[BACK]Return to lcpasswd CVS log [TXT] [DIR] Up to [LON-CAPA] / loncom

Diff for /loncom/lcpasswd between versions 1.3 and 1.5

version 1.3, 2000/10/27 22:13:40 version 1.5, 2000/10/28 18:25:47
Line 8 Line 8
 use strict;  use strict;
   
 # This script is a setuid script that should  # This script is a setuid script that should
 # be run by user 'www'.  # be run by user 'www'.  This script allows
   # for synchronous entry of passwords into
   # both the /etc/passwd and the /etc/smbpasswd
   # files.
   
   # This script works under the same process control mechanism
   # as lcuseradd and lcpasswd, to make sure that only one of these
   # processes is running at any one time on the system.
   
 # Standard input usage  # Standard input usage
 # First line is USERNAME  # First line is USERNAME
 # Second line is CURRENT PASSWORD  # Second line is CURRENT PASSWORD
 # Third line is NEW PASSWORD  # Third line is NEW PASSWORD
   
   # Command-line arguments
   # Yes, but be very careful here (don't pass shell commands)
   # and this is only supported to allow perl-system calls.
   
   # Usage within code
   # Note: NEVER run as system("/home/httpd/perl/lcpasswd NAME OLDPWD NEWPWD")
   #
   # $exitcode=system("/home/httpd/perl/lcpasswd","NAME","OLDPWD","NEWPWD")/256;
   # print "uh-oh" if $exitcode;
   
   # These are the exit codes.
   # ( (0,"ok"),
   #   (1,"User ID mismatch.  This program must be run as user 'www'),
   #   (2,"Error. This program does not accept command-line arguments."),
   #   (3,"Error. Three lines need to be entered into standard input.\n"),
   #   (4,"Error. Too many other simultaneous password change requests being made.\n"),
   #   (5,"Error. User $username does not exist.\n"),
   #   (6,"Error. Invalid entry of current password.\n"),
   #   (7,"Error.  Root was not successfully enabled.\n") )
   
 # Security  # Security
 $ENV{'PATH'}="/bin:/usr/bin"; # Nullify path information except for what smbpasswd needs  $ENV{'PATH'}="/bin:/usr/bin"; # Nullify path information except for what smbpasswd needs
 $ENV{'BASH_ENV'}=""; # Nullify shell environment information.  $ENV{'BASH_ENV'}=""; # Nullify shell environment information.
   
   # Do not print error messages if there are command-line arguments
   my $noprint=0;
   if (@ARGV) {
       $noprint=1;
   }
   
   # Read in /etc/passwd, and make sure this process is running from user=www
 open (IN, "</etc/passwd");  open (IN, "</etc/passwd");
 my @lines=<IN>;  my @lines=<IN>;
 close IN;  close IN;
Line 29  for my $l (@lines) { Line 63  for my $l (@lines) {
     if ($F[0] eq 'www') {$wwwid=$F[2];}      if ($F[0] eq 'www') {$wwwid=$F[2];}
 }  }
 if ($wwwid!=$<) {  if ($wwwid!=$<) {
     print("User ID mismatch.  This program must be run as user 'www'\n");      print("User ID mismatch.  This program must be run as user 'www'\n") unless $noprint;
     exit 0;      unlink("/tmp/lock_lcpasswd");
       exit 1;
 }  }
 &disable_root_capability;  &disable_root_capability;
 if (@ARGV) {  
     print("Error. This program does not accept command-line arguments.\n");  
     exit 0;  
 }  
   
 # Gather input from standard input.  Should only be 3 lines.  
 my @input=<>;  
 if (@input!=3) {  
     print("Error. Three lines need to be entered into standard input.\n");  
     exit 0;  
 }  
   
 # Handle case of another lcpasswd process  # Handle case of another lcpasswd process
 unless (&try_to_lock("/tmp/lock_lcpasswd")) {  unless (&try_to_lock("/tmp/lock_lcpasswd")) {
     print "Error. Too many other simultaneous password change requests being made.\n";      print "Error. Too many other simultaneous password change requests being made.\n" unless $noprint;
     exit 0;      exit 4;
   }
   
   # Gather input.  Should only be 3 values.
   my @input;
   if (@ARGV==3) {
       @input=@ARGV;
   }
   elsif (@ARGV) {
       print("Error. This program needs 3 command-line arguments (username, old password, new password).\n") unless $noprint;
       unlink("/tmp/lock_lcpasswd");
       exit 2;
   }
   else {
       @input=<>;
       if (@input!=3) {
    print("Error. Three lines need to be entered into standard input.\n") unless $noprint;
    unlink("/tmp/lock_lcpasswd");
    exit 3;
       }
       map {chop} @input;
 }  }
   
 my ($username,$oldpwd,$newpwd)=map {chop; $_} @input;  my ($username,$oldpwd,$newpwd)=@input;
   
 # Grab the line corresponding to username  # Grab the line corresponding to username
 my ($userid,$useroldcryptpwd);  my ($userid,$useroldcryptpwd);
Line 63  for my $l (@lines) { Line 107  for my $l (@lines) {
   
 # Verify existence of user  # Verify existence of user
 if (!defined($userid)) {  if (!defined($userid)) {
     print "Error. User $username does not exist.\n";      print "Error. User $username does not exist.\n" unless $noprint;
     exit 0;      unlink("/tmp/lock_lcpasswd");
       exit 5;
 }  }
   
 # Verify password entry  # Verify password entry
 if (crypt($oldpwd,$useroldcryptpwd) ne $useroldcryptpwd) {  if (crypt($oldpwd,$useroldcryptpwd) ne $useroldcryptpwd) {
     print "Error. Invalid entry of current password.\n";      print "Error. Invalid entry of current password.\n" unless $noprint;
     exit 0;      unlink("/tmp/lock_lcpasswd");
       exit 6;
 }  }
   
 # Construct new password entry (random salt)  # Construct new password entry (random salt)
Line 79  $U[1]=$newcryptpwd; Line 125  $U[1]=$newcryptpwd;
 my $userline=join(":",@U);  my $userline=join(":",@U);
 my $rootid=&enable_root_capability;  my $rootid=&enable_root_capability;
 if ($rootid!=0) {  if ($rootid!=0) {
     print "Error.  Root was not successfully enabled.\n";      print "Error.  Root was not successfully enabled.\n" unless $noprint;
     exit 0;      unlink("/tmp/lock_lcpasswd");
       exit 7;
 }  }
 open PASSWORDFILE, ">/etc/passwd" or die("Cannot open /etc/passwd!");  open PASSWORDFILE, ">/etc/passwd" or die("Cannot open /etc/passwd!");
 for my $l (@lines) {  for my $l (@lines) {
Line 116  close OUT; Line 163  close OUT;
 $<=$wwwid; # unfool the program  $<=$wwwid; # unfool the program
 &disable_root_capability;  &disable_root_capability;
 unlink("/tmp/lock_lcpasswd");  unlink("/tmp/lock_lcpasswd");
   exit 0;
   
   # ----------------------------------------------------------- have setuid script run as root
 sub enable_root_capability {  sub enable_root_capability {
     if ($wwwid==$>) {      if ($wwwid==$>) {
  ($<,$>)=($>,$<);   ($<,$>)=($>,$<);
Line 128  sub enable_root_capability { Line 177  sub enable_root_capability {
     return $>;      return $>;
 }  }
   
   # ----------------------------------------------------------- have setuid script run as www
 sub disable_root_capability {  sub disable_root_capability {
     if ($wwwid==$<) {      if ($wwwid==$<) {
  ($<,$>)=($>,$<);   ($<,$>)=($>,$<);
Line 138  sub disable_root_capability { Line 188  sub disable_root_capability {
     }      }
 }  }
   
   # ----------------------------------- make sure that another lcpasswd process isn't running
 sub try_to_lock {  sub try_to_lock {
     my ($lockfile)=@_;      my ($lockfile)=@_;
     my $currentpid;      my $currentpid;
     my $lastpid;      my $lastpid;
       # Do not manipulate lock file as root
       if ($>==0) {
    return 0;
       }
       # Try to generate lock file.
       # Wait 3 seconds.  If same process id is in
       # lock file, then assume lock file is stale, and
       # go ahead.  If process id's fluctuate, try
       # for a maximum of 10 times.
     for (0..10) {      for (0..10) {
  if (-e $lockfile) {   if (-e $lockfile) {
     open(LOCK,"<$lockfile");      open(LOCK,"<$lockfile");
Removed from v.1.3  
changed lines
  Added in v.1.5

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>