defbgone - user level and other levels background color +# @param {string} $defbgtwo - section level background color, also used for part number +# @param {string} $defbgthree - group level background color +# @param {string} $parmlev - parameter level (Resource:'full', Map:'map', Course:'general') +# @param {string} $uname - user name +# @param {string} $udom - user domain +# @param {string} $csec - section name +# @param {string} $cgroup - group name +# @param {array reference} $usersgroups - list of groups the user belongs to, if any +# @param {boolean} $noeditgrp - true if no edit is allowed for group level parameters sub print_row { - my ($r,$which,$part,$name,$rid,$default,$defaulttype,$display,$defbgone, - $defbgtwo,$parmlev,$uname,$udom,$csec)=@_; -# get the values for the parameter in cascading order -# empty levels will remain empty + my ($r,$which,$part,$name,$symbp,$rid,$default,$defaulttype,$display,$defbgone, + $defbgtwo,$defbgthree,$parmlev,$uname,$udom,$csec,$cgroup,$usersgroups,$noeditgrp)=@_; + my $cnum = $env{'course.'.$env{'request.course.id'}.'.num'}; + my $cdom = $env{'course.'.$env{'request.course.id'}.'.domain'}; + my $courseopt=&Apache::lonnet::get_courseresdata($cnum,$cdom); + + # get the values for the parameter in cascading order + # empty levels will remain empty my ($result,@outpar)=&parmval($$part{$which}.'.'.$$name{$which}, - $rid,$$default{$which},$uname,$udom,$csec); -# get the type for the parameters -# problem: these may not be set for all levels + $rid,$$default{$which},$uname,$udom,$csec,$cgroup,$courseopt); + # get the type for the parameters + # problem: these may not be set for all levels my ($typeresult,@typeoutpar)=&parmval($$part{$which}.'.'. - $$name{$which}.'.type', - $rid,$$defaulttype{$which},$uname,$udom,$csec); -# cascade down manually + $$name{$which}.'.type',$rid, + $$defaulttype{$which},$uname,$udom,$csec,$cgroup,$courseopt); + # cascade down manually my $cascadetype=$$defaulttype{$which}; - for (my $i=11;$i>0;$i--) { - if ($typeoutpar[$i]) { + for (my $i=18;$i>0;$i--) { + if ($typeoutpar[$i]) { $cascadetype=$typeoutpar[$i]; - } else { + } else { $typeoutpar[$i]=$cascadetype; } } my $parm=$$display{$which}; - if ($parmlev eq 'full' || $parmlev eq 'brief') { - $r->print('' - .$$part{$which}.''); - } else { + if ($parmlev eq 'full') { + $r->print('' + .($$part{$which} eq '0'?'0 ('.&mt('default').')':$$part{$which}).''); + } else { $parm=~s|\[.*\]\s||g; } + my $automatic=&rulescache(($which=~/\_([^\_]+)$/)[0].'_triggers'); + if ($automatic) { + $parm.='
'.&mt('Automatically sets').' '.join(', ',split(/\:/,$automatic)).'
'; + } + $r->print(''.$parm.''); - $r->print(''.$parm.''); - my $thismarker=$which; $thismarker=~s/^parameter\_//; my $mprefix=$rid.'&'.$thismarker.'&'; + my $effective_parm = &valout($outpar[$result],$typeoutpar[$result],$thismarker); + my ($othergrp,$grp_parm,$controlgrp); if ($parmlev eq 'general') { - if ($uname) { - &print_td($r,3,$defbgone,$result,\@outpar,$mprefix,$_,\@typeoutpar,$display); + &print_td($r,4,$defbgone,$result,\@outpar,$mprefix,$which,\@typeoutpar,$display); + } elsif ($cgroup) { + &print_td($r,8,$defbgthree,$result,\@outpar,$mprefix,$which,\@typeoutpar,$display,$noeditgrp); } elsif ($csec) { - &print_td($r,6,$defbgtwo,$result,\@outpar,$mprefix,$_,\@typeoutpar,$display); + &print_td($r,12,$defbgtwo,$result,\@outpar,$mprefix,$which,\@typeoutpar,$display); } else { - &print_td($r,11,$defbgone,$result,\@outpar,$mprefix,$_,\@typeoutpar,$display); + &print_td($r,18,$defbgone,$result,\@outpar,$mprefix,$which,\@typeoutpar,$display); } } elsif ($parmlev eq 'map') { - if ($uname) { - &print_td($r,2,$defbgone,$result,\@outpar,$mprefix,$_,\@typeoutpar,$display); + &print_td($r,3,$defbgone,$result,\@outpar,$mprefix,$which,\@typeoutpar,$display); + &print_td($r,2,$defbgone,$result,\@outpar,$mprefix,$which,\@typeoutpar,$display); + } elsif ($cgroup) { + &print_td($r,7,$defbgthree,$result,\@outpar,$mprefix,$which,\@typeoutpar,$display,$noeditgrp); + &print_td($r,6,$defbgthree,$result,\@outpar,$mprefix,$which,\@typeoutpar,$display,$noeditgrp); } elsif ($csec) { - &print_td($r,5,$defbgtwo,$result,\@outpar,$mprefix,$_,\@typeoutpar,$display); + &print_td($r,11,$defbgtwo,$result,\@outpar,$mprefix,$which,\@typeoutpar,$display); + &print_td($r,10,$defbgtwo,$result,\@outpar,$mprefix,$which,\@typeoutpar,$display); } else { - &print_td($r,10,$defbgone,$result,\@outpar,$mprefix,$_,\@typeoutpar,$display); + &print_td($r,17,$defbgone,$result,\@outpar,$mprefix,$which,\@typeoutpar,$display); + &print_td($r,16,$defbgone,$result,\@outpar,$mprefix,$which,\@typeoutpar,$display); } } else { + if ($uname) { + if (@{$usersgroups} > 1) { + my ($coursereply,$grp_parm,$controlgrp); + ($coursereply,$othergrp,$grp_parm,$controlgrp) = + &print_usergroups($r,$$part{$which}.'.'.$$name{$which}, + $rid,$cgroup,$defbgone,$usersgroups,$result,$courseopt); + if ($coursereply && $result > 4) { + if (defined($controlgrp)) { + if ($cgroup ne $controlgrp) { + $effective_parm = $grp_parm; + $result = 0; + } + } + } + } + } - &print_td($r,11,$defbgone,$result,\@outpar,$mprefix,$_,\@typeoutpar,$display); - - if ($parmlev eq 'brief') { - - &print_td($r,7,$defbgone,$result,\@outpar,$mprefix,$_,\@typeoutpar,$display); + &print_td($r,18,$defbgone,$result,\@outpar,$mprefix,$which,\@typeoutpar,$display); + &print_td($r,17,$defbgone,$result,\@outpar,$mprefix,$which,\@typeoutpar,$display); + &print_td($r,16,$defbgone,$result,\@outpar,$mprefix,$which,\@typeoutpar,$display); + &print_td($r,15,'#FFDDDD',$result,\@outpar,$mprefix,$which,\@typeoutpar,$display); + &print_td($r,14,'#FFDDDD',$result,\@outpar,$mprefix,$which,\@typeoutpar,$display); + &print_td($r,13,$defbgone,$result,\@outpar,$mprefix,$which,\@typeoutpar,$display); + + if ($csec) { + &print_td($r,12,$defbgtwo,$result,\@outpar,$mprefix,$which,\@typeoutpar,$display); + &print_td($r,11,$defbgtwo,$result,\@outpar,$mprefix,$which,\@typeoutpar,$display); + &print_td($r,10,$defbgtwo,$result,\@outpar,$mprefix,$which,\@typeoutpar,$display); + &print_td($r,9,$defbgtwo,$result,\@outpar,$mprefix,$which,\@typeoutpar,$display); + } - if ($csec) { - &print_td($r,4,$defbgtwo,$result,\@outpar,$mprefix,$_,\@typeoutpar,$display); - } - if ($uname) { - &print_td($r,1,$defbgone,$result,\@outpar,$mprefix,$_,\@typeoutpar,$display); - } - } else { + if ($cgroup) { + &print_td($r,8,$defbgthree,$result,\@outpar,$mprefix,$which,\@typeoutpar,$display,$noeditgrp); + &print_td($r,7,$defbgthree,$result,\@outpar,$mprefix,$which,\@typeoutpar,$display,$noeditgrp); + &print_td($r,6,$defbgthree,$result,\@outpar,$mprefix,$which,\@typeoutpar,$display,$noeditgrp); + &print_td($r,5,$defbgthree,$result,\@outpar,$mprefix,$which,\@typeoutpar,$display,$noeditgrp); + } - &print_td($r,10,$defbgone,$result,\@outpar,$mprefix,$_,\@typeoutpar,$display); - &print_td($r,9,'#FFDDDD',$result,\@outpar,$mprefix,$_,\@typeoutpar,$display); - &print_td($r,8,'#FFDDDD',$result,\@outpar,$mprefix,$_,\@typeoutpar,$display); - &print_td($r,7,$defbgone,$result,\@outpar,$mprefix,$_,\@typeoutpar,$display); + if ($uname) { + if ($othergrp) { + $r->print($othergrp); + } + &print_td($r,4,$defbgone,$result,\@outpar,$mprefix,$which,\@typeoutpar,$display); + &print_td($r,3,$defbgone,$result,\@outpar,$mprefix,$which,\@typeoutpar,$display); + &print_td($r,2,$defbgone,$result,\@outpar,$mprefix,$which,\@typeoutpar,$display); + &print_td($r,1,$defbgone,$result,\@outpar,$mprefix,$which,\@typeoutpar,$display); + } - if ($csec) { - &print_td($r,6,$defbgtwo,$result,\@outpar,$mprefix,$_,\@typeoutpar,$display); - &print_td($r,5,$defbgtwo,$result,\@outpar,$mprefix,$_,\@typeoutpar,$display); - &print_td($r,4,$defbgtwo,$result,\@outpar,$mprefix,$_,\@typeoutpar,$display); - } - if ($uname) { - &print_td($r,3,$defbgone,$result,\@outpar,$mprefix,$_,\@typeoutpar,$display); - &print_td($r,2,$defbgone,$result,\@outpar,$mprefix,$_,\@typeoutpar,$display); - &print_td($r,1,$defbgone,$result,\@outpar,$mprefix,$_,\@typeoutpar,$display); - } - } # end of $brief if/else } # end of $parmlev if/else + $r->print(''.$effective_parm.''); - $r->print(''. - &valout($outpar[$result],$typeoutpar[$result]).''); - - if ($parmlev eq 'full' || $parmlev eq 'brief') { + if ($parmlev eq 'full') { my $sessionval=&Apache::lonnet::EXT('resource.'.$$part{$which}. - '.'.$$name{$which},$symbp{$rid}); - -# this doesn't seem to work, and I don't think is correct -# my $sessionvaltype=&Apache::lonnet::EXT('resource.'.$$part{$which}. -# '.'.$$name{$which}.'.type',$symbp{$rid}); -# this seems to work + '.'.$$name{$which},$$symbp{$rid}); my $sessionvaltype=$typeoutpar[$result]; - if (!defined($sessionvaltype)) { $sessionvaltype=$$defaulttype{$which}; } - $r->print(''. - &valout($sessionval,$sessionvaltype).' '. + if (!defined($sessionvaltype)) { + $sessionvaltype=$$defaulttype{$which}; + } + $r->print(''. + &valout($sessionval,$sessionvaltype,$$name{$which}).' '. ''); } $r->print(''); $r->print("\n"); } +# Prints a cell for table mode. +# +# FIXME: some of these parameter names are uninspired ($which and $value) +# Also, it would make more sense to pass the display for this cell rather +# than the full display hash and the key to use. +# +# @param {Apache2::RequestRec} $r - the Apache request +# @param {integer} $which - level +# @param {string} $defbg - cell background color +# @param {integer} $result - the most specific level that is defined for that parameter +# @param {array reference} $outpar - array level -> parameter value (when defined) +# @param {string} $mprefix - resource id.'&'.part.'_'.parameter name.'&' +# @param {string} $value - parameter key ('parameter_'.part.'_'.name) +# @param {array reference} $typeoutpar - array level -> parameter type (when defined) +# @param {hash reference} $display - parameter key -> full title for the parameter +# @param {boolean} $noeditgrp - true if no edit is allowed for group level parameters sub print_td { - my ($r,$which,$defbg,$result,$outpar,$mprefix,$value,$typeoutpar,$display)=@_; - $r->print(''); - if ($which<8 || $which > 9) { - $r->print(&plink($$typeoutpar[$which], - $$display{$value},$$outpar[$which], - $mprefix."$which",'parmform.pres','psub')); + my ($r,$which,$defbg,$result,$outpar,$mprefix,$value,$typeoutpar,$display,$noeditgrp)=@_; + $r->print(''); + my $nolink = 0; + if ($which == 14 || $which == 15) { + $nolink = 1; + } elsif (($env{'request.course.sec'} ne '') && ($which > 12)) { + $nolink = 1; + } elsif ($which == 5 || $which == 6 || $which == 7 || $which == 8) { + if ($noeditgrp) { + $nolink = 1; + } + } elsif ($mprefix =~ /availablestudent\&$/) { + if ($which > 4) { + $nolink = 1; + } + } elsif ($mprefix =~ /examcode\&$/) { + unless ($which == 2) { + $nolink = 1; + } + } + if ($nolink) { + $r->print(&valout($$outpar[$which],$$typeoutpar[$which],$mprefix)); +# FIXME: probably a good thing that mprefix is not used in valout, because it does not look like a parameter name ! } else { - $r->print(&valout($$outpar[$which],$$typeoutpar[$which])); + $r->print(&plink($$typeoutpar[$which], + $$display{$value},$$outpar[$which], + $mprefix."$which",'parmform.pres','psub')); } $r->print(''."\n"); } -=pod +# FIXME: Despite the name, this does not print anything, the $r parameter is unused. +# Returns HTML and other info for the cell added when a user is selected +# and that user is in several groups. This is the cell with the title "Control by other group". +# +# @param {Apache2::RequestRec} $r - the Apache request (unused) +# @param {string} $what - parameter part.'.'.parameter name +# @param {string} $rid - resource id +# @param {string} $cgroup - group name +# @param {string} $defbg - cell background color +# @param {array reference} $usersgroups - list of groups the user belongs to, if any +# @param {integer} $result - level +# @param {hash reference} $courseopt - course parameters hash (result of lonnet::get_courseresdata, dump of course's resourcedata.db) +# @returns {Array} - array (parameter value for the other group, HTML for the cell, HTML with the value, name of the other group) +sub print_usergroups { + my ($r,$what,$rid,$cgroup,$defbg,$usersgroups,$result,$courseopt) = @_; + my $courseid = $env{'request.course.id'}; + my $output; + my $symb = &symbcache($rid); + my $symbparm=$symb.'.'.$what; + my $map=(&Apache::lonnet::decode_symb($symb))[0]; + my $recurseparm=$map.'___(rec).'.$what; + my $mapparm=$map.'___(all).'.$what; + my ($coursereply,$resultitem,$resultgroup,$resultlevel,$resulttype) = + &parm_control_group($courseid,$usersgroups,$symbparm,$mapparm, + $recurseparm,$what,$courseopt); + my $bgcolor = $defbg; + my $grp_parm; + if (($coursereply) && ($cgroup ne $resultgroup)) { + if ($result > 3) { + $bgcolor = '#AAFFAA'; + $grp_parm = &valout($coursereply,$resulttype,$what); + } + $grp_parm = &valout($coursereply,$resulttype,$what); + $output = ''; + if ($resultgroup && $resultlevel) { + $output .= ''.$resultgroup.' ('.$resultlevel.'): '.$grp_parm; + } else { + $output .= ' '; + } + $output .= ''; + } else { + $output .= ' '; + } + return ($coursereply,$output,$grp_parm,$resultgroup); +} -=item B: Given the course data hash, extractResourceInformation extracts lots of information about the course's resources into a variety of hashes. +# Looks for a group with a defined parameter for given user and parameter. +# Used by print_usergroups. +# +# @param {string} $courseid - the course id +# @param {array reference} $usersgroups - list of groups the user belongs to, if any +# @param {string} $symbparm - end of the course parameter hash key for the group resource level +# @param {string} $mapparm - end of the course parameter hash key for the group map/folder level +# @param {string} $recurseparm - end of the course parameter hash key for the group recursive level +# @param {string} $what - parameter part.'.'.parameter name +# @param {hash reference} $courseopt - course parameters hash +# @returns {Array} - (parameter value for the group, course parameter hash key for the parameter, name of the group, level name, parameter type) +sub parm_control_group { + my ($courseid,$usersgroups,$symbparm,$mapparm,$recurseparm,$what,$courseopt) = @_; + my ($coursereply,$resultitem,$resultgroup,$resultlevel,$resulttype); + my $grpfound = 0; + my @levels = ($symbparm,$mapparm,$recurseparm,$what); + my @levelnames = ('resource','map/folder','recursive','general'); + foreach my $group (@{$usersgroups}) { + if ($grpfound) { last; } + for (my $i=0; $i<@levels; $i++) { + my $item = $courseid.'.['.$group.'].'.$levels[$i]; + if (defined($$courseopt{$item})) { + $coursereply = $$courseopt{$item}; + $resultitem = $item; + $resultgroup = $group; + $resultlevel = $levelnames[$i]; + $resulttype = $$courseopt{$item.'.type'}; + $grpfound = 1; + last; + } + } + } + return($coursereply,$resultitem,$resultgroup,$resultlevel,$resulttype); +} -Input: See list below: -=over 4 -=item B: An array that will contain all of the ids in the course. +# Extracts lots of information about all of the the course's resources into a variety of hashes, using lonnavmaps and lonnet::metadata. +# All the parameters are references and are filled by the sub. +# +# @param {array reference} $ids - resource ids +# @param {hash reference} $typep - hash resource id (from big hash) -> resource type (file extension) +# @param {hash reference} $keyp - hash resource id -> comma-separated list of parameter keys from lonnet::metadata +# @param {hash reference} $allparms - hash parameter name -> parameter title +# @param {hash reference} $allparts - hash parameter part -> part title (a parameter part can be problem part.'_'.response id for response parameters) +# @param {hash reference} $allmaps - hash map id (from big hash) -> map src +# @param {hash reference} $mapp - hash resource id -> enclosing map src +# @param {hash reference} $symbp - hash map id or resource id -> map src.'___(all)' for a map or resource symb for a resource +# @param {hash reference} $maptitles - hash map id or src -> map title (this should really be two separate hashes) +# @param {hash reference} $uris - hash resource id -> resource src +# @param {hash reference} $keyorder - hash parameter key -> appearance rank for this parameter when looking through every resource and every parameter, starting at 100 (integer) +# @param {hash reference} $defkeytype - hash parameter name -> parameter type +sub extractResourceInformation { + my $ids = shift; + my $typep = shift; + my $keyp = shift; + my $allparms = shift; + my $allparts = shift; + my $allmaps = shift; + my $mapp = shift; + my $symbp = shift; + my $maptitles=shift; + my $uris=shift; + my $keyorder=shift; + my $defkeytype=shift; + + my $keyordercnt=100; + + my $navmap = Apache::lonnavmaps::navmap->new(); + my @allres=$navmap->retrieveResources(undef,undef,1,undef,1); + foreach my $resource (@allres) { + my $id=$resource->id(); + my ($mapid,$resid)=split(/\./,$id); + if ($mapid eq '0') { next; } + $$ids[$#$ids+1]=$id; + my $srcf=$resource->src(); + $srcf=~/\.(\w+)$/; + $$typep{$id}=$1; + $$keyp{$id}=''; + $$uris{$id}=$srcf; -=item B: hash, id->type, where "type" contains the extension of the file, thus, I. + foreach my $key (split(/\,/,&Apache::lonnet::metadata($srcf,'allpossiblekeys'))) { + next if ($key!~/^parameter_/); -=item B: hash, id->key list, will contain a comma separated list of the meta-data keys available for the given id +# Hidden parameters + next if (&Apache::lonnet::metadata($srcf,$key.'.hidden') eq 'parm'); +# +# allparms is a hash of parameter names +# + my $name=&Apache::lonnet::metadata($srcf,$key.'.name'); + if (!exists($$allparms{$name}) || $$allparms{$name} =~ m/^\s*$/ ) { + my ($display,$parmdis); + $display = &standard_parameter_names($name); + if ($display eq '') { + $display= &Apache::lonnet::metadata($srcf,$key.'.display'); + $parmdis = $display; + $parmdis =~ s/\s*\[Part.*$//g; + } else { + $parmdis = &mt($display); + } + $$allparms{$name}=$parmdis; + if (ref($defkeytype)) { + $$defkeytype{$name}= + &Apache::lonnet::metadata($srcf,$key.'.type'); + } + } -=item B: hash, name of parameter->display value (what is the display value?) +# +# allparts is a hash of all parts +# + my $part= &Apache::lonnet::metadata($srcf,$key.'.part'); + $$allparts{$part} = &mt('Part: [_1]',$part); +# +# Remember all keys going with this resource +# + if ($$keyp{$id}) { + $$keyp{$id}.=','.$key; + } else { + $$keyp{$id}=$key; + } +# +# Put in order +# + unless ($$keyorder{$key}) { + $$keyorder{$key}=$keyordercnt; + $keyordercnt++; + } + } -=item B: hash, part identification->text representation of part, where the text representation is "[Part $part]" -=item B: hash, full key to part->display value (what's display value?) + if (!exists($$mapp{$mapid})) { + $$mapp{$id}= + &Apache::lonnet::declutter($resource->enclosing_map_src()); + $$mapp{$mapid}=$$mapp{$id}; + $$allmaps{$mapid}=$$mapp{$id}; + if ($mapid eq '1') { + $$maptitles{$mapid}=&mt('Main Content'); + } else { + $$maptitles{$mapid}=&Apache::lonnet::gettitle($$mapp{$id}); + } + $$maptitles{$$mapp{$id}}=$$maptitles{$mapid}; + $$symbp{$mapid}=$$mapp{$id}.'___(all)'; # Added in rev. 1.57, but seems not to be used. + # Lines 1038 and 1114 which use $symbp{$mapid} + # are commented out in rev. 1.57 + } else { + $$mapp{$id} = $$mapp{$mapid}; + } + $$symbp{$id}=&Apache::lonnet::encode_symb($$mapp{$id},$resid,$srcf); + } +} -=item B: hash, ??? -=item B: ??? +# Tells if a parameter type is a date. +# +# @param {string} type - parameter type +# @returns{boolean} - true if it is a date +sub isdateparm { + my $type=shift; + return (($type=~/^date/) && (!($type eq 'date_interval'))); +} -=item B: hash, ??? +# Prints the HTML and Javascript to select parameters, with various shortcuts. +# FIXME: remove unused parameters +# +# @param {Apache2::RequestRec} $r - the Apache request (unused) +# @param {hash reference} $allparms - hash parameter name -> parameter title +# @param {array reference} $pscat - list of selected parameter names (unused) +# @param {hash reference} $keyorder - hash parameter key -> appearance rank (unused) +sub parmmenu { + my ($r,$allparms,$pscat,$keyorder)=@_; + my $tempkey; + $r->print(< +// : ?? + var li = "_li"; + var displayOverview = ""; + + if (value == false) { + displayOverview = "none" + } -=item B: hash, id->full sym? + for (i=0; i