Diff for /loncom/loncnew between versions 1.14 and 1.20

version 1.14, 2003/07/03 02:10:18 version 1.20, 2003/08/25 18:48:11
Line 7 Line 7
 # Copyright Michigan State University Board of Trustees  # Copyright Michigan State University Board of Trustees
 #  #
 # This file is part of the LearningOnline Network with CAPA (LON-CAPA).  # This file is part of the LearningOnline Network with CAPA (LON-CAPA).
 #  ## LON-CAPA is free software; you can redistribute it and/or modify
 # LON-CAPA is free software; you can redistribute it and/or modify  
 # it under the terms of the GNU General Public License as published by  # it under the terms of the GNU General Public License as published by
 # the Free Software Foundation; either version 2 of the License, or  # the Free Software Foundation; either version 2 of the License, or
 # (at your option) any later version.  # (at your option) any later version.
Line 27 Line 26
 # http://www.lon-capa.org/  # http://www.lon-capa.org/
 #  #
 #  #
 # new lonc handles n requestors spread out bver m connections to londs.  # new lonc handles n request out bver m connections to londs.
 # This module is based on the Event class.  # This module is based on the Event class.
 #   Development iterations:  #   Development iterations:
 #    - Setup basic event loop.   (done)  #    - Setup basic event loop.   (done)
Line 46 Line 45
   
 # Change log:  # Change log:
 #    $Log$  #    $Log$
   #    Revision 1.20  2003/08/25 18:48:11  albertel
   #    - fixing a forgotten ;
   #
   #    Revision 1.19  2003/08/19 09:31:46  foxr
   #    Get socket directory from configuration rather than the old hard coded test
   #    way that I forgot to un-hard code.
   #
   #    Revision 1.18  2003/08/06 09:52:29  foxr
   #    Also needed to remember to fail in-flight transactions if their sends fail.
   #
   #    Revision 1.17  2003/08/03 00:44:31  foxr
   #    1. Correct handling of connection failure: Assume it means the host is
   #       unreachable and fail all of the queued transactions.  Note that the
   #       inflight transactions should fail on their own time due either to timeout
   #       or send/receive failures.
   #    2. Correct handling of logs for forced death signals.  Pull the signal
   #       from the event watcher.
   #
   #    Revision 1.16  2003/07/29 02:33:05  foxr
   #    Add SIGINT processing to child processes to toggle annoying trace mode
   #    on/off.. will try to use this to isolate the compute boud process issue.
   #
   #    Revision 1.15  2003/07/15 02:07:05  foxr
   #    Added code for lonc/lond transaction timeouts.  Who knows if it works right.
   #    The intent is for a timeout to fail any transaction in progress and kill
   #    off the sockt that timed out.
   #
 #    Revision 1.14  2003/07/03 02:10:18  foxr  #    Revision 1.14  2003/07/03 02:10:18  foxr
 #    Get all of the signals to work correctly.  #    Get all of the signals to work correctly.
 #  #
Line 120  my $MaxConnectionCount = 10; # Will get Line 146  my $MaxConnectionCount = 10; # Will get
 my $ClientConnection = 0; # Uniquifier for client events.  my $ClientConnection = 0; # Uniquifier for client events.
   
 my $DebugLevel = 0;  my $DebugLevel = 0;
   my $NextDebugLevel= 10; # So Sigint can toggle this.
 my $IdleTimeout= 3600; # Wait an hour before pruning connections.  my $IdleTimeout= 3600; # Wait an hour before pruning connections.
   
 #  #
 #  The variables below are only used by the child processes.  #  The variables below are only used by the child processes.
 #  #
 my $RemoteHost; # Name of host child is talking to.  my $RemoteHost; # Name of host child is talking to.
 my $UnixSocketDir= "/home/httpd/sockets";   my $UnixSocketDir= $perlvar{'lonSockDir'};
 my $IdleConnections = Stack->new(); # Set of idle connections  my $IdleConnections = Stack->new(); # Set of idle connections
 my %ActiveConnections; # Connections to the remote lond.  my %ActiveConnections; # Connections to the remote lond.
 my %ActiveTransactions; # LondTransactions in flight.  my %ActiveTransactions; # LondTransactions in flight.
Line 256  sub Debug { Line 283  sub Debug {
     my $level   = shift;      my $level   = shift;
     my $message = shift;      my $message = shift;
     if ($level <= $DebugLevel) {      if ($level <= $DebugLevel) {
  print $message." host = ".$RemoteHost."\n";   Log("INFO", "-Debug- $message host = $RemotHost");
     }      }
 }  }
   
Line 286  sub ShowStatus { Line 313  sub ShowStatus {
   
 =pod  =pod
   
   =head 2 SocketTimeout
   
       Called when an action on the socket times out.  The socket is 
      destroyed and any active transaction is failed.
   
   
   =cut
   sub SocketTimeout {
       my $Socket = shift;
       
       KillSocket($Socket);
   }
   
   =pod
   
 =head2 Tick  =head2 Tick
   
 Invoked  each timer tick.  Invoked  each timer tick.
Line 310  sub Tick { Line 352  sub Tick {
     } else {      } else {
  $IdleSeconds = 0; # Reset idle count if not idle.   $IdleSeconds = 0; # Reset idle count if not idle.
     }      }
       #
       #  For each inflight transaction, tick down its timeout counter.
       #
       foreach $item (keys %ActiveTransactions) {
    my $Socket = $ActiveTransactions{$item}->getServer();
    $Socket->Tick();
       }
     # Do we have work in the queue, but no connections to service them?      # Do we have work in the queue, but no connections to service them?
     # If so, try to make some new connections to get things going again.      # If so, try to make some new connections to get things going again.
     #      #
Line 448  sub ClientWritable { Line 496  sub ClientWritable {
   
     } else { # Partial string sent.      } else { # Partial string sent.
  $Watcher->data(substr($Data, $result));   $Watcher->data(substr($Data, $result));
    if($result == 0) {    # client hung up on us!!
       Log("INFO", "lonc pipe client hung up on us!");
       $Watcher->cancel;
       $Socket->shutdown(2);
       $Socket->close();
    }
     }      }
           
  } else { # Error of some sort...   } else { # Error of some sort...
Line 565  Parameters: Line 619  Parameters:
   
 sub FailTransaction {  sub FailTransaction {
     my $transaction = shift;      my $transaction = shift;
       Log("WARNING", "Failing transaction ".$transaction->getRequest());
     Debug(1, "Failing transaction: ".$transaction->getRequest());      Debug(1, "Failing transaction: ".$transaction->getRequest());
     if (!$transaction->isDeferred()) { # If the transaction is deferred we'll get to it.      if (!$transaction->isDeferred()) { # If the transaction is deferred we'll get to it.
  my $client  = $transaction->getClient();   my $client  = $transaction->getClient();
Line 627  nonzero if we are allowed to create a ne Line 682  nonzero if we are allowed to create a ne
 sub KillSocket {  sub KillSocket {
     my $Socket = shift;      my $Socket = shift;
   
       Log("WARNING", "Shutting down a socket");
     $Socket->Shutdown();      $Socket->Shutdown();
   
     #  If the socket came from the active connection set,      #  If the socket came from the active connection set,
Line 723  sub LondReadable { Line 779  sub LondReadable {
   
     SocketDump(6, $Socket);      SocketDump(6, $Socket);
     my $status = $Socket->Readable();      my $status = $Socket->Readable();
   
     &Debug(2, "Socket->Readable returned: $status");      &Debug(2, "Socket->Readable returned: $status");
   
     if($status != 0) {      if($status != 0) {
  # bad return from socket read. Currently this means that   # bad return from socket read. Currently this means that
  # The socket has become disconnected. We fail the transaction.   # The socket has become disconnected. We fail the transaction.
   
    Log("WARNING",
       "Lond connection lost.");
  if(exists($ActiveTransactions{$Socket})) {   if(exists($ActiveTransactions{$Socket})) {
     Debug(3,"Lond connection lost failing transaction");  
     FailTransaction($ActiveTransactions{$Socket});      FailTransaction($ActiveTransactions{$Socket});
  }   }
  $Watcher->cancel();   $Watcher->cancel();
Line 880  sub LondWritable { Line 938  sub LondWritable {
     # We'll treat this as if the socket got disconnected:      # We'll treat this as if the socket got disconnected:
     Log("WARNING", "Connection to ".$RemoteHost.      Log("WARNING", "Connection to ".$RemoteHost.
  " has been disconnected");   " has been disconnected");
       FailTransaction($ActiveTransactions{$Socket});
     $Watcher->cancel();      $Watcher->cancel();
     KillSocket($Socket);      KillSocket($Socket);
     return;      return;
Line 1135  sub QueueTransaction { Line 1194  sub QueueTransaction {
  $WorkQueue->enqueue($requestData);   $WorkQueue->enqueue($requestData);
  if($ConnectionCount < $MaxConnectionCount) {   if($ConnectionCount < $MaxConnectionCount) {
     Debug(4,"Starting additional lond connection");      Debug(4,"Starting additional lond connection");
     MakeLondConnection();      if(MakeLondConnection() == 0) {
    EmptyQueue(); # Fail transactions, can't make connection.
       }
  }   }
     } else { # Can start the request:      } else { # Can start the request:
  Debug(8,"Can start...");   Debug(8,"Can start...");
Line 1326  sub SignalledToDeath { Line 1387  sub SignalledToDeath {
     my $watcher= $event->w;      my $watcher= $event->w;
   
     Debug(2,"Signalled to death! via ".$watcher->data);      Debug(2,"Signalled to death! via ".$watcher->data);
     my ($signal) = @_;      my ($signal) = $watcher->data;
     chomp($signal);      chomp($signal);
     Log("CRITICAL", "Abnormal exit.  Child $$ for $RemoteHost "      Log("CRITICAL", "Abnormal exit.  Child $$ for $RemoteHost "
  ."died through "."\"$signal\"");   ."died through "."\"$signal\"");
     LogPerm("F:lonc: $$ on $RemoteHost signalled to death: "      LogPerm("F:lonc: $$ on $RemoteHost signalled to death: "
     ."\"$signal\"");      ."\"$signal\"");
     die("Signal abnormal end");  
     exit 0;      exit 0;
   
 }  }
   
   =head2 ToggleDebug
   
   This sub toggles trace debugging on and off.
   
   =cut
   
   sub ToggleDebug {
       my $Current    = $DebugLevel;
          $DebugLevel = $NextDebugLevel;
          $NextDebugLevel = $Current;
   
       Log("SUCCESS", "New debugging level for $RemoteHost now $DebugLevel");
   
   }
   
 =head2 ChildProcess  =head2 ChildProcess
   
 This sub implements a child process for a single lonc daemon.  This sub implements a child process for a single lonc daemon.
Line 1348  sub ChildProcess { Line 1424  sub ChildProcess {
     #      #
     #  Signals must be handled by the Event framework...      #  Signals must be handled by the Event framework...
 #  #
 #    $SIG{QUIT}  = \&SignalledToDeath;  
 #    $SIG{HUP}   = \&ChildStatus;  
 #    $SIG{USR1}  = IGNORE;  
 #    $SIG{INT}   = DEFAULT;  
 #    $SIG{CHLD}  = IGNORE;  
 #    $SIG{__DIE__}  = \&SignalledToDeath;  
   
     Event->signal(signal   => "QUIT",      Event->signal(signal   => "QUIT",
   cb       => \&SignalledToDeath,    cb       => \&SignalledToDeath,
Line 1364  sub ChildProcess { Line 1434  sub ChildProcess {
     Event->signal(signal   => "USR1",      Event->signal(signal   => "USR1",
   cb       => \&ChildStatus,    cb       => \&ChildStatus,
   data     => "USR1");    data     => "USR1");
       Event->signal(signal   => "INT",
     cb       => \&ToggleDebug,
     data     => "INT");
   
     SetupTimer();      SetupTimer();
           
Line 1395  sub CreateChild { Line 1468  sub CreateChild {
     Log("CRITICAL", "Forking server for ".$host);      Log("CRITICAL", "Forking server for ".$host);
     $pid          = fork;      $pid          = fork;
     if($pid) { # Parent      if($pid) { # Parent
    $RemoteHost = "Parent";
  $ChildHash{$pid} = $RemoteHost;   $ChildHash{$pid} = $RemoteHost;
  sigprocmask(SIG_UNBLOCK, $sigset);   sigprocmask(SIG_UNBLOCK, $sigset);
   
Line 1442  open (PIDSAVE, ">$execdir/logs/lonc.pid" Line 1516  open (PIDSAVE, ">$execdir/logs/lonc.pid"
 print PIDSAVE "$$\n";  print PIDSAVE "$$\n";
 close(PIDSAVE);  close(PIDSAVE);
   
   
   
 if (POSIX::setsid() < 0) {  if (POSIX::setsid() < 0) {
     print "Could not create new session\n";      print "Could not create new session\n";
     exit -1;      exit -1;
Line 1536  sub Restart { Line 1612  sub Restart {
 =head1 KillThemAll  =head1 KillThemAll
   
 Signal handler that kills all children by sending them a   Signal handler that kills all children by sending them a 
 SIGINT.  Responds to sigint and sigterm.  SIGHUP.  Responds to sigint and sigterm.
   
 =cut  =cut
   
Line 1548  sub KillThemAll { Line 1624  sub KillThemAll {
  Debug(2, "Killing lonc for $serving pid = $pid");   Debug(2, "Killing lonc for $serving pid = $pid");
  ShowStatus("Killing lonc for $serving pid = $pid");   ShowStatus("Killing lonc for $serving pid = $pid");
  Log("CRITICAL", "Killing lonc for $serving pid = $pid");   Log("CRITICAL", "Killing lonc for $serving pid = $pid");
  kill('INT', $pid);   kill 'QUIT' => $pid;
  delete($ChildeHash{$pid});   delete($ChildHash{$pid});
     }      }
     my $execdir = $perlvar{'lonDaemons'};      my $execdir = $perlvar{'lonDaemons'};
     unlink("$execdir/logs/lonc.pid");      unlink("$execdir/logs/lonc.pid");
     ShowStatus("Killing the master process");  
     Log("CRITICAL", "Killing the master process.");  
 }  }
   
 =pod  =pod
Line 1567  Terminate the system. Line 1642  Terminate the system.
   
 sub Terminate {  sub Terminate {
     KillThemAll;      KillThemAll;
     exit;      Log("CRITICAL","Master process exiting");
       exit 0;
   
 }  }
 =pod  =pod

Removed from v.1.14  
changed lines
  Added in v.1.20


FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>