--- loncom/loncnew 2004/06/17 22:37:06 1.49 +++ loncom/loncnew 2006/01/27 16:35:13 1.73 @@ -2,7 +2,7 @@ # The LearningOnline Network with CAPA # lonc maintains the connections to remote computers # -# $Id: loncnew,v 1.49 2004/06/17 22:37:06 foxr Exp $ +# $Id: loncnew,v 1.73 2006/01/27 16:35:13 albertel Exp $ # # Copyright Michigan State University Board of Trustees # @@ -61,6 +61,7 @@ use LONCAPA::LondConnection; use LONCAPA::LondTransaction; use LONCAPA::Configuration; use LONCAPA::HashIterator; +use Fcntl qw(:flock); # Read the httpd configuration file to get perl variables @@ -75,16 +76,21 @@ my %perlvar = %{$perlvarref}; my %ChildHash; # by pid -> host. my %HostToPid; # By host -> pid. my %HostHash; # by loncapaname -> IP. +my %listening_to; # Socket->host table for who the parent + # is listening to. +my %parent_dispatchers; # host-> listener watcher events. +my %parent_handlers; # Parent signal handlers... my $MaxConnectionCount = 10; # Will get from config later. my $ClientConnection = 0; # Uniquifier for client events. my $DebugLevel = 0; my $NextDebugLevel= 2; # So Sigint can toggle this. -my $IdleTimeout= 3600; # Wait an hour before pruning connections. +my $IdleTimeout= 600; # Wait 10 minutes before pruning connections. my $LogTransactions = 0; # When True, all transactions/replies get logged. +my $executable = $0; # Get the full path to me. # # The variables below are only used by the child processes. @@ -100,10 +106,16 @@ my $ConnectionCount = 0; my $IdleSeconds = 0; # Number of seconds idle. my $Status = ""; # Current status string. my $RecentLogEntry = ""; -my $ConnectionRetries=2; # Number of connection retries allowed. -my $ConnectionRetriesLeft=2; # Number of connection retries remaining. +my $ConnectionRetries=5; # Number of connection retries allowed. +my $ConnectionRetriesLeft=5; # Number of connection retries remaining. my $LondVersion = "unknown"; # Version of lond we talk with. my $KeyMode = ""; # e.g. ssl, local, insecure from last connect. +my $LondConnecting = 0; # True when a connection is being built. + + + +my $DieWhenIdle = 1; # When true children die when trimmed -> 0. +my $I_am_child = 0; # True if this is the child process. # # The hash below gives the HTML format for log messages @@ -118,6 +130,20 @@ $LogFormats{"WARNING"} = "Dump(0); if(exists($ActiveTransactions{$Socket})) { FailTransaction($ActiveTransactions{$Socket}); @@ -274,10 +303,49 @@ sub SocketTimeout { # a connection failure: $ConnectionRetriesLeft--; if($ConnectionRetriesLeft <= 0) { - Log("CRITICAL", "Host marked dead: ".GetServerHost()); + Log("CRITICAL", "Host marked DEAD: ".GetServerHost()); + $LondConnecting = 0; } } +# +# This function should be called by the child in all cases where it must +# exit. If the child process is running with the DieWhenIdle turned on +# it must create a lock file for the AF_UNIX socket in order to prevent +# connection requests from lonnet in the time between process exit +# and the parent picking up the listen again. +# Parameters: +# exit_code - Exit status value, however see the next parameter. +# message - If this optional parameter is supplied, the exit +# is via a die with this message. +# +sub child_exit { + my ($exit_code, $message) = @_; + + # Regardless of how we exit, we may need to do the lock thing: + + if($DieWhenIdle) { + # + # Create a lock file since there will be a time window + # between our exit and the parent's picking up the listen + # during which no listens will be done on the + # lonnet client socket. + # + my $lock_file = GetLoncSocketPath().".lock"; + open(LOCK,">$lock_file"); + print LOCK "Contents not important"; + close(LOCK); + + exit(0); + } + # Now figure out how we exit: + + if($message) { + die $message; + } else { + exit($exit_code); + } +} #----------------------------- Timer management ------------------------ =pod @@ -290,14 +358,12 @@ Invoked each timer tick. sub Tick { + my ($Event) = @_; + my $clock_watcher = $Event->w; + my $client; - if($ConnectionRetriesLeft > 0) { - ShowStatus(GetServerHost()." Connection count: ".$ConnectionCount - ." Retries remaining: ".$ConnectionRetriesLeft - ." ($KeyMode)"); - } else { - ShowStatus(GetServerHost()." >> DEAD <<"); - } + UpdateStatus(); + # Is it time to prune connection count: @@ -307,6 +373,12 @@ sub Tick { if($IdleSeconds > $IdleTimeout) { # Prune a connection... my $Socket = $IdleConnections->pop(); KillSocket($Socket); + $IdleSeconds = 0; # Otherwise all connections get trimmed to fast. + UpdateStatus(); + if(($ConnectionCount == 0) && $DieWhenIdle) { + &child_exit(0); + + } } } else { $IdleSeconds = 0; # Reset idle count if not idle. @@ -325,23 +397,21 @@ sub Tick { # Do we have work in the queue, but no connections to service them? # If so, try to make some new connections to get things going again. # - + # Note this code is dead now... + # my $Requests = $WorkQueue->Count(); - if (($ConnectionCount == 0) && ($Requests > 0)) { + if (($ConnectionCount == 0) && ($Requests > 0) && (!$LondConnecting)) { if ($ConnectionRetriesLeft > 0) { - my $Connections = ($Requests <= $MaxConnectionCount) ? - $Requests : $MaxConnectionCount; - Debug(5,"Work but no connections, start ".$Connections." of them"); - my $successCount = 0; - for (my $i =0; $i < $Connections; $i++) { - $successCount += MakeLondConnection(); - } - if($successCount == 0) { # All connections failed: + Debug(5,"Work but no connections, Make a new one"); + my $success; + $success = &MakeLondConnection; + if($success == 0) { # All connections failed: Debug(5,"Work in queue failed to make any connectiouns\n"); EmptyQueue(); # Fail pending transactions with con_lost. CloseAllLondConnections(); # Should all be closed but.... } } else { + $LondConnecting = 0; ShowStatus(GetServerHost()." >>> DEAD!!! <<<"); Debug(5,"Work in queue, but gave up on connections..flushing\n"); EmptyQueue(); # Connections can't be established. @@ -351,7 +421,9 @@ sub Tick { } if ($ConnectionCount == 0) { $KeyMode = ""; + $clock_watcher->cancel(); } + &UpdateStatus(); } =pod @@ -472,7 +544,7 @@ sub ClientWritable { } else { # Partial string sent. $Watcher->data(substr($Data, $result)); if($result == 0) { # client hung up on us!! - Log("INFO", "lonc pipe client hung up on us!"); + # Log("INFO", "lonc pipe client hung up on us!"); $Watcher->cancel; $Socket->shutdown(2); $Socket->close(); @@ -600,8 +672,14 @@ Parameters: sub FailTransaction { my $transaction = shift; - Log("WARNING", "Failing transaction ".$transaction->getRequest()); - Debug(1, "Failing transaction: ".$transaction->getRequest()); + + # If the socket is dead, that's already logged. + + if ($ConnectionRetriesLeft > 0) { + Log("WARNING", "Failing transaction " + .$transaction->getLoggableRequest()); + } + Debug(1, "Failing transaction: ".$transaction->getLoggableRequest()); if (!$transaction->isDeferred()) { # If the transaction is deferred we'll get to it. my $client = $transaction->getClient(); Debug(1," Replying con_lost to ".$transaction->getRequest()); @@ -611,12 +689,14 @@ sub FailTransaction { } =pod + =head1 EmptyQueue Fails all items in the work queue with con_lost. Note that each item in the work queue is a transaction. =cut + sub EmptyQueue { $ConnectionRetriesLeft--; # Counts as connection failure too. while($WorkQueue->Count()) { @@ -632,6 +712,7 @@ sub EmptyQueue { Close all connections open on lond prior to exit e.g. =cut + sub CloseAllLondConnections { foreach my $Socket (keys %ActiveConnections) { if(exists($ActiveTransactions{$Socket})) { @@ -640,7 +721,6 @@ sub CloseAllLondConnections { KillSocket($Socket); } } -=cut =pod @@ -662,8 +742,8 @@ Parameters: nonzero if we are allowed to create a new connection. - =cut + sub KillSocket { my $Socket = shift; @@ -787,6 +867,11 @@ sub LondReadable { "Lond connection lost."); if(exists($ActiveTransactions{$Socket})) { FailTransaction($ActiveTransactions{$Socket}); + } else { + # Socket is connecting and failed... need to mark + # no longer connecting. + + $LondConnecting = 0; } $Watcher->cancel(); KillSocket($Socket); @@ -861,12 +946,16 @@ sub LondReadable { .$RemoteHost." now ready for action"); } ServerToIdle($Socket); # Next work unit or idle. + + # + $LondConnecting = 0; # Best spot I can think of for this. + # } elsif ($State eq "SendingRequest") { # We need to be writable for this and probably don't belong # here inthe first place. - Deubg(6, "SendingRequest state encountered in readable"); + Debug(6, "SendingRequest state encountered in readable"); $Watcher->poll("w"); $Watcher->cb(\&LondWritable); @@ -974,6 +1063,10 @@ sub LondWritable { " has been disconnected"); if(exists($ActiveTransactions{$Socket})) { FailTransaction($ActiveTransactions{$Socket}); + } else { + # In the process of conneting, so need to turn that off. + + $LondConnecting = 0; } $Watcher->cancel(); KillSocket($Socket); @@ -1063,6 +1156,7 @@ sub LondWritable { =pod =cut + sub QueueDelayed { Debug(3,"QueueDelayed called"); @@ -1121,7 +1215,7 @@ sub MakeLondConnection { # my $Socket = $Connection->GetSocket(); if($Socket eq undef) { - die "did not get a socket from the connection"; + &child_exit(-1, "did not get a socket from the connection"); } else { &Debug(9,"MakeLondConnection got socket: ".$Socket); } @@ -1134,7 +1228,9 @@ sub MakeLondConnection { data => $Connection, desc => 'Connection to lond server'); $ActiveConnections{$Connection} = $event; - + if ($ConnectionCount == 0) { + &SetupTimer; # Need to handle timeouts with connections... + } $ConnectionCount++; Debug(4, "Connection count = ".$ConnectionCount); if($ConnectionCount == 1) { # First Connection: @@ -1142,6 +1238,7 @@ sub MakeLondConnection { } Log("SUCESS", "Created connection ".$ConnectionCount ." to host ".GetServerHost()); + $LondConnecting = 1; # Connection in progress. return 1; # Return success. } @@ -1225,15 +1322,18 @@ sub QueueTransaction { if(!defined $LondSocket) { # Need to queue request. Debug(5,"Must queue..."); $WorkQueue->enqueue($requestData); - if($ConnectionCount < $MaxConnectionCount) { + Debug(5, "Queue Transaction startnew $ConnectionCount $LondConnecting"); + if(($ConnectionCount < $MaxConnectionCount) && (! $LondConnecting)) { + if($ConnectionRetriesLeft > 0) { Debug(5,"Starting additional lond connection"); - if(MakeLondConnection() == 0) { + if(&MakeLondConnection() == 0) { EmptyQueue(); # Fail transactions, can't make connection. CloseAllLondConnections; # Should all be closed but... } } else { ShowStatus(GetServerHost()." >>> DEAD !!!! <<<"); + $LondConnecting = 0; EmptyQueue(); # It's worse than that ... he's dead Jim. CloseAllLondConnections; # Should all be closed but.. } @@ -1297,6 +1397,40 @@ sub ClientRequest { } +# +# Accept a connection request for a client (lonc child) and +# start up an event watcher to keep an eye on input from that +# Event. This can be called both from NewClient and from +# ChildProcess if we are started in DieWhenIdle mode. +# Parameters: +# $socket - The listener socket. +# Returns: +# NONE +# Side Effects: +# An event is made to watch the accepted connection. +# Active clients hash is updated to reflect the new connection. +# The client connection count is incremented. +# +sub accept_client { + my ($socket) = @_; + + Debug(8, "Entering accept for lonc UNIX socket\n"); + my $connection = $socket->accept(); # Accept the client connection. + Debug(8,"Connection request accepted from " + .GetPeername($connection, AF_UNIX)); + + + my $description = sprintf("Connection to lonc client %d", + $ClientConnection); + Debug(9, "Creating event named: ".$description); + Event->io(cb => \&ClientRequest, + poll => 'r', + desc => $description, + data => "", + fd => $connection); + $ActiveClients{$connection} = $ClientConnection; + $ClientConnection++; +} =pod @@ -1315,21 +1449,8 @@ sub NewClient { my $event = shift; # Get the event parameters. my $watcher = $event->w; my $socket = $watcher->fd; # Get the event' socket. - my $connection = $socket->accept(); # Accept the client connection. - Debug(8,"Connection request accepted from " - .GetPeername($connection, AF_UNIX)); - - my $description = sprintf("Connection to lonc client %d", - $ClientConnection); - Debug(9, "Creating event named: ".$description); - Event->io(cb => \&ClientRequest, - poll => 'r', - desc => $description, - data => "", - fd => $connection); - $ActiveClients{$connection} = $ClientConnection; - $ClientConnection++; + &accept_client($socket); } =pod @@ -1339,10 +1460,20 @@ sub NewClient { Returns the name of the UNIX socket on which to listen for client connections. +=head2 Parameters: + + host (optional) - Name of the host socket to return.. defaults to + the return from GetServerHost(). + =cut sub GetLoncSocketPath { - return $UnixSocketDir."/".GetServerHost(); + + my $host = GetServerHost(); # Default host. + if (@_) { + ($host) = @_; # Override if supplied. + } + return $UnixSocketDir."/".$host; } =pod @@ -1379,22 +1510,32 @@ connection. The event handler establish (creating a communcations channel), that int turn will establish another event handler to subess requests. +=head2 Parameters: + + host (optional) Name of the host to set up a unix socket to. + =cut sub SetupLoncListener { + my $host = GetServerHost(); # Default host. + if (@_) { + ($host) = @_ # Override host with parameter. + } + my $socket; - my $SocketName = GetLoncSocketPath(); + my $SocketName = GetLoncSocketPath($host); unlink($SocketName); unless ($socket =IO::Socket::UNIX->new(Local => $SocketName, - Listen => 10, + Listen => 250, Type => SOCK_STREAM)) { - die "Failed to create a lonc listner socket"; + if($I_am_child) { + &child_exit(-1, "Failed to create a lonc listener socket"); + } else { + die "Failed to create a lonc listner socket"; + } } - Event->io(cb => \&NewClient, - poll => 'r', - desc => 'Lonc listener Unix Socket', - fd => $socket); + return $socket; } # @@ -1424,6 +1565,7 @@ into the status file. We also use this to reset the retries count in order to allow the client to retry connections with a previously dead server. + =cut sub ChildStatus { @@ -1432,26 +1574,31 @@ sub ChildStatus { Debug(2, "Reporting child status because : ".$watcher->data); my $docdir = $perlvar{'lonDocRoot'}; - my $fh = IO::File->new(">>$docdir/lon-status/loncstatus.txt"); - print $fh $$."\t".$RemoteHost."\t".$Status."\t". + + open(LOG,">>$docdir/lon-status/loncstatus.txt"); + flock(LOG,LOCK_EX); + print LOG $$."\t".$RemoteHost."\t".$Status."\t". $RecentLogEntry."\n"; # # Write out information about each of the connections: # if ($DebugLevel > 2) { - print $fh "Active connection statuses: \n"; + print LOG "Active connection statuses: \n"; my $i = 1; print STDERR "================================= Socket Status Dump:\n"; foreach my $item (keys %ActiveConnections) { my $Socket = $ActiveConnections{$item}->data; my $state = $Socket->GetState(); - print $fh "Connection $i State: $state\n"; + print LOG "Connection $i State: $state\n"; print STDERR "---------------------- Connection $i \n"; $Socket->Dump(-1); # Ensure it gets dumped.. $i++; } } + flock(LOG,LOCK_UN); + close(LOG); $ConnectionRetriesLeft = $ConnectionRetries; + UpdateStatus(); } =pod @@ -1472,12 +1619,14 @@ sub SignalledToDeath { chomp($signal); Log("CRITICAL", "Abnormal exit. Child $$ for $RemoteHost " ."died through "."\"$signal\""); - LogPerm("F:lonc: $$ on $RemoteHost signalled to death: " - ."\"$signal\""); + #LogPerm("F:lonc: $$ on $RemoteHost signalled to death: " +# ."\"$signal\""); exit 0; } +=pod + =head2 ToggleDebug This sub toggles trace debugging on and off. @@ -1493,18 +1642,54 @@ sub ToggleDebug { } +=pod + =head2 ChildProcess This sub implements a child process for a single lonc daemon. +Optional parameter: + $socket - if provided, this is a socket already open for listen + on the client socket. Otherwise, a new listen is set up. =cut sub ChildProcess { + # If we are in DieWhenIdle mode, we've inherited all the + # events of our parent and those have to be cancelled or else + # all holy bloody chaos will result.. trust me, I already made + # >that< mistake. + + my $host = GetServerHost(); + foreach my $listener (keys %parent_dispatchers) { + my $watcher = $parent_dispatchers{$listener}; + my $s = $watcher->fd; + if ($listener ne $host) { # Close everyone but me. + Debug(5, "Closing listen socket for $listener"); + $s->close(); + } + Debug(5, "Killing watcher for $listener"); + + $watcher->cancel(); + delete($parent_dispatchers{$listener}); + + } + + # kill off the parent's signal handlers too! + # + + for my $handler (keys %parent_handlers) { + my $watcher = $parent_handlers{$handler}; + $watcher->cancel(); + delete($parent_handlers{$handler}); + } + + $I_am_child = 1; # Seems like in spite of it all I may still getting + # parent event dispatches.. flag I'm a child. # # Signals must be handled by the Event framework... -# + # Event->signal(signal => "QUIT", cb => \&SignalledToDeath, @@ -1521,9 +1706,21 @@ sub ChildProcess { cb => \&ToggleDebug, data => "INT"); - SetupTimer(); - - SetupLoncListener(); + # Figure out if we got passed a socket or need to open one to listen for + # client requests. + + my ($socket) = @_; + if (!$socket) { + + $socket = SetupLoncListener(); + } + # Establish an event to listen for client connection requests. + + + Event->io(cb => \&NewClient, + poll => 'r', + desc => 'Lonc Listener Unix Socket', + fd => $socket); $Event::Debuglevel = $DebugLevel; @@ -1531,22 +1728,29 @@ sub ChildProcess { # Setup the initial server connection: - # &MakeLondConnection(); // let first work requirest do it. + # &MakeLondConnection(); // let first work request do it. + # If We are in diwhenidle, need to accept the connection since the + # event may not fire. + + if ($DieWhenIdle) { + &accept_client($socket); + } Debug(9,"Entering event loop"); my $ret = Event::loop(); # Start the main event loop. - die "Main event loop exited!!!"; + &child_exit (-1,"Main event loop exited!!!"); } # Create a new child for host passed in: sub CreateChild { + my ($host, $socket) = @_; + my $sigset = POSIX::SigSet->new(SIGINT); sigprocmask(SIG_BLOCK, $sigset); - my $host = shift; $RemoteHost = $host; Log("CRITICAL", "Forking server for ".$host); my $pid = fork; @@ -1560,10 +1764,157 @@ sub CreateChild { ShowStatus("Connected to ".$RemoteHost); $SIG{INT} = 'DEFAULT'; sigprocmask(SIG_UNBLOCK, $sigset); - ChildProcess; # Does not return. + if(defined $socket) { + &ChildProcess($socket); + } else { + ChildProcess; # Does not return. + } + } +} + +# parent_client_connection: +# Event handler that processes client connections for the parent process. +# This sub is called when the parent is listening on a socket and +# a connection request arrives. We must: +# Start a child process to accept the connection request. +# Kill our listen on the socket. +# Parameter: +# event - The event object that was created to monitor this socket. +# event->w->fd is the socket. +# Returns: +# NONE +# +sub parent_client_connection { + if ($I_am_child) { + # Should not get here, but seem to anyway: + &Debug(5," Child caught parent client connection event!!"); + my ($event) = @_; + my $watcher = $event->w; + $watcher->cancel(); # Try to kill it off again!! + } else { + &Debug(9, "parent_client_connection"); + my ($event) = @_; + my $watcher = $event->w; + my $socket = $watcher->fd; + + # Lookup the host associated with this socket: + + my $host = $listening_to{$socket}; + + # Start the child: + + + + &Debug(9,"Creating child for $host (parent_client_connection)"); + &CreateChild($host, $socket); + + # Clean up the listen since now the child takes over until it exits. + + $watcher->cancel(); # Nolonger listening to this event + delete($listening_to{$socket}); + delete($parent_dispatchers{$host}); + $socket->close(); + } +} + +# parent_listen: +# Opens a socket and starts a listen for the parent process on a client UNIX +# domain socket. +# +# This involves: +# Creating a socket for listen. +# Removing any socket lock file +# Adding an event handler for this socket becoming readable +# To the parent's event dispatcher. +# Parameters: +# loncapa_host - LonCAPA cluster name of the host represented by the client +# socket. +# Returns: +# NONE +# +sub parent_listen { + my ($loncapa_host) = @_; + Debug(5, "parent_listen: $loncapa_host"); + + my $socket = &SetupLoncListener($loncapa_host); + $listening_to{$socket} = $loncapa_host; + if (!$socket) { + die "Unable to create a listen socket for $loncapa_host"; + } + + my $lock_file = &GetLoncSocketPath($loncapa_host).".lock"; + unlink($lock_file); # No problem if it doesn't exist yet [startup e.g.] + + my $watcher = Event->io(cb => \&parent_client_connection, + poll => 'r', + desc => "Parent listener unix socket ($loncapa_host)", + fd => $socket); + $parent_dispatchers{$loncapa_host} = $watcher; + +} + + +# listen_on_all_unix_sockets: +# This sub initiates a listen on all unix domain lonc client sockets. +# This will be called in the case where we are trimming idle processes. +# When idle processes are trimmed, loncnew starts up with no children, +# and only spawns off children when a connection request occurs on the +# client unix socket. The spawned child continues to run until it has +# been idle a while at which point it eventually exits and once more +# the parent picks up the listen. +# +# Parameters: +# NONE +# Implicit Inputs: +# The configuration file that has been read in by LondConnection. +# Returns: +# NONE +# +sub listen_on_all_unix_sockets { + Debug(5, "listen_on_all_unix_sockets"); + my $host_iterator = &LondConnection::GetHostIterator(); + while (!$host_iterator->end()) { + my $host_entry_ref = $host_iterator->get(); + my $host_name = $host_entry_ref->[0]; + Debug(9, "Listen for $host_name"); + &parent_listen($host_name); + $host_iterator->next(); + } +} + +# server_died is called whenever a child process exits. +# Since this is dispatched via a signal, we must process all +# dead children until there are no more left. The action +# is to: +# - Remove the child from the bookeeping hashes +# - Re-establish a listen on the unix domain socket associated +# with that host. +# Parameters: +# The event, but we don't actually care about it. +sub server_died { + &Debug(9, "server_died called..."); + + while(1) { # Loop until waitpid nowait fails. + my $pid = waitpid(-1, WNOHANG); + if($pid <= 0) { + return; # Nothing left to wait for. + } + # need the host to restart: + + my $host = $ChildHash{$pid}; + if($host) { # It's for real... + &Debug(9, "Caught sigchild for $host"); + delete($ChildHash{$pid}); + delete($HostToPid{$host}); + &parent_listen($host); + + } else { + &Debug(5, "Caught sigchild for pid not in hosts hash: $pid"); + } } } + # # Parent process logic pass 1: # For each entry in the hosts table, we will @@ -1613,44 +1964,91 @@ Log("CRITICAL", "--------------- Startin LondConnection::ReadConfig; # Read standard config files. my $HostIterator = LondConnection::GetHostIterator; -while (! $HostIterator->end()) { - my $hostentryref = $HostIterator->get(); - CreateChild($hostentryref->[0]); - $HostHash{$hostentryref->[0]} = $hostentryref->[4]; - $HostIterator->next(); +if ($DieWhenIdle) { + $RemoteHost = "[parent]"; + &listen_on_all_unix_sockets(); +} else { + + while (! $HostIterator->end()) { + + my $hostentryref = $HostIterator->get(); + CreateChild($hostentryref->[0]); + $HostHash{$hostentryref->[0]} = $hostentryref->[4]; + $HostIterator->next(); + } } + $RemoteHost = "Parent Server"; # Maintain the population: ShowStatus("Parent keeping the flock"); -# -# Set up parent signals: -# -$SIG{INT} = \&Terminate; -$SIG{TERM} = \&Terminate; -$SIG{HUP} = \&Restart; -$SIG{USR1} = \&CheckKids; -$SIG{USR2} = \&UpdateKids; # LonManage update request. - -while(1) { - my $deadchild = wait(); - if(exists $ChildHash{$deadchild}) { # need to restart. - my $deadhost = $ChildHash{$deadchild}; - delete($HostToPid{$deadhost}); - delete($ChildHash{$deadchild}); - Log("WARNING","Lost child pid= ".$deadchild. - "Connected to host ".$deadhost); - Log("INFO", "Restarting child procesing ".$deadhost); - CreateChild($deadhost); +if ($DieWhenIdle) { + # We need to setup a SIGChild event to handle the exit (natural or otherwise) + # of the children. + + Event->signal(cb => \&server_died, + desc => "Child exit handler", + signal => "CHLD"); + + + # Set up all the other signals we set up. We'll vector them off to the + # same subs as we would for DieWhenIdle false and, if necessary, conditionalize + # the code there. + + $parent_handlers{INT} = Event->signal(cb => \&Terminate, + desc => "Parent INT handler", + signal => "INT"); + $parent_handlers{TERM} = Event->signal(cb => \&Terminate, + desc => "Parent TERM handler", + signal => "TERM"); + $parent_handlers{HUP} = Event->signal(cb => \&Restart, + desc => "Parent HUP handler.", + signal => "HUP"); + $parent_handlers{USR1} = Event->signal(cb => \&CheckKids, + desc => "Parent USR1 handler", + signal => "USR1"); + $parent_handlers{USR2} = Event->signal(cb => \&UpdateKids, + desc => "Parent USR2 handler.", + signal => "USR2"); + + # Start procdesing events. + + $Event::DebugLevel = $DebugLevel; + Debug(9, "Parent entering event loop"); + my $ret = Event::loop(); + die "Main Event loop exited: $ret"; + + +} else { + # + # Set up parent signals: + # + + $SIG{INT} = \&Terminate; + $SIG{TERM} = \&Terminate; + $SIG{HUP} = \&Restart; + $SIG{USR1} = \&CheckKids; + $SIG{USR2} = \&UpdateKids; # LonManage update request. + + while(1) { + my $deadchild = wait(); + if(exists $ChildHash{$deadchild}) { # need to restart. + my $deadhost = $ChildHash{$deadchild}; + delete($HostToPid{$deadhost}); + delete($ChildHash{$deadchild}); + Log("WARNING","Lost child pid= ".$deadchild. + "Connected to host ".$deadhost); + Log("INFO", "Restarting child procesing ".$deadhost); + CreateChild($deadhost); + } } } - =pod =head1 CheckKids @@ -1670,11 +2068,14 @@ sub CheckKids { my $now=time; my $local=localtime($now); print $fh "LONC status $local - parent $$ \n\n"; + foreach my $host (keys %parent_dispatchers) { + print $fh "LONC Parent process listening for $host\n"; + } foreach my $pid (keys %ChildHash) { Debug(2, "Sending USR1 -> $pid"); kill 'USR1' => $pid; # Tell Child to report status. - sleep 1; # Wait so file doesn't intermix. } + } =pod @@ -1707,81 +2108,15 @@ sub UpdateKids { Log("INFO", "Updating connections via SIGUSR2"); - # Just in case we need to kill our own lonc, we wait a few seconds to - # give it a chance to receive and relay lond's response to the - # re-init command. - # - - sleep(2); # Wait a couple of seconds. - - my %hosts; # Indexed by loncapa hostname, value=ip. - - # Need to re-read the host table: - - - LondConnection::ReadConfig(); - my $I = LondConnection::GetHostIterator; - while (! $I->end()) { - my $item = $I->get(); - $hosts{$item->[0]} = $item->[4]; - $I->next(); - } - - # The logic below is written for clarity not for efficiency. - # Since I anticipate that this function is only rarely called, that's - # appropriate. There are certainly ways to combine the loops below, - # and anyone wishing to obscure the logic is welcome to go for it. - # Note that we don't re-direct sigchild. Instead we do what's needed - # to the data structures that keep track of children to ensure that - # when sigchild is honored, no new child is born. - # - - # For each existing child; if it's host doesn't exist, kill the child. - - foreach my $child (keys %ChildHash) { - my $oldhost = $ChildHash{$child}; - if (!(exists $hosts{$oldhost})) { - Log("CRITICAL", "Killing child for $oldhost host no longer exists"); - delete $ChildHash{$child}; - delete $HostToPid{$oldhost}; - kill 'QUIT' => $child; - } - } - # For each remaining existing child; if it's host's ip has changed, - # Restart the child on the new IP. - - foreach my $child (keys %ChildHash) { - my $oldhost = $ChildHash{$child}; - my $oldip = $HostHash{$oldhost}; - if ($hosts{$oldhost} ne $oldip) { - - # kill the old child. - - Log("CRITICAL", "Killing child for $oldhost host ip has changed..."); - delete $ChildHash{$child}; - delete $HostToPid{$oldhost}; - kill 'QUIT' => $child; + # I'm not sure what I was thinking in the first implementation. + # someone will have to work hard to convince me the effect is any + # different than Restart, especially now that we don't start up + # per host servers automatically, may as well just restart. + # The down side is transactions that are in flight will get timed out + # (lost unless they are critical). - # Do the book-keeping needed to start a new child on the - # new ip. - - $HostHash{$oldhost} = $hosts{$oldhost}; - CreateChild($oldhost); - } - } - # Finally, for each new host, not in the host hash, create a - # enter the host and create a new child. - # Force a status display of any existing process. + &Restart(); - foreach my $host (keys %hosts) { - if(!(exists $HostHash{$host})) { - Log("INFO", "New host $host discovered in hosts.tab..."); - $HostHash{$host} = $hosts{$host}; - CreateChild($host); - } else { - kill 'HUP' => $HostToPid{$host}; # status display. - } - } } @@ -1800,7 +2135,7 @@ sub Restart { Log("CRITICAL", "Restarting"); my $execdir = $perlvar{'lonDaemons'}; unlink("$execdir/logs/lonc.pid"); - exec("$execdir/loncnew"); + exec("$executable"); } =pod @@ -1817,15 +2152,32 @@ sub KillThemAll { local($SIG{CHLD}) = 'IGNORE'; # Our children >will< die. foreach my $pid (keys %ChildHash) { my $serving = $ChildHash{$pid}; - Debug(2, "Killing lonc for $serving pid = $pid"); - ShowStatus("Killing lonc for $serving pid = $pid"); - Log("CRITICAL", "Killing lonc for $serving pid = $pid"); + ShowStatus("Nicely Killing lonc for $serving pid = $pid"); + Log("CRITICAL", "Nicely Killing lonc for $serving pid = $pid"); kill 'QUIT' => $pid; - delete($ChildHash{$pid}); } - my $execdir = $perlvar{'lonDaemons'}; - unlink("$execdir/logs/lonc.pid"); + +} + + +# +# Kill all children via KILL. Just in case the +# first shot didn't get them. + +sub really_kill_them_all_dammit +{ + Debug(2, "Kill them all Dammit"); + local($SIG{CHLD} = 'IGNORE'); # In case some purist reenabled them. + foreach my $pid (keys %ChildHash) { + my $serving = $ChildHash{$pid}; + &ShowStatus("Nastily killing lonc for $serving pid = $pid"); + Log("CRITICAL", "Nastily killing lonc for $serving pid = $pid"); + kill 'KILL' => $pid; + delete($ChildHash{$pid}); + my $execdir = $perlvar{'lonDaemons'}; + unlink("$execdir/logs/lonc.pid"); + } } =pod @@ -1837,7 +2189,15 @@ Terminate the system. =cut sub Terminate { - KillThemAll; + &Log("CRITICAL", "Asked to kill children.. first be nice..."); + &KillThemAll; + # + # By now they really should all be dead.. but just in case + # send them all SIGKILL's after a bit of waiting: + + sleep(4); + &Log("CRITICAL", "Now kill children nasty"); + &really_kill_them_all_dammit; Log("CRITICAL","Master process exiting"); exit 0; 500 Internal Server Error

Internal Server Error

The server encountered an internal error or misconfiguration and was unable to complete your request.

Please contact the server administrator at root@localhost to inform them of the time this error occurred, and the actions you performed just before this error.

More information about this error may be available in the server error log.