--- loncom/interface/lonprintout.pm 2010/05/11 12:22:10 1.568.2.5 +++ loncom/interface/lonprintout.pm 2010/02/28 22:38:45 1.572 @@ -2,7 +2,7 @@ # The LearningOnline Network # Printout # -# $Id: lonprintout.pm,v 1.568.2.5 2010/05/11 12:22:10 raeburn Exp $ +# $Id: lonprintout.pm,v 1.572 2010/02/28 22:38:45 raeburn Exp $ # # Copyright Michigan State University Board of Trustees # @@ -306,16 +306,11 @@ sub set_font_size { my ($text) = @_; - # There appear to be cases where the font directive is empty.. in which - # case the first substituion would insert a spurious \ oh happy day. - # as this has been the cause of much mystery and hair pulling _sigh_ - - if ($font_size ne '') { - - $text =~ s/\\begin{document}/\\begin{document}{\\$font_size/; - } + $text =~ s/\\begin{document}/\\begin{document}{\\$font_size/; $text =~ s/\\end{document}/}\\end{document}/; return $text; + + } # include_pdf - PDF files are included into the @@ -499,12 +494,15 @@ sub printf_style_subst { # %a - Assignment name. # %c - Course name. # %n - Student name. +# %s - The section if it is supplied. # sub format_page_header { - my ($width, $format, $assignment, $course, $student) = @_; + my ($width, $format, $assignment, $course, $student, $section) = @_; + + $width = &recalcto_mm($width); # Get width in mm. - my $chars_per_line = int($width/2); # Character/textline. + my $chars_per_line = int($width/1.6); # Character/textline. # Default format? @@ -520,36 +518,58 @@ sub format_page_header { # - Allow the assignment to be 2 lines (wrapped). # - my $firstline = "$student $course"; - if (length($firstline) > $chars_per_line) { - my $lastchar = $chars_per_line - length($student) - 1; - if ($lastchar > 0) { - $course = substr($course, 0, $lastchar); - } else { # Nothing left of course: - $course = ''; - } - } - if (length($assignment) > $chars_per_line) { - $assignment = substr($assignment, 0, $chars_per_line); - } + - $format = "\\textbf{$student} $course \\hfill \\thepage \\\\ \\textit{$assignment}"; + my $name_length = int($chars_per_line *3 /4); + my $sec_length = int($chars_per_line / 5); + + $format = "%$name_length".'n'; + + if ($section) { + $format .= ' - Sec: '."%$sec_length".'s'; + } + + $format .= '\\\\%c \\\\ %a'; + - } else { - # An open question is how to handle long user formatted page headers... - # A possible future is to support e.g. %na so that the user can control - # the truncation of the elements that can appear in the header. - # - $format = &printf_style_subst("a", $format, $assignment); - $format = &printf_style_subst("c", $format, $course); - $format = &printf_style_subst("n", $format, $student); - - # If the user put %'s in the format string, they must be escaped - # to \% else LaTeX will think they are comments and terminate - # the line.. which is bad!!! } + # An open question is how to handle long user formatted page headers... + # A possible future is to support e.g. %na so that the user can control + # the truncation of the elements that can appear in the header. + # + $format = &printf_style_subst("a", $format, $assignment); + $format = &printf_style_subst("c", $format, $course); + $format = &printf_style_subst("n", $format, $student); + $format = &printf_style_subst("s", $format, $section); + + # If the user put %'s in the format string, they must be escaped + # to \% else LaTeX will think they are comments and terminate + # the line.. which is bad!!! + + # If the user has role author, $course and $assignment are empty so + # there is '\\ \\ ' in the page header. That's cause a error in LaTeX + if($format =~ /\\\\\s\\\\\s/) { + #TODO find sensible caption for page header + my $testPrintout = '\\\\'.&mt('Construction Space').' \\\\'.&mt('Test-Printout '); + $format =~ s/\\\\\s\\\\\s/$testPrintout/; + } + # + # We're going to trust LaTeX to break lines appropriately, but + # we'll truncate anything that's more than 3 lines worth of + # text. This is also assuming (which will probably end badly) + # nobody's going to embed LaTeX control sequences in the title + # header or rather that those control sequences won't get broken + # by the stuff below. + # + my $total_length = 3*$chars_per_line; + if (length($format) > $total_length) { + $format = substr($format, 0, $total_length); + } + + return $format; + } # @@ -1245,6 +1265,8 @@ sub get_course { my $courseidinfo; if (defined($env{'request.course.id'})) { $courseidinfo = &Apache::lonxml::latex_special_symbols(&unescape($env{'course.'.$env{'request.course.id'}.'.description'}),'header'); + my $sec = $env{'request.course.sec'}; + } return $courseidinfo; } @@ -1267,7 +1289,6 @@ sub page_format_transformation { my $name = &get_name(); my $courseidinfo = &get_course(); - if (defined($courseidinfo)) { $courseidinfo=' - '.$courseidinfo } my $header_text = $parmhash{'print_header_format'}; $header_text = &format_page_header($textwidth, $header_text, $assignment, $courseidinfo, $name); @@ -1288,13 +1309,7 @@ sub page_format_transformation { $text =~ s/\\pagestyle{fancy}\\rhead{}\\chead{}\s*\\begin{document}/\\textheight = $textheight\\oddsidemargin = $evenoffset\n\\evensidemargin = $evenoffset $topmargintoinsert\\textwidth= $textwidth\\newlength{\\minipagewidth}\n\\setlength{\\minipagewidth}{\\textwidth\/\$number_of_columns-0\.2cm}\\renewcommand{\\ref}{\\keephidden\}\\pagestyle{fancy}\\rhead{}\\chead{}\\usepackage{booktabs}\\begin{document}\\voffset=-0\.8cm\n\\setcounter{page}{1} \\vskip 5 mm\n /; } if ($papersize eq 'a4') { - my $papersize_text; - if ($perm{'pav'}) { - $papersize_text = '\\special{papersize=210mm,297mm}'; - } else { - $papersize_text = '\special{papersize=210mm,297mm}'; - } - $text =~ s/(\\begin{document})/$1$papersize_text/; + $text =~ s/(\\begin{document})/$1\\special{papersize=210mm,297mm}/; } } if ($tableofcontents eq 'yes') {$text=~s/(\\setcounter\{page\}\{1\})/$1 \\tableofcontents\\newpage /;} @@ -1566,7 +1581,7 @@ sub print_page_in_course { $form{'grade_target'} = 'tex'; $form{'textwidth'} = &get_textwidth($helper, $LaTeXwidth); - $form{'pdfFormFields'} = 'no'; + $form{'pdfFormFiels'} = $pdfFormFields; # $form{'showallfoils'} = $helper->{'VARS'}->{'showallfoils'}; $form{'problem_split'}=$parmhash{'problem_stream_switch'}; @@ -1742,7 +1757,7 @@ sub recently_generated { # # # use Data::Dumper; -#sub dump_helper_vars { +# sub dump_helper_vars { # my ($helper) = @_; # my $helpervars = Dumper($helper->{'VARS'}); # &Apache::lonnet::logthis("Dump of helper vars:\n $helpervars"); @@ -1757,6 +1772,122 @@ sub get_page_breaks { } return %page_breaks; } +# +# Returns text to insert for any extra vskip prior to the resource. +# Parameters: +# helper - Reference to the helper object driving the printout. +# resource - Identifies the resource about to be printed. +# +# This is done as follows: +# POSSIBLE_RESOURCES has the list of possible resources. +# EXTRASPACE has the list of extra space values. +# EXTRASPACE_UNITS is the set of resources for which the units are +# mm. All others are 'in'. +# +# The resource is found in the POSSIBLE_RESOURCES to get the index +# of the EXTRASPACE value. +# +# In order to speed this up for lengthy printouts, the first time, +# POSSIBLE_RESOURCES is turned into a look up hash and +# EXTRASPACE is turned into an array. +# + + +my %possible_resources; +my %extraspace_mm; +my @extraspace; +my $skips_loaded = 0; + +# Function to load the skips hash and array + +sub load_skips { + + my ($helper) = @_; + + # If this is the first time, unrap the resources and extra spaces: + + if (!$skips_loaded) { + @extraspace = (split(/\|\|\|/, $helper->{'VARS'}->{'EXTRASPACE'})); + my @resource_list = (split(/\|\|\|/, $helper->{'VARS'}->{'POSSIBLE_RESOURCES'})); + my $i = 0; + foreach my $resource (@resource_list) { + $possible_resources{$resource} = $i; + $i++; + } + foreach my $mm_resource (split(/\|\|\|/, $helper->{'VARS'}->{'EXTRASPACE_UNITS'})) { + $extraspace_mm{$mm_resource} = 1; + } + $skips_loaded = 1; + } +} + +sub get_extra_vspaces { + my ($helper, $resource) = @_; + + &load_skips($helper); + + # Lookup the resource in the possible resources hash.. that is the index + # into the extraspace array that gives us either an empty string or + # the number of mm to skip: + + my $index = $possible_resources{$resource}; + my $skip = $extraspace[$index]; + + my $result = ''; + if ($skip ne '') { + my $units = 'in'; + if (defined($extraspace_mm{$resource})) { + $units = 'mm'; + } + $result = '\vskip '.$skip.' '.$units; + } + + + return $result; + + +} + +# +# The resource chooser part of the helper needs more than just +# the value of the extraspaces var to recover the value into a text +# field option. This sub produces the required format for the saved var: +# specifically +# ||| separated fields of the form resourcename=value +# +# Parameters: +# $helper - Refers to the helper we are configuring +# Implicit input: +# $helper->{'VARS'}->{'EXTRASPACE'} - the spaces helper var has the text field +# value. +# $helper->{'VARS'}->{'EXTRASPACE_UNITS'} - units for the skips (checkboxes). +# $helper->{'VARS'}->{'POSSIBLE_RESOURCES'} - has the list of resources. ||| +# separated of course. +# Implicit outputs: +# $env{'form.extraspace'} +# $env{'form.extraspace_units'} +# +sub set_form_extraspace { + my ($helper) = @_; + + # the most convenient way to do this is to drive from the skips arrays/hash. + # may not be the fastest, but this is once per print request so it's not so + # speed critical: + + &load_skips($helper); + + my $result = ''; + + foreach my $resource (keys(%possible_resources)) { + my $vskip = $extraspace[$possible_resources{$resource}]; + $result .= $resource .'=' . $vskip . '|||'; + } + + $env{'form.extraspace'} = $result; + $env{'form.extraspace_units'} = $helper->{'VARS'}->{'EXTRASPACE_UNITS'}; + return $result; + +} # Output a sequence (recursively if neeed) # from construction space. @@ -1928,11 +2059,13 @@ ENDPART # indexed by symb and contains 1's for each break. $env{'form.pagebreaks'} = $helper->{'VARS'}->{'FINISHPAGE'}; + &set_form_extraspace($helper); $env{'form.lastprinttype'} = $helper->{'VARS'}->{'PRINT_TYPE'}; &Apache::loncommon::store_course_settings('print', {'pagebreaks' => 'scalar', + 'extraspace' => 'scalar', + 'extraspace_units' => 'scalar', 'lastprinttype' => 'scalar'}); - my %page_breaks = &get_page_breaks($helper); my $format_from_helper = $helper->{'VARS'}->{'FORMAT'}; @@ -1957,7 +2090,7 @@ ENDPART my %form; $form{'grade_target'} = 'tex'; $form{'textwidth'} = &get_textwidth($helper, $LaTeXwidth); - $form{'pdfFormFields'} = 'no'; + $form{'pdfFormFields'} = $pdfFormFields; # If form.showallfoils is set, then request all foils be shown: # privilege will be enforced both by not allowing the @@ -2196,6 +2329,7 @@ ENDPART $result.="\\newpage\n"; } } + $result .= &get_extra_vspaces($helper, $master_seq[$i]); my ($sequence,$middle_thingy,$urlp)=&Apache::lonnet::decode_symb($master_seq[$i]); $urlp=&Apache::lonnet::clutter($urlp); $form{'symb'}=$master_seq[$i]; @@ -2267,7 +2401,6 @@ ENDPART if (($selectionmade == 4) and ($assignment ne $prevassignment)) { my $name = &get_name(); my $courseidinfo = &get_course(); - if (defined($courseidinfo)) { $courseidinfo=' - '.$courseidinfo } $prevassignment=$assignment; my $header_text = $parmhash{'print_header_format'}; $header_text = &format_page_header($textwidth, $header_text, @@ -2798,6 +2931,7 @@ sub print_resources { $current_output.= "\\newpage\n"; } } + $current_output .= &get_extra_vspaces($helper, $curresline); $i++; if ( !($type eq 'problems' && @@ -2890,12 +3024,10 @@ sub print_resources { my $courseidinfo = &get_course(); - if (defined($courseidinfo)) { $courseidinfo=' - '.$courseidinfo } - if ($usersection ne '') {$courseidinfo.=' - Sec. '.$usersection} my $currentassignment=&Apache::lonxml::latex_special_symbols($helper->{VARS}->{'assignment'},'header'); my $header_line = &format_page_header($LaTeXwidth, $parmhash{'print_header_format'}, - $currentassignment, $courseidinfo, $fullname); + $currentassignment, $courseidinfo, $fullname, $usersection); my $header_start = ($columns_in_format == 1) ? '\lhead' : '\fancyhead[LO]'; $header_line = $header_start.'{'.$header_line.'}'; @@ -3047,19 +3179,21 @@ sub printHelper { $helper->declareVar('PRINT_TYPE'); $helper->declareVar("showallfoils"); $helper->declareVar("STUDENTS"); - + $helper->declareVar("EXTRASPACE"); - # The page breaks can get loaded initially from the course environment: + # The page breaks and extra spaces + # can get loaded initially from the course environment: # But we only do this in the initial state so that they are allowed to change. # - # $helper->{VARS}->{FINISHPAGE} = ''; &Apache::loncommon::restore_course_settings('print', {'pagebreaks' => 'scalar', + 'extraspace' => 'scalar', + 'extraspace_units' => 'scalar', 'lastprinttype' => 'scalar'}); # This will persistently load in the data we want from the @@ -3069,10 +3203,15 @@ sub printHelper { if (!defined ($env{"form.CURRENT_STATE"})) { $helper->{VARS}->{FINISHPAGE} = $env{'form.pagebreaks'}; + $helper->{VARS}->{EXTRASPACE} = $env{'form.extraspace'}; + $helper->{VARS}->{EXTRASPACE_UNITS} = $env{'form.extraspace_units'}; } else { my $state = $env{"form.CURRENT_STATE"}; if ($state eq "START") { $helper->{VARS}->{FINISHPAGE} = $env{'form.pagebreaks'}; + $helper->{VARS}->{EXTRASPACE} = $env{'form.extraspace'}; + $helper->{VARS}->{EXTRASPACE_UNITS} = $env{'form.extraspace_units'}; + } } @@ -3191,7 +3330,16 @@ sub printHelper { if ($perm{'pav'}) { $start_new_option = "