[BACK]Return to lonprintout.pm CVS log [TXT] [DIR] Up to [LON-CAPA] / loncom / interface

Diff for /loncom/interface/lonprintout.pm between versions 1.591 and 1.627.2.14

version 1.591, 2011/06/14 10:22:39 version 1.627.2.14, 2015/03/11 04:15:47
Line 1 Line 1
   
 # The LearningOnline Network  # The LearningOnline Network
 # Printout  # Printout
 #  #
Line 41  use Apache::admannotations; Line 40  use Apache::admannotations;
 use Apache::lonenc;  use Apache::lonenc;
 use Apache::entities;  use Apache::entities;
 use Apache::londefdef;  use Apache::londefdef;
   # use Apache::structurelags; # for language management.
   
 use File::Basename;  use File::Basename;
   
 use HTTP::Response;  use HTTP::Response;
 use LONCAPA::map();  use LONCAPA::map();
 use POSIX qw(strftime);  
 use Apache::lonlocal;  use Apache::lonlocal;
 use Carp;  use Carp;
 use LONCAPA;  use LONCAPA;
Line 76  my $font_size = 'normalsize'; # Default Line 75  my $font_size = 'normalsize'; # Default
   
 #----------------------------  Helper helpers. -------------------------  #----------------------------  Helper helpers. -------------------------
   
   ## 
   # Filter function to determine if a resource is a printable sequence.
   #
   # @param $res -Resource to check.
   #
   # @return 1 - printable and a resource
   #         0 - either notm a sequence or not printable.
   #
   sub printable_sequence {
       my $res = shift;
   
       # Non-sequences are not listed:
   
       if (!$res->is_sequence()) {
    return 0;
       }
   
       # Person with pav or pfo can always print:
   
       if ($perm{'pav'} || $perm{'pfo'}) {
    return 1;
       }
   
       if ($res->is_sequence()) {
    my $symb = $res->symb();
    my $navmap   = $res->{NAV_MAP};
   
    # Find the first resource in the map:
   
    my $iterator = $navmap->getIterator($res, undef, undef, 1, 1);
    my $first    = $iterator->next();
   
    while (1) {
       if ($first == $iterator->END_ITERATOR) { last; }
       if (ref($first) && ! $first->is_sequence()) {last; }
       $first = $iterator->next();
    }
   
   
    # Might be an empty map:
   
    if (!ref($first)) {
       return 0;
    }
    my $partsref = $first->parts();
    my @parts    = @$partsref;
    my ($open, $close) = $navmap->map_printdates($first, $parts[0]);
    return &printable($open, $close);
       }
       return 0;
   }
   
 # BZ5209:  # BZ5209:
 #    Create the states needed to run the helper for incomplete problems from  #    Create the states needed to run the helper for incomplete problems from
 #    the current folder for selected students.  #    the current folder for selected students.
Line 96  my $font_size = 'normalsize'; # Default Line 147  my $font_size = 'normalsize'; # Default
 # Return:  # Return:
 #     XML that can be parsed by the helper to drive the state machine.  #     XML that can be parsed by the helper to drive the state machine.
 #  #
 sub create_incomplete_folder_selstud_helper($helper)  sub create_incomplete_folder_selstud_helper {
 {  
     my ($helper, $map)  = @_;      my ($helper, $map)  = @_;
   
   
Line 123  sub create_incomplete_folder_selstud_hel Line 173  sub create_incomplete_folder_selstud_hel
   
     my $format_chooser = &generate_format_selector($helper,      my $format_chooser = &generate_format_selector($helper,
  'Format of the print job',   'Format of the print job',
  '','CHOOSE_STUDENTS_INCOMPLETE_FORMAT'); # end state.   'CHOOSE_STUDENTS_INCOMPLETE_FORMAT'); # end state.
   
     return $resource_chooser . $student_chooser . $format_chooser;      return $resource_chooser . $student_chooser . $format_chooser;
 }    }  
Line 172  sub create_incomplete_course_helper { Line 222  sub create_incomplete_course_helper {
   
     my $format = &generate_format_selector($helper,      my $format = &generate_format_selector($helper,
    'Format of the print job',     'Format of the print job',
    '',  
    'INCOMPLETE_PROBLEMS_COURSE_FORMAT'); # end state.     'INCOMPLETE_PROBLEMS_COURSE_FORMAT'); # end state.
   
     return $resource_chooser . $people_chooser . $format;      return $resource_chooser . $people_chooser . $format;
Line 303  CHOOSE_RESOURCES Line 352  CHOOSE_RESOURCES
       </resource>        </resource>
     </state>      </state>
 CHOOSE_RESOURCES  CHOOSE_RESOURCES
   
     return $result;      return $result;
 }  }
 #  #
Line 356  sub generate_code_selector { Line 404  sub generate_code_selector {
     <message></td><td></message>      <message></td><td></message>
     <string variable="ANON_CODE_STORAGE_NAME" maxlength="50" size="20" />      <string variable="ANON_CODE_STORAGE_NAME" maxlength="50" size="20" />
     <message></td></tr><tr><td></message>      <message></td></tr><tr><td></message>
     <message><b>Bubble sheet type:</b></message>      <message><b>Bubblesheet type:</b></message>
     <message></td><td></message>      <message></td><td></message>
     <dropdown variable="CODE_OPTION" multichoice="0" allowempty="0">      <dropdown variable="CODE_OPTION" multichoice="0" allowempty="0">
     $bubble_types      $bubble_types
Line 395  CHOOSE_ANON1 Line 443  CHOOSE_ANON1
    return $result;     return $result;
 }  }
   
   #  Returns the XML for choosing how assignments are to be formatted 
   #  that text must still be parsed by the helper xml parser.
   # Parameters: 3 (required)
   
   #   helper       - The helper; $helper->{'VARS'}->{'PRINT_TYPE'} used
   #                  to check if splitting PDFs by section can be offered.
   #   title        - Title for the current state. 
   #   this_state   - State name of the chooser.
   
 sub generate_format_selector {  sub generate_format_selector {
     my ($helper,$title,$nextstate, $thisstate) = @_;      my ($helper,$title,$this_state) = @_;
     my $secpdfoption;      my $secpdfoption;
     my $state = 'PRINT_FORMATTING';  
     if ($thisstate) {  
  $state = $thisstate;  
     }  
     unless (($helper->{'VARS'}->{'PRINT_TYPE'} eq 'problems_for_anon')     ||      unless (($helper->{'VARS'}->{'PRINT_TYPE'} eq 'problems_for_anon')     ||
             ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'problems_for_anon_page') ||              ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'problems_for_anon_page') ||
             ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'resources_for_anon')  ) {              ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'resources_for_anon')  ) {
         $secpdfoption =  '<choice computer="sections">Each PDF contains exactly one section</choice>';          $secpdfoption =  '<choice computer="sections">Each PDF contains exactly one section</choice>';
     }      }
     return <<RESOURCE_SELECTOR;      return <<RESOURCE_SELECTOR;
     <state name="$state" title="$title">      <state name="$this_state" title="$title">
     $nextstate  
     <message><br /><big><i><b>How should the results be printed?</b></i></big><br /></message>      <message><br /><big><i><b>How should the results be printed?</b></i></big><br /></message>
     <choices variable="EMPTY_PAGES">      <choices variable="EMPTY_PAGES">
       <choice computer='0'>Start each student\'s assignment on a new page/column (add a pagefeed after each assignment)</choice>        <choice computer='0'>Start each student\'s assignment on a new page/column (add a pagefeed after each assignment)</choice>
Line 432  RESOURCE_SELECTOR Line 484  RESOURCE_SELECTOR
   
 #-----------------------------------------------------------------------  #-----------------------------------------------------------------------
   
   # Computes an open and close date from a list of open/close dates for a resource's
   # parts.
   #
   # @param \@opens - reference to an array of open dates.
   # @param \@closes - reference to an array of close dates.
   #
   # @return ($open, $close) 
   #
   # @note If open/close dates are not defined they will be returned as undef
   # @note It is possible for there to be no overlap in which case -1,-1 
   #       will be returned.
   # @note The algorithm used is to take the latest open date and the earliest end date.
   #
   sub compute_open_window {
       my ($opensref, $closesref) = @_;
   
       my @opens   = @$opensref;
       my @closes  = @$closesref;
   
       # latest open date:
       my $latest_open;
   
       foreach my $open (@opens) {
    if (!defined($latest_open) || ($open > $latest_open)) {
       $latest_open = $open;
    }
       }
       # Earliest close:
   
       my $earliest_close;
       foreach my $close (@closes) {
    if (!defined($earliest_close) || ($close < $earliest_close)) {
       $earliest_close = $close;
    }
       }
   
       # If no overlap...both are -1 as promised.
   
       if (($earliest_close ne '') && ($latest_open ne '')
    && ($earliest_close < $latest_open)) {
    $latest_open  = -1;
    $earliest_close = -1;
       }
       
       return ($latest_open, $earliest_close);
     
   }
   
   ##
   #  Determines if 'now' is within the set of printable dates.
   #
   #  @param $open_date - Starting date/timestamp.
   #  @param $close_date - Ending date/timestamp.
   #
   #  @return 0 - Not open.
   #  @return 1 - open.
   #
   sub printable {
       my ($open_date, $close_date) = @_;
   
   
       my $now = time();
   
       # Have to do a bit of fancy footwork around undefined open/close dates:
   
       if ($open_date && ($open_date > $now)) {
    return 0;
       }
   
       if ($close_date && ($close_date < $now)) {
    return 0;
       }
       
       return 1;
   
   }
   
   ##
   # Returns the innermost print start/print end dates for a resource.
   # This is done by looking at the start/end dates for its parts and choosing
   # the intersection of those dates.
   # 
   # @param res - lonnvamaps::resource object that represents the resource.
   #
   # @return (opendate, closedate)
   #
   # @note If open/close dates are not defined they will be returned as undef
   # @note It is possible for there to be no overlap in which case -1,-1 
   #       will be returned.
   # @note The algorithm used is to take the latest open date and the earliest end date.
   #       For consistency with &printable() in lonnavmaps.pm determination of start
   #       date for printing checks printstartdate param first, then, if not set,
   #       opendate param, then, if not set, contentopen param.
   
   
   sub get_print_dates {
       my $res = shift;
       my $partsref = $res->parts();
       my @parts;
       if (ref($partsref) eq 'ARRAY') {
           @parts   = @{$partsref};
       }
       my $open_date;
       my $close_date;
       my @open_dates;
       my @close_dates;
   
   
       if (@parts) {
    foreach my $part (@parts) {
       my $partopen  = $res->parmval('printstartdate', $part);
       my $partclose = $res->parmval('printenddate',  $part);
               if (!$partopen) {
                   $partopen = $res->parmval('opendate',$part);
               }
               if (!$partopen) {
                   $partopen = $res->parmval('contentopen',$part);
               }
               if ($partopen) {
                   push(@open_dates, $partopen);
               }
               if ($partclose) {
                   push(@close_dates, $partclose);
               }
       push(@open_dates, $partopen);
       push(@close_dates, $partclose);
    }
       }
   
       ($open_date, $close_date)  = &compute_open_window(\@open_dates, \@close_dates);
   
       return ($open_date, $close_date);
   }
   
   ##
   # Get the dates for which a course says a resource can be printed.  This is like
   # get_print_dates but namvaps::course_print_dates are gotten...and not converted
   # to times either.
   #
   # @param $res - Reference to a resource has from lonnvampas::resource.
   #
   # @return (opendate, closedate)
   #
   sub course_print_dates {
       my $res = shift;
       my $partsref = $res->parts();
       my @parts    = @$partsref;
       my $open_date;
       my $close_date;
       my @open_dates;
       my @close_dates;
       my $navmap = $res->{NAV_MAP}; # Slightly OO dirty.
   
       # Don't bother looping over undefined or empty parts arraY;
   
       if (@parts) {
    foreach my $part (@parts) {
       my ($partopen, $partclose) = $navmap->course_printdates($res, $part);
       push(@open_dates, $partopen);
       push(@close_dates, $partclose);
    }
    ($open_date, $close_date) = &compute_open_window(\@open_dates, \@close_dates);
       }
       return ($open_date, $close_date);
   }
   ##
   # Same as above but for the enclosing map:
   #
   sub map_print_dates {
       my $res = shift;
       my $partsref = $res->parts();
       my @parts    = @$partsref;
       my $open_date;
       my $close_date;
       my @open_dates;
       my @close_dates;
       my $navmap = $res->{NAV_MAP}; # slightly OO dirty.
   
   
       # Don't bother looping over undefined or empty parts arraY;
   
       if (@parts) {
    foreach my $part (@parts) {
       my ($partopen, $partclose) = $navmap->map_printdates($res, $part);
       push(@open_dates, $partopen);
       push(@close_dates, $partclose);
    }
    ($open_date, $close_date) = &compute_open_window(\@open_dates, \@close_dates);
       }
       return ($open_date, $close_date);
   }
   
 # Determine if a resource is incomplete given the map:  # Determine if a resource is incomplete given the map:
 # Parameters:  # Parameters:
 #   $username - Name of user for whom we are checking.  #   $username - Name of user for whom we are checking.
Line 444  RESOURCE_SELECTOR Line 688  RESOURCE_SELECTOR
 sub incomplete {  sub incomplete {
     my ($username, $domain, $map) = @_;      my ($username, $domain, $map) = @_;
   
     # Manipulate the env so the navmap is made  
     # in the context of the appropriate user:  
   
     my $me         = $env{'user.name'};      my $navmap = Apache::lonnavmaps::navmap->new($username, $domain);
     my $my_domain  = $env{'user.domain'};  
   
     $env{'user.name'} = $username;  
     $env{'user.domain'} = $domain;  
   
     my $navmap = Apache::lonnavmaps::navmap->new();  
           
     $env{'user.name'}   = $me; # Restore user/domain context.  
     $env{'user.domain'} = $my_domain;  
   
     if (defined($navmap)) {      if (defined($navmap)) {
  my $res = $navmap->getResourceByUrl($map);   my $res = $navmap->getResourceByUrl($map);
Line 466  sub incomplete { Line 700  sub incomplete {
  return 1;   return 1;
     }      }
 }  }
   #
   #  When printing for students, the resoures and order of the
   #  resources may need to be altered if there are folders with
   #  random selectiopn or random ordering (or both) enabled.
   #  This sub computes the set of resources to print for a student
   #  modified both by random ordering and selection and filtered
   #  to only those that are in the original set selcted to be printed.
   #
   # Parameters:
   #   $map - The URL of the folder being printed.
   #          Used to determine which startResource and finishResource
   #          to use when using the navmap's getIterator method.
   #   $seq   - The original set of resources to print.
   #            (really an array of resource names (array of symb's).
   #   $who   - Student/domain for whome the sequence will be generated.
   #   $code  - CODE being printed when printing Problems/Resources
   #            from folder for CODEd assignments
   #
   # Implicit inputs:
   #   $
   # Returns:
   #   reference to an array of resources that can be passed to
   #   print_resources.
   # 
   sub master_seq_to_person_seq {
       my ($map, $seq, $who, $code, $nohidemap) = @_;
   
   
       my ($username, $userdomain, $usersection) = split(/:/, $who);
   
       # Toss the sequence up into a hash so that we have O(1) lookup time.
       # on the items that come out of the user's list of resources.
       #
   
       my %seq_hash = map {$_  => 1} @$seq;
       my @output_seq;
   
       my $unhidden;
       if ($perm{'pav'} && $perm{'vgr'} && $nohidemap) {
           $unhidden = &Apache::lonnet::clutter($map);
       }
       
       my $navmap           = Apache::lonnavmaps::navmap->new($username, $userdomain,
                                                              $code,$unhidden);
       my ($start,$finish);
   
       if ($map) {
           my $mapres = $navmap->getResourceByUrl($map);
           if ($mapres->is_map()) {
               $start = $mapres->map_start();
               $finish = $mapres->map_finish();
           }
       }
       unless ($start && $finish) {
           $start = $navmap->firstResource();
           $finish = $navmap->finishResource();
       }
   
       my $iterator         = $navmap->getIterator($start,$finish,{},1);
   
       #  Iterate on the resource..select the items that are randomly selected
       #  and that are in the seq_has.  Presumably the iterator will take care
       # of the random ordering part of the deal.
       my $curres;
       while ($curres = $iterator->next()) {
    #
    #  Only process resources..that are not removed by randomout...
    #  and are selected for printint as well.
    #
   
           if (ref($curres) && ! $curres->randomout()) {
               my $currsymb = $curres->symb();
               if (exists($seq_hash{$currsymb})) {
                   push(@output_seq, $currsymb);
       }
    }
       }
   
       return \@output_seq; # for now.
       
   }
   
   
 # Fetch the contents of a resource, uninterpreted.  # Fetch the contents of a resource, uninterpreted.
 # This is used here to fetch a latex file to be included  # This is used here to fetch a latex file to be included
Line 568  sub include_pdf { Line 884  sub include_pdf {
     # (unlikely).  If it did exist, add the pdf to the set of files/images that      # (unlikely).  If it did exist, add the pdf to the set of files/images that
     # need tob e converted for this print job:      # need tob e converted for this print job:
   
     $file =~ s|(.*)/res/|/home/httpd/html/res/|;      my $londocroot = $Apache::lonnet::perlvar{'lonDocRoot'};
       $file =~ s{(.*)/res/}{$londocroot/res/};
   
     open(FILE,">>/home/httpd/prtspool/$env{'user.name'}_$env{'user.domain'}_printout.dat");      open(FILE,">>$Apache::lonnet::perlvar{'lonPrtDir'}/$env{'user.name'}_$env{'user.domain'}_printout.dat");
     print FILE ("$file\n");      print FILE ("$file\n");
     close (FILE);      close (FILE);
   
Line 593  sub include_pdf { Line 910  sub include_pdf {
   
   
 }  }
   ##
   #  Collect the various \select_language{language_name}
   #  latex tags to build a \usepackage[lang-list]{babel} which will
   #  appear just prior to the \begin{document} at the front of the concatenated
   #  set of resources:
   # @param doc - The string of latex to search/replace.
   # @return string
   # @retval - the modified document stringt.
   #
   sub collect_languages {
       my $doc = shift;
       my %languages;
       while ($doc =~ /\\selectlanguage{(\w+)}/mg) {
    $languages{$1} = 1; # allows us to request each language exactly once.
       }
       my @lang_list = (keys(%languages)); # List of unique languages
       if (scalar @lang_list) {
    my $babel_header = '\usepackage[' . join(',', @lang_list) .']{babel}'. "\n";
    $doc =~ s/\\begin{document}/$babel_header\\begin{document}/;
       }
       return $doc;
   }
   #-------------------------------------------------------------------
   
 #  #
 #   ssi_with_retries- Does the server side include of a resource.  #   ssi_with_retries- Does the server side include of a resource.
Line 640  sub ssi_with_retries { Line 979  sub ssi_with_retries {
  $ssi_last_error_resource = $resource;   $ssi_last_error_resource = $resource;
  $ssi_last_error          = $response->code . " " . $response->message;   $ssi_last_error          = $response->code . " " . $response->message;
         $content='\section*{!!! An error occurred !!!}';          $content='\section*{!!! An error occurred !!!}';
  &Apache::lonnet::logthis("Error in SSI resource: $resource Error: $ssi_last_error");  
     }      }
   
     return $content;      return $content;
Line 656  sub get_student_view_with_retries { Line 994  sub get_student_view_with_retries {
         $ssi_last_error_resource = $curresline.' for user '.$username.':'.$userdomain;          $ssi_last_error_resource = $curresline.' for user '.$username.':'.$userdomain;
         $ssi_last_error          = $response->code . " " . $response->message;          $ssi_last_error          = $response->code . " " . $response->message;
         $content='\section*{!!! An error occurred !!!}';          $content='\section*{!!! An error occurred !!!}';
         &Apache::lonnet::logthis("Error in SSI (student view) resource: $curresline Error: $ssi_last_error User: $username:$userdomain");  
     }      }
     return $content;      return $content;
   
Line 719  sub printf_style_subst { Line 1056  sub printf_style_subst {
 #     %s    - The section if it is supplied.  #     %s    - The section if it is supplied.
 #  #
 sub format_page_header {  sub format_page_header {
     my ($width, $format, $assignment, $course, $student, $section) = @_;      my ($width, $format, $assignment, $course, $student) = @_;
   
   
   
     $width = &recalcto_mm($width); # Get width in mm.      $width = &recalcto_mm($width); # Get width in mm.
     my $chars_per_line = int($width/1.6);   # Character/textline.      my $chars_per_line = int($width/2);   # Character/textline.
   
     #  Default format?      #  Default format?
   
Line 740  sub format_page_header { Line 1077  sub format_page_header {
  # - Allow the assignment to be 2 lines (wrapped).   # - Allow the assignment to be 2 lines (wrapped).
  #   #
   
           my $firstline = "$student $course";
           if (length($firstline) > $chars_per_line) {
               my $lastchar = $chars_per_line - length($student) - 1;
               if ($lastchar > 0) {
                   $course = substr($course, 0, $lastchar);
               } else {            # Nothing left of course:
                   $course = '';
               }
           }
           if (length($assignment) > $chars_per_line) {
               $assignment = substr($assignment, 0, $chars_per_line);
           }
   
  my $name_length    = int($chars_per_line *3 /4);          $format =  "\\textbf{$student} $course \\hfill \\thepage \\\\ \\textit{$assignment}";
  my $sec_length     = int($chars_per_line / 5);  
   
  $format  = "%$name_length".'n';      } else {
           # An open question is how to handle long user formatted page headers...
           # A possible future is to support e.g. %na so that the user can control
           # the truncation of the elements that can appear in the header.
           #
           $format =  &printf_style_subst("a", $format, $assignment);
           $format =  &printf_style_subst("c", $format, $course);
           $format =  &printf_style_subst("n", $format, $student);
   
           # If the user put %'s in the format string, they must be escaped
           # to \% else LaTeX will think they are comments and terminate
           # the line.. which is bad!!!
   
  if ($section) {      }
     $format .=  ' - Sec: '."%$sec_length".'s';  
  }  
   
  $format .= '\\\\%c \\\\ %a';      return $format;
           
   
     }  
     # An open question is how to handle long user formatted page headers...  
     # A possible future is to support e.g. %na so that the user can control  
     # the truncation of the elements that can appear in the header.  
     #  
     $format =  &printf_style_subst("a", $format, $assignment);  
     $format =  &printf_style_subst("c", $format, $course);  
     $format =  &printf_style_subst("n", $format, $student);  
     $format =  &printf_style_subst("s", $format, $section);  
       
       
     # If the user put %'s in the format string, they  must be escaped  
     # to \% else LaTeX will think they are comments and terminate  
     # the line.. which is bad!!!  
           
     # If the user has role author, $course and $assignment are empty so      # If the user has role author, $course and $assignment are empty so
     # there is '\\ \\ ' in the page header. That's cause a error in LaTeX      # there is '\\ \\ ' in the page header. That's cause a error in LaTeX
     if($format =~ /\\\\\s\\\\\s/) {      if($format =~ /\\\\\s\\\\\s/) {
         #TODO find sensible caption for page header          #TODO find sensible caption for page header
         my $testPrintout = '\\\\'.&mt('Construction Space').' \\\\'.&mt('Test-Printout ');          my $testPrintout = '\\\\'.&mt('Authoring Space').' \\\\'.&mt('Test-Printout ');
         $format =~ s/\\\\\s\\\\\s/$testPrintout/;          $format =~ s/\\\\\s\\\\\s/$testPrintout/;
     }      }
     #      #
Line 895  sub is_code_valid { Line 1236  sub is_code_valid {
     my ($code_type, $code_length) = ('letter', 6); # defaults.      my ($code_type, $code_length) = ('letter', 6); # defaults.
     my @lines = &Apache::grades::get_scantronformat_file();      my @lines = &Apache::grades::get_scantronformat_file();
     foreach my $line (@lines) {      foreach my $line (@lines) {
           next if (($line =~ /^\#/) || ($line eq ''));
  my ($name, $type, $length) = (split(/:/, $line))[0,2,4];   my ($name, $type, $length) = (split(/:/, $line))[0,2,4];
  if($name eq $code_option) {   if($name eq $code_option) {
     $code_length = $length;      $code_length = $length;
Line 911  sub is_code_valid { Line 1253  sub is_code_valid {
     }      }
   
 }  }
   #
   # Compare two students by section (Used to sort by section).
   #
   #  Implicit inputs, 
   #    $a - The first one
   #    $b - The second one.
   #
   #  Returns:
   #     a-section cmp b-section
   #
   sub compare_sections {
       my ($u1, $d1, $s1, $n1, $stat1) = split(/:/, $a);
       my ($u2, $d2, $s2, $n2, $stat2) = split(/:/, $b);
   
       return $s1 cmp $s2;
   }
   
 #   Compare two students by name.  The students are in the form  #   Compare two students by name.  The students are in the form
 #   returned by the helper:  #   returned by the helper:
Line 1487  sub get_course { Line 1845  sub get_course {
     my $courseidinfo;      my $courseidinfo;
     if (defined($env{'request.course.id'})) {      if (defined($env{'request.course.id'})) {
  $courseidinfo = &Apache::lonxml::latex_special_symbols(&unescape($env{'course.'.$env{'request.course.id'}.'.description'}),'header');   $courseidinfo = &Apache::lonxml::latex_special_symbols(&unescape($env{'course.'.$env{'request.course.id'}.'.description'}),'header');
  my $sec = $env{'request.course.sec'};  
       
     }      }
     return $courseidinfo;      return $courseidinfo;
 }  }
Line 1511  sub page_format_transformation { Line 1867  sub page_format_transformation {
   
     my $name = &get_name();      my $name = &get_name();
     my $courseidinfo = &get_course();      my $courseidinfo = &get_course();
       if (defined($courseidinfo)) { $courseidinfo=' - '.$courseidinfo }
     my $header_text  = $parmhash{'print_header_format'};      my $header_text  = $parmhash{'print_header_format'};
     $header_text     = &format_page_header($textwidth, $header_text, $assignment,      $header_text     = &format_page_header($textwidth, $header_text, $assignment,
    $courseidinfo, $name);     $courseidinfo, $name);
Line 1719  sub unsupported { Line 2076  sub unsupported {
     my $result.= &print_latex_header($mode);      my $result.= &print_latex_header($mode);
     if ($currentURL=~m|^(/adm/wrapper/)?ext/|) {      if ($currentURL=~m|^(/adm/wrapper/)?ext/|) {
  $currentURL=~s|^(/adm/wrapper/)?ext/|http://|;   $currentURL=~s|^(/adm/wrapper/)?ext/|http://|;
           $currentURL=~s|^http://https://|https://|;
  my $title=&Apache::lonnet::gettitle($symb);   my $title=&Apache::lonnet::gettitle($symb);
  $title = &Apache::lonxml::latex_special_symbols($title);   $title = &Apache::lonxml::latex_special_symbols($title);
  $result.=' \strut \\\\ '.$title.' \strut \\\\ '.$currentURL.' ';   $result.=' \strut \\\\ '.$title.' \strut \\\\ '.$currentURL.' ';
Line 1744  sub map_laystyle { Line 2102  sub map_laystyle {
   
 sub print_page_in_course {  sub print_page_in_course {
     my ($helper, $rparmhash, $currentURL, $resources) = @_;      my ($helper, $rparmhash, $currentURL, $resources) = @_;
   
     my %parmhash       = %$rparmhash;      my %parmhash       = %$rparmhash;
     my @page_resources = @$resources;      my @page_resources = @$resources;
     my $mode = $helper->{'VARS'}->{'LATEX_TYPE'};      my $mode = $helper->{'VARS'}->{'LATEX_TYPE'};
Line 1797  sub print_page_in_course { Line 2156  sub print_page_in_course {
     my @page_resources = $navmap->retrieveResources($resource_src);      my @page_resources = $navmap->retrieveResources($resource_src);
     $result           .= &print_page_in_course($helper, $rparmhash,       $result           .= &print_page_in_course($helper, $rparmhash, 
        $resource_src, \@page_resources);         $resource_src, \@page_resources);
           } elsif ($resource->ext()) {
               $result .= &unsupported($currentURL,$mode,$symb);
  }   }
  # these resources go through the XML transformer:   # these resources go through the XML transformer:
   
  elsif ($resource_src =~ /\.(problem|exam|quiz|assess|survey|form|library|xml|html|htm|xhtml|xhtm)$/)  {   elsif ($resource_src =~ /\.(problem|exam|quiz|assess|survey|form|library|xml|html|htm|xhtml|xhtm)$/)  {
   
     my $urlp = &Apache::lonnet::clutter($resource_src);      my $urlp = &Apache::lonnet::clutter($resource_src);
   
     my %form;      my %form;
     my %moreenv;      my %moreenv;
   
Line 1811  sub print_page_in_course { Line 2174  sub print_page_in_course {
   
     $form{'grade_target'}  = 'tex';      $form{'grade_target'}  = 'tex';
     $form{'textwidth'}    = &get_textwidth($helper, $LaTeXwidth);      $form{'textwidth'}    = &get_textwidth($helper, $LaTeXwidth);
     $form{'pdfFormFields'} = $pdfFormFields; #       $form{'pdfFormFields'} = 'no'; # 
     $form{'showallfoils'} = $helper->{'VARS'}->{'showallfoils'};          $form{'showallfoils'} = $helper->{'VARS'}->{'showallfoils'};    
           
     $form{'problem_split'}=$parmhash{'problem_stream_switch'};      $form{'problem_split'}=$parmhash{'problem_stream_switch'};
Line 1863  sub print_page_in_course { Line 2226  sub print_page_in_course {
  $texversion.='\vskip 0 mm \noindent\textbf{'.$title.'}\vskip 0 mm ';   $texversion.='\vskip 0 mm \noindent\textbf{'.$title.'}\vskip 0 mm ';
  $texversion.=&path_to_problem($urlp,$LaTeXwidth);   $texversion.=&path_to_problem($urlp,$LaTeXwidth);
     } else {      } else {
  $texversion.='\vskip 0 mm \noindent\textbf{Prints from construction space - there is no title.}\vskip 0 mm ';   $texversion.='\vskip 0 mm \noindent\textbf{'.
  my $URLpath=$urlp;                          &mt("Printing from Authoring Space: No Title").'}\vskip 0 mm ';
  $URLpath=~s/~([^\/]+)/public_html\/$1\/$1/;   $texversion.=&path_to_problem($urlp,$LaTeXwidth);
  $texversion.=&path_to_problem($URLpath,$LaTeXwidth);  
     }      }
     $texversion.='\vskip 1 mm '.$answer.'\end{document}';      $texversion.='\vskip 1 mm '.$answer.'\end{document}';
  }   }
Line 2134  sub set_form_extraspace { Line 2496  sub set_form_extraspace {
 sub print_construction_sequence {  sub print_construction_sequence {
     my ($currentURL, $helper, %form, $LaTeXwidth) = @_;      my ($currentURL, $helper, %form, $LaTeXwidth) = @_;
   
   
     my $result;      my $result;
     my $rndseed=time;      my $rndseed=time;
     if ($helper->{'VARS'}->{'curseed'}) {      if ($helper->{'VARS'}->{'curseed'}) {
  $rndseed=$helper->{'VARS'}->{'curseed'};   $rndseed=$helper->{'VARS'}->{'curseed'};
     }      }
     my $errtext=&LONCAPA::map::mapread($currentURL);      my $errtext=&LONCAPA::map::mapread(&Apache::lonnet::filelocation('',$currentURL));
   
     #       # 
     #  These make this all support recursing for subsequences.      #  These make this all support recursing for subsequences.
     #      #
     my @order    = @LONCAPA::map::order;      my @order    = @LONCAPA::map::order;
     my @resources = @LONCAPA::map::resources;       my @resources = @LONCAPA::map::resources; 
   
     for (my $member=0;$member<=$#order;$member++) {      for (my $member=0;$member<=$#order;$member++) {
  $resources[$order[$member]]=~/^([^:]*):([^:]*):/;   $resources[$order[$member]]=~/^([^:]*):([^:]*):/;
  my $urlp=$2;   my $urlp=$2;
Line 2161  sub print_construction_sequence { Line 2524  sub print_construction_sequence {
     }      }
     if((($helper->{'VARS'}->{'ANSWER_TYPE'} eq 'no') ||      if((($helper->{'VARS'}->{'ANSWER_TYPE'} eq 'no') ||
  ($helper->{'VARS'}->{'ANSWER_TYPE'} eq 'only')) &&    ($helper->{'VARS'}->{'ANSWER_TYPE'} eq 'only')) && 
        ($urlp=~/\.(problem|exam|quiz|assess|survey|form|library|page)$/)) {         ($urlp=~/$LONCAPA::assess_page_re/)) {
  #  Don't permanently modify %$form...   #  Don't permanently modify %$form...
  my %answerform = %form;   my %answerform = %form;
  $answerform{'grade_target'}='answer';   $answerform{'grade_target'}='answer';
Line 2205  sub print_construction_sequence { Line 2568  sub print_construction_sequence {
     # IF sequence, recurse:      # IF sequence, recurse:
           
     if ($urlp =~ /\.sequence$/) {      if ($urlp =~ /\.sequence$/) {
  my $sequence_url = $urlp;   $result .= &print_construction_sequence($urlp, 
  my $domain       = $env{'user.domain'}; # Constr. space only on local  
  my $user         = $env{'user.name'};  
   
  $sequence_url    =~ s/^\/res\/$domain/\/home/;  
  $sequence_url    =~ s/^(\/home\/$user)/$1\/public_html/;  
 # $sequence_url    =~ s|\/~([^\/]+)\/|\/home\/$1\/public_html\/|;  
  $result .= &print_construction_sequence($sequence_url,   
  $helper, %form,    $helper, %form, 
  $LaTeXwidth);   $LaTeXwidth);
     }      }
Line 2268  sub print_construction_sequence { Line 2624  sub print_construction_sequence {
 #  For item 100, filtering was done at the helper level.  #  For item 100, filtering was done at the helper level.
   
 sub output_data {  sub output_data {
   
     my ($r,$helper,$rparmhash) = @_;      my ($r,$helper,$rparmhash) = @_;
     my %parmhash = %$rparmhash;      my %parmhash = %$rparmhash;
     $ssi_error = 0; # This will be set nonzero by failing ssi's.      $ssi_error = 0; # This will be set nonzero by failing ssi's.
Line 2353  ENDPART Line 2710  ENDPART
     my %form;      my %form;
     $form{'grade_target'} = 'tex';      $form{'grade_target'} = 'tex';
     $form{'textwidth'}    = &get_textwidth($helper, $LaTeXwidth);      $form{'textwidth'}    = &get_textwidth($helper, $LaTeXwidth);
     $form{'pdfFormFields'} = $pdfFormFields;      $form{'pdfFormFields'} = 'no';
   
     # If form.showallfoils is set, then request all foils be shown:      # If form.showallfoils is set, then request all foils be shown:
     # privilege will be enforced both by not allowing the       # privilege will be enforced both by not allowing the 
Line 2384  ENDPART Line 2741  ENDPART
  } else {   } else {
   
             #prints resource from the construction space              #prints resource from the construction space
     $currentURL='/'.$helper->{'VARS'}->{'filename'};      $currentURL=$helper->{'VARS'}->{'filename'};
     if ($currentURL=~/([^?]+)/) {$currentURL=$1;}  
     $cleanURL=$currentURL;      $cleanURL=$currentURL;
  }   }
  $selectionmade = 1;   $selectionmade = 1;
         
  if ($cleanURL!~m|^/adm/|   if ($cleanURL!~m|^/adm/|
     && $cleanURL=~/\.(problem|exam|quiz|assess|survey|form|library|xml|html|htm|xhtml|xhtm)$/) {      && $cleanURL=~/\.(problem|exam|quiz|assess|survey|form|library|xml|html|htm|xhtml|xhtm)$/) {
     my $rndseed=time;      my $rndseed=time;
Line 2428  ENDPART Line 2785  ENDPART
   
     if(($helper->{'VARS'}->{'ANSWER_TYPE'} eq 'no') ||      if(($helper->{'VARS'}->{'ANSWER_TYPE'} eq 'no') ||
        ($helper->{'VARS'}->{'ANSWER_TYPE'} eq 'only')) {         ($helper->{'VARS'}->{'ANSWER_TYPE'} eq 'only')) {
   
  $form{'problem_split'}=$parmhash{'problem_stream_switch'};   $form{'problem_split'}=$parmhash{'problem_stream_switch'};
  $form{'grade_target'}='answer';   $form{'grade_target'}='answer';
  $form{'answer_output_mode'}='tex';   $form{'answer_output_mode'}='tex';
Line 2449  ENDPART Line 2807  ENDPART
  $texversion.='\vskip 0 mm \noindent\textbf{'.$title.'}\vskip 0 mm ';   $texversion.='\vskip 0 mm \noindent\textbf{'.$title.'}\vskip 0 mm ';
  $texversion.=&path_to_problem($cleanURL,$LaTeXwidth);   $texversion.=&path_to_problem($cleanURL,$LaTeXwidth);
     } else {      } else {
  $texversion.='\vskip 0 mm \noindent\textbf{Prints from construction space - there is no title.}\vskip 0 mm ';   $texversion.='\vskip 0 mm \noindent\textbf{'.
  my $URLpath=$cleanURL;                          &mt("Printing from Authoring Space: No Title").'}\vskip 0 mm ';
  $URLpath=~s/~([^\/]+)/public_html\/$1\/$1/;  
  $texversion.=&path_to_problem($URLpath,$LaTeXwidth);   $texversion.=&path_to_problem($cleanURL,$LaTeXwidth);
     }      }
     $texversion.='\vskip 1 mm '.$answer.'\end{document}';      $texversion.='\vskip 1 mm '.$answer.'\end{document}';
  }   }
Line 2484  ENDPART Line 2842  ENDPART
     }      }
         } elsif ($cleanURL!~m|^/adm/|          } elsif ($cleanURL!~m|^/adm/|
  && $currentURL=~/\.(sequence|page)$/ && $helper->{'VARS'}->{'construction'} eq '1') {   && $currentURL=~/\.(sequence|page)$/ && $helper->{'VARS'}->{'construction'} eq '1') {
             #printing content of sequence from the construction space  
   
   
     $currentURL=~s|\/~([^\/]+)\/|\/home\/$1\/public_html\/|;  
     $result .= &print_construction_sequence($currentURL, $helper, %form,      $result .= &print_construction_sequence($currentURL, $helper, %form,
     $LaTeXwidth);      $LaTeXwidth);
     $result .= '\end{document}';        $result .= '\end{document}';  
Line 2544  ENDPART Line 2898  ENDPART
      ($print_type eq 'select_sequences')      or       ($print_type eq 'select_sequences')      or
      ($print_type eq 'map_incomplete_problems_seq')       ($print_type eq 'map_incomplete_problems_seq')
      ) {       ) {
   
     
         #-- produce an output string          #-- produce an output string
  if (($print_type eq 'map_problems')                or   if (($print_type eq 'map_problems')                or
Line 2580  ENDPART Line 2933  ENDPART
   
  &Apache::lonxml::clear_problem_counter();   &Apache::lonxml::clear_problem_counter();
   
  my $pbreakresources = keys %page_breaks;  
  for (my $i=0;$i<=$#master_seq;$i++) {   for (my $i=0;$i<=$#master_seq;$i++) {
   
     &Apache::lonenc::reset_enc();      &Apache::lonenc::reset_enc();
Line 2649  ENDPART Line 3001  ENDPART
                             $texversion=~s/(\\keephidden{ENDOFPROBLEM})/$answer$1/;                              $texversion=~s/(\\keephidden{ENDOFPROBLEM})/$answer$1/;
                         }                          }
     } else {      } else {
  if ($urlp=~/\.(problem|exam|quiz|assess|survey|form|library|page)$/) {   if ($urlp=~/$LONCAPA::assess_page_re/) {
     $texversion=&print_latex_header($helper->{'VARS'}->{'LATEX_TYPE'});      $texversion=&print_latex_header($helper->{'VARS'}->{'LATEX_TYPE'});
 #    $texversion =~ s/\\begin{document}//; # FIXME  #    $texversion =~ s/\\begin{document}//; # FIXME
     my $title = &Apache::lonnet::gettitle($master_seq[$i]);      my $title = &Apache::lonnet::gettitle($master_seq[$i]);
Line 2681  ENDPART Line 3033  ENDPART
  if (($selectionmade == 4) and ($assignment ne $prevassignment)) {   if (($selectionmade == 4) and ($assignment ne $prevassignment)) {
     my $name = &get_name();      my $name = &get_name();
     my $courseidinfo = &get_course();      my $courseidinfo = &get_course();
                       if (defined($courseidinfo)) { $courseidinfo=' - '.$courseidinfo }
     $prevassignment=$assignment;      $prevassignment=$assignment;
     my $header_text = $parmhash{'print_header_format'};      my $header_text = $parmhash{'print_header_format'};
     $header_text    = &format_page_header($textwidth, $header_text,      $header_text    = &format_page_header($textwidth, $header_text,
   $assignment,     $assignment, 
   $courseidinfo,     $courseidinfo, 
   $name);    $name);
   
     if ($numberofcolumns eq '1') {      if ($numberofcolumns eq '1') {
  $result .='\newpage \noindent\parbox{\minipagewidth}{\noindent\\lhead{'.$header_text.'}} \vskip 5 mm ';   $result .='\newpage \noindent\parbox{\minipagewidth}{\noindent\\lhead{'.$header_text.'}} \vskip 5 mm ';
     } else {      } else {
Line 2788  ENDPART Line 3140  ENDPART
  if (($helper->{'VARS'}->{'student_sort'}    eq 1)  &&    if (($helper->{'VARS'}->{'student_sort'}    eq 1)  && 
      ($helper->{'VARS'}->{'SPLIT_PDFS'} ne "sections")) {       ($helper->{'VARS'}->{'SPLIT_PDFS'} ne "sections")) {
      @students = sort compare_names  @students;       @students = sort compare_names  @students;
    } else {
        @students = sort compare_sections @students; 
  }   }
  &adjust_number_to_print($helper);   &adjust_number_to_print($helper);
   
Line 2806  ENDPART Line 3160  ENDPART
  }   }
  my @master_seq=split /\|\|\|/, $helper->{'VARS'}->{'RESOURCES'};   my @master_seq=split /\|\|\|/, $helper->{'VARS'}->{'RESOURCES'};
   
            my $map;
            if ($helper->{VARS}->{'symb'}) {
                ($map, my $id, my $resource) =
                    &Apache::lonnet::decode_symb($helper->{VARS}->{'symb'});
            }
   
  #loop over students   #loop over students
   
   my $flag_latex_header_remove = 'NO';    my $flag_latex_header_remove = 'NO';
Line 2820  ENDPART Line 3180  ENDPART
      ($helper->{'VARS'}->{'PRINT_ANNOTATIONS'} eq 'yes')) {       ($helper->{'VARS'}->{'PRINT_ANNOTATIONS'} eq 'yes')) {
      $moreenv{'problem_split'}='yes';       $moreenv{'problem_split'}='yes';
  }   }
  my %prog_state=&Apache::lonhtmlcommon::Create_PrgWin($r,'Print Status','Class Print Status',$#students+1,'inline','75');   my %prog_state=&Apache::lonhtmlcommon::Create_PrgWin($r,$#students+1);
  my $student_counter=-1;   my $student_counter=-1;
  my $i = 0;   my $i = 0;
  my $last_section = (split(/:/,$students[0]))[2];   my $last_section = (split(/:/,$students[0]))[2];
Line 2840  ENDPART Line 3200  ENDPART
      } else {       } else {
  $i=int($student_counter/$helper->{'VARS'}{'NUMBER_TO_PRINT'});   $i=int($student_counter/$helper->{'VARS'}{'NUMBER_TO_PRINT'});
      }       }
        my $actual_seq = master_seq_to_person_seq($map, \@master_seq,
                                                          $person, undef, 1);
      my ($output,$fullname, $printed)=&print_resources($r,$helper,       my ($output,$fullname, $printed)=&print_resources($r,$helper,
      $person,$type,       $person,$type,
      \%moreenv,\@master_seq,       \%moreenv,  $actual_seq,
      $flag_latex_header_remove,       $flag_latex_header_remove,
      $LaTeXwidth);       $LaTeXwidth);
      $resources_printed .= ":";       $resources_printed .= ":";
Line 2865  ENDPART Line 3227  ENDPART
  my $old_name=$helper->{'VARS'}->{'REUSE_OLD_CODES'};   my $old_name=$helper->{'VARS'}->{'REUSE_OLD_CODES'};
  my $single_code = $helper->{'VARS'}->{'SINGLE_CODE'};   my $single_code = $helper->{'VARS'}->{'SINGLE_CODE'};
  my $selected_code = $helper->{'VARS'}->{'CODE_SELECTED_FROM_LIST'};   my $selected_code = $helper->{'VARS'}->{'CODE_SELECTED_FROM_LIST'};
   
  my $code_option=$helper->{'VARS'}->{'CODE_OPTION'};   my $code_option=$helper->{'VARS'}->{'CODE_OPTION'};
          my @lines = &Apache::grades::get_scantronformat_file();           my @lines = &Apache::grades::get_scantronformat_file();
  my ($code_type,$code_length)=('letter',6);   my ($code_type,$code_length,$bubbles_per_row)=('letter',6,10);
  foreach my $line (@lines) {   foreach my $line (@lines) {
      my ($name,$type,$length) = (split(/:/,$line))[0,2,4];               chomp($line);
        my ($name,$type,$length,$bubbles_per_item) = 
                    (split(/:/,$line))[0,2,4,17];
      if ($name eq $code_option) {       if ($name eq $code_option) {
  $code_length=$length;   $code_length=$length;
  if ($type eq 'number') { $code_type = 'number'; }   if ($type eq 'number') { $code_type = 'number'; }
                    chomp($bubbles_per_item); 
                    if (($bubbles_per_item ne '') && ($bubbles_per_item > 0)) {
                        $bubbles_per_row = $bubbles_per_item; 
                    }
      }       }
  }   }
            my ($randomorder,$randompick,$map);
            if ($helper->{VARS}{'symb'}) {
                ($map, my $id, my $resource) =
                    &Apache::lonnet::decode_symb($helper->{VARS}{'symb'});
                my $navmap = Apache::lonnavmaps::navmap->new();
                if (defined($navmap)) {
                    if ($map) {
                        my $mapres = $navmap->getResourceByUrl($map);
                        $randomorder = $mapres->randomorder();
                        $randompick = $mapres->randompick();
                    }
                }
            }
  my %moreenv = ('textwidth' => &get_textwidth($helper,$LaTeXwidth));   my %moreenv = ('textwidth' => &get_textwidth($helper,$LaTeXwidth));
  $moreenv{'problem_split'}    = $parmhash{'problem_stream_switch'};   $moreenv{'problem_split'}    = $parmhash{'problem_stream_switch'};
          $moreenv{'instructor_comments'}='hide';           $moreenv{'instructor_comments'}='hide';
            $moreenv{'bubbles_per_row'} = $bubbles_per_row;
  my $seed=time+($$<<16)+($$);   my $seed=time+($$<<16)+($$);
  my @allcodes;   my @allcodes;
  if ($old_name) {   if ($old_name) {
Line 2908  ENDPART Line 3289  ENDPART
  $moreenv{'CODE'}=&get_CODE(\%allcodes,$i,$seed,$code_length,   $moreenv{'CODE'}=&get_CODE(\%allcodes,$i,$seed,$code_length,
     $code_type);      $code_type);
      }       }
                $code_name =~ s/^\s+//;
                $code_name =~ s/\s+$//;
      if ($code_name) {       if ($code_name) {
  &Apache::lonnet::put('CODEs',   &Apache::lonnet::put('CODEs',
       {        {
Line 2927  ENDPART Line 3310  ENDPART
      $number_per_page=$num_todo > 0 ? $num_todo : 1;       $number_per_page=$num_todo > 0 ? $num_todo : 1;
  }   }
  my $flag_latex_header_remove = 'NO';    my $flag_latex_header_remove = 'NO'; 
  my %prog_state=&Apache::lonhtmlcommon::Create_PrgWin($r,'Print Status','Class Print Status',$num_todo,'inline','75');   my %prog_state=&Apache::lonhtmlcommon::Create_PrgWin($r,$num_todo);
  my $count=0;   my $count=0;
  foreach my $code (sort(@allcodes)) {   foreach my $code (sort(@allcodes)) {
      my $file_num=int($count/$number_per_page);       my $file_num=int($count/$number_per_page);
Line 2936  ENDPART Line 3319  ENDPART
      } else {       } else {
  $moreenv{'CODE'}=&num_to_letters($code);   $moreenv{'CODE'}=&num_to_letters($code);
      }       }
                my $actual_seq = \@master_seq;
                if ($randomorder || $randompick) {
                    $env{'form.CODE'} = $moreenv{'CODE'};
                    $actual_seq = master_seq_to_person_seq($map, \@master_seq,
                                                           undef,
                                                           $moreenv{'CODE'}, 1);
                    delete($env{'form.CODE'});
                }
      my ($output,$fullname, $printed)=       my ($output,$fullname, $printed)=
  &print_resources($r,$helper,'anonymous',$type,\%moreenv,   &print_resources($r,$helper,'anonymous',$type,\%moreenv,
   \@master_seq,$flag_latex_header_remove,    $actual_seq,$flag_latex_header_remove,
   $LaTeXwidth);    $LaTeXwidth);
      $resources_printed .= ":";       $resources_printed .= ":";
      $print_array[$file_num].=$output;       $print_array[$file_num].=$output;
Line 2969  ENDPART Line 3360  ENDPART
     if ($urlp=~/\//) {      if ($urlp=~/\//) {
  $form{'problem_split'}=$parmhash{'problem_stream_switch'};   $form{'problem_split'}=$parmhash{'problem_stream_switch'};
  $form{'rndseed'}=$rndseed;   $form{'rndseed'}=$rndseed;
  if ($urlp =~ m|/home/([^/]+)/public_html|) {   $urlp =~ s|^$Apache::lonnet::perlvar{'lonDocRoot'}||;
     $urlp =~ s|/home/([^/]*)/public_html|/~$1|;  
  } else {  
     $urlp =~ s|^$Apache::lonnet::perlvar{'lonDocRoot'}||;  
  }  
  $resources_printed .= $urlp.':';   $resources_printed .= $urlp.':';
  my $texversion=&ssi_with_retries($urlp, $ssi_retry_count, %form);   my $texversion=&ssi_with_retries($urlp, $ssi_retry_count, %form);
  if(($helper->{'VARS'}->{'ANSWER_TYPE'} eq 'no') ||   if(($helper->{'VARS'}->{'ANSWER_TYPE'} eq 'no') ||
Line 2994  ENDPART Line 3381  ENDPART
     $texversion.='\vskip 0 mm \noindent ';      $texversion.='\vskip 0 mm \noindent ';
     $texversion.=&path_to_problem ($urlp,$LaTeXwidth);      $texversion.=&path_to_problem ($urlp,$LaTeXwidth);
  } else {   } else {
     $texversion.='\vskip 0 mm \noindent\textbf{Prints from construction space - there is no title.}\vskip 0 mm ';      $texversion.='\vskip 0 mm \noindent\textbf{'.
     my $URLpath=$urlp;                                           &mt("Printing from Authoring Space: No Title").'}\vskip 0 mm ';
     $URLpath=~s/~([^\/]+)/public_html\/$1\/$1/;      $texversion.=&path_to_problem ($urlp,$LaTeXwidth);
     $texversion.=&path_to_problem ($URLpath,$LaTeXwidth);  
  }   }
  $texversion.='\vskip 1 mm '.$answer.'\end{document}';   $texversion.='\vskip 1 mm '.$answer.'\end{document}';
     }      }
  }   }
                 #this chunk is responsible for printing the path to problem                  #this chunk is responsible for printing the path to problem
   
  my $newurlp=$urlp;   my $newurlp=&path_to_problem($urlp,$LaTeXwidth);
  if ($newurlp=~/~/) {$newurlp=~s|\/~([^\/]+)\/|\/home\/$1\/public_html\/|;}  
  $newurlp=&path_to_problem($newurlp,$LaTeXwidth);  
  $texversion =~ s/(\\begin{minipage}{\\textwidth})/$1 $newurlp/;   $texversion =~ s/(\\begin{minipage}{\\textwidth})/$1 $newurlp/;
  if ($flag_latex_header_remove ne 'NO') {   if ($flag_latex_header_remove ne 'NO') {
     $texversion = &latex_header_footer_remove($texversion);      $texversion = &latex_header_footer_remove($texversion);
Line 3055  ENDPART Line 3439  ENDPART
   
     my $URLback=''; #link to original document      my $URLback=''; #link to original document
     if ($helper->{'VARS'}->{'construction'} eq '1') {      if ($helper->{'VARS'}->{'construction'} eq '1') {
  #prints resource from the construction space   $URLback=$helper->{'VARS'}->{'filename'};
  $URLback='/'.$helper->{'VARS'}->{'filename'};  
  if ($URLback=~/([^?]+)/) {  
     $URLback=$1;  
     $URLback=~s|^/~|/priv/|;  
  }  
     }      }
     #      #
     # Final adjustment of the font size:      # Final adjustment of the font size:
Line 3068  ENDPART Line 3447  ENDPART
   
     $result = set_font_size($result);      $result = set_font_size($result);
   
       # Insert any babel headers required.
   
       $result       = &collect_languages($result);
   
   
 #-- writing .tex file in prtspool   #-- writing .tex file in prtspool 
     my $temp_file;      my $temp_file;
     my $identifier = &Apache::loncommon::get_cgi_id();      my $identifier = &Apache::loncommon::get_cgi_id();
Line 3195  sub print_resources { Line 3579  sub print_resources {
     my ($username,$userdomain,$usersection) = split /:/,$person;      my ($username,$userdomain,$usersection) = split /:/,$person;
     my $fullname = &get_name($username,$userdomain);      my $fullname = &get_name($username,$userdomain);
     my $namepostfix = "\\\\"; # Both anon and not anon should get the same vspace.      my $namepostfix = "\\\\"; # Both anon and not anon should get the same vspace.
   
   
     #      #
     # Figure out if we need to filter the output by      # Figure out if we need to filter the output by
     # the incomplete problems for that person      # the incomplete problems for that person
Line 3205  sub print_resources { Line 3591  sub print_resources {
  ($print_type eq 'incomplete_problems_selpeople_course')) {   ($print_type eq 'incomplete_problems_selpeople_course')) {
  $print_incomplete = 1;   $print_incomplete = 1;
     }      }
     if ($person =~ 'anon') {      if ($person eq 'anonymous') {
  $namepostfix .="Name: ";   $namepostfix .=&mt('Name:')." ";
  $fullname = "CODE - ".$moreenv->{'CODE'};   $fullname = "CODE - ".$moreenv->{'CODE'};
     }      }
   
Line 3233  sub print_resources { Line 3619  sub print_resources {
     #      #
   
     my $syllabus_first = 0;      my $syllabus_first = 0;
       my $current_assignment = "";
       my $assignment;
       my $courseidinfo = &get_course();
       my $possprint = scalar(@{$master_seq});
       if (defined($courseidinfo)) { $courseidinfo=' - '.$courseidinfo }
       if ($usersection ne '') {$courseidinfo.=' - Sec. '.$usersection}
   
     foreach my $curresline (@{$master_seq})  {      foreach my $curresline (@{$master_seq})  {
  if (defined $page_breaks{$curresline}) {   if (defined $page_breaks{$curresline}) {
     if($i != 0) {      if($i != 0) {
Line 3241  sub print_resources { Line 3634  sub print_resources {
  }   }
  $current_output .= &get_extra_vspaces($helper, $curresline);   $current_output .= &get_extra_vspaces($helper, $curresline);
  $i++;   $i++;
    my ($map,$id,$res_url) = &Apache::lonnet::decode_symb($curresline);
   
    # See if we need to emit a new header:
   
  if ( !($type eq 'problems' &&    if ( !($type eq 'problems' && 
        ($curresline!~ m/\.(problem|exam|quiz|assess|survey|form|library|page)$/)) ) {         ($curresline!~ m/$LONCAPA::assess_page_re/)) ) {
     my ($map,$id,$res_url) = &Apache::lonnet::decode_symb($curresline);  
     if ($print_incomplete && !&incomplete($username, $userdomain, $res_url)) {      if ($print_incomplete && !&incomplete($username, $userdomain, $res_url)) {
  next;   next;
     }      }
     $actually_printed++; # we're going to print one.      $actually_printed++; # we're going to print one.
   
     if (&Apache::lonnet::allowed('bre',$res_url)) {      if (&Apache::lonnet::allowed('bre',$res_url)) {
  if ($res_url!~m|^ext/|   if ($res_url!~m|^ext/|
     && $res_url=~/\.(problem|exam|quiz|assess|survey|form|library|page|xml|html|htm|xhtml|xhtm)$/) {      && $res_url=~/\.(problem|exam|quiz|assess|survey|form|library|page|xml|html|htm|xhtml|xhtm)$/) {
Line 3347  sub print_resources { Line 3744  sub print_resources {
     }      }
     $remove_latex_header = 'YES';      $remove_latex_header = 'YES';
  }   }
    $assignment = &Apache::lonxml::latex_special_symbols(
       &Apache::lonnet::gettitle($map), 'header');
    if (($assignment ne $current_assignment) && ($assignment ne "")) {
       my $header_line = &format_page_header($LaTeXwidth, $parmhash{'print_header_format'},
     $assignment, $courseidinfo, 
     $fullname);
       my $header_start = ($columns_in_format == 1) ? '\lhead'
    : '\fancyhead[LO]';
       $header_line = $header_start.'{'.$header_line.'}';
       $current_output = $current_output . $header_line;
       $current_assignment = $assignment;
    }
   
  if (&Apache::loncommon::connection_aborted($r)) { last; }   if (&Apache::loncommon::connection_aborted($r)) { last; }
     }      }
     # If we are printing incomplete it's possible we don't have      # If we are printing incomplete it's possible we don't have
Line 3354  sub print_resources { Line 3764  sub print_resources {
     # that so we're going to generate a stub that says there are no      # that so we're going to generate a stub that says there are no
     # incomplete resources for the person.      # incomplete resources for the person.
     #      #
     if ($actually_printed == 0) {  
   
  $current_output  = 'No incomplete resources';      if ($actually_printed == 0) {
  $current_output .= '\end{document}';          my $message = &mt('No resources to print');
  $current_output = &print_latex_header() . $current_output;          if (!$possprint) {
               if ($perm{'pav'} || $perm{'pfo'}) {
                   $message = &mt('There are no unhidden resources to print.')."\n\n".
                              &mt('The most likely reason is one of the following: ')."\n".
                              '\begin{itemize}'."\n".
                              '\item '.&mt("The 'Resource hidden from students' parameter is set for the folder being printed.")."\n".
                              '\item '.&mt("'Hidden' is checked in the Course Editor individually for each resource in the folder being printed.")."\n".
                              '\end{itemize}'."\n\n".
                              &mt("Note: to print a bubblesheet exam which you want to hide from students, ".
                                  "use the Course Editor to check the 'Hidden' checkbox for the exam folder itself.")."\n";
               }
           } elsif ($print_incomplete) {
               $message = &mt('No incomplete resources');
           }
           if ($message) {
               $current_output  = &encapsulate_minipage("\\vskip -10mm \n$message\n \\vskip 100 mm { }\n");
           }
    if ($remove_latex_header eq "NO") {
       $current_output = &print_latex_header() . $current_output;
    } else {
       $current_output = &latex_header_footer_remove($current_output);
    }
     }      }
   
     if ($syllabus_first) {      if ($syllabus_first) {
         $current_output =~ s/\\\\ Last updated:/Last updated:/          $current_output =~ s/\\\\ Last updated:/Last updated:/
     }      }
     my $courseidinfo = &get_course();  
     my $currentassignment=&Apache::lonxml::latex_special_symbols($helper->{VARS}->{'assignment'},'header');      my $currentassignment=&Apache::lonxml::latex_special_symbols($helper->{VARS}->{'assignment'},'header');
     my $header_line =      my $header_line =
  &format_page_header($LaTeXwidth, $parmhash{'print_header_format'},          &format_page_header($LaTeXwidth, $parmhash{'print_header_format'},
     $currentassignment, $courseidinfo, $fullname, $usersection);                              $currentassignment, $courseidinfo, $fullname);
     my $header_start = ($columns_in_format == 1) ? '\lhead'      my $header_start = ($columns_in_format == 1) ? '\lhead' : '\fancyhead[LO]';
                                          : '\fancyhead[LO]';      my $newheader = $header_start.'{'.$header_line.'}';
     $header_line = $header_start.'{'.$header_line.'}';  
     if ($current_output=~/\\documentclass/) {      if ($current_output=~/\\documentclass/) {
  $current_output =~ s/\\begin{document}/\\setlength{\\topmargin}{1cm} \\begin{document}\\noindent\\parbox{\\minipagewidth}{\\noindent$header_line$namepostfix}\\vskip 5 mm /;   $current_output =~ s/\\begin{document}/\\setlength{\\topmargin}{1cm} \\begin{document}\\noindent\\parbox{\\minipagewidth}{\\noindent$newheader$namepostfix}\\vskip 5 mm /;
     } else {      } else {
  my $blankpages =    my $blankpages = 
     '\clearpage\strut\clearpage'x$helper->{'VARS'}->{'EMPTY_PAGES'};      '\clearpage\strut\clearpage'x$helper->{'VARS'}->{'EMPTY_PAGES'};
       
  $current_output = '\strut\vspace*{-6 mm}\\newline'.   $current_output = '\strut\vspace*{-6 mm}\\newline'.
     &copyright_line().' \newpage '.$blankpages.$end_of_student.      &copyright_line().' \newpage '.$blankpages.$end_of_student.
     '\setcounter{page}{1}\noindent\parbox{\minipagewidth}{\noindent'.      '\setcounter{page}{1}\noindent\parbox{\minipagewidth}{\noindent'.
     $header_line.$namepostfix.'} \vskip 5 mm '.$current_output;      $newheader.$namepostfix. '} \vskip 5 mm '.$current_output;
     }      }
     #      #
     #  Close the student bracketing.      #  Close the student bracketing.
Line 3390  sub print_resources { Line 3819  sub print_resources {
   
 }  }
   
   sub printing_blocked {
       my ($r,$blocktext) = @_;
       my $title = &mt('Preparing Printout');
       &Apache::lonhtmlcommon::clear_breadcrumbs();
       &Apache::lonhtmlcommon::add_breadcrumb({href=>'/adm/printout',
                                               text=> $title});
       my $breadcrumbs = &Apache::lonhtmlcommon::breadcrumbs($title);
       &Apache::loncommon::content_type($r,'text/html');
       &Apache::loncommon::no_cache($r);
       $r->send_http_header;
       $r->print(&Apache::loncommon::start_page('Preparing Printout').
                 $breadcrumbs.
                 $blocktext.
                 &Apache::loncommon::end_page());
       return;
   }
   
 sub handler {  sub handler {
   
     my $r = shift;      my $r = shift;
   
       if ($env{'request.course.id'}) {
           my $cdom = $env{'course.'.$env{'request.course.id'}.'.domain'};
           my $cnum = $env{'course.'.$env{'request.course.id'}.'.num'};
           my ($blocked,$blocktext) = 
               &Apache::loncommon::blocking_status('printout',$cnum,$cdom);
           if ($blocked) {
               my $checkrole = "cm./$cdom/$cnum";
               if ($env{'request.course.sec'} ne '') {
                   $checkrole .= "/$env{'request.course.sec'}";
               }
               unless ((&Apache::lonnet::allowed('evb',undef,undef,$checkrole)) && 
                       ($env{'request.role'} !~ m{^st\./$cdom/$cnum})) {
                   &printing_blocked($r,$blocktext);
                   return OK;
               }
           }
       }
           
     &init_perm();      &init_perm();
   
   
   
     my $helper = printHelper($r);      my $helper = printHelper($r);
     if (!ref($helper)) {      if (!ref($helper)) {
  return $helper;   return $helper;
Line 3421  sub handler { Line 3882  sub handler {
   
     &output_data($r,$helper,\%parmhash);      &output_data($r,$helper,\%parmhash);
     return OK;      return OK;
 }   }
   
 use Apache::lonhelper;  use Apache::lonhelper;
   
Line 3466  sub get_randomly_ordered_warning { Line 3927  sub get_randomly_ordered_warning {
     my $func =       my $func = 
         sub { return ($_[0]->is_map() && $_[0]->randomorder); };          sub { return ($_[0]->is_map() && $_[0]->randomorder); };
     my @matches = $navmap->retrieveResources($res, $func,1,1,1);      my @matches = $navmap->retrieveResources($res, $func,1,1,1);
     if (@matches) {  
         $message = "Some of the items below are in folders set to be randomly ordered. However, when printing the contents of these folders, they will be printed in the original order for all students, not the randomized order.";  
     }  
         }  
         if ($message) {  
     return '<message type="warning">'.$message.'</message>';  
         }          }
     } else {      } else {
         $message = "Retrieval of information about ordering of resources failed.";           $message = "Retrieval of information about ordering of resources failed."; 
Line 3561  sub printHelper { Line 4017  sub printHelper {
     }      }
   
     # Detect whether we're coming from construction space      # Detect whether we're coming from construction space
     if ($env{'form.postdata'}=~/^(?:http:\/\/[^\/]+\/|\/|)\~([^\/]+)\/(.*)$/) {      if ($env{'form.postdata'}=~m{^/priv}) {
         $helper->{VARS}->{'filename'} = "~$1/$2";          $helper->{VARS}->{'filename'} = $env{'form.postdata'};
         $helper->{VARS}->{'construction'} = 1;          $helper->{VARS}->{'construction'} = 1;
     } else {      } else {
         if ($env{'form.postdata'}) {          if ($env{'form.postdata'}) {
Line 3600  sub printHelper { Line 4056  sub printHelper {
     my $is_published=0; # True when printing from resource space.      my $is_published=0; # True when printing from resource space.
     my $res_printable = 1; # By default the current resource is printable.          my $res_printable = 1; # By default the current resource is printable.    
     my $userCanPrint = ($perm{'pav'} || $perm{'pfo'});      my $userCanPrint = ($perm{'pav'} || $perm{'pfo'});
       my $res_printstartdate;
       my $res_printenddate;
       my $map_open = 0;
       my $map_close = 0xffffffff;
       my $course_open = 0;
       my $course_close = 0xffffffff;
   
     # Get the resource name from construction space      # Get the resource name from construction space
     if ($helper->{VARS}->{'construction'}) {      if ($helper->{VARS}->{'construction'}) {
Line 3617  sub printHelper { Line 4079  sub printHelper {
     my $navmap = Apache::lonnavmaps::navmap->new();      my $navmap = Apache::lonnavmaps::navmap->new();
     my $res   = $navmap->getBySymb($symb);      my $res   = $navmap->getBySymb($symb);
     $res_printable  = $res->resprintable() || $userCanPrint; #printability in course context      $res_printable  = $res->resprintable() || $userCanPrint; #printability in course context
       ($res_printstartdate, $res_printenddate) = &get_print_dates($res);
       ($course_open, $course_close) = &course_print_dates($res);
       ($map_open, $map_close)       = &map_print_dates($res);
   
  } else {   } else {
     # Resource space.      # Resource space.
   
Line 3635  sub printHelper { Line 4101  sub printHelper {
     if (!$helper->{VARS}->{'curseed'} && $env{'form.curseed'}) {      if (!$helper->{VARS}->{'curseed'} && $env{'form.curseed'}) {
  $helper->{VARS}->{'curseed'}=$env{'form.curseed'};   $helper->{VARS}->{'curseed'}=$env{'form.curseed'};
     }      }
   
     if (!$helper->{VARS}->{'probstatus'} && $env{'form.problemtype'}) {      if (!$helper->{VARS}->{'probstatus'} && $env{'form.problemtype'}) {
  $helper->{VARS}->{'probstatus'}=$env{'form.problemstatus'};   $helper->{VARS}->{'probstatus'}=$env{'form.problemstatus'};
     }      }
Line 3665  sub printHelper { Line 4132  sub printHelper {
   
     if ($resourceTitle && $res_printable) {      if ($resourceTitle && $res_printable) {
         push @{$printChoices}, ["<b><i>$resourceTitle</i></b> (".&mt('the resource you just saw on the screen').")", 'current_document', 'PAGESIZE'];          push @{$printChoices}, ["<b><i>$resourceTitle</i></b> (".&mt('the resource you just saw on the screen').")", 'current_document', 'PAGESIZE'];
     }      } 
       
   
     # Useful filter strings      # Useful filter strings
   
Line 3692  sub printHelper { Line 4158  sub printHelper {
     my $start_new_option;      my $start_new_option;
     if ($perm{'pav'}) {      if ($perm{'pav'}) {
  $start_new_option =    $start_new_option = 
     "<option text='".&mt('Start new page<br />before selected').      "<option text='".&mt('Start new page[_1]before selected','<br />').
     "' variable='FINISHPAGE' />".      "' variable='FINISHPAGE' />".
     "<option text='".&mt('Extra space<br />before selected').      "<option text='".&mt('Extra space[_1]before selected','<br />').
     "' variable='EXTRASPACE' type='text' />" .      "' variable='EXTRASPACE' type='text' />" .
     "<option " .      "<option " .
     "' variable='POSSIBLE_RESOURCES' type='hidden' />".      "' variable='POSSIBLE_RESOURCES' type='hidden' />".
     "<option text='".&mt('Space units<br />check for mm').      "<option text='".&mt('Space units[_1]check for mm','<br />').
     "' variable='EXTRASPACE_UNITS' type='checkbox' />"      "' variable='EXTRASPACE_UNITS' type='checkbox' />"
     ;      ;
           
Line 3771  sub printHelper { Line 4237  sub printHelper {
  my $nextState     = 'CHOOSE_INCOMPLETE_SEQ';   my $nextState     = 'CHOOSE_INCOMPLETE_SEQ';
  my $textSuffix    = '';   my $textSuffix    = '';
   
  if ($userCanPrint) {   if ($userCanPrint)  {
     $printSelector = 'map_incomplete_problems_people_seq';      $printSelector = 'map_incomplete_problems_people_seq';
     $nextState     = 'CHOOSE_INCOMPLETE_PEOPLE_SEQ';      $nextState     = 'CHOOSE_INCOMPLETE_PEOPLE_SEQ';
     $textSuffix    = ' for selected students';      $textSuffix    = ' for selected students';
Line 3779  sub printHelper { Line 4245  sub printHelper {
  &create_incomplete_folder_selstud_helper($helper, $map);    &create_incomplete_folder_selstud_helper($helper, $map); 
     &Apache::lonxml::xmlparse($r, 'helper', $helperStates);      &Apache::lonxml::xmlparse($r, 'helper', $helperStates);
  } else {   } else {
     my $helperStates = &create_incomplete_folder_helper($helper, $map); # Create needed states for student.      if (&printable($map_open, $map_close)) {
     &Apache::lonxml::xmlparse($r, 'helper', $helperStates);   my $helperStates = &create_incomplete_folder_helper($helper, $map); # Create needed states for student.
    &Apache::lonxml::xmlparse($r, 'helper', $helperStates);
       } else {
    # TODO: Figure out how to break the news...this folder is not printable.
       }
  }   }
   
  push(@{$printChoices},   if ($userCanPrint || &printable($map_open, $map_close)) {
      [&mt('Selected Incomplete  [_1]Problems[_2] from folder [_3]' . $textSuffix,      push(@{$printChoices},
   '<b>', '</b>',   [&mt('Selected  [_1]Incomplete Problems[_2] from folder [_3]' . $textSuffix,
   '<b><i>'. $sequenceTitle . '</b></i>'),        '<b>', '</b>',
       $printSelector,        '<b><i>'. $sequenceTitle . '</b></i>'),
       $nextState]);    $printSelector,
     $nextState]);
    }
         # Allow problems from sequence          # Allow problems from sequence
         push @{$printChoices},    if ($userCanPrint || &printable($map_open, $map_close)) {
       push @{$printChoices}, 
     [&mt('Selected [_1]Problems[_2] from folder [_3]','<b>','</b>','<b><i>'.$sequenceTitle.'</i></b>'),       [&mt('Selected [_1]Problems[_2] from folder [_3]','<b>','</b>','<b><i>'.$sequenceTitle.'</i></b>'), 
      'map_problems',        'map_problems', 
      'CHOOSE_PROBLEMS'];       'CHOOSE_PROBLEMS'];
         # Allow all resources from sequence      # Allow all resources from sequence
         push @{$printChoices}, [&mt('Selected [_1]Resources[_2] from folder [_3]','<b>','</b>','<b><i>'.$sequenceTitle.'</i></b>'),       push @{$printChoices}, [&mt('Selected [_1]Resources[_2] from folder [_3]','<b>','</b>','<b><i>'.$sequenceTitle.'</i></b>'), 
  'map_problems_pages',       'map_problems_pages', 
  'CHOOSE_PROBLEMS_HTML'];      'CHOOSE_PROBLEMS_HTML'];
         my $helperFragment = &generate_resource_chooser('CHOOSE_PROBLEMS',      my $helperFragment = &generate_resource_chooser('CHOOSE_PROBLEMS',
  'Select Problem(s) to print',      'Select Problem(s) to print',
  'multichoice="1" toponly="1" addstatus="1" closeallpages="1"',      'multichoice="1" toponly="1" addstatus="1" closeallpages="1"',
  'RESOURCES',      'RESOURCES',
  'PAGESIZE',      'PAGESIZE',
  $map,      $map,
  $isProblem, '',      $isProblem, '',
  $symbFilter,      $symbFilter,
  $start_new_option);      $start_new_option);
  $helperFragment .= &generate_resource_chooser('CHOOSE_PROBLEMS_HTML',      $helperFragment .= &generate_resource_chooser('CHOOSE_PROBLEMS_HTML',
       'Select Resource(s) to print',    'Select Resource(s) to print',
        'multichoice="1" toponly="1" addstatus="1" closeallpages="1"',    'multichoice="1" toponly="1" addstatus="1" closeallpages="1"',
       'RESOURCES',    'RESOURCES',
       'PAGESIZE',    'PAGESIZE',
       $map,    $map,
       $isNotMap, '',    $isNotMap, '',
       $symbFilter,    $symbFilter,
       $start_new_option);    $start_new_option);
       
  &Apache::lonxml::xmlparse($r, 'helper', $helperFragment);      &Apache::lonxml::xmlparse($r, 'helper', $helperFragment);
    } else {
       # TODO: Figure out how to tell them the folder is not printable.
    }
     }      }
    # If the user has pfo (print for others) allow them to print all 
     # If the user has pfo (print for others) allow them to print all    # problems and resources  in the entire course, optionally for selected students
     # problems and resources  in the entire course, optionally for selected students   my $post_data = $helper->{VARS}->{'postdata'};
     my $post_data = $helper->{VARS}->{'postdata'};  
           
     if ($perm{'pfo'} &&  !$is_published  &&      if ($perm{'pfo'} &&  !$is_published  &&
         ($post_data=~/\/res\// || $post_data =~/\/(syllabus|smppg|aboutme|bulletinboard)$/)) {           ($post_data=~/\/res\// || $post_data =~/\/(syllabus|smppg|aboutme|bulletinboard)$/)) { 
Line 3831  sub printHelper { Line 4305  sub printHelper {
  # BZ 5209 - incomplete problems from entire course:   # BZ 5209 - incomplete problems from entire course:
   
  push(@{$printChoices},   push(@{$printChoices},
      [&mtn('Selected incomplete <b>Problems</b> from <b>entire course</b> for selected people'),       [&mtn('Selected <b>Incomplete Problems</b> from <b>entire course</b> for selected people'),
       'incomplete_problems_selpeople_course', 'INCOMPLETE_PROBLEMS_COURSE_RESOURCES']);        'incomplete_problems_selpeople_course', 'INCOMPLETE_PROBLEMS_COURSE_RESOURCES']);
  my $helperFragment = &create_incomplete_course_helper($helper); # Create needed states.   my $helperFragment = &create_incomplete_course_helper($helper); # Create needed states.
   
Line 3855  my $suffixXml = <<ALL_PROBLEMS; Line 4329  my $suffixXml = <<ALL_PROBLEMS;
 ALL_PROBLEMS  ALL_PROBLEMS
          &Apache::lonxml::xmlparse($r, 'helper',            &Apache::lonxml::xmlparse($r, 'helper', 
    &generate_resource_chooser('ALL_PROBLEMS',     &generate_resource_chooser('ALL_PROBLEMS',
       'SelectProblem(s) to print',        'Select Problem(s) to print',
       'multichoice="1" suppressEmptySequences="0" addstatus="1" closeallpages="1"',        'multichoice="1" suppressEmptySequences="0" addstatus="1" closeallpages="1"',
       'RESOURCES',        'RESOURCES',
       'PAGESIZE',        'PAGESIZE',
Line 3923  ALL_PROBLEMS Line 4397  ALL_PROBLEMS
   $map,    $map,
   $isProblem, '', $symbFilter,    $isProblem, '', $symbFilter,
   $start_new_option);    $start_new_option);
         my $secpdfoption;  
         unless (($helper->{'VARS'} eq 'problems_for_anon')     ||  
                 ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'problems_for_anon_page') ||  
                 ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'resources_for_anon')  ) {  
             $secpdfoption =  '<choice computer="sections">Each PDF contains exactly one section</choice>';  
         }  
  $resource_selector .=  &generate_format_selector($helper,   $resource_selector .=  &generate_format_selector($helper,
                                                          'How should results be printed?').                                                           'How should results be printed?',
                                                            'PRINT_FORMATTING').
                                &generate_resource_chooser('CHOOSE_STUDENTS_PAGE',                                 &generate_resource_chooser('CHOOSE_STUDENTS_PAGE',
  'Select Problem(s) to print',   'Select Problem(s) to print',
  "multichoice='1' addstatus='1' closeallpages ='1'",   "multichoice='1' addstatus='1' closeallpages ='1'",
Line 4064  ALL_PROBLEMS Line 4533  ALL_PROBLEMS
     </state>      </state>
 RESOURCE_SELECTOR  RESOURCE_SELECTOR
   
         my $nextstate = '<nextstate>NUMBER_PER_PDF</nextstate>';   
         $resource_selector .= &generate_format_selector($helper,          $resource_selector .= &generate_format_selector($helper,
                                                         'Format of the print job',                                                          'Format of the print job',
                                                         $nextstate);                                                          'PRINT_FORMATTING');
  &Apache::lonxml::xmlparse($r, 'helper', <<CHOOSE_STUDENTS1);   &Apache::lonxml::xmlparse($r, 'helper', <<CHOOSE_STUDENTS1);
   <state name="CHOOSE_STUDENTS1" title="Select Students and Resources">    <state name="CHOOSE_STUDENTS1" title="Select Students and Resources">
     <choices variable='student_sort'>      <choices variable='student_sort'>
Line 4108  CHOOSE_STUDENTS1 Line 4576  CHOOSE_STUDENTS1
     <message></td><td></message>      <message></td><td></message>
     <string variable="ANON_CODE_STORAGE_NAME" maxlength="50" size="20" />      <string variable="ANON_CODE_STORAGE_NAME" maxlength="50" size="20" />
     <message></td></tr><tr><td></message>      <message></td></tr><tr><td></message>
     <message><b>Bubble sheet type:</b></message>      <message><b>Bubblesheet type:</b></message>
     <message></td><td></message>      <message></td><td></message>
     <dropdown variable="CODE_OPTION" multichoice="0" allowempty="0">      <dropdown variable="CODE_OPTION" multichoice="0" allowempty="0">
     $codechoice      $codechoice
Line 4192  CHOOSE_FROM_SUBDIR Line 4660  CHOOSE_FROM_SUBDIR
     <message>Select the sequence to print resources from:</message>      <message>Select the sequence to print resources from:</message>
     <resource variable="SEQUENCE">      <resource variable="SEQUENCE">
       <nextstate>CHOOSE_FROM_ANY_SEQUENCE</nextstate>        <nextstate>CHOOSE_FROM_ANY_SEQUENCE</nextstate>
       <filterfunc>return \$res->is_sequence;</filterfunc>        <filterfunc>return &Apache::lonprintout::printable_sequence(\$res);</filterfunc>
       <valuefunc>return $urlValue;</valuefunc>        <valuefunc>return $urlValue;</valuefunc>
       <choicefunc>return \$res->hasResource(\$res,sub { return !\$_[0]->is_sequence() },0,0);        <choicefunc>return \$res->hasResource(\$res,sub { return !\$_[0]->is_sequence() },0,0);
  </choicefunc>   </choicefunc>
Line 4214  CHOOSE_FROM_ANY_SEQUENCE Line 4682  CHOOSE_FROM_ANY_SEQUENCE
   
     # Generate the first state, to select which resources get printed.      # Generate the first state, to select which resources get printed.
     Apache::lonhelper::state->new("START", "Select Printing Options:");      Apache::lonhelper::state->new("START", "Select Printing Options:");
       if (!$res_printable) {
           my $now = time;
           my $shownprintstart = &Apache::lonlocal::locallocaltime($res_printstartdate);
           my $shownprintend = &Apache::lonlocal::locallocaltime($res_printenddate);
           my $noprintmsg;
           if (($res_printenddate) && ($res_printenddate < $now)) {
                   $noprintmsg = &mt('Printing for current resource no longer available (ended: [_1])',
                                     $shownprintend);
           } else {
               if (($res_printstartdate) && ($res_printstartdate > $now)) {
                   if (($res_printenddate) && ($res_printenddate > $now) && ($res_printenddate > $res_printstartdate)) {
                       $noprintmsg = &mt('Printing for current resource is only possible between [_1] and [_2]',
                                     $shownprintstart,$shownprintend);
                   } elsif (!$res_printenddate) {
                       $noprintmsg = &mt('Printing for current resource will only be possible starting [_1]',
                                         $shownprintstart);
                   } else {
                       $noprintmsg = &mt('Printing for current resource is unavailable');
                   }
               }
           }
   
           if ($noprintmsg) {
               $paramHash = Apache::lonhelper::getParamHash();
               $paramHash->{MESSAGE_TEXT} =
                   '<p class="LC_info">'.$noprintmsg.'</p>';
               Apache::lonhelper::message->new();
           }
       }
       $paramHash = Apache::lonhelper::getParamHash();
     $paramHash = Apache::lonhelper::getParamHash();      $paramHash = Apache::lonhelper::getParamHash();
     $paramHash->{MESSAGE_TEXT} = "";      $paramHash->{MESSAGE_TEXT} = "";
     Apache::lonhelper::message->new();      Apache::lonhelper::message->new();
Line 4553  sub render { Line 5051  sub render {
     my $PaperType=&mt('Paper type');      my $PaperType=&mt('Paper type');
     my $landscape=&mt('Landscape');      my $landscape=&mt('Landscape');
     my $portrait=&mt('Portrait');      my $portrait=&mt('Portrait');
     my $pdfFormLabel=&mt('PDF-Formfields');  
     my $with=&mt('with Formfields');  
     my $without=&mt('without Formfields');  
           
   
     $result.='<h3>'.&mt('Layout Options').'</h3>'      $result.='<h3>'.&mt('Layout Options').'</h3>'
Line 4564  sub render { Line 5059  sub render {
             .'<th>'.$PageLayout.'</th>'              .'<th>'.$PageLayout.'</th>'
             .'<th>'.$NumberOfColumns.'</th>'              .'<th>'.$NumberOfColumns.'</th>'
             .'<th>'.$PaperType.'</th>'              .'<th>'.$PaperType.'</th>'
             .'<th>'.$pdfFormLabel.'</th>'  
             .&Apache::loncommon::end_data_table_header_row()              .&Apache::loncommon::end_data_table_header_row()
             .&Apache::loncommon::start_data_table_row()              .&Apache::loncommon::start_data_table_row()
     .'<td>'      .'<td>'
Line 4605  sub render { Line 5099  sub render {
     $result .= <<HTML;      $result .= <<HTML;
         </select>          </select>
     </td>      </td>
     <td align='center'>  
         <select name='${var}.pdfFormFields'>  
             <option selected="selected" value="no">$without</option>  
             <option value="yes">$with</option>  
         </select>  
     </td>  
 HTML  HTML
     $result.=&Apache::loncommon::end_data_table_row()      $result.=&Apache::loncommon::end_data_table_row()
             .&Apache::loncommon::end_data_table();              .&Apache::loncommon::end_data_table();
Line 4856  sub postprocess { Line 5344  sub postprocess {
     }      }
 }  }
   
   
   
 __END__  __END__
   
Removed from v.1.591  
changed lines
  Added in v.1.627.2.14

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>