loncom/loncnew - diff

Return to loncnew CVS log

Up to [LON-CAPA] / loncom

Diff for /loncom/loncnew between versions 1.15 and 1.34

version 1.15, 2003/07/15 02:07:05	version 1.34, 2003/12/11 23:18:37
Line 7	Line 7
# Copyright Michigan State University Board of Trustees	# Copyright Michigan State University Board of Trustees
#	#
# This file is part of the LearningOnline Network with CAPA (LON-CAPA).	# This file is part of the LearningOnline Network with CAPA (LON-CAPA).
#	## LON-CAPA is free software; you can redistribute it and/or modify
# LON-CAPA is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by	# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or	# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.	# (at your option) any later version.
Line 44	Line 43
# - Detect transmission timeouts.	# - Detect transmission timeouts.
#	#

# Change log:	use strict;
# $Log$
# Revision 1.15 2003/07/15 02:07:05 foxr
# Added code for lonc/lond transaction timeouts. Who knows if it works right.
# The intent is for a timeout to fail any transaction in progress and kill
# off the sockt that timed out.
#
# Revision 1.14 2003/07/03 02:10:18 foxr
# Get all of the signals to work correctly.
#
# Revision 1.13 2003/07/02 01:31:55 foxr
# Added kill -HUP logic (restart).
#
# Revision 1.11 2003/06/25 01:54:44 foxr
# Fix more problems with transaction failure.
#
# Revision 1.10 2003/06/24 02:46:04 foxr
# Put a limit on the number of times we'll retry a connection.
# Start getting the signal stuff put in as well...note that need to get signals
# going or else 6the client will permanently give up on dead servers.
#
# Revision 1.9 2003/06/13 02:38:43 foxr
# Add logging in 'expected format'
#
# Revision 1.8 2003/06/11 02:04:35 foxr
# Support delayed transactions... this is done uniformly by encapsulating
# transactions in an object ... a LondTransaction that is implemented by
# LondTransaction.pm
#
# Revision 1.7 2003/06/03 01:59:39 foxr
# complete coding to support deferred transactions.
#
#

use lib "/home/httpd/lib/perl/";	use lib "/home/httpd/lib/perl/";
use lib "/home/foxr/newloncapa/types";
use Event qw(:DEFAULT );	use Event qw(:DEFAULT );
use POSIX qw(:signal_h);	use POSIX qw(:signal_h);
use POSIX;	use POSIX;
Line 101 use LONCAPA::HashIterator;	Line 66 use LONCAPA::HashIterator;
#	#
# Disable all signals we might receive from outside for now.	# Disable all signals we might receive from outside for now.
#	#
#$SIG{QUIT} = IGNORE;
#$SIG{HUP} = IGNORE;
#$SIG{USR1} = IGNORE;
#$SIG{INT} = IGNORE;
#$SIG{CHLD} = IGNORE;
#$SIG{__DIE__} = IGNORE;


# Read the httpd configuration file to get perl variables	# Read the httpd configuration file to get perl variables
Line 119 my %perlvar = %{$perlvarref};	Line 78 my %perlvar = %{$perlvarref};
# parent and shared variables.	# parent and shared variables.

my %ChildHash; # by pid -> host.	my %ChildHash; # by pid -> host.
	my %HostToPid; # By host -> pid.
	my %HostHash; # by loncapaname -> IP.


my $MaxConnectionCount = 10; # Will get from config later.	my $MaxConnectionCount = 10; # Will get from config later.
my $ClientConnection = 0; # Uniquifier for client events.	my $ClientConnection = 0; # Uniquifier for client events.

my $DebugLevel = 0;	my $DebugLevel = 0;
	my $NextDebugLevel= 2; # So Sigint can toggle this.
my $IdleTimeout= 3600; # Wait an hour before pruning connections.	my $IdleTimeout= 3600; # Wait an hour before pruning connections.

#	#
# The variables below are only used by the child processes.	# The variables below are only used by the child processes.
#	#
my $RemoteHost; # Name of host child is talking to.	my $RemoteHost; # Name of host child is talking to.
my $UnixSocketDir= "/home/httpd/sockets";	my $UnixSocketDir= $perlvar{'lonSockDir'};
my $IdleConnections = Stack->new(); # Set of idle connections	my $IdleConnections = Stack->new(); # Set of idle connections
my %ActiveConnections; # Connections to the remote lond.	my %ActiveConnections; # Connections to the remote lond.
my %ActiveTransactions; # LondTransactions in flight.	my %ActiveTransactions; # LondTransactions in flight.
Line 141 my $ConnectionCount = 0;	Line 103 my $ConnectionCount = 0;
my $IdleSeconds = 0; # Number of seconds idle.	my $IdleSeconds = 0; # Number of seconds idle.
my $Status = ""; # Current status string.	my $Status = ""; # Current status string.
my $RecentLogEntry = "";	my $RecentLogEntry = "";
my $ConnectionRetries=5; # Number of connection retries allowed.	my $ConnectionRetries=2; # Number of connection retries allowed.
my $ConnectionRetriesLeft=5; # Number of connection retries remaining.	my $ConnectionRetriesLeft=2; # Number of connection retries remaining.

#	#
# The hash below gives the HTML format for log messages	# The hash below gives the HTML format for log messages
Line 240 sub GetPeername {	Line 202 sub GetPeername {
my $peerip;	my $peerip;
if($AdrFamily == AF_INET) {	if($AdrFamily == AF_INET) {
($peerport, $peerip) = sockaddr_in($peer);	($peerport, $peerip) = sockaddr_in($peer);
my $peername = gethostbyaddr($iaddr, $AdrFamily);	my $peername = gethostbyaddr($peerip, $AdrFamily);
return $peername;	return $peername;
} elsif ($AdrFamily == AF_UNIX) {	} elsif ($AdrFamily == AF_UNIX) {
my $peerfile;	my $peerfile;
Line 261 sub Debug {	Line 223 sub Debug {
my $level = shift;	my $level = shift;
my $message = shift;	my $message = shift;
if ($level <= $DebugLevel) {	if ($level <= $DebugLevel) {
print $message." host = ".$RemoteHost."\n";	Log("INFO", "-Debug- $message host = $RemoteHost");
}	}
}	}

Line 301 sub ShowStatus {	Line 263 sub ShowStatus {
sub SocketTimeout {	sub SocketTimeout {
my $Socket = shift;	my $Socket = shift;

KillSocket($Socket);	KillSocket($Socket); # A transaction timeout also counts as
	# a connection failure:
	$ConnectionRetriesLeft--;
}	}

=pod	=pod
Line 315 Invoked each timer tick.	Line 279 Invoked each timer tick.

sub Tick {	sub Tick {
my $client;	my $client;
ShowStatus(GetServerHost()." Connection count: ".$ConnectionCount);	if($ConnectionRetriesLeft > 0) {
	ShowStatus(GetServerHost()." Connection count: ".$ConnectionCount
	." Retries remaining: ".$ConnectionRetriesLeft);
	} else {
	ShowStatus(GetServerHost()." >> DEAD <<");
	}
# Is it time to prune connection count:	# Is it time to prune connection count:


Line 324 sub Tick {	Line 292 sub Tick {
($WorkQueue->Count() == 0)) { # Idle connections and nothing to do?	($WorkQueue->Count() == 0)) { # Idle connections and nothing to do?
$IdleSeconds++;	$IdleSeconds++;
if($IdleSeconds > $IdleTimeout) { # Prune a connection...	if($IdleSeconds > $IdleTimeout) { # Prune a connection...
$Socket = $IdleConnections->pop();	my $Socket = $IdleConnections->pop();
KillSocket($Socket);	KillSocket($Socket);
}	}
} else {	} else {
Line 333 sub Tick {	Line 301 sub Tick {
#	#
# For each inflight transaction, tick down its timeout counter.	# For each inflight transaction, tick down its timeout counter.
#	#
foreach $item (keys %ActiveTransactions) {	foreach my $item (keys %ActiveTransactions) {
my $Socket = $ActiveTransactions{$item}->getServer();	my $Socket = $ActiveTransactions{$item}->getServer();
$Socket->Tick();	$Socket->Tick();
}	}
	foreach my $item (keys %ActiveConnections) {
	my $State = $ActiveConnections{$item}->data->GetState();
	if ($State ne 'Idle' && $State ne 'SendingRequest' &&
	$State ne 'ReceivingReply') {
	Debug(5,"Ticking Socket $State $item");
	$ActiveConnections{$item}->data->Tick();
	}
	}
# Do we have work in the queue, but no connections to service them?	# Do we have work in the queue, but no connections to service them?
# If so, try to make some new connections to get things going again.	# If so, try to make some new connections to get things going again.
#	#
Line 346 sub Tick {	Line 322 sub Tick {
if ($ConnectionRetriesLeft > 0) {	if ($ConnectionRetriesLeft > 0) {
my $Connections = ($Requests <= $MaxConnectionCount) ?	my $Connections = ($Requests <= $MaxConnectionCount) ?
$Requests : $MaxConnectionCount;	$Requests : $MaxConnectionCount;
Debug(1,"Work but no connections, start ".$Connections." of them");	Debug(5,"Work but no connections, start ".$Connections." of them");
for ($i =0; $i < $Connections; $i++) {	my $successCount = 0;
MakeLondConnection();	for (my $i =0; $i < $Connections; $i++) {
	$successCount += MakeLondConnection();
	}
	if($successCount == 0) { # All connections failed:
	Debug(5,"Work in queue failed to make any connectiouns\n");
	EmptyQueue(); # Fail pending transactions with con_lost.
}	}
} else {	} else {
Debug(1,"Work in queue, but gave up on connections..flushing\n");	ShowStatus(GetServerHost()." >>> DEAD!!! <<<");
	Debug(5,"Work in queue, but gave up on connections..flushing\n");
EmptyQueue(); # Connections can't be established.	EmptyQueue(); # Connections can't be established.
}	}

Line 376 Trigger disconnections of idle sockets.	Line 358 Trigger disconnections of idle sockets.

sub SetupTimer {	sub SetupTimer {
Debug(6, "SetupTimer");	Debug(6, "SetupTimer");
Event->timer(interval => 1, debug => 1, cb => \&Tick );	Event->timer(interval => 1, cb => \&Tick );
}	}

=pod	=pod
Line 398 sub ServerToIdle {	Line 380 sub ServerToIdle {
my $Socket = shift; # Get the socket.	my $Socket = shift; # Get the socket.
delete($ActiveTransactions{$Socket}); # Server has no transaction	delete($ActiveTransactions{$Socket}); # Server has no transaction

&Debug(6, "Server to idle");	&Debug(5, "Server to idle");

# If there's work to do, start the transaction:	# If there's work to do, start the transaction:

$reqdata = $WorkQueue->dequeue(); # This is a LondTransaction	my $reqdata = $WorkQueue->dequeue(); # This is a LondTransaction
unless($reqdata eq undef) {	if ($reqdata ne undef) {
Debug(9, "Queue gave request data: ".$reqdata->getRequest());	Debug(5, "Queue gave request data: ".$reqdata->getRequest());
&StartRequest($Socket, $reqdata);	&StartRequest($Socket, $reqdata);

} else {	} else {

# There's no work waiting, so push the server to idle list.	# There's no work waiting, so push the server to idle list.
&Debug(8, "No new work requests, server connection going idle");	&Debug(5, "No new work requests, server connection going idle");
$IdleConnections->push($Socket);	$IdleConnections->push($Socket);
}	}
}	}
Line 456 sub ClientWritable {	Line 438 sub ClientWritable {
# request.	# request.

&Debug(9,"Send result is ".$result." Defined: ".defined($result));	&Debug(9,"Send result is ".$result." Defined: ".defined($result));
if(defined($result)) {	if($result ne undef) {
&Debug(9, "send result was defined");	&Debug(9, "send result was defined");
if($result == length($Data)) { # Entire string sent.	if($result == length($Data)) { # Entire string sent.
&Debug(9, "ClientWritable data all written");	&Debug(9, "ClientWritable data all written");
Line 527 The transaction that is being completed.	Line 509 The transaction that is being completed.
=cut	=cut

sub CompleteTransaction {	sub CompleteTransaction {
&Debug(6,"Complete transaction");	&Debug(5,"Complete transaction");
my $Socket = shift;	my $Socket = shift;
my $Transaction = shift;	my $Transaction = shift;

Line 536 sub CompleteTransaction {	Line 518 sub CompleteTransaction {
StartClientReply($Transaction, $data);	StartClientReply($Transaction, $data);
} else { # Delete deferred transaction file.	} else { # Delete deferred transaction file.
Log("SUCCESS", "A delayed transaction was completed");	Log("SUCCESS", "A delayed transaction was completed");
LogPerm("S:$Client:".$Transaction->getRequest());	LogPerm("S:$Transaction->getClient() :".$Transaction->getRequest());
unlink $Transaction->getFile();	unlink $Transaction->getFile();
}	}
}	}
Line 566 sub StartClientReply {	Line 548 sub StartClientReply {
&Debug(8," Reply was: ".$data);	&Debug(8," Reply was: ".$data);
my $Serial = $ActiveClients{$Client};	my $Serial = $ActiveClients{$Client};
my $desc = sprintf("Connection to lonc client %d",	my $desc = sprintf("Connection to lonc client %d",

$Serial);	$Serial);
Event->io(fd => $Client,	Event->io(fd => $Client,
poll => "w",	poll => "w",
Line 597 Parameters:	Line 578 Parameters:

sub FailTransaction {	sub FailTransaction {
my $transaction = shift;	my $transaction = shift;
	Log("WARNING", "Failing transaction ".$transaction->getRequest());
Debug(1, "Failing transaction: ".$transaction->getRequest());	Debug(1, "Failing transaction: ".$transaction->getRequest());
if (!$transaction->isDeferred()) { # If the transaction is deferred we'll get to it.	if (!$transaction->isDeferred()) { # If the transaction is deferred we'll get to it.
my $client = $transaction->getClient();	my $client = $transaction->getClient();
Debug(1," Replying con_lost to ".$transaction->getRequest());	Debug(1," Replying con_lost to ".$transaction->getRequest());
StartClientReply($transaction, "con_lost\n");	StartClientReply($transaction, "con_lost\n");
}	}
	if($ConnectionRetriesLeft <= 0) {
	Log("CRITICAL", "Host marked dead: ".GetServerHost());
	}

}	}

Line 614 sub FailTransaction {	Line 599 sub FailTransaction {

=cut	=cut
sub EmptyQueue {	sub EmptyQueue {
	$ConnectionRetriesLeft--; # Counts as connection failure too.
while($WorkQueue->Count()) {	while($WorkQueue->Count()) {
my $request = $WorkQueue->dequeue(); # This is a transaction	my $request = $WorkQueue->dequeue(); # This is a transaction
FailTransaction($request);	FailTransaction($request);
Line 628 Close all connections open on lond prior	Line 614 Close all connections open on lond prior

=cut	=cut
sub CloseAllLondConnections {	sub CloseAllLondConnections {
foreach $Socket (keys %ActiveConnections) {	foreach my $Socket (keys %ActiveConnections) {
KillSocket($Socket);	KillSocket($Socket);
}	}
}	}
Line 659 nonzero if we are allowed to create a ne	Line 645 nonzero if we are allowed to create a ne
sub KillSocket {	sub KillSocket {
my $Socket = shift;	my $Socket = shift;

	Log("WARNING", "Shutting down a socket");
$Socket->Shutdown();	$Socket->Shutdown();

# If the socket came from the active connection set,	# If the socket came from the active connection set,
Line 679 sub KillSocket {	Line 666 sub KillSocket {
# work queue, the work all gets failed with con_lost.	# work queue, the work all gets failed with con_lost.
#	#
if($ConnectionCount == 0) {	if($ConnectionCount == 0) {
EmptyQueue;	EmptyQueue();
}	}
}	}

Line 748 sub LondReadable {	Line 735 sub LondReadable {
my $Socket = $Watcher->data;	my $Socket = $Watcher->data;
my $client = undef;	my $client = undef;

&Debug(6,"LondReadable called state = ".$State);	&Debug(6,"LondReadable called state = ".$Socket->GetState());


my $State = $Socket->GetState(); # All action depends on the state.	my $State = $Socket->GetState(); # All action depends on the state.

SocketDump(6, $Socket);	SocketDump(6, $Socket);
my $status = $Socket->Readable();	my $status = $Socket->Readable();

&Debug(2, "Socket->Readable returned: $status");	&Debug(2, "Socket->Readable returned: $status");

if($status != 0) {	if($status != 0) {
# bad return from socket read. Currently this means that	# bad return from socket read. Currently this means that
# The socket has become disconnected. We fail the transaction.	# The socket has become disconnected. We fail the transaction.

	Log("WARNING",
	"Lond connection lost.");
if(exists($ActiveTransactions{$Socket})) {	if(exists($ActiveTransactions{$Socket})) {
Debug(3,"Lond connection lost failing transaction");
FailTransaction($ActiveTransactions{$Socket});	FailTransaction($ActiveTransactions{$Socket});
}	}
$Watcher->cancel();	$Watcher->cancel();
KillSocket($Socket);	KillSocket($Socket);
	$ConnectionRetriesLeft--; # Counts as connection failure
return;	return;
}	}
SocketDump(6,$Socket);	SocketDump(6,$Socket);
Line 800 sub LondReadable {	Line 790 sub LondReadable {
} elsif ($State eq "Idle") {	} elsif ($State eq "Idle") {
# If necessary, complete a transaction and then go into the	# If necessary, complete a transaction and then go into the
# idle queue.	# idle queue.
	# Note that a trasition to idle indicates a live lond
	# on the other end so reset the connection retries.
	#
	$ConnectionRetriesLeft = $ConnectionRetries; # success resets the count
$Watcher->cancel();	$Watcher->cancel();
if(exists($ActiveTransactions{$Socket})) {	if(exists($ActiveTransactions{$Socket})) {
Debug(8,"Completing transaction!!");	Debug(5,"Completing transaction!!");
CompleteTransaction($Socket,	CompleteTransaction($Socket,
$ActiveTransactions{$Socket});	$ActiveTransactions{$Socket});
} else {	} else {
Line 912 sub LondWritable {	Line 906 sub LondWritable {
# We'll treat this as if the socket got disconnected:	# We'll treat this as if the socket got disconnected:
Log("WARNING", "Connection to ".$RemoteHost.	Log("WARNING", "Connection to ".$RemoteHost.
" has been disconnected");	" has been disconnected");
	FailTransaction($ActiveTransactions{$Socket});
$Watcher->cancel();	$Watcher->cancel();
KillSocket($Socket);	KillSocket($Socket);
return;	return;
Line 1011 sub QueueDelayed {	Line 1006 sub QueueDelayed {
Debug(4, "Delayed path: ".$path);	Debug(4, "Delayed path: ".$path);
opendir(DIRHANDLE, $path);	opendir(DIRHANDLE, $path);

@alldelayed = grep /\.$RemoteHost$/, readdir DIRHANDLE;	my @alldelayed = grep /\.$RemoteHost$/, readdir DIRHANDLE;
Debug(4, "Got ".$alldelayed." delayed files");
closedir(DIRHANDLE);	closedir(DIRHANDLE);
my $dfname;	my $dfname;
my $reqfile;	my $reqfile;
Line 1049 sub MakeLondConnection {	Line 1043 sub MakeLondConnection {
my $Connection = LondConnection->new(&GetServerHost(),	my $Connection = LondConnection->new(&GetServerHost(),
&GetServerPort());	&GetServerPort());

if($Connection == undef) { # Needs to be more robust later.	if($Connection eq undef) { # Needs to be more robust later.
Log("CRITICAL","Failed to make a connection with lond.");	Log("CRITICAL","Failed to make a connection with lond.");
$ConnectionRetriesLeft--;	$ConnectionRetriesLeft--;
return 0; # Failure.	return 0; # Failure.
} else {	} else {
$ConnectionRetriesLeft = $ConnectionRetries; # success resets the count
# The connection needs to have writability	# The connection needs to have writability
# monitored in order to send the init sequence	# monitored in order to send the init sequence
# that starts the whole authentication/key	# that starts the whole authentication/key
# exchange underway.	# exchange underway.
#	#
my $Socket = $Connection->GetSocket();	my $Socket = $Connection->GetSocket();
if($Socket == undef) {	if($Socket eq undef) {
die "did not get a socket from the connection";	die "did not get a socket from the connection";
} else {	} else {
&Debug(9,"MakeLondConnection got socket: ".$Socket);	&Debug(9,"MakeLondConnection got socket: ".$Socket);
}	}

	$Connection->SetTimeoutCallback(\&SocketTimeout);
$event = Event->io(fd => $Socket,
	my $event = Event->io(fd => $Socket,
poll => 'w',	poll => 'w',
cb => \&LondWritable,	cb => \&LondWritable,
data => $Connection,	data => $Connection,
Line 1124 sub StartRequest {	Line 1119 sub StartRequest {
$ActiveTransactions{$Lond} = $Request;	$ActiveTransactions{$Lond} = $Request;

$Lond->InitiateTransaction($Request->getRequest());	$Lond->InitiateTransaction($Request->getRequest());
$event = Event->io(fd => $Socket,	my $event = Event->io(fd => $Socket,
poll => "w",	poll => "w",
cb => \&LondWritable,	cb => \&LondWritable,
data => $Lond,	data => $Lond,
Line 1163 sub QueueTransaction {	Line 1158 sub QueueTransaction {

my $LondSocket = $IdleConnections->pop();	my $LondSocket = $IdleConnections->pop();
if(!defined $LondSocket) { # Need to queue request.	if(!defined $LondSocket) { # Need to queue request.
Debug(8,"Must queue...");	Debug(5,"Must queue...");
$WorkQueue->enqueue($requestData);	$WorkQueue->enqueue($requestData);
if($ConnectionCount < $MaxConnectionCount) {	if($ConnectionCount < $MaxConnectionCount) {
Debug(4,"Starting additional lond connection");	if($ConnectionRetriesLeft > 0) {
MakeLondConnection();	Debug(5,"Starting additional lond connection");
	if(MakeLondConnection() == 0) {
	EmptyQueue(); # Fail transactions, can't make connection.
	}
	} else {
	ShowStatus(GetServerHost()." >>> DEAD !!!! <<<");
	EmptyQueue(); # It's worse than that ... he's dead Jim.
	}
}	}
} else { # Can start the request:	} else { # Can start the request:
Debug(8,"Can start...");	Debug(8,"Can start...");
Line 1198 sub ClientRequest {	Line 1200 sub ClientRequest {
my $rv = $socket->recv($thisread, POSIX::BUFSIZ, 0);	my $rv = $socket->recv($thisread, POSIX::BUFSIZ, 0);
Debug(8, "rcv: data length = ".length($thisread)	Debug(8, "rcv: data length = ".length($thisread)
." read =".$thisread);	." read =".$thisread);
unless (defined $rv && length($thisread)) {	unless (defined $rv && length($thisread)) {
# Likely eof on socket.	# Likely eof on socket.
Debug(5,"Client Socket closed on lonc for ".$RemoteHost);	Debug(5,"Client Socket closed on lonc for ".$RemoteHost);
close($socket);	close($socket);
Line 1332 sub SetupLoncListener {	Line 1334 sub SetupLoncListener {
Child USR1 signal handler to report the most recent status	Child USR1 signal handler to report the most recent status
into the status file.	into the status file.

	We also use this to reset the retries count in order to allow the
	client to retry connections with a previously dead server.
=cut	=cut
sub ChildStatus {	sub ChildStatus {
my $event = shift;	my $event = shift;
Line 1342 sub ChildStatus {	Line 1346 sub ChildStatus {
my $fh = IO::File->new(">>$docdir/lon-status/loncstatus.txt");	my $fh = IO::File->new(">>$docdir/lon-status/loncstatus.txt");
print $fh $$."\t".$RemoteHost."\t".$Status."\t".	print $fh $$."\t".$RemoteHost."\t".$Status."\t".
$RecentLogEntry."\n";	$RecentLogEntry."\n";
	$ConnectionRetriesLeft = $ConnectionRetries;
}	}

=pod	=pod
Line 1358 sub SignalledToDeath {	Line 1363 sub SignalledToDeath {
my $watcher= $event->w;	my $watcher= $event->w;

Debug(2,"Signalled to death! via ".$watcher->data);	Debug(2,"Signalled to death! via ".$watcher->data);
my ($signal) = @_;	my ($signal) = $watcher->data;
chomp($signal);	chomp($signal);
Log("CRITICAL", "Abnormal exit. Child $$ for $RemoteHost "	Log("CRITICAL", "Abnormal exit. Child $$ for $RemoteHost "
."died through "."\"$signal\"");	."died through "."\"$signal\"");
LogPerm("F:lonc: $$ on $RemoteHost signalled to death: "	LogPerm("F:lonc: $$ on $RemoteHost signalled to death: "
."\"$signal\"");	."\"$signal\"");
die("Signal abnormal end");
exit 0;	exit 0;

}	}

	=head2 ToggleDebug

	This sub toggles trace debugging on and off.

	=cut

	sub ToggleDebug {
	my $Current = $DebugLevel;
	$DebugLevel = $NextDebugLevel;
	$NextDebugLevel = $Current;

	Log("SUCCESS", "New debugging level for $RemoteHost now $DebugLevel");

	}

=head2 ChildProcess	=head2 ChildProcess

This sub implements a child process for a single lonc daemon.	This sub implements a child process for a single lonc daemon.
Line 1380 sub ChildProcess {	Line 1400 sub ChildProcess {
#	#
# Signals must be handled by the Event framework...	# Signals must be handled by the Event framework...
#	#
# $SIG{QUIT} = \&SignalledToDeath;
# $SIG{HUP} = \&ChildStatus;
# $SIG{USR1} = IGNORE;
# $SIG{INT} = DEFAULT;
# $SIG{CHLD} = IGNORE;
# $SIG{__DIE__} = \&SignalledToDeath;

Event->signal(signal => "QUIT",	Event->signal(signal => "QUIT",
cb => \&SignalledToDeath,	cb => \&SignalledToDeath,
Line 1396 sub ChildProcess {	Line 1410 sub ChildProcess {
Event->signal(signal => "USR1",	Event->signal(signal => "USR1",
cb => \&ChildStatus,	cb => \&ChildStatus,
data => "USR1");	data => "USR1");
	Event->signal(signal => "INT",
	cb => \&ToggleDebug,
	data => "INT");

SetupTimer();	SetupTimer();

Line 1425 sub CreateChild {	Line 1442 sub CreateChild {
my $host = shift;	my $host = shift;
$RemoteHost = $host;	$RemoteHost = $host;
Log("CRITICAL", "Forking server for ".$host);	Log("CRITICAL", "Forking server for ".$host);
$pid = fork;	my $pid = fork;
if($pid) { # Parent	if($pid) { # Parent
$ChildHash{$pid} = $RemoteHost;	$RemoteHost = "Parent";
	$ChildHash{$pid} = $host;
	$HostToPid{$host}= $pid;
sigprocmask(SIG_UNBLOCK, $sigset);	sigprocmask(SIG_UNBLOCK, $sigset);

} else { # child.	} else { # child.
ShowStatus("Connected to ".$RemoteHost);	ShowStatus("Connected to ".$RemoteHost);
$SIG{INT} = DEFAULT;	$SIG{INT} = 'DEFAULT';
sigprocmask(SIG_UNBLOCK, $sigset);	sigprocmask(SIG_UNBLOCK, $sigset);
ChildProcess; # Does not return.	ChildProcess; # Does not return.
}	}
Line 1469 if ($childpid != 0) {	Line 1488 if ($childpid != 0) {
#	#

ShowStatus("Parent writing pid file:");	ShowStatus("Parent writing pid file:");
$execdir = $perlvar{'lonDaemons'};	my $execdir = $perlvar{'lonDaemons'};
open (PIDSAVE, ">$execdir/logs/lonc.pid");	open (PIDSAVE, ">$execdir/logs/lonc.pid");
print PIDSAVE "$$\n";	print PIDSAVE "$$\n";
close(PIDSAVE);	close(PIDSAVE);



if (POSIX::setsid() < 0) {	if (POSIX::setsid() < 0) {
print "Could not create new session\n";	print "Could not create new session\n";
exit -1;	exit -1;
Line 1483 ShowStatus("Forking node servers");	Line 1504 ShowStatus("Forking node servers");

Log("CRITICAL", "--------------- Starting children ---------------");	Log("CRITICAL", "--------------- Starting children ---------------");

	LondConnection::ReadConfig; # Read standard config files.
my $HostIterator = LondConnection::GetHostIterator;	my $HostIterator = LondConnection::GetHostIterator;
while (! $HostIterator->end()) {	while (! $HostIterator->end()) {

$hostentryref = $HostIterator->get();	my $hostentryref = $HostIterator->get();
CreateChild($hostentryref->[0]);	CreateChild($hostentryref->[0]);
	$HostHash{$hostentryref->[0]} = $hostentryref->[4];
$HostIterator->next();	$HostIterator->next();
}	}
$RemoteHost = "Parent Server";	$RemoteHost = "Parent Server";
Line 1504 $SIG{INT} = \&Terminate;	Line 1527 $SIG{INT} = \&Terminate;
$SIG{TERM} = \&Terminate;	$SIG{TERM} = \&Terminate;
$SIG{HUP} = \&Restart;	$SIG{HUP} = \&Restart;
$SIG{USR1} = \&CheckKids;	$SIG{USR1} = \&CheckKids;
	$SIG{USR2} = \&UpdateKids; # LonManage update request.

while(1) {	while(1) {
$deadchild = wait();	my $deadchild = wait();
if(exists $ChildHash{$deadchild}) { # need to restart.	if(exists $ChildHash{$deadchild}) { # need to restart.
$deadhost = $ChildHash{$deadchild};	my $deadhost = $ChildHash{$deadchild};
	delete($HostToPid{$deadhost});
delete($ChildHash{$deadchild});	delete($ChildHash{$deadchild});
Log("WARNING","Lost child pid= ".$deadchild.	Log("WARNING","Lost child pid= ".$deadchild.
"Connected to host ".$deadhost);	"Connected to host ".$deadhost);
Line 1538 sub CheckKids {	Line 1563 sub CheckKids {
my $now=time;	my $now=time;
my $local=localtime($now);	my $local=localtime($now);
print $fh "LONC status $local - parent $$ \n\n";	print $fh "LONC status $local - parent $$ \n\n";
foreach $pid (keys %ChildHash) {	foreach my $pid (keys %ChildHash) {
Debug(2, "Sending USR1 -> $pid");	Debug(2, "Sending USR1 -> $pid");
kill 'USR1' => $pid; # Tell Child to report status.	kill 'USR1' => $pid; # Tell Child to report status.
sleep 1; # Wait so file doesn't intermix.	sleep 1; # Wait so file doesn't intermix.
Line 1547 sub CheckKids {	Line 1572 sub CheckKids {

=pod	=pod

	=head1 UpdateKids

	parent's SIGUSR2 handler. This handler:

	=item

	Rereads the hosts file.

	=item

	Kills off (via sigint) children for hosts that have disappeared.

	=item

	QUITs children for hosts that already exist (this just forces a status display
	and resets the connection retry count for that host.

	=item

	Starts new children for hosts that have been added to the hosts.tab file since
	the start of the master program and maintains them.

	=cut

	sub UpdateKids {

	Log("INFO", "Updating connections via SIGUSR2");

	# Just in case we need to kill our own lonc, we wait a few seconds to
	# give it a chance to receive and relay lond's response to the
	# re-init command.
	#

	sleep(2); # Wait a couple of seconds.

	my %hosts; # Indexed by loncapa hostname, value=ip.

	# Need to re-read the host table:


	LondConnection::ReadConfig();
	my $I = LondConnection::GetHostIterator;
	while (! $I->end()) {
	my $item = $I->get();
	$hosts{$item->[0]} = $item->[4];
	$I->next();
	}

	# The logic below is written for clarity not for efficiency.
	# Since I anticipate that this function is only rarely called, that's
	# appropriate. There are certainly ways to combine the loops below,
	# and anyone wishing to obscure the logic is welcome to go for it.
	# Note that we don't re-direct sigchild. Instead we do what's needed
	# to the data structures that keep track of children to ensure that
	# when sigchild is honored, no new child is born.
	#

	# For each existing child; if it's host doesn't exist, kill the child.

	foreach my $child (keys %ChildHash) {
	my $oldhost = $ChildHash{$child};
	if (!(exists $hosts{$oldhost})) {
	Log("CRITICAL", "Killing child for $oldhost host no longer exists");
	delete $ChildHash{$child};
	delete $HostToPid{$oldhost};
	kill 'QUIT' => $child;
	}
	}
	# For each remaining existing child; if it's host's ip has changed,
	# Restart the child on the new IP.

	foreach my $child (keys %ChildHash) {
	my $oldhost = $ChildHash{$child};
	my $oldip = $HostHash{$oldhost};
	if ($hosts{$oldhost} ne $oldip) {

	# kill the old child.

	Log("CRITICAL", "Killing child for $oldhost host ip has changed...");
	delete $ChildHash{$child};
	delete $HostToPid{$oldhost};
	kill 'QUIT' => $child;

	# Do the book-keeping needed to start a new child on the
	# new ip.

	$HostHash{$oldhost} = $hosts{$oldhost};
	CreateChild($oldhost);
	}
	}
	# Finally, for each new host, not in the host hash, create a
	# enter the host and create a new child.
	# Force a status display of any existing process.

	foreach my $host (keys %hosts) {
	if(!(exists $HostHash{$host})) {
	Log("INFO", "New host $host discovered in hosts.tab...");
	$HostHash{$host} = $hosts{$host};
	CreateChild($host);
	} else {
	kill 'HUP' => $HostToPid{$host}; # status display.
	}
	}
	}


	=pod

=head1 Restart	=head1 Restart

Signal handler for HUP... all children are killed and	Signal handler for HUP... all children are killed and
Line 1556 the config file.	Line 1689 the config file.
=cut	=cut

sub Restart {	sub Restart {
KillThemAll; # First kill all the children.	&KillThemAll; # First kill all the children.
Log("CRITICAL", "Restarting");	Log("CRITICAL", "Restarting");
my $execdir = $perlvar{'lonDaemons'};	my $execdir = $perlvar{'lonDaemons'};
unlink("$execdir/logs/lonc.pid");	unlink("$execdir/logs/lonc.pid");
exec("$execdir/lonc");	exec("$execdir/loncnew");
}	}

=pod	=pod
Line 1568 sub Restart {	Line 1701 sub Restart {
=head1 KillThemAll	=head1 KillThemAll

Signal handler that kills all children by sending them a	Signal handler that kills all children by sending them a
SIGINT. Responds to sigint and sigterm.	SIGHUP. Responds to sigint and sigterm.

=cut	=cut

sub KillThemAll {	sub KillThemAll {
Debug(2, "Kill them all!!");	Debug(2, "Kill them all!!");
local($SIG{CHLD}) = 'IGNORE'; # Our children >will< die.	local($SIG{CHLD}) = 'IGNORE'; # Our children >will< die.
foreach $pid (keys %ChildHash) {	foreach my $pid (keys %ChildHash) {
my $serving = $ChildHash{$pid};	my $serving = $ChildHash{$pid};
Debug(2, "Killing lonc for $serving pid = $pid");	Debug(2, "Killing lonc for $serving pid = $pid");
ShowStatus("Killing lonc for $serving pid = $pid");	ShowStatus("Killing lonc for $serving pid = $pid");
Log("CRITICAL", "Killing lonc for $serving pid = $pid");	Log("CRITICAL", "Killing lonc for $serving pid = $pid");
kill('INT', $pid);	kill 'QUIT' => $pid;
delete($ChildeHash{$pid});	delete($ChildHash{$pid});
}	}
my $execdir = $perlvar{'lonDaemons'};	my $execdir = $perlvar{'lonDaemons'};
unlink("$execdir/logs/lonc.pid");	unlink("$execdir/logs/lonc.pid");
ShowStatus("Killing the master process");
Log("CRITICAL", "Killing the master process.");
}	}

=pod	=pod
Line 1599 Terminate the system.	Line 1731 Terminate the system.

sub Terminate {	sub Terminate {
KillThemAll;	KillThemAll;
exit;	Log("CRITICAL","Master process exiting");
	exit 0;

}	}
=pod	=pod

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>

Removed from v.1.15
changed lines
	Added in v.1.34