loncom/loncnew - diff

Return to loncnew CVS log

Up to [LON-CAPA] / loncom

Diff for /loncom/loncnew between versions 1.30 and 1.41

version 1.30, 2003/10/27 10:09:21	version 1.41, 2004/02/09 13:39:28
Line 35	Line 35
# - Add ability to create/negotiate lond connections (done).	# - Add ability to create/negotiate lond connections (done).
# - Add general logic for dispatching requests and timeouts. (done).	# - Add general logic for dispatching requests and timeouts. (done).
# - Add support for the lonc/lond requests. (done).	# - Add support for the lonc/lond requests. (done).
# - Add logging/status monitoring.	# - Add logging/status monitoring. (done)
# - Add Signal handling - HUP restarts. USR1 status report.	# - Add Signal handling - HUP restarts. USR1 status report. (done)
# - Add Configuration file I/O (done).	# - Add Configuration file I/O (done).
# - Add management/status request interface.	# - Add management/status request interface. (done)
# - Add deferred request capability. (done)	# - Add deferred request capability. (done)
# - Detect transmission timeouts.	# - Detect transmission timeouts. (done)
#	#

# Change log:
# $Log$
# Revision 1.30 2003/10/27 10:09:21 foxr
# Tighten up a few compares to eq and flip a few debug levels around... nothing
# critical
#
# Revision 1.29 2003/10/21 14:24:42 foxr
# Fix little typo that may explain growth of connections
#
# Revision 1.28 2003/10/14 15:36:21 albertel
# - making it easier to run loncnew,
# /etc/init.d/loncontrol startnew
# /etc/init.d/loncontrol restartnew
# will now start loncnew in place of lonc
#
# Revision 1.27 2003/10/07 11:23:03 foxr
# Installed and tested code to process reinit in parent server.
#
# Revision 1.26 2003/09/30 11:11:17 foxr
# Add book-keeping hashes to support the re-init procedure.
#
# Revision 1.25 2003/09/23 11:22:14 foxr
# Tested ability to receive sigusr2 This is now logged and must be
# properly implemented as a re-read of hosts and re-init of appropriate
# children.
#
# Revision 1.24 2003/09/16 09:46:42 foxr
# Added skeletal infrastructure to support SIGUSR2 update hosts request.
#
# Revision 1.23 2003/09/15 09:24:49 foxr
# Add use strict and fix all the fallout from that.
#
# Revision 1.22 2003/09/02 10:34:47 foxr
# - Fix errors in host dead detection logic (too many cases where the
# retries left were not getting incremented or just not checked).
# - Added some additional status to the ps axuww display:
# o Remaining retries on a host.
# o >>> DEAD <<< indicator if I've given up on a host.
# - Tested the SIGHUP will reset the retries remaining count (thanks to
# the above status stuff, and get allow the loncnew to re-try again
# on the host (thanks to the log).
#
# Revision 1.21 2003/08/26 09:19:51 foxr
# How embarrassing... put in the SocketTimeout function in loncnew and forgot
# to actually hook it into the LondTransaction. Added this to MakeLondConnection
# where it belongs... hopefully transactions (not just connection attempts) will
# timeout more speedily than the socket errors will catch it.
#
# Revision 1.20 2003/08/25 18:48:11 albertel
# - fixing a forgotten ;
#
# Revision 1.19 2003/08/19 09:31:46 foxr
# Get socket directory from configuration rather than the old hard coded test
# way that I forgot to un-hard code.
#
# Revision 1.18 2003/08/06 09:52:29 foxr
# Also needed to remember to fail in-flight transactions if their sends fail.
#
# Revision 1.17 2003/08/03 00:44:31 foxr
# 1. Correct handling of connection failure: Assume it means the host is
# unreachable and fail all of the queued transactions. Note that the
# inflight transactions should fail on their own time due either to timeout
# or send/receive failures.
# 2. Correct handling of logs for forced death signals. Pull the signal
# from the event watcher.
#
# Revision 1.16 2003/07/29 02:33:05 foxr
# Add SIGINT processing to child processes to toggle annoying trace mode
# on/off.. will try to use this to isolate the compute boud process issue.
#
# Revision 1.15 2003/07/15 02:07:05 foxr
# Added code for lonc/lond transaction timeouts. Who knows if it works right.
# The intent is for a timeout to fail any transaction in progress and kill
# off the sockt that timed out.
#
# Revision 1.14 2003/07/03 02:10:18 foxr
# Get all of the signals to work correctly.
#
# Revision 1.13 2003/07/02 01:31:55 foxr
# Added kill -HUP logic (restart).
#
# Revision 1.11 2003/06/25 01:54:44 foxr
# Fix more problems with transaction failure.
#
# Revision 1.10 2003/06/24 02:46:04 foxr
# Put a limit on the number of times we'll retry a connection.
# Start getting the signal stuff put in as well...note that need to get signals
# going or else the client will permanently give up on dead servers.
#
# Revision 1.9 2003/06/13 02:38:43 foxr
# Add logging in 'expected format'
#
# Revision 1.8 2003/06/11 02:04:35 foxr
# Support delayed transactions... this is done uniformly by encapsulating
# transactions in an object ... a LondTransaction that is implemented by
# LondTransaction.pm
#
# Revision 1.7 2003/06/03 01:59:39 foxr
# complete coding to support deferred transactions.
#
#
use strict;	use strict;
use lib "/home/httpd/lib/perl/";	use lib "/home/httpd/lib/perl/";
use lib "/home/foxr/newloncapa/types";
use Event qw(:DEFAULT );	use Event qw(:DEFAULT );
use POSIX qw(:signal_h);	use POSIX qw(:signal_h);
use POSIX;	use POSIX;
Line 165 use LONCAPA::Configuration;	Line 63 use LONCAPA::Configuration;
use LONCAPA::HashIterator;	use LONCAPA::HashIterator;


#
# Disable all signals we might receive from outside for now.
#


# Read the httpd configuration file to get perl variables	# Read the httpd configuration file to get perl variables
# normally set in apache modules:	# normally set in apache modules:

Line 191 my $DebugLevel = 0;	Line 84 my $DebugLevel = 0;
my $NextDebugLevel= 2; # So Sigint can toggle this.	my $NextDebugLevel= 2; # So Sigint can toggle this.
my $IdleTimeout= 3600; # Wait an hour before pruning connections.	my $IdleTimeout= 3600; # Wait an hour before pruning connections.

	my $LogTransactions = 0; # When True, all transactions/replies get logged.

#	#
# The variables below are only used by the child processes.	# The variables below are only used by the child processes.
#	#
Line 207 my $Status = ""; # Current stat	Line 102 my $Status = ""; # Current stat
my $RecentLogEntry = "";	my $RecentLogEntry = "";
my $ConnectionRetries=2; # Number of connection retries allowed.	my $ConnectionRetries=2; # Number of connection retries allowed.
my $ConnectionRetriesLeft=2; # Number of connection retries remaining.	my $ConnectionRetriesLeft=2; # Number of connection retries remaining.
	my $LondVersion = "unknown"; # Version of lond we talk with.

#	#
# The hash below gives the HTML format for log messages	# The hash below gives the HTML format for log messages
Line 312 sub GetPeername {	Line 208 sub GetPeername {
return $peerfile;	return $peerfile;
}	}
}	}
#----------------------------- Timer management ------------------------
=pod	=pod

=head2 Debug	=head2 Debug
Line 364 sub ShowStatus {	Line 259 sub ShowStatus {
=cut	=cut
sub SocketTimeout {	sub SocketTimeout {
my $Socket = shift;	my $Socket = shift;
	Log("WARNING", "A socket timeout was detected");
	Debug(0, " SocketTimeout called: ");
	$Socket->Dump();
KillSocket($Socket); # A transaction timeout also counts as	KillSocket($Socket); # A transaction timeout also counts as
# a connection failure:	# a connection failure:
$ConnectionRetriesLeft--;	$ConnectionRetriesLeft--;
}	}
	#----------------------------- Timer management ------------------------

=pod	=pod

Line 403 sub Tick {	Line 301 sub Tick {
#	#
# For each inflight transaction, tick down its timeout counter.	# For each inflight transaction, tick down its timeout counter.
#	#
foreach my $item (keys %ActiveTransactions) {
my $Socket = $ActiveTransactions{$item}->getServer();	foreach my $item (keys %ActiveConnections) {
$Socket->Tick();	my $State = $ActiveConnections{$item}->data->GetState();
	if ($State ne 'Idle') {
	Debug(5,"Ticking Socket $State $item");
	$ActiveConnections{$item}->data->Tick();
	}
}	}
# Do we have work in the queue, but no connections to service them?	# Do we have work in the queue, but no connections to service them?
# If so, try to make some new connections to get things going again.	# If so, try to make some new connections to get things going again.
Line 452 Trigger disconnections of idle sockets.	Line 354 Trigger disconnections of idle sockets.

sub SetupTimer {	sub SetupTimer {
Debug(6, "SetupTimer");	Debug(6, "SetupTimer");
Event->timer(interval => 1, debug => 1, cb => \&Tick );	Event->timer(interval => 1, cb => \&Tick );
}	}

=pod	=pod
Line 609 sub CompleteTransaction {	Line 511 sub CompleteTransaction {

if (!$Transaction->isDeferred()) { # Normal transaction	if (!$Transaction->isDeferred()) { # Normal transaction
my $data = $Socket->GetReply(); # Data to send.	my $data = $Socket->GetReply(); # Data to send.
	if($LogTransactions) {
	Log("SUCCESS", "Reply from lond: '$data'");
	}
StartClientReply($Transaction, $data);	StartClientReply($Transaction, $data);
} else { # Delete deferred transaction file.	} else { # Delete deferred transaction file.
Log("SUCCESS", "A delayed transaction was completed");	Log("SUCCESS", "A delayed transaction was completed");
Line 753 sub KillSocket {	Line 658 sub KillSocket {
}	}
if(exists($ActiveConnections{$Socket})) {	if(exists($ActiveConnections{$Socket})) {
delete($ActiveConnections{$Socket});	delete($ActiveConnections{$Socket});
	$ConnectionCount--;
	if ($ConnectionCount < 0) { $ConnectionCount = 0; }
}	}
$ConnectionCount--;

# If the connection count has gone to zero and there is work in the	# If the connection count has gone to zero and there is work in the
# work queue, the work all gets failed with con_lost.	# work queue, the work all gets failed with con_lost.
#	#
Line 786 The connection must echo the challenge b	Line 691 The connection must echo the challenge b
The challenge has been replied to. The we are receiveing the	The challenge has been replied to. The we are receiveing the
'ok' from the partner.	'ok' from the partner.

	=head3 State=ReadingVersionString

	We have requested the lond version and are reading the
	version back. Upon completion, we'll store the version away
	for future use(?).

	=head3 State=HostSet

	We have selected the domain name of our peer (multhomed hosts)
	and are getting the reply (presumably ok) back.

=head3 State=RequestingKey	=head3 State=RequestingKey

The ok has been received and we need to send the request for	The ok has been received and we need to send the request for
Line 840 sub LondReadable {	Line 756 sub LondReadable {
&Debug(2, "Socket->Readable returned: $status");	&Debug(2, "Socket->Readable returned: $status");

if($status != 0) {	if($status != 0) {
# bad return from socket read. Currently this means that	# bad return from socket read. Currently this means that
# The socket has become disconnected. We fail the transaction.	# The socket has become disconnected. We fail the transaction.

Log("WARNING",	Log("WARNING",
Line 858 sub LondReadable {	Line 774 sub LondReadable {
$State = $Socket->GetState(); # Update in case of transition.	$State = $Socket->GetState(); # Update in case of transition.
&Debug(6, "After read, state is ".$State);	&Debug(6, "After read, state is ".$State);

if($State eq "Initialized") {	if($State eq "Initialized") {


} elsif ($State eq "ChallengeReceived") {	} elsif ($State eq "ChallengeReceived") {
# The challenge must be echoed back; The state machine	# The challenge must be echoed back; The state machine
# in the connection takes care of setting that up. Just	# in the connection takes care of setting that up. Just
# need to transition to writable:	# need to transition to writable:

$Watcher->cb(\&LondWritable);	$Watcher->cb(\&LondWritable);
$Watcher->poll("w");	$Watcher->poll("w");

} elsif ($State eq "ChallengeReplied") {	} elsif ($State eq "ChallengeReplied") {

	} elsif ($State eq "RequestingVersion") {
	# Need to ask for the version... that is writiability:

	$Watcher->cb(\&LondWritable);
	$Watcher->poll("w");

	} elsif ($State eq "ReadingVersionString") {
	# Read the rest of the version string...
	} elsif ($State eq "SetHost") {
	# Need to request the actual domain get set...

	$Watcher->cb(\&LondWritable);
	$Watcher->poll("w");
	} elsif ($State eq "HostSet") {
	# Reading the 'ok' from the peer.

} elsif ($State eq "RequestingKey") {	} elsif ($State eq "RequestingKey") {
# The ok was received. Now we need to request the key	# The ok was received. Now we need to request the key
Line 882 sub LondReadable {	Line 813 sub LondReadable {
} elsif ($State eq "ReceivingKey") {	} elsif ($State eq "ReceivingKey") {

} elsif ($State eq "Idle") {	} elsif ($State eq "Idle") {

	# This is as good a spot as any to get the peer version
	# string:

	if($LondVersion eq "unknown") {
	$LondVersion = $Socket->PeerVersion();
	Log("INFO", "Connected to lond version: $LondVersion");
	}
# If necessary, complete a transaction and then go into the	# If necessary, complete a transaction and then go into the
# idle queue.	# idle queue.
# Note that a trasition to idle indicates a live lond	# Note that a trasition to idle indicates a live lond
Line 911 sub LondReadable {	Line 850 sub LondReadable {


} else {	} else {
# Invalid state.	# Invalid state.
Debug(4, "Invalid state in LondReadable");	Debug(4, "Invalid state in LondReadable");
}	}
}	}
Line 1005 sub LondWritable {	Line 944 sub LondWritable {
KillSocket($Socket);	KillSocket($Socket);
return;	return;
}	}

# "init" is being sent...	# "init" is being sent...


} elsif ($State eq "Initialized") {	} elsif ($State eq "Initialized") {

# Now that init was sent, we switch	# Now that init was sent, we switch
Line 1015 sub LondWritable {	Line 954 sub LondWritable {

$Watcher->cb(\&LondReadable);	$Watcher->cb(\&LondReadable);
$Watcher->poll("r");	$Watcher->poll("r");

} elsif ($State eq "ChallengeReceived") {	} elsif ($State eq "ChallengeReceived") {
# We received the challenge, now we	# We received the challenge, now we
# are echoing it back. This is a no-op,	# are echoing it back. This is a no-op,
Line 1034 sub LondWritable {	Line 973 sub LondWritable {

$Watcher->cb(\&LondReadable);	$Watcher->cb(\&LondReadable);
$Watcher->poll("r");	$Watcher->poll("r");
	} elsif ($State eq "RequestingVersion") {
	# Sending the peer a version request...

	if($Socket->Writable() != 0) {
	$Watcher->cancel();
	KillSocket($Socket);
	return;
	}
	} elsif ($State eq "ReadingVersionString") {
	# Transition to read since we have sent the
	# version command and now just need to read the
	# version string from the peer:

	$Watcher->cb(\&LondReadable);
	$Watcher->poll("r");

	} elsif ($State eq "SetHost") {
	# Setting the remote domain...

	if($Socket->Writable() != 0) {
	$Watcher->cancel();
	KillSocket($Socket);
	return;
	}
	} elsif ($State eq "HostSet") {
	# Back to readable to get the ok.

	$Watcher->cb(\&LondReadable);
	$Watcher->poll("r");


} elsif ($State eq "RequestingKey") {	} elsif ($State eq "RequestingKey") {
# At this time we're requesting the key.	# At this time we're requesting the key.
Line 1057 sub LondWritable {	Line 1026 sub LondWritable {
$Watcher->poll("r");	$Watcher->poll("r");

} elsif ($State eq "SendingRequest") {	} elsif ($State eq "SendingRequest") {

# At this time we are sending a request to the	# At this time we are sending a request to the
# peer... write the next chunk:	# peer... write the next chunk:

Line 1313 sub ClientRequest {	Line 1283 sub ClientRequest {
exit;	exit;
}	}
Debug(8, "Complete transaction received: ".$data);	Debug(8, "Complete transaction received: ".$data);
	if($LogTransactions) {
	Log("SUCCESS", "Transaction: '$data'"); # Transaction has \n.
	}
my $Transaction = LondTransaction->new($data);	my $Transaction = LondTransaction->new($data);
$Transaction->SetClient($socket);	$Transaction->SetClient($socket);
QueueTransaction($Transaction);	QueueTransaction($Transaction);
Line 1421 sub SetupLoncListener {	Line 1394 sub SetupLoncListener {
fd => $socket);	fd => $socket);
}	}

	#
	# Toggle transaction logging.
	# Implicit inputs:
	# LogTransactions
	# Implicit Outputs:
	# LogTransactions
	sub ToggleTransactionLogging {
	print STDERR "Toggle transaction logging...\n";
	if(!$LogTransactions) {
	$LogTransactions = 1;
	} else {
	$LogTransactions = 0;
	}


	Log("SUCCESS", "Toggled transaction logging: $LogTransactions \n");
	}

=pod	=pod

=head2 ChildStatus	=head2 ChildStatus
Line 1440 sub ChildStatus {	Line 1431 sub ChildStatus {
my $fh = IO::File->new(">>$docdir/lon-status/loncstatus.txt");	my $fh = IO::File->new(">>$docdir/lon-status/loncstatus.txt");
print $fh $$."\t".$RemoteHost."\t".$Status."\t".	print $fh $$."\t".$RemoteHost."\t".$Status."\t".
$RecentLogEntry."\n";	$RecentLogEntry."\n";
	#
	# Write out information about each of the connections:
	#
	print $fh "Active connection statuses: \n";
	my $i = 1;
	print STDERR "================================= Socket Status Dump:\n";
	foreach my $item (keys %ActiveConnections) {
	my $Socket = $ActiveConnections{$item}->data;
	my $state = $Socket->GetState();
	print $fh "Connection $i State: $state\n";
	print STDERR "---------------------- Connection $i \n";
	$Socket->Dump();
	$i++;
	}
$ConnectionRetriesLeft = $ConnectionRetries;	$ConnectionRetriesLeft = $ConnectionRetries;
}	}

Line 1504 sub ChildProcess {	Line 1509 sub ChildProcess {
Event->signal(signal => "USR1",	Event->signal(signal => "USR1",
cb => \&ChildStatus,	cb => \&ChildStatus,
data => "USR1");	data => "USR1");
	Event->signal(signal => "USR2",
	cb => \&ToggleTransactionLogging);
Event->signal(signal => "INT",	Event->signal(signal => "INT",
cb => \&ToggleDebug,	cb => \&ToggleDebug,
data => "INT");	data => "INT");
Line 1598 ShowStatus("Forking node servers");	Line 1605 ShowStatus("Forking node servers");

Log("CRITICAL", "--------------- Starting children ---------------");	Log("CRITICAL", "--------------- Starting children ---------------");

	LondConnection::ReadConfig; # Read standard config files.
my $HostIterator = LondConnection::GetHostIterator;	my $HostIterator = LondConnection::GetHostIterator;
while (! $HostIterator->end()) {	while (! $HostIterator->end()) {

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>

Removed from v.1.30
changed lines
	Added in v.1.41