--- loncom/loncnew 2003/07/15 02:07:05 1.15
+++ loncom/loncnew 2005/06/09 02:38:03 1.70
@@ -2,13 +2,12 @@
# The LearningOnline Network with CAPA
# lonc maintains the connections to remote computers
#
-# $Id: loncnew,v 1.15 2003/07/15 02:07:05 foxr Exp $
+# $Id: loncnew,v 1.70 2005/06/09 02:38:03 albertel Exp $
#
# Copyright Michigan State University Board of Trustees
#
# This file is part of the LearningOnline Network with CAPA (LON-CAPA).
-#
-# LON-CAPA is free software; you can redistribute it and/or modify
+## LON-CAPA is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
@@ -36,50 +35,16 @@
# - Add ability to create/negotiate lond connections (done).
# - Add general logic for dispatching requests and timeouts. (done).
# - Add support for the lonc/lond requests. (done).
-# - Add logging/status monitoring.
-# - Add Signal handling - HUP restarts. USR1 status report.
+# - Add logging/status monitoring. (done)
+# - Add Signal handling - HUP restarts. USR1 status report. (done)
# - Add Configuration file I/O (done).
-# - Add management/status request interface.
+# - Add management/status request interface. (done)
# - Add deferred request capability. (done)
-# - Detect transmission timeouts.
-#
-
-# Change log:
-# $Log: loncnew,v $
-# Revision 1.15 2003/07/15 02:07:05 foxr
-# Added code for lonc/lond transaction timeouts. Who knows if it works right.
-# The intent is for a timeout to fail any transaction in progress and kill
-# off the sockt that timed out.
-#
-# Revision 1.14 2003/07/03 02:10:18 foxr
-# Get all of the signals to work correctly.
-#
-# Revision 1.13 2003/07/02 01:31:55 foxr
-# Added kill -HUP logic (restart).
-#
-# Revision 1.11 2003/06/25 01:54:44 foxr
-# Fix more problems with transaction failure.
-#
-# Revision 1.10 2003/06/24 02:46:04 foxr
-# Put a limit on the number of times we'll retry a connection.
-# Start getting the signal stuff put in as well...note that need to get signals
-# going or else 6the client will permanently give up on dead servers.
-#
-# Revision 1.9 2003/06/13 02:38:43 foxr
-# Add logging in 'expected format'
-#
-# Revision 1.8 2003/06/11 02:04:35 foxr
-# Support delayed transactions... this is done uniformly by encapsulating
-# transactions in an object ... a LondTransaction that is implemented by
-# LondTransaction.pm
-#
-# Revision 1.7 2003/06/03 01:59:39 foxr
-# complete coding to support deferred transactions.
-#
+# - Detect transmission timeouts. (done)
#
+use strict;
use lib "/home/httpd/lib/perl/";
-use lib "/home/foxr/newloncapa/types";
use Event qw(:DEFAULT );
use POSIX qw(:signal_h);
use POSIX;
@@ -96,17 +61,7 @@ use LONCAPA::LondConnection;
use LONCAPA::LondTransaction;
use LONCAPA::Configuration;
use LONCAPA::HashIterator;
-
-
-#
-# Disable all signals we might receive from outside for now.
-#
-#$SIG{QUIT} = IGNORE;
-#$SIG{HUP} = IGNORE;
-#$SIG{USR1} = IGNORE;
-#$SIG{INT} = IGNORE;
-#$SIG{CHLD} = IGNORE;
-#$SIG{__DIE__} = IGNORE;
+use Fcntl qw(:flock);
# Read the httpd configuration file to get perl variables
@@ -119,19 +74,29 @@ my %perlvar = %{$perlvarref};
# parent and shared variables.
my %ChildHash; # by pid -> host.
+my %HostToPid; # By host -> pid.
+my %HostHash; # by loncapaname -> IP.
+my %listening_to; # Socket->host table for who the parent
+ # is listening to.
+my %parent_dispatchers; # host-> listener watcher events.
+my %parent_handlers; # Parent signal handlers...
my $MaxConnectionCount = 10; # Will get from config later.
my $ClientConnection = 0; # Uniquifier for client events.
my $DebugLevel = 0;
-my $IdleTimeout= 3600; # Wait an hour before pruning connections.
+my $NextDebugLevel= 2; # So Sigint can toggle this.
+my $IdleTimeout= 600; # Wait 10 minutes before pruning connections.
+
+my $LogTransactions = 0; # When True, all transactions/replies get logged.
+my $executable = $0; # Get the full path to me.
#
# The variables below are only used by the child processes.
#
my $RemoteHost; # Name of host child is talking to.
-my $UnixSocketDir= "/home/httpd/sockets";
+my $UnixSocketDir= $perlvar{'lonSockDir'};
my $IdleConnections = Stack->new(); # Set of idle connections
my %ActiveConnections; # Connections to the remote lond.
my %ActiveTransactions; # LondTransactions in flight.
@@ -141,8 +106,16 @@ my $ConnectionCount = 0;
my $IdleSeconds = 0; # Number of seconds idle.
my $Status = ""; # Current status string.
my $RecentLogEntry = "";
-my $ConnectionRetries=5; # Number of connection retries allowed.
-my $ConnectionRetriesLeft=5; # Number of connection retries remaining.
+my $ConnectionRetries=2; # Number of connection retries allowed.
+my $ConnectionRetriesLeft=2; # Number of connection retries remaining.
+my $LondVersion = "unknown"; # Version of lond we talk with.
+my $KeyMode = ""; # e.g. ssl, local, insecure from last connect.
+my $LondConnecting = 0; # True when a connection is being built.
+
+
+
+my $DieWhenIdle = 1; # When true children die when trimmed -> 0.
+my $I_am_child = 0; # True if this is the child process.
#
# The hash below gives the HTML format for log messages
@@ -150,13 +123,27 @@ my $ConnectionRetriesLeft=5; # Number of
#
my %LogFormats;
-$LogFormats{"CRITICAL"} = "CRITICAL: %s";
-$LogFormats{"SUCCESS"} = "SUCCESS: %s";
-$LogFormats{"INFO"} = "INFO: %s";
-$LogFormats{"WARNING"} = "WARNING: %s";
+$LogFormats{"CRITICAL"} = "CRITICAL: %s";
+$LogFormats{"SUCCESS"} = "SUCCESS: %s";
+$LogFormats{"INFO"} = "INFO: %s";
+$LogFormats{"WARNING"} = "WARNING: %s";
$LogFormats{"DEFAULT"} = " %s ";
+# UpdateStatus;
+# Update the idle status display to show how many connections
+# are left, retries and other stuff.
+#
+sub UpdateStatus {
+ if ($ConnectionRetriesLeft > 0) {
+ ShowStatus(GetServerHost()." Connection count: ".$ConnectionCount
+ ." Retries remaining: ".$ConnectionRetriesLeft
+ ." ($KeyMode)");
+ } else {
+ ShowStatus(GetServerHost()." >> DEAD <<");
+ }
+}
+
=pod
@@ -165,6 +152,7 @@ $LogFormats{"DEFAULT"} = " %s ";
Makes an entry into the permanent log file.
=cut
+
sub LogPerm {
my $message=shift;
my $execdir=$perlvar{'lonDaemons'};
@@ -196,9 +184,9 @@ host and the time will be formatted into
=cut
sub Log {
- my $severity = shift;
- my $message = shift;
-
+
+ my ($severity, $message) = @_;
+
if(!$LogFormats{$severity}) {
$severity = "DEFAULT";
}
@@ -233,14 +221,16 @@ Returns the name of the host that a sock
=cut
sub GetPeername {
- my $connection = shift;
- my $AdrFamily = shift;
+
+
+ my ($connection, $AdrFamily) = @_;
+
my $peer = $connection->peername();
my $peerport;
my $peerip;
if($AdrFamily == AF_INET) {
($peerport, $peerip) = sockaddr_in($peer);
- my $peername = gethostbyaddr($iaddr, $AdrFamily);
+ my $peername = gethostbyaddr($peerip, $AdrFamily);
return $peername;
} elsif ($AdrFamily == AF_UNIX) {
my $peerfile;
@@ -248,7 +238,6 @@ sub GetPeername {
return $peerfile;
}
}
-#----------------------------- Timer management ------------------------
=pod
=head2 Debug
@@ -258,18 +247,20 @@ Invoked to issue a debug message.
=cut
sub Debug {
- my $level = shift;
- my $message = shift;
+
+ my ($level, $message) = @_;
+
if ($level <= $DebugLevel) {
- print $message." host = ".$RemoteHost."\n";
+ Log("INFO", "-Debug- $message host = $RemoteHost");
}
}
sub SocketDump {
- my $level = shift;
- my $socket= shift;
+
+ my ($level, $socket) = @_;
+
if($level <= $DebugLevel) {
- $socket->Dump();
+ $socket->Dump(-1); # Ensure it will get dumped.
}
}
@@ -281,6 +272,7 @@ sub SocketDump {
and as what we return in a SIGUSR1
=cut
+
sub ShowStatus {
my $state = shift;
my $now = time;
@@ -291,18 +283,70 @@ sub ShowStatus {
=pod
-=head 2 SocketTimeout
+=head2 SocketTimeout
Called when an action on the socket times out. The socket is
destroyed and any active transaction is failed.
=cut
+
sub SocketTimeout {
my $Socket = shift;
-
- KillSocket($Socket);
+ Log("WARNING", "A socket timeout was detected");
+ Debug(5, " SocketTimeout called: ");
+ $Socket->Dump(0);
+ if(exists($ActiveTransactions{$Socket})) {
+ FailTransaction($ActiveTransactions{$Socket});
+ }
+ KillSocket($Socket); # A transaction timeout also counts as
+ # a connection failure:
+ $ConnectionRetriesLeft--;
+ if($ConnectionRetriesLeft <= 0) {
+ Log("CRITICAL", "Host marked DEAD: ".GetServerHost());
+ $LondConnecting = 0;
+ }
+
+}
+#
+# This function should be called by the child in all cases where it must
+# exit. If the child process is running with the DieWhenIdle turned on
+# it must create a lock file for the AF_UNIX socket in order to prevent
+# connection requests from lonnet in the time between process exit
+# and the parent picking up the listen again.
+# Parameters:
+# exit_code - Exit status value, however see the next parameter.
+# message - If this optional parameter is supplied, the exit
+# is via a die with this message.
+#
+sub child_exit {
+ my ($exit_code, $message) = @_;
+
+ # Regardless of how we exit, we may need to do the lock thing:
+
+ if($DieWhenIdle) {
+ #
+ # Create a lock file since there will be a time window
+ # between our exit and the parent's picking up the listen
+ # during which no listens will be done on the
+ # lonnet client socket.
+ #
+ my $lock_file = GetLoncSocketPath().".lock";
+ open(LOCK,">$lock_file");
+ print LOCK "Contents not important";
+ close(LOCK);
+
+ exit(0);
+ }
+ # Now figure out how we exit:
+
+ if($message) {
+ die $message;
+ } else {
+ exit($exit_code);
+ }
}
+#----------------------------- Timer management ------------------------
=pod
@@ -314,8 +358,11 @@ Invoked each timer tick.
sub Tick {
+ my ($Event) = @_;
+ my $clock_watcher = $Event->w;
+
my $client;
- ShowStatus(GetServerHost()." Connection count: ".$ConnectionCount);
+ UpdateStatus();
# Is it time to prune connection count:
@@ -324,8 +371,14 @@ sub Tick {
($WorkQueue->Count() == 0)) { # Idle connections and nothing to do?
$IdleSeconds++;
if($IdleSeconds > $IdleTimeout) { # Prune a connection...
- $Socket = $IdleConnections->pop();
+ my $Socket = $IdleConnections->pop();
KillSocket($Socket);
+ $IdleSeconds = 0; # Otherwise all connections get trimmed to fast.
+ UpdateStatus();
+ if(($ConnectionCount == 0) && $DieWhenIdle) {
+ &child_exit(0);
+
+ }
}
} else {
$IdleSeconds = 0; # Reset idle count if not idle.
@@ -333,29 +386,44 @@ sub Tick {
#
# For each inflight transaction, tick down its timeout counter.
#
- foreach $item (keys %ActiveTransactions) {
- my $Socket = $ActiveTransactions{$item}->getServer();
- $Socket->Tick();
+
+ foreach my $item (keys %ActiveConnections) {
+ my $State = $ActiveConnections{$item}->data->GetState();
+ if ($State ne 'Idle') {
+ Debug(5,"Ticking Socket $State $item");
+ $ActiveConnections{$item}->data->Tick();
+ }
}
# Do we have work in the queue, but no connections to service them?
# If so, try to make some new connections to get things going again.
#
-
+ # Note this code is dead now...
+ #
my $Requests = $WorkQueue->Count();
- if (($ConnectionCount == 0) && ($Requests > 0)) {
+ if (($ConnectionCount == 0) && ($Requests > 0) && (!$LondConnecting)) {
if ($ConnectionRetriesLeft > 0) {
- my $Connections = ($Requests <= $MaxConnectionCount) ?
- $Requests : $MaxConnectionCount;
- Debug(1,"Work but no connections, start ".$Connections." of them");
- for ($i =0; $i < $Connections; $i++) {
- MakeLondConnection();
+ Debug(5,"Work but no connections, Make a new one");
+ my $success;
+ $success = &MakeLondConnection;
+ if($success == 0) { # All connections failed:
+ Debug(5,"Work in queue failed to make any connectiouns\n");
+ EmptyQueue(); # Fail pending transactions with con_lost.
+ CloseAllLondConnections(); # Should all be closed but....
}
} else {
- Debug(1,"Work in queue, but gave up on connections..flushing\n");
+ $LondConnecting = 0;
+ ShowStatus(GetServerHost()." >>> DEAD!!! <<<");
+ Debug(5,"Work in queue, but gave up on connections..flushing\n");
EmptyQueue(); # Connections can't be established.
+ CloseAllLondConnections(); # Should all already be closed but...
}
}
+ if ($ConnectionCount == 0) {
+ $KeyMode = "";
+ $clock_watcher->cancel();
+ }
+ &UpdateStatus();
}
=pod
@@ -376,7 +444,7 @@ Trigger disconnections of idle sockets.
sub SetupTimer {
Debug(6, "SetupTimer");
- Event->timer(interval => 1, debug => 1, cb => \&Tick );
+ Event->timer(interval => 1, cb => \&Tick );
}
=pod
@@ -396,21 +464,22 @@ long enough, it will be shut down and re
sub ServerToIdle {
my $Socket = shift; # Get the socket.
+ $KeyMode = $Socket->{AuthenticationMode};
delete($ActiveTransactions{$Socket}); # Server has no transaction
- &Debug(6, "Server to idle");
+ &Debug(5, "Server to idle");
# If there's work to do, start the transaction:
- $reqdata = $WorkQueue->dequeue(); # This is a LondTransaction
- unless($reqdata eq undef) {
- Debug(9, "Queue gave request data: ".$reqdata->getRequest());
+ my $reqdata = $WorkQueue->dequeue(); # This is a LondTransaction
+ if ($reqdata ne undef) {
+ Debug(5, "Queue gave request data: ".$reqdata->getRequest());
&StartRequest($Socket, $reqdata);
} else {
# There's no work waiting, so push the server to idle list.
- &Debug(8, "No new work requests, server connection going idle");
+ &Debug(5, "No new work requests, server connection going idle");
$IdleConnections->push($Socket);
}
}
@@ -456,7 +525,7 @@ sub ClientWritable {
# request.
&Debug(9,"Send result is ".$result." Defined: ".defined($result));
- if(defined($result)) {
+ if($result ne undef) {
&Debug(9, "send result was defined");
if($result == length($Data)) { # Entire string sent.
&Debug(9, "ClientWritable data all written");
@@ -475,7 +544,7 @@ sub ClientWritable {
} else { # Partial string sent.
$Watcher->data(substr($Data, $result));
if($result == 0) { # client hung up on us!!
- Log("INFO", "lonc pipe client hung up on us!");
+ # Log("INFO", "lonc pipe client hung up on us!");
$Watcher->cancel;
$Socket->shutdown(2);
$Socket->close();
@@ -527,20 +596,25 @@ The transaction that is being completed.
=cut
sub CompleteTransaction {
- &Debug(6,"Complete transaction");
- my $Socket = shift;
- my $Transaction = shift;
+ &Debug(5,"Complete transaction");
+
+ my ($Socket, $Transaction) = @_;
if (!$Transaction->isDeferred()) { # Normal transaction
my $data = $Socket->GetReply(); # Data to send.
+ if($LogTransactions) {
+ Log("SUCCESS", "Reply from lond: '$data'");
+ }
StartClientReply($Transaction, $data);
} else { # Delete deferred transaction file.
Log("SUCCESS", "A delayed transaction was completed");
- LogPerm("S:$Client:".$Transaction->getRequest());
+ LogPerm("S:$Transaction->getClient() :".$Transaction->getRequest());
unlink $Transaction->getFile();
}
}
+
=pod
+
=head1 StartClientReply
Initiates a reply to a client where the reply data is a parameter.
@@ -556,17 +630,16 @@ sub CompleteTransaction {
The data to send to apached client.
=cut
+
sub StartClientReply {
- my $Transaction = shift;
- my $data = shift;
+ my ($Transaction, $data) = @_;
my $Client = $Transaction->getClient();
&Debug(8," Reply was: ".$data);
my $Serial = $ActiveClients{$Client};
my $desc = sprintf("Connection to lonc client %d",
-
$Serial);
Event->io(fd => $Client,
poll => "w",
@@ -574,7 +647,9 @@ sub StartClientReply {
cb => \&ClientWritable,
data => $data);
}
+
=pod
+
=head2 FailTransaction
Finishes a transaction with failure because the associated lond socket
@@ -584,8 +659,7 @@ sub StartClientReply {
- The transaction is 'live' in which case we initiate the sending
of "con_lost" to the client.
-Deleting the transaction means killing it from the
-%ActiveTransactions hash.
+Deleting the transaction means killing it from the %ActiveTransactions hash.
Parameters:
@@ -593,10 +667,18 @@ Parameters:
The LondTransaction we are failing.
+
=cut
sub FailTransaction {
my $transaction = shift;
+
+ # If the socket is dead, that's already logged.
+
+ if ($ConnectionRetriesLeft > 0) {
+ Log("WARNING", "Failing transaction "
+ .$transaction->getRequest());
+ }
Debug(1, "Failing transaction: ".$transaction->getRequest());
if (!$transaction->isDeferred()) { # If the transaction is deferred we'll get to it.
my $client = $transaction->getClient();
@@ -607,13 +689,16 @@ sub FailTransaction {
}
=pod
+
=head1 EmptyQueue
Fails all items in the work queue with con_lost.
Note that each item in the work queue is a transaction.
=cut
+
sub EmptyQueue {
+ $ConnectionRetriesLeft--; # Counts as connection failure too.
while($WorkQueue->Count()) {
my $request = $WorkQueue->dequeue(); # This is a transaction
FailTransaction($request);
@@ -627,12 +712,15 @@ sub EmptyQueue {
Close all connections open on lond prior to exit e.g.
=cut
+
sub CloseAllLondConnections {
- foreach $Socket (keys %ActiveConnections) {
- KillSocket($Socket);
+ foreach my $Socket (keys %ActiveConnections) {
+ if(exists($ActiveTransactions{$Socket})) {
+ FailTransaction($ActiveTransactions{$Socket});
+ }
+ KillSocket($Socket);
}
}
-=cut
=pod
@@ -654,11 +742,12 @@ Parameters:
nonzero if we are allowed to create a new connection.
-
=cut
+
sub KillSocket {
my $Socket = shift;
+ Log("WARNING", "Shutting down a socket");
$Socket->Shutdown();
# If the socket came from the active connection set,
@@ -672,14 +761,15 @@ sub KillSocket {
}
if(exists($ActiveConnections{$Socket})) {
delete($ActiveConnections{$Socket});
+ $ConnectionCount--;
+ if ($ConnectionCount < 0) { $ConnectionCount = 0; }
}
- $ConnectionCount--;
-
# If the connection count has gone to zero and there is work in the
# work queue, the work all gets failed with con_lost.
#
if($ConnectionCount == 0) {
- EmptyQueue;
+ EmptyQueue();
+ CloseAllLondConnections; # Should all already be closed but...
}
}
@@ -705,6 +795,17 @@ The connection must echo the challenge b
The challenge has been replied to. The we are receiveing the
'ok' from the partner.
+=head3 State=ReadingVersionString
+
+We have requested the lond version and are reading the
+version back. Upon completion, we'll store the version away
+for future use(?).
+
+=head3 State=HostSet
+
+We have selected the domain name of our peer (multhomed hosts)
+and are getting the reply (presumably ok) back.
+
=head3 State=RequestingKey
The ok has been received and we need to send the request for
@@ -748,25 +849,33 @@ sub LondReadable {
my $Socket = $Watcher->data;
my $client = undef;
- &Debug(6,"LondReadable called state = ".$State);
+ &Debug(6,"LondReadable called state = ".$Socket->GetState());
my $State = $Socket->GetState(); # All action depends on the state.
SocketDump(6, $Socket);
my $status = $Socket->Readable();
+
&Debug(2, "Socket->Readable returned: $status");
if($status != 0) {
- # bad return from socket read. Currently this means that
+ # bad return from socket read. Currently this means that
# The socket has become disconnected. We fail the transaction.
+ Log("WARNING",
+ "Lond connection lost.");
if(exists($ActiveTransactions{$Socket})) {
- Debug(3,"Lond connection lost failing transaction");
FailTransaction($ActiveTransactions{$Socket});
+ } else {
+ # Socket is connecting and failed... need to mark
+ # no longer connecting.
+
+ $LondConnecting = 0;
}
$Watcher->cancel();
KillSocket($Socket);
+ $ConnectionRetriesLeft--; # Counts as connection failure
return;
}
SocketDump(6,$Socket);
@@ -774,19 +883,34 @@ sub LondReadable {
$State = $Socket->GetState(); # Update in case of transition.
&Debug(6, "After read, state is ".$State);
- if($State eq "Initialized") {
+ if($State eq "Initialized") {
} elsif ($State eq "ChallengeReceived") {
# The challenge must be echoed back; The state machine
# in the connection takes care of setting that up. Just
# need to transition to writable:
-
+
$Watcher->cb(\&LondWritable);
$Watcher->poll("w");
} elsif ($State eq "ChallengeReplied") {
+ } elsif ($State eq "RequestingVersion") {
+ # Need to ask for the version... that is writiability:
+
+ $Watcher->cb(\&LondWritable);
+ $Watcher->poll("w");
+
+ } elsif ($State eq "ReadingVersionString") {
+ # Read the rest of the version string...
+ } elsif ($State eq "SetHost") {
+ # Need to request the actual domain get set...
+
+ $Watcher->cb(\&LondWritable);
+ $Watcher->poll("w");
+ } elsif ($State eq "HostSet") {
+ # Reading the 'ok' from the peer.
} elsif ($State eq "RequestingKey") {
# The ok was received. Now we need to request the key
@@ -798,11 +922,23 @@ sub LondReadable {
} elsif ($State eq "ReceivingKey") {
} elsif ($State eq "Idle") {
+
+ # This is as good a spot as any to get the peer version
+ # string:
+
+ if($LondVersion eq "unknown") {
+ $LondVersion = $Socket->PeerVersion();
+ Log("INFO", "Connected to lond version: $LondVersion");
+ }
# If necessary, complete a transaction and then go into the
# idle queue.
+ # Note that a trasition to idle indicates a live lond
+ # on the other end so reset the connection retries.
+ #
+ $ConnectionRetriesLeft = $ConnectionRetries; # success resets the count
$Watcher->cancel();
if(exists($ActiveTransactions{$Socket})) {
- Debug(8,"Completing transaction!!");
+ Debug(5,"Completing transaction!!");
CompleteTransaction($Socket,
$ActiveTransactions{$Socket});
} else {
@@ -810,6 +946,10 @@ sub LondReadable {
.$RemoteHost." now ready for action");
}
ServerToIdle($Socket); # Next work unit or idle.
+
+ #
+ $LondConnecting = 0; # Best spot I can think of for this.
+ #
} elsif ($State eq "SendingRequest") {
# We need to be writable for this and probably don't belong
@@ -823,7 +963,7 @@ sub LondReadable {
} else {
- # Invalid state.
+ # Invalid state.
Debug(4, "Invalid state in LondReadable");
}
}
@@ -905,20 +1045,40 @@ sub LondWritable {
SocketDump(6,$Socket);
+ # If the socket is writable, we must always write.
+ # Only by writing will we undergo state transitions.
+ # Old logic wrote in state specific code below, however
+ # That forces us at least through another invocation of
+ # this function after writability is possible again.
+ # This logic also factors out common code for handling
+ # write failures... in all cases, write failures
+ # Kill the socket.
+ # This logic makes the branches of the >big< if below
+ # so that the writing states are actually NO-OPs.
+
+ if ($Socket->Writable() != 0) {
+ # The write resulted in an error.
+ # We'll treat this as if the socket got disconnected:
+ Log("WARNING", "Connection to ".$RemoteHost.
+ " has been disconnected");
+ if(exists($ActiveTransactions{$Socket})) {
+ FailTransaction($ActiveTransactions{$Socket});
+ } else {
+ # In the process of conneting, so need to turn that off.
+
+ $LondConnecting = 0;
+ }
+ $Watcher->cancel();
+ KillSocket($Socket);
+ return;
+ }
+
+
+
if ($State eq "Connected") {
- if ($Socket->Writable() != 0) {
- # The write resulted in an error.
- # We'll treat this as if the socket got disconnected:
- Log("WARNING", "Connection to ".$RemoteHost.
- " has been disconnected");
- $Watcher->cancel();
- KillSocket($Socket);
- return;
- }
# "init" is being sent...
-
-
+
} elsif ($State eq "Initialized") {
# Now that init was sent, we switch
@@ -926,40 +1086,43 @@ sub LondWritable {
$Watcher->cb(\&LondReadable);
$Watcher->poll("r");
-
+
} elsif ($State eq "ChallengeReceived") {
# We received the challenge, now we
# are echoing it back. This is a no-op,
# we're waiting for the state to change
- if($Socket->Writable() != 0) {
-
- $Watcher->cancel();
- KillSocket($Socket);
- return;
- }
-
} elsif ($State eq "ChallengeReplied") {
# The echo was sent back, so we switch
# to watching readability.
$Watcher->cb(\&LondReadable);
$Watcher->poll("r");
+ } elsif ($State eq "RequestingVersion") {
+ # Sending the peer a version request...
+
+ } elsif ($State eq "ReadingVersionString") {
+ # Transition to read since we have sent the
+ # version command and now just need to read the
+ # version string from the peer:
+
+ $Watcher->cb(\&LondReadable);
+ $Watcher->poll("r");
+
+ } elsif ($State eq "SetHost") {
+ # Setting the remote domain...
+
+ } elsif ($State eq "HostSet") {
+ # Back to readable to get the ok.
+
+ $Watcher->cb(\&LondReadable);
+ $Watcher->poll("r");
+
} elsif ($State eq "RequestingKey") {
# At this time we're requesting the key.
# again, this is essentially a no-op.
- # we'll write the next chunk until the
- # state changes.
-
- if($Socket->Writable() != 0) {
- # Write resulted in an error.
- $Watcher->cancel();
- KillSocket($Socket);
- return;
-
- }
} elsif ($State eq "ReceivingKey") {
# Now we need to wait for the key
# to come back from the peer:
@@ -968,20 +1131,10 @@ sub LondWritable {
$Watcher->poll("r");
} elsif ($State eq "SendingRequest") {
+
# At this time we are sending a request to the
# peer... write the next chunk:
- if($Socket->Writable() != 0) {
-
- if(exists($ActiveTransactions{$Socket})) {
- Debug(3, "Lond connection lost, failing transactions");
- FailTransaction($ActiveTransactions{$Socket});
- }
- $Watcher->cancel();
- KillSocket($Socket);
- return;
-
- }
} elsif ($State eq "ReceivingReply") {
# The send has completed. Wait for the
@@ -1003,6 +1156,7 @@ sub LondWritable {
=pod
=cut
+
sub QueueDelayed {
Debug(3,"QueueDelayed called");
@@ -1011,8 +1165,7 @@ sub QueueDelayed {
Debug(4, "Delayed path: ".$path);
opendir(DIRHANDLE, $path);
- @alldelayed = grep /\.$RemoteHost$/, readdir DIRHANDLE;
- Debug(4, "Got ".$alldelayed." delayed files");
+ my @alldelayed = grep /\.$RemoteHost$/, readdir DIRHANDLE;
closedir(DIRHANDLE);
my $dfname;
my $reqfile;
@@ -1049,32 +1202,35 @@ sub MakeLondConnection {
my $Connection = LondConnection->new(&GetServerHost(),
&GetServerPort());
- if($Connection == undef) { # Needs to be more robust later.
+ if($Connection eq undef) { # Needs to be more robust later.
Log("CRITICAL","Failed to make a connection with lond.");
$ConnectionRetriesLeft--;
return 0; # Failure.
} else {
- $ConnectionRetriesLeft = $ConnectionRetries; # success resets the count
+
# The connection needs to have writability
# monitored in order to send the init sequence
# that starts the whole authentication/key
# exchange underway.
#
my $Socket = $Connection->GetSocket();
- if($Socket == undef) {
- die "did not get a socket from the connection";
+ if($Socket eq undef) {
+ &child_exit(-1, "did not get a socket from the connection");
} else {
&Debug(9,"MakeLondConnection got socket: ".$Socket);
}
-
- $event = Event->io(fd => $Socket,
+ $Connection->SetTimeoutCallback(\&SocketTimeout);
+
+ my $event = Event->io(fd => $Socket,
poll => 'w',
cb => \&LondWritable,
data => $Connection,
desc => 'Connection to lond server');
$ActiveConnections{$Connection} = $event;
-
+ if ($ConnectionCount == 0) {
+ &SetupTimer; # Need to handle timeouts with connections...
+ }
$ConnectionCount++;
Debug(4, "Connection count = ".$ConnectionCount);
if($ConnectionCount == 1) { # First Connection:
@@ -1082,6 +1238,7 @@ sub MakeLondConnection {
}
Log("SUCESS", "Created connection ".$ConnectionCount
." to host ".GetServerHost());
+ $LondConnecting = 1; # Connection in progress.
return 1; # Return success.
}
@@ -1113,8 +1270,8 @@ The text of the request to send.
=cut
sub StartRequest {
- my $Lond = shift;
- my $Request = shift; # This is a LondTransaction.
+
+ my ($Lond, $Request) = @_;
Debug(6, "StartRequest: ".$Request->getRequest());
@@ -1124,7 +1281,7 @@ sub StartRequest {
$ActiveTransactions{$Lond} = $Request;
$Lond->InitiateTransaction($Request->getRequest());
- $event = Event->io(fd => $Socket,
+ my $event = Event->io(fd => $Socket,
poll => "w",
cb => \&LondWritable,
data => $Lond,
@@ -1163,11 +1320,23 @@ sub QueueTransaction {
my $LondSocket = $IdleConnections->pop();
if(!defined $LondSocket) { # Need to queue request.
- Debug(8,"Must queue...");
+ Debug(5,"Must queue...");
$WorkQueue->enqueue($requestData);
- if($ConnectionCount < $MaxConnectionCount) {
- Debug(4,"Starting additional lond connection");
- MakeLondConnection();
+ Debug(5, "Queue Transaction startnew $ConnectionCount $LondConnecting");
+ if(($ConnectionCount < $MaxConnectionCount) && (! $LondConnecting)) {
+
+ if($ConnectionRetriesLeft > 0) {
+ Debug(5,"Starting additional lond connection");
+ if(&MakeLondConnection() == 0) {
+ EmptyQueue(); # Fail transactions, can't make connection.
+ CloseAllLondConnections; # Should all be closed but...
+ }
+ } else {
+ ShowStatus(GetServerHost()." >>> DEAD !!!! <<<");
+ $LondConnecting = 0;
+ EmptyQueue(); # It's worse than that ... he's dead Jim.
+ CloseAllLondConnections; # Should all be closed but..
+ }
}
} else { # Can start the request:
Debug(8,"Can start...");
@@ -1198,7 +1367,7 @@ sub ClientRequest {
my $rv = $socket->recv($thisread, POSIX::BUFSIZ, 0);
Debug(8, "rcv: data length = ".length($thisread)
." read =".$thisread);
- unless (defined $rv && length($thisread)) {
+ unless (defined $rv && length($thisread)) {
# Likely eof on socket.
Debug(5,"Client Socket closed on lonc for ".$RemoteHost);
close($socket);
@@ -1209,7 +1378,7 @@ sub ClientRequest {
Debug(8,"Data: ".$data." this read: ".$thisread);
$data = $data.$thisread; # Append new data.
$watcher->data($data);
- if($data =~ /(.*\n)/) { # Request entirely read.
+ if($data =~ /\n$/) { # Request entirely read.
if($data eq "close_connection_exit\n") {
Log("CRITICAL",
"Request Close Connection ... exiting");
@@ -1217,6 +1386,9 @@ sub ClientRequest {
exit;
}
Debug(8, "Complete transaction received: ".$data);
+ if($LogTransactions) {
+ Log("SUCCESS", "Transaction: '$data'"); # Transaction has \n.
+ }
my $Transaction = LondTransaction->new($data);
$Transaction->SetClient($socket);
QueueTransaction($Transaction);
@@ -1225,6 +1397,40 @@ sub ClientRequest {
}
+#
+# Accept a connection request for a client (lonc child) and
+# start up an event watcher to keep an eye on input from that
+# Event. This can be called both from NewClient and from
+# ChildProcess if we are started in DieWhenIdle mode.
+# Parameters:
+# $socket - The listener socket.
+# Returns:
+# NONE
+# Side Effects:
+# An event is made to watch the accepted connection.
+# Active clients hash is updated to reflect the new connection.
+# The client connection count is incremented.
+#
+sub accept_client {
+ my ($socket) = @_;
+
+ Debug(8, "Entering accept for lonc UNIX socket\n");
+ my $connection = $socket->accept(); # Accept the client connection.
+ Debug(8,"Connection request accepted from "
+ .GetPeername($connection, AF_UNIX));
+
+
+ my $description = sprintf("Connection to lonc client %d",
+ $ClientConnection);
+ Debug(9, "Creating event named: ".$description);
+ Event->io(cb => \&ClientRequest,
+ poll => 'r',
+ desc => $description,
+ data => "",
+ fd => $connection);
+ $ActiveClients{$connection} = $ClientConnection;
+ $ClientConnection++;
+}
=pod
@@ -1243,21 +1449,8 @@ sub NewClient {
my $event = shift; # Get the event parameters.
my $watcher = $event->w;
my $socket = $watcher->fd; # Get the event' socket.
- my $connection = $socket->accept(); # Accept the client connection.
- Debug(8,"Connection request accepted from "
- .GetPeername($connection, AF_UNIX));
-
- my $description = sprintf("Connection to lonc client %d",
- $ClientConnection);
- Debug(9, "Creating event named: ".$description);
- Event->io(cb => \&ClientRequest,
- poll => 'r',
- desc => $description,
- data => "",
- fd => $connection);
- $ActiveClients{$connection} = $ClientConnection;
- $ClientConnection++;
+ &accept_client($socket);
}
=pod
@@ -1267,10 +1460,20 @@ sub NewClient {
Returns the name of the UNIX socket on which to listen for client
connections.
+=head2 Parameters:
+
+ host (optional) - Name of the host socket to return.. defaults to
+ the return from GetServerHost().
+
=cut
sub GetLoncSocketPath {
- return $UnixSocketDir."/".GetServerHost();
+
+ my $host = GetServerHost(); # Default host.
+ if (@_) {
+ ($host) = @_; # Override if supplied.
+ }
+ return $UnixSocketDir."/".$host;
}
=pod
@@ -1307,22 +1510,50 @@ connection. The event handler establish
(creating a communcations channel), that int turn will establish
another event handler to subess requests.
+=head2 Parameters:
+
+ host (optional) Name of the host to set up a unix socket to.
+
=cut
sub SetupLoncListener {
+ my $host = GetServerHost(); # Default host.
+ if (@_) {
+ ($host) = @_ # Override host with parameter.
+ }
+
my $socket;
- my $SocketName = GetLoncSocketPath();
+ my $SocketName = GetLoncSocketPath($host);
unlink($SocketName);
unless ($socket =IO::Socket::UNIX->new(Local => $SocketName,
- Listen => 10,
+ Listen => 250,
Type => SOCK_STREAM)) {
- die "Failed to create a lonc listner socket";
+ if($I_am_child) {
+ &child_exit(-1, "Failed to create a lonc listener socket");
+ } else {
+ die "Failed to create a lonc listner socket";
+ }
}
- Event->io(cb => \&NewClient,
- poll => 'r',
- desc => 'Lonc listener Unix Socket',
- fd => $socket);
+ return $socket;
+}
+
+#
+# Toggle transaction logging.
+# Implicit inputs:
+# LogTransactions
+# Implicit Outputs:
+# LogTransactions
+sub ToggleTransactionLogging {
+ print STDERR "Toggle transaction logging...\n";
+ if(!$LogTransactions) {
+ $LogTransactions = 1;
+ } else {
+ $LogTransactions = 0;
+ }
+
+
+ Log("SUCCESS", "Toggled transaction logging: $LogTransactions \n");
}
=pod
@@ -1332,16 +1563,42 @@ sub SetupLoncListener {
Child USR1 signal handler to report the most recent status
into the status file.
+We also use this to reset the retries count in order to allow the
+client to retry connections with a previously dead server.
+
=cut
+
sub ChildStatus {
my $event = shift;
my $watcher = $event->w;
Debug(2, "Reporting child status because : ".$watcher->data);
my $docdir = $perlvar{'lonDocRoot'};
- my $fh = IO::File->new(">>$docdir/lon-status/loncstatus.txt");
- print $fh $$."\t".$RemoteHost."\t".$Status."\t".
+
+ open(LOG,">>$docdir/lon-status/loncstatus.txt");
+ flock(LOG,LOCK_EX);
+ print LOG $$."\t".$RemoteHost."\t".$Status."\t".
$RecentLogEntry."\n";
+ #
+ # Write out information about each of the connections:
+ #
+ if ($DebugLevel > 2) {
+ print LOG "Active connection statuses: \n";
+ my $i = 1;
+ print STDERR "================================= Socket Status Dump:\n";
+ foreach my $item (keys %ActiveConnections) {
+ my $Socket = $ActiveConnections{$item}->data;
+ my $state = $Socket->GetState();
+ print LOG "Connection $i State: $state\n";
+ print STDERR "---------------------- Connection $i \n";
+ $Socket->Dump(-1); # Ensure it gets dumped..
+ $i++;
+ }
+ }
+ flock(LOG,LOCK_UN);
+ close(LOG);
+ $ConnectionRetriesLeft = $ConnectionRetries;
+ UpdateStatus();
}
=pod
@@ -1358,34 +1615,81 @@ sub SignalledToDeath {
my $watcher= $event->w;
Debug(2,"Signalled to death! via ".$watcher->data);
- my ($signal) = @_;
+ my ($signal) = $watcher->data;
chomp($signal);
Log("CRITICAL", "Abnormal exit. Child $$ for $RemoteHost "
."died through "."\"$signal\"");
- LogPerm("F:lonc: $$ on $RemoteHost signalled to death: "
- ."\"$signal\"");
- die("Signal abnormal end");
+ #LogPerm("F:lonc: $$ on $RemoteHost signalled to death: "
+# ."\"$signal\"");
exit 0;
}
+
+=pod
+
+=head2 ToggleDebug
+
+This sub toggles trace debugging on and off.
+
+=cut
+
+sub ToggleDebug {
+ my $Current = $DebugLevel;
+ $DebugLevel = $NextDebugLevel;
+ $NextDebugLevel = $Current;
+
+ Log("SUCCESS", "New debugging level for $RemoteHost now $DebugLevel");
+
+}
+
+=pod
+
=head2 ChildProcess
This sub implements a child process for a single lonc daemon.
+Optional parameter:
+ $socket - if provided, this is a socket already open for listen
+ on the client socket. Otherwise, a new listen is set up.
=cut
sub ChildProcess {
+ # If we are in DieWhenIdle mode, we've inherited all the
+ # events of our parent and those have to be cancelled or else
+ # all holy bloody chaos will result.. trust me, I already made
+ # >that< mistake.
+
+ my $host = GetServerHost();
+ foreach my $listener (keys %parent_dispatchers) {
+ my $watcher = $parent_dispatchers{$listener};
+ my $s = $watcher->fd;
+ if ($listener ne $host) { # Close everyone but me.
+ Debug(5, "Closing listen socket for $listener");
+ $s->close();
+ }
+ Debug(5, "Killing watcher for $listener");
+
+ $watcher->cancel();
+ delete($parent_dispatchers{$listener});
+
+ }
+
+ # kill off the parent's signal handlers too!
+ #
+
+ for my $handler (keys %parent_handlers) {
+ my $watcher = $parent_handlers{$handler};
+ $watcher->cancel();
+ delete($parent_handlers{$handler});
+ }
+
+ $I_am_child = 1; # Seems like in spite of it all I may still getting
+ # parent event dispatches.. flag I'm a child.
#
# Signals must be handled by the Event framework...
-#
-# $SIG{QUIT} = \&SignalledToDeath;
-# $SIG{HUP} = \&ChildStatus;
-# $SIG{USR1} = IGNORE;
-# $SIG{INT} = DEFAULT;
-# $SIG{CHLD} = IGNORE;
-# $SIG{__DIE__} = \&SignalledToDeath;
+ #
Event->signal(signal => "QUIT",
cb => \&SignalledToDeath,
@@ -1396,10 +1700,27 @@ sub ChildProcess {
Event->signal(signal => "USR1",
cb => \&ChildStatus,
data => "USR1");
+ Event->signal(signal => "USR2",
+ cb => \&ToggleTransactionLogging);
+ Event->signal(signal => "INT",
+ cb => \&ToggleDebug,
+ data => "INT");
- SetupTimer();
-
- SetupLoncListener();
+ # Figure out if we got passed a socket or need to open one to listen for
+ # client requests.
+
+ my ($socket) = @_;
+ if (!$socket) {
+
+ $socket = SetupLoncListener();
+ }
+ # Establish an event to listen for client connection requests.
+
+
+ Event->io(cb => \&NewClient,
+ poll => 'r',
+ desc => 'Lonc Listener Unix Socket',
+ fd => $socket);
$Event::Debuglevel = $DebugLevel;
@@ -1407,37 +1728,193 @@ sub ChildProcess {
# Setup the initial server connection:
- # &MakeLondConnection(); // let first work requirest do it.
+ # &MakeLondConnection(); // let first work request do it.
+ # If We are in diwhenidle, need to accept the connection since the
+ # event may not fire.
+
+ if ($DieWhenIdle) {
+ &accept_client($socket);
+ }
Debug(9,"Entering event loop");
my $ret = Event::loop(); # Start the main event loop.
- die "Main event loop exited!!!";
+ &child_exit (-1,"Main event loop exited!!!");
}
# Create a new child for host passed in:
sub CreateChild {
+ my ($host, $socket) = @_;
+
my $sigset = POSIX::SigSet->new(SIGINT);
sigprocmask(SIG_BLOCK, $sigset);
- my $host = shift;
$RemoteHost = $host;
Log("CRITICAL", "Forking server for ".$host);
- $pid = fork;
+ my $pid = fork;
if($pid) { # Parent
- $ChildHash{$pid} = $RemoteHost;
+ $RemoteHost = "Parent";
+ $ChildHash{$pid} = $host;
+ $HostToPid{$host}= $pid;
sigprocmask(SIG_UNBLOCK, $sigset);
} else { # child.
ShowStatus("Connected to ".$RemoteHost);
- $SIG{INT} = DEFAULT;
+ $SIG{INT} = 'DEFAULT';
sigprocmask(SIG_UNBLOCK, $sigset);
- ChildProcess; # Does not return.
+ if(defined $socket) {
+ &ChildProcess($socket);
+ } else {
+ ChildProcess; # Does not return.
+ }
+ }
+}
+
+# parent_client_connection:
+# Event handler that processes client connections for the parent process.
+# This sub is called when the parent is listening on a socket and
+# a connection request arrives. We must:
+# Start a child process to accept the connection request.
+# Kill our listen on the socket.
+# Parameter:
+# event - The event object that was created to monitor this socket.
+# event->w->fd is the socket.
+# Returns:
+# NONE
+#
+sub parent_client_connection {
+ if ($I_am_child) {
+ # Should not get here, but seem to anyway:
+ &Debug(5," Child caught parent client connection event!!");
+ my ($event) = @_;
+ my $watcher = $event->w;
+ $watcher->cancel(); # Try to kill it off again!!
+ } else {
+ &Debug(9, "parent_client_connection");
+ my ($event) = @_;
+ my $watcher = $event->w;
+ my $socket = $watcher->fd;
+
+ # Lookup the host associated with this socket:
+
+ my $host = $listening_to{$socket};
+
+ # Start the child:
+
+
+
+ &Debug(9,"Creating child for $host (parent_client_connection)");
+ &CreateChild($host, $socket);
+
+ # Clean up the listen since now the child takes over until it exits.
+
+ $watcher->cancel(); # Nolonger listening to this event
+ delete($listening_to{$socket});
+ delete($parent_dispatchers{$host});
+ $socket->close();
}
+}
+
+# parent_listen:
+# Opens a socket and starts a listen for the parent process on a client UNIX
+# domain socket.
+#
+# This involves:
+# Creating a socket for listen.
+# Removing any socket lock file
+# Adding an event handler for this socket becoming readable
+# To the parent's event dispatcher.
+# Parameters:
+# loncapa_host - LonCAPA cluster name of the host represented by the client
+# socket.
+# Returns:
+# NONE
+#
+sub parent_listen {
+ my ($loncapa_host) = @_;
+ Debug(5, "parent_listen: $loncapa_host");
+
+ my $socket = &SetupLoncListener($loncapa_host);
+ $listening_to{$socket} = $loncapa_host;
+ if (!$socket) {
+ die "Unable to create a listen socket for $loncapa_host";
+ }
+
+ my $lock_file = &GetLoncSocketPath($loncapa_host).".lock";
+ unlink($lock_file); # No problem if it doesn't exist yet [startup e.g.]
+
+ my $watcher = Event->io(cb => \&parent_client_connection,
+ poll => 'r',
+ desc => "Parent listener unix socket ($loncapa_host)",
+ fd => $socket);
+ $parent_dispatchers{$loncapa_host} = $watcher;
}
+
+
+# listen_on_all_unix_sockets:
+# This sub initiates a listen on all unix domain lonc client sockets.
+# This will be called in the case where we are trimming idle processes.
+# When idle processes are trimmed, loncnew starts up with no children,
+# and only spawns off children when a connection request occurs on the
+# client unix socket. The spawned child continues to run until it has
+# been idle a while at which point it eventually exits and once more
+# the parent picks up the listen.
+#
+# Parameters:
+# NONE
+# Implicit Inputs:
+# The configuration file that has been read in by LondConnection.
+# Returns:
+# NONE
+#
+sub listen_on_all_unix_sockets {
+ Debug(5, "listen_on_all_unix_sockets");
+ my $host_iterator = &LondConnection::GetHostIterator();
+ while (!$host_iterator->end()) {
+ my $host_entry_ref = $host_iterator->get();
+ my $host_name = $host_entry_ref->[0];
+ Debug(9, "Listen for $host_name");
+ &parent_listen($host_name);
+ $host_iterator->next();
+ }
+}
+
+# server_died is called whenever a child process exits.
+# Since this is dispatched via a signal, we must process all
+# dead children until there are no more left. The action
+# is to:
+# - Remove the child from the bookeeping hashes
+# - Re-establish a listen on the unix domain socket associated
+# with that host.
+# Parameters:
+# The event, but we don't actually care about it.
+sub server_died {
+ &Debug(9, "server_died called...");
+
+ while(1) { # Loop until waitpid nowait fails.
+ my $pid = waitpid(-1, WNOHANG);
+ if($pid <= 0) {
+ return; # Nothing left to wait for.
+ }
+ # need the host to restart:
+
+ my $host = $ChildHash{$pid};
+ if($host) { # It's for real...
+ &Debug(9, "Caught sigchild for $host");
+ delete($ChildHash{$pid});
+ delete($HostToPid{$host});
+ &parent_listen($host);
+
+ } else {
+ &Debug(5, "Caught sigchild for pid not in hosts hash: $pid");
+ }
+ }
+
+}
+
#
# Parent process logic pass 1:
# For each entry in the hosts table, we will
@@ -1469,11 +1946,13 @@ if ($childpid != 0) {
#
ShowStatus("Parent writing pid file:");
-$execdir = $perlvar{'lonDaemons'};
+my $execdir = $perlvar{'lonDaemons'};
open (PIDSAVE, ">$execdir/logs/lonc.pid");
print PIDSAVE "$$\n";
close(PIDSAVE);
+
+
if (POSIX::setsid() < 0) {
print "Could not create new session\n";
exit -1;
@@ -1483,42 +1962,93 @@ ShowStatus("Forking node servers");
Log("CRITICAL", "--------------- Starting children ---------------");
+LondConnection::ReadConfig; # Read standard config files.
my $HostIterator = LondConnection::GetHostIterator;
-while (! $HostIterator->end()) {
- $hostentryref = $HostIterator->get();
- CreateChild($hostentryref->[0]);
- $HostIterator->next();
+if ($DieWhenIdle) {
+ $RemoteHost = "[parent]";
+ &listen_on_all_unix_sockets();
+} else {
+
+ while (! $HostIterator->end()) {
+
+ my $hostentryref = $HostIterator->get();
+ CreateChild($hostentryref->[0]);
+ $HostHash{$hostentryref->[0]} = $hostentryref->[4];
+ $HostIterator->next();
+ }
}
+
$RemoteHost = "Parent Server";
# Maintain the population:
ShowStatus("Parent keeping the flock");
-#
-# Set up parent signals:
-#
-$SIG{INT} = \&Terminate;
-$SIG{TERM} = \&Terminate;
-$SIG{HUP} = \&Restart;
-$SIG{USR1} = \&CheckKids;
-
-while(1) {
- $deadchild = wait();
- if(exists $ChildHash{$deadchild}) { # need to restart.
- $deadhost = $ChildHash{$deadchild};
- delete($ChildHash{$deadchild});
- Log("WARNING","Lost child pid= ".$deadchild.
- "Connected to host ".$deadhost);
- Log("INFO", "Restarting child procesing ".$deadhost);
- CreateChild($deadhost);
+if ($DieWhenIdle) {
+ # We need to setup a SIGChild event to handle the exit (natural or otherwise)
+ # of the children.
+
+ Event->signal(cb => \&server_died,
+ desc => "Child exit handler",
+ signal => "CHLD");
+
+
+ # Set up all the other signals we set up. We'll vector them off to the
+ # same subs as we would for DieWhenIdle false and, if necessary, conditionalize
+ # the code there.
+
+ $parent_handlers{INT} = Event->signal(cb => \&Terminate,
+ desc => "Parent INT handler",
+ signal => "INT");
+ $parent_handlers{TERM} = Event->signal(cb => \&Terminate,
+ desc => "Parent TERM handler",
+ signal => "TERM");
+ $parent_handlers{HUP} = Event->signal(cb => \&Restart,
+ desc => "Parent HUP handler.",
+ signal => "HUP");
+ $parent_handlers{USR1} = Event->signal(cb => \&CheckKids,
+ desc => "Parent USR1 handler",
+ signal => "USR1");
+ $parent_handlers{USR2} = Event->signal(cb => \&UpdateKids,
+ desc => "Parent USR2 handler.",
+ signal => "USR2");
+
+ # Start procdesing events.
+
+ $Event::DebugLevel = $DebugLevel;
+ Debug(9, "Parent entering event loop");
+ my $ret = Event::loop();
+ die "Main Event loop exited: $ret";
+
+
+} else {
+ #
+ # Set up parent signals:
+ #
+
+ $SIG{INT} = \&Terminate;
+ $SIG{TERM} = \&Terminate;
+ $SIG{HUP} = \&Restart;
+ $SIG{USR1} = \&CheckKids;
+ $SIG{USR2} = \&UpdateKids; # LonManage update request.
+
+ while(1) {
+ my $deadchild = wait();
+ if(exists $ChildHash{$deadchild}) { # need to restart.
+ my $deadhost = $ChildHash{$deadchild};
+ delete($HostToPid{$deadhost});
+ delete($ChildHash{$deadchild});
+ Log("WARNING","Lost child pid= ".$deadchild.
+ "Connected to host ".$deadhost);
+ Log("INFO", "Restarting child procesing ".$deadhost);
+ CreateChild($deadhost);
+ }
}
}
-
=pod
=head1 CheckKids
@@ -1538,13 +2068,58 @@ sub CheckKids {
my $now=time;
my $local=localtime($now);
print $fh "LONC status $local - parent $$ \n\n";
- foreach $pid (keys %ChildHash) {
+ foreach my $host (keys %parent_dispatchers) {
+ print $fh "LONC Parent process listening for $host\n";
+ }
+ foreach my $pid (keys %ChildHash) {
Debug(2, "Sending USR1 -> $pid");
kill 'USR1' => $pid; # Tell Child to report status.
- sleep 1; # Wait so file doesn't intermix.
}
+
+}
+
+=pod
+
+=head1 UpdateKids
+
+parent's SIGUSR2 handler. This handler:
+
+=item
+
+Rereads the hosts file.
+
+=item
+
+Kills off (via sigint) children for hosts that have disappeared.
+
+=item
+
+QUITs children for hosts that already exist (this just forces a status display
+and resets the connection retry count for that host.
+
+=item
+
+Starts new children for hosts that have been added to the hosts.tab file since
+the start of the master program and maintains them.
+
+=cut
+
+sub UpdateKids {
+
+ Log("INFO", "Updating connections via SIGUSR2");
+
+ # I'm not sure what I was thinking in the first implementation.
+ # someone will have to work hard to convince me the effect is any
+ # different than Restart, especially now that we don't start up
+ # per host servers automatically, may as well just restart.
+ # The down side is transactions that are in flight will get timed out
+ # (lost unless they are critical).
+
+ &Restart();
+
}
+
=pod
=head1 Restart
@@ -1556,11 +2131,11 @@ the config file.
=cut
sub Restart {
- KillThemAll; # First kill all the children.
+ &KillThemAll; # First kill all the children.
Log("CRITICAL", "Restarting");
my $execdir = $perlvar{'lonDaemons'};
unlink("$execdir/logs/lonc.pid");
- exec("$execdir/lonc");
+ exec("$executable");
}
=pod
@@ -1568,25 +2143,41 @@ sub Restart {
=head1 KillThemAll
Signal handler that kills all children by sending them a
-SIGINT. Responds to sigint and sigterm.
+SIGHUP. Responds to sigint and sigterm.
=cut
sub KillThemAll {
Debug(2, "Kill them all!!");
local($SIG{CHLD}) = 'IGNORE'; # Our children >will< die.
- foreach $pid (keys %ChildHash) {
+ foreach my $pid (keys %ChildHash) {
my $serving = $ChildHash{$pid};
- Debug(2, "Killing lonc for $serving pid = $pid");
- ShowStatus("Killing lonc for $serving pid = $pid");
- Log("CRITICAL", "Killing lonc for $serving pid = $pid");
- kill('INT', $pid);
- delete($ChildeHash{$pid});
+ ShowStatus("Nicely Killing lonc for $serving pid = $pid");
+ Log("CRITICAL", "Nicely Killing lonc for $serving pid = $pid");
+ kill 'QUIT' => $pid;
+ }
+
+
+}
+
+
+#
+# Kill all children via KILL. Just in case the
+# first shot didn't get them.
+
+sub really_kill_them_all_dammit
+{
+ Debug(2, "Kill them all Dammit");
+ local($SIG{CHLD} = 'IGNORE'); # In case some purist reenabled them.
+ foreach my $pid (keys %ChildHash) {
+ my $serving = $ChildHash{$pid};
+ &ShowStatus("Nastily killing lonc for $serving pid = $pid");
+ Log("CRITICAL", "Nastily killing lonc for $serving pid = $pid");
+ kill 'KILL' => $pid;
+ delete($ChildHash{$pid});
+ my $execdir = $perlvar{'lonDaemons'};
+ unlink("$execdir/logs/lonc.pid");
}
- my $execdir = $perlvar{'lonDaemons'};
- unlink("$execdir/logs/lonc.pid");
- ShowStatus("Killing the master process");
- Log("CRITICAL", "Killing the master process.");
}
=pod
@@ -1598,8 +2189,17 @@ Terminate the system.
=cut
sub Terminate {
- KillThemAll;
- exit;
+ &Log("CRITICAL", "Asked to kill children.. first be nice...");
+ &KillThemAll;
+ #
+ # By now they really should all be dead.. but just in case
+ # send them all SIGKILL's after a bit of waiting:
+
+ sleep(4);
+ &Log("CRITICAL", "Now kill children nasty");
+ &really_kill_them_all_dammit;
+ Log("CRITICAL","Master process exiting");
+ exit 0;
}
=pod
500 Internal Server Error
Internal Server Error
The server encountered an internal error or
misconfiguration and was unable to complete
your request.
Please contact the server administrator at
root@localhost to inform them of the time this error occurred,
and the actions you performed just before this error.
More information about this error may be available
in the server error log.