loncom/loncnew - diff

Return to loncnew CVS log

Up to [LON-CAPA] / loncom

Diff for /loncom/loncnew between versions 1.21 and 1.24

version 1.21, 2003/08/26 09:19:51	version 1.24, 2003/09/16 09:46:42
Line 45	Line 45

# Change log:	# Change log:
# $Log$	# $Log$
	# Revision 1.24 2003/09/16 09:46:42 foxr
	# Added skeletal infrastructure to support SIGUSR2 update hosts request.
	#
	# Revision 1.23 2003/09/15 09:24:49 foxr
	# Add use strict and fix all the fallout from that.
	#
	# Revision 1.22 2003/09/02 10:34:47 foxr
	# - Fix errors in host dead detection logic (too many cases where the
	# retries left were not getting incremented or just not checked).
	# - Added some additional status to the ps axuww display:
	# o Remaining retries on a host.
	# o >>> DEAD <<< indicator if I've given up on a host.
	# - Tested the SIGHUP will reset the retries remaining count (thanks to
	# the above status stuff, and get allow the loncnew to re-try again
	# on the host (thanks to the log).
	#
# Revision 1.21 2003/08/26 09:19:51 foxr	# Revision 1.21 2003/08/26 09:19:51 foxr
# How embarrassing... put in the SocketTimeout function in loncnew and forgot	# How embarrassing... put in the SocketTimeout function in loncnew and forgot
# to actually hook it into the LondTransaction. Added this to MakeLondConnection	# to actually hook it into the LondTransaction. Added this to MakeLondConnection
Line 90	Line 106
# Revision 1.10 2003/06/24 02:46:04 foxr	# Revision 1.10 2003/06/24 02:46:04 foxr
# Put a limit on the number of times we'll retry a connection.	# Put a limit on the number of times we'll retry a connection.
# Start getting the signal stuff put in as well...note that need to get signals	# Start getting the signal stuff put in as well...note that need to get signals
# going or else 6the client will permanently give up on dead servers.	# going or else the client will permanently give up on dead servers.
#	#
# Revision 1.9 2003/06/13 02:38:43 foxr	# Revision 1.9 2003/06/13 02:38:43 foxr
# Add logging in 'expected format'	# Add logging in 'expected format'
Line 104	Line 120
# complete coding to support deferred transactions.	# complete coding to support deferred transactions.
#	#
#	#
	use strict;
use lib "/home/httpd/lib/perl/";	use lib "/home/httpd/lib/perl/";
use lib "/home/foxr/newloncapa/types";	use lib "/home/foxr/newloncapa/types";
use Event qw(:DEFAULT );	use Event qw(:DEFAULT );
Line 268 sub GetPeername {	Line 284 sub GetPeername {
my $peerip;	my $peerip;
if($AdrFamily == AF_INET) {	if($AdrFamily == AF_INET) {
($peerport, $peerip) = sockaddr_in($peer);	($peerport, $peerip) = sockaddr_in($peer);
my $peername = gethostbyaddr($iaddr, $AdrFamily);	my $peername = gethostbyaddr($peerip, $AdrFamily);
return $peername;	return $peername;
} elsif ($AdrFamily == AF_UNIX) {	} elsif ($AdrFamily == AF_UNIX) {
my $peerfile;	my $peerfile;
Line 289 sub Debug {	Line 305 sub Debug {
my $level = shift;	my $level = shift;
my $message = shift;	my $message = shift;
if ($level <= $DebugLevel) {	if ($level <= $DebugLevel) {
Log("INFO", "-Debug- $message host = $RemotHost");	Log("INFO", "-Debug- $message host = $RemoteHost");
}	}
}	}

Line 329 sub ShowStatus {	Line 345 sub ShowStatus {
sub SocketTimeout {	sub SocketTimeout {
my $Socket = shift;	my $Socket = shift;

KillSocket($Socket);	KillSocket($Socket); # A transaction timeout also counts as
	# a connection failure:
	$ConnectionRetriesLeft--;
}	}

=pod	=pod
Line 343 Invoked each timer tick.	Line 361 Invoked each timer tick.

sub Tick {	sub Tick {
my $client;	my $client;
ShowStatus(GetServerHost()." Connection count: ".$ConnectionCount);	if($ConnectionRetriesLeft > 0) {
	ShowStatus(GetServerHost()." Connection count: ".$ConnectionCount
	." Retries remaining: ".$ConnectionRetriesLeft);
	} else {
	ShowStatus(GetServerHost()." >> DEAD <<");
	}
# Is it time to prune connection count:	# Is it time to prune connection count:


Line 352 sub Tick {	Line 374 sub Tick {
($WorkQueue->Count() == 0)) { # Idle connections and nothing to do?	($WorkQueue->Count() == 0)) { # Idle connections and nothing to do?
$IdleSeconds++;	$IdleSeconds++;
if($IdleSeconds > $IdleTimeout) { # Prune a connection...	if($IdleSeconds > $IdleTimeout) { # Prune a connection...
$Socket = $IdleConnections->pop();	my $Socket = $IdleConnections->pop();
KillSocket($Socket);	KillSocket($Socket);
}	}
} else {	} else {
Line 361 sub Tick {	Line 383 sub Tick {
#	#
# For each inflight transaction, tick down its timeout counter.	# For each inflight transaction, tick down its timeout counter.
#	#
foreach $item (keys %ActiveTransactions) {	foreach my $item (keys %ActiveTransactions) {
my $Socket = $ActiveTransactions{$item}->getServer();	my $Socket = $ActiveTransactions{$item}->getServer();
$Socket->Tick();	$Socket->Tick();
}	}
Line 375 sub Tick {	Line 397 sub Tick {
my $Connections = ($Requests <= $MaxConnectionCount) ?	my $Connections = ($Requests <= $MaxConnectionCount) ?
$Requests : $MaxConnectionCount;	$Requests : $MaxConnectionCount;
Debug(1,"Work but no connections, start ".$Connections." of them");	Debug(1,"Work but no connections, start ".$Connections." of them");
for ($i =0; $i < $Connections; $i++) {	my $successCount = 0;
MakeLondConnection();	for (my $i =0; $i < $Connections; $i++) {
	$successCount += MakeLondConnection();
	}
	if($successCount == 0) { # All connections failed:
	Debug(1,"Work in queue failed to make any connectiouns\n");
	EmptyQueue(); # Fail pending transactions with con_lost.
}	}
} else {	} else {
	ShowStatus(GetServerHost()." >>> DEAD!!! <<<");
Debug(1,"Work in queue, but gave up on connections..flushing\n");	Debug(1,"Work in queue, but gave up on connections..flushing\n");
EmptyQueue(); # Connections can't be established.	EmptyQueue(); # Connections can't be established.
}	}
Line 430 sub ServerToIdle {	Line 458 sub ServerToIdle {

# If there's work to do, start the transaction:	# If there's work to do, start the transaction:

$reqdata = $WorkQueue->dequeue(); # This is a LondTransaction	my $reqdata = $WorkQueue->dequeue(); # This is a LondTransaction
unless($reqdata eq undef) {	unless($reqdata eq undef) {
Debug(9, "Queue gave request data: ".$reqdata->getRequest());	Debug(9, "Queue gave request data: ".$reqdata->getRequest());
&StartRequest($Socket, $reqdata);	&StartRequest($Socket, $reqdata);
Line 564 sub CompleteTransaction {	Line 592 sub CompleteTransaction {
StartClientReply($Transaction, $data);	StartClientReply($Transaction, $data);
} else { # Delete deferred transaction file.	} else { # Delete deferred transaction file.
Log("SUCCESS", "A delayed transaction was completed");	Log("SUCCESS", "A delayed transaction was completed");
LogPerm("S:$Client:".$Transaction->getRequest());	LogPerm("S:$Transaction->getClient() :".$Transaction->getRequest());
unlink $Transaction->getFile();	unlink $Transaction->getFile();
}	}
}	}
Line 632 sub FailTransaction {	Line 660 sub FailTransaction {
Debug(1," Replying con_lost to ".$transaction->getRequest());	Debug(1," Replying con_lost to ".$transaction->getRequest());
StartClientReply($transaction, "con_lost\n");	StartClientReply($transaction, "con_lost\n");
}	}
	if($ConnectionRetriesLeft <= 0) {
	Log("CRITICAL", "Host marked dead: ".GetServerHost());
	}

}	}

Line 643 sub FailTransaction {	Line 674 sub FailTransaction {

=cut	=cut
sub EmptyQueue {	sub EmptyQueue {
	$ConnectionRetriesLeft--; # Counts as connection failure too.
while($WorkQueue->Count()) {	while($WorkQueue->Count()) {
my $request = $WorkQueue->dequeue(); # This is a transaction	my $request = $WorkQueue->dequeue(); # This is a transaction
FailTransaction($request);	FailTransaction($request);
Line 657 Close all connections open on lond prior	Line 689 Close all connections open on lond prior

=cut	=cut
sub CloseAllLondConnections {	sub CloseAllLondConnections {
foreach $Socket (keys %ActiveConnections) {	foreach my $Socket (keys %ActiveConnections) {
KillSocket($Socket);	KillSocket($Socket);
}	}
}	}
Line 709 sub KillSocket {	Line 741 sub KillSocket {
# work queue, the work all gets failed with con_lost.	# work queue, the work all gets failed with con_lost.
#	#
if($ConnectionCount == 0) {	if($ConnectionCount == 0) {
EmptyQueue;	EmptyQueue();
}	}
}	}

Line 778 sub LondReadable {	Line 810 sub LondReadable {
my $Socket = $Watcher->data;	my $Socket = $Watcher->data;
my $client = undef;	my $client = undef;

&Debug(6,"LondReadable called state = ".$State);	&Debug(6,"LondReadable called state = ".$Socket->GetState());


my $State = $Socket->GetState(); # All action depends on the state.	my $State = $Socket->GetState(); # All action depends on the state.
Line 799 sub LondReadable {	Line 831 sub LondReadable {
}	}
$Watcher->cancel();	$Watcher->cancel();
KillSocket($Socket);	KillSocket($Socket);
	$ConnectionRetriesLeft--; # Counts as connection failure
return;	return;
}	}
SocketDump(6,$Socket);	SocketDump(6,$Socket);
Line 832 sub LondReadable {	Line 865 sub LondReadable {
} elsif ($State eq "Idle") {	} elsif ($State eq "Idle") {
# If necessary, complete a transaction and then go into the	# If necessary, complete a transaction and then go into the
# idle queue.	# idle queue.
	# Note that a trasition to idle indicates a live lond
	# on the other end so reset the connection retries.
	#
	$ConnectionRetriesLeft = $ConnectionRetries; # success resets the count
$Watcher->cancel();	$Watcher->cancel();
if(exists($ActiveTransactions{$Socket})) {	if(exists($ActiveTransactions{$Socket})) {
Debug(8,"Completing transaction!!");	Debug(8,"Completing transaction!!");
Line 1044 sub QueueDelayed {	Line 1081 sub QueueDelayed {
Debug(4, "Delayed path: ".$path);	Debug(4, "Delayed path: ".$path);
opendir(DIRHANDLE, $path);	opendir(DIRHANDLE, $path);

@alldelayed = grep /\.$RemoteHost$/, readdir DIRHANDLE;	my @alldelayed = grep /\.$RemoteHost$/, readdir DIRHANDLE;
Debug(4, "Got ".$alldelayed." delayed files");
closedir(DIRHANDLE);	closedir(DIRHANDLE);
my $dfname;	my $dfname;
my $reqfile;	my $reqfile;
Line 1087 sub MakeLondConnection {	Line 1123 sub MakeLondConnection {
$ConnectionRetriesLeft--;	$ConnectionRetriesLeft--;
return 0; # Failure.	return 0; # Failure.
} else {	} else {
$ConnectionRetriesLeft = $ConnectionRetries; # success resets the count
# The connection needs to have writability	# The connection needs to have writability
# monitored in order to send the init sequence	# monitored in order to send the init sequence
# that starts the whole authentication/key	# that starts the whole authentication/key
Line 1102 sub MakeLondConnection {	Line 1138 sub MakeLondConnection {

$Connection->SetTimeoutCallback(\&SocketTimeout);	$Connection->SetTimeoutCallback(\&SocketTimeout);

$event = Event->io(fd => $Socket,	my $event = Event->io(fd => $Socket,
poll => 'w',	poll => 'w',
cb => \&LondWritable,	cb => \&LondWritable,
data => $Connection,	data => $Connection,
Line 1158 sub StartRequest {	Line 1194 sub StartRequest {
$ActiveTransactions{$Lond} = $Request;	$ActiveTransactions{$Lond} = $Request;

$Lond->InitiateTransaction($Request->getRequest());	$Lond->InitiateTransaction($Request->getRequest());
$event = Event->io(fd => $Socket,	my $event = Event->io(fd => $Socket,
poll => "w",	poll => "w",
cb => \&LondWritable,	cb => \&LondWritable,
data => $Lond,	data => $Lond,
Line 1200 sub QueueTransaction {	Line 1236 sub QueueTransaction {
Debug(8,"Must queue...");	Debug(8,"Must queue...");
$WorkQueue->enqueue($requestData);	$WorkQueue->enqueue($requestData);
if($ConnectionCount < $MaxConnectionCount) {	if($ConnectionCount < $MaxConnectionCount) {
Debug(4,"Starting additional lond connection");	if($ConnectionRetriesLeft > 0) {
if(MakeLondConnection() == 0) {	Debug(4,"Starting additional lond connection");
EmptyQueue(); # Fail transactions, can't make connection.	if(MakeLondConnection() == 0) {
	EmptyQueue(); # Fail transactions, can't make connection.
	}
	} else {
	ShowStatus(GetServerHost()." >>> DEAD !!!! <<<");
	EmptyQueue(); # It's worse than that ... he's dead Jim.
}	}
}	}
} else { # Can start the request:	} else { # Can start the request:
Line 1368 sub SetupLoncListener {	Line 1409 sub SetupLoncListener {
Child USR1 signal handler to report the most recent status	Child USR1 signal handler to report the most recent status
into the status file.	into the status file.

	We also use this to reset the retries count in order to allow the
	client to retry connections with a previously dead server.
=cut	=cut
sub ChildStatus {	sub ChildStatus {
my $event = shift;	my $event = shift;
Line 1378 sub ChildStatus {	Line 1421 sub ChildStatus {
my $fh = IO::File->new(">>$docdir/lon-status/loncstatus.txt");	my $fh = IO::File->new(">>$docdir/lon-status/loncstatus.txt");
print $fh $$."\t".$RemoteHost."\t".$Status."\t".	print $fh $$."\t".$RemoteHost."\t".$Status."\t".
$RecentLogEntry."\n";	$RecentLogEntry."\n";
	$ConnectionRetriesLeft = $ConnectionRetries;
}	}

=pod	=pod
Line 1473 sub CreateChild {	Line 1517 sub CreateChild {
my $host = shift;	my $host = shift;
$RemoteHost = $host;	$RemoteHost = $host;
Log("CRITICAL", "Forking server for ".$host);	Log("CRITICAL", "Forking server for ".$host);
$pid = fork;	my $pid = fork;
if($pid) { # Parent	if($pid) { # Parent
$RemoteHost = "Parent";	$RemoteHost = "Parent";
$ChildHash{$pid} = $RemoteHost;	$ChildHash{$pid} = $RemoteHost;
Line 1481 sub CreateChild {	Line 1525 sub CreateChild {

} else { # child.	} else { # child.
ShowStatus("Connected to ".$RemoteHost);	ShowStatus("Connected to ".$RemoteHost);
$SIG{INT} = DEFAULT;	$SIG{INT} = 'DEFAULT';
sigprocmask(SIG_UNBLOCK, $sigset);	sigprocmask(SIG_UNBLOCK, $sigset);
ChildProcess; # Does not return.	ChildProcess; # Does not return.
}	}
Line 1518 if ($childpid != 0) {	Line 1562 if ($childpid != 0) {
#	#

ShowStatus("Parent writing pid file:");	ShowStatus("Parent writing pid file:");
$execdir = $perlvar{'lonDaemons'};	my $execdir = $perlvar{'lonDaemons'};
open (PIDSAVE, ">$execdir/logs/lonc.pid");	open (PIDSAVE, ">$execdir/logs/lonc.pid");
print PIDSAVE "$$\n";	print PIDSAVE "$$\n";
close(PIDSAVE);	close(PIDSAVE);
Line 1537 Log("CRITICAL", "--------------- Startin	Line 1581 Log("CRITICAL", "--------------- Startin
my $HostIterator = LondConnection::GetHostIterator;	my $HostIterator = LondConnection::GetHostIterator;
while (! $HostIterator->end()) {	while (! $HostIterator->end()) {

$hostentryref = $HostIterator->get();	my $hostentryref = $HostIterator->get();
CreateChild($hostentryref->[0]);	CreateChild($hostentryref->[0]);
$HostIterator->next();	$HostIterator->next();
}	}
Line 1555 $SIG{INT} = \&Terminate;	Line 1599 $SIG{INT} = \&Terminate;
$SIG{TERM} = \&Terminate;	$SIG{TERM} = \&Terminate;
$SIG{HUP} = \&Restart;	$SIG{HUP} = \&Restart;
$SIG{USR1} = \&CheckKids;	$SIG{USR1} = \&CheckKids;
	$SIG{USR2} = \&UpdateKids; # LonManage update request.

while(1) {	while(1) {
$deadchild = wait();	my $deadchild = wait();
if(exists $ChildHash{$deadchild}) { # need to restart.	if(exists $ChildHash{$deadchild}) { # need to restart.
$deadhost = $ChildHash{$deadchild};	my $deadhost = $ChildHash{$deadchild};
delete($ChildHash{$deadchild});	delete($ChildHash{$deadchild});
Log("WARNING","Lost child pid= ".$deadchild.	Log("WARNING","Lost child pid= ".$deadchild.
"Connected to host ".$deadhost);	"Connected to host ".$deadhost);
Line 1589 sub CheckKids {	Line 1634 sub CheckKids {
my $now=time;	my $now=time;
my $local=localtime($now);	my $local=localtime($now);
print $fh "LONC status $local - parent $$ \n\n";	print $fh "LONC status $local - parent $$ \n\n";
foreach $pid (keys %ChildHash) {	foreach my $pid (keys %ChildHash) {
Debug(2, "Sending USR1 -> $pid");	Debug(2, "Sending USR1 -> $pid");
kill 'USR1' => $pid; # Tell Child to report status.	kill 'USR1' => $pid; # Tell Child to report status.
sleep 1; # Wait so file doesn't intermix.	sleep 1; # Wait so file doesn't intermix.
Line 1598 sub CheckKids {	Line 1643 sub CheckKids {

=pod	=pod

	=head1 UpdateKids

	parent's SIGUSR1 handler. This handler:

	=item

	Rereads the hosts file.

	=item

	Kills off (via sigint) children for hosts that have disappeared.

	=item

	HUP's children for hosts that already exist (this just forces a status display
	and resets the connection retry count for that host.

	=item

	Starts new children for hosts that have been added to the hosts.tab file since
	the start of the master program and maintains them.

	=cut

	sub UpdateKids {
	}


	=pod

=head1 Restart	=head1 Restart

Signal handler for HUP... all children are killed and	Signal handler for HUP... all children are killed and
Line 1607 the config file.	Line 1682 the config file.
=cut	=cut

sub Restart {	sub Restart {
KillThemAll; # First kill all the children.	&KillThemAll; # First kill all the children.
Log("CRITICAL", "Restarting");	Log("CRITICAL", "Restarting");
my $execdir = $perlvar{'lonDaemons'};	my $execdir = $perlvar{'lonDaemons'};
unlink("$execdir/logs/lonc.pid");	unlink("$execdir/logs/lonc.pid");
Line 1626 SIGHUP. Responds to sigint and sigterm.	Line 1701 SIGHUP. Responds to sigint and sigterm.
sub KillThemAll {	sub KillThemAll {
Debug(2, "Kill them all!!");	Debug(2, "Kill them all!!");
local($SIG{CHLD}) = 'IGNORE'; # Our children >will< die.	local($SIG{CHLD}) = 'IGNORE'; # Our children >will< die.
foreach $pid (keys %ChildHash) {	foreach my $pid (keys %ChildHash) {
my $serving = $ChildHash{$pid};	my $serving = $ChildHash{$pid};
Debug(2, "Killing lonc for $serving pid = $pid");	Debug(2, "Killing lonc for $serving pid = $pid");
ShowStatus("Killing lonc for $serving pid = $pid");	ShowStatus("Killing lonc for $serving pid = $pid");

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>

Removed from v.1.21
changed lines
	Added in v.1.24