loncom/interface/lonprintout.pm - diff

Return to lonprintout.pm CVS log

Up to [LON-CAPA] / loncom / interface

Diff for /loncom/interface/lonprintout.pm between versions 1.580 and 1.639

-version 1.580, 2010/05/24 21:56:00
+version 1.639, 2014/02/08 23:49:12
  Line 1
- #
  # The LearningOnline Network
  # Printout
  #
- Line 41  use Apache::admannotations;
+ Line 40  use Apache::admannotations;
  use Apache::lonenc;
  use Apache::entities;
  use Apache::londefdef;
+ # use Apache::structurelags;	# for language management.
  use File::Basename;
  use HTTP::Response;
  use LONCAPA::map();
- use POSIX qw(strftime);
  use Apache::lonlocal;
  use Carp;
  use LONCAPA;
  my %perm;
  my %parmhash;
  my $resources_printed;
- Line 76  my $font_size = 'normalsize'; # Default
+ Line 75  my $font_size = 'normalsize'; # Default
  #----------------------------  Helper helpers. -------------------------
- #  Returns the text needd for a student chooser.
+ ##
+ # Filter function to determine if a resource is a printable sequence.
+ #
+ # @param $res -Resource to check.
+ #
+ # @return 1 - printable and a resource
+ #         0 - either notm a sequence or not printable.
+ #
+ sub printable_sequence {
+     my $res = shift;
+     # Non-sequences are not listed:
+     if (!$res->is_sequence()) {
+ 	return 0;
+     }
+     # Person with pav or pfo can always print:
+     if ($perm{'pav'} || $perm{'pfo'}) {
+ 	return 1;
+     }
+     if ($res->is_sequence()) {
+ 	my $symb = $res->symb();
+ 	my $navmap   = $res->{NAV_MAP};
+ 	# Find the first resource in the map:
+ 	my $iterator = $navmap->getIterator($res, undef, undef, 1, 1);
+ 	my $first    = $iterator->next();
+ 	while (1) {
+ 	    if ($first == $iterator->END_ITERATOR) { last; }
+ 	    if (ref($first) && ! $first->is_sequence()) {last; }
+ 	    $first = $iterator->next();
+ 	}
+ 	# Might be an empty map:
+ 	if (!ref($first)) {
+ 	    return 0;
+ 	}
+ 	my $partsref = $first->parts();
+ 	my @parts    = @$partsref;
+ 	my ($open, $close) = $navmap->map_printdates($first, $parts[0]);
+ 	return &printable($open, $close);
+     }
+     return 0;
+ }
+ # BZ5209:
+ #    Create the states needed to run the helper for incomplete problems from
+ #    the current folder for selected students.
+ #    This includes:
+ #    -  A resource selector limited to problems (incompleteness must be
+ #       calculated on a student per student basis.
+ #    -  A student selector.
+ #    -  Tie in to the FORMAT of the print job.
+ #
+ # States:
+ #   CHOOSE_INCOMPLETE_PEOPLE_SEQ      - Resource selection.
+ #   CHOOSE_STUDENTS_INCOMPLETE        - Student selection.
+ #   CHOOSE_STUDENTS_INCOMPLETE_FORMAT - Format selection
+ # Parameters:
+ #    helper - the helper which already contains info about the current folder we can
+ #             purloin.
+ #    url    - Top url of the sequence
+ # Return:
+ #     XML that can be parsed by the helper to drive the state machine.
+ #
+ sub create_incomplete_folder_selstud_helper {
+     my ($helper, $map)  = @_;
+     my $symbFilter = '$res->shown_symb()';
+     my $selFilter   = '$res->is_problem()';
+     my $resource_chooser = &generate_resource_chooser('CHOOSE_INCOMPLETE_PEOPLE_SEQ',
+ 						      'Select problem(s) to print',
+ 						      'multichoice="1" toponly="1" addstatus="1" closeallpages="1"',
+ 						      'RESOURCES',
+ 						      'CHOOSE_STUDENTS_INCOMPLETE',
+ 						      $map,
+ 						      $selFilter,
+ 						      '',
+ 						      $symbFilter,
+ 						      '');
+     my $student_chooser = &generate_student_chooser('CHOOSE_STUDENTS_INCOMPLETE',
+ 						 'student_sort',
+ 						 'STUDENTS',
+ 						 'CHOOSE_STUDENTS_INCOMPLETE_FORMAT');
+     my $format_chooser = &generate_format_selector($helper,
+ 						'Format of the print job',
+ 						'CHOOSE_STUDENTS_INCOMPLETE_FORMAT'); # end state.
+     return $resource_chooser . $student_chooser . $format_chooser;
+ }
+ # BZ 5209
+ #     Create the states needed to run the helper for incomplete problems from
+ #     the current folder for selected students.
+ #     This includes:
+ #     - A resource selector limited to problems.  (incompleteness must be calculated
+ #       on a student per student basis.
+ #     - A student selector.
+ #     - Tie in to format for the print job.
+ # States:
+ #    INCOMPLETE_PROBLEMS_COURSE_RESOURCES - Resource selector.
+ #    INCOMPLETE_PROBLEMS_COURSE_STUDENTS  - Student selector.
+ #    INCOMPLETE_PROBLEMS_COURSE_FORMAT    - Format selection.
+ #
+ # Parameters:
+ #   helper   - Helper we are creating states for.
+ # Returns:
+ #   Text that can be parsed by the helper.
+ #
+ sub create_incomplete_course_helper {
+     my $helper = shift;
+     my $filter = '$res->is_problem() || $res->contains_problem() || $res->is_sequence() || $res->is_practice())';
+     my $symbfilter = '$res->shown_symb()';
+     my $resource_chooser = &generate_resource_chooser('INCOMPLETE_PROBLEMS_COURSE_RESOURCES',
+ 						      'Select problem(s) to print',
+ 						      'multichoice = "1" suppressEmptySequences="0" addstatus="1" closeallpagtes="1"',
+ 						      'RESOURCES',
+ 						      'INCOMPLETE_PROBLEMS_COURSE_STUDENTS',
+ 						      '',
+ 						      $filter,
+ 						      '',
+ 						      $symbfilter,
+ 						      '');
+     my $people_chooser  = &generate_student_chooser('INCOMPLETE_PROBLEMS_COURSE_STUDENTS',
+ 						    'student_sort',
+ 						    'STUDENTS',
+ 						    'INCOMPLETE_PROBLEMS_COURSE_FORMAT');
+     my $format = &generate_format_selector($helper,
+ 					   'Format of the print job',
+ 					   'INCOMPLETE_PROBLEMS_COURSE_FORMAT'); # end state.
+     return $resource_chooser . $people_chooser . $format;
+ }
+ # BZ5209
+ #   Creates the states needed to run the print helper for a student
+ #   that wants to print his incomplete problems from the current folder.
+ # Parameters:
+ #   $helper - helper we are generating states for.
+ #   $map    - The map for which the student wants incomplete problems.
+ # Returns:
+ #   XML that defines the helper states being created.
+ #
+ # States:
+ #   CHOOSE_INCOMPLETE_SEQ  - Resource selector.
+ #
+ sub create_incomplete_folder_helper {
+     my ($helper, $map) = @_;
+     my $filter    = '$res->is_problem()';
+     $filter      .= ' && $res->resprintable() ';
+     $filter      .= ' && $res->is_incomplete() ';
+     my $symfilter = '$res->shown_symb()';
+     my $resource_chooser = &generate_resource_chooser('CHOOSE_INCOMPLETE_SEQ',
+ 						      'Select problem(s) to print',
+ 						      'multichoice="1", toponly ="1", addstatus="1", closeallpages="1"',
+ 						      'RESOURCES',
+ 						      'PAGESIZE',
+ 						      $map,
+ 						      $filter, '',
+ 						      $symfilter,
+ 						      '');
+     return $resource_chooser;
+ }
+ #  Returns the text neded for a student chooser.
  #  that text must still be parsed by the helper xml parser.
  # Parameters:
  #   this_state   - State name of the chooser.
- Line 164  CHOOSE_RESOURCES
+ Line 352  CHOOSE_RESOURCES
        </resource>
      </state>
  CHOOSE_RESOURCES
      return $result;
  }
  #
- Line 217  sub generate_code_selector {
+ Line 404  sub generate_code_selector {
      <message></td><td></message>
      <string variable="ANON_CODE_STORAGE_NAME" maxlength="50" size="20" />
      <message></td></tr><tr><td></message>
-     <message><b>Bubble sheet type:</b></message>
+     <message><b>Bubblesheet type:</b></message>
      <message></td><td></message>
      <dropdown variable="CODE_OPTION" multichoice="0" allowempty="0">
      $bubble_types
- Line 256  CHOOSE_ANON1
+ Line 443  CHOOSE_ANON1
     return $result;
  }
+ #  Returns the XML for choosing how assignments are to be formatted
+ #  that text must still be parsed by the helper xml parser.
+ # Parameters: 3 (required)
+ #   helper       - The helper; $helper->{'VARS'}->{'PRINT_TYPE'} used
+ #                  to check if splitting PDFs by section can be offered.
+ #   title        - Title for the current state.
+ #   this_state   - State name of the chooser.
+ sub generate_format_selector {
+     my ($helper,$title,$this_state) = @_;
+     my $secpdfoption;
+     unless (($helper->{'VARS'}->{'PRINT_TYPE'} eq 'problems_for_anon')     ||
+             ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'problems_for_anon_page') ||
+             ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'resources_for_anon')  ) {
+         $secpdfoption =  '<choice computer="sections">Each PDF contains exactly one section</choice>';
+     }
+     return <<RESOURCE_SELECTOR;
+     <state name="$this_state" title="$title">
+     <message><br /><big><i><b>How should the results be printed?</b></i></big><br /></message>
+     <choices variable="EMPTY_PAGES">
+       <choice computer='0'>Start each student\'s assignment on a new page/column (add a pagefeed after each assignment)</choice>
+       <choice computer='1'>Add one empty page/column after each student\'s assignment</choice>
+       <choice computer='2'>Add two empty pages/column after each student\'s assignment</choice>
+       <choice computer='3'>Add three empty pages/column after each student\'s assignment</choice>
+     </choices>
+     <nextstate>PAGESIZE</nextstate>
+     <message><hr width='33%' /><b>How do you want assignments split into PDF files? </b></message>
+     <choices variable="SPLIT_PDFS">
+        <choice computer="all">All assignments in a single PDF file</choice>
+        $secpdfoption
+        <choice computer="oneper">Each PDF contains exactly one assignment</choice>
+        <choice computer="usenumber" relatedvalue="NUMBER_TO_PRINT">
+             Specify the number of assignments per PDF:</choice>
+     </choices>
+     </state>
+ RESOURCE_SELECTOR
+ }
  #-----------------------------------------------------------------------
+ # Computes an open and close date from a list of open/close dates for a resource's
+ # parts.
+ #
+ # @param \@opens - reference to an array of open dates.
+ # @param \@closes - reference to an array of close dates.
+ #
+ # @return ($open, $close)
+ #
+ # @note If open/close dates are not defined they will be returned as undef
+ # @note It is possible for there to be no overlap in which case -1,-1
+ #       will be returned.
+ # @note The algorithm used is to take the latest open date and the earliest end date.
+ #
+ sub compute_open_window {
+     my ($opensref, $closesref) = @_;
+     my @opens   = @$opensref;
+     my @closes  = @$closesref;
+     # latest open date:
+     my $latest_open;
+     foreach my $open (@opens) {
+ 	if (!defined($latest_open) || ($open > $latest_open)) {
+ 	    $latest_open = $open;
+ 	}
+     }
+     # Earliest close:
+     my $earliest_close;
+     foreach my $close (@closes) {
+ 	if (!defined($earliest_close) || ($close < $earliest_close)) {
+ 	    $earliest_close = $close;
+ 	}
+     }
+     # If no overlap...both are -1 as promised.
+     if (($earliest_close ne '') && ($latest_open ne '')
+ 	 && ($earliest_close < $latest_open)) {
+ 	$latest_open  = -1;
+ 	$earliest_close = -1;
+     }
+     return ($latest_open, $earliest_close);
+ }
+ ##
+ #  Determines if 'now' is within the set of printable dates.
+ #
+ #  @param $open_date - Starting date/timestamp.
+ #  @param $close_date - Ending date/timestamp.
+ #
+ #  @return 0 - Not open.
+ #  @return 1 - open.
+ #
+ sub printable {
+     my ($open_date, $close_date) = @_;
+     my $now = time();
+     # Have to do a bit of fancy footwork around undefined open/close dates:
+     if ($open_date && ($open_date > $now)) {
+ 	return 0;
+     }
+     if ($close_date && ($close_date < $now)) {
+ 	return 0;
+     }
+     return 1;
+ }
+ ##
+ # Returns the innermost print start/print end dates for a resource.
+ # This is done by looking at the start/end dates for its parts and choosing
+ # the intersection of those dates.
+ #
+ # @param res - lonnvamaps::resource object that represents the resource.
+ #
+ # @return (opendate, closedate)
+ #
+ # @note If open/close dates are not defined they will be returned as undef
+ # @note It is possible for there to be no overlap in which case -1,-1
+ #       will be returned.
+ # @note The algorithm used is to take the latest open date and the earliest end date.
+ #       For consistency with &printable() in lonnavmaps.pm determination of start
+ #       date for printing checks printstartdate param first, then, if not set,
+ #       opendate param, then, if not set, contentopen param.
+ sub get_print_dates {
+     my $res = shift;
+     my $partsref = $res->parts();
+     my @parts;
+     if (ref($partsref) eq 'ARRAY') {
+         @parts   = @{$partsref};
+     }
+     my $open_date;
+     my $close_date;
+     my @open_dates;
+     my @close_dates;
+     if (@parts) {
+ 	foreach my $part (@parts) {
+ 	    my $partopen  = $res->parmval('printstartdate', $part);
+ 	    my $partclose = $res->parmval('printenddate',  $part);
+             if (!$partopen) {
+                 $partopen = $res->parmval('opendate',$part);
+             }
+             if (!$partopen) {
+                 $partopen = $res->parmval('contentopen',$part);
+             }
+             if ($partopen) {
+                 push(@open_dates, $partopen);
+             }
+             if ($partclose) {
+                 push(@close_dates, $partclose);
+             }
+ 	    push(@open_dates, $partopen);
+ 	    push(@close_dates, $partclose);
+ 	}
+     }
+     ($open_date, $close_date)  = &compute_open_window(\@open_dates, \@close_dates);
+     return ($open_date, $close_date);
+ }
+ ##
+ # Get the dates for which a course says a resource can be printed.  This is like
+ # get_print_dates but namvaps::course_print_dates are gotten...and not converted
+ # to times either.
+ #
+ # @param $res - Reference to a resource has from lonnvampas::resource.
+ #
+ # @return (opendate, closedate)
+ #
+ sub course_print_dates {
+     my $res = shift;
+     my $partsref = $res->parts();
+     my @parts    = @$partsref;
+     my $open_date;
+     my $close_date;
+     my @open_dates;
+     my @close_dates;
+     my $navmap = $res->{NAV_MAP}; # Slightly OO dirty.
+     # Don't bother looping over undefined or empty parts arraY;
+     if (@parts) {
+ 	foreach my $part (@parts) {
+ 	    my ($partopen, $partclose) = $navmap->course_printdates($res, $part);
+ 	    push(@open_dates, $partopen);
+ 	    push(@close_dates, $partclose);
+ 	}
+ 	($open_date, $close_date) = &compute_open_window(\@open_dates, \@close_dates);
+     }
+     return ($open_date, $close_date);
+ }
+ ##
+ # Same as above but for the enclosing map:
+ #
+ sub map_print_dates {
+     my $res = shift;
+     my $partsref = $res->parts();
+     my @parts    = @$partsref;
+     my $open_date;
+     my $close_date;
+     my @open_dates;
+     my @close_dates;
+     my $navmap = $res->{NAV_MAP}; # slightly OO dirty.
+     # Don't bother looping over undefined or empty parts arraY;
+     if (@parts) {
+ 	foreach my $part (@parts) {
+ 	    my ($partopen, $partclose) = $navmap->map_printdates($res, $part);
+ 	    push(@open_dates, $partopen);
+ 	    push(@close_dates, $partclose);
+ 	}
+ 	($open_date, $close_date) = &compute_open_window(\@open_dates, \@close_dates);
+     }
+     return ($open_date, $close_date);
+ }
+ # Determine if a resource is incomplete given the map:
+ # Parameters:
+ #   $username - Name of user for whom we are checking.
+ #   $domain   - Domain of user we are checking.
+ #   $map - map name.
+ # Returns:
+ #     0 - map is not incomplete.
+ #     1 - map is incomplete.
+ #
+ sub incomplete {
+     my ($username, $domain, $map) = @_;
+     my $navmap = Apache::lonnavmaps::navmap->new($username, $domain);
+     if (defined($navmap)) {
+ 	my $res = $navmap->getResourceByUrl($map);
+ 	my $result = $res->is_incomplete();
+ 	return $result;
+     } else {
+ 	return 1;
+     }
+ }
+ #
+ #  When printing for students, the resoures and order of the
+ #  resources may need to be altered if there are folders with
+ #  random selectiopn or random ordering (or both) enabled.
+ #  This sub computes the set of resources to print for a student
+ #  modified both by random ordering and selection and filtered
+ #  to only those that are in the original set selcted to be printed.
+ #
+ # Parameters:
+ #   $map - The URL of the folder being printed.
+ #          Used to determine which startResource and finishResource
+ #          to use when using the navmap's getIterator method.
+ #   $seq   - The original set of resources to print.
+ #            (really an array of resource names (array of symb's).
+ #   $who   - Student/domain for whome the sequence will be generated.
+ #   $code  - CODE being printed when printing Problems/Resources
+ #            from folder for CODEd assignments
+ #
+ # Implicit inputs:
+ #   $
+ # Returns:
+ #   reference to an array of resources that can be passed to
+ #   print_resources.
+ #
+ sub master_seq_to_person_seq {
+     my ($map, $seq, $who, $code, $nohidemap) = @_;
+     my ($username, $userdomain, $usersection) = split(/:/, $who);
+     # Toss the sequence up into a hash so that we have O(1) lookup time.
+     # on the items that come out of the user's list of resources.
+     #
+     my %seq_hash = map {$_  => 1} @$seq;
+     my @output_seq;
+     my $unhidden;
+     if ($perm{'pav'} && $perm{'vgr'} && $nohidemap) {
+         $unhidden = &Apache::lonnet::clutter($map);
+     }
+     my $navmap           = Apache::lonnavmaps::navmap->new($username, $userdomain,
+                                                            $code, $unhidden);
+     my ($start,$finish);
+     if ($map) {
+         my $mapres = $navmap->getResourceByUrl($map);
+         if ($mapres->is_map()) {
+             $start = $mapres->map_start();
+             $finish = $mapres->map_finish();
+         }
+     }
+     unless ($start && $finish) {
+         $start = $navmap->firstResource();
+         $finish = $navmap->finishResource();
+     }
+     my $iterator         = $navmap->getIterator($start,$finish,{},1);
+     #  Iterate on the resource..select the items that are randomly selected
+     #  and that are in the seq_has.  Presumably the iterator will take care
+     # of the random ordering part of the deal.
+     #
+     my $curres;
+     while ($curres = $iterator->next()) {
+ 	#
+ 	#  Only process resources..that are not removed by randomout...
+ 	#  and are selected for printint as well.
+ 	#
+         if (ref($curres) && ! $curres->randomout()) {
+             my $currsymb = $curres->symb();
+             if (exists($seq_hash{$currsymb})) {
+                 push(@output_seq, $currsymb);
+ 	    }
+ 	}
+     }
+     return \@output_seq;		# for now.
+ }
  # Fetch the contents of a resource, uninterpreted.
  # This is used here to fetch a latex file to be included
- Line 360  sub include_pdf {
+ Line 883  sub include_pdf {
      # (unlikely).  If it did exist, add the pdf to the set of files/images that
      # need tob e converted for this print job:
-     $file =~ s|(.*)/res/|/home/httpd/html/res/|;
+     my $londocroot = $Apache::lonnet::perlvar{'lonDocRoot'};
+     $file =~ s{(.*)/res/}{$londocroot/res/};
-     open(FILE,">>/home/httpd/prtspool/$env{'user.name'}_$env{'user.domain'}_printout.dat");
+     open(FILE,">>$Apache::lonnet::perlvar{'lonPrtDir'}/$env{'user.name'}_$env{'user.domain'}_printout.dat");
      print FILE ("$file\n");
      close (FILE);
- Line 385  sub include_pdf {
+ Line 909  sub include_pdf {
  }
+ ##
+ #  Collect the various \select_language{language_name}
+ #  latex tags to build a \usepackage[lang-list]{babel} which will
+ #  appear just prior to the \begin{document} at the front of the concatenated
+ #  set of resources:
+ # @param doc - The string of latex to search/replace.
+ # @return string
+ # @retval - the modified document stringt.
+ #
+ sub collect_languages {
+     my $doc = shift;
+     my %languages;
+     while ($doc =~ /\\selectlanguage{(\w+)}/mg) {
+ 	$languages{$1} = 1;	# allows us to request each language exactly once.
+     }
+     my @lang_list = (keys(%languages)); # List of unique languages
+     if (scalar @lang_list) {
+ 	my $babel_header = '\usepackage[' . join(',', @lang_list) .']{babel}'. "\n";
+ 	$doc =~ s/\\begin{document}/$babel_header\\begin{document}/;
+     }
+     return $doc;
+ }
+ #-------------------------------------------------------------------
  #
  #   ssi_with_retries- Does the server side include of a resource.
- Line 432  sub ssi_with_retries {
+ Line 978  sub ssi_with_retries {
  	$ssi_last_error_resource = $resource;
  	$ssi_last_error          = $response->code . " " . $response->message;
          $content='\section*{!!! An error occurred !!!}';
- 	&Apache::lonnet::logthis("Error in SSI resource: $resource Error: $ssi_last_error");
      }
      return $content;
- Line 448  sub get_student_view_with_retries {
+ Line 993  sub get_student_view_with_retries {
          $ssi_last_error_resource = $curresline.' for user '.$username.':'.$userdomain;
          $ssi_last_error          = $response->code . " " . $response->message;
          $content='\section*{!!! An error occurred !!!}';
-         &Apache::lonnet::logthis("Error in SSI (student view) resource: $curresline Error: $ssi_last_error User: $username:$userdomain");
      }
      return $content;
- Line 565  sub format_page_header {
+ Line 1109  sub format_page_header {
      # there is '\\ \\ ' in the page header. That's cause a error in LaTeX
      if($format =~ /\\\\\s\\\\\s/) {
          #TODO find sensible caption for page header
-         my $testPrintout = '\\\\'.&mt('Construction Space').' \\\\'.&mt('Test-Printout ');
+         my $testPrintout = '\\\\'.&mt('Authoring Space').' \\\\'.&mt('Test-Printout ');
          $format =~ s/\\\\\s\\\\\s/$testPrintout/;
      }
      #
- Line 703  sub is_code_valid {
+ Line 1247  sub is_code_valid {
      }
  }
+ #
+ # Compare two students by section (Used to sort by section).
+ #
+ #  Implicit inputs,
+ #    $a - The first one
+ #    $b - The second one.
+ #
+ #  Returns:
+ #     a-section cmp b-section
+ #
+ sub compare_sections {
+     my ($u1, $d1, $s1, $n1, $stat1) = split(/:/, $a);
+     my ($u2, $d2, $s2, $n2, $stat2) = split(/:/, $b);
+     return $s1 cmp $s2;
+ }
  #   Compare two students by name.  The students are in the form
  #   returned by the helper:
- Line 1511  sub unsupported {
+ Line 2071  sub unsupported {
      my $result.= &print_latex_header($mode);
      if ($currentURL=~m|^(/adm/wrapper/)?ext/|) {
  	$currentURL=~s|^(/adm/wrapper/)?ext/|http://|;
+         $currentURL=~s|^http://https://|https://|;
  	my $title=&Apache::lonnet::gettitle($symb);
  	$title = &Apache::lonxml::latex_special_symbols($title);
  	$result.=' \strut \\\\ '.$title.' \strut \\\\ '.$currentURL.' ';
- Line 1536  sub map_laystyle {
+ Line 2097  sub map_laystyle {
  sub print_page_in_course {
      my ($helper, $rparmhash, $currentURL, $resources) = @_;
      my %parmhash       = %$rparmhash;
      my @page_resources = @$resources;
      my $mode = $helper->{'VARS'}->{'LATEX_TYPE'};
- Line 1560  sub print_page_in_course {
+ Line 2122  sub print_page_in_course {
  	my $title=&Apache::lonnet::gettitle($symb);
  	$title = &Apache::lonxml::latex_special_symbols($title);
      } else {
- 	$result.=$currentURL;
+         my $esc_currentURL= $currentURL;
+         $esc_currentURL =~ s/_/\\_/g;
+ 	$result.=$esc_currentURL;
      }
      $result .= '\\\\';
- Line 1587  sub print_page_in_course {
+ Line 2151  sub print_page_in_course {
  	    my @page_resources = $navmap->retrieveResources($resource_src);
  	    $result           .= &print_page_in_course($helper, $rparmhash,
  						       $resource_src, \@page_resources);
+         } elsif ($resource->ext()) {
+             $result .= &unsupported($currentURL,$mode,$symb);
  	}
  	# these resources go through the XML transformer:
- 	elsif ($resource_src =~ /\.(problem|exam|quiz|assess|survey|form|library|page|xml|html|htm|xhtml|xhtm)$/)  {
+ 	elsif ($resource_src =~ /\.(problem|exam|quiz|assess|survey|form|library|xml|html|htm|xhtml|xhtm)$/)  {
  	    my $urlp = &Apache::lonnet::clutter($resource_src);
  	    my %form;
  	    my %moreenv;
- Line 1653  sub print_page_in_course {
+ Line 2221  sub print_page_in_course {
  			$texversion.='\vskip 0 mm \noindent\textbf{'.$title.'}\vskip 0 mm ';
  			$texversion.=&path_to_problem($urlp,$LaTeXwidth);
  		    } else {
- 			$texversion.='\vskip 0 mm \noindent\textbf{Prints from construction space - there is no title.}\vskip 0 mm ';
+ 			$texversion.='\vskip 0 mm \noindent\textbf{'.
- 			my $URLpath=$urlp;
+                         &mt("Printing from Authoring Space: No Title").'}\vskip 0 mm ';
- 			$URLpath=~s/~([^\/]+)/public_html\/$1\/$1/;
+ 			$texversion.=&path_to_problem($urlp,$LaTeXwidth);
- 			$texversion.=&path_to_problem($URLpath,$LaTeXwidth);
  		    }
  		    $texversion.='\vskip 1 mm '.$answer.'\end{document}';
  		}
- Line 1705  sub print_page_in_course {
+ Line 2272  sub print_page_in_course {
  # List of recently generated print files
  #
  sub recently_generated {
-     my $r=shift;
+     my ($prtspool) = @_;
-     my $prtspool=$r->dir_config('lonPrtDir');
+     my $output;
      my $zip_result;
      my $pdf_result;
      opendir(DIR,$prtspool);
- Line 1739  sub recently_generated {
+ Line 2306  sub recently_generated {
  	if ($ext eq 'zip') { $zip_result .= $result; }
      }
      if ($zip_result || $pdf_result) {
-         $r->print('<hr />');
+         $output ='<hr />';
      }
      if ($zip_result) {
- 	$r->print('<h3>'.&mt('Recently generated printout zip files')."</h3>\n"
+ 	$output .='<h3>'.&mt('Recently generated printout zip files')."</h3>\n"
                    .&Apache::loncommon::start_data_table()
                    .&Apache::loncommon::start_data_table_header_row()
                    .'<th>'.&mt('Download').'</th>'
- Line 1750  sub recently_generated {
+ Line 2317  sub recently_generated {
                    .'<th>'.&mt('File Size (Bytes)').'</th>'
                    .&Apache::loncommon::end_data_table_header_row()
                    .$zip_result
-                   .&Apache::loncommon::end_data_table()
+                   .&Apache::loncommon::end_data_table();
-         );
      }
      if ($pdf_result) {
- 	$r->print('<h3>'.&mt('Recently generated printouts')."</h3>\n"
+ 	$output .='<h3>'.&mt('Recently generated printouts')."</h3>\n"
                    .&Apache::loncommon::start_data_table()
                    .&Apache::loncommon::start_data_table_header_row()
                    .'<th>'.&mt('Download').'</th>'
- Line 1762  sub recently_generated {
+ Line 2328  sub recently_generated {
                    .'<th>'.&mt('File Size (Bytes)').'</th>'
                    .&Apache::loncommon::end_data_table_header_row()
                    .$pdf_result
-                   .&Apache::loncommon::end_data_table()
+                   .&Apache::loncommon::end_data_table();
-         );
      }
+     return $output;
  }
  #
- Line 1924  sub set_form_extraspace {
+ Line 2490  sub set_form_extraspace {
  #
  sub print_construction_sequence {
      my ($currentURL, $helper, %form, $LaTeXwidth) = @_;
      my $result;
      my $rndseed=time;
      if ($helper->{'VARS'}->{'curseed'}) {
  	$rndseed=$helper->{'VARS'}->{'curseed'};
      }
-     my $errtext=&LONCAPA::map::mapread($currentURL);
+     my $errtext=&LONCAPA::map::mapread(&Apache::lonnet::filelocation('',$currentURL));
      #
      #  These make this all support recursing for subsequences.
      #
      my @order    = @LONCAPA::map::order;
      my @resources = @LONCAPA::map::resources;
      for (my $member=0;$member<=$#order;$member++) {
  	$resources[$order[$member]]=~/^([^:]*):([^:]*):/;
  	my $urlp=$2;
- Line 1950  sub print_construction_sequence {
+ Line 2519  sub print_construction_sequence {
  	    }
  	    if((($helper->{'VARS'}->{'ANSWER_TYPE'} eq 'no') ||
  		($helper->{'VARS'}->{'ANSWER_TYPE'} eq 'only')) &&
- 	       ($urlp=~/\.(problem|exam|quiz|assess|survey|form|library|page)$/)) {
+ 	       ($urlp=~/$LONCAPA::assess_page_re/)) {
  		#  Don't permanently modify %$form...
  		my %answerform = %form;
  		$answerform{'grade_target'}='answer';
- Line 1994  sub print_construction_sequence {
+ Line 2563  sub print_construction_sequence {
  	    # IF sequence, recurse:
  	    if ($urlp =~ /\.sequence$/) {
- 		my $sequence_url = $urlp;
+ 		$result .= &print_construction_sequence($urlp,
- 		my $domain       = $env{'user.domain'};	# Constr. space only on local
- 		my $user         = $env{'user.name'};
- 		$sequence_url    =~ s/^\/res\/$domain/\/home/;
- 		$sequence_url    =~ s/^(\/home\/$user)/$1\/public_html/;
- #		$sequence_url    =~ s|\/~([^\/]+)\/|\/home\/$1\/public_html\/|;
- 		$result .= &print_construction_sequence($sequence_url,
  							$helper, %form,
  							$LaTeXwidth);
  	    }
- Line 2025  sub print_construction_sequence {
+ Line 2587  sub print_construction_sequence {
      return $result;
  }
+ #
+ #  Top level for generating print output.
+ #
+ #  May call print_resources if multiple resources will be printed.
+ #
+ #  The main driver is $selectionmade which reflects the type of print out
+ #  requested:
+ #   Value    Print type:
+ #   1        Print resource that's being looked at.
+ #   2        Print problems in a map or in a page.
+ #   3        Print pages in a map or resources in a page.
+ #   4        Print all problems  or all resources.
+ #   5        Print problems for seleted students.
+ #   6        Print selected problems from a folder.
+ #   7        Print print selected resources from some scope.
+ #   8        Print resources for selected students.
+ #
+ #BZ 5209
+ #   2        map_incomplete_problems_seq Print incomplete problems from the current
+ #            folder in student context.
+ #   5      map_incomplete_problems_people_seq Print incomplete problems from the
+ #            current folder in privileged context.
+ #    5      incomplete_problems_selpeople_course Print incomplete problems for
+ #            selected people from the entire course.
+ #
+ #   Item 101 has much the same processing as 8,
+ #
+ #  Differences:  Item 101, 102 require per-student filtering of the resource
+ #  set so that only the incomplete resources are printed.
+ #  For item 100, filtering was done at the helper level.
  sub output_data {
      my ($r,$helper,$rparmhash) = @_;
      my %parmhash = %$rparmhash;
      $ssi_error = 0;		# This will be set nonzero by failing ssi's.
      $resources_printed = '';
      $font_size = $helper->{'VARS'}->{'fontsize'};
+     my $print_type = $helper->{'VARS'}->{'PRINT_TYPE'}; # Allows textual simplification.
      my $do_postprocessing = 1;
      my $js = <<ENDPART;
  <script type="text/javascript">
- Line 2080  ENDPART
+ Line 2675  ENDPART
      $env{'form.pagebreaks'}  = $helper->{'VARS'}->{'FINISHPAGE'};
      &set_form_extraspace($helper);
-     $env{'form.lastprinttype'} = $helper->{'VARS'}->{'PRINT_TYPE'};
+     $env{'form.lastprinttype'} = $print_type;
      &Apache::loncommon::store_course_settings('print',
  					      {'pagebreaks'    => 'scalar',
  					       'extraspace'    => 'scalar',
- Line 2130  ENDPART
+ Line 2725  ENDPART
  	&Apache::lonnet::delenv('construct.style');
      }
+     if ($print_type eq 'current_document') {
-     if ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'current_document') {
        #-- single document - problem, page, html, xml, ...
  	my ($currentURL,$cleanURL);
- Line 2142  ENDPART
+ Line 2736  ENDPART
  	} else {
              #prints resource from the construction space
- 	    $currentURL='/'.$helper->{'VARS'}->{'filename'};
+ 	    $currentURL=$helper->{'VARS'}->{'filename'};
- 	    if ($currentURL=~/([^?]+)/) {$currentURL=$1;}
  	    $cleanURL=$currentURL;
  	}
  	$selectionmade = 1;
  	if ($cleanURL!~m|^/adm/|
  	    && $cleanURL=~/\.(problem|exam|quiz|assess|survey|form|library|xml|html|htm|xhtml|xhtm)$/) {
  	    my $rndseed=time;
- Line 2186  ENDPART
+ Line 2780  ENDPART
  	    if(($helper->{'VARS'}->{'ANSWER_TYPE'} eq 'no') ||
  	       ($helper->{'VARS'}->{'ANSWER_TYPE'} eq 'only')) {
  		$form{'problem_split'}=$parmhash{'problem_stream_switch'};
  		$form{'grade_target'}='answer';
  		$form{'answer_output_mode'}='tex';
- Line 2207  ENDPART
+ Line 2802  ENDPART
  			$texversion.='\vskip 0 mm \noindent\textbf{'.$title.'}\vskip 0 mm ';
  			$texversion.=&path_to_problem($cleanURL,$LaTeXwidth);
  		    } else {
- 			$texversion.='\vskip 0 mm \noindent\textbf{Prints from construction space - there is no title.}\vskip 0 mm ';
+ 			$texversion.='\vskip 0 mm \noindent\textbf{'.
- 			my $URLpath=$cleanURL;
+                         &mt("Printing from Authoring Space: No Title").'}\vskip 0 mm ';
- 			$URLpath=~s/~([^\/]+)/public_html\/$1\/$1/;
- 			$texversion.=&path_to_problem($URLpath,$LaTeXwidth);
+ 			$texversion.=&path_to_problem($cleanURL,$LaTeXwidth);
  		    }
  		    $texversion.='\vskip 1 mm '.$answer.'\end{document}';
  		}
- Line 2242  ENDPART
+ Line 2837  ENDPART
  	    }
          } elsif ($cleanURL!~m|^/adm/|
  		 && $currentURL=~/\.(sequence|page)$/ && $helper->{'VARS'}->{'construction'} eq '1') {
-             #printing content of sequence from the construction space
- 	    $currentURL=~s|\/~([^\/]+)\/|\/home\/$1\/public_html\/|;
  	    $result .= &print_construction_sequence($currentURL, $helper, %form,
  						    $LaTeXwidth);
  	    $result .= '\end{document}';
- Line 2293  ENDPART
+ Line 2884  ENDPART
  	    $result.=&unsupported($currentURL,$helper->{'VARS'}->{'LATEX_TYPE'},
  				  $helper->{'VARS'}->{'symb'});
  	}
-     } elsif (($helper->{'VARS'}->{'PRINT_TYPE'} eq 'map_problems')       or
+     } elsif (($print_type eq 'map_problems')          or
- 	     ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'map_problems_in_page') or
+ 	     ($print_type eq 'map_problems_in_page')  or
- 	     ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'map_resources_in_page') or
+ 	     ($print_type eq 'map_resources_in_page') or
-              ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'map_problems_pages') or
+              ($print_type eq 'map_problems_pages')    or
-              ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'all_problems')       or
+              ($print_type eq 'all_problems')          or
- 	     ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'all_resources')      or # BUGBUG
+ 	     ($print_type eq 'all_resources')         or # BUGBUG
- 	     ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'select_sequences')
+ 	     ($print_type eq 'select_sequences')      or
- 	     ) {
+ 	     ($print_type eq 'map_incomplete_problems_seq')
+ 	     ) {
          #-- produce an output string
- 	if (($helper->{'VARS'}->{'PRINT_TYPE'} eq 'map_problems')  or
+ 	if (($print_type eq 'map_problems')                or
- 	    ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'map_problems_in_page') ) {
+ 	    ($print_type eq 'map_incomplete_problems_seq') or
+ 	    ($print_type eq 'map_problems_in_page') ) {
  	    $selectionmade = 2;
- 	} elsif (($helper->{'VARS'}->{'PRINT_TYPE'} eq 'map_problems_pages') or
+ 	} elsif (($print_type eq 'map_problems_pages') or
- 		 ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'map_resources_in_page'))
+ 		 ($print_type eq 'map_resources_in_page'))
  	{
  	    $selectionmade = 3;
- 	} elsif (($helper->{'VARS'}->{'PRINT_TYPE'} eq 'all_problems')
+ 	} elsif (($print_type eq 'all_problems')
  		 ) {
  	    $selectionmade = 4;
- 	} elsif ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'all_resources') {  #BUGBUG
+ 	} elsif ($print_type eq 'all_resources') {  #BUGBUG
  	    $selectionmade = 4;
- 	} elsif ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'select_sequences') {
+ 	} elsif ($print_type eq 'select_sequences') {
  	    $selectionmade = 7;
  	}
  	$form{'problem_split'}=$parmhash{'problem_stream_switch'};
  	$form{'suppress_tries'}=$parmhash{'suppress_tries'};
  	$form{'latex_type'}=$helper->{'VARS'}->{'LATEX_TYPE'};
- Line 2365  ENDPART
+ Line 2958  ENDPART
  		&Apache::lonxml::remember_problem_counter();
  		if ($flag_latex_header_remove eq 'NO') {
  		    $texversion.=&print_latex_header($helper->{'VARS'}->{'LATEX_TYPE'});  # RF
- 		    $flag_latex_header_remove = 'YES';
+                     unless (($helper->{'VARS'}->{'ANSWER_TYPE'} eq 'only') ||
+                             (($i==0) &&
+                              (($urlp=~/\.page$/) ||
+                               ($print_type eq 'map_problems_in_page') ||
+                               ($print_type eq 'map_resources_in_page')))) {
+                         $flag_latex_header_remove = 'YES';
+                     }
  		}
  		$texversion.=&ssi_with_retries($urlp, $ssi_retry_count, %form);
  		if ($urlp=~/\.page$/) {
- Line 2373  ENDPART
+ Line 2972  ENDPART
  		    if ($number_of_columns_page > $number_of_columns) {$number_of_columns=$number_of_columns_page;}
  		    $texversion =~ s/\\end{document}\d*/\\end{document}/;
  		    $flag_page_in_sequence = 'YES';
  		}
  		if(($helper->{'VARS'}->{'ANSWER_TYPE'} eq 'no') ||
  		   ($helper->{'VARS'}->{'ANSWER_TYPE'} eq 'only')) {
- Line 2385  ENDPART
+ Line 2984  ENDPART
  		    &Apache::lonxml::restore_problem_counter();
  		    my $answer=&ssi_with_retries($urlp, $ssi_retry_count, %answerform);
+                     if ($urlp =~ /\.page$/) {
+                         $answer =~ s/\\end{document}(\d*)$//;
+                     }
  		    if ($helper->{'VARS'}->{'ANSWER_TYPE'} eq 'no') {
- 			$texversion=~s/(\\keephidden{ENDOFPROBLEM})/$answer$1/;
+                         if ($urlp =~ /\.page$/) {
+                             my @probs = split(/\\keephidden{ENDOFPROBLEM}/,$texversion);
+                             my $lastprob = pop(@probs);
+                             $texversion = join('\keephidden{ENDOFPROBLEM}',@probs).
+                             $answer.'\keephidden{ENDOFPROBLEM}'.$lastprob;
+                         } else {
+                             $texversion=~s/(\\keephidden{ENDOFPROBLEM})/$answer$1/;
+                         }
  		    } else {
- 			if ($urlp=~/\.(problem|exam|quiz|assess|survey|form|library)$/) {
+ 			if ($urlp=~/$LONCAPA::assess_page_re/) {
  			    $texversion=&print_latex_header($helper->{'VARS'}->{'LATEX_TYPE'});
- 			    $texversion =~ s/\\begin{document}//;
+ #			    $texversion =~ s/\\begin{document}//; # FIXME
  			    my $title = &Apache::lonnet::gettitle($master_seq[$i]);
  			    $title = &Apache::lonxml::latex_special_symbols($title);
  			    my $body ='\vskip 0 mm \noindent\textbf{'.$title.'}\vskip 0 mm ';
- Line 2427  ENDPART
+ Line 3035  ENDPART
  							  $assignment,
  							  $courseidinfo,
  							  $name);
  		    if ($numberofcolumns eq '1') {
  			$result .='\newpage \noindent\parbox{\minipagewidth}{\noindent\\lhead{'.$header_text.'}} \vskip 5 mm ';
  		    } else {
- Line 2484  ENDPART
+ Line 3091  ENDPART
  		}
  		$result .= $texversion;
  		$flag_latex_header_remove = 'YES';
  	    }
  	    if (&Apache::loncommon::connection_aborted($r)) {
  		last;
  	    }
- Line 2494  ENDPART
+ Line 3101  ENDPART
  	    $result =~ s/\\usepackage{calc}/\\usepackage{calc}\\usepackage{longtable}/;
  	}
  	$result .= '\end{document}';
-      } elsif (($helper->{'VARS'}->{'PRINT_TYPE'} eq 'problems_for_students') ||
+      } elsif (($print_type eq 'problems_for_students')           ||
- 	      ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'problems_for_students_from_page') ||
+ 	      ($print_type eq 'problems_for_students_from_page') ||
- 	      ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'all_problems_students') ||
+ 	      ($print_type eq 'all_problems_students')           ||
- 	      ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'resources_for_students')){
+ 	      ($print_type eq 'resources_for_students')          ||
+ 	      ($print_type eq 'incomplete_problems_selpeople_course') ||
+ 	      ($print_type eq 'map_incomplete_problems_people_seq')){
       #-- prints assignments for whole class or for selected students
  	 my $type;
- 	 if (($helper->{'VARS'}->{'PRINT_TYPE'} eq 'problems_for_students') ||
+ 	 if (($print_type eq 'problems_for_students')           ||
- 	     ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'problems_for_students_from_page') ||
+ 	     ($print_type eq 'problems_for_students_from_page') ||
- 	     ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'all_problems_students') ) {
+ 	     ($print_type eq 'all_problems_students')           ||
+ 	     ($print_type eq 'incomplete_problems_selpeople_course') ||
+ 	     ($print_type eq 'map_incomplete_problems_people_seq')) {
  	     $selectionmade=5;
  	     $type='problems';
- 	 } elsif ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'resources_for_students') {
+ 	 } elsif ($print_type eq 'resources_for_students') {
  	     $selectionmade=8;
  	     $type='resources';
  	 }
- Line 2524  ENDPART
+ Line 3135  ENDPART
  	 if (($helper->{'VARS'}->{'student_sort'}    eq 1)  &&
  	     ($helper->{'VARS'}->{'SPLIT_PDFS'} ne "sections")) {
  	     @students = sort compare_names  @students;
+ 	 } else {
+ 	     @students = sort compare_sections @students;
  	 }
  	 &adjust_number_to_print($helper);
- Line 2542  ENDPART
+ Line 3155  ENDPART
  	 }
  	 my @master_seq=split /\|\|\|/, $helper->{'VARS'}->{'RESOURCES'};
+          my $map;
+          if ($helper->{VARS}->{'symb'}) {
+              ($map, my $id, my $resource) =
+                  &Apache::lonnet::decode_symb($helper->{VARS}->{'symb'});
+          }
  	 #loop over students
   	 my $flag_latex_header_remove = 'NO';
- Line 2556  ENDPART
+ Line 3175  ENDPART
  	     ($helper->{'VARS'}->{'PRINT_ANNOTATIONS'} eq 'yes')) {
  	     $moreenv{'problem_split'}='yes';
  	 }
- 	 my %prog_state=&Apache::lonhtmlcommon::Create_PrgWin($r,'Print Status','Class Print Status',$#students+1,'inline','75');
+ 	 my %prog_state=&Apache::lonhtmlcommon::Create_PrgWin($r,$#students+1);
  	 my $student_counter=-1;
  	 my $i = 0;
  	 my $last_section = (split(/:/,$students[0]))[2];
  	 foreach my $person (@students) {
               my $duefile="/home/httpd/prtspool/$env{'user.name'}_$env{'user.domain'}_printout.due";
  	     if (-e $duefile) {
  		 my $temp_file = Apache::File->new('>>'.$duefile);
- Line 2577  ENDPART
+ Line 3195  ENDPART
  	     } else {
  		 $i=int($student_counter/$helper->{'VARS'}{'NUMBER_TO_PRINT'});
  	     }
+ 	     my $actual_seq = master_seq_to_person_seq($map, \@master_seq,
+                                                        $person, undef, 1);
  	     my ($output,$fullname, $printed)=&print_resources($r,$helper,
  						     $person,$type,
- 						     \%moreenv,\@master_seq,
+ 						     \%moreenv,  $actual_seq,
  						     $flag_latex_header_remove,
  						     $LaTeXwidth);
  	     $resources_printed .= ":";
  	     $print_array[$i].=$output;
  	     $student_names[$i].=$person.':'.$fullname.'_END_';
- 	     &Apache::lonhtmlcommon::Increment_PrgWin($r,\%prog_state,&mt('last student').' '.$fullname);
+ #	     &Apache::lonhtmlcommon::Increment_PrgWin($r,\%prog_state,&mt('last student').' '.$fullname);
+ 	     &Apache::lonhtmlcommon::Increment_PrgWin($r,\%prog_state,'last student');
  	     $flag_latex_header_remove = 'YES';
  	     if (&Apache::loncommon::connection_aborted($r)) { last; }
  	 }
  	 &Apache::lonhtmlcommon::Close_PrgWin($r,\%prog_state);
  	 $result .= $print_array[0].'  \end{document}';
-      } elsif (($helper->{'VARS'}->{'PRINT_TYPE'} eq 'problems_for_anon')     ||
+      } elsif (($print_type eq 'problems_for_anon')      ||
- 	      ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'problems_for_anon_page') ||
+ 	      ($print_type eq 'problems_for_anon_page') ||
- 	      ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'resources_for_anon')  ) {
+ 	      ($print_type eq 'resources_for_anon')  ) {
  	 my $cdom =$env{'course.'.$env{'request.course.id'}.'.domain'};
  	 my $cnum =$env{'course.'.$env{'request.course.id'}.'.num'};
  	 my $num_todo=$helper->{'VARS'}->{'NUMBER_TO_PRINT_TOTAL'};
- Line 2601  ENDPART
+ Line 3222  ENDPART
  	 my $old_name=$helper->{'VARS'}->{'REUSE_OLD_CODES'};
  	 my $single_code = $helper->{'VARS'}->{'SINGLE_CODE'};
  	 my $selected_code = $helper->{'VARS'}->{'CODE_SELECTED_FROM_LIST'};
  	 my $code_option=$helper->{'VARS'}->{'CODE_OPTION'};
           my @lines = &Apache::grades::get_scantronformat_file();
- 	 my ($code_type,$code_length)=('letter',6);
+ 	 my ($code_type,$code_length,$bubbles_per_row)=('letter',6,10);
  	 foreach my $line (@lines) {
- 	     my ($name,$type,$length) = (split(/:/,$line))[0,2,4];
+              chomp($line);
+ 	     my ($name,$type,$length,$bubbles_per_item) =
+                  (split(/:/,$line))[0,2,4,17];
  	     if ($name eq $code_option) {
  		 $code_length=$length;
  		 if ($type eq 'number') { $code_type = 'number'; }
+                  chomp($bubbles_per_item);
+                  if (($bubbles_per_item ne '') && ($bubbles_per_item > 0)) {
+                      $bubbles_per_row = $bubbles_per_item;
+                  }
  	     }
  	 }
+          my ($randomorder,$randompick,$map);
+          if ($helper->{VARS}{'symb'}) {
+              ($map, my $id, my $resource) =
+                  &Apache::lonnet::decode_symb($helper->{VARS}{'symb'});
+              my $navmap = Apache::lonnavmaps::navmap->new();
+              if (defined($navmap)) {
+                  if ($map) {
+                      my $mapres = $navmap->getResourceByUrl($map);
+                      $randomorder = $mapres->randomorder();
+                      $randompick = $mapres->randompick();
+                  }
+              }
+          }
  	 my %moreenv = ('textwidth' => &get_textwidth($helper,$LaTeXwidth));
  	 $moreenv{'problem_split'}    = $parmhash{'problem_stream_switch'};
           $moreenv{'instructor_comments'}='hide';
+          $moreenv{'bubbles_per_row'} = $bubbles_per_row;
  	 my $seed=time+($$<<16)+($$);
  	 my @allcodes;
  	 if ($old_name) {
- Line 2655  ENDPART
+ Line 3295  ENDPART
  	     @allcodes=keys(%allcodes);
  	 }
  	 my @master_seq=split /\|\|\|/, $helper->{'VARS'}->{'RESOURCES'};
- 	 my ($type) = split(/_/,$helper->{'VARS'}->{'PRINT_TYPE'});
+ 	 my ($type) = split(/_/,$print_type);
  	 &adjust_number_to_print($helper);
  	 my $number_per_page=$helper->{'VARS'}->{'NUMBER_TO_PRINT'};
- 	 if ($number_per_page eq '0' || $number_per_page eq 'all') {
+ 	 if ($number_per_page eq '0' || $number_per_page eq 'all'
- 	     $number_per_page=$num_todo;
+ 	     || $number_per_page eq 'section') {
+ 	     $number_per_page=$num_todo > 0 ? $num_todo : 1;
  	 }
  	 my $flag_latex_header_remove = 'NO';
- 	 my %prog_state=&Apache::lonhtmlcommon::Create_PrgWin($r,'Print Status','Class Print Status',$num_todo,'inline','75');
+ 	 my %prog_state=&Apache::lonhtmlcommon::Create_PrgWin($r,$num_todo);
  	 my $count=0;
  	 foreach my $code (sort(@allcodes)) {
  	     my $file_num=int($count/$number_per_page);
- Line 2671  ENDPART
+ Line 3312  ENDPART
  	     } else {
  		 $moreenv{'CODE'}=&num_to_letters($code);
  	     }
+              my $actual_seq = \@master_seq;
+              if ($randomorder || $randompick) {
+                  $env{'form.CODE'} = $moreenv{'CODE'};
+                  $actual_seq = master_seq_to_person_seq($map, \@master_seq,
+                                                         undef,
+                                                         $moreenv{'CODE'}, 1);
+                  delete($env{'form.CODE'});
+              }
  	     my ($output,$fullname, $printed)=
  		 &print_resources($r,$helper,'anonymous',$type,\%moreenv,
- 				  \@master_seq,$flag_latex_header_remove,
+ 				  $actual_seq,$flag_latex_header_remove,
  				  $LaTeXwidth);
  	     $resources_printed .= ":";
  	     $print_array[$file_num].=$output;
- Line 2685  ENDPART
+ Line 3334  ENDPART
  	 }
  	 &Apache::lonhtmlcommon::Close_PrgWin($r,\%prog_state);
  	 $result .= $print_array[0].'  \end{document}';
-      } elsif ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'problems_from_directory') {
+      } elsif ($print_type eq 'problems_from_directory') {
      #prints selected problems from the subdirectory
  	$selectionmade = 6;
          my @list_of_files=split /\|\|\|/, $helper->{'VARS'}->{'FILES'};
- Line 2704  ENDPART
+ Line 3353  ENDPART
  	    if ($urlp=~/\//) {
  		$form{'problem_split'}=$parmhash{'problem_stream_switch'};
  		$form{'rndseed'}=$rndseed;
- 		if ($urlp =~ m|/home/([^/]+)/public_html|) {
+ 		$urlp =~ s|^$Apache::lonnet::perlvar{'lonDocRoot'}||;
- 		    $urlp =~ s|/home/([^/]*)/public_html|/~$1|;
- 		} else {
- 		    $urlp =~ s|^$Apache::lonnet::perlvar{'lonDocRoot'}||;
- 		}
  		$resources_printed .= $urlp.':';
  		my $texversion=&ssi_with_retries($urlp, $ssi_retry_count, %form);
  		if(($helper->{'VARS'}->{'ANSWER_TYPE'} eq 'no') ||
- Line 2729  ENDPART
+ Line 3374  ENDPART
  			    $texversion.='\vskip 0 mm \noindent ';
  			    $texversion.=&path_to_problem ($urlp,$LaTeXwidth);
  			} else {
- 			    $texversion.='\vskip 0 mm \noindent\textbf{Prints from construction space - there is no title.}\vskip 0 mm ';
+ 			    $texversion.='\vskip 0 mm \noindent\textbf{'.
- 			    my $URLpath=$urlp;
+                                          &mt("Printing from Authoring Space: No Title").'}\vskip 0 mm ';
- 			    $URLpath=~s/~([^\/]+)/public_html\/$1\/$1/;
+ 			    $texversion.=&path_to_problem ($urlp,$LaTeXwidth);
- 			    $texversion.=&path_to_problem ($URLpath,$LaTeXwidth);
  			}
  			$texversion.='\vskip 1 mm '.$answer.'\end{document}';
  		    }
  		}
                  #this chunk is responsible for printing the path to problem
- 		my $newurlp=$urlp;
+ 		my $newurlp=&path_to_problem($urlp,$LaTeXwidth);
- 		if ($newurlp=~/~/) {$newurlp=~s|\/~([^\/]+)\/|\/home\/$1\/public_html\/|;}
- 		$newurlp=&path_to_problem($newurlp,$LaTeXwidth);
  		$texversion =~ s/(\\begin{minipage}{\\textwidth})/$1 $newurlp/;
  		if ($flag_latex_header_remove ne 'NO') {
  		    $texversion = &latex_header_footer_remove($texversion);
- Line 2767  ENDPART
+ Line 3409  ENDPART
      # Only post process if that has not been turned off e.g. by a raw latex resource.
      if ($do_postprocessing) {
- 	$result = &page_format_transformation($papersize,$laystyle,$numberofcolumns,$helper->{'VARS'}->{'PRINT_TYPE'},$result,$helper->{VARS}->{'assignment'},$helper->{'VARS'}->{'TABLE_CONTENTS'},$helper->{'VARS'}->{'TABLE_INDEX'},$selectionmade);
+ 	$result = &page_format_transformation($papersize,
+ 					      $laystyle,$numberofcolumns,
+ 					      $print_type,$result,
+ 					      $helper->{VARS}->{'assignment'},
+ 					      $helper->{'VARS'}->{'TABLE_CONTENTS'},
+ 					      $helper->{'VARS'}->{'TABLE_INDEX'},
+ 					      $selectionmade);
  	$result = &latex_corrections($number_of_columns,$result,$selectionmade,
  				     $helper->{'VARS'}->{'ANSWER_TYPE'});
  	#if ($numberofcolumns == 1) {
- Line 2784  ENDPART
+ Line 3432  ENDPART
      my $URLback=''; #link to original document
      if ($helper->{'VARS'}->{'construction'} eq '1') {
- 	#prints resource from the construction space
+ 	$URLback=$helper->{'VARS'}->{'filename'};
- 	$URLback='/'.$helper->{'VARS'}->{'filename'};
- 	if ($URLback=~/([^?]+)/) {
- 	    $URLback=$1;
- 	    $URLback=~s|^/~|/priv/|;
- 	}
      }
      #
      # Final adjustment of the font size:
- Line 2797  ENDPART
+ Line 3440  ENDPART
      $result = set_font_size($result);
+     # Insert any babel headers required.
+     $result       = &collect_languages($result);
  #-- writing .tex file in prtspool
      my $temp_file;
      my $identifier = &Apache::loncommon::get_cgi_id();
- Line 2924  sub print_resources {
+ Line 3572  sub print_resources {
      my ($username,$userdomain,$usersection) = split /:/,$person;
      my $fullname = &get_name($username,$userdomain);
      my $namepostfix = "\\\\";	# Both anon and not anon should get the same vspace.
-     if ($person =~ 'anon') {
- 	$namepostfix .="Name: ";
+     #
+     # Figure out if we need to filter the output by
+     # the incomplete problems for that person
+     #
+     my $print_type = $helper->{'VARS'}->{'PRINT_TYPE'};
+     my $print_incomplete = 0;
+     if (($print_type eq 'map_incomplete_problems_people_seq')   ||
+ 	($print_type eq 'incomplete_problems_selpeople_course')) {
+ 	$print_incomplete = 1;
+     }
+     if ($person eq 'anonymous') {
+ 	$namepostfix .=&mt('Name:')." ";
  	$fullname = "CODE - ".$moreenv->{'CODE'};
      }
      #  Fullname may have special latex characters that need \ prefixing:
      #
      my $i           = 0;
+     my $actually_printed = 0;	# Count of resources printed.
      #goes through all resources, checks if they are available for
      #current student, and produces output
- Line 2948  sub print_resources {
+ Line 3610  sub print_resources {
      #   so we will just rely on prntout.pl to strip  ENDOFSTUDENTSTAMP from the
      #   postscript.  Each ENDOFSTUDENTSTAMP will go on a line by itself.
      #
      my $syllabus_first = 0;
+     my $assessment_first = 0;
+     my $current_assignment = "";
+     my $assignment;
+     my $courseidinfo = &get_course();
      foreach my $curresline (@{$master_seq})  {
  	if (defined $page_breaks{$curresline}) {
  	    if($i != 0) {
- Line 2957  sub print_resources {
+ Line 3625  sub print_resources {
  	}
  	$current_output .= &get_extra_vspaces($helper, $curresline);
  	$i++;
+ 	my ($map,$id,$res_url) = &Apache::lonnet::decode_symb($curresline);
+ 	# See if we need to emit a new header:
  	if ( !($type eq 'problems' &&
- 	       ($curresline!~ m/\.(problem|exam|quiz|assess|survey|form|library)$/)) ) {
+ 	       ($curresline!~ m/$LONCAPA::assess_page_re/)) ) {
- 	    my ($map,$id,$res_url) = &Apache::lonnet::decode_symb($curresline);
+ 	    if ($print_incomplete && !&incomplete($username, $userdomain, $res_url)) {
+ 		next;
+ 	    }
+             if ((!$actually_printed) && ($curresline =~ m/$LONCAPA::assess_re/)) {
+                 $assessment_first = 1;
+             }
+ 	    $actually_printed++; # we're going to print one.
  	    if (&Apache::lonnet::allowed('bre',$res_url)) {
  		if ($res_url!~m|^ext/|
  		    && $res_url=~/\.(problem|exam|quiz|assess|survey|form|library|page|xml|html|htm|xhtml|xhtm)$/) {
- Line 2968  sub print_resources {
+ Line 3646  sub print_resources {
  		    &Apache::lonxml::remember_problem_counter();
  		    my $rendered = &get_student_view_with_retries($curresline,$ssi_retry_count,$username,$userdomain,$env{'request.course.id'},'tex',$moreenv);
+                     if ($res_url =~ /\.page$/) {
+                         if ($remove_latex_header eq 'NO') {
+                             if (!($rendered =~ /\\begin\{document\}/)) {
+                                 $rendered = &print_latex_header().$rendered;
+                             }
+                         }
+ ;
+                         if ($remove_latex_header eq 'YES') {
+                             $rendered = &latex_header_footer_remove($rendered);
+                         } else {
+                             $rendered =~ s/\\end{document}\d*//;
+                         }
+                     }
  		    if(($helper->{'VARS'}->{'ANSWER_TYPE'} eq 'no') ||
  		       ($helper->{'VARS'}->{'ANSWER_TYPE'} eq 'only')) {
  			#   Use a copy of the hash so we don't pervert it on future loop passes.
  			my %answerenv = %{$moreenv};
  			$answerenv{'answer_output_mode'}='tex';
  			$answerenv{'latex_type'}=$helper->{'VARS'}->{'LATEX_TYPE'};
  			&Apache::lonxml::restore_problem_counter();
- Line 2985  sub print_resources {
+ Line 3678  sub print_resources {
  			    my $header =&print_latex_header($helper->{'VARS'}->{'LATEX_TYPE'});
- 			    $header =~ s/\\begin{document}//;     #<<<<<
+                             unless ($helper->{'VARS'}->{'ANSWER_TYPE'} eq 'only') {
+                                 $header =~ s/\\begin{document}//;     #<<<<<
+                             }
  			    my $title = &Apache::lonnet::gettitle($curresline);
  			    $title = &Apache::lonxml::latex_special_symbols($title);
  			    my $body   ='\vskip 0 mm \noindent\textbf{'.$title.'}\vskip 0 mm ';
- Line 3042  sub print_resources {
+ Line 3737  sub print_resources {
  		}
  	    }
  	    $remove_latex_header = 'YES';
  	}
+ 	$assignment = &Apache::lonxml::latex_special_symbols(
+ 	    &Apache::lonnet::gettitle($map), 'header');
+ 	if (($assignment ne $current_assignment) && ($assignment ne "")) {
+ 	    my $header_line = &format_page_header($LaTeXwidth, $parmhash{'print_header_format'},
+ 						  $assignment, $courseidinfo,
+ 						  $fullname, $usersection);
+ 	    my $header_start = ($columns_in_format == 1) ? '\lhead'
+ 		: '\fancyhead[LO]';
+ 	    $header_line = $header_start.'{'.$header_line.'}';
+ 	    $current_output = $current_output . $header_line;
+ 	    $current_assignment = $assignment;
+ 	}
  	if (&Apache::loncommon::connection_aborted($r)) { last; }
      }
+     # If we are printing incomplete it's possible we don't have
+     # anything to print.  The print subsystem is not so good at handling
+     # that so we're going to generate a stub that says there are no
+     # incomplete resources for the person.
+     #
+     if ($actually_printed == 0) {
+ 	$current_output  = &encapsulate_minipage("\\vskip -10mm \nNo incomplete resources\n \\vskip 100 mm { }\n");
+ 	if ($remove_latex_header eq "NO") {
+ 	    $current_output = &print_latex_header() . $current_output;
+ 	} else {
+ 	    $current_output = &latex_header_footer_remove($current_output);
+ 	}
+     }
-     my $courseidinfo = &get_course();
+     if ($syllabus_first) {
-     my $currentassignment=&Apache::lonxml::latex_special_symbols($helper->{VARS}->{'assignment'},'header');
+         $current_output =~ s/\\\\ Last updated:/Last updated:/
-     my $header_line =
+     }
- 	&format_page_header($LaTeXwidth, $parmhash{'print_header_format'},
+     my $newheader;
- 			    $currentassignment, $courseidinfo, $fullname, $usersection);
+     unless ($assessment_first) {
-     my $header_start = ($columns_in_format == 1) ? '\lhead'
+ 	my $currentassignment=&Apache::lonxml::latex_special_symbols($helper->{VARS}->{'assignment'},'header');
- 	                                         : '\fancyhead[LO]';
+ 	my $header_line =
-     $header_line = $header_start.'{'.$header_line.'}';
+ 	    &format_page_header($LaTeXwidth, $parmhash{'print_header_format'},
-     if ($current_output=~/\\documentclass/ && (!$syllabus_first)) {
+ 				$currentassignment, $courseidinfo, $fullname, $usersection);
- 	$current_output =~ s/\\begin{document}/\\setlength{\\topmargin}{1cm} \\begin{document}\\noindent\\parbox{\\minipagewidth}{\\noindent$header_line$namepostfix}\\vskip 5 mm /;
+ 	my $header_start = ($columns_in_format == 1) ? '\lhead'
-     } elsif ($syllabus_first) {
+ 	    : '\fancyhead[LO]';
+ 	$newheader = $header_start.'{'.$header_line.'}';
+     }
+     if ($current_output=~/\\documentclass/) {
+ 	$current_output =~ s/\\begin{document}/\\setlength{\\topmargin}{1cm} \\begin{document}\\noindent\\parbox{\\minipagewidth}{\\noindent$newheader$namepostfix}\\vskip 5 mm /;
- 	$current_output =~ s/\\\\ Last updated:/Last updated:/
      } else {
  	my $blankpages =
  	    '\clearpage\strut\clearpage'x$helper->{'VARS'}->{'EMPTY_PAGES'};
  	$current_output = '\strut\vspace*{-6 mm}\\newline'.
  	    &copyright_line().' \newpage '.$blankpages.$end_of_student.
  	    '\setcounter{page}{1}\noindent\parbox{\minipagewidth}{\noindent'.
- 	    $header_line.$namepostfix.'} \vskip 5 mm '.$current_output;
+ 	    $newheader.$namepostfix. '} \vskip 5 mm '.$current_output;
      }
      #
      #  Close the student bracketing.
- Line 3076  sub print_resources {
+ Line 3801  sub print_resources {
  }
+ sub printing_blocked {
+     my ($r,$blocktext) = @_;
+     my $title = &mt('Preparing Printout');
+     &Apache::lonhtmlcommon::clear_breadcrumbs();
+     &Apache::lonhtmlcommon::add_breadcrumb({href=>'/adm/printout',
+                                             text=> $title});
+     my $breadcrumbs = &Apache::lonhtmlcommon::breadcrumbs($title);
+     &Apache::loncommon::content_type($r,'text/html');
+     &Apache::loncommon::no_cache($r);
+     $r->send_http_header;
+     $r->print(&Apache::loncommon::start_page('Preparing Printout').
+               $breadcrumbs.
+               $blocktext.
+               &Apache::loncommon::end_page());
+     return;
+ }
  sub handler {
      my $r = shift;
+     if ($env{'request.course.id'}) {
+         my $cdom = $env{'course.'.$env{'request.course.id'}.'.domain'};
+         my $cnum = $env{'course.'.$env{'request.course.id'}.'.num'};
+         my ($blocked,$blocktext) =
+             &Apache::loncommon::blocking_status('printout',$cnum,$cdom);
+         if ($blocked) {
+             my $checkrole = "cm./$cdom/$cnum";
+             if ($env{'request.course.sec'} ne '') {
+                 $checkrole .= "/$env{'request.course.sec'}";
+             }
+             unless ((&Apache::lonnet::allowed('evb',undef,undef,$checkrole)) &&
+                     ($env{'request.role'} !~ m{^st\./$cdom/$cnum})) {
+                 &printing_blocked($r,$blocktext);
+                 return OK;
+             }
+         }
+     }
      &init_perm();
      my $helper = printHelper($r);
      if (!ref($helper)) {
  	return $helper;
- Line 3107  sub handler {
+ Line 3864  sub handler {
      &output_data($r,$helper,\%parmhash);
      return OK;
  }
  use Apache::lonhelper;
- Line 3132  sub init_perm {
+ Line 3889  sub init_perm {
  	$perm{'pfo'}=&Apache::lonnet::allowed('pfo',
  		  $env{'request.course.id'}.'/'.$env{'request.course.sec'});
      }
+     $perm{'vgr'}=&Apache::lonnet::allowed('vgr',$env{'request.course.id'});
+     if (!$perm{'vgr'}) {
+         $perm{'vgr'}=&Apache::lonnet::allowed('vgr',
+                    $env{'request.course.id'}.'/'.$env{'request.course.sec'});
+     }
  }
  sub get_randomly_ordered_warning {
- Line 3147  sub get_randomly_ordered_warning {
+ Line 3909  sub get_randomly_ordered_warning {
  	    my $func =
  	        sub { return ($_[0]->is_map() && $_[0]->randomorder); };
  	    my @matches = $navmap->retrieveResources($res, $func,1,1,1);
- 	    if (@matches) {
- 	        $message = "Some of the items below are in folders set to be randomly ordered. However, when printing the contents of these folders, they will be printed in the original order for all students, not the randomized order.";
- 	    }
-         }
-         if ($message) {
- 	    return '<message type="warning">'.$message.'</message>';
          }
      } else {
          $message = "Retrieval of information about ordering of resources failed.";
- Line 3242  sub printHelper {
+ Line 3999  sub printHelper {
      }
      # Detect whether we're coming from construction space
-     if ($env{'form.postdata'}=~/^(?:http:\/\/[^\/]+\/|\/|)\~([^\/]+)\/(.*)$/) {
+     if ($env{'form.postdata'}=~m{^/priv}) {
-         $helper->{VARS}->{'filename'} = "~$1/$2";
+         $helper->{VARS}->{'filename'} = $env{'form.postdata'};
          $helper->{VARS}->{'construction'} = 1;
      } else {
          if ($env{'form.postdata'}) {
- Line 3279  sub printHelper {
+ Line 4036  sub printHelper {
      my ($map, $id, $url);
      my $subdir;
      my $is_published=0;		# True when printing from resource space.
+     my $res_printable = 1;	# By default the current resource is printable.
+     my $userCanPrint = ($perm{'pav'} || $perm{'pfo'});
+     my $res_printstartdate;
+     my $res_printenddate;
+     my $map_open = 0;
+     my $map_close = 0xffffffff;
+     my $course_open = 0;
+     my $course_close = 0xffffffff;
      # Get the resource name from construction space
      if ($helper->{VARS}->{'construction'}) {
- Line 3293  sub printHelper {
+ Line 4058  sub printHelper {
  	    ($map, $id, $url) = &Apache::lonnet::decode_symb($symb);
  	    $helper->{VARS}->{'postdata'} =
  		&Apache::lonenc::check_encrypt(&Apache::lonnet::clutter($url));
+ 	    my $navmap = Apache::lonnavmaps::navmap->new();
+ 	    my $res   = $navmap->getBySymb($symb);
+ 	    $res_printable  = $res->resprintable() || $userCanPrint; #printability in course context
+ 	    ($res_printstartdate, $res_printenddate) = 	&get_print_dates($res);
+ 	    ($course_open, $course_close) = &course_print_dates($res);
+ 	    ($map_open, $map_close)       = &map_print_dates($res);
  	} else {
+ 	    # Resource space.
  	    $url = $helper->{VARS}->{'postdata'};
  	    $is_published=1;	# From resource space.
  	}
- Line 3303  sub printHelper {
+ Line 4077  sub printHelper {
              $resourceTitle = substr($postdata, rindex($postdata, '/') + 1);
          }
          $subdir = &Apache::lonnet::filelocation("", $url);
      }
      if (!$helper->{VARS}->{'curseed'} && $env{'form.curseed'}) {
  	$helper->{VARS}->{'curseed'}=$env{'form.curseed'};
      }
      if (!$helper->{VARS}->{'probstatus'} && $env{'form.problemtype'}) {
  	$helper->{VARS}->{'probstatus'}=$env{'form.problemstatus'};
      }
- Line 3332  sub printHelper {
+ Line 4109  sub printHelper {
      my $printChoices = [];
      my $paramHash;
-     if ($resourceTitle) {
+     # If there is a current resource and it is printable
+     # Give that as a choice.
+     if ($resourceTitle && $res_printable) {
          push @{$printChoices}, ["<b><i>$resourceTitle</i></b> (".&mt('the resource you just saw on the screen').")", 'current_document', 'PAGESIZE'];
      }
      # Useful filter strings
-     my $isProblem = '($res->is_problem()||$res->contains_problem||$res->is_practice()) ';
+     my $isPrintable = ' && $res->resprintable()';
+     my $isProblem = '(($res->is_problem()||$res->contains_problem() ||$res->is_practice()))';
+     $isProblem .= $isPrintable unless $userCanPrint;
      $isProblem .= ' && !$res->randomout()' if !$userCanSeeHidden;
-     my $isProblemOrMap = '$res->is_problem() || $res->contains_problem() || $res->is_sequence() || $res->is_practice()';
+     my $isProblemOrMap = '($res->is_problem() || $res->contains_problem() || $res->is_sequence() || $res->is_practice())';
-     my $isNotMap = '!$res->is_sequence()';
+     $isProblemOrMap .= $isPrintable unless $userCanPrint;
+     my $isNotMap = '(!$res->is_sequence())';
+     $isNotMap .= $isPrintable unless $userCanPrint;
      $isNotMap .= ' && !$res->randomout()' if !$userCanSeeHidden;
      my $isMap = '$res->is_map()';
-     my $symbFilter = '$res->shown_symb()';
+     $isMap .= $isPrintable unless $userCanPrint;
+     my $symbFilter = '$res->shown_symb() ';
      my $urlValue = '$res->link()';
      $helper->declareVar('SEQUENCE');
- Line 3353  sub printHelper {
+ Line 4140  sub printHelper {
      my $start_new_option;
      if ($perm{'pav'}) {
  	$start_new_option =
- 	    "<option text='".&mt('Start new page<br />before selected').
+ 	    "<option text='".&mt('Start new page[_1]before selected','<br />').
  	    "' variable='FINISHPAGE' />".
- 	    "<option text='".&mt('Extra space<br />before selected').
+ 	    "<option text='".&mt('Extra space[_1]before selected','<br />').
  	    "' variable='EXTRASPACE' type='text' />" .
  	    "<option " .
  	    "' variable='POSSIBLE_RESOURCES' type='hidden' />".
- 	    "<option text='".&mt('Space units<br />check for mm').
+ 	    "<option text='".&mt('Space units[_1]check for mm','<br />').
  	    "' variable='EXTRASPACE_UNITS' type='checkbox' />"
  	    ;
- Line 3423  sub printHelper {
+ Line 4210  sub printHelper {
      if (($helper->{'VAR'}->{'construction'} ne '1' ) &&
  	$helper->{VARS}->{'postdata'} &&
  	$helper->{VARS}->{'assignment'}) {
+ 	# BZ 5209 - Print incomplete problems from sequence:
+ 	# the exact form of this depends on whether or not we are privileged or a mere
+ 	# plebe of s student:
+ 	my $printSelector = 'map_incomplete_problems_seq';
+ 	my $nextState     = 'CHOOSE_INCOMPLETE_SEQ';
+ 	my $textSuffix    = '';
+ 	if ($userCanPrint)  {
+ 	    $printSelector = 'map_incomplete_problems_people_seq';
+ 	    $nextState     = 'CHOOSE_INCOMPLETE_PEOPLE_SEQ';
+ 	    $textSuffix    = ' for selected students';
+ 	    my $helperStates =
+ 		&create_incomplete_folder_selstud_helper($helper, $map);
+ 	    &Apache::lonxml::xmlparse($r, 'helper', $helperStates);
+ 	} else {
+ 	    if (&printable($map_open, $map_close)) {
+ 		my $helperStates = &create_incomplete_folder_helper($helper, $map); # Create needed states for student.
+ 		&Apache::lonxml::xmlparse($r, 'helper', $helperStates);
+ 	    } else {
+ 		# TODO: Figure out how to break the news...this folder is not printable.
+ 	    }
+ 	}
+ 	if ($userCanPrint || &printable($map_open, $map_close)) {
+ 	    push(@{$printChoices},
+ 		 [&mt('Selected  [_1]Incomplete Problems[_2] from folder [_3]' . $textSuffix,
+ 		      '<b>', '</b>',
+ 		      '<b><i>'. $sequenceTitle . '</b></i>'),
+ 		  $printSelector,
+ 		  $nextState]);
+ 	}
          # Allow problems from sequence
-         push @{$printChoices},
+ 	if ($userCanPrint || &printable($map_open, $map_close)) {
+ 	    push @{$printChoices},
  	    [&mt('Selected [_1]Problems[_2] from folder [_3]','<b>','</b>','<b><i>'.$sequenceTitle.'</i></b>'),
  	     'map_problems',
  	     'CHOOSE_PROBLEMS'];
-         # Allow all resources from sequence
+ 	    # Allow all resources from sequence
-         push @{$printChoices}, [&mt('Selected [_1]Resources[_2] from folder [_3]','<b>','</b>','<b><i>'.$sequenceTitle.'</i></b>'),
+ 	    push @{$printChoices}, [&mt('Selected [_1]Resources[_2] from folder [_3]','<b>','</b>','<b><i>'.$sequenceTitle.'</i></b>'),
- 				'map_problems_pages',
+ 				    'map_problems_pages',
- 				'CHOOSE_PROBLEMS_HTML'];
+ 				    'CHOOSE_PROBLEMS_HTML'];
-         my $helperFragment = &generate_resource_chooser('CHOOSE_PROBLEMS',
+ 	    my $helperFragment = &generate_resource_chooser('CHOOSE_PROBLEMS',
- 							'Select Problem(s) to print',
+ 							    'Select Problem(s) to print',
- 							'multichoice="1" toponly="1" addstatus="1" closeallpages="1"',
+ 							    'multichoice="1" toponly="1" addstatus="1" closeallpages="1"',
- 							'RESOURCES',
+ 							    'RESOURCES',
- 							'PAGESIZE',
+ 							    'PAGESIZE',
- 							$map,
+ 							    $map,
- 							$isProblem, '',
+ 							    $isProblem, '',
- 							$symbFilter,
+ 							    $symbFilter,
- 							$start_new_option);
+ 							    $start_new_option);
- 	$helperFragment .= &generate_resource_chooser('CHOOSE_PROBLEMS_HTML',
+ 	    $helperFragment .= &generate_resource_chooser('CHOOSE_PROBLEMS_HTML',
- 						      'Select Resource(s) to print',
+ 							  'Select Resource(s) to print',
- 						      	'multichoice="1" toponly="1" addstatus="1" closeallpages="1"',
+ 							  'multichoice="1" toponly="1" addstatus="1" closeallpages="1"',
- 						      'RESOURCES',
+ 							  'RESOURCES',
- 						      'PAGESIZE',
+ 							  'PAGESIZE',
- 						      $map,
+ 							  $map,
- 						      $isNotMap, '',
+ 							  $isNotMap, '',
- 						      $symbFilter,
+ 							  $symbFilter,
- 						      $start_new_option);
+ 							  $start_new_option);
- 	&Apache::lonxml::xmlparse($r, 'helper', $helperFragment);
+ 	    &Apache::lonxml::xmlparse($r, 'helper', $helperFragment);
+ 	} else {
+ 	    # TODO: Figure out how to tell them the folder is not printable.
+ 	}
      }
+ 	# If the user has pfo (print for others) allow them to print all
-     # If the user has pfo (print for others) allow them to print all
+ 	# problems and resources  in the entire course, optionally for selected students
-     # problems and resources  in the entire course, optionally for selected students
+ 	my $post_data = $helper->{VARS}->{'postdata'};
-     my $post_data = $helper->{VARS}->{'postdata'};
      if ($perm{'pfo'} &&  !$is_published  &&
          ($post_data=~/\/res\// || $post_data =~/\/(syllabus|smppg|aboutme|bulletinboard)$/)) {
+ 	# BZ 5209 - incomplete problems from entire course:
+ 	push(@{$printChoices},
+ 	     [&mtn('Selected <b>Incomplete Problems</b> from <b>entire course</b> for selected people'),
+ 	      'incomplete_problems_selpeople_course', 'INCOMPLETE_PROBLEMS_COURSE_RESOURCES']);
+ 	my $helperFragment = &create_incomplete_course_helper($helper); # Create needed states.
+ 	&Apache::lonxml::xmlparse($r, 'helper', $helperFragment);
+ 	#  Selected problems/resources from entire course:
          push @{$printChoices}, [&mtn('Selected <b>Problems</b> from <b>entire course</b>'), 'all_problems', 'ALL_PROBLEMS'];
  	push @{$printChoices}, [&mtn('Selected <b>Resources</b> from <b>entire course</b>'), 'all_resources', 'ALL_RESOURCES'];
  	push @{$printChoices}, [&mtn('Selected <b>Problems</b> from <b>entire course</b> for <b>selected people</b>'), 'all_problems_students', 'ALL_PROBLEMS_STUDENTS'];
- Line 3476  my $suffixXml = <<ALL_PROBLEMS;
+ Line 4311  my $suffixXml = <<ALL_PROBLEMS;
  ALL_PROBLEMS
           &Apache::lonxml::xmlparse($r, 'helper',
  				   &generate_resource_chooser('ALL_PROBLEMS',
- 							      'SelectProblem(s) to print',
+ 							      'Select Problem(s) to print',
  							      'multichoice="1" suppressEmptySequences="0" addstatus="1" closeallpages="1"',
  							      'RESOURCES',
  							      'PAGESIZE',
- Line 3525  ALL_PROBLEMS
+ Line 4360  ALL_PROBLEMS
  	}
  	my $randomly_ordered_warning =
- 	    &get_randomly_ordered_warning($helper,$map);
+             &get_randomly_ordered_warning($helper, $map);
  	# resource_selector will hold a few states that:
  	#   - Allow resources to be selected for printing.
- Line 3544  ALL_PROBLEMS
+ Line 4379  ALL_PROBLEMS
  							  $map,
  							  $isProblem, '', $symbFilter,
  							  $start_new_option);
- 	$resource_selector .=  <<RESOURCE_SELECTOR;
+ 	$resource_selector .=  &generate_format_selector($helper,
-     <state name="PRINT_FORMATTING" title="How should results be printed?">
+                                                          'How should results be printed?',
-     <message><br /><big><i><b>How should the results be printed?</b></i></big><br /></message>
+                                                          'PRINT_FORMATTING').
-     <choices variable="EMPTY_PAGES">
+                                &generate_resource_chooser('CHOOSE_STUDENTS_PAGE',
-       <choice computer='0'>Start each student\'s assignment on a new page/column (add a pagefeed after each assignment)</choice>
-       <choice computer='1'>Add one empty page/column after each student\'s assignment</choice>
-       <choice computer='2'>Add two empty pages/column after each student\'s assignment</choice>
-       <choice computer='3'>Add three empty pages/column after each student\'s assignment</choice>
-     </choices>
-     <nextstate>PAGESIZE</nextstate>
-     <message><hr width='33%' /><b>How do you want assignments split into PDF files? </b></message>
-     <choices variable="SPLIT_PDFS">
-        <choice computer="all">All assignments in a single PDF file</choice>
-        <choice computer="sections">Each PDF contains exactly one section</choice>
-        <choice computer="oneper">Each PDF contains exactly one assignment</choice>
-        <choice computer="usenumber" relatedvalue="NUMBER_TO_PRINT">
-             Specify the number of assignments per PDF:</choice>
-     </choices>
-     </state>
- RESOURCE_SELECTOR
-         $resource_selector .= &generate_resource_chooser('CHOOSE_STUDENTS_PAGE',
  							'Select Problem(s) to print',
  							"multichoice='1' addstatus='1' closeallpages ='1'",
  							'RESOURCES',
- Line 3636  RESOURCE_SELECTOR
+ Line 4454  RESOURCE_SELECTOR
          my @lines = &Apache::grades::get_scantronformat_file();
  	my $codechoice='';
  	foreach my $line (@lines) {
+             next if (($line =~ /^\#/) || ($line eq ''));
  	    my ($name,$description,$code_type,$code_length)=
  		(split(/:/,$line))[0,1,2,4];
  	    if ($code_length > 0 &&
- Line 3674  RESOURCE_SELECTOR
+ Line 4493  RESOURCE_SELECTOR
  	if ($helper->{VARS}->{'assignment'}) {
+ 	    # Assignment printing:
  	    push @{$printChoices}, [&mt('Selected [_1]Resources[_2] from folder [_3] for [_4]selected people[_5]','<b>','</b>','<b><i>'.$sequenceTitle.'</i></b>','<b>','</b>'), 'resources_for_students', 'CHOOSE_STUDENTS1'];
  	    push @{$printChoices}, [&mt('Selected [_1]Resources[_2] from folder [_3] for [_4]CODEd assignments[_5]','<b>','</b>','<b><i>'.$sequenceTitle.'</i></b>','<b>','</b>'), 'resources_for_anon', 'CHOOSE_ANON2'];
  	}
- Line 3692  RESOURCE_SELECTOR
+ Line 4514  RESOURCE_SELECTOR
        $start_new_option
        </resource>
      </state>
-     <state name="PRINT_FORMATTING" title="Format of the print job">
-     <nextstate>NUMBER_PER_PDF</nextstate>
-     <message><br /><big><i><b>How should the results be printed?</b></i></big><br /></message>
-     <choices variable="EMPTY_PAGES">
-       <choice computer='0'>Start each student\'s assignment on a new page/column (add a pagefeed after each assignment)</choice>
-       <choice computer='1'>Add one empty page/column after each student\'s assignment</choice>
-       <choice computer='2'>Add two empty pages/column after each student\'s assignment</choice>
-       <choice computer='3'>Add three empty pages/column after each student\'s assignment</choice>
-     </choices>
-     <nextstate>PAGESIZE</nextstate>
-     <message><hr width='33%' /><b>How do you want assignments split into PDF files? </b></message>
-     <choices variable="SPLIT_PDFS">
-        <choice computer="all">All assignments in a single PDF file</choice>
-        <choice computer="sections">Each PDF contains exactly one section</choice>
-        <choice computer="oneper">Each PDF contains exactly one assignment</choice>
-        <choice computer="usenumber" relatedvalue="NUMBER_TO_PRINT">
-            Specify the number of assignments per PDF:</choice>
-     </choices>
-     </state>
  RESOURCE_SELECTOR
+         $resource_selector .= &generate_format_selector($helper,
+                                                         'Format of the print job',
+                                                         'PRINT_FORMATTING');
  	&Apache::lonxml::xmlparse($r, 'helper', <<CHOOSE_STUDENTS1);
    <state name="CHOOSE_STUDENTS1" title="Select Students and Resources">
      <choices variable='student_sort'>
- Line 3754  CHOOSE_STUDENTS1
+ Line 4559  CHOOSE_STUDENTS1
      <message></td><td></message>
      <string variable="ANON_CODE_STORAGE_NAME" maxlength="50" size="20" />
      <message></td></tr><tr><td></message>
-     <message><b>Bubble sheet type:</b></message>
+     <message><b>Bubblesheet type:</b></message>
      <message></td><td></message>
      <dropdown variable="CODE_OPTION" multichoice="0" allowempty="0">
      $codechoice
- Line 3838  CHOOSE_FROM_SUBDIR
+ Line 4643  CHOOSE_FROM_SUBDIR
      <message>Select the sequence to print resources from:</message>
      <resource variable="SEQUENCE">
        <nextstate>CHOOSE_FROM_ANY_SEQUENCE</nextstate>
-       <filterfunc>return \$res->is_sequence;</filterfunc>
+       <filterfunc>return &Apache::lonprintout::printable_sequence(\$res);</filterfunc>
        <valuefunc>return $urlValue;</valuefunc>
        <choicefunc>return \$res->hasResource(\$res,sub { return !\$_[0]->is_sequence() },0,0);
  	</choicefunc>
- Line 3860  CHOOSE_FROM_ANY_SEQUENCE
+ Line 4665  CHOOSE_FROM_ANY_SEQUENCE
      # Generate the first state, to select which resources get printed.
      Apache::lonhelper::state->new("START", "Select Printing Options:");
+     if (!$res_printable) {
+         my $now = time;
+         my $shownprintstart = &Apache::lonlocal::locallocaltime($res_printstartdate);
+         my $shownprintend = &Apache::lonlocal::locallocaltime($res_printenddate);
+         my $noprintmsg;
+         if (($res_printenddate) && ($res_printenddate < $now)) {
+                 $noprintmsg = &mt('Printing for current resource no longer available (ended: [_1])',
+                                   $shownprintend);
+         } else {
+             if (($res_printstartdate) && ($res_printstartdate > $now)) {
+                 if (($res_printenddate) && ($res_printenddate > $now) && ($res_printenddate > $res_printstartdate)) {
+                     $noprintmsg = &mt('Printing for current resource is only possible between [_1] and [_2]',
+                                   $shownprintstart,$shownprintend);
+                 } elsif (!$res_printenddate) {
+                     $noprintmsg = &mt('Printing for current resource will only be possible starting [_1]',
+                                       $shownprintstart);
+                 } else {
+                     $noprintmsg = &mt('Printing for current resource is unavailable');
+                 }
+             }
+         }
+         if ($noprintmsg) {
+             $paramHash = Apache::lonhelper::getParamHash();
+ 	    $paramHash->{MESSAGE_TEXT} =
+                 '<p class="LC_info">'.$noprintmsg.'</p>';
+ 	    Apache::lonhelper::message->new();
+         }
+     }
+     $paramHash = Apache::lonhelper::getParamHash();
      $paramHash = Apache::lonhelper::getParamHash();
      $paramHash->{MESSAGE_TEXT} = "";
      Apache::lonhelper::message->new();
- Line 3871  CHOOSE_FROM_ANY_SEQUENCE
+ Line 4706  CHOOSE_FROM_ANY_SEQUENCE
      my $startedTable = 0; # have we started an HTML table yet? (need
                            # to close it later)
-     if (($perm{'pav'} and &Apache::lonnet::allowed('vgr',$env{'request.course.id'})) or
+     if (($perm{'pav'} and $perm{'vgr'}) or
  	($helper->{VARS}->{'construction'} eq '1')) {
  	&addMessage('<br />'
                     .'<h3>'.&mt('Print Options').'</h3>'
- Line 4081  FONT_SELECTION
+ Line 4916  FONT_SELECTION
  		      return "$helper->{VARS}->{'probstatus'}";
                     </defaultvalue>
  		   <choice computer="problem">Homework Problem</choice>
- 		   <choice computer="exam">Exam Problem</choice>
+ 		   <choice computer="exam">Bubblesheet Exam Problem</choice>
  		   <choice computer="survey">Survey question</choice>
                     ,choice computer="anonsurvey"Anonymous survey question</choice>
  		</dropdown>
- Line 4118  PROBTYPE
+ Line 4953  PROBTYPE
          return $helper;
      }
-     $r->print($helper->display());
+     my $footer;
      if ($helper->{STATE} eq 'START') {
- 	&recently_generated($r);
+         my $prtspool=$r->dir_config('lonPrtDir');
+ 	$footer = &recently_generated($prtspool);
      }
+     $r->print($helper->display($footer));
      &Apache::lonhelper::unregisterHelperTags();
      return OK;
- Line 4500  sub postprocess {
+ Line 5337  sub postprocess {
      }
  }
  __END__

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>

Removed from v.1.580
changed lines
	Added in v.1.639